Search Results

Search found 18729 results on 750 pages for 'edit'.

Page 672/750 | < Previous Page | 668 669 670 671 672 673 674 675 676 677 678 679  | Next Page >

• Windows 7 losing one of my displays after restart

  - by j_kubik

  I have an Intel DZ68BC motherboard with Intel HD graphics card using two monitors (on DVI and on HDMI » VGA). My friend asked me to test if his NVIDIA graphics card works well on my computer (at his it was doing some trouble), so I inserted it in my computer, installed the NVIDIA driver and it worked quite well. Then I removed it, uninstalled everything NVIDIA-related I could find and switched monitors back to my Intel card. Since then after every system start/restart, the system sees only monitor on HDMI » VGA connector, completely ignoring the DVI monitor. I noticed that installing the Intel video drivers causes the system to recognize the second monitor if I don't immediately reboot. After a reboot, the system recognizes only the HDMI » VGA monitor. I also tried starting in safe-mode and using DriveSweeper to remove the remains of NVIDIA drivers. While it seems that some drivers were removed, the situation didn't change. Now I am out of ideas and I really wouldn't like to reinstall the system (again...). I also tried restoring the system to the state before this whole story, but it also didn't change anything. EDIT: I am still trying to troubleshoot this problem. The only point that I could start was driver re-instalation. I traced down the part that restores right settings to a call: C:\Users\Jarek\Desktop\GFX_Win7_64_8.15.10.2696\x64\Drv64.exe -driverinf "C:\Users\Jarek\Desktop\GFX_Win7_64_8.15.10.2696\Graphics\igdlh64.inf" -flags 20 -keypath "Software\Intel\Difx64" This call fixes my displays, and as workaround, I will add it for now to my autorun. I am still looking for better solution anyway... EDIT2: Using DriverView i made a list of currently used drivers both before and after fixing my display using above command. Then i compared logs: No drivers were removed by fixing command. Drivers added by fixing command: MS Remote Access serial network driver (asyncmac.sys) security processor (spsys.sys) Drivers that changed base address (indicates driver-reload?) Canonical Display Driver (cdd.dll) Intel Graphics Kernel Mode Driver (igdkmd64.sys) Monitor Driver (monitor.sys) Added drivers seem rather unrelated to the problem to me, reloaded drivers are just a cnsequence of installing new driver file so there is not much to go here... I really cannot make heads or tails out of it...

  Read the article

• git private server error: "Permission denied (publickey)."

  - by goddfree

  I followed the instructions here in order to set up a private git server on my Amazon EC2 instance. However, I am having problems when trying to SSH into the git account. Specifically, I get the error "Permission denied (publickey)." Here are the permissions of my files/folders on the EC2 server: drwx------ 4 git git 4096 Aug 13 19:52 /home/git/ drwx------ 2 git git 4096 Aug 13 19:52 /home/git/.ssh -rw------- 1 git git 400 Aug 13 19:51 /home/git/.ssh/authorized_keys Here are the permissions of my files/folders on my own computer: drwx------ 5 CYT staff 170 Aug 13 14:51 .ssh -rw------- 1 CYT staff 1679 Aug 13 13:53 .ssh/id_rsa -rw-r--r-- 1 CYT staff 400 Aug 13 13:53 .ssh/id_rsa.pub -rw-r--r-- 1 CYT staff 1585 Aug 13 13:53 .ssh/known_hosts When checking my logs in /var/log/secure, I used to get the following error message every time I tried to SSH: Authentication refused: bad ownership or modes for file /home/git/.ssh/authorized_keys However, after making a few permission changes, I no longer get this error message. Despite this, I am still getting the "Permission denied (publickey)." message every time I try to SSH. The command I am using to SSH is ssh -T git@my-ip. Here is the full log I get when I run ssh -vT [email protected]: OpenSSH_6.2p2, OSSLShim 0.9.8r 8 Dec 2011 debug1: Reading configuration data /etc/ssh_config debug1: /etc/ssh_config line 20: Applying options for * debug1: Connecting to my-ip [my-ip] port 22. debug1: Connection established. debug1: identity file /Users/CYT/.ssh/id_rsa type -1 debug1: identity file /Users/CYT/.ssh/id_rsa-cert type -1 debug1: identity file /Users/CYT/.ssh/id_dsa type -1 debug1: identity file /Users/CYT/.ssh/id_dsa-cert type -1 debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_6.2 debug1: Remote protocol version 2.0, remote software version OpenSSH_6.2 debug1: match: OpenSSH_6.2 pat OpenSSH* debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr [email protected] none debug1: kex: client->server aes128-ctr [email protected] none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Server host key: RSA 08:ad:8a:bc:ab:4d:5f:73:24:b2:78:69:46:1a:a5:5a debug1: Host 'my-ip' is known and matches the RSA host key. debug1: Found key in /Users/CYT/.ssh/known_hosts:1 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Trying private key: /Users/CYT/.ssh/id_rsa debug1: Trying private key: /Users/CYT/.ssh/id_dsa debug1: No more authentication methods to try. Permission denied (publickey). I have spent a few hours going through threads on various sites, including SO and SF, looking for a solution. It seems that the permissions for my files are all okay, but I just can't figure out the problem. Any help would be greatly appreciated. Edit: EEAA: Here are the outputs you requested: $ getent passwd git git:x:503:504::/home/git:/bin/bash $ grep ssh ~git/.ssh/authorized_keys | wc -l grep: /home/git/.ssh/authorized_keys: Permission denied 0

  Read the article

• .htaccess ignored, SPECIFIC to EC2 - not the usual suspects

  - by tedneigerux

  I run 8-10 EC2 based web servers, so my experience is many hours, but is limited to CentOS; specifically Amazon's distribution. I'm installing Apache using yum, so therefore getting Amazon's default compilation of Apache. I want to implement canonical redirects from non-www (bare/root) domain to www.domain.com for SEO using mod_rewrite BUT MY .htaccess FILE IS CONSISTENTLY IGNORED. My troubleshooting steps (outlined below) lead me to believe it's something specific to Amazon's build of Apache. TEST CASE Launch a EC2 Instance, e.g. Amazon Linux AMI 2013.03.1 SSH to the Server Run the commands: $ sudo yum install httpd $ sudo apachectl start $ sudo vi /etc/httpd/conf/httpd.conf $ sudo apachectl restart $ sudo vi /var/www/html/.htaccess In httpd.conf I changed the following, in the DOCROOT section / scope: AllowOverride All In .htaccess, added: (EDIT, I added RewriteEngine On later) RewriteCond %{HTTP_HOST} ^domain\.com$ [NC] RewriteRule ^/(.*) http://www.domain.com/$1 [R=301,L] Permissions on .htaccess are correct, AFAI can tell: $ ls -al /var/www/html/.htaccess -rwxrwxr-x 1 git apache 142 Jun 18 22:58 /var/www/html/.htaccess Other info: $ httpd -v Server version: Apache/2.2.24 (Unix) Server built: May 20 2013 21:12:45 $ httpd -M Loaded Modules: core_module (static) ... rewrite_module (shared) ... version_module (shared) Syntax OK EXPECTED BEHAVIOR $ curl -I domain.com HTTP/1.1 301 Moved Permanently Date: Wed, 19 Jun 2013 12:36:22 GMT Server: Apache/2.2.24 (Amazon) Location: http://www.domain.com/ Connection: close Content-Type: text/html; charset=UTF-8 ACTUAL BEHAVIOR $ curl -I domain.com HTTP/1.1 200 OK Date: Wed, 19 Jun 2013 12:34:10 GMT Server: Apache/2.2.24 (Amazon) Connection: close Content-Type: text/html; charset=UTF-8 TROUBLESHOOTING STEPS In .htaccess, added: BLAH BLAH BLAH ERROR RewriteCond %{HTTP_HOST} ^domain\.com$ [NC] RewriteRule ^/(.*) http://www.domain.com/$1 [R=301,L] My server threw an error 500, so I knew the .htaccess file was processed. As expected, it created an Error log entry: [Wed Jun 19 02:24:19 2013] [alert] [client XXX.XXX.XXX.XXX] /var/www/html/.htaccess: Invalid command 'BLAH BLAH BLAH ERROR', perhaps misspelled or defined by a module not included in the server configuration Since I have root access on the server, I then tried moving my rewrite rule directly to the httpd.conf file. THIS WORKED. This tells us several important things are working. $ curl -I domain.com HTTP/1.1 301 Moved Permanently Date: Wed, 19 Jun 2013 12:36:22 GMT Server: Apache/2.2.24 (Amazon) Location: http://www.domain.com/ Connection: close Content-Type: text/html; charset=UTF-8 HOWEVER, it is bothering me that it didn't work in the .htaccess file. And I have other use cases where I need it to work in .htaccess (e.g. an EC2 instance with named virtual hosts). Thank you in advance for your help.

  Read the article

• Can not get sound over hdmi in kubuntu 9.10

  - by user32509

  I have used a hdmi cable to connect my lcd (which is connected with my speakers) with my nvida 275 gtx grafic card. I can not get the sound output to work. The hardware itself is working probably - I tested it under windows. Currently I am running Kubuntu 9.10 64 with Nvidia 190.53. The sound output worked fine before I installed the hdmi connection. (German output - i can change it, if you tell me how :)) aplay -l **** Liste von PLAYBACK Geräten **** Karte 0: Intel [HDA Intel], Gerät 0: ALC889A Analog [ALC889A Analog] Untergeordnete Geräte: 1/1 Untergeordnetes Gerät '0: subdevice #0 Karte 0: Intel [HDA Intel], Gerät 1: ALC889A Digital [ALC889A Digital] Untergeordnete Geräte: 1/1 Untergeordnetes Gerät '0: subdevice #0 aplay -L front:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog Front speakers surround40:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=Intel,DEV=0 HDA Intel, ALC889A Digital IEC958 (S/PDIF) Digital Audio Output null Discard all samples (playback) or generate zero samples (capture) pulse Playback/recording through the PulseAudio sound server And i disabled mute in kmix an all channels :) Edit: lspci -v ... 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02) Subsystem: Giga-byte Technology Device a022 Flags: bus master, fast devsel, latency 0, IRQ 22 Memory at ea400000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel <?> Capabilities: [130] Root Complex Link <?> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel ... cat /proc/asound/version Advanced Linux Sound Architecture Driver Version 1.0.20. lsmod | grep snd_hda_intel snd_hda_intel 31880 2 snd_hda_codec 87584 2 snd_hda_codec_realtek,snd_hda_intel snd_pcm 93160 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss snd 77096 16 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device snd_page_alloc 10928 2 snd_hda_intel,snd_pcm I think I am missing the something-hdmi module? Is there such a thing?

  Read the article

• Trying to setup virtual hosts on unix PHP on nginx

  - by user1634653

  I have tried to install php5-fpm and Nginx on Ubuntu machine, but I got a problem. When I have only one virtual host on a unix port it is all fine but when I try to add another virtual host Nginx goes to default web page "Welcome to Nginx!" but when I run it on a tcp port example port 9000 it work fine with multisites. It is a fresh install of ubuntu 11.10, Nginx 1.2.3 with php5-fpm installed. It also has extra php installs such as php-apc. I can only give the links to the virtual hosts because I am doing it from a mobile phone. Here are the links for the two virtual hosts I am using: http://ic0nic.co.uk/ic0nic.txt, http://ic0nic.co.uk/sourproxy.txt also I want to use unix port because I find it a whole lot faster. Edit: Here are the nginx configs server { server_name ic0nic.co.uk www.ic0nic.co.uk; root /var/www/ic0nic.co.uk; listen 8080; index index.html index.htm index.php; include conf.d/drop; location / { try_files $uri $uri/ /index.php?q=$uri&$args; } location ~ \.php$ { fastcgi_buffers 8 256k; fastcgi_buffer_size 128k; fastcgi_intercept_errors on; include fastcgi_params; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_pass unix:/dev/shm/php-fpm-www.sock; root /var/www/ic0nic.co.uk; } } server { server_name sourproxy.co.uk www.sourproxy.co.uk; root /var/www/sourproxy.co.uk/; listen 8080; index index.html index.htm index.php; include conf.d/drop; location / { try_files $uri $uri/ /index.php?q=$uri&$args; } location ~ \.php$ { fastcgi_buffers 8 256k; fastcgi_buffer_size 128k; fastcgi_intercept_errors on; include fastcgi_params; fastcgi_param SCRIPT_FILENAME /var/www/sourproxy.co.uk$fastcgi_script_name; fastcgi_pass unix:/dev/shm/php-fpm-www.sock; } }

  Read the article

• cd Command Linux and Mystery Flags

  - by Jason R. Mick

  Platform: CentOS 6.2 Shell:tcsh I'm playing around with cd for a BASH script, and noticed the wondrous cd - option, but was left with many questions... Why the cd -? Isn't this redundant with cd ..? EDIT [As FatalError points out, these two commands don't do the same things... so the answer is "no"] Can you delve farther back into your history with - flag, a la in a browser? e.g. When I type cd -, it takes me to my previous directory, but then if I enter that command again, it takes me to the directory I just came from, creating a sort of loop. Is a shorthand for going back multiple levels supported?EDITI realize I can go back with cd .., but was hoping this could be a gateway to a less verbose deep back, e.g. cd -3 vs. cd ../../../ ... hopefully that clarifies what I'm asking....EDIT2As to the current feedback, while .. is a special directory, I don't see a reason why the built-in cd to the terminal couldn't use a shorthand for ../../ ... ../ e.g. cd ..5 or why the built-in also couldn't have a history (a la auto pushd/popd) that could be turned on and used like cd -3. I get that this could be somewhat of security/privacy risk, but I don't see how it's any worst than storing a command history, which most shells/terminals do. The manpage for cd, accessible via man cd and help cd (it's the same for either command), only lists -L and -P flags. However when I type in cd --help it outputs Usage: cd [-plvn][-|<dir>].. Am I right in assuming the other flags and the - (back) option are nonstandard? What are the -n and -v flags for? Both seem to take me back to my home directory, that's all I've been able to figure out via experimentation. A quick read on web resources [1][2] offered just the same sort of info that the man page did and didn't answer my questions. Note: The second Linux-centric resource above claimed cd only had two options (obviously not true in current CentOS) hence my assumption that this functionality could be non-standard.

  Read the article

• Laptops on Windows Domain sometimes have problems accessing internet when off-site

  - by FSUScoot

  Hi all-- We've had this problem for a long time. When users travel, sometimes they can't get internet access from a wired or wireless connection. Here are a couple examples: 1) A user goes to a hotel and tries to access the wireless in their room. They can connect to the access point. They open a web browser and they can't get re-directed to the hotel's login page. Because they can't log in, there's no internet access. 2) A user goes to another laboratory/university and tries to access the wired network. They connect, link is fine, PC gets IP from DHCP but no internet access. There's no login page to be re-directed to. It should just "work". What I've found is that it's a DNS issue. Because the computer is on a Windows Domain, it seems it MUST use our DNS servers. Even if you connect to an outside network and do an ipconfig /all, it looks like everything is ok. It'll even show their DNS servers listed in the config. The computer just won't use the other network's DNS server. I found a reg key that keeps our DNS servers listed and it seems that they take priority every time: HKLM\SOFTWARE\Policies\Microsoft\Windows NT\DNSClient All the values under that key are for our AD domain. NameServer and Searchlist never change. What I've found is if the user edits the NameServer string and puts the DNS server of the network they're on, everything works just fine. They get re-directed to the hotel's correct login page or their internet access starts working. It's only a problem if the network they're on blocks outside DNS or a hotel that uses an internal name in their front page redirection that only their DNS server knows about, i.e., not public. If the re-direct page starts with an IP, like 10.10.10.10, it'll work just fine. Obviously this isn't a fix for everyone. Most of my users are pretty knowledgeable so it’s easy for me to walk them through or send them a .reg file that they can edit and run. This problem isn't limited to Windows 7. It was like this with XP as well. It's not hardware related. The problem exists on both wired and wireless, Intel or Broadcom, laptops or desktops. Anyone else have this problem? Is there a GPO I can change that I missed? Got a good work-around for this? Thanks for any help!

  Read the article

• Mouse Error Code 24. Windows 7

  - by Cj.

  I've had the same mouse for a while, and it's been working fine until one day, it started giving me a message about a device not working properly. I tried updating the drivers, and re-installing, I even deleted old drivers in case my computer should be a little confused. It never made a difference, and my mouse seemed to be working just fine despite getting the permanent error in my device manager, I looked it up several times online, but I never found anything I could actually use, when I go to official websites, I always get the same response "plug in so so into a different place - drivers - install silverlight before you can watch this tutorial, try it on a different machine". so I gave up on that. But now is where I have a real problem, lately, my little strange error evolved into a fullblown Error 24, and my mouse is starting to turn on and off randomely, especially when it is being used, but I do hear it go "badum..dadum" when I'm off doing something else. when I looked up error code 24, I really didn't find much other than it meaning: Code 24 This device is not present, is not working properly, or does not have all its drivers installed. (Code 24) Cause The device is installed incorrectly. The problem could be a hardware failure, or a new driver might be needed. Devices stay in this state if they have been prepared for removal. After you remove the device, this error disappears. But, I have tried uninstalling the device entirely several times, and it'll go right back to its previous state with error 24, and turning on and off randomely. what do I do? I cannot afford taking it to a repair place, I can't really afford a new mouse either, I refuse to buy cheap ones as I am a gamer, in need of more than 3 buttons, and a good grip is important. Could there possibly be some confusion in the registry? I do remember having gotten some early problems after I converted my vista to windows7. But I hardly dare going in there unless I'm 100% certain of what I'm going for, and I can honestly say I am at a loss here. Edit: it is a USB mouse we're talking about here. MX™518 Optical Gaming Mouse (logitech) Edit2: I am seeing no rupture, so it must be on the inside of my mouse, or inside the rubber, protecting the cable, that would be really inconvenient to search for

  Read the article

• My VPS ubuntu server is very slow

  - by askmike

  I just installed a frech copy of Ubuntu 12.04 on my vps because my old installation was very slow, unfortunately this did not fix the problem. With slow I mean requests for my PHP websites take a long time, very slow (30 sec per request) to slow (3+ sec per request). When it's really bad SSH is also laggish. The websites are: askmike.org (pretty standard Wordpress) mvr.me (own PHP) slow? very slow: Here is a picture of loading a clean install of wordpress slow: here is a picture of loading a small PHP based website the vps The VPS has 256mb ram and an 25GB hdd. Besides serving the 2 small websites it isn't doing anything AFAIK. What have I installed Clean Ubuntu server 12.04 LAMP stack few things like git and nodejs (not using both) ossec (because I thought my server was getting hammered) munin What I already tried / done I installed munin so that I could watch io speed and such. The problem is that I don't know where to look for in the munin report. I checked logs and don't see anything strange (although I don't really know where to look for besides strange / repetitive errors and GET requests). I configured Apache MPM to: <IfModule mpm_prefork_module> StartServers 5 MinSpareServers 5 MaxSpareServers 10 MaxClients 40 MaxRequestsPerChild 0 </IfModule> (apache is using prefork, the default) Stats I copied the munin report as it appeared at 4:50 last night to a site hosted on a shared webhost. Note that tonight my mysql crashed somewhere after 1:00 (which is a new problem altogether), so therefor the graph for last night might look strange. Can anyone help me get my VPS up to normal speed? EDIT: Thanks for the replies. The VPS is 10 bucks a month and is from directvps.nl (Dutch host and I'm also dutch). I did two speed tests for disk IO: $ dd if=/dev/zero of=test bs=64k count=16k conv=fdatasync 1073741824 bytes (1.1 GB) copied, 23.1506 s, 46.4 MB/s $ dd if=/dev/zero of=test bs=64k count=16k conv=fdatasync 1073741824 bytes (1.1 GB) copied, 39.3796 s, 27.3 MB/s Anyway: how can I prove to my VPS host that it is to slow? I can understand a server being busy slowing a website down. But 5-30 sec loadtime for a normal PHP webpage?

  Read the article

• CPanel has two entries for site, need to use SSL one

  - by beingalex

  I have a website that is meant to be using SSL, however there are two entries in Cpanel's httpd.conf which seem to be causing an issue. When I visit just www.website.com I require it to go to https://www.website.com. However I have to write the https:// directly for the site to work. The secure site also has a different IP. I am not meant to edit the httpd.conf directly either and am unsure as to how to change the following directives: <VirtualHost 1.1.1.1:80> ServerName website.com ServerAlias www.website.com DocumentRoot /home/websitec/public_html ServerAdmin [email protected] ## User websitec # Needed for Cpanel::ApacheConf <IfModule mod_suphp.c> suPHP_UserGroup websitec websitec </IfModule> <IfModule !mod_disable_suexec.c> <IfModule !mod_ruid2.c> SuexecUserGroup websitec websitec </IfModule> </IfModule> <IfModule mod_ruid2.c> RUidGid websitec websitec </IfModule> CustomLog /usr/local/apache/domlogs/website.com-bytes_log "%{%s}t %I .\n%{%s}t %O ." CustomLog /usr/local/apache/domlogs/website.com combined ScriptAlias /cgi-bin/ /home/websitec/public_html/cgi-bin/ </VirtualHost> <VirtualHost 2.2.2.2:443> ServerName website.com ServerAlias www.website.com DocumentRoot /home/websitec/public_html ServerAdmin [email protected] UseCanonicalName Off CustomLog /usr/local/apache/domlogs/website.com combined CustomLog /usr/local/apache/domlogs/website.com-bytes_log "%{%s}t %I .\n%{%s}t %O ." ## User websitec # Needed for Cpanel::ApacheConf <IfModule mod_suphp.c> suPHP_UserGroup websitec websitec </IfModule> <IfModule !mod_disable_suexec.c> <IfModule !mod_ruid2.c> SuexecUserGroup websitec websitec </IfModule> </IfModule> <IfModule mod_ruid2.c> RUidGid websitec websitec </IfModule> ScriptAlias /cgi-bin/ /home/websitec/public_html/cgi-bin/ SSLEngine on SSLCertificateFile /etc/ssl/certs/www.website.com.crt SSLCertificateKeyFile /etc/ssl/private/www.website.com.key SSLCACertificateFile /etc/ssl/certs/www.website.com.cabundle CustomLog /usr/local/apache/domlogs/website.com-ssl_log combined SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown <Directory "/home/websitec/public_html/cgi-bin"> SSLOptions +StdEnvVars </Directory> # To customize this VirtualHost use an include file at the following location # Include "/usr/local/apache/conf/userdata/ssl/2/websitec/website.com/*.conf" </VirtualHost> As you can see there is obviously the unsecure directive before the secure one. And this is probably the issue, however if I try to change the IP for the site in WHM I get an error saying that the IP (2.2.2.2) is already in use. Which it is I guess. Any help is appreciated.

  Read the article

• How to configure apache's mod_proxy_html to work as an ajax proxy?

  - by dcerecedo

  I'm trying to build a web site that let's you view and manipulate data from any page in any other website. To do that, I have to bypass 'Allow Origin' problems: i'm loading the other domain's content in an iframe and i have to manipulate its content with javascript downloaded from my domain. My first attempt was to write a simple proxy myself, requesting the other domains page through a server proxy coded in Java that not only serves the content but rebuilds links (src's and href's) in the content so that the content referenced by these links alse get downloaded through my handmade proxy. The result is not bad but has problems with url's in css and scripts. It's then that i realized that mod_proxy_html is supposed to do exactly all this job. The problem is that i cannot figure out how to make it work as expected. Let's suppose my server runs in my-domain.com and to proxy and transform content from another domain i'd make a request like this: my-domain.com/proxy?url=http://another-domain.com/some/content I'd want mod_proxy_html to serve the content and rewrite following URLs in http://another-domain.com/some/content in the following ways: Absolute URLs not from another-domain.com: no rewritting Relative from root urls:/other/content - /proxy?url=http://another-domain.com/other/content Relative urls: other/content - /proxy?url=http://another-domain.com/some/content/other/content Relative to parent urls: ../other/content - /proxy?url=http://another-domain.com/some/other/content The url should be specified at runtime, not configuration time. Can this be achieved with mod_proxy_html? Could anyone provide a simple working configuration to start with? EDIT 1-First approach The following site config will work fine with sites that use absolute url's everywhere like http://www.huffingtonpost.es/. Youc could try on this config on localhost: http://localhost/asset/http://www.huffingtonpost.es/ <VirtualHost *:80> ServerName localhost LogLevel debug ProxyRequests off RewriteEngine On RewriteRule ^/asset/(.*) $1 [P] ProxyHTMLURLMap $1 /asset/ <Location /asset/> ProxyPassReverse / ProxyHTMLURLMap / /asset/ </Location> </VirtualHost> But as explained in the documentation, if I hit a site using relative url's, I'd like to have these rewritten on the html via mod_proxy_html. So I shoud change the Location block as follows: <Location /asset/> ProxyPassReverse / #Depending on your system use one line or the other #Ubuntu: #SetOutputFilter proxy-html #any other system: ProxyHTMLEnable On ProxyHTMLURLMap / /asset/ </Location> ...which doesn't seem to work. Comments, hints and ideas welcome!

  Read the article

• Apache certificates for some urls not working

  - by Vegaasen

  We are having a rather strange problem with a Apache-installation. Here is a short summary: Currently I'm setting up Apache with https, and server-certificates. This is fairly easy and works straight out of the box - as expected. This is the configuration for this setup: Listen 443 SSLEngine on SSLCertificateFile "/progs/apache/ssl/example-site.no.pem" SSLCertificateKeyFile "/progs/apache/ssl/example-site.no.key" SSLCACertificateFile "/progs/apache/ssl/ca/example_root.pem" SSLCADNRequestFile "/progs/apache/ssl/ca/example_intermediate.pem" SSLVerifyClient none SSLVerifyDepth 3 SSLOptions +StdEnvVars +ExportCertData RequestHeader set ssl-ClientCert-Subject-CN "%{SSL_CLIENT_S_DN}s" RewriteEngine On ProxyPreserveHost On ProxyRequests On SSLProxyEngine On ... <LocationMatch /secureStuff/$> SSLVerifyClient require Order deny,allow Allow from All </LocationMatch> ... <Proxy balancer://exBalancer> Header add Set-Cookie "EX_ROUTE=EB.%{BALANCER_WORKER_ROUTE}e; path=/" env=BALANCER_ROUTE_CHANGED BalancerMember http://10.0.0.1:7200 route=ee1 retry=300 flushpackets=off keepalive=on BalancerMember http://10.0.0.2:7200 route=ee2 retry=300 flushpackets=off keepalive=on status=+H ProxySet stickysession=EX_ROUTE scolonpathdelim=Off timeout=10 nofailover=off failonstatus=505 maxattempts=1 lbmethod=bybusyness Order deny,allow Allow from all </Proxy> RewriteCond %{REQUEST_URI} !^/index.html [NC] RewriteRule ^/(.*)$ balancer://exBalancer/$1 [P,NC] ProxyPassReverse / balancer://exBalancer/ Header edit Set-Cookie "(.*)" "$1;HttpsOnly" ... So - everything works fine and as expected for all of the pages that are not a part of the LocationMatch-directive. When requesting something that matches the LocationMatch-directive, I'm asked for a certificate (hence the SSLVerifyClient required attribute) - and getting all the correct certificates in my browser that is based on the root/intermediate chain. After choosing a certificate and clicking "OK", this is what pops up in the apache logs: [ssl:info] [pid 9530:tid 25] [client :43357] AH01998: Connection closed to child 86 with abortive shutdown ( [Thu Oct 11 09:27:36.221876 2012] [ssl:debug] [pid 9530:tid 25] ssl_engine_io.c(1171): (70014)End of file found: [client 10.235.128.55:45846] AH02007: SSL handshake interrupted by system [Hint: Stop button pressed in browser?!] And this just spams the logs. What is happening here? I can see this configuration working on my local machine, but not on one of our servers. There is no configration differences between the servers, only minor application-wise-changes. I've tried the following: 1) Removing CA-certificate-checking (works) 2) Adding required CA-certificate for the whole site (works) 3) Adding "SSLVerifyClient optional" does not work 4) ++ Server/Application Information Local: -OpenSSL v.1.0.1x -Apache 2.4.3 -Ubuntu -mpm: event -every configuration should be turned on (failing) server: -OpenSSL 0.9.8e -Apache 2.4.2 -SunOS -mpm: worker -every configuration should be turned on Please let me know if more information is needed, I'll provide it instantly. Brief sum-up: -Running apache 2.4 -Server certificates works just fine -Client certificates for some /Locations does not work, fails with errors PS: Could it be related with the OpenSSL version and the "Renegotiation" stuff related to TLS/SSLv3?

  Read the article

• Serving protected files using Nginx's X-Accel-Redirect header

  - by andybak

  I'm trying to serve protected files using this directive in my nginx.conf: location /secure/ { internal; alias /home/ldr/webapps/nginx/app/secure/; } I'm passing in paths in the form: "/myfile.doc" and the file's path would be: /home/ldr/webapps/nginx/app/secure/myfile.doc I just get 404's when I access "http: //myserver/secure/myfile.doc" (space inserted after http to stop ServerFault converting it to a link) I've tried taking the trailing / off the location directive and that makes no difference. Two questions: How do I fix it! How can I debug problems like this myself? How can I get Nginx to report which path it's looking for? error.log shows nothing and access.log just tells me which url is being requested - this is the bit I already know! It's no fun trying things randomly without any feedback. Here's my entire nginx.conf: daemon off; worker_processes 2; events { worker_connections 1024; } http { include mime.types; default_type application/octet-stream; server { listen 21534; server_name my.server.com; client_max_body_size 5m; location /media/ { alias /home/ldr/webapps/nginx/app/media/; } location / { proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; fastcgi_pass unix:/home/ldr/webapps/nginx/app/myproject/django.sock; fastcgi_pass_header Authorization; fastcgi_hide_header X-Accel-Redirect; fastcgi_hide_header X-Sendfile; fastcgi_intercept_errors off; include fastcgi_params; } location /secure { internal; alias /home/ldr/webapps/nginx/app/secure/; } } } EDIT: I'm trying some of the suggestions here So I've tried: location /secure/ { internal; alias /home/ldr/webapps/nginx/app/; } both with and without the trailing slash on location. I've also tried moving this block before the "location /" directive. The page I linked to has ^~ after 'location' giving: location ^~ /secure/ { ...etc... Not sure what that signifies but it didn't work either!

  Read the article

• Pushing Large Files to 500+ Computers [closed]

  - by WMIF

  I work with a team to manage 500-600 rented Windows 7 computers for an annual conference. We have a large amount of data that needs to be synced to these computers, up to 1 TiB. The computers are divided into rooms and connected through unmanaged gigabit switches. We prepare these computers ahead of time with the Windows installation and configuration, plus any files that we have available to us before we send the base image in for replication by the rental company. Every year, we have presenters approach on site with up to gigs of data that need to be pushed to the room that they will be presenting in. Sometimes they only have a few files that are small sizes, such as a slide PDF, but can sometimes be much larger 5 GiB. Our current strategy for pushing these files is using batch scripts and RoboCopy. For the large pushes, we actually use a BitTorrent client to generate a torrent file, and then we use the batch-RoboCopy to push the torrent into a folder on the remote machines that is being monitored by an installed BT client. Often times, this data needs to be pushed immediately with a small time window. We have several machines in a control room that are identical to the machines on the floor that we use for these pushes. We occasionally have a need to execute a program on the remote machines, and we currently use batch and PSexec to handle this task. We would love to be able to respond to these last minute pushes with "sorry, your own fault", but it won't happen. The BT method has allowed us to have a much faster response time, but the whole batch process can get messy when there are multiple jobs being pushed. We use Enterprise Ghost for other processes, and it doesn't work well in this large of scale, plus it is really quite expensive for a once-a-year task like this. EDIT: There is a hard requirement that the remote machines on the floor are running Windows. The control machines do not have a hard OS requirement. I would really like to stay away from Multicast because of complications with upstream routers. Is Multicast or BitTorrent the better way to go on this? Is there another protocol that might work better?

  Read the article

• Slow WLAN file transfer between server and tablet

  - by user266985

  My file server is running Ubuntu 12.04 and I'm sharing files from it over samba. It is connected via gigabit ethernet. My desktop, running Windows 8.1, is also connected via gigabit ethernet. I can transfer files between the two and completely saturate that gigabit pipe. However, I just got a Surface Pro 2, and I'm trying to stream HD movies from my server to the device over WiFi. For some reason, I can't break much past 1.5MB/s transferring files over the network. I've tried streaming through XBMC and a standard file copy; no difference. To add the confusion, if I connect to my guest network and then use my VPN server (installed on the router) to access the file server, I get around 3.2MB/s. I've been running diagnostics to determine the root and I think I've found it but I have no idea what is causing it or how to fix it. Router: Asus RT-N66U Surface Pro 2 Network Card: Marvell Avastar 350N (Driver 19/09/2013 v14.69.24044.150) InSSIDer: Link Score: 100 Co-Channels: 0 Overlapping: 0 5GHz Network Channel: 48+44 iperf File Server as Server; Surface Pro 2 as Client - TCP Performance: Acceptable ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 85.3 KByte (default) ------------------------------------------------------------ [ 4] local 192.168.0.90 port 5001 connected with 192.168.0.56 port 57367 [ ID] Interval Transfer Bandwidth [ 4] 0.0- 1.0 sec 10.1 MBytes 84.7 Mbits/sec [ 4] 1.0- 2.0 sec 10.4 MBytes 87.6 Mbits/sec [ 4] 2.0- 3.0 sec 10.6 MBytes 88.8 Mbits/sec [ 4] 3.0- 4.0 sec 10.7 MBytes 89.5 Mbits/sec [ 4] 4.0- 5.0 sec 10.1 MBytes 84.4 Mbits/sec [ 4] 5.0- 6.0 sec 10.2 MBytes 85.8 Mbits/sec [ 4] 6.0- 7.0 sec 7.04 MBytes 59.1 Mbits/sec [ 4] 7.0- 8.0 sec 10.8 MBytes 90.2 Mbits/sec [ 4] 8.0- 9.0 sec 10.6 MBytes 89.1 Mbits/sec [ 4] 9.0-10.0 sec 8.62 MBytes 72.3 Mbits/sec [ 4] 0.0-10.0 sec 99.2 MBytes 83.1 Mbits/sec iperf Surface Pro 2 as Server, File Server as Client Performance: Poor ------------------------------------------------------------ Client connecting to 192.168.0.56, TCP port 5001 TCP window size: 22.9 KByte (default) ------------------------------------------------------------ [ 3] local 192.168.0.90 port 40233 connected with 192.168.0.56 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0- 1.0 sec 1.50 MBytes 12.6 Mbits/sec [ 3] 1.0- 2.0 sec 1.50 MBytes 12.6 Mbits/sec [ 3] 2.0- 3.0 sec 1.50 MBytes 12.6 Mbits/sec [ 3] 3.0- 4.0 sec 1.25 MBytes 10.5 Mbits/sec [ 3] 4.0- 5.0 sec 1.62 MBytes 13.6 Mbits/sec [ 3] 5.0- 6.0 sec 1.50 MBytes 12.6 Mbits/sec [ 3] 6.0- 7.0 sec 1.38 MBytes 11.5 Mbits/sec [ 3] 7.0- 8.0 sec 1.50 MBytes 12.6 Mbits/sec [ 3] 8.0- 9.0 sec 1.50 MBytes 12.6 Mbits/sec [ 3] 9.0-10.0 sec 1.62 MBytes 13.6 Mbits/sec [ 3] 0.0-10.1 sec 15.0 MBytes 12.4 Mbits/sec For some reason, it gets capped and I haven't got a clue why. Any suggestions? Edit: My link speed is reported as 270Mbps by Windows. I'm less than two metres from the router with a clear line of sight.

  Read the article

• How to stretch the image from one screen to two screens

  - by wxiiir

  I want to be able to stretch the image from one monitor to a second monitor even if i have to use some software to do it. For example i want the top half of the image that is now shown on my first monitor to occupy the whole second monitor and i want the bottom half to occupy the whole first monitor, or the other way around i don't really care as long as it works. I would be cool to know how to do the same stuff but to the left half and right half. I know that image pixels would have twice the lenght or height this way but i don't really care about it as long as it works so basically i want the stuff to show on both monitors but with the same pixels as before. I have a hd4870 and windows7 and hd4000 family doesnt support having two monitors behaving like a large one, only hd5000 upwards, this would solve my problems without any of the drawbacks but it just can't be done (or maybe it can via software but i'm just too tired of searching). A solution to make almost any graphic card have two monitors behaving like a large one is matrox dualhead2go but that's just as expensive as a good hd5000 card so it's not worth it. thanks in advance EDIT I guess that nobody so far was able to fully comprehend my problem that was very explicitly written but i will elaborate some more. My hd4870 can have 2 monitors working with it but some stuff like games won't run on both monitors, which sucks. There are some ways to circumvent this problem and two of them are perfect or almost perfect but expensive and the third would be a software solution that would make it possible. The first one is to have and hd5000 family video card which will work just fine with both monitors. The second is to have a matrox dualhead2go that will make my hd4870 detect my two monitors as a large monitor. The third is to have a software that makes my two displays be detected as a large display and then captures the output of the video card, splits the images and renders them as 2d images to both monitors OR a simpler one but that would make outputted pixels double the width or height would be to capture the output of the graphics card to one screen, split it in two and enlarge it to fit both monitors and then output it to the monitors. p.s. By capturing the output of the video card i mean just make the video card process the stuff in a certain way. Making the video card detect two monitors as a large one via software may be a bit impossible or impracticable but stretching the output as a 2d image from one to both monitors for some coders should be a walk in the park so it would be likely that such program would exist or that some widespread softwares for dual monitor would have such function in them.

  Read the article

• My USB bootable thumb drive, no longer boots on a single particular computer on which it previously worked

  - by LiamMeron

  I created a bootable drive, booting CrunchBang, about 2 months ago. About a month ago, I booted into it on another laptop. After shutting down, I have been unable to get it to boot on my own laptop, despite having worked previously. I can still boot into it on my desktop, and can also boot into it on all other computers that I have tried. If I plug it in when I am running Ubuntu, the Home and / folders mount, the only error being that for some reason my PC likes to try and mount the swap partition too, which naturally, gives an error. The BIOS settings are all still setup to boot from USB. When I boot, all I get is a black screen with the white cursor, it will stay there for as long as I leave it. If it is worth anything, I have GRUB loader installed on the drive. The partitions look a little odd, but I am rather unfamiliar with how they are dealt with. The first partition, /, is sdb1 and has the bootable flag. The second partition is an extended system, and is sdb2. The third partition, according to GParted, seems to be nested under the second. This is the swap partition, and it is sdb5 The fourth partition is my home partition and is sdb6 and is also nested under the extended system. The first and fourth partitions are ext4. I don't know if that helps, but the more info, the better accuracy, generally. Thanks. EDIT: I tried reinstalling GRUB on the drive, but that didn't work. However, when I reinstalled GRUB on my laptop, I did it with my USB thumbdrive in. This caused the GRUB updater to find the /boot folder and add the proper details into my laptop's GRUB loader. I could log into CrunchBang from my laptop's GRUB but I was still unable to boot directly to the drive. It looked like my BIOS is unable to find the bootloader. I am unable to install GRUB to a partition I just created, a /boot partition at the start of the drive, GRUB just doesn't allow it. I think I'm going to have to reinstall #! on my drive, which won't be a great loss as I haven't put much time into it.

  Read the article

• Nginx SSL redirect for one specific page only

  - by jjiceman

  I read and followed this question in order to configure nginx to force SSL for one page (admin.php for XenForo), and it is working well for a few of the site administrators but is not for myself. I was wondering if anyone has any advice on how to improve this configuration: ... ssl_certificate example.net.crt; ssl_certificate_key example.key; server { listen 80 default; listen 443 ssl; server_name www.example.net example.net; access_log /srv/www/example.net/logs/access.log; error_log /srv/www/example.net/logs/error.log; root /srv/www/example.net/public_html; index index.php index.html; location / { if ( $scheme = https ){ rewrite ^ http://example.net$request_uri? permanent; } try_files $uri $uri/ /index.php?$uri&$args; index index.php index.html; } location ^~ /admin.php { if ( $scheme = http ) { rewrite ^ https://example.net$request_uri? permanent; } try_files $uri /index.php; include fastcgi_params; fastcgi_pass 127.0.0.1:9000; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_param HTTPS on; } location ~ \.php$ { try_files $uri /index.php; include fastcgi_params; fastcgi_pass 127.0.0.1:9000; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_param HTTPS off; } } ... It seems that the extra information in the location ^~ /admin.php block is unecessary, does anyone know of an easy way to avoid duplicate code? Without it it skips the php block and just returns the php files. Currently it applies https correctly in Firefox when I navigate to admin.php. In Chrome, it downloads the admin.php page. When returning to the non-https website in Firefox, it does not correctly return to http but stays as SSL. Like I said earlier, this only happens for me, the other admins can go back and forth without a problem. Is this an issue on my end that I can fix? And does anyone know of any ways I could reduce duplicate configuration options in the configuration? Thanks in advance! EDIT: Clearing the cache / cookies seemed to work. Is this the right way to do http/https redirection? I sort of made it up as I went along.

  Read the article

• OEM sound card with no drivers or support

  - by randy

  I thought my sound card was going out so I bought a sound card online. Everything seemed to work ok, I do have sound. But after a few months, I noticed the extra software that downloaded with the sound card drivers didn't work. I ended up contacting creative and after a month of e-mail support, they asked for the serial number and/or model number. Their reply back was I had purchased an OEM sound card and they could not provide support for that, and informed me that that is why their drivers and software didn't work. They informed me that I had to contact the company that distributed the sound card and install their software. Is there anything I can do to find out who distributed this sound card, or is there anything I can do to get other features to work? I have 4 speakers and a sub but only 2 speakers produce sound. The only control I have is the volume. Creative's driver update program will find my sound card, download updates and even added software, but if I try to click on a downloaded program like Creative's Toolbox or Media Center, I get an error that it cannot find the devise. That is why I contacted creative in the first place. EDIT Thanks for the responses everyone. Here's an update. I thought I'd go thru my old computer stuff for my classes at school. I have a lot of old stuff saved, boxes and cables and stuff. I found the box the sound card came in. It looks like a box you'd buy at the store, like Best Buy or CompUSA. I worked with creative for such a long time, it went past the point of being able to return it to the junk online store this shipped from. The box did have an install CD, so I thought I'd start over to reinstall the drivers and software that shipped with the card. I noticed that the install would uninstall a program, then reinstall it. so I thought things were working out. But no good. Everything still works but the programs were still bad. I'd get an error trying to load them - not found. I'll look on the card the next time I get a chance and see if I can spot any kind of name on it.

  Read the article

• Why is Linux choosing the wrong source ip address

  - by Scheintod

  and what to do to let it choose the right one? This all happens inside an OpenVZ container: The Host is Debian/Wheezy with Redhat/OpenVZ Kernel: root@mycl2:~# uname -a Linux mycl2 2.6.32-openvz-042stab081.5-amd64 #1 SMP Mon Sep 30 16:40:27 MSK 2013 x86_64 GNU/Linux The container has two (virtual) network interfaces. One in public and one in private address-space: root@mycl2:~# ifconfig lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) venet0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:127.0.0.2 P-t-P:127.0.0.2 Bcast:0.0.0.0 Mask:255.255.255.255 UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1 RX packets:475 errors:0 dropped:0 overruns:0 frame:0 TX packets:775 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:32059 (31.3 KiB) TX bytes:56309 (54.9 KiB) venet0:0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:80.123.123.29 P-t-P:80.123.123.29 Bcast:80.123.123.29 Mask:255.255.255.255 UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1 venet0:1 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.0.1.29 P-t-P:10.0.1.29 Bcast:10.0.1.29 Mask:255.255.255.255 UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1 The route to the private network is set manually: root@mycl2:~# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 venet0 0.0.0.0 0.0.0.0 0.0.0.0 U 0 0 0 venet0 Tring to ping others on the private network leads to the wrong source address been choosen: root@mycl2:~# ip route get 10.0.1.26 10.0.1.26 dev venet0 src 80.123.123.29 cache mtu 1500 advmss 1460 hoplimit 64 Why is this and what can I do about it? EDIT: If I create the route with (thanks to Joshua) ip route add 10.0.0.0/8 dev venet0 src 10.0.1.29 it is working. But according to man ip-route the src parameter should only set the source-ip if this route is chosen. But if this route is chosen then the source-ip would be that anyway.

  Read the article

• function to org-sort by three (3) criteria: due date / priority / title

  - by lawlist

  Is anyone aware of an org-sort function / modification that can refile / organize a group of TODO so that it sorts them by three (3) criteria: first sort by due date, second sort by priority, and third sort by by title of the task? EDIT: If anyone can please help me to modify this so that undated TODO are sorted last, that would be greatly appreciated -- at the present time, undated TODO are not being sorted: ;; multiple sort (defun org-sort-multi (&rest sort-types) "Multiple sorts on a certain level of an outline tree, or plain list items. SORT-TYPES is a list where each entry is either a character or a cons pair (BOOL . CHAR), where BOOL is whether or not to sort case-sensitively, and CHAR is one of the characters defined in `org-sort-entries-or-items'. Entries are applied in back to front order. Example: To sort first by TODO status, then by priority, then by date, then alphabetically (case-sensitive) use the following call: (org-sort-multi '(?d ?p ?t (t . ?a)))" (interactive) (dolist (x (nreverse sort-types)) (when (char-valid-p x) (setq x (cons nil x))) (condition-case nil (org-sort-entries (car x) (cdr x)) (error nil)))) ;; sort current level (defun lawlist-sort (&rest sort-types) "Sort the current org level. SORT-TYPES is a list where each entry is either a character or a cons pair (BOOL . CHAR), where BOOL is whether or not to sort case-sensitively, and CHAR is one of the characters defined in `org-sort-entries-or-items'. Entries are applied in back to front order. Defaults to \"?o ?p\" which is sorted by TODO status, then by priority" (interactive) (when (equal mode-name "Org") (let ((sort-types (or sort-types (if (or (org-entry-get nil "TODO") (org-entry-get nil "PRIORITY")) '(?d ?t ?p) ;; date, time, priority '((nil . ?a)))))) (save-excursion (outline-up-heading 1) (let ((start (point)) end) (while (and (not (bobp)) (not (eobp)) (<= (point) start)) (condition-case nil (outline-forward-same-level 1) (error (outline-up-heading 1)))) (unless (> (point) start) (goto-char (point-max))) (setq end (point)) (goto-char start) (apply 'org-sort-multi sort-types) (goto-char end) (when (eobp) (forward-line -1)) (when (looking-at "^\\s-*$") ;; (delete-line) ) (goto-char start) ;; (dotimes (x ) (org-cycle)) )))))

  Read the article

• Ubuntu + SSL ports + AVAST

  - by jurajvt

  I have an interesting problem with communication via standard SSL ports. Fresh installed Ubuntu 14.04 server + Postfix + Dovecot, SASL authentication provided by Dovecot, self-signed certificate generated trough the Dovecot script mkcert.sh. Redirected ports on ZyWALL USG 200. I can send and receive e-mails from outside with standard ports 25 and 110, but not over 587. I am connecting to my server from machine with Windows 8.1 + VMWare Player + Ubuntu 14.04 Desktop + ssh. On Windows host I have installed Avast! antivirus. When I am trying to telnet from virtual machine to server over 587, it refused connection. But when I turn on Avast! it let me in to message Connected to... Same with nmap. When Avast! is turned on it is show me all SSL ports. When I turned it off, only standard ports appeared. OpenSSL shows me CONNECTED(00000003). But outside virtual machine directly in Windows 8.1 using nmap with zenmap there are not opened SSL ports in both Avast! states. From other external linux machines are problems with touching SSL ports same - refused. I have turned on submission in master.cf and 587 port is correctly listening on 0.0.0.0 in process master.pid which belongs to Postfix. I can telnet, or nmap over port 587 to my domain directly from server. Other ports like 995, 993 are OK on localhost, too. It is true, that I can't send emails via 587 anyway (Avast! turned on/off), but I can see ports opened. It is possible, that I have simply bad certificate and Avast! has right one, so with turned it on I can see opened ports? EDIT: To be more clear, I can't see or using port 587 everywhere from outside (tried Thunderbird, telnet, openssl, nmap, putty, swaks; both from Linux or Windows machines) and that is my problem. It was only by chance that I saw opened ports when Avast! is turned on.

  Read the article

• Why configuring manual IP do not work for me in DHCP?

  - by user58859

  I have broadband connection in my laptop. It's getting the IP by protocol. configuration is : ip : 192.168.1.2 subnet : 255.255.255.0 gateway : 192.168.1.1 Now I am curious, In IPV4 properties when instead of choosing "Obtain an IP address automatically", I choose "Use the following IP address" and configure everything same, why it do not work? Do DHCP do not work when we configure the IP manually? (operating system : windows-7) EDIT : After configuring the ip manually, when I used ipconfig/all , it's showing dhcp enabled : NO. I am not doing it. Why it got disabled automatically? and how to enable it? DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.1.2(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 NetBIOS over Tcpip. . . . . . . . : Enabled

  Read the article

• Need help troubleshooting highly variable ping times

  - by Elliot.Bradshaw

  I'm at work using Citrix (think Remote Desktop) to connect to client sites. With my job I have to write a fair bit of code while I'm connected remotely via Citrix, so the latency of my internet connection is important. If I'm getting ping times above 250ms, then it becomes almost impossible to scroll, click or type with accuracy. Recently my Comcast business internet has been exhibiting highly variable ping times. If I ping google.com, I'll get pings that range from 9ms all the way up to 1300ms. The problem seems to be at its worst during the hours of 1PM to 4:30PM. Outside of those hours and the variance in pings settles down, mostly between 9ms and 50ms. The signal to noise ratio and upstream power are both fine on my modem--the values are here: http://pastebin.com/D4hWGPXf I ran a trace route from my computer to google.com (the results of which are here: http://pastebin.com/GcdjYvMh) and did another test ping to the IP of the first hop outside of our local network (73.98.44.1)--the variance in ping times existed in exactly the same manner as if I were pinging Google. Connecting directly to the cable modem by CAT5 makes no difference. Here is a screenshot demonstrating the variance of the ping times: http://postimage.org/image/haocdeauv/full/ -- as you can see it can get pretty bad. Three Comcast techs have been out (two of them were here when the problem wasn't happening) and they as well as the regional tier 2 Comcast support were unable to diagnose the problem. I now have a ticket open with tier 3 support, but have yet to hear back from them. Does anyone know what could cause these sorts of problems or have any idea from the traceroute above where it could be originating? The regional tier 2 guy tried to tell me that what I'm seeing is normal--are highly variable ping times like that ever acceptable? Anything I should ask Comcast to do or look at to get this problem fixed? Any tips/advice much appreciated! Edit: This is Comcast cable internet at a small start-up, we've ruled out congestion in our private LAN as a cause (i.e., no one's watching YouTube when the pings become variable). Update: Tier 3 Comcast support advised swapping out the modem, a tech came here today and did that--same problem persists.

  Read the article

• FTP script needs blank line

  - by Ones and Zeroes

  I am trying to determine the reason for some FTP servers requiring a blank line in the script as follows: open server.com username ftp_commands bye Refer to blank line required after username credentials. Example from: FTP from batch file another reference to the same: http://newsgroups.derkeiler.com/Archive/Comp/comp.sys.ibm.as400.misc/2008-05/msg00227.html Also discussed here: archive.midrange.com/midrange-l/200601/msg00048.html "The behavior I'm observing is the same as if I didn't specify the password to login." with an answer referring to our same fix... archive.midrange.com/midrange-l/200601/msg00053.html and archive.midrange.com/midrange-l/200601/msg00065.html Note: It is my experience that FTP questions attract uncouth responses. Admittedly FTP is outdated, but many clients still have legacy systems, which they cannot upgrade or replace. The reason thereof should not be discussed here. The intention of this question is to invite a positive response. Please do not respond if you disagree with the above. If you have never encountered this same issue, please do not respond. I suspect this may be limited to FTP scripts executed from Windows machines, but have been told that this happens often and with many different servers. My specific interest is to understand what may cause this as I have a real world example of a production system suddenly requiring this as a workaround fix, after running for many years without issue. The server belongs to a third party who claims no change on their end. Server details unknown and cannot be determined. Any help or encouragement from someone who has come across the same, would be appreciated. ps. Sorry for the many words and references to painful responses, but I have asked similar questions on serverfault and elsewhere and unfortunately got back kneejerk responses to FTP and respondents debating the validity of the question. I would truly not ask, or re-post this question online if I had a better understanding of the issue. I know of people who have seen this issue, but don't know what causes it. I am wary that this question would again turn into another irrelevant discussion. Please, I ask very nicely: Please do not respond if you have not encountered a similar issue. FURTHER EDIT: Please do not suggest changing the product. The problem is not the blank line requirement. We know this fixes the issue. The problem is not being able to explain the reason for the blank line in the first place. Slight difference, but a critical point to note wrt the answering of this question.

  Read the article

< Previous Page | 668 669 670 671 672 673 674 675 676 677 678 679  | Next Page >