Search Results

Search found 23472 results on 939 pages for 'show'.

Page 685/939 | < Previous Page | 681 682 683 684 685 686 687 688 689 690 691 692  | Next Page >

• Can't do more than one activity at a time after switching modems

  - by vallorn

  I had to replace the Motorola 2210 DSL modem that I got when I signed up for AT&T DSL Direct a few years ago. The modem kept randomly restarting and it eventually gave out on me. I am assuming overheating was the cause here because it was almost too hot to touch. In any case, I replaced it with a Netgear DM111PSP. It works fine but I can't do more than one activity at a time with it. If my wife is watching Netflix, there is a noticeable delay/latency when trying to view web sites. It's even worse if I try to play an on-line game while she's streaming; the game is basically unplayable. The odd thing is, the only other activity I can do while she's streaming is stream another Netflix show myself. There is no delay when doing that, no buffering either. I'm not a networking guy so maybe there is an explanation for it but I find that kind of odd. I've tried using QoS through my Buffalo N600 wireless router and it doesn't seem to help. With the old Motorola modem, she could be watching Netflix while I play a game and everything worked just fine. Is there anything I can check or reconfigure possibly on the modem that would account for this? Should I just ditch the Netgear and get another modem instead? I have the Netgear modem connected to the Buffalo router in a bridged mode. Its the same exact setup as I had with the Motorola and as far as I can tell, it's not the router that is the cause.

  Read the article

• Single Sign On for intranet with Apache and Linux MIT Kerberos

  - by Beerdude26

  Greetings, I am looking for a way to do a single sign on to an intranet in the following manner: A Linux user logs on via a graphical frontend (for example, GNOME). He automatically requests a TGT for his username from the MIT Kerberos KDC. Via some way or another, the Apache server (which we'll assume is on the same server as the KDC), is informed that this user has logged in. When the user accesses the intranet, he is automatically granted access to his web applications. I don't think I've seen this kind of functionality while searching the net. I know the following possibilities exist: Using an authentication module such as mod_auth_kerb, a user is presented with a login prompt to enter his username and password, which are then authenticated against the MIT Kerberos server. (I would like this to be automatic.) IIS supports integrated Windows logon via ASP.Net when the user is part of an Active Directory. (I'm looking for the Linux / Apache equivalent.) Any suggestions, criticism and ideas are highly appreciated. This is for a school project to show a proof-of-concept, so every handy piece of information is more than welcome. :)

  Read the article

• Why is the link between my switch and my router always negotiating half-duplex mode?

  - by Massimo

  I have a Cisco 2950 switch which has one of its ports connected to an Internet router provided by my ISP; I have no access to the router configuration, but I manage the switch. If I leave all switch ports with their default setup (auto-negotiation of speed and duplex mode), this link always connects at 100 MBit/s, but in half-duplex mode. I've tried replacing the cable, and also moving the link to another switch port: the result is always the same. A different device connected to the same port (or to any switch port, really) shows no problem at all. It could be guesed that someone configured the router to only connect in half-duplex mode... BUT, here's the catch: if I manually force the switch port to full-duplex mode (duplex full in the interface configuration), the link goes up, stays up and is completely stable. So: The connection is not forced to half-duplex mode by the router, otherwise it would not connect at all if I force the switch end to full-duplex. There is no actual link problem, otherwise the full-duplex connection would not go up or would at least show some errors. But if I leave the port free to auto-negotiate, it always connects in half-duplex mode. Why?

  Read the article

• COMPAQ Tower No Signal to monitor

  - by Lancelot

  Hi there, I have had some troubles with this: I received a compaq tower: Compaq Presario SR1224NX Onboard VGA Windows XP SP2 from a friend. It was given to me on condition i give her the files back. My plan was to turn this into an Ubuntu Server. It booted up no problems even with the ubuntu live disc. After a normal shutdown(not unpluggin the power cord and not doing a hard shutdown with the power button), it would not restart even after SEVERAL attempts. I realized the light next to the power supply would flash very rapidly. I researched and found out it was one of two things: a dead power supply or the cables to the motherboard and to the disks etc. Thus i checked to ensure the cables were fine(and they were). I purchased a Power Supply (this one has 400 watts, the initial had 250) and installed it. The tower now boots. It booted into the live disk and everything. After a normal shutdown, it now restarts but is not sending signal to my monitor. I have tried several monitors in which i assure work perfectly but not with this tower(i recall it did show display after replacing the power supply). The monitors are ACER. This is different than most "no Signal" problems since i am not using an external Video Card, this is onboard VGA. Thanks!

  Read the article

• Serving only certain files from a directory to users on IIS7

  - by HarbingTarbl

  I'm have a need to show the most up to date version of a certain file in a directory to users who access a folder on my site (lets call this folder logs). I can't just move the file into the folder as another process relies on being able to find and edit this file while it is running. At first I had thought I could just create a folder on my site, give it the correct permissions and then create a symbolic link to the file. However it seems IIS7 does not follow symlinks. Another solution would be to create a phpscript that pulls the correct file and displays it, but that felt like over-engineering the solution. I know that on Apache this would be simple, but I can't figure out how to do it with IIS7. To give an idea of the folder structure I'm working with. The directory looks like this. Root --File I need to serve. --File containing plain text passwords. --Other folders/files. I can't move any of these files. If I just serve the entire directory using Virtual Directories in IIS I'll also be sharing files and folders containing configuration and other sensitive information.

  Read the article

• Menu command stuck on screen

  - by 280Z28

  For some reason, periodically when I select a menu command, the command label gets "stuck" on the screen and won't go away. I can close all open applications, including whichever one I was using when it got stuck, but it still won't go away. In the screenshot below, I opened an new instance of IE just to show how the label stays on top. The label was not created by this instance of IE. Edit with the source: The label that gets stuck is the first menu command I select in IE. If a label is already stuck, a new one does not get stuck (regardless of which instance(s) of IE are involved). Based on this knowledge, I now just open IE on my secondary monitor, carefully open the context menu so the Properties command is in the bottom corner, and click it. This is not a solution... The label never moves and is transparent to mouse input (if I click it, it's as if I clicked the item behind it). The label does not go away if I close all running applications. I haven't tried stopping services or closing system tray items like Live Mesh. The label does go away if I change the screen resolution and then change it back. Any ideas how I can stop this from happening? It's happened a half dozen times since yesterday and it's becoming quite disrupting to my work. Obviously I added the circle in MS Paint. That part isn't stuck. ;)

  Read the article

• Mac OS X software always order files alphabetically rather than by type.

  - by george

  I have noticed many Mac applications sort the files alphabetically rather than by type. A good example would be Coda by panic.com. The files in the file menu are organized alphabetically. I requested for them to add the feature to organize files by type, and they've said that it's a Finder thing. So I looked at other applications to see if they were organizing by type. I noticed Dreamweaver CS4 had this same problem and now including Dreamweaver CS5. There has to be something in the Mac that does this and that I can modify. I played with Spotlight and it now displays its files by type (thinking that's what I can do) but it didn't take effect in other applications. What library are these applications using to display a file menu for their files? here is an example-- file menu layout of coda by panic.com. (i couldnt post another link because it wouldnt let me). can you see how everything is organised alphabetically rather than by folder? i just want the file menu to show all folders first then all the files. 1) http://www.iaddesign.com/coda.png there must be a way to modify mac to let me to do this.

  Read the article

• Disk IO slow on ESXi, even slower on a VM (freeNAS + iSCSI)

  - by varesa

  I have a server with ESXi 5 and iSCSI attached network storage(4x1Tb Raid-Z on freenas 8.0.4). Those two machines are connected to each other with Gigabit ethernet. The raid-z volume is divided into three parts: two zvols, shared with iscsi, and one directly on top of zfs, shared with nfs and similar. I ssh'd into the freeNAS box, and did some testing on the disks. I used ddto test the third part of the disks (straight on top of ZFS). I copied a 4GB (2x the amount of RAM) block from /dev/zero to the disk, and the speed was 80MB/s. Other of the iSCSI shared zvols is a datastore for the ESXi. I did similar test with time dd .. there. Since the dd there did not give the speed, I divided the amount of data transfered by the time show by time. The result was around 30-40 MB/s. Thats about half of the speed from the freeNAS host! Then I tested the IO on a VM running on the same ESXi host. The VM was a light CentOS 6.0 machine, which was not really doing anything else at that time. There were no other VMs running on the server at the time, and the other two "parts" of the disk array were not used. A similar dd test gave me result of about 15-20 MB/s. That is again about half of the result on a lower level! Of course the is some overhead in raid-z - zfs - zvolume - iSCSI - VMFS - VM, but I don't expect it to be that big. I belive there must be something wrong in my system. I have heard about bad performance of freeNAS's iSCSI, is that it? I have not managed to get any other "big" SAN OS to run on the box (NexentaSTOR, openfiler). Can you see any obvious problems with my setup?

  Read the article

• lm-sensors - always returns 32 degrees (celsius) for temperature

  - by mopoke

  On my VIA EPIA motherboard (using VIA VT8231 ISA bridge), I get strange output for the lm-sensors temperature reading. It always returns 32 degrees (celsius). I have previously had correct output for temperature (my munin graphs show temperatures typically in the range of 50 to 60 degrees. I've tried uninstalling (and purging) the lm-sensors package, have re-run sensors-detect a number of times and rebooted but nothing seems to change the output. I am running Ubuntu Karmic Koala (9.10). Anyone got any bright ideas on what I might have missed? uname -a: Linux george 2.6.31-16-386 #53-Ubuntu SMP Tue Dec 8 06:39:34 UTC 2009 i686 GNU/Linux cpuinfo: processor : 0 vendor_id : CentaurHauls cpu family : 6 model : 7 model name : VIA Samuel 2 stepping : 3 cpu MHz : 399.000 cache size : 64 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu de tsc msr cx8 mtrr pge mmx 3dnow up bogomips : 800.04 clflush size : 32 power management: lspci: 00:00.0 Host bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia] (rev 05) 00:01.0 PCI bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia AGP] 00:11.0 ISA bridge: VIA Technologies, Inc. VT8231 [PCI-to-ISA Bridge] (rev 10) 00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 00:11.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1e) 00:11.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1e) 00:11.4 Bridge: VIA Technologies, Inc. VT8235 ACPI (rev 10) 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 40) 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 51) 01:00.0 VGA compatible controller: Trident Microsystems CyberBlade/i1 (rev 6a) sensors: acpitz-virtual-0 Adapter: Virtual device temp1: +32.0°C (crit = +60.0°C)

  Read the article

• redirect temporarily STDOUT to another file descriptor, but still to screen

  - by Carlos Campderrós

  I'm making a script that executes some commands inside, and these commands show some output on STDOUT (and STDERR as well, but that's no problem). I need that my script generates a .tar.gz file to STDOUT, so the output of some commands executed in the script also go to STDOUT and this ends with a not valid .tar.gz file in the output. So, in short, it's possible to output the first commands to the screen (as I still want to see the output) but not via STDOUT? Also I would like to keep the STDERR untouched so only error messages appear there. A simple example of what I mean. This would be my script: #!/bin/bash # the output of these commands shouldn't go to STDOUT, but still appear on screen some_cmd foo bar other_cmd baz #the following command creates a tar.gz of the "whatever" folder, #and outputs the result to STDOUT tar zc whatever/ I've tried messing with exec and the file descriptors, but I still can't get it to work: #!/bin/bash # save STDOUT to #3 exec 3>&1 # the output of these commands should go to #3 and screen, but not STDOUT some_cmd foo bar other_cmd baz # restore STDOUT exec 1>&3 # the output of this command should be the only one that goes to STDOUT tar zc whatever/ I guess I'm lacking closing STDOUT after the first exec and reopen it again or something, but I can't find the right way to do it (right now the result is the same as if I didn't add the execs

  Read the article

• Email bouncing sent from Google

  - by davidmck

  I'm hoping someone here has an idea of where to look next. We have a domain we support which has email sent to it from one particular user bounce with the following message: Delivery to the following recipient failed permanently: [email protected] Technical details of permanent failure: Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 550 550 Unrouteable address (state 14). We only have reports of bouncing form this one particular user (who is someone we don't support - except they'd like to be able to contact our customer and we're trying to figure out if the problem is on our end). Many people can successfully send to this domain and the user who is getting bounce messages can send to other domains that we support (so it's clearly something specific with the princetonscoop.com domain and not our setup in general). I've reviewed the MX records multiple times and the server logs don't show a connection which generates this error (in fact this error is not one that our mail server would ever return). So it appears that google is contacting a different mail server for some reason. I have tested sending from my gmail account and that works. I believe the sender is using a google-apps account (the account they are using is from their own domain, not a gmail account). Any ideas on what might be happening here or what to test/investigate next? Thanks.

  Read the article

• Exchange Server 2010: move mailboxes from recoveded and mounted edb to user's mailbox

  - by user36090

  One of our exchange servers crashed, and I am trying to recover the mailboxes. We had 1 exchange 2003 server named "apex" and 1 exchange 2010 server named "2008Enterprise. the exchange 2010 server named "2008Enterprise" crashed. I created a new exchange 2010 server named "Providence". I ran the command on Providence: New-MailboxDatabase -Recovery -Name JBCMail -Server Providence -EdbFilePath "c:\data\Exchange\Mailbox\Mailbox Database 0579285147\Mailbox Database 0579285147.edb" -LogFolderPath "c:\data\Exchange\Mailbox\Mailbox Database 0579285147" this command executed and finished without error I then ran the command: eseutil /p E00 this command was executed from the below directory: c:\data\Exchange\Mailbox\Mailbox Database 0579285147 I then mounted the JBCMail with the mount command note: I do not have my full typed command. Inside my Exchange Management Console (EMC) I can view the new mailbox database named JBCMail. The JBCMail database is show as mounted on the exchange server named Providence. I can see the crashed Exchange server named 2008Exchange. In the EMC the crashed exchange server states the Copy Status under ServerConfiguration-Mailbox is ServiceDown. From here I need to recover three mailboxes The mail boxes are on the apex server. How do I move the mailboxs from apex to Providence? How do I restore the mailboxes from JBCmail mounted database to the user's mailbox? I do not fully understand how to use the Restore-Mailbox command because when I use this command it tries to restore the mailbox to the dead apex server. Restore-Mailbox -ID 'Jason Young' -RecoveryDatabase JBCMail

  Read the article

• MySQL Cluster ndb_mgmd error

  - by Patryk

  I set up MySQL Cluster on Ubuntu. My ndb_mgmd.cnf file looked: [NDBD DEFAULT] NoOfReplicas=2 DataDir= /var/lib/mysql-cluster # Management Node [NDB_MGMD] NodeId=1 HostName=192.168.204.20 DataDir=/var/lib/mysql-cluster # Storage Nodes (one for each node) [NDBD] NodeId=2 HostName=192.168.204.25 DataDir=/var/lib/mysql-cluster [NDBD] NodeId=3 HostName=192.168.204.26 DataDir=/var/lib/mysql-cluster # SQL Nodes (one for each node) [MYSQLD] NodeId=4 HostName=192.168.204.30 Now I want to edit this configuration, so I changed this file: [NDBD DEFAULT] NoOfReplicas=2 DataDir= /var/lib/mysql-cluster # Management Node [NDB_MGMD] NodeId=1 HostName=192.168.204.20 DataDir=/var/lib/mysql-cluster # Storage Nodes (one for each node) [NDBD] NodeId=2 HostName=192.168.204.25 DataDir=/var/lib/mysql-cluster [NDBD] NodeId=3 HostName=192.168.204.26 DataDir=/var/lib/mysql-cluster # SQL Nodes (one for each node) [MYSQLD] NodeId=4 HostName=192.168.204.25 [MYSQLD] NodeId=5 HostName=192.168.204.26 But ndb_mgm > show; still shows: Connected to Management Server at: localhost:1186 Cluster Configuration --------------------- [ndbd(NDB)] 2 node(s) id=2 (not connected, accepting connect from 192.168.204.25) id=3 (not connected, accepting connect from 192.168.204.26) [ndb_mgmd(MGM)] 1 node(s) id=1 @192.168.204.20 (mysql-5.1.51 ndb-7.1.9) [mysqld(API)] 1 node(s) id=4 (not connected, accepting connect from 192.168.204.30) I tried: sudo /etc/init.d/mysql-ndb-mgm restart sudo ndb_mgmd --initial sudo ndb_mgmd -f /etc/mysql/ndb_mgmd.cnf And nothing works. Any help?

  Read the article

• Rundeck get verbose output of command executing on node

  - by Leon Stafford

  I have Rundeck executing a remote script, which is in python is using print statements to return output normally such as: $ python mytest.py PASS: Condition 1 passed PASS: Condition 2 passed PASS: and so on... When I run this via Rundeck, however, it doesn't show me the same print generated outputs as above. In Rundeck's most detailed Debug output mode, I only receive the following: 06:31:12 Permanently added 'myremotenode.com' (RSA) to the list of known hosts. 06:31:12 SSH_MSG_NEWKEYS sent 06:31:12 SSH_MSG_NEWKEYS received 06:31:12 SSH_MSG_SERVICE_REQUEST sent 06:31:13 SSH_MSG_SERVICE_ACCEPT received 06:31:13 Authentications that can continue: publickey,password,keyboard-interactive 06:31:13 Next authentication method: publickey 06:31:13 Authentication succeeded (publickey). 06:31:13 /cygdrive/c/Program Files (x86)/Mozil... 06:32:06 Adding reference: ant.PropertyHelper 06:32:06 Setting project property: sshexec.output -> /cygdrive/c/Prog... I know that the remote script is actually executing just as usual, as I'm receiving other emails generated by the ~30min long script. Obviously, I don't want to have to wait 30mins to see the result of each print statement within the python script. How can I get the same level of output in Rundeck as I do in the bash shell directly?

  Read the article

• Why can't I see installed AIR applications in /Applications on Mac OS Lion?

  - by Damir Zekic

  Yesterday I did a clean install of Mac OS Lion, and installed bunch of apps, including HipChat Desktop Application (an Adobe AIR app). I used it for some time and eventually closed it. Today I wanted to start it again, but couldn't find it in Launchpad. I looked in /Applications folder, but I couldn't find it there either (I still don't have ~/Applications). I went back to HipChat website (from where I installed) and a Flash plugin allowed me to run the app immediately. It shows up in my Dock and if I "keep it" there, I can launch it again (it still doesn't appear in my /Applications dir). However, it asks me for confirmation about launching an app that has been downloaded from the Internet (every time I start it, it's annoying). I also see the app in Adobe AIR uninstaller. I then went to my old Snow Leopard installation and found HipChat in my /Applications folder there. Copied it to the Lion disk and it works. Now I have two HipChat entries in Adobe AIR uninstaller. I guess I solved the issue at hand, but I still don't understand where the original app is located and how I can access it and move it to Applications. I couldn't find it anywhere with both Finder search nor find command in terminal (I used $find / -name "HipChat*" -print). So, how does Adobe AIR store the installed applications (on OSX Lion) and is there any way to get them to show up in Launchpad?

  Read the article

• Ways to go about optimizing website performance WordPress, Amazon EC2 Apache and RDS MySQL

  - by fuzzybee

  I have 6 WordPress websites running on 1 single EC2 instance. All the the websites are connecting to databases in 1 same RDS instance. Earlier today, traffic to the largest website peaked and the RDS instance went bottle-neck - CPU utilization was 100% for over an hour. It affected all of my websites as it took them all forever to load. In order to prevent such issue from happening again, which of the following will matter most so that I invest time and effort in first of all? (I will work on all later, I just need to prioritise now) To improve caching for all websites To fine-tune the database server To fine-tune my Apache server What will be the effect on user experience for my websites? Some quick searches show that I should limit number of concurrent connections to my web server but wouldn't that prevent users from accessing my websites? More background: My largest website has 140k visits and 660k page views a month. The other 5 websites should add up much less than that. I'm using a large EC2 instance as the web server I'm using a medium RDS instance as the database server What I've already done: Use W3 Total Cache plugin for caching for most the websites, especially the largest one (I can barely anything else in terms of caching I could do for the largest website) Am I using my resources wastefully or is there simply not enough resources for my websites - or rather, how do I answer that question myself?

  Read the article

• Why is Xampp unable to start Apache?

  - by jribeiro

  I formatted my computer a week ago. Installed wampp on Windows XP, git and everything I needed. When I run git for the first time it told me it had a problem with my user folder (because of the accents) so I created a new user and migrated everything to the new one. After this, wampp wouldn't start anymore. I uninstalled it and installed xampp which is what I'm using now. My problem is that even though I requesed xampp to install Apache as a service it isn't installed. It doesn't show in Windows' services screen. Xampp control panel shows mysql service running OK. When I click to install Apache as a service it returns no error. When I click Start Apache no error is outputed. No file and no errors under c:/xampp/apache/log/ If I restart my computer it says that Apache service is not installed. I tried to reinstall wampp and the same problem occurs. If I run netstat -a -no nothing is running on port 80! What can I do?

  Read the article

• OS X Hard drive recovery

  - by Adam

  I am trying to recover data from a bad Seagate 1TB hard drive in a 2010 iMac. One day the iMac wouldn't boot (stuck at gray screen on startup). I removed the hard drive from the iMac and connected it to a MacBook using a 3.5" HDD to USB adapter. The hard drive wouldn't mount but it did display in Disk Utility that that there were 2 partitions on the disk. I tried to run Disk Warrior and it showed thousands of errors but still wouldn't mount. At this time the hard drive only show one partition in Disk Utility. Next I tried putting the hard drive in a desktop PC and running Spin Rite - which then gave me several division overflow errors (even with running Spin Rite with a newer version of DOS). The SMART status on the drive reports that the drive has had failures and HD Tune referenced the drive had once hit 59 degrees celsius. Disk Utility gives me the following message when running a pair: Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files. Overall, the hard drive spins up and sounds OK - there are no clicking noises but the hard drive won't mount and displays as a light gray "Macintosh HD" in disk utility. Any tips or advice on how to recover data on this drive would be GREATLY appreciated! Are there any other tools I can try before calling it quits on this drive? Thank you

  Read the article

• Enable Soap for PHP 5.5.x on CentOS 6.5

  - by Chris Mancini

  Unfortunately I have to support soap on my server for the Fedex webservice. I recompiled PHP enabling support and it works via CLI but not PHP-fpm. They both point to the same ini file and both show the module loaded, but only CLI shows the configuration values. Output of php -i | grep -i soap Configuration File (php.ini) Path => /usr/local/etc Loaded Configuration File => /usr/local/etc/php.ini Configure Command => './configure' '--prefix=/usr/local' '--with-config-file-path=/usr/local/etc' '--with-config-file-scan-dir=/usr/local/etc/php_user/' '--enable-fpm' '--enable-ftp' '--enable-libxml' '--enable-mbstring' '--enable-pdo' '--enable-soap' '--enable-sockets=shared' '--enable-zip' '--with-curl' '--with-fpm-group=nginx' '--with-fpm-user=nginx' '--with-freetype-dir=/usr/lib64/' '--with-gd' '--with-jpeg-dir=/usr/lib64/' '--with-libdir=lib64' '--with-mcrypt' '--with-openssl' '--with-pdo-mysql' '--with-pear' '--with-readline' '--with-tidy' '--with-xsl' '--with-zlib' '--without-pdo-sqlite' '--without-sqlite3' soap Soap Client => enabled Soap Server => enabled soap.wsdl_cache => 1 => 1 soap.wsdl_cache_dir => /tmp => /tmp soap.wsdl_cache_enabled => 1 => 1 soap.wsdl_cache_limit => 5 => 5 soap.wsdl_cache_ttl => 86400 => 86400 Output from php-fpm phpinfo(): Configuration File (php.ini) Path /usr/local/etc Loaded Configuration File /usr/local/etc/php.ini SOAP Brad Lafountain, Shane Caraveo, Dmitry Stogov Please help, I have tried so many things...

  Read the article

• [SOLVED] Single Sign On for intranet with Apache and Linux MIT Kerberos

  - by Beerdude26

  EDIT: SOLVED! See my answer below. Greetings, I am looking for a way to do a single sign on to an intranet in the following manner: A Linux user logs on via a graphical frontend (for example, GNOME). He automatically requests a TGT for his username from the MIT Kerberos KDC. Via some way or another, the Apache server (which we'll assume is on the same server as the KDC), is informed that this user has logged in. When the user accesses the intranet, he is automatically granted access to his web applications. I don't think I've seen this kind of functionality while searching the net. I know the following possibilities exist: Using an authentication module such as mod_auth_kerb, a user is presented with a login prompt to enter his username and password, which are then authenticated against the MIT Kerberos server. (I would like this to be automatic.) IIS supports integrated Windows logon via ASP.Net when the user is part of an Active Directory. (I'm looking for the Linux / Apache equivalent.) Any suggestions, criticism and ideas are highly appreciated. This is for a school project to show a proof-of-concept, so every handy piece of information is more than welcome. :)

  Read the article

• Pivot tables: How can I total the subtotal?

  - by Mike

  Person A needs £115, Person D £234 and Person G £789, but how do I SUM that and get it to show on the same ROW as the subtotal? The Rows are subscription names. The Value field holds the Cost per subscription. the Columns holds the name of the person who receives the subscription. I have GROUPED on YEAR & MONTH, and have a subtotal that shows me how much each person will need to pay each month for all their subscriptions, but I need a figure showing me the total of all the subscriptions per month. I've tried adding calculated fields, but I want to SUM the subtotals so I'm struggling to see the field I need to use. I've tried Grand Totals but that SUMS all rows and I really only want SUM the Subtotal Total Row. I need a nice neat report that my managers won't go white at when looking at it...to many numbers = fear and confusion. Anyway it got messy, so I've come for help. Cheers Mike.

  Read the article

• Windows 7 just deleted 4 days of work wtf!?

  - by Mat

  Hey! I'm just a bit about to freak out. I just finished a project and rebooted my computer. It didn't want to boot anymore so I had to use the windows 7 system repair option. it run for a minute and then booted up. Now most of my sourcecode from the last 4 days of work is gone! background: sometimes (most often after installing new software) my notebook won't boot up anymore. It will just show the little Win 7 flag, but not read from the harddisk anymore. If I hardabord and reboot then, it asks me whether to start windows normally (which won't work) or to run "windows startup repair". If i run it, it does some stuff for about two or three minutes and then I can boot windows again. Usually after this, .exe files i added to the computer during previous days are gone - but other files so far were not touched. But now, after this happened, a whole bunch of ".as" (ActionScript source files) from my project are gone!! does anyone know where and whether there's a way to recover them?? please help! Thank you!

  Read the article

• How to monitor changes in the frequency of network latency spikes over time?

  - by dequis

  I'm currently trying to troubleshoot an issue with my network in which I get latency spikes up to 200 seconds (normally around 50 secs) in an apparently random way at apparently random moments of the day. While trying to find what part of my messy network needs to be blamed (outside of the scope of this question - discussed a bit on chat), I realized I have no reliable way to confirm that a change actually improved anything. So far, the main way in which i notice this is that irssi shows [Lag: 15 (??)] in the statusbar, increasing every 5 seconds, and all other connections seem to be affected too. Since this depends on my observations, it's not a very reliable method to know how often it really happens. Note that just sending ICMP pings is probably not enough, but that's just my guess. It might be a "bufferbloat" issue, it might be packet loss, it might only apply to persistent connections. I suspect this because a few months ago, when the issue started, I had a "ping" command running in background and it didn't show anything weird at all during the latency spikes. This seems to have changed now (pings don't go through), but still, I'd prefer something more robust.

  Read the article

• vCenter 5.1 SSO Configuration option not available in Web Client?

  - by goober

  Problem I just finished separately installing vCenter Server 5.1. I installed the components separately but on the same machine using a local SQL 2008 R2 DB (not SQL express). Everything appears to be working correctly with the exception of SSO. It doesn't find the AD server. This is to be expected (see below) but I don't know how to fix it. Potential Leads / Steps taken During the install of SSO, I was logged on as a local administrator (waiting on central IT dept to create a service account). As a result, I received a message saying that SSO wouldn't be able to automatically locate the AD. (fair eonugh) After I read up on it a little bit, I believed I could go into the SSO Configuration option in the Web client, like so: However, what I actually see is: I also notice that the "SSO Users and Groups" entry is not there. Betting that has something to do with it as well. Question How can I get the "Configure" Option to show up for SSO? Overall goal: How can I manually enter the AD server in this scenario while logged in as a local administrator? References VMWare vCenter 5.1 Installation: Part 9 (Optional SSO Configuration) [Derek Seaman's Blog] (used the image of correct configuration menu)

  Read the article

• some windows 8 metro (modern UI) apps don't open, but live tiles DO work

  - by DiegoDD

  Some of my default windows 8 metro (modern UI) apps don't work properly, the apps are the Weather and the News apps. when I open them, I only get the loading screen, that is, the big colorful screen with the logo in the center, and the "loading" spinning dots. They just keep like that forever and never actually open. There are no error messages or anything. The strange this is that the live tiles for those apps DO work and show current information. current weather for my location (saved before they started failing) and current news. Both apps did work well in the past, and every other default windows 8 app I've tried work well (both live tiles and the app itself). Every other non-default apps that I've downloaded still work correctly, so the problem so far is only with those two apps. (weather and news). I really don't know since when exactly they started to fail because I really don't use them (or any metro app) that often, so I can't recall if I did something like installing some other app, either metro or regular, or messed with some drivers, etc. they simply don't open now, but they DID work before. any ideas?

  Read the article

< Previous Page | 681 682 683 684 685 686 687 688 689 690 691 692  | Next Page >