Search Results

Search found 17018 results on 681 pages for 'floppy disk drive'.

Page 68/681 | < Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >

• Can't detect hard drive on Macbook Pro

  - by MartinMoizard

  I changed a few month ago the config of my Macbook Pro with the following: I bought a SSD hard drive I removed the hard drive of my Mac book Pro and installed there my brand new SSD Then I removed my DVD drive and installed my hold hard drive instead with a caddy Everything was working great until today when I couldn't access anymore to my old hard drive because it is not detected anymore. Sometimes Mac OSX is mounting it but it takes like 15 min to browse a simple folder. I opened my laptop to have a look at the problem. It seemed like the optical drive connector was not plugged correctly to the motherboard (that connector: http://cl.ly/2T0X2e1j0J1g47061d1t). So I plugged it correctly and reboot. It didn't fix my problem. Then I tried to put my SSD in the caddy and to boot: no hard drive was detected. So I guess there is something wrong either with the caddy, either with the optical drive connector, or either with the plug that is on the motherboard. So my question is, how can I know where the problem comes from?

  Read the article

• Installed Windows 7 Ultimate on D Drive and previous Windows 7 Enterprise on C Drive has stopped starting up

  - by teenup

  Please please help! I have installed Windows 7 Ultimate on same hard drive on D Drive on my laptop and the previous Windows 7 Enterprise which was installed on C Drive is not booting up now. When I turn on my laptop, I see two Windows 7 on the screen, when I select newer one, it starts, but when I select older one which is Enterprise edition, system won't start and I get the DOS black screen with this error message: Windows Boot Manager Windows failed to start. A recent hardware or software change might be the cause. To fix the problem: Insert your Windows installation disc and restart your computer. Choose your language settings, and then click "Next." Click "repair your computer." Info: The boot selection failed because a required device is inaccessible. I notice that when I run the newer OS installed, the previous OS's drive (Which is D: now instead of C:) has become unusable and when I double click it, it asks me to format the drive. The data, that I had on my D Drive (Which is now C Drive for new OS), I had copied it to a network path and it is available. It was containing Windows 7 Users folder which I copied at that time when installing new windows. I have copied that Users folder again to the new OS's C Drive thinking it would run again, but of no use. Please please please...if someone can help...It is extremely required for me. Thanks a lot in advance.

  Read the article

• How to fix missing RAID1 drive

  - by Sodved

  I had to do some fiddling about with my cables inside thebox and now I am getting a "Critical Error" about the RAID disks during startup. I have a gigabyte GA-MA770T-UD3 motherboard. Aparently the RAID controller is an AMD SB710 chip. I'm pretty sure I know what happenned. The first time I rebooted I had forgotten the power cable on one of the disks in the RAID1 (mirror) and let it boot up. So I shut down and put the power back in. So now when it boots up I go into the RAID admin interface (between the BIOS screen and the OS loading): it shows the RAID1 as in error the logical device has one disk and says the other is disconnected or missing the other physical disk shows up as a single disk If I boot to the OS (Windows 7 32 bit) the data all seems to be there. If I go into computer management it says my partition is on a disk and working OK. But the other disk is offline because: "The disk is offline because it has a signature collision with another disk that is online" So I am guessing because I STUPIDLY booted up with only one of the disks powered on, the other disk fell out of synch with the mirror and so now cannot rejoin the mirror. How do I fix this? I want to get the RAID1 mirror working again. There does not appear to be any "Repair" option in the basic RAID admin tool which I get into during startup before the OS boots. I have not made any explicit changes to the online one (but I guess the OS has probably written some admin data).

  Read the article

• Problem with RAID5 (mdadm) - disk detached

  - by poscaman

  Having these lines in /var/log/syslog Apr 18 16:53:05 Server kernel: [4487878.816036] ata4: EH in SWNCQ mode,QC:qc_active 0x1 sactive 0x1 Apr 18 16:53:05 Server kernel: [4487878.816058] ata4: SWNCQ:qc_active 0x1 defer_bits 0x0 last_issue_tag 0x0 Apr 18 16:53:05 Server kernel: [4487878.816059] dhfis 0x1 dmafis 0x1 sdbfis 0x0 Apr 18 16:53:05 Server kernel: [4487878.816093] ata4: ATA_REG 0x40 ERR_REG 0x0 Apr 18 16:53:05 Server kernel: [4487878.816108] ata4: tag : dhfis dmafis sdbfis sacitve Apr 18 16:53:05 Server kernel: [4487878.816125] ata4: tag 0x0: 1 1 0 1 Apr 18 16:53:05 Server kernel: [4487878.816150] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen Apr 18 16:53:05 Server kernel: [4487878.816178] ata4.00: failed command: WRITE FPDMA QUEUED Apr 18 16:53:05 Server kernel: [4487878.816199] ata4.00: cmd 61/08:00:00:88:e0/00:00:e8:00:00/40 tag 0 ncq 4096 out Apr 18 16:53:05 Server kernel: [4487878.816200] res 40/00:00:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) Apr 18 16:53:05 Server kernel: [4487878.816253] ata4.00: status: { DRDY } Apr 18 16:53:05 Server kernel: [4487878.816272] ata4: hard resetting link Apr 18 16:53:05 Server kernel: [4487878.816274] ata4: nv: skipping hardreset on occupied port Apr 18 16:53:06 Server kernel: [4487879.676029] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 18 16:53:07 Server kernel: [4487880.416749] ata4.00: n_sectors mismatch 3907029168 != 268435455 Apr 18 16:53:07 Server kernel: [4487880.416752] ata4.00: revalidation failed (errno=-19) Apr 18 16:53:07 Server kernel: [4487880.416773] ata4.00: limiting speed to UDMA/133:PIO2 Apr 18 16:53:11 Server kernel: [4487884.676024] ata4: hard resetting link Apr 18 16:53:11 Server kernel: [4487884.676027] ata4: nv: skipping hardreset on occupied port Apr 18 16:53:12 Server kernel: [4487885.144032] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 18 16:53:12 Server kernel: [4487885.240185] ata4.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80) Apr 18 16:53:12 Server kernel: [4487885.240190] ata4.00: revalidation failed (errno=-5) Apr 18 16:53:12 Server kernel: [4487885.240210] ata4.00: disabled Apr 18 16:53:17 Server kernel: [4487890.144023] ata4: hard resetting link Apr 18 16:53:17 Server kernel: [4487891.024033] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 18 16:53:17 Server kernel: [4487891.033357] ata4.00: ATA-8: WDC WD20EARS-00S8B1, 80.00A80, max UDMA/133 Apr 18 16:53:17 Server kernel: [4487891.033360] ata4.00: 3907029168 sectors, multi 1: LBA48 NCQ (depth 31/32) Apr 18 16:53:17 Server kernel: [4487891.048347] ata4.00: configured for UDMA/133 Apr 18 16:53:17 Server kernel: [4487891.048361] sd 3:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Apr 18 16:53:17 Server kernel: [4487891.048365] sd 3:0:0:0: [sdc] Sense Key : Aborted Command [current] [descriptor] Apr 18 16:53:17 Server kernel: [4487891.048369] Descriptor sense data with sense descriptors (in hex): Apr 18 16:53:17 Server kernel: [4487891.048371] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 Apr 18 16:53:17 Server kernel: [4487891.048378] 00 00 00 00 Apr 18 16:53:17 Server kernel: [4487891.048382] sd 3:0:0:0: [sdc] Add. Sense: No additional sense information Apr 18 16:53:17 Server kernel: [4487891.048385] sd 3:0:0:0: [sdc] CDB: Write(10): 2a 00 e8 e0 88 00 00 00 08 00 Apr 18 16:53:17 Server kernel: [4487891.048393] end_request: I/O error, dev sdc, sector 3907028992 Apr 18 16:53:17 Server kernel: [4487891.048420] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048440] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048458] end_request: I/O error, dev sdc, sector 3907028992 Apr 18 16:53:17 Server kernel: [4487891.048477] md: super_written gets error=-5, uptodate=0 Apr 18 16:53:17 Server kernel: [4487891.048482] raid5: Disk failure on sdc, disabling device. Apr 18 16:53:17 Server kernel: [4487891.048483] raid5: Operation continuing on 3 devices. Apr 18 16:53:17 Server kernel: [4487891.048525] ata4: EH complete Apr 18 16:53:17 Server kernel: [4487891.048554] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048576] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048596] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048615] sd 3:0:0:0: [sdc] READ CAPACITY(16) failed Apr 18 16:53:17 Server kernel: [4487891.048617] sd 3:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK Apr 18 16:53:17 Server kernel: [4487891.048620] sd 3:0:0:0: [sdc] Sense not available. Apr 18 16:53:17 Server kernel: [4487891.048624] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048643] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048663] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048681] sd 3:0:0:0: [sdc] READ CAPACITY failed Apr 18 16:53:17 Server kernel: [4487891.048683] sd 3:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK Apr 18 16:53:17 Server kernel: [4487891.048685] sd 3:0:0:0: [sdc] Sense not available. Apr 18 16:53:17 Server kernel: [4487891.048689] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048709] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048800] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048860] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.049028] sd 3:0:0:0: [sdc] Asking for cache data failed Apr 18 16:53:17 Server kernel: [4487891.049048] sd 3:0:0:0: [sdc] Assuming drive cache: write through Apr 18 16:53:17 Server kernel: [4487891.049071] sdc: detected capacity change from 2000398934016 to 0 Apr 18 16:53:17 Server kernel: [4487891.049080] ata4.00: detaching (SCSI 3:0:0:0) Apr 18 16:53:18 Server kernel: [4487891.061149] sd 3:0:0:0: [sdc] Stopping disk Apr 18 16:53:18 Server kernel: [4487891.485492] RAID5 conf printout: Apr 18 16:53:18 Server kernel: [4487891.485496] --- rd:4 wd:3 Apr 18 16:53:18 Server kernel: [4487891.485500] disk 0, o:1, dev:sdb Apr 18 16:53:18 Server kernel: [4487891.485502] disk 1, o:0, dev:sdc Apr 18 16:53:18 Server kernel: [4487891.485504] disk 2, o:1, dev:sdd Apr 18 16:53:18 Server kernel: [4487891.485506] disk 3, o:1, dev:sde Apr 18 16:53:18 Server kernel: [4487891.497014] RAID5 conf printout: Apr 18 16:53:18 Server kernel: [4487891.497016] --- rd:4 wd:3 Apr 18 16:53:18 Server kernel: [4487891.497018] disk 0, o:1, dev:sdb Apr 18 16:53:18 Server kernel: [4487891.497019] disk 2, o:1, dev:sdd Apr 18 16:53:18 Server kernel: [4487891.497021] disk 3, o:1, dev:sde Apr 18 16:53:18 Server kernel: [4487891.838719] scsi 3:0:0:0: Direct-Access ATA WDC WD20EARS-00S 80.0 PQ: 0 ANSI: 5 Apr 18 16:53:18 Server kernel: [4487891.838886] sd 3:0:0:0: Attached scsi generic sg3 type 0 Apr 18 16:53:18 Server kernel: [4487891.838911] sd 3:0:0:0: [sdf] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) Apr 18 16:53:18 Server kernel: [4487891.838964] sd 3:0:0:0: [sdf] Write Protect is off Apr 18 16:53:18 Server kernel: [4487891.838967] sd 3:0:0:0: [sdf] Mode Sense: 00 3a 00 00 Apr 18 16:53:18 Server kernel: [4487891.838988] sd 3:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Apr 18 16:53:20 Server kernel: [4487891.839147] sdf: unknown partition table Apr 18 16:53:20 Server kernel: [4487893.130026] sd 3:0:0:0: [sdf] Attached SCSI disk Right now, i'm unable to do anything on /dev/sdc. Is there any way to try to re-attach it? I don't want to power-down the server unless absolutely necessary System: Debian Stable 2.6.32-5-amd64 mdadm version 3.1.4-1+8efb9d1 cat /proc/mdstat Personalities : [raid6] [raid5] [raid4] md0 : active raid5 sdb[0] sdc[4](F) sde[3] sdd[2] 5860543488 blocks level 5, 64k chunk, algorithm 2 [4/3] [U_UU] unused devices: <none> mdadm --examine --scan ARRAY /dev/md0 UUID=1a7744b5:912ec7af:f82a9565:e3b453b4

  Read the article

• NAS4Free disk encryption and ZFS error

  - by MiNT

  I have installed a NAS4Free on a VM, and as recommended, i installed it on a 1GB virtual disk, and assigned another disk 500GB to this VM for file storage. I have created the disk, encrypted it, created a ZFS virtual disk, and then a ZFS storage pool. Everything was working. On every restart of this VM i needed to go on and mount the encrypted drive. Recently i upgraded the host machine, and now i cant mount or make it work. I have tried removing everything and setting up from scratch everything, with the exception of formating the disk, i have used an encrypted one without formating it. Does anybody have any suggestion on how can i at least get back my data, can i mount somehow the encrypted drive even in another utility, just need to get back the data that were on it.

  Read the article

• Convert Spanned Dynamic disk to Basic Help needed.

  - by Mouradb

  Hello all, Here is my scenario; Windows 2008 server on a VM Two VM disks; Disk1 OS Basic Disk2 Data and an Installed Application. Basic Durng the weekend, I was playing with this VM, I wanted to add some space to the Disk2. Created a new disk (disk3), converted it to a Dynamic volum and added this to disk 2 (disk 2 also converted to Dynamic volume) and for some reason these now are spanned volumes. just like an IDOT, I haven't taken any snapshot of this before I've made the changes. My question, is there a way I can re-convert this again to Basic? I don't want to delete and recreate the disk volumes because of the application installed on the disk 2 Any solution or tips I can use?

  Read the article

• How do I make a VMDK format virtual hard drive from a physical partition on a disk?

  - by Ahmad

  I have a 320 GB HDD, which actually only has an 80 GB NTFS format partition which was being used by a Windows 7 system ... I want to create a VMDK format clone of this partition, so that I can use it with VMware .. However, tradition VMDK creation programs normally make a VMDK for an entire disk, whereas I just want to make a VMDK for the one 80 GB partition ... This is important because the other 240 GB on the physical source HDD is just unallocated area, and including that in a VMDK file is just a plain waste of space .. So how to make a VMDK file for a specific partition ? Any tool available for this ?

  Read the article

• Fedora 11 System - Failed Hard Drive Removed, and Boot gets GRUB Hard Disk Error

  - by user38030

  Greetings, I have a machine with a 120GB ATA drive that has what I thought to be non-essential data on it. I also have a 320GB SATA hard drive with the OS/Application/Files (good data I want to keep). My 120GB ATA is failing I believe, as my computer kept slowing to a halt. However, when I move the drive from BIOS my computer will not start, says "GRUB Hard Disk Error". I know that my Fedora system has an LVM setup. I am looking to just remove the 120GB drive from "the mix", and just have one hard drive. How do I recover ? Thank you. I have access to a Linux Live CD right now and can make any changes. However, it won't boot into my OS - it fails.

  Read the article

• DBan not working because disk has bad sectors? [migrated]

  - by canadiancreed

  Attempting to wipe the drive of a laptop that I have before it's sold, and normally use DBAN to do so. However this time it starts and then finishes instantly with the following message. "DBAN finished with non-fatal errors This is usually cause by disks with bad sectors" Have tried multiple flags such as noverify to force it to skip this check (it doesn't show bad sectors in the OS scan in windows). but the error always comes back. This is the only time that I've seen this message, as every other of the few drives I've used this software on usually take 3-5 hours to do their job.

  Read the article

• Cannot find my hard disk while installing linux-“No root file system defined” error

  - by Syam Kumar S

  I am trying install Linux on my computer (tried Ubuntu 10.4 and Linux Mint 9). I started the installation wizard and on the hard disk selection page the hard disk is not displayed. I have a 500GB disk with 5 partitions and windows 7 ultimate in one partition. If I click the forward button, it shows an error- "No root file system defined". I have tried to install by booting from CD and pendrive but both shows the same error. When I load Linux as live CD it doesn't show the hard disk. My hard disk works fine in windows 7. System config: intel i3 2100, 500GB hdd, 2GB ram

  Read the article

• Burning a Custom CD/DVD software Image

  - by Iceking007

  Hello I am trying to Burn a disk let me catch you up where I am at as I have a very SPECIFIC question and it may be difficult to explain but I will try to keep it simple: I have software already in an ISO file; I am using Daemon tools on a Windows based PC What I am wanting to do is create the actual Picture (not disk image file) that will show up on the Disk drive when I insert the disk Eg: if you put microsoft Office 11 in your comp. you open up My Computer to view all your HD and Disk drives you will see the image that microsoft put on the disk which is a silver CD and the Microsoft Office logo on the top corner. I would like to know how to edit my current ISO file or what I need to do in order to put "A PICTURE" or "AN ICON FILE" on the CD/DVD so that when I insert the disk into any PC it will show up with the PICTURE OR ICON file I chose and look proffessional. Thank you for your time

  Read the article

• RAID1 rebuild fails due to disk errors

  - by overlord_tm

  Quick info: Dell R410 with 2x500GB drives in RAID1 on H700 Adapter Recently one of drives in RAID1 array on server failed, lets call it Drive 0. RAID controller marked it as fault and put it offline. I replaced faulty disk with new one (same series and manufacturer, just bigger) and configured new disk as hot spare. Rebuild from Drive1 started immediately and after 1.5 hour I got message that Drive 1 failed. Server was unresponsive (kernel panic) and required reboot. Given that half hour before this error rebuild was at about 40%, I estimated that new drive is not in sync yet and tried to reboot just with Drive 1. RAID controller complained a bit about missing RAID arrays, but it found foreign RAID array on Drive 1 and I imported it. Server booted and it runs (from degraded RAID). Here is SMART data for disks. Drive 0 (the one that failed first) ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 1 3 Spin_Up_Time POS--K 142 142 021 - 3866 4 Start_Stop_Count -O--CK 100 100 000 - 12 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 086 086 000 - 10432 10 Spin_Retry_Count -O--CK 100 253 000 - 0 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 11 192 Power-Off_Retract_Count -O--CK 200 200 000 - 10 193 Load_Cycle_Count -O--CK 200 200 000 - 1 194 Temperature_Celsius -O---K 112 106 000 - 31 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 198 000 - 3 And Drive 1 (the drive which was reported healthy from controller until rebuild was attempted) ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 35 3 Spin_Up_Time POS--K 143 143 021 - 3841 4 Start_Stop_Count -O--CK 100 100 000 - 12 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 086 086 000 - 10455 10 Spin_Retry_Count -O--CK 100 253 000 - 0 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 11 192 Power-Off_Retract_Count -O--CK 200 200 000 - 10 193 Load_Cycle_Count -O--CK 200 200 000 - 1 194 Temperature_Celsius -O---K 114 105 000 - 29 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 3 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 In extended error logs from SMART I found: Drive 0 has only one error Error 1 [0] occurred at disk power-on lifetime: 10282 hours (428 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 18 00 00 00 6a 24 20 40 00 Error: IDNF at LBA = 0x006a2420 = 6956064 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 60 00 f8 00 00 00 6a 24 20 40 00 17d+20:25:18.105 WRITE FPDMA QUEUED 61 00 18 00 60 00 00 00 6a 24 00 40 00 17d+20:25:18.105 WRITE FPDMA QUEUED 61 00 80 00 58 00 00 00 6a 23 80 40 00 17d+20:25:18.105 WRITE FPDMA QUEUED 61 00 68 00 50 00 00 00 6a 23 18 40 00 17d+20:25:18.105 WRITE FPDMA QUEUED 61 00 10 00 10 00 00 00 6a 23 00 40 00 17d+20:25:18.104 WRITE FPDMA QUEUED But Drive 1 has 883 errors. I see only few last ones and all errors I can see look like this: Error 883 [18] occurred at disk power-on lifetime: 10454 hours (435 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 01 -- 51 00 80 00 00 39 97 19 c2 40 00 Error: AMNF at LBA = 0x399719c2 = 966203842 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 80 00 00 00 00 39 97 19 80 40 00 1d+00:25:57.802 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 00 1d+00:25:57.779 READ LOG EXT 60 00 80 00 00 00 00 39 97 19 80 40 00 1d+00:25:55.704 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 00 1d+00:25:55.681 READ LOG EXT 60 00 80 00 00 00 00 39 97 19 80 40 00 1d+00:25:53.606 READ FPDMA QUEUED Given those errors, is there any way I can rebuild RAID back, or should I make backup, shutdown server, replace disks with new ones and restore it? What about if I dd faulty disk to new one from linux running on USB/CD? Also, if anyone have more experiences, what could be causes for those errors? Crappy controller or disks? Disks are about 1 year old, but it is pretty unbelievable to me that both would die within so short timespan.

  Read the article

• "Disk boot failure" error after installing Windows 7 on SSD

  - by Tony_Henrich

  I have a system with 3 SATA drives which runs fine. Got a new SSD drive and wanted to install a fresh Windows-7 on it. So I removed the boot drive and replaced it with the SSD drive. Installed Windows and when it was done, rebooted and now I get "Disk boot failure. Insert system disk and press enter" error message. I reinstall again and still same message. Removed the SSD and put back the original drive and I got the same message!! I checked the BIOS and things look good. Something is wrong. Two questions: 1- Why isn't the new Windows booting from the SSD? 2- Why isn't the machine booting using the previous working configuration anymore, after removing the SSD? I did connect it during the second Windows installation but it was the last drive in the SATA connector. Would Windows installer mess with its MBR sector?

  Read the article

• Can hard drives experience magnetic interference from a server chassis?

  - by eek142

  I'm currently building a server, and it's exhibiting the weirdest behavior with the hard drive. It is a 2U case, and I have trouble trouble accessing the Seagate SATAIII hard drive when it is in the bottom slot of the hard drive cage. The case is made of galvanized/anodized steel. I thought the drive was DOA, but then I swapped it into the top slot, and the problem was solved--the system had no trouble recognizing the drive anymore! This got me thinking: Is it possible that the magnetic field from the chassis was affecting the hard drive's functionality? I only have this problem with the mechanical hard drive, not the SSD. Could it be because the chassis is made of steel? I'm baffled.

  Read the article

• My C disk show 33gb less space then i have bcs of hidden or encrypted files i cant find

  - by Peter

  Hello I was hoping some one could help me my drive has 92gbs used space, 95gbs free out of 220 partition 33gbs in the air i cant find, already did cleanup, emptied recycle bin, history and temp files also and I believe sin Ive seen before its possibly space my brother used with a program he uses to hide (possibly encrypted) files dont know the name just seen him do it on usb and pc dont appear visible or hidden and result is what you read above is there any way of finding them to delete them hence my brother is nowhere to b found or could it be something else??? already tried freecommander also.

  Read the article

• How to have file/folder icons use a relative path?

  - by Memor-X

  On my portable hard drive I set icons for almost every organized folder. All these icons are located in an Icons folder located on the root directory of the same hard drive. When I change the drive letter of the hard drive (well I don't, windows does automatically sometimes) these icons are lost. So far this hard drive is assigned to F: While it's not a problem now, it may becomes a problem if I upgrade my computer or get a new one and the F: Drive is already taken up for something else. It's also annoying on networks where F: is mapped to a network drive.

  Read the article

• mdadm raid5 recover double disk failure - with a twist (drive order)

  - by Peter Bos

  Let me acknowledge first off that I have made mistakes, and that I have a backup for most but not all of the data on this RAID. I still have hope of recovering the rest of the data. I don't have the kind of money to take the drives to a recovery expert company. Mistake #0, not having a 100% backup. I know. I have a mdadm RAID5 system of 4x3TB. Drives /dev/sd[b-e], all with one partition /dev/sd[b-e]1. I'm aware that RAID5 on very large drives is risky, yet I did it anyway. Recent events The RAID become degraded after a two drive failure. One drive [/dev/sdc] is really gone, the other [/dev/sde] came back up after a power cycle, but was not automatically re-added to the RAID. So I was left with a 4 device RAID with only 2 active drives [/dev/sdb and /dev/sdd]. Mistake #1, not using dd copies of the drives for restoring the RAID. I did not have the drives or the time. Mistake #2, not making a backup of the superblock and mdadm -E of the remaining drives. Recovery attempt I reassembled the RAID in degraded mode with mdadm --assemble --force /dev/md0, using /dev/sd[bde]1. I could then access my data. I replaced /dev/sdc with a spare; empty; identical drive. I removed the old /dev/sdc1 from the RAID mdadm --fail /dev/md0 /dev/sdc1 Mistake #3, not doing this before replacing the drive I then partitioned the new /dev/sdc and added it to the RAID. mdadm --add /dev/md0 /dev/sdc1 It then began to restore the RAID. ETA 300 mins. I followed the process via /proc/mdstat to 2% and then went to do other stuff. Checking the result Several hours (but less then 300 mins) later, I checked the process. It had stopped due to a read error on /dev/sde1. Here is where the trouble really starts I then removed /dev/sde1 from the RAID and re-added it. I can't remember why I did this; it was late. mdadm --manage /dev/md0 --remove /dev/sde1 mdadm --manage /dev/md0 --add /dev/sde1 However, /dev/sde1 was now marked as spare. So I decided to recreate the whole array using --assume-clean using what I thought was the right order, and with /dev/sdc1 missing. mdadm --create /dev/md0 --assume-clean -l5 -n4 /dev/sdb1 missing /dev/sdd1 /dev/sde1 That worked, but the filesystem was not recognized while trying to mount. (It should have been EXT4). Device order I then checked a recent backup I had of /proc/mdstat, and I found the drive order. md0 : active raid5 sdb1[0] sde1[4] sdd1[2] sdc1[1] 8790402048 blocks super 1.2 level 5, 512k chunk, algorithm 2 [4/4] [UUUU] I then remembered this RAID had suffered a drive loss about a year ago, and recovered from it by replacing the faulty drive with a spare one. That may have scrambled the device order a bit...so there was no drive [3] but only [0],[1],[2], and [4]. I tried to find the drive order with the Permute_array script: https://raid.wiki.kernel.org/index.php/Permute_array.pl but that did not find the right order. Questions I now have two main questions: I screwed up all the superblocks on the drives, but only gave: mdadm --create --assume-clean commands (so I should not have overwritten the data itself on /dev/sd[bde]1. Am I right that in theory the RAID can be restored [assuming for a moment that /dev/sde1 is ok] if I just find the right device order? Is it important that /dev/sde1 be given the device number [4] in the RAID? When I create it with mdadm --create /dev/md0 --assume-clean -l5 -n4 \ /dev/sdb1 missing /dev/sdd1 /dev/sde1 it is assigned the number [3]. I wonder if that is relevant to the calculation of the parity blocks. If it turns out to be important, how can I recreate the array with /dev/sdb1[0] missing[1] /dev/sdd1[2] /dev/sde1[4]? If I could get that to work I could start it in degraded mode and add the new drive /dev/sdc1 and let it resync again. It's OK if you would like to point out to me that this may not have been the best course of action, but you'll find that I realized this. It would be great if anyone has any suggestions.

  Read the article

• Full disk encryption on linux (ubuntu) w/o re-installing - possible?

  - by sa125

  Hi - I work at a company that takes security very seriously (like most). Our IT guy came in today to prepare us mentally to re-install our systems after he'll apply the new encryption policy (which will basically scrape our HD clean). For our team this means about a week of re-configuring, installing, and tweaking our desktops until we are back to work capacity - anyone who has to re-install a development machine probably knows what I'm talking about. So, I guess my question is if there's any way to perform full disk encryption on a linux (ubuntu = 9.04) system without having to re-install EVERYTHING [sigh]. IT guy said there isn't any - please prove him wrong. thanks :)

  Read the article

• Unable to see a newly added virtual disk in Virtualbox

  - by uswaretech

  I am using virtualbox with Host: Ubuntu 9.10 Guest Win 7 My old virtual disk was filing up so I added a new virtual disk. After I restarted the guest, I can not see it in the My computer. I can see a new disk in the device manager though. The new disk was added as primary slave. What do I need to do to see it? I am guess I need to format the new virtual disk, but since I dont see any drive letter mapped to it, I am not sure of how to do this.

  Read the article

• Is there such thing as hardware encrypted raid disk?

  - by Dumitrescu Bogdan

  I have a server for which I want to protect the content. The server is located on a clients premises. Is there a way to encrypt the content of a RAID DISK (at hardware level) ? What I need is that the server will not be able to start as long as the required password is not provided (the encryption key) I will give the best answer to Miles, though the answer was not exactly to my question. But from all the comments, it seems that it cannot be done hardware or .. it cannot be done as I would like to.

  Read the article

• why is usb disk corrupted by Vista restore

  - by Martin

  I have a laptop with Vista Business on an 80GB disk. I have created a full backup and stored that on the original 80GB drive. On my new 320GB disk, I have created a partition with exactly the same number of bytes as the original 80GB disk. I swap the disks so that the 320GB is internal, and the 80GB is in a USB caddy. I boot from the NEO restore CD and everything looks fine: I select the dump on the USB drive, target is drive C:, start the restore. After a few seconds, the restore fails with "not enough disks in machine or disk not large enough" error (I did note the exact phrase). I then swap the 80GB disk back to the internal drive, but the thing is unbootable. Why has the restore process scrubbed the boot status of the USB drive ?

  Read the article

• Server hard disk read speed and client download speed, is there a connection? [closed]

  - by Mywiki Witwiki

  Ok so a client's download speed is only as fast as a server's upload speed, and vice versa. Based on the answers to this post: Does upload speed depend upon download speed of the server? In other words, the data transfer rate between the two computers is only as fast as the speed of the "bottleneck". Let's pretend the two computers are in two different networks and both have 100Mbps internet connection. Ben wants a copy of a file in Mark's computer hard disk with 30Mbps read speed. Does this mean that Ben can download the file at a speed of around 30Mbps only, despite having an internet connection faster than 30Mbps?

  Read the article

• How to set path of Virtual PC hard disk differencing parent

  - by Barry Kelly

  I have an old Windows XP Mode vhd backed up from my previous system, but I'm having difficulty getting it running on the new system. The vhd is a differencing disk, and its parent is the standard Windows XP Mode base; I still have the old parent, and have verified it is binary identical to the XP Mode base in my new installation of XP Mode. But in the new system, the path to the differencing disk parent is different than the old. When I open up the settings for the .vmcx for my old XP mode, and select "Hard Disk 1", the "Virtual hard disk file" is set correctly, but the "Parent Disk:" field is pointing at the wrong path, and I can't see any way to edit it. Does anyone know how?

  Read the article

• How to Disable Disk Quota When Checkbox is Grayed Out in Windows XP?

  - by Webs

  I am logged in as Administrator on a computer that is removed from the domain, it is only in a workgroup. I was trying out different settings and turned on disk quota. I set the quota limit pretty low and didn't realize it would have an effect on the Admin acct. Now when I log in a temporary profile gets created and the option to remove the quota is grayed out. I am in Safe Mode right now and can't seem to un do the quota with the admin acct. Did I change another setting somewhere that striped away my rights to remove the quota? Does anyone have any ideas beyond reinstalling?

  Read the article

• Is really good have a big (500GB/1T) Hard Disk as main one!?

  - by aSeptik

  Hi All guys! ;-) i'm building my new PC so i'm starting the usual search for a good hardware/price around the net! but this time i'm not sure i want buy a big Hard Disk! i was thinking to have a "very small" HD like 50GB as main one and external (big) for store all other stuff! Assuming i'm using classic slow softwares like adobe suite (photoshop, flash, autodesk) and some very simple soft like notepad, php and so on...! do you think this is a good practice for improve performance/speed or i'm jast saying some stupid thing!?

  Read the article

< Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >