Search Results

Search found 7595 results on 304 pages for 'dev jadeja'.

Page 68/304 | < Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >

• Ubuntu 10.04 recognizing USB 2.0 external HD as USB 1.1

  - by btucker

  When I connect the USB 2.0 drive I see this: usb 1-4.3: new full speed USB device using ohci_hcd and address 5 so I know it's getting seen as USB 1.1. usb-devices shows that it really is USB 2.0 and connected to a USB 2.0 hub: T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 2 Spd=12 MxCh= 4 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=05e3 ProdID=0608 Rev=77.61 S: Product=USB2.0 Hub C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=13fd ProdID=1340 Rev=02.10 S: Manufacturer=Generic S: Product=External C: #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=2mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage It seems the problem is that root hub is: T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh=10 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0001 Rev=02.06 S: Manufacturer=Linux 2.6.32-25-server ohci_hcd S: Product=OHCI Host Controller S: SerialNumber=0000:00:02.0 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub And there's no mention of ehci_hcd. lsusb -t gives me: /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ohci_hcd/10p, 12M |__ Port 4: Dev 2, If 0, Class=hub, Driver=hub/4p, 12M |__ Port 2: Dev 4, If 0, Class=stor., Driver=usb-storage, 12M |__ Port 3: Dev 5, If 0, Class=stor., Driver=usb-storage, 12M |__ Port 6: Dev 3, If 0, Class=stor., Driver=usb-storage, 12M It seems like I'm missing something which would allow the OS to see USB 2.0 devices. Can anyone point me in the right direction? EDIT Full lsusb -v output: Bus 001 Device 005: ID 13fd:1340 Initio Corporation Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x13fd Initio Corporation idProduct 0x1340 bcdDevice 2.10 iManufacturer 1 Generic iProduct 2 External iSerial 3 57442D574341595930323337 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 2mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x05e3 Genesys Logic, Inc. idProduct 0x0608 USB-2.0 4-Port HUB bcdDevice 77.61 iManufacturer 0 iProduct 1 USB2.0 Hub iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 4 wHubCharacteristic 0x00e0 Ganged power switching Ganged overcurrent protection Port indicators bPwrOn2PwrGood 50 * 2 milli seconds bHubContrCurrent 100 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0103 power enable connect Port 3: 0000.0103 power enable connect Port 4: 0000.0100 power Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 1 Single TT bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 2.06 iManufacturer 3 Linux 2.6.32-25-server ohci_hcd iProduct 2 OHCI Host Controller iSerial 1 0000:00:02.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 11 bDescriptorType 41 nNbrPorts 10 wHubCharacteristic 0x0002 No power switching (usb 1.0) Ganged overcurrent protection bPwrOn2PwrGood 1 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 0x00 PortPwrCtrlMask 0xff 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0103 power enable connect Port 5: 0000.0100 power Port 6: 0000.0103 power enable connect Port 7: 0000.0100 power Port 8: 0000.0100 power Port 9: 0000.0100 power Port 10: 0000.0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled

  Read the article

• Missing whole disk device in OpenSolaris

  - by Jeff Mc

  I have begun experimenting with Solaris and ZFS as a NAS. All was going very smoothly until I had a drive failure. When I replaced the drive, I no longer have a device file mapped to the whole disk. /dev/dsk/c7t3d0 does not exist but c7t2d0 and c7t4d0 both do. Also the sd@3,0:wd file under the /devices/ tree is non-existent. Do I have to prepare/partition the disk somehow to cause the whole disk device to exist? Here are a few outputs that might be useful. jeffmc@ats-ds2:/dev/dsk$ zpool status pool: datapool state: DEGRADED status: One or more devices could not be opened. Sufficient replicas exist for the pool to continue functioning in a degraded state. action: Attach the missing device and online it using 'zpool online'. see: http://www.sun.com/msg/ZFS-8000-2Q scrub: none requested config: NAME STATE READ WRITE CKSUM datapool DEGRADED 0 0 0 mirror-0 DEGRADED 0 0 0 c7t2d0 ONLINE 0 0 0 c7t3d0 UNAVAIL 0 0 0 cannot open mirror-1 ONLINE 0 0 0 c7t4d0 ONLINE 0 0 0 c7t5d0 ONLINE 0 0 0 jeffmc@ats-ds2:/dev/dsk$ zpool replace datapool c7t3d0 cannot open 'c7t3d0': no such device in /dev/dsk must be a full path or shorthand device name jeffmc@ats-ds2:/dev/dsk$ sudo format Searching for disks...done AVAILABLE DISK SELECTIONS: 0. c7t0d0 /pci@0,0/pci8086,3599@6/pci8086,330@0/pci1014,2cc@7,1/sd@0,0 1. c7t1d0 /pci@0,0/pci8086,3599@6/pci8086,330@0/pci1014,2cc@7,1/sd@1,0 2. c7t2d0 /pci@0,0/pci8086,3599@6/pci8086,330@0/pci1014,2cc@7,1/sd@2,0 3. c7t3d0 /pci@0,0/pci8086,3599@6/pci8086,330@0/pci1014,2cc@7,1/sd@3,0 4. c7t4d0 /pci@0,0/pci8086,3599@6/pci8086,330@0/pci1014,2cc@7,1/sd@4,0 5. c7t5d0 /pci@0,0/pci8086,3599@6/pci8086,330@0/pci1014,2cc@7,1/sd@5,0

  Read the article

• Unusually high dentry cache usage

  - by Wolfgang Stengel

  Problem A CentOS machine with kernel 2.6.32 and 128 GB physical RAM ran into trouble a few days ago. The responsible system administrator tells me that the PHP-FPM application was not responding to requests in a timely manner anymore due to swapping, and having seen in free that almost no memory was left, he chose to reboot the machine. I know that free memory can be a confusing concept on Linux and a reboot perhaps was the wrong thing to do. However, the mentioned administrator blames the PHP application (which I am responsible for) and refuses to investigate further. What I could find out on my own is this: Before the restart, the free memory (incl. buffers and cache) was only a couple of hundred MB. Before the restart, /proc/meminfo reported a Slab memory usage of around 90 GB (yes, GB). After the restart, the free memory was 119 GB, going down to around 100 GB within an hour, as the PHP-FPM workers (about 600 of them) were coming back to life, each of them showing between 30 and 40 MB in the RES column in top (which has been this way for months and is perfectly reasonable given the nature of the PHP application). There is nothing else in the process list that consumes an unusual or noteworthy amount of RAM. After the restart, Slab memory was around 300 MB If have been monitoring the system ever since, and most notably the Slab memory is increasing in a straight line with a rate of about 5 GB per day. Free memory as reported by free and /proc/meminfo decreases at the same rate. Slab is currently at 46 GB. According to slabtop most of it is used for dentry entries: Free memory: free -m total used free shared buffers cached Mem: 129048 76435 52612 0 144 7675 -/+ buffers/cache: 68615 60432 Swap: 8191 0 8191 Meminfo: cat /proc/meminfo MemTotal: 132145324 kB MemFree: 53620068 kB Buffers: 147760 kB Cached: 8239072 kB SwapCached: 0 kB Active: 20300940 kB Inactive: 6512716 kB Active(anon): 18408460 kB Inactive(anon): 24736 kB Active(file): 1892480 kB Inactive(file): 6487980 kB Unevictable: 8608 kB Mlocked: 8608 kB SwapTotal: 8388600 kB SwapFree: 8388600 kB Dirty: 11416 kB Writeback: 0 kB AnonPages: 18436224 kB Mapped: 94536 kB Shmem: 6364 kB Slab: 46240380 kB SReclaimable: 44561644 kB SUnreclaim: 1678736 kB KernelStack: 9336 kB PageTables: 457516 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 72364108 kB Committed_AS: 22305444 kB VmallocTotal: 34359738367 kB VmallocUsed: 480164 kB VmallocChunk: 34290830848 kB HardwareCorrupted: 0 kB AnonHugePages: 12216320 kB HugePages_Total: 2048 HugePages_Free: 2048 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB DirectMap4k: 5604 kB DirectMap2M: 2078720 kB DirectMap1G: 132120576 kB Slabtop: slabtop --once Active / Total Objects (% used) : 225920064 / 226193412 (99.9%) Active / Total Slabs (% used) : 11556364 / 11556415 (100.0%) Active / Total Caches (% used) : 110 / 194 (56.7%) Active / Total Size (% used) : 43278793.73K / 43315465.42K (99.9%) Minimum / Average / Maximum Object : 0.02K / 0.19K / 4096.00K OBJS ACTIVE USE OBJ SIZE SLABS OBJ/SLAB CACHE SIZE NAME 221416340 221416039 3% 0.19K 11070817 20 44283268K dentry 1123443 1122739 99% 0.41K 124827 9 499308K fuse_request 1122320 1122180 99% 0.75K 224464 5 897856K fuse_inode 761539 754272 99% 0.20K 40081 19 160324K vm_area_struct 437858 223259 50% 0.10K 11834 37 47336K buffer_head 353353 347519 98% 0.05K 4589 77 18356K anon_vma_chain 325090 324190 99% 0.06K 5510 59 22040K size-64 146272 145422 99% 0.03K 1306 112 5224K size-32 137625 137614 99% 1.02K 45875 3 183500K nfs_inode_cache 128800 118407 91% 0.04K 1400 92 5600K anon_vma 59101 46853 79% 0.55K 8443 7 33772K radix_tree_node 52620 52009 98% 0.12K 1754 30 7016K size-128 19359 19253 99% 0.14K 717 27 2868K sysfs_dir_cache 10240 7746 75% 0.19K 512 20 2048K filp VFS cache pressure: cat /proc/sys/vm/vfs_cache_pressure 125 Swappiness: cat /proc/sys/vm/swappiness 0 I know that unused memory is wasted memory, so this should not necessarily be a bad thing (especially given that 44 GB are shown as SReclaimable). However, apparently the machine experienced problems nonetheless, and I'm afraid the same will happen again in a few days when Slab surpasses 90 GB. Questions I have these questions: Am I correct in thinking that the Slab memory is always physical RAM, and the number is already subtracted from the MemFree value? Is such a high number of dentry entries normal? The PHP application has access to around 1.5 M files, however most of them are archives and not being accessed at all for regular web traffic. What could be an explanation for the fact that the number of cached inodes is much lower than the number of cached dentries, should they not be related somehow? If the system runs into memory trouble, should the kernel not free some of the dentries automatically? What could be a reason that this does not happen? Is there any way to "look into" the dentry cache to see what all this memory is (i.e. what are the paths that are being cached)? Perhaps this points to some kind of memory leak, symlink loop, or indeed to something the PHP application is doing wrong. The PHP application code as well as all asset files are mounted via GlusterFS network file system, could that have something to do with it? Please keep in mind that I can not investigate as root, only as a regular user, and that the administrator refuses to help. He won't even run the typical echo 2 > /proc/sys/vm/drop_caches test to see if the Slab memory is indeed reclaimable. Any insights into what could be going on and how I can investigate any further would be greatly appreciated. Updates Some further diagnostic information: Mounts: cat /proc/self/mounts rootfs / rootfs rw 0 0 proc /proc proc rw,relatime 0 0 sysfs /sys sysfs rw,relatime 0 0 devtmpfs /dev devtmpfs rw,relatime,size=66063000k,nr_inodes=16515750,mode=755 0 0 devpts /dev/pts devpts rw,relatime,gid=5,mode=620,ptmxmode=000 0 0 tmpfs /dev/shm tmpfs rw,relatime 0 0 /dev/mapper/sysvg-lv_root / ext4 rw,relatime,barrier=1,data=ordered 0 0 /proc/bus/usb /proc/bus/usb usbfs rw,relatime 0 0 /dev/sda1 /boot ext4 rw,relatime,barrier=1,data=ordered 0 0 tmpfs /phptmp tmpfs rw,noatime,size=1048576k,nr_inodes=15728640,mode=777 0 0 tmpfs /wsdltmp tmpfs rw,noatime,size=1048576k,nr_inodes=15728640,mode=777 0 0 none /proc/sys/fs/binfmt_misc binfmt_misc rw,relatime 0 0 cgroup /cgroup/cpuset cgroup rw,relatime,cpuset 0 0 cgroup /cgroup/cpu cgroup rw,relatime,cpu 0 0 cgroup /cgroup/cpuacct cgroup rw,relatime,cpuacct 0 0 cgroup /cgroup/memory cgroup rw,relatime,memory 0 0 cgroup /cgroup/devices cgroup rw,relatime,devices 0 0 cgroup /cgroup/freezer cgroup rw,relatime,freezer 0 0 cgroup /cgroup/net_cls cgroup rw,relatime,net_cls 0 0 cgroup /cgroup/blkio cgroup rw,relatime,blkio 0 0 /etc/glusterfs/glusterfs-www.vol /var/www fuse.glusterfs rw,relatime,user_id=0,group_id=0,default_permissions,allow_other,max_read=131072 0 0 /etc/glusterfs/glusterfs-upload.vol /var/upload fuse.glusterfs rw,relatime,user_id=0,group_id=0,default_permissions,allow_other,max_read=131072 0 0 sunrpc /var/lib/nfs/rpc_pipefs rpc_pipefs rw,relatime 0 0 172.17.39.78:/www /data/www nfs rw,relatime,vers=3,rsize=65536,wsize=65536,namlen=255,hard,proto=tcp,port=38467,timeo=600,retrans=2,sec=sys,mountaddr=172.17.39.78,mountvers=3,mountport=38465,mountproto=tcp,local_lock=none,addr=172.17.39.78 0 0 Mount info: cat /proc/self/mountinfo 16 21 0:3 / /proc rw,relatime - proc proc rw 17 21 0:0 / /sys rw,relatime - sysfs sysfs rw 18 21 0:5 / /dev rw,relatime - devtmpfs devtmpfs rw,size=66063000k,nr_inodes=16515750,mode=755 19 18 0:11 / /dev/pts rw,relatime - devpts devpts rw,gid=5,mode=620,ptmxmode=000 20 18 0:16 / /dev/shm rw,relatime - tmpfs tmpfs rw 21 1 253:1 / / rw,relatime - ext4 /dev/mapper/sysvg-lv_root rw,barrier=1,data=ordered 22 16 0:15 / /proc/bus/usb rw,relatime - usbfs /proc/bus/usb rw 23 21 8:1 / /boot rw,relatime - ext4 /dev/sda1 rw,barrier=1,data=ordered 24 21 0:17 / /phptmp rw,noatime - tmpfs tmpfs rw,size=1048576k,nr_inodes=15728640,mode=777 25 21 0:18 / /wsdltmp rw,noatime - tmpfs tmpfs rw,size=1048576k,nr_inodes=15728640,mode=777 26 16 0:19 / /proc/sys/fs/binfmt_misc rw,relatime - binfmt_misc none rw 27 21 0:20 / /cgroup/cpuset rw,relatime - cgroup cgroup rw,cpuset 28 21 0:21 / /cgroup/cpu rw,relatime - cgroup cgroup rw,cpu 29 21 0:22 / /cgroup/cpuacct rw,relatime - cgroup cgroup rw,cpuacct 30 21 0:23 / /cgroup/memory rw,relatime - cgroup cgroup rw,memory 31 21 0:24 / /cgroup/devices rw,relatime - cgroup cgroup rw,devices 32 21 0:25 / /cgroup/freezer rw,relatime - cgroup cgroup rw,freezer 33 21 0:26 / /cgroup/net_cls rw,relatime - cgroup cgroup rw,net_cls 34 21 0:27 / /cgroup/blkio rw,relatime - cgroup cgroup rw,blkio 35 21 0:28 / /var/www rw,relatime - fuse.glusterfs /etc/glusterfs/glusterfs-www.vol rw,user_id=0,group_id=0,default_permissions,allow_other,max_read=131072 36 21 0:29 / /var/upload rw,relatime - fuse.glusterfs /etc/glusterfs/glusterfs-upload.vol rw,user_id=0,group_id=0,default_permissions,allow_other,max_read=131072 37 21 0:30 / /var/lib/nfs/rpc_pipefs rw,relatime - rpc_pipefs sunrpc rw 39 21 0:31 / /data/www rw,relatime - nfs 172.17.39.78:/www rw,vers=3,rsize=65536,wsize=65536,namlen=255,hard,proto=tcp,port=38467,timeo=600,retrans=2,sec=sys,mountaddr=172.17.39.78,mountvers=3,mountport=38465,mountproto=tcp,local_lock=none,addr=172.17.39.78 GlusterFS config: cat /etc/glusterfs/glusterfs-www.vol volume remote1 type protocol/client option transport-type tcp option remote-host 172.17.39.71 option ping-timeout 10 option transport.socket.nodelay on # undocumented option for speed # http://gluster.org/pipermail/gluster-users/2009-September/003158.html option remote-subvolume /data/www end-volume volume remote2 type protocol/client option transport-type tcp option remote-host 172.17.39.72 option ping-timeout 10 option transport.socket.nodelay on # undocumented option for speed # http://gluster.org/pipermail/gluster-users/2009-September/003158.html option remote-subvolume /data/www end-volume volume remote3 type protocol/client option transport-type tcp option remote-host 172.17.39.73 option ping-timeout 10 option transport.socket.nodelay on # undocumented option for speed # http://gluster.org/pipermail/gluster-users/2009-September/003158.html option remote-subvolume /data/www end-volume volume remote4 type protocol/client option transport-type tcp option remote-host 172.17.39.74 option ping-timeout 10 option transport.socket.nodelay on # undocumented option for speed # http://gluster.org/pipermail/gluster-users/2009-September/003158.html option remote-subvolume /data/www end-volume volume replicate1 type cluster/replicate option lookup-unhashed off # off will reduce cpu usage, and network option local-volume-name 'hostname' subvolumes remote1 remote2 end-volume volume replicate2 type cluster/replicate option lookup-unhashed off # off will reduce cpu usage, and network option local-volume-name 'hostname' subvolumes remote3 remote4 end-volume volume distribute type cluster/distribute subvolumes replicate1 replicate2 end-volume volume iocache type performance/io-cache option cache-size 8192MB # default is 32MB subvolumes distribute end-volume volume writeback type performance/write-behind option cache-size 1024MB option window-size 1MB subvolumes iocache end-volume ### Add io-threads for parallel requisitions volume iothreads type performance/io-threads option thread-count 64 # default is 16 subvolumes writeback end-volume volume ra type performance/read-ahead option page-size 2MB option page-count 16 option force-atime-update no subvolumes iothreads end-volume

  Read the article

• [Ubuntu]df Total size is not correct compared with the size of the disk

  - by John John

  I'm running Ubuntu Squeeze and on one of the partitions df is showing the Total size as 335G: Filesystem Size Used Avail Use% Mounted on /dev/sdb 335G 225G 94G 71% /mnt However in the past it was showing as 360GB (which is the actual size): fdisk -l /dev/sdb Disk /dev/sdb: 365.0 GB, 365041287168 bytes lsof +L1 does not return anything (and anyway if this would be the case the Total space should not be affected.) On this partition I'm writing (and deleting) a lot of files and this happened before in the past, but problem solved by itself.

  Read the article

• Harddisk formatting with dd return error

  - by Usman Ajmal

  Hi, I tried to format my harddisk (160 GB) with the following command dd if=/dev/zero of=/dev/sda After some 3 hours, following error came up: dd: writing to '/dev/sda' : No space left on device 312581809+0 records in 312581808+0 records out 160041885696 bytes (160 GB) copied, 10708.3 s, 14.9 MB/s Any idea what went wrong?

  Read the article

• Linux Software RAID1 Rebuild Completes, but after reboot, its degraded again

  - by zimmy6996

  I have been beating my head with an issue here, and I'm now turning to the internet for help. I have a system running Mandrake Linux, with the following configuration: /dev/hda - This is a IDE drive. Has some partitions on it that boot the system and make up most of the file system. /dev/sda - This is drive 1 of 2 for a software raid /dev/md0 /dev/sdb - This is drive 2 of 2 for a software raid /dev/md0 md0 gets mounted but fstab as /data-storage, so it is not critical to the systems ability to boot. We can comment it out of fstab, and the system works just fine either way. The problem is, we have a failed sdb drive. So I shut the box down, and have pulled the failed disk and installed a new disk. When the system boots up, /proc/mdstat shows only sda as part of the raid. I then run the various command to rebuild the RAID to /dev/sdb. Everything rebuilds correctly, and upon completion, you look at /proc/mdstat and it shows 2 drives sda1(0) and sdb1(1). Everything looks great. Then you reboot the box ... UGH!!! Once rebooted, sdb is missing again from the RAID. It is like the rebuild never happened. I can walk through the commands to rebuild it again, and it will work, but again, after reboot, the box seems to make sdb just vanish! The real odd thing is, if after reboot, I pull sda out of the box, and try to get the system to load with the rebuilt sdb drive in the system, and when I do, the system actually throws and error just after grub, and says something about drive error, and the system has to shut down. Thoughts??? I'm starting to wonder if grub has something to do with this mess. That the drive isn't being setup within grub to be visible at boot? This RAID array isn't necessary for the system to boot, but when the replacement drive is in there, without SDA it won't boot system, so it makes me believe there is something to that. On top of that, there just seems to be something wonky here the drive falling off of RAID after reboot. I've hit the point of pounding my head on the keyboard. Any help would be greatly appreciated!!!

  Read the article

• Instructions to setup domain controller

  - by Robert Koritnik

  Where could I get best step by step instructions (with some simple explanations) how to setup domain controller on Windows Server 2008 R2 Server Core? I don't know what do I need? Do I need DNS as well and AD and so on and so forth. I don't know enough about these things, but I need to set them up to prepare development environment. I would also like to know how to configure firewall on DC machine, to make it visible on other machines because I've setup DC somehow but I can't connect to it... This is my HW config: Linksys internet router with DHCP my dev machine is Windows 7 my DC machine is a VM in my dev machine my dev machine has a network adapter to linksys and a virtual adapter to DC DC machine has two network adapters: one to linksys (to be inetrnet connected) and one to host (my dev Win7 machine)

  Read the article

• Automatically distinguish difference between multiple HDDs in linux?

  - by Jakobud

  I'm running Ubuntu Server 9.10. I have two external USB HDDs. I use them each for different backup reasons. So certain data gets stored on one HDD, and different information gets stored on the other HDD. I want to make a script that can look at the external HDD can determine which HDD it is, so that it can copy the proper information to it. Is there a way for Linux to determine this? Like if I see one HDD as /dev/sdc1, then unplug it and plug in the other HDD, should Linux see it as /dev/sdd1 or will it be /dev/sdc1? I'm a bit of a Linux newb and I don't quite understand how it determines the /dev/sdxx values that it assigns to drives.

  Read the article

• Any way to recover ext4 filesystems from a deleted LVM logical volume?

  - by Vegar Nilsen

  The other day I had a proper brain fart moment while expanding a disk on a Linux guest under Vmware. I stretched the Vmware disk file to the desired size and then I did what I usually do on Linux guests without LVM: I deleted the LVM partition and recreated it, starting in the same spot as the old one, but extended to the new size of the disk. (Which will be followed by fsck and resize2fs.) And then I realized that LVM doesn't behave the same way as ext2/3/4 on raw partitions... After restoring the Linux guest from the most recent backup (taken only five hours earlier, luckily) I'm now curious on how I could have recovered from the following scenario. It's after all virtually guaranteed that I'll be a dumb ass in the future as well. Virtual Linux guest with one disk, partitioned into one /boot (primary) partition (/dev/sda1) of 256MB, and the rest in a logical, extended partition (/dev/sda5). /dev/sda5 is then setup as a physical volume with pvcreate, and one volume group (vgroup00) created on top of it with the usual vgcreate command. vgroup00 is then split into two logical volumes root and swap, which are used for / and swap, logically. / is an ext4 file system. Since I had backups of the broken guest I was able to recreate the volume group with vgcfgrestore from the backup LVM setup found under /etc/lvm/backup, with the same UUID for the physical volume and all that. After running this I had two logical volumes with the same size as earlier, with 4GB free space where I had stretched the disk. However, when I tried to run "fsck /dev/mapper/vgroup00-root" it complained about a broken superblock. I tried to locate backup superblocks by running "mke2fs -n /dev/mapper/vgroup00-root" but none of those worked either. Then I tried to run TestDisk but when I asked it to find superblocks it only gave an error about not being able to open the file system due to a broken file system. So, with the default allocation policy for LVM2 in Ubuntu Server 10.04 64-bit, is it possible that the logical volumes are allocated from the end of the volume group? That would definitely explain why the restored logical volumes didn't contain the expected data. Could I have recovered by recreating /dev/sda5 with exactly the same size and disk position as earlier? Are there any other tools I could have used to find and recover the file system? (And clearly, the question is not whether or not I should have done this in a different way from the start, I know that. This is a question about what to do when shit has already hit the fan.)

  Read the article

• Server 2008 unresponsive after SP2 install.

  - by Dan

  I have a dev server that has an exact image of a production web server. The prod server only has SP1 installed on it. When I first fired up the dev box, the first thing I did was install SP2, and let it be. Almost every morning when I came in, the server was unusable. It would respond to ping, but RDP and the web site running on it were down. On the screen the screen saver was bouncing around, so it wasn't hard locked. But it was unresponsive to keyboard and mouse. So now I have to hard shut it down, but when it comes back up, the only thing in the event viewer is the unexpected shutdown, nothing else. I've since taken a fresh image of my prod box and put it on the dev server, and not installed SP2, and the dev box is humming along perfectly. I should also note that this is Server2k8 Web, 64bit Has anyone else seen anything like this?

  Read the article

• Connecting to a computer using Remote Desktop does not work first time

  - by dev

  Hi all, I'm having a weird sort of problem with Remote desktop and that too, only on one machine. If I boot up this machine, and then try to Remote desktop into it, it does not work.( I get the following error: The client could not connect to the remote computer. Remote connections might not be enabled or the computer might be too busy to accept new connections. It is also possible that network problems are preventing your connection. Please try connecting again later. If the problem continues to occur, contact your administrator. ) But if I physically log into it & then log out, and then try to Remote desktop into it, it works flawlessly. The problematic machine is Xp 64 Bit, but other systems with Xp 64 Bit work fine. Any Ideas on how to solve this?

  Read the article

• Can't mount home after trying to resize (bad geometry: block count exceeds size of device).

  - by Lynn

  This is on a fresh computer (super computer actually). It got to me with 15T on the home mount and 50G on the root. I tried allocating 7T to root and resizing (since I'm putting a local yum repo on this machine as it has no internet access nor will it ever). I tried following the instructions here: Centos 6.3 disk space allocation but something went wrong and the home won't mount again. Instead I get from dmesg | tail: EXT4-fs (dm-2): bad geometry: block count 4294967295 exceeds size of device (1342177280 blocks) df -h nets this output: Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup-lv_root 7.0T 3.6G 6.6T 1% / tmpfs 190G 216K 190G 1% /dev/shm /dev/sda1 485M 38M 422M 9% /boot I didn't have any files on /dev/mapper/VolGroup-lv_home. Will simply running mke2fs fix it to be mountable? What sort of options should I run it with. I've never resized volumes before or used mke2fs. I don't want to make this mess worse.

  Read the article

• netkit: why cant my router 4 pc4 ping my router 1 pc1 - how can I solve this please?

  - by donok

  Below I have four routers connected but my pc1 on r1 cannot ping my pc4 on r4 and also my pc2 on r2 cant ping my pc4 on r4 and vice versa. Below is a network diagram: and the configurations are below that, could anyone help me please on making them accessible? ![connecting 4 routers][1] I cant post my diagram on serverfault(less than 10 rep) so I did on stackoverflow and asked the same question. pc1: ifconfig eth0 195.11.14.5 netmask 255.255.255.0 broadcast 195.11.14.255 up route add default gw 195.11.14.1 dev eth0 pc2.start: ifconfig eth0 200.1.1.7 netmask 255.255.255.0 broadcast 200.1.1.255 up route add default gw 200.1.1.1 dev eth0 pc3: ifconfig eth0 195.20.14.9 netmask 255.255.255.0 broadcast 195.20.1.255 up route add default gw 195.20.14.1 dev eth0 pc4: ifconfig eth0 200.2.1.11 netmask 255.255.255.0 broadcast 200.2.1.255 up route add default gw 200.2.1.1 dev eth0 r1: ifconfig eth0 195.11.14.1 netmask 255.255.255.0 broadcast 195.11.14.255 up ifconfig eth1 100.0.0.9 netmask 255.255.255.252 broadcast 100.0.0.11 up route add -net 200.1.1.0 netmask 255.255.255.0 gw 100.0.0.10 dev eth1 route add default gw 100.0.0.10 lab.conf: if you need more on that Ill post it up but I think most of the info is there. Any help would be greatly appreciated especially trying to make a connection between pc4 and pc1, even if you think it does not make sense please explain why. Thank you.

  Read the article

• how to resolve all externally unresolved DNS queries ?

  - by red eyes dev

  I am using PowerDns on a Linux box (Debian 6). I would like to set up the powerdns server to resolve all externally unresolved DNS queries to a given, internal host. Is this possible? How is it done? I think it's necessary to use pdns-recursor, but my configuration file doesn't works ! I use mysql for backend. I add manually google.com and it's works, but if I delete entry I have "server failed", root dns (or isp dns) don't answer me.

  Read the article

• NTFS write speed really slow (<15MB/s)

  - by Zulakis

  I got a new Seagate 4TB harddrive formatted with ntfs using parted /dev/sda > mklabel gpt > mkpart pri 1 -1 mkfs.ntfs /dev/sda1 When copying files or testing writespeed with dd, the max writespeed I can get is about 12MB/s. The harddrive should be capable of atleast 100MB/s. top shows high cpu usage for the mount.ntfs process. The system has a AMD dualcore. This is the output of parted /dev/sda unit s print: Model: ATA ST4000DM000-1F21 (scsi) Disk /dev/sda: 7814037168s Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name Flags 1 2048s 7814035455s 7814033408s pri The used kernel is 3.5.0-23-generic. The ntfs-3g versions I tried are ntfs-3g 2012.1.15AR.1 (ubuntu 12.04 default) and the newest version ntfs-3g 2013.1.13AR.2. When formatted with ext4 I get good write speeds with about 140MB/s. How can I fix the writespeed?

  Read the article

• Adobe Illustrator - Objects are Expanded on Restart

  - by Shatou Dev

  I use Adobe Illustrator extensively for mobile development. For example, for Android app, I have many illustrations with different densities and sizes. I use many effects such as outer glow, round corners and such. However, sometimes, when I close the .ai file and re-open it later, I found all my objects expanded. Effects are expanded. For example, the round corner effect is now expanded and I cannot re-size any object. I am using a MacBook Pro. I am suspecting both Time Machine and Dropbox. As much as I can recall, it also appears with CS6 version, not CS5.

  Read the article

• fstab mount after network initialization

  - by Philip

  I'm automatically mounting a NFS with fstab. Sometimes the mount fails because the hostname of the NFS mount cannot be resolved (getaddrinfo failed). I'm assuming that this happens because the network initialization is slower than the mounts. Is there any way to initialize the network before mounting any devices? I'm already using _netdev as a mount option but this does not help. This is my current fstab file: # <file system> <mount point> <type> <options> <dump> <pass> /dev/md2 / ext3 errors=remount-ro 0 1 /dev/md1 /boot ext3 errors=remount-ro 0 1 /dev/sda3 swap swap defaults 0 0 /dev/sdb3 swap swap defaults 0 0 connect.mygluster.net:/data /var/gluster/data glusterfs ro,_netdev 0

  Read the article

• Missing hvc0 in Ubuntu Lucid Xen DomU

  - by Joril

  I've just installed an Ubuntu Lucid 64bit image (from Stacklet) as a Xen DomU, running under Xen 3.2.1 on Centos 5.2 64bit. Everything is working fine, except my logs are flooded with: /dev/hvc0: No such file or directory I tried creating the device with mknod /dev/hvc0 c 229 0 but the message just changes to: /dev/hvc0: cannot open as standard input: No such device or address Any hint on what I could try? :(

  Read the article

• SAS disk performance drops a while after reboot.

  - by Flamewires

  So we have some workstations with identical hardware. The Fedora14 box has a couple weeks uptime and still get good performance. hdparm -tT /dev/sda /dev/sda: Timing cached reads: 21766 MB in 2.00 seconds = 10902.12 MB/sec Timing buffered disk reads: 586 MB in 3.00 seconds = 195.20 MB/sec The Cent 5.5 boxes however seem to be okay after a reboot, /dev/sda: Timing cached reads: 34636 MB in 2.00 seconds = 17354.64 MB/sec Timing buffered disk reads: 498 MB in 3.01 seconds = 165.62 MB/sec but some time later( unsure exactly, tested at approx 1 day uptime) /dev/sda: Timing cached reads: 2132 MB in 2.00 seconds = 1064.96 MB/sec Timing buffered disk reads: 160 MB in 3.01 seconds = 53.16 MB/sec drop to this. This is with very low load. I believe they all have the same bios settings. Any ideas what could cause this on Cent? Ask for more info. It might also be worth noting, that passing the --direct flag causes the slow boxes to perform similarly to the non-slow ones for buffered disk reads.

  Read the article

• Mac OS X missing disk

  - by leo

  In boot camp, it only see partition size to be 149G while disk utility shows only one partition with size 320G. Why diskutil and df gives me different sizes? Also how can i fix it? thanks df -h Filesystem Size Used Avail Capacity Mounted on /dev/disk0s2 **149Gi 20Gi 129Gi 14% /** devfs 110Ki 110Ki 0Bi 100% /dev map -hosts 0Bi 0Bi 0Bi 100% /net map auto_home 0Bi 0Bi 0Bi 100% /home and diskutil list /dev/disk0 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme ***320.1 GB disk0** 1: EFI 209.7 MB disk0s1 2: Apple_HFS Mac HD 319.6 GB disk0s2

  Read the article

• CentOS 6.5 new Kernel not active after reboot

  - by Kristofer

  Today I was running some yum updates and wanted to verify that everything went through fine by making sure I had a new kernel. To my surprise I noticed that CentOS was still running 2.6.32-431.5.1.el6.x86_64 even though it looked as though 2.6.32-431.23.3.el6 was installed. Indeed 2.6.32-431.23.3.el6 shows up in /etc/grub.conf but not in the upstart boot options. Any ideas why? In the update log it says: ---> Package kernel-firmware.noarch 0:2.6.32-431.5.1.el6 will be updated ---> Package kernel-firmware.noarch 0:2.6.32-431.23.3.el6 will be an update Could this be the reason? What does "will be an update" mean? My /etc/grub.conf: # grub.conf generated by anaconda # # Note that you do not have to rerun grub after making changes to this file # NOTICE: You have a /boot partition. This means that # all kernel and initrd paths are relative to /boot/, eg. # root (hd0,0) # kernel /vmlinuz-version ro root=/dev/mapper/VolGroup00-root # initrd /initrd-[generic-]version.img #boot=/dev/vda default=0 timeout=5 splashimage=(hd0,0)/grub/splash.xpm.gz hiddenmenu password --encrypted $1$auui(i$sODM4ni/Zts9IlMWu.wWF/ title CentOS (2.6.32-431.23.3.el6.x86_64) root (hd0,0) kernel /vmlinuz-2.6.32-431.23.3.el6.x86_64 ro root=/dev/mapper/VolGroup00-root rd_NO_LUKS LANG=en_US.UTF-8 KEYBOARDTYPE=pc KEYTABLE=sv-latin1 rd_NO_MD rd_LVM_LV=VolGroup00/swap SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_LVM_LV=VolGroup00/root rd_NO_DM rhgb quiet rhgb quiet audit=1 initrd /initramfs-2.6.32-431.23.3.el6.x86_64.img title CentOS (2.6.32-431.5.1.el6.x86_64) root (hd0,0) kernel /vmlinuz-2.6.32-431.5.1.el6.x86_64 ro root=/dev/mapper/VolGroup00-root rd_NO_LUKS LANG=en_US.UTF-8 KEYBOARDTYPE=pc KEYTABLE=sv-latin1 rd_NO_MD rd_LVM_LV=VolGroup00/swap SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_LVM_LV=VolGroup00/root rd_NO_DM rhgb quiet rhgb quiet audit=1 initrd /initramfs-2.6.32-431.5.1.el6.x86_64.img title CentOS (2.6.32-431.el6.x86_64) root (hd0,0) kernel /vmlinuz-2.6.32-431.el6.x86_64 ro root=/dev/mapper/VolGroup00-root rd_NO_LUKS LANG=en_US.UTF-8 KEYBOARDTYPE=pc KEYTABLE=sv-latin1 rd_NO_MD rd_LVM_LV=VolGroup00/swap SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_LVM_LV=VolGroup00/root rd_NO_DM rhgb quiet rhgb quiet audit=1 initrd /initramfs-2.6.32-431.el6.x86_64.img

  Read the article

• Openvpn - stuck on Connecting

  - by user224277

  I've got a problem with openvpn server... every time when I trying to connect to the VPN , I am getting a window with login and password box, so I typed my login and password (login = Common Name (user1) and password is from a challenge password from the client certificate. Logs : Jun 7 17:03:05 test ovpn-openvpn[5618]: Authenticate/Decrypt packet error: packet HMAC authentication failed Jun 7 17:03:05 test ovpn-openvpn[5618]: TLS Error: incoming packet authentication failed from [AF_INET]80.**.**.***:54179 Client.ovpn : client #dev tap dev tun #proto tcp proto udp remote [Server IP] 1194 resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert user1.crt key user1.key <tls-auth> -----BEGIN OpenVPN Static key V1----- d1e0... -----END OpenVPN Static key V1----- </tls-auth> ns-cert-type server cipher AES-256-CBC comp-lzo yes verb 0 mute 20 My openvpn.conf : port 1194 #proto tcp proto udp #dev tap dev tun #dev-node MyTap ca /etc/openvpn/keys/ca.crt cert /etc/openvpn/keys/VPN.crt key /etc/openvpn/keys/VPN.key dh /etc/openvpn/keys/dh2048.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt #push „route 192.168.5.0 255.255.255.0? #push „route 192.168.10.0 255.255.255.0? keepalive 10 120 tls-auth /etc/openvpn/keys/ta.key 0 #cipher BF-CBC # Blowfish #cipher AES-128-CBC # AES #cipher DES-EDE3-CBC # Triple-DES comp-lzo #max-clients 100 #user nobody #group nogroup persist-key persist-tun status openvpn-status.log #log openvpn.log #log-append openvpn.log verb 3 sysctl : net.ipv4.ip_forward=1

  Read the article

• OpenVPN + iptables / NAT routing

  - by Mikeage

  Hi, I'm trying to set up an OpenVPN VPN, which will carry some (but not all) traffic from the clients to the internet via the OpenVPN server. My OpenVPN server has a public IP on eth0, and is using tap0 to create a local network, 192.168.2.x. I have a client which connects from local IP 192.168.1.101 and gets VPN IP 192.168.2.3. On the server, I ran: iptables -A INPUT -i tap+ -j ACCEPT iptables -A FORWARD -i tap+ -j ACCEPT iptables -t nat -A POSTROUTING -s 192.168.2.0/24 -o eth0 -j MASQUERADE On the client, the default remains to route via 192.168.1.1. In order to point it to 192.168.2.1 for HTTP, I ran ip rule add fwmark 0x50 table 200 ip route add table 200 default via 192.168.2.1 iptables -t mangle -A OUTPUT -j MARK -p tcp --dport 80 --set-mark 80 Now, if I try accessing a website on the client (say, wget google.com), it just hangs there. On the server, I can see $ sudo tcpdump -n -i tap0 tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on tap0, link-type EN10MB (Ethernet), capture size 96 bytes 05:39:07.928358 IP 192.168.1.101.34941 > 74.125.67.100.80: S 4254520618:4254520618(0) win 5840 <mss 1334,sackOK,timestamp 558838 0,nop,wscale 5> 05:39:10.751921 IP 192.168.1.101.34941 > 74.125.67.100.80: S 4254520618:4254520618(0) win 5840 <mss 1334,sackOK,timestamp 559588 0,nop,wscale 5> Where 74.125.67.100 is the IP it gets for google.com . Why isn't the MASQUERADE working? More precisely, I see that the source showing up as 192.168.1.101 -- shouldn't there be something to indicate that it came from the VPN? Edit: Some routes [from the client] $ ip route show table main 192.168.2.0/24 dev tap0 proto kernel scope link src 192.168.2.4 192.168.1.0/24 dev wlan0 proto kernel scope link src 192.168.1.101 metric 2 169.254.0.0/16 dev wlan0 scope link metric 1000 default via 192.168.1.1 dev wlan0 proto static $ ip route show table 200 default via 192.168.2.1 dev tap0

  Read the article

• Devices renamed with udev not working, original device node still there

  - by skerit

  I'm trying to rename certain video devices using udev. Here's a rule (broken down for readability): ACTION=="add", SUBSYSTEM=="usb", ATTR{busnum}=="1", ATTR{devpath}=="2", ATTR{idVendor}=="05e1", NAME="video97" It works. /dev/video97 is created But the original /dev/video1 node is STILL there. The even worse, when I try to view the /dev/video97 node in guvcview it doesn't work, while the original node DOES work.

  Read the article

• Software RAID 1 Configuration

  - by Corve

  I have created a software RAID 1 quite some while ago and it always seemed to work for me. However I am not completely sure that I have configured everything right and do not have the experience to check so I would be very grateful for some advice or just verification that all seems right so far. I am using Linux Fedora 20 (32 bit with plans to upgrade to 64bit) The RAID 1 should consist of two 1TB SATA hard drives. This is the output of mdadm --detail /dev/md0 /dev/md0: Version : 1.2 Creation Time : Sun Jan 29 11:25:18 2012 Raid Level : raid1 Array Size : 976761424 (931.51 GiB 1000.20 GB) Used Dev Size : 976761424 (931.51 GiB 1000.20 GB) Raid Devices : 2 Total Devices : 1 Persistence : Superblock is persistent Update Time : Sat Jun 7 10:38:09 2014 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 0 Spare Devices : 0 Name : argo:0 (local to host argo) UUID : 1596d0a1:5806e590:c56d0b27:765e3220 Events : 996387 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 0 1 active sync /dev/sda The RAID is mounted successfully: friedrich@argo:~ ? sudo mount -l | grep md0 /dev/md0 on /mnt/raid type ext4 (rw,relatime,data=ordered) Basically my question are: Why do I only have 1 active device? What does the State removed at bottom mean? Also I noticed some strange error messages that I see on the console on system start and shutdown and always repeating in the background when I switch with Ctrl + Alt + F2: ... ata2: irq_stat 0x00000040 connection status changed ata2: SError: { CommWake DevExch } ata2: COMRESET failed (errno=-32) ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen ata2: irq_stat 0x00000040 connection status changed ata2: SError: { CommWake DevExch } ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen ... Are these errors related to the RAID? Something seems wrong with the SATA devices.. All together the system works (I can read and write to the mounted raid) but I always had these strange errors on startup shutdown (probably always in the background). Thx for your help

  Read the article

< Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >