Search Results

Search found 19425 results on 777 pages for 'output clause'.

Page 686/777 | < Previous Page | 682 683 684 685 686 687 688 689 690 691 692 693  | Next Page >

• How do I fix my resolution after Directx install through Steam?

  - by Justin

  I'm a bit long-winded so see bottom for quick version and specs. Friendly Hello: Hello all on these askUbuntu pages, I just recently built my own computer and decided to switch to Ubuntu for the extra coolness. I've been learning a lot through all this, and mostly been trying to figure out issues on my own (read: Google searches). However, I couldn't seem to find others with this problem so I've come here for help. Detailed Recount: So I just used WINE and WINETRICKS to install Steam. All went well and it worked. Then I went to trying a game out. I remembered that Orcs Must Die! worked from http://www.steamgamesonlinux.com/ so I tried that out. After selecting to download it, that's when the problem occurred. The screen suddenly zoomed in!!! I think it's the resolution right? Half the screen is cut off and I can't see parts of the right side of windows. My theory is that this is due to Direct X being installed through Steam, as Steam automatically installed it as I chose to download the game. It didn't even ask me to install Direct X or not ): It all happened so fast. This all being said, the game works fine! It looks a little strange, as if the resolution was off, but it plays just fine. What I did so far: Restarted my computer. Didn't work -_- Researched Steam installing DirectX on Ubuntu then messing up resolution and couldn't really find anything. Researched uninstalling DirectX from Ubuntu but only found uninstalling DirectX after having been installed with Wine, not through Steam. Got mad and ate my feelings. Tried "xrandr -s 0" but it didn't do anything. Ran xrandr alone and terminal showed this: Screen 0: minimum 8 x 8, current 640 x 480, maximum 16384 x 16384 DVI-I-0 connected 640x480+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 640x480 59.9*+ 320x240 120.1 DVI-I-1 disconnected (normal left inverted right x axis y axis) HDMI-0 disconnected (normal left inverted right x axis y axis) DP-0 disconnected (normal left inverted right x axis y axis) DVI-D-0 disconnected (normal left inverted right x axis y axis) DP-1 disconnected (normal left inverted right x axis y axis) About now I was mad so I played Odin's Sphere then took a nap. Back to it! I entered the following: xrandr --output DVI-I-0 --mode 1024x768 But I was met with this message: xrandr: cannot find mode 1024x768 I get the same messages for 800x600, 1400x1050, and seemingly any other combination of numbers. I then tried Going into System Settings then Displays, then playing around in there. My Resolution is set to 640x480 and there are no other options for me to choose from. Rotation has Normal, Clockwise, Counter Clockwise, and 180 Degrees. It's set to Normal and I haven't messed with that. Launcher Placement has Unknown and All Displays as its two options. It's set to Unknown, but moving it to All Displays doesn't seem to do anything. Finally, when I click Detect Displays, nothing seems to happen. Quick Version: Linux noob. Steam installed with Wine and Winetricks. Steam downloaded and installed game + DirectX. Resolution messed up now (I think; pretty sure), can't fix it, very annoying, no idea what's going on, halp! Specs: Ubuntu Version 12.04 Wine Version 1.4.1 Have not changed any settings in Wine Using Winetricks Graphics Card: http://www.gigabyte.com/products/pro...px?pid=4361#sp Drivers: Proprietary (Installing those were a LOT of fun) Also let it be known that I have a DVI to VGA cord running from my Graphics card to my monitor. If any more information is needed I am ready to report. Thank You: Thanks a lot for your help and all the work you do to support noob ubuntuers like me (:

  Read the article

• Beginner Geek: Scan a Document or Picture in Windows 7

  - by Mysticgeek

  There may come a time when you want to digitize your priceless old pictures, or need to scan a receipts and documents for your company. Today we look at how to scan a picture or document in Windows 7. Scanning Your Document In this example we’re using an HP PSC 1500 All-In-One printer connected to a Windows 7 Home Premium 32-bit system. Different scanners will vary, however the process is essentially the same. The scanning process has changed a bit since the XP days. To scan a document in Windows 7, place the document or picture in the scanner, click on Start, and go to Devices and Printers.   When the Devices and Printers window opens, find your scanning device and double-click on it to get the manufacturers Printer Actions menu. For our HP PSC 1500 we have a few different options like printing, device setup, and scanner actions. Here we’ll click on the Scan a document or photo hyperlink. The New Scan window opens and from here you can adjust the quality of the scanned image and choose the output file type. Then click the Preview button to get an idea of what the image will look like.   If you’re not happy with the preview, then you can go back and make any adjustments to the quality of the document or photo. Once everything looks good, click on the Scan button. The scanning process will start. The amount of time it takes will depend on your scanner type, and the quality of the settings you choose. The higher the quality…the more time it will take. You will have the option to tag the picture if you want to… Now you can view your scanned document or photo inside Windows Photo Viewer. If you’re happy with the look of the document, you can send it off in an email, put it on an network drive, FTP it… whatever you need to do with it. Another method is to place the document of photo you wish to scan in the scanner, open up Devices and Printers, then right-click on the scanning device and select Start Scan from the context menu. This should bypass the manufacturer screen and go directly into the New Scan window, where you can start the scan process. From the Context Menu you can also choose Scan Properties. This will allow you to test the scanner if you’re having problems with it and change some of its settings. Or you can choose Scan Profiles which allows you to use pre-selected settings, create your own, or set one as the default. Although scanning documents and photos isn’t a common occurrence as it was a few years ago, Windows 7 still includes the feature. When you need to scan a document or photo in Windows 7, this should get you started. Similar Articles Productive Geek Tips Easily Rotate Pictures In Word 2007Beginner Geek: Delete User Accounts in Windows 7Customize Your Welcome Picture Choices in Windows VistaSecure Computing: Detect and Eliminate Malware Using Windows DefenderMark Your Document As Final in Word 2007 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Creating a Password Reset Disk in Windows Bypass Waiting Time On Customer Service Calls With Lucyphone MELTUP – "The Beginning Of US Currency Crisis And Hyperinflation" Enable or Disable the Task Manager Using TaskMgrED Explorer++ is a Worthy Windows Explorer Alternative Error Goblin Explains Windows Error Codes

  Read the article

• Juju stuck in "pending" state when using LXC

  - by Andre

  So I'm trying to get started with Juju, and tried to do this locally using LXC. I followed the instructions here: How do I configure juju for local usage? Unfortunately this doesn't seem to work for me. status shows the following: $ juju status machines: 0: agent-state: running dns-name: localhost instance-id: local instance-state: running services: mysql: charm: cs:precise/mysql-1 relations: db: - wordpress units: mysql/0: agent-state: pending machine: 0 public-address: null wordpress: charm: cs:precise/wordpress-0 exposed: true relations: db: - mysql units: wordpress/0: agent-state: pending machine: 0 open-ports: [] public-address: null 2012-05-10 14:09:38,155 INFO 'status' command finished successfully As you can see the agent-state is 'pending' and there is no public address where I'm able to access the newly created site. Am I missing something here? UPDATE: Tried destroying the environment an doing everything again (multiple times). This is the output for debug-log: ~$ juju debug-log 2012-05-11 08:50:23,790 INFO Enabling distributed debug log. 2012-05-11 08:50:23,806 INFO Tailing logs - Ctrl-C to stop. 2012-05-11 08:50:42,338 Machine:0: juju.agents.machine DEBUG: Units changed old:set([]) new:set(['mysql/0']) 2012-05-11 08:50:42,339 Machine:0: juju.agents.machine DEBUG: Starting service unit: mysql/0 ... 2012-05-11 08:50:42,459 Machine:0: unit.deploy DEBUG: Downloading charm cs:precise/mysql-1 to /home/andre/.juju/data/andre-local/charms 2012-05-11 08:50:42,620 Machine:0: unit.deploy DEBUG: Using <juju.machine.unit.UnitContainerDeployment object at 0x9c54b6c> for mysql/0 in /home/andre/.juju/data/andre-local 2012-05-11 08:50:42,648 Machine:0: unit.deploy DEBUG: Starting service unit mysql/0... 2012-05-11 08:50:42,649 Machine:0: unit.deploy DEBUG: Creating master container... 2012-05-11 08:54:33,992 Machine:0: unit.deploy DEBUG: Created master container andre-local-0-template 2012-05-11 08:54:33,993 Machine:0: unit.deploy INFO: Creating container mysql-0... 2012-05-11 08:56:18,760 Machine:0: unit.deploy INFO: Container created for mysql/0 2012-05-11 08:56:19,466 Machine:0: unit.deploy DEBUG: Charm extracted into container 2012-05-11 08:56:19,569 Machine:0: unit.deploy DEBUG: Starting container... 2012-05-11 08:56:22,707 Machine:0: unit.deploy INFO: Started container for mysql/0 2012-05-11 08:56:22,707 Machine:0: unit.deploy INFO: Started service unit mysql/0 2012-05-11 08:56:23,012 Machine:0: juju.agents.machine DEBUG: Units changed old:set(['mysql/0']) new:set(['wordpress/0', 'mysql/0']) 2012-05-11 08:56:23,039 Machine:0: juju.agents.machine DEBUG: Starting service unit: wordpress/0 ... 2012-05-11 08:56:23,154 Machine:0: unit.deploy DEBUG: Downloading charm cs:precise/wordpress-0 to /home/andre/.juju/data/andre-local/charms 2012-05-11 08:56:23,396 Machine:0: unit.deploy DEBUG: Using <juju.machine.unit.UnitContainerDeployment object at 0x9c519cc> for wordpress/0 in /home/andre/.juju/data/andre-local 2012-05-11 08:56:23,620 Machine:0: unit.deploy DEBUG: Starting service unit wordpress/0... 2012-05-11 08:56:23,621 Machine:0: unit.deploy INFO: Creating container wordpress-0... 2012-05-11 08:58:24,739 Machine:0: unit.deploy INFO: Container created for wordpress/0 2012-05-11 08:58:25,163 Machine:0: unit.deploy DEBUG: Charm extracted into container 2012-05-11 08:58:25,397 Machine:0: unit.deploy DEBUG: Starting container... 2012-05-11 08:58:27,982 Machine:0: unit.deploy INFO: Started container for wordpress/0 2012-05-11 08:58:27,983 Machine:0: unit.deploy INFO: Started service unit wordpress/0 This is the result for the status command (with verbose flag): ~$ juju -v status 2012-05-11 08:51:53,464 DEBUG Initializing juju status runtime 2012-05-11 08:51:53,625:4030(0xb7345b00):ZOO_INFO@log_env@658: Client environment:zookeeper.version=zookeeper C client 3.3.5 2012-05-11 08:51:53,625:4030(0xb7345b00):ZOO_INFO@log_env@662: Client environment:host.name=andre-ufo 2012-05-11 08:51:53,625:4030(0xb7345b00):ZOO_INFO@log_env@669: Client environment:os.name=Linux 2012-05-11 08:51:53,625:4030(0xb7345b00):ZOO_INFO@log_env@670: Client environment:os.arch=3.2.0-24-generic-pae 2012-05-11 08:51:53,625:4030(0xb7345b00):ZOO_INFO@log_env@671: Client environment:os.version=#37-Ubuntu SMP Wed Apr 25 10:47:59 UTC 2012 2012-05-11 08:51:53,626:4030(0xb7345b00):ZOO_INFO@log_env@679: Client environment:user.name=andre 2012-05-11 08:51:53,626:4030(0xb7345b00):ZOO_INFO@log_env@687: Client environment:user.home=/home/andre 2012-05-11 08:51:53,626:4030(0xb7345b00):ZOO_INFO@log_env@699: Client environment:user.dir=/home/andre 2012-05-11 08:51:53,626:4030(0xb7345b00):ZOO_INFO@zookeeper_init@727: Initiating client connection, host=192.168.122.1:41779 sessionTimeout=10000 watcher=0xb7780620 sessionId=0 sessionPasswd=<null> context=0x9242ee8 flags=0 2012-05-11 08:51:53,627:4030(0xb6b90b40):ZOO_INFO@check_events@1585: initiated connection to server [192.168.122.1:41779] 2012-05-11 08:51:53,649:4030(0xb6b90b40):ZOO_INFO@check_events@1632: session establishment complete on server [192.168.122.1:41779], sessionId=0x1373ae057d90007, negotiated timeout=10000 2012-05-11 08:51:53,651 DEBUG Environment is initialized. machines: 0: agent-state: running dns-name: localhost instance-id: local instance-state: running services: mysql: charm: cs:precise/mysql-1 relations: db: - wordpress units: mysql/0: agent-state: pending machine: 0 public-address: null wordpress: charm: cs:precise/wordpress-0 relations: db: - mysql units: wordpress/0: agent-state: pending machine: 0 public-address: null

  Read the article

• Unable to build my c++ code with g++ 4.6.3

  - by Mriganka

  I am facing multiple issues with building my c++ code on Ubuntu 12.04. This code was building and running fine on RH Enterprise. I am using g++ 4.6.3. Here's the output of g++ -v. g++ -v Using built-in specs. COLLECT_GCC=g++ COLLECT_LTO_WRAPPER=/usr/lib/gcc/i686-linux-gnu/4.6/lto-wrapper Target: i686-linux-gnu Configured with: ../src/configure -v --with-pkgversion='Ubuntu/Linaro 4.6.3-1ubuntu5' --with-bugurl=file:///usr/share/doc/gcc-4.6/README.Bugs --enable-languages=c,c++,fortran,objc,obj-c++ --prefix=/usr --program-suffix=-4.6 --enable-shared --enable-linker-build-id --with-system-zlib --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --with-gxx-include-dir=/usr/include/c++/4.6 --libdir=/usr/lib --enable-nls --with-sysroot=/ --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-gnu-unique-object --enable-plugin --enable-objc-gc --enable-targets=all --disable-werror --with-arch-32=i686 --with-tune=generic --enable-checking=release --build=i686-linux-gnu --host=i686-linux-gnu --target=i686-linux-gnu Thread model: posix gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) Here's a sample of my code: #include "Word.h" #include < string> using namespace std; pthread_mutex_t Word::_lock = PTHREAD_MUTEX_INITIALIZER; Word::Word(): _occurrences(1) { memset(_buf, 0, 25); } Word::Word(char *str): _occurrences(1) { memset(_buf, 0, 25); if (str != NULL) { strncpy(_buf, str, strlen(str)); } } g++ -c -ansi or g++ -c -std=c++98 or g++ -c -std=c++03, none of these options are able to build the code correctly. I get the following compilation errors: mriganka@ubuntu:~/WordCount$ make g++ -c -g -ansi Word.cpp -o Word.o Word.cpp: In constructor ‘Word::Word()’: Word.cpp:10:21: error: ‘memset’ was not declared in this scope Word.cpp: In constructor ‘Word::Word(char*)’: Word.cpp:16:21: error: ‘memset’ was not declared in this scope Word.cpp:19:34: error: ‘strlen’ was not declared in this scope Word.cpp:19:35: error: ‘strncpy’ was not declared in this scope Word.cpp: In member function ‘void Word::operator=(const Word&)’: Word.cpp:37:42: error: ‘strlen’ was not declared in this scope Word.cpp:37:43: error: ‘strncpy’ was not declared in this scope Word.cpp: In copy constructor ‘Word::Word(const Word&)’: Word.cpp:44:21: error: ‘memset’ was not declared in this scope Word.cpp:45:52: error: ‘strlen’ was not declared in this scope Word.cpp:45:53: error: ‘strncpy’ was not declared in this scope So basically g++ 4.6.3 on Ubuntu 12.04 is not able to recognize the standard c++ headers. And I am not finding a way out of this situation. Second problem: In order to make progress, I included < string.h instead of < string. But now I am facing linking errors with my message queue and pthread library functions. Here's the error that I am getting: mriganka@ubuntu:~/WordCount$ make g++ -c -g -ansi Word.cpp -o Word.o g++ -lrt -I/usr/lib/i386-linux-gnu Word.o HashMap.o main.o -o word_count main.o: In function `main': /home/mriganka/WordCount/main.cpp:75: undefined reference to `pthread_create' /home/mriganka/WordCount/main.cpp:90: undefined reference to `mq_open' /home/mriganka/WordCount/main.cpp:93: undefined reference to `mq_getattr' /home/mriganka/WordCount/main.cpp:113: undefined reference to `mq_send' /home/mriganka/WordCount/main.cpp:123: undefined reference to `pthread_join' /home/mriganka/WordCount/main.cpp:129: undefined reference to `mq_close' /home/mriganka/WordCount/main.cpp:130: undefined reference to `mq_unlink' main.o: In function `count_words(void*)': /home/mriganka/WordCount/main.cpp:151: undefined reference to `mq_open' /home/mriganka/WordCount/main.cpp:154: undefined reference to `mq_getattr' /home/mriganka/WordCount/main.cpp:162: undefined reference to `mq_timedreceive' collect2: ld returned 1 exit status Here's my makefile: CC=g++ CFLAGS=-c -g -ansi LDFLAGS=-lrt INC=-I/usr/lib/i386-linux-gnu SOURCES=Word.cpp HashMap.cpp main.cpp OBJECTS=$(SOURCES:.cpp=.o) EXECUTABLE=word_count all: $(SOURCES) $(EXECUTABLE) $(EXECUTABLE): $(OBJECTS) $(CC) $(LDFLAGS) $(INC) -pthread $(OBJECTS) -o $@ .cpp.o: $(CC) $(CFLAGS) $< -o $@ clean: rm -f *.o word_count Please help me to resolve both the issues. I searched online relentlessly for any solution of these problems, but no one seems to have encountered these issues.

  Read the article

• Another sound not working post

  - by Thomas Smart

  Tried all the other "sound not working" posts i think, lost count. purge/reinstall alsa and pulse, reboot, add user to audio group, various lines in the alsa config file such as "options snd-hda-intel model=" then tried different options like generic, auto, basic, default, etc. tried pulseaudio -k && sudo alsa force-reload a few times, with and without rebooting. Hardware: 16gb ram, core I7-4790, Intel Haswell mboard with onboard sound and graphics Multimedia: Audio Adapter: HDA-Intel-HDA Intel HDMI OS: Ubuntu server 14.04 with ubuntu-desktop installed. GUI sound settings lists only the dummy sound card alsamixer -c 0 ¦ Card: HDA Intel HDMI F1: Help ¦ ¦ Chip: Intel Haswell HDMI F2: System information ¦ ¦ View: F3:[Playback] F4: Capture F5: All F6: Select sound card ¦ ¦ Item: S/PDIF ¦ ¦ +--+ ¦ ¦ ¦OO¦ ¦ ¦ +--+ ¦ ¦ < S/PDIF > ¦ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: HDMI [HDA Intel HDMI], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 aplay -L default Playback/recording through the PulseAudio sound server null Discard all samples (playback) or generate zero samples (capture) pulse PulseAudio Sound Server hdmi:CARD=HDMI,DEV=0 HDA Intel HDMI, HDMI 0 HDMI Audio Output dmix:CARD=HDMI,DEV=3 HDA Intel HDMI, HDMI 0 Direct sample mixing device dsnoop:CARD=HDMI,DEV=3 HDA Intel HDMI, HDMI 0 Direct sample snooping device hw:CARD=HDMI,DEV=3 HDA Intel HDMI, HDMI 0 Direct hardware device without any conversions plughw:CARD=HDMI,DEV=3 HDA Intel HDMI, HDMI 0 Hardware device with all software conversions cat /proc/asound/cards 0 [HDMI ]: HDA-Intel - HDA Intel HDMI HDA Intel HDMI at 0xf7d14000 irq 46 cat /proc/asound/devices 1: : sequencer 2: [ 0- 3]: digital audio playback 3: [ 0- 0]: hardware dependent 4: [ 0] : control 33: : timer mplayer -ao alsa:device=hdmi /usr/share/sounds/ubuntu/stereo/system-ready.ogg MPlayer 1.1-4.8 (C) 2000-2012 MPlayer Team mplayer: could not connect to socket mplayer: No such file or directory Failed to open LIRC support. You will not be able to use your remote control. Playing /usr/share/sounds/ubuntu/stereo/system-ready.ogg. libavformat version 54.20.4 (external) Mismatching header version 54.20.3 libavformat file format detected. [lavf] stream 0: audio (vorbis), -aid 0 Load subtitles in /usr/share/sounds/ubuntu/stereo/ ========================================================================== Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders libavcodec version 54.35.0 (external) AUDIO: 44100 Hz, 1 ch, floatle, 80.0 kbit/5.67% (ratio: 10000->176400) Selected audio codec: [ffvorbis] afm: ffmpeg (FFmpeg Vorbis) ========================================================================== [AO_ALSA] alsa-lib: confmisc.c:768:(parse_card) cannot find card '1' [AO_ALSA] alsa-lib: conf.c:4248:(_snd_config_evaluate) function snd_func_card_driver returned error: No such file or directory [AO_ALSA] alsa-lib: confmisc.c:392:(snd_func_concat) error evaluating strings [AO_ALSA] alsa-lib: conf.c:4248:(_snd_config_evaluate) function snd_func_concat returned error: No such file or directory [AO_ALSA] alsa-lib: confmisc.c:1251:(snd_func_refer) error evaluating name [AO_ALSA] alsa-lib: conf.c:4248:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory [AO_ALSA] alsa-lib: conf.c:4727:(snd_config_expand) Evaluate error: No such file or directory [AO_ALSA] alsa-lib: pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM hdmi [AO_ALSA] Playback open error: No such file or directory Failed to initialize audio driver 'alsa:device=hdmi' Could not open/initialize audio device -> no sound. Audio: no sound Video: no video Exiting... (End of file) mplayer -ao alsa:device=hw=0.3 /usr/share/sounds/ubuntu/stereo/system-ready.ogg MPlayer 1.1-4.8 (C) 2000-2012 MPlayer Team mplayer: could not connect to socket mplayer: No such file or directory Failed to open LIRC support. You will not be able to use your remote control. Playing /usr/share/sounds/ubuntu/stereo/system-ready.ogg. libavformat version 54.20.4 (external) Mismatching header version 54.20.3 libavformat file format detected. [lavf] stream 0: audio (vorbis), -aid 0 Load subtitles in /usr/share/sounds/ubuntu/stereo/ ========================================================================== Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders libavcodec version 54.35.0 (external) AUDIO: 44100 Hz, 1 ch, floatle, 80.0 kbit/5.67% (ratio: 10000->176400) Selected audio codec: [ffvorbis] afm: ffmpeg (FFmpeg Vorbis) ========================================================================== [AO_ALSA] Format floatle is not supported by hardware, trying default. AO: [alsa] 44100Hz 2ch s16le (2 bytes per sample) Video: no video Starting playback... A: 0.4 (00.4) of 0.8 (00.7) 0.1% Exiting... (End of file) Thank you for your time and help :)

  Read the article

• Logging WebSocket Frames using Chrome Developer Tools, Net-internals and Wireshark (TOTD #184)

  - by arungupta

  TOTD #183 explained how to build a WebSocket-driven application using GlassFish 4. This Tip Of The Day (TOTD) will explain how do view/debug on-the-wire messages, or frames as they are called in WebSocket parlance, over this upgraded connection. This blog will use the application built in TOTD #183. First of all, make sure you are using a browser that supports WebSocket. If you recall from TOTD #183 then WebSocket is combination of Protocol and JavaScript API. A browser supporting WebSocket, or not, means they understand your web pages with the WebSocket JavaScript. caniuse.com/websockets provide a current status of WebSocket support in different browsers. Most of the major browsers such as Chrome, Firefox, Safari already support WebSocket for the past few versions. As of this writing, IE still does not support WebSocket however its planned for a future release. Viewing WebSocket farmes require special settings because all the communication happens over an upgraded HTTP connection over a single TCP connection. If you are building your application using Java, then there are two common ways to debug WebSocket messages today. Other language libraries provide different mechanisms to log the messages. Lets get started! Chrome Developer Tools provide information about the initial handshake only. This can be viewed in the Network tab and selecting the endpoint hosting the WebSocket endpoint. You can also click on "WebSockets" on the bottom-right to show only the WebSocket endpoints. Click on "Frames" in the right panel to view the actual frames being exchanged between the client and server. The frames are not refreshed when new messages are sent or received. You need to refresh the panel by clicking on the endpoint again. To see more detailed information about the WebSocket frames, you need to type "chrome://net-internals" in a new tab. Click on "Sockets" in the left navigation bar and then on "View live sockets" to see the page. Select the box with the address to your WebSocket endpoint and see some basic information about connection and bytes exchanged between the client and the endpoint. Clicking on the blue text "source dependency ..." shows more details about the handshake. If you are interested in viewing the exact payload of WebSocket messages then you need a network sniffer. These tools are used to snoop network traffic and provide a lot more details about the raw messages exchanged over the network. However because they provide lot more information so they need to be configured in order to view the relevant information. Wireshark (nee Ethereal) is a pretty standard tool for sniffing network traffic and will be used here. For this blog purpose, we'll assume that the WebSocket endpoint is hosted on the local machine. These tools do allow to sniff traffic across the network though. Wireshark is quite a comprehensive tool and we'll capture traffic on the loopback address. Start wireshark, select "loopback" and click on "Start". By default, all traffic information on the loopback address is displayed. That includes tons of TCP protocol messages, applications running on your local machines (like GlassFish or Dropbox on mine), and many others. Specify "http" as the filter in the top-left. Invoke the application built in TOTD #183 and click on "Say Hello" button once. The output in wireshark looks like Here is a description of the messages exchanged: Message #4: Initial HTTP request of the JSP page Message #6: Response returning the JSP page Message #16: HTTP Upgrade request Message #18: Upgrade request accepted Message #20: Request favicon Message #22: Responding with favicon not found Message #24: Browser making a WebSocket request to the endpoint Message #26: WebSocket endpoint responding back You can also use Fiddler to debug your WebSocket messages. How are you viewing your WebSocket messages ? Here are some references for you: JSR 356: Java API for WebSocket - Specification (Early Draft) and Implementation (already integrated in GlassFish 4 promoted builds) TOTD #183 - Getting Started with WebSocket in GlassFish Subsequent blogs will discuss the following topics (not necessary in that order) ... Binary data as payload Custom payloads using encoder/decoder Error handling Interface-driven WebSocket endpoint Java client API Client and Server configuration Security Subprotocols Extensions Other topics from the API

  Read the article

• Hello World - My Name is Christian Finn and I'm a WebCenter Evangelist

  - by Michael Snow

  12.00 Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Cambria","serif"; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin;}  Good Morning World! I'd like to introduce a new member of the Oracle WebCenter Team, Christian Finn. We decided to let him do his own intros today. Look for his guest posts next week and he'll be a frequent contributor to WebCenter blog and voice of the community. Hello (Oracle) World! Hi everyone, my name is Christian Finn. It’s a coder’s tradition to have “hello world” be the first output from a new program or in a new language. While I have left my coding days far behind, it still seems fitting to start my new role here at Oracle by saying hello to all of you—our customers, partners and my colleagues. So by way of introduction, a little background about me. I am the new senior director for evangelism on the WebCenter product management team. Not only am I new to Oracle, but the evangelism team is also brand new. Our mission is to raise the profile of Oracle in all of the markets/conversations in which WebCenter competes—social business, collaboration, portals, Internet sites, and customer/audience engagement. This is all pretty familiar turf for me because, as some of you may know, until recently I was the director of product management at Microsoft for Microsoft SharePoint Server and several other SharePoint products. And prior to that, I held management roles at Microsoft in marketing, channels, learning, and enterprise sales. Before Microsoft, I got my start in the industry as a software trainer and Lotus Notes consultant. I am incredibly excited to be joining Oracle at this time because of the tremendous opportunity that lies ahead to improve how people and businesses work. Of all the vendors offering a vision for social business, Oracle is unique in having best of breed strength in market (or coming soon) in all three critical areas: customer experience management; the middleware and back-end applications that run your business; and in the social, collaboration, and content technologies that are the connective tissue between them. Everyone else can offer one or two of the above, but not all three unified together. So it is a great time to come board and there’s a fantastic team of people hard at work on building great products for you. In the coming weeks and months you’ll be hearing much more from us. For now, we’ll kick things off with some blog posts here on the WebCenter blog. Enjoy the reads and please share your thoughts with me over Twitter on @cfinn.

  Read the article

• It’s the thought that counts…

  - by Tony Davis

  I recently finished editing a book called Tribal SQL, and it was a fantastic experience. It’s a community-sourced book written by first-timers. Fifteen previously unpublished authors contributed one chapter each, with the seemingly simple remit to write about “what makes them passionate about working with SQL Server, something that all SQL Server DBAs and developers really need to know”. Sure, some of the writing skills were a bit rusty as one would expect from busy people, but the ideas and energy were sheer nectar. Any seasoned editor can deal easily with the problem of fixing the output of untrained writers. We can handle with the occasional technical error too, which is why we have technical reviewers. The editor’s real job is to hone the clarity and flow of ideas, making the author’s knowledge and experience accessible to as many others as possible. What the writer needs to bring, on the other hand, is enthusiasm, attention to detail, common sense, and a sense of the person behind the writing. If any of these are missing, no editor can fix it. We can see these essential characteristics in many of the more seasoned and widely-published writers about SQL. To illustrate what I mean by enthusiasm, or passion, take a look at the work of Laerte Junior or Fabiano Amorim. Both authors have English as a second language, but their energy, enthusiasm, sheer immersion in a technology and thirst to know more, drives them, with a little editorial help, to produce articles of far more practical value than one can find in the “manuals”. There’s the attention to detail of the likes of Jonathan Kehayias, or Paul Randal. Read their work and one begins to understand the knowledge coupled with incredible rigor, the willingness to bend and test every piece of advice offered to make sure it’s correct, that marks out the very best technical writing. There’s the common sense of someone like Louis Davidson. All writers, including Louis, like to stretch the grey matter of their readers, but some of the most valuable writing is that which takes a complicated idea, or distils years of experience, and expresses it in a way that sounds like simple common sense. There’s personality and humor. Contrary to what you may have been told, they can and do mix well with technical writing, as long as they don’t become a distraction. Read someone like Rodney Landrum, or Phil Factor, for numerous examples of articles that teach hard technical lessons but also make you smile at least twice along the way. Writing well is not easy and it takes a certain bravery to expose your ideas and knowledge for dissection by others, but it doesn’t mean that writing should be the preserve only of those trained in the art, or best left to the MVPs. I believe that Tribal SQL is testament to the fact that if you have passion for what you do, and really know your topic then, with a little editorial help, you can write, and people will learn from what you have to say. You can read a sample chapter, by Mark Rasmussen, in this issue of Simple-Talk and I hope you’ll consider checking out the book (if you needed any further encouragement, it’s also for a good cause, Computers4Africa). Cheers, Tony  

  Read the article

• SQL 2005 Transaction Rollback Hung–unresolved deadlock

  - by steveh99999

  Encountered an interesting issue recently with a SQL 2005 sp3 Enterprise Edition system. Every weekend, a full database reindex was being run on this system – normally this took around one and a half hours. Then, one weekend, the job ran for over 17 hours  - and had yet to complete... At this point, DBA cancelled the job. Job status is now cancelled – issue over…   However, cancelling the job had not killed the reindex transaction – DBCC OPENTRAN was still showing the transaction being open. The oldest open transaction in the database was now over 17 hours old.  Consequently, transaction log % used growing dramatically and locks still being held in the database... Further attempts to kill the transaction did nothing. ie we had a transaction which could not be killed. In sysprocesses, it was apparent the SPID was in rollback status, but the spid was not accumulating CPU or IO. Was the SPID stuck ? On examination of the SQL errorlog – shortly after the reindex had started, a whole bunch of deadlock output had been produced by trace flag 1222. Then this :- spid5s      ***Stack Dump being sent to   xxxxxxx\SQLDump0042.txt spid5s      * ******************************************************************************* spid5s      * spid5s      * BEGIN STACK DUMP: spid5s      *   12/05/10 01:04:47 spid 5 spid5s      * spid5s      * Unresolved deadlock spid5s      * spid5s      *   spid5s      * ******************************************************************************* spid5s      * ------------------------------------------------------------------------------- spid5s      * Short Stack Dump spid5s      Stack Signature for the dump is 0x000001D7 spid5s      External dump process return code 0x20000001. Unresolved deadlock – don’t think I’ve ever seen one of these before…. A quick call to Microsoft support confirmed the following bug had been hit :- http://support.microsoft.com/kb/961479 So, only option to get rid of the hung spid – to restart SQL Server… Fortunately SQL Server restarted without any issues. I was pleasantly surprised to see that recovery on this particular database was fast. However, restarting SQL Server to fix an issue is not something I would normally rush to do... Short term fix – the reindex was changed to use MAXDOP of 1. Longer term fix will be to apply the correct CU, or wait for SQL 2005 sp 4 ?? This should be released any day soon I hope..

  Read the article

• libreoffice-base not configured yet

  - by Wicky

  I have the LibreOffice ppa installed (ppa:libreoffice/ppa) and today I had a problem after updating. I got the following error. Reading package lists ... Done Building dependency tree Reading state information ... Ready You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies: libreoffice-base: Depends: libreoffice-base-core (= 1: 4.3.0-0ubuntu1 ~ precise1) but 4.3.0-3ubuntu1 ~ precise1 is installed Depends: libreoffice-base-drivers (= 1: 4.3.0-0ubuntu1 ~ precise1) but 4.3.0-3ubuntu1 ~ precise1 is installed Depends: libreoffice-core (= 1: 4.3.0-0ubuntu1 ~ precise1) but 4.3.0-3ubuntu1 ~ precise1 is installed libreoffice-core: Breaks: libreoffice-base (<1: ~ 4.3.0-3ubuntu1 precise1) but 4.3.0-0ubuntu1 ~ precise1 is installed E: Unmet dependencies. Try to use -f. After trying sudo apt-get install -f I got the following output Pakketlijsten worden ingelezen... Klaar Boom van vereisten wordt opgebouwd De status informatie wordt gelezen... Klaar Vereisten worden gecorrigeerd... Klaar De volgende extra pakketten zullen geïnstalleerd worden: libreoffice-base Voorgestelde pakketten: libreoffice-gcj libreoffice-report-builder unixodbc De volgende pakketten zullen opgewaardeerd worden: libreoffice-base 1 pakketten opgewaardeerd, 0 pakketten nieuw geïnstalleerd, 0 te verwijderen en 0 niet opgewaardeerd. 3 pakketten niet volledig geïnstalleerd of verwijderd. Er moeten 0 B/2170 kB aan archieven opgehaald worden. Door deze operatie zal er 2841 kB extra schijfruimte gebruikt worden. Wilt u doorgaan [J/n]? dpkg: vereistenproblemen verhinderen de configuratie van libreoffice-base: libreoffice-base is afhankelijk van libreoffice-base-core (= 1:4.3.0-0ubuntu1~precise1); maar: Versie van libreoffice-base-core op dit systeem is 1:4.3.0-3ubuntu1~precise1. libreoffice-base is afhankelijk van libreoffice-base-drivers (= 1:4.3.0-0ubuntu1~precise1); maar: Versie van libreoffice-base-drivers op dit systeem is 1:4.3.0-3ubuntu1~precise1. libreoffice-base is afhankelijk van libreoffice-core (= 1:4.3.0-0ubuntu1~precise1); maar: Versie van libreoffice-core op dit systeem is 1:4.3.0-3ubuntu1~precise1. libreoffice-core (1:4.3.0-3ubuntu1~precise1) breaks libreoffice-base (<< 1:4.3.0-3ubuntu1~precise1) and is geïnstalleerd. Version of libreoffice-base to be configured is 1:4.3.0-0ubuntu1~precise1. dpkg: fout bij afhandelen van libreoffice-base (--configure): vereistenproblemen - blijft ongeconfigureerd dpkg: vereistenproblemen verhinderen de configuratie van libreoffice-report-builder-bin: libreoffice-report-builder-bin is afhankelijk van libreoffice-base; maar:Er is geen apport-verslag weggeschreven omdat de foutmelding volgt op een eerdere mislukking. Pakket libreoffice-base is nog niet geconfigureerd. dpkg: fout bij afhandelen van libreoffice-report-builder-bin (--configure): vereistenproblemen - blijft ongeconfigureerd dpkg: vereistenproblemen verhinderen de configuratie van libreoffice: libreoffice is afhankelijk van libreoffice-base; maar: Pakket libreoffice-base is nog niet geconfigureerd. libreoffice is afhankelijk van libreoffice-report-builder-bin; maar: Pakket libreoffice-report-builder-bin is nog niet geconfigureerd. dpkg: fout bij afhandelen van libreoffice (--configure): vereistenproblemen - blijft ongeconfigureerd Er is geen apport-verslag weggeschreven omdat de foutmelding volgt op een eerdere mislukking. Er is geen apport-verslag weggeschreven omdat de foutmelding volgt op een eerdere mislukking. Fouten gevonden tijdens behandelen van: libreoffice-base libreoffice-report-builder-bin libreoffice E: Sub-process /usr/bin/dpkg returned an error code (1) How can I solve this problem so the dependencies are solved? Do I have to configure libreoffice-base manually?

  Read the article

• No audio with headphones, but audio works with integrated speakers

  - by Pedro

  My speakers work correctly, but when I plug in my headphones, they don't work. I am running Ubuntu 10.04. My audio card is Realtek ALC259 My laptop model is a HP G62t a10em In another thread someone fixed a similar issue (headphones work, speakers not) folowing this: sudo vi /etc/modprobe.d/alsa-base.conf (or some other editor instead of Vi) Append the following at the end of the file: alias snd-card-0 snd-hda-intel options snd-hda-intel model=auto Reboot but it doesnt work for me. Before making and changes to alsa, this was the output: alsamixer gives me this: Things I did: followed this HowTo but now no hardware seems to be present (before, there were 2 items listed): Now, alsamixer gives me this: alsamixer: relocation error: alsamixer: symbol snd_mixer_get_hctl, version ALSA_0.9 not defined in file libasound.so.2 with link time reference I guess there was and error in the alsa-driver install so I began reinstalling it. cd alsa-driver* //this works fine// sudo ./configure --with-cards=hda-intel --with-kernel=/usr/src/linux-headers-$(uname -r) //this works fine// sudo make //this doesn't work. see ouput error below// sudo make install Final lines of sudo make: hpetimer.c: In function ‘snd_hpet_open’: hpetimer.c:41: warning: implicit declaration of function ‘hpet_register’ hpetimer.c:44: warning: implicit declaration of function ‘hpet_control’ hpetimer.c:44: error: expected expression before ‘unsigned’ hpetimer.c: In function ‘snd_hpet_close’: hpetimer.c:51: warning: implicit declaration of function ‘hpet_unregister’ hpetimer.c:52: error: invalid use of undefined type ‘struct hpet_task’ hpetimer.c: In function ‘hpetimer_init’: hpetimer.c:88: error: ‘EINVAL’ undeclared (first use in this function) hpetimer.c:99: error: invalid use of undefined type ‘struct hpet_task’ hpetimer.c:100: error: invalid use of undefined type ‘struct hpet_task’ hpetimer.c: At top level: hpetimer.c:121: warning: excess elements in struct initializer hpetimer.c:121: warning: (near initialization for ‘__param_frequency’) hpetimer.c:121: warning: excess elements in struct initializer hpetimer.c:121: warning: (near initialization for ‘__param_frequency’) hpetimer.c:121: warning: excess elements in struct initializer hpetimer.c:121: warning: (near initialization for ‘__param_frequency’) hpetimer.c:121: warning: excess elements in struct initializer hpetimer.c:121: warning: (near initialization for ‘__param_frequency’) hpetimer.c:121: error: extra brace group at end of initializer hpetimer.c:121: error: (near initialization for ‘__param_frequency’) hpetimer.c:121: warning: excess elements in struct initializer hpetimer.c:121: warning: (near initialization for ‘__param_frequency’) make[1]: *** [hpetimer.o] Error 1 make[1]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.9/acore' make: *** [compile] Error 1 And then sudo make install gives me: rm -f /lib/modules/0.0.0/misc/snd*.*o /lib/modules/0.0.0/misc/persist.o /lib/modules/0.0.0/misc/isapnp.o make[1]: Entering directory `/usr/src/alsa/alsa-driver-1.0.9/acore' mkdir -p /lib/modules/0.0.0/misc cp snd-hpet.o snd-page-alloc.o snd-pcm.o snd-timer.o snd.o /lib/modules/0.0.0/misc cp: cannot stat `snd-hpet.o': No such file or directory cp: cannot stat `snd-page-alloc.o': No such file or directory cp: cannot stat `snd-pcm.o': No such file or directory cp: cannot stat `snd-timer.o': No such file or directory cp: cannot stat `snd.o': No such file or directory make[1]: *** [_modinst__] Error 1 make[1]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.9/acore' make: *** [install-modules] Error 1 [SOLUTION] After screwing it all up, someone mentioned why not trying using the packages in Synaptic - so I did. I have reinstalled the following packages and rebooter: -alsa-hda-realtek-ignore-sku-dkms -alsa-modules-2.6.32-25-generic -alsa-source -alsa-utils -linux-backports-modules-alsa-lucid-generic -linux-backports-modules-alsa-lucid-generic-pae -linux-sound-base -(i think i listed them all) After rebooting, the audio worked, both in speakers and headphones. I have no idea which is the package that made my audio work, but it certainly was one of them. [/SOLUTION]

  Read the article

• Dynamically creating meta tags in asp.net mvc

  - by Jalpesh P. Vadgama

  As we all know that Meta tag has very important roles in Search engine optimization and if we want to have out site listed with good ranking on search engines then we have to put meta tags. Before some time I have blogged about dynamically creating meta tags in asp.net 2.0/3.5 sites, in this blog post I am going to explain how we can create a meta tag dynamically very easily. To have meta tag dynamically we have to create a meta tag on server-side. So I have created a method like following. public string HomeMetaTags() { System.Text.StringBuilder strMetaTag = new System.Text.StringBuilder(); strMetaTag.AppendFormat(@"<meta content='{0}' name='Keywords'/>","Home Action Keyword"); strMetaTag.AppendFormat(@"<meta content='{0}' name='Descption'/>", "Home Description Keyword"); return strMetaTag.ToString(); } Here you can see that I have written a method which will return a string with meta tags. Here you can write any logic you can fetch it from the database or you can even fetch it from xml based on key passed. For the demo purpose I have written that hardcoded. So it will create a meta tag string and will return it. Now I am going to store that meta tag in ViewBag just like we have a title tag. In this post I am going to use standard template so we have our title tag there in viewbag message. Same way I am going save meta tag like following in ViewBag. public ActionResult Index() { ViewBag.Message = "Welcome to ASP.NET MVC!"; ViewBag.MetaTag = HomeMetaTags(); return View(); } Here in the above code you can see that I have stored MetaTag ViewBag. Now as I am using standard ASP.NET MVC3 template so we have our we have out head element in Shared folder _layout.cshtml file. So to render meta tag I have modified the Head tag part of _layout.cshtml like following. <head> <title>@ViewBag.Title</title> <link href="@Url.Content("~/Content/Site.css")" rel="stylesheet" type="text/css" /> <script src="@Url.Content("~/Scripts/jquery-1.5.1.min.js")" type="text/javascript"></script> @Html.Raw(ViewBag.MetaTag) </head> Here in the above code you can see I have use @Html.Raw method to embed meta tag in _layout.cshtml page. This HTML.Raw method will embed output to head tag section without encoding html. As we have already taken care of html tag in string function we don’t need the html encoding. Now it’s time to run application in browser. Now once you run your application in browser and click on view source you will find meta tag for home page as following. That’s its It’s very easy to create dynamically meta tag. Hope you liked it.. Stay tuned for more.. Till then happy programming.

  Read the article

• Wireless internet is connected to an open network but has no internet

  - by Joshua Reeder

  I just installed Ubuntu on my laptop yesterday and it connected to the wireless fine. Then I took it to school, put it on their wired connection, downloaded some stuff, and now the wireless doesn't work. At first it would detect networks, but not connect. I restarted it and now it can connect, but it acts like it doesn't have internet in the browser. Wired connection still works fine on it. I know it isn't the network because my ipad is working on the wireless connection fine. I found another solution on here switching the security settings for the wireless, but this is the apartment's wireless so they have it open, and I won't be able to mess with it at all. Here is lspci output: 00:00.0 Host bridge: Intel Corporation Core Processor DMI (rev 11) 00:03.0 PCI bridge: Intel Corporation Core Processor PCI Express Root Port 1 (rev 11) 00:08.0 System peripheral: Intel Corporation Core Processor System Management Registers (rev 11) 00:08.1 System peripheral: Intel Corporation Core Processor Semaphore and Scratchpad Registers (rev 11) 00:08.2 System peripheral: Intel Corporation Core Processor System Control and Status Registers (rev 11) 00:08.3 System peripheral: Intel Corporation Core Processor Miscellaneous Registers (rev 11) 00:10.0 System peripheral: Intel Corporation Core Processor QPI Link (rev 11) 00:10.1 System peripheral: Intel Corporation Core Processor QPI Routing and Protocol Registers (rev 11) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) 00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 05) 00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 05) 00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 05) 00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) 01:00.0 VGA compatible controller: NVIDIA Corporation GT218 [GeForce 310M] (rev a2) 01:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1) 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05) 07:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN Controller (rev 10) 16:00.0 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 20) 16:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 20) 16:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 20) 16:00.4 System peripheral: JMicron Technology Corp. xD Host Controller (rev 20) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-Core Registers (rev 04) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 04) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 04) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 04) ff:03.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller (rev 04) ff:03.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Target Address Decoder (rev 04) ff:03.4 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Test Registers (rev 04) ff:04.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Control Registers (rev 04) ff:04.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Address Registers (rev 04) ff:04.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Rank Registers (rev 04) ff:04.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Thermal Control Registers (rev 04) ff:05.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Control Registers (rev 04) ff:05.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Address Registers (rev 04) ff:05.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Rank Registers (rev 04) ff:05.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Thermal Control Registers (rev 04) Update: I re-installed Ubuntu 12.04 (I assumed I messed something up while toying with it) but it did not solve the problem. Eventually, I got it to work with my school's wireless internet (the default network settings were wrong), but the internet still doesn't work on my apartment's wifi (it has no security on it).

  Read the article

• Asynchrony in C# 5: Dataflow Async Logger Sample

  - by javarg

  Check out this (very simple) code examples for TPL Dataflow. Suppose you are developing an Async Logger to register application events to different sinks or log writers. The logger architecture would be as follow: Note how blocks can be composed to achieved desired behavior. The BufferBlock<T> is the pool of log entries to be process whereas linked ActionBlock<TInput> represent the log writers or sinks. The previous composition would allows only one ActionBlock to consume entries at a time. Implementation code would be something similar to (add reference to System.Threading.Tasks.Dataflow.dll in %User Documents%\Microsoft Visual Studio Async CTP\Documentation): TPL Dataflow Logger var bufferBlock = new BufferBlock<Tuple<LogLevel, string>>(); ActionBlock<Tuple<LogLevel, string>> infoLogger =     new ActionBlock<Tuple<LogLevel, string>>(         e => Console.WriteLine("Info: {0}", e.Item2)); ActionBlock<Tuple<LogLevel, string>> errorLogger =     new ActionBlock<Tuple<LogLevel, string>>(         e => Console.WriteLine("Error: {0}", e.Item2)); bufferBlock.LinkTo(infoLogger, e => (e.Item1 & LogLevel.Info) != LogLevel.None); bufferBlock.LinkTo(errorLogger, e => (e.Item1 & LogLevel.Error) != LogLevel.None); bufferBlock.Post(new Tuple<LogLevel, string>(LogLevel.Info, "info message")); bufferBlock.Post(new Tuple<LogLevel, string>(LogLevel.Error, "error message")); Note the filter applied to each link (in this case, the Logging Level selects the writer used). We can specify message filters using Predicate functions on each link. Now, the previous sample is useless for a Logger since Logging Level is not exclusive (thus, several writers could be used to process a single message). Let´s use a Broadcast<T> buffer instead of a BufferBlock<T>. Broadcast Logger var bufferBlock = new BroadcastBlock<Tuple<LogLevel, string>>(     e => new Tuple<LogLevel, string>(e.Item1, e.Item2)); ActionBlock<Tuple<LogLevel, string>> infoLogger =     new ActionBlock<Tuple<LogLevel, string>>(         e => Console.WriteLine("Info: {0}", e.Item2)); ActionBlock<Tuple<LogLevel, string>> errorLogger =     new ActionBlock<Tuple<LogLevel, string>>(         e => Console.WriteLine("Error: {0}", e.Item2)); ActionBlock<Tuple<LogLevel, string>> allLogger =     new ActionBlock<Tuple<LogLevel, string>>(     e => Console.WriteLine("All: {0}", e.Item2)); bufferBlock.LinkTo(infoLogger, e => (e.Item1 & LogLevel.Info) != LogLevel.None); bufferBlock.LinkTo(errorLogger, e => (e.Item1 & LogLevel.Error) != LogLevel.None); bufferBlock.LinkTo(allLogger, e => (e.Item1 & LogLevel.All) != LogLevel.None); bufferBlock.Post(new Tuple<LogLevel, string>(LogLevel.Info, "info message")); bufferBlock.Post(new Tuple<LogLevel, string>(LogLevel.Error, "error message")); As this block copies the message to all its outputs, we need to define the copy function in the block constructor. In this case we create a new Tuple, but you can always use the Identity function if passing the same reference to every output. Try both scenarios and compare the results.

  Read the article

• Getting UPK data into Excel

  - by maria.cozzolino(at)oracle.com

  Did you ever want someone to review your UPK outline outside of the Developer? You can send your outline to an Excel report, which can be distributed through email. Depending on how much additional data you want with your outline, there are two ways you can do this task. Basic data: • You can print a listing of all the items in the outline. • With your outline open, choose File/Print... • Choose the "Save document as" command on the right, and choose Excel (or xlsx). • HINT: If you have not expanded your entire outline, it's faster to use the commands in Developer to expand the entire outline. However, you can expand specific sections by clicking on them in the print preview. • NOTE: If you have the Details view displayed rather than the Player view, you can print all the data that appears in that view. Advanced data: If you desire a more detailed report, you can use the HP Quality Center publishing style, which also creates an Excel file. This style contains a default set of fields for use with Quality Center, but any of the metadata fields can be added to the report, and it can be used for more than just importing into HP Quality Center. To add additional columns to the HP Quality Center publishing style: 1. Make a copy of the publishing style. This process ensures that you have a good copy to revert to if something goes wrong with your customizations, and also allows you to keep your modifications when the software is upgraded. 2. Open the copy of the columnspec.xml file in your favorite XML editor - I use notepad. (This file is located in a language-specific folder in the HP Quality Center publishing style.) 3. Scroll down the columnspec file until you find the column to include. All the metadata fields that can be added to the report are listed in the columnspec file - you just need to tell the system to include the columns. 4. You will see a series of sections like this: 5. Change the value for "col export" to "yes". This will include the column in the Excel file. 6. If desired, change the value for "Play_ModesColHeader" to be whatever name you wish to appear in the Excel column heading. 7. Save the columnspec file. 8. Save the publishing style package. Now, when you publish for HP Quality Center, you will see your newly added columns. You can refer to the section on Customizing HP Quality Center Output in the Content Deployment Guide for additional customization details. Happy customization! I'd be interested in hearing what other uses you have for Excel reporting. Wishing you and yours a happy and healthy New Year! ~~Maria Cozzolino, Manager of Software Requirements and UI

  Read the article

• Help trying to get two-finger scrolling to work on Asus UL80VT

  - by Dan2k3k4

  Multi-touch works fine on Windows 7 with: two-fingers scroll vertical and horizontally, two-finger tap for middle click, and three-finger tap for right click. However with Ubuntu, I've never been able to get multi-touch to "save" and work, I was able to get it to work a few times but after restarting - it would just reset back. I have the settings for two-finger scrolling on: Mouse and Touchpad Touchpad Two-finger scrolling (selected) Enable horizontal scrolling (ticked) The cursor stops moving when I try to scroll with two fingers, but it doesn't actually scroll the page. When I perform xinput list, I get: Virtual core pointer id=2 [master pointer (3)] ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ETPS/2 Elantech ETF0401 id=13 [slave pointer (2)] I've tried to install some 'synaptics-dkms' bug-fix (from a few years back) but that didn't work, so I removed that. I've tried installing 'uTouch' but that didn't seem to do anything so removed it. Here's what I have installed now: dpkg --get-selections installed-software grep 'touch\|mouse\|track\|synapt' installed-software libsoundtouch0 --- install libutouch-evemu1 --- install libutouch-frame1 --- install libutouch-geis1 --- install libutouch-grail1 --- install printer-driver-ptouch --- install ptouch-driver --- install xserver-xorg-input-multitouch --- install xserver-xorg-input-mouse --- install xserver-xorg-input-vmmouse --- install libnetfilter-conntrack3 --- install libxatracker1 --- install xserver-xorg-input-synaptics --- install So, I'll start again, what should I do now to get two-finger scrolling to work and ensure it works after restarting? Also doing: synclient TapButton1=1 TapButton2=2 TapButton3=3 ...works but doesn't save after restarting. However doing: synclient VertTwoFingerScroll=1 HorizTwoFingerScroll=1 Does NOT work to fix the two-finger scrolling. Output of: cat /var/log/Xorg.0.log | grep -i synaptics [ 4.576] (II) LoadModule: "synaptics" [ 4.577] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 4.577] (II) Module synaptics: vendor="X.Org Foundation" [ 4.577] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech ETF0401' [ 4.577] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 4.584] (--) synaptics: ETPS/2 Elantech ETF0401: x-axis range 0 - 1088 [ 4.584] (--) synaptics: ETPS/2 Elantech ETF0401: y-axis range 0 - 704 [ 4.584] (--) synaptics: ETPS/2 Elantech ETF0401: pressure range 0 - 255 [ 4.584] (--) synaptics: ETPS/2 Elantech ETF0401: finger width range 0 - 16 [ 4.584] (--) synaptics: ETPS/2 Elantech ETF0401: buttons: left right middle double triple scroll-buttons [ 4.584] (--) synaptics: ETPS/2 Elantech ETF0401: Vendor 0x2 Product 0xe [ 4.584] (--) synaptics: ETPS/2 Elantech ETF0401: touchpad found [ 4.588] (**) synaptics: ETPS/2 Elantech ETF0401: (accel) MinSpeed is now constant deceleration 2.5 [ 4.588] (**) synaptics: ETPS/2 Elantech ETF0401: MaxSpeed is now 1.75 [ 4.588] (**) synaptics: ETPS/2 Elantech ETF0401: AccelFactor is now 0.154 [ 4.589] (--) synaptics: ETPS/2 Elantech ETF0401: touchpad found Tried installing synaptiks but that didn't seem to work either, so removed it. Temporary Fix (works until I restart) Doing the following commands: modprobe -r psmouse modprobe psmouse proto=imps Works but now xinput list shows up as: Virtual core pointer id=2 [master pointer (3)] ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ImPS/2 Generic Wheel Mouse id=13 [slave pointer (2)] Instead of Elantech, and it gets reset when I reboot. Solution (not ideal for most people) So, I ended up reinstalling a fresh 12.04 after indirectly playing around with burg and plymouth then removing plymouth which removed 50+ packages (I saw the warnings but was way too tired and assumed I could just 'reinstall' them all after (except that didn't work). Right now xinput list shows up as: ? Virtual core pointer --- id=2 [master pointer (3)] ? ? Virtual core XTEST pointer --- id=4 [slave pointer (2)] ? ? ETPS/2 Elantech Touchpad --- id=13 [slave pointer (2)] grep 'touch\|mouse\|track\|synapt' installed-software libnetfilter-conntrack3 --- install libsoundtouch0 --- install libutouch-evemu1 --- install libutouch-frame1 --- install libutouch-geis1 --- install libutouch-grail1 --- install libxatracker1 --- install mousetweaks --- install printer-driver-ptouch --- install xserver-xorg-input-mouse --- install xserver-xorg-input-synaptics --- install xserver-xorg-input-vmmouse --- install cat /var/log/Xorg.0.log | grep -i synaptics [ 4.890] (II) LoadModule: "synaptics" [ 4.891] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 4.892] (II) Module synaptics: vendor="X.Org Foundation" [ 4.892] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad' [ 4.892] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 4.956] (II) synaptics: ETPS/2 Elantech Touchpad: ignoring touch events for semi-multitouch device [ 4.956] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 1088 [ 4.956] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 704 [ 4.956] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255 [ 4.956] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15 [ 4.956] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple [ 4.956] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe [ 4.956] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found [ 4.980] () synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5 [ 4.980] () synaptics: ETPS/2 Elantech Touchpad: MaxSpeed is now 1.75 [ 4.980] (**) synaptics: ETPS/2 Elantech Touchpad: AccelFactor is now 0.154 [ 4.980] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found So, if all else fails, reinstall Linux :/

  Read the article

• MP3 player mpman TS300 not recognized

  - by Nick Lemaire

  I just received a mpman ts300 mp3 player for Christmas. But when I try to connect it to ubuntu (10.10) through usb it doesn't seem to be recognized. I searched for a linuxdriver but came up with nothing. I even tried installing mpman manager from the software center, but still the same problem... Has anybody got any ideas about how to fix this? Thank you edit: some additional information When I plug it in, it doesn't show up under /dev. And it is not listed in the result of 'lsusb' This is the output of 'dmesg' [19571.732541] usb 1-4: new high speed USB device using ehci_hcd and address 2 [19571.889154] scsi7 : usb-storage 1-4:1.0 [19572.883155] scsi 7:0:0:0: Direct-Access TS300 USB DISK 1.00 PQ: 0 ANSI: 0 [19572.885856] sd 7:0:0:0: Attached scsi generic sg2 type 0 [19572.887266] sd 7:0:0:0: [sdb] 7868416 512-byte logical blocks: (4.02 GB/3.75 GiB) [19573.012547] usb 1-4: reset high speed USB device using ehci_hcd and address 2 [19573.292550] usb 1-4: reset high speed USB device using ehci_hcd and address 2 [19573.572565] usb 1-4: reset high speed USB device using ehci_hcd and address 2 [19573.725019] sd 7:0:0:0: [sdb] Test WP failed, assume Write Enabled [19573.725024] sd 7:0:0:0: [sdb] Assuming drive cache: write through [19573.728521] sd 7:0:0:0: [sdb] Attached SCSI removable disk [19575.333015] sd 7:0:0:0: [sdb] 7868416 512-byte logical blocks: (4.02 GB/3.75 GiB) [19575.452547] usb 1-4: reset high speed USB device using ehci_hcd and address 2 [19580.603253] usb 1-4: device descriptor read/all, error -110 [19580.722560] usb 1-4: reset high speed USB device using ehci_hcd and address 2 [19595.842579] usb 1-4: device descriptor read/64, error -110 [19611.072656] usb 1-4: device descriptor read/64, error -110 [19611.302540] usb 1-4: reset high speed USB device using ehci_hcd and address 2 [19616.332568] usb 1-4: device descriptor read/8, error -110 [19621.462692] usb 1-4: device descriptor read/8, error -110 [19621.692551] usb 1-4: reset high speed USB device using ehci_hcd and address 2 [19626.722567] usb 1-4: device descriptor read/8, error -110 [19631.852802] usb 1-4: device descriptor read/8, error -110 [19631.962587] usb 1-4: USB disconnect, address 2 [19631.962587] sd 7:0:0:0: Device offlined - not ready after error recovery [19631.962840] sd 7:0:0:0: [sdb] Assuming drive cache: write through [19631.965104] sd 7:0:0:0: [sdb] READ CAPACITY failed [19631.965109] sd 7:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [19631.965112] sd 7:0:0:0: [sdb] Sense not available. [19631.965125] sd 7:0:0:0: [sdb] Assuming drive cache: write through [19631.965130] sdb: detected capacity change from 4028628992 to 0 [19632.130042] usb 1-4: new high speed USB device using ehci_hcd and address 3 [19647.242550] usb 1-4: device descriptor read/64, error -110 [19662.472560] usb 1-4: device descriptor read/64, error -110 [19662.702566] usb 1-4: new high speed USB device using ehci_hcd and address 4 [19677.822587] usb 1-4: device descriptor read/64, error -110 [19693.052575] usb 1-4: device descriptor read/64, error -110 [19693.282582] usb 1-4: new high speed USB device using ehci_hcd and address 5 [19698.312600] usb 1-4: device descriptor read/8, error -110 [19703.442594] usb 1-4: device descriptor read/8, error -110 [19703.672548] usb 1-4: new high speed USB device using ehci_hcd and address 6 [19708.702581] usb 1-4: device descriptor read/8, error -110 [19713.840077] usb 1-4: device descriptor read/8, error -110 [19713.942555] hub 1-0:1.0: unable to enumerate USB device on port 4 [19714.262545] usb 4-2: new full speed USB device using uhci_hcd and address 2 [19729.382549] usb 4-2: device descriptor read/64, error -110 [19744.612534] usb 4-2: device descriptor read/64, error -110 [19744.842543] usb 4-2: new full speed USB device using uhci_hcd and address 3 [19759.962714] usb 4-2: device descriptor read/64, error -110 [19775.200047] usb 4-2: device descriptor read/64, error -110 [19775.422630] usb 4-2: new full speed USB device using uhci_hcd and address 4 [19780.444498] usb 4-2: device descriptor read/8, error -110 [19785.574491] usb 4-2: device descriptor read/8, error -110 [19785.802547] usb 4-2: new full speed USB device using uhci_hcd and address 5 [19790.824490] usb 4-2: device descriptor read/8, error -110 [19795.961473] usb 4-2: device descriptor read/8, error -110 [19796.062556] hub 4-0:1.0: unable to enumerate USB device on port 2

  Read the article

• Dual Screen will only mirror after 12.04 upgrade

  - by Ne0

  I have been using Ubuntu with a dual screen for years now, after upgrading to 12.04 LTS i cannot get my dual screen working properly Graphics: 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV350 AR [Radeon 9600] 01:00.1 Display controller: Advanced Micro Devices [AMD] nee ATI RV350 AR [Radeon 9600] (Secondary) I noticed i was using open source drivers and attempted to install official binaries using the methods in this thread. Output: liam@liam-desktop:~$ sudo apt-get install fglrx fglrx-amdcccle Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be upgraded: fglrx fglrx-amdcccle 2 upgraded, 0 newly installed, 0 to remove and 12 not upgraded. Need to get 45.1 MB of archives. After this operation, 739 kB of additional disk space will be used. Get:1 http://gb.archive.ubuntu.com/ubuntu/ precise/restricted fglrx i386 2:8.960-0ubuntu1 [39.2 MB] Get:2 http://gb.archive.ubuntu.com/ubuntu/ precise/restricted fglrx-amdcccle i386 2:8.960-0ubuntu1 [5,883 kB] Fetched 45.1 MB in 1min 33s (484 kB/s) (Reading database ... 328081 files and directories currently installed.) Preparing to replace fglrx 2:8.951-0ubuntu1 (using .../fglrx_2%3a8.960-0ubuntu1_i386.deb) ... Removing all DKMS Modules Error! There are no instances of module: fglrx 8.951 located in the DKMS tree. Done. Unpacking replacement fglrx ... Preparing to replace fglrx-amdcccle 2:8.951-0ubuntu1 (using .../fglrx-amdcccle_2%3a8.960-0ubuntu1_i386.deb) ... Unpacking replacement fglrx-amdcccle ... Processing triggers for ureadahead ... ureadahead will be reprofiled on next reboot Setting up fglrx (2:8.960-0ubuntu1) ... update-alternatives: warning: forcing reinstallation of alternative /usr/lib/fglrx/ld.so.conf because link group i386-linux-gnu_gl_conf is broken. update-alternatives: warning: skip creation of /etc/OpenCL/vendors/amdocl64.icd because associated file /usr/lib/fglrx/etc/OpenCL/vendors/amdocl64.icd (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: warning: skip creation of /usr/lib32/libaticalcl.so because associated file /usr/lib32/fglrx/libaticalcl.so (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: warning: skip creation of /usr/lib32/libaticalrt.so because associated file /usr/lib32/fglrx/libaticalrt.so (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: warning: forcing reinstallation of alternative /usr/lib/fglrx/ld.so.conf because link group i386-linux-gnu_gl_conf is broken. update-alternatives: warning: skip creation of /etc/OpenCL/vendors/amdocl64.icd because associated file /usr/lib/fglrx/etc/OpenCL/vendors/amdocl64.icd (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: warning: skip creation of /usr/lib32/libaticalcl.so because associated file /usr/lib32/fglrx/libaticalcl.so (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: warning: skip creation of /usr/lib32/libaticalrt.so because associated file /usr/lib32/fglrx/libaticalrt.so (of link group i386-linux-gnu_gl_conf) doesn't exist. update-initramfs: deferring update (trigger activated) update-initramfs: Generating /boot/initrd.img-3.2.0-25-generic-pae Loading new fglrx-8.960 DKMS files... Building only for 3.2.0-25-generic-pae Building for architecture i686 Building initial module for 3.2.0-25-generic-pae Done. fglrx: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/3.2.0-25-generic-pae/updates/dkms/ depmod....... DKMS: install completed. update-initramfs: deferring update (trigger activated) Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Setting up fglrx-amdcccle (2:8.960-0ubuntu1) ... Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-3.2.0-25-generic-pae Processing triggers for libc-bin ... ldconfig deferred processing now taking place liam@liam-desktop:~$ sudo aticonfig --initial -f aticonfig: No supported adapters detected When i attempt to get my settings back to what they were before upgrading i get this message requested position/size for CRTC 81 is outside the allowed limit: position=(1440, 0), size=(1440, 900), maximum=(1680, 1680) and GDBus.Error:org.gtk.GDBus.UnmappedGError.Quark._gnome_2drr_2derror_2dquark.Code3: requested position/size for CRTC 81 is outside the allowed limit: position=(1440, 0), size=(1440, 900), maximum=(1680, 1680) Any idea's on what i need to do to fix this issue?

  Read the article

• career in Mobile sw/Application Development [closed]

  - by pramod

  i m planning to do a course on Wireless & mobile computing.The syllabus are given below.Please check & let me know whether its worth to do.How is the job prospects after that.I m a fresher & from electronic Engg.The modules are- *Wireless and Mobile Computing (WiMC) – Modules* C, C++ Programming and Data Structures 100 Hours C Revision C, C++ programming tools on linux(Vi editor, gdb etc.) OOP concepts Programming constructs Functions Access Specifiers Classes and Objects Overloading Inheritance Polymorphism Templates Data Structures in C++ Arrays, stacks, Queues, Linked Lists( Singly, Doubly, Circular) Trees, Threaded trees, AVL Trees Graphs, Sorting (bubble, Quick, Heap , Merge) System Development Methodology 18 Hours Software life cycle and various life cycle models Project Management Software: A Process Various Phases in s/w Development Risk Analysis and Management Software Quality Assurance Introduction to Coding Standards Software Project Management Testing Strategies and Tactics Project Management and Introduction to Risk Management Java Programming 110 Hours Data Types, Operators and Language Constructs Classes and Objects, Inner Classes and Inheritance Inheritance Interface and Package Exceptions Threads Java.lang Java.util Java.awt Java.io Java.applet Java.swing XML, XSL, DTD Java n/w programming Introduction to servlet Mobile and Wireless Technologies 30 Hours Basics of Wireless Technologies Cellular Communication: Single cell systems, multi-cell systems, frequency reuse, analog cellular systems, digital cellular systems GSM standard: Mobile Station, BTS, BSC, MSC, SMS sever, call processing and protocols CDMA standard: spread spectrum technologies, 2.5G and 3G Systems: HSCSD, GPRS, W-CDMA/UMTS,3GPP and international roaming, Multimedia services CDMA based cellular mobile communication systems Wireless Personal Area Networks: Bluetooth, IEEE 802.11a/b/g standards Mobile Handset Device Interfacing: Data Cables, IrDA, Bluetooth, Touch- Screen Interfacing Wireless Security, Telemetry Java Wireless Programming and Applications Development(J2ME) 100 Hours J2ME Architecture The CLDC and the KVM Tools and Development Process Classification of CLDC Target Devices CLDC Collections API CLDC Streams Model MIDlets MIDlet Lifecycle MIDP Programming MIDP Event Architecture High-Level Event Handling Low-Level Event Handling The CLDC Streams Model The CLDC Networking Package The MIDP Implementation Introduction to WAP, WML Script and XHTML Introduction to Multimedia Messaging Services (MMS) Symbian Programming 60 Hours Symbian OS basics Symbian OS services Symbian OS organization GUI approaches ROM building Debugging Hardware abstraction Base porting Symbian OS reference design porting File systems Overview of Symbian OS Development – DevKits, CustKits and SDKs CodeWarrior Tool Application & UI Development Client Server Framework ECOM STDLIB in Symbian iPhone Programming 80 Hours Introducing iPhone core specifications Understanding iPhone input and output Designing web pages for the iPhone Capturing iPhone events Introducing the webkit CSS transforms transitions and animations Using iUI for web apps Using Canvas for web apps Building web apps with Dashcode Writing Dashcode programs Debugging iPhone web pages SDK programming for web developers An introduction to object-oriented programming Introducing the iPhone OS Using Xcode and Interface builder Programming with the SDK Toolkit OS Concepts & Linux Programming 60 Hours Operating System Concepts What is an OS? Processes Scheduling & Synchronization Memory management Virtual Memory and Paging Linux Architecture Programming in Linux Linux Shell Programming Writing Device Drivers Configuring and Building GNU Cross-tool chain Configuring and Compiling Linux Virtual File System Porting Linux on Target Hardware WinCE.NET and Database Technology 80 Hours Execution Process in .NET Environment Language Interoperability Assemblies Need of C# Operators Namespaces & Assemblies Arrays Preprocessors Delegates and Events Boxing and Unboxing Regular Expression Collections Multithreading Programming Memory Management Exceptions Handling Win Forms Working with database ASP .NET Server Controls and client-side scripts ASP .NET Web Server Controls Validation Controls Principles of database management Need of RDBMS etc Client/Server Computing RDBMS Technologies Codd’s Rules Data Models Normalization Techniques ER Diagrams Data Flow Diagrams Database recovery & backup SQL Android Application 80 Hours Introduction of android Why develop for android Android SDK features Creating android activities Fundamental android UI design Intents, adapters, dialogs Android Technique for saving data Data base in Androids Maps, Geocoding, Location based services Toast, using alarms, Instant messaging Using blue tooth Using Telephony Introducing sensor manager Managing network and wi-fi connection Advanced androids development Linux kernel security Implement AIDL Interface. Project 120 Hours

  Read the article

• Can't boot 12.04 installed alongside Windows 7

  - by PalaceChan

  I realize there are other questions like this one here, but I have visited them and tried several things and nothing is helping. One of them had a suggestion to boot the liveCD, and sudo mount /dev/sda* /mnt and to then chroot and reinstall grub. I did this and it did not help. Then on the Windows side, I downloaded a free version of easyBCD and chose to add a Grub2 Ubuntu 12.04 entry. On restart I saw this entry, but when I click on it it takes me to a Windows failed to boot error, as if it wasn't even trying to boot Ubuntu. I have booted from Ubuntu liveCD once again and have a snapshot of my GParted I ran this bootinfoscript thing from the liveCD, here are my results: It seems grub is on sda. I just want to be able to boot into my Ubuntu on startup. Boot Info Script 0.61 [1 April 2012] ============================= Boot Info Summary: =============================== = Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1041658947 of the same hard drive for core.img. core.img is at this location and looks for (,gpt7)/boot/grub on this drive. sda1: __________________________________________ File system: vfat Boot sector type: Windows 7: FAT32 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: /efi/Boot/bootx64.efi sda2: __________________________________________ File system: Boot sector type: - Boot sector info: Mounting failed: mount: unknown filesystem type '' sda3: __________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe sda4: __________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: sda5: __________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: /bootmgr /boot/bcd sda6: __________________________________________ File system: BIOS Boot partition Boot sector type: Grub2's core.img Boot sector info: sda7: __________________________________________ File system: ext4 Boot sector type: Grub2 (v1.99) Boot sector info: Grub2 (v1.99) is installed in the boot sector of sda7 and looks at sector 1046637581 of the same hard drive for core.img. core.img is at this location and looks for (,gpt7)/boot/grub on this drive. Operating System: Ubuntu 12.04 LTS Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sda8: __________________________________________ File system: swap Boot sector type: - Boot sector info: ============================ Drive/Partition Info: ============================= Drive: sda _______________________________________ Disk /dev/sda: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 1 1,465,149,167 1,465,149,167 ee GPT GUID Partition Table detected. Partition Start Sector End Sector # of Sectors System /dev/sda1 2,048 411,647 409,600 EFI System partition /dev/sda2 411,648 673,791 262,144 Microsoft Reserved Partition (Windows) /dev/sda3 673,792 533,630,975 532,957,184 Data partition (Windows/Linux) /dev/sda4 533,630,976 1,041,658,946 508,027,971 Data partition (Windows/Linux) /dev/sda5 1,412,718,592 1,465,147,391 52,428,800 Windows Recovery Environment (Windows) /dev/sda6 1,041,658,947 1,041,660,900 1,954 BIOS Boot partition /dev/sda7 1,041,660,901 1,396,174,572 354,513,672 Data partition (Windows/Linux) /dev/sda8 1,396,174,573 1,412,718,591 16,544,019 Swap partition (Linux) blkid output: ____________________________________ Device UUID TYPE LABEL /dev/loop0 squashfs /dev/sda1 B498-319E vfat SYSTEM /dev/sda3 820C0DA30C0D92F9 ntfs OS /dev/sda4 168410AB84108EFD ntfs DATA /dev/sda5 AC7A43BA7A438056 ntfs Recovery /dev/sda7 42a5b598-4d8b-471b-987c-5ce8a0ce89a1 ext4 /dev/sda8 5732f1c7-fa51-45c3-96a4-7af3bff13278 swap /dev/sr0 iso9660 Ubuntu 12.04 LTS i386 ================================ Mount points: ================================= Device Mount_Point Type Options /dev/loop0 /rofs squashfs (ro,noatime) /dev/sr0 /cdrom iso9660 (ro,noatime) =========================== sda7/boot/grub/grub.cfg: =========================== How can I get this option? When I was using easyBCD, it kept saying I had no entries at all, so I did the add entry thing for Ubuntu many times and I see several of those on boot screen now. I'd love to get rid of all those unusable options.

  Read the article

• Implicit and Explicit implementations for Multiple Interface inheritance

  Following C#.NET demo explains you all the scenarios for implementation of Interface methods to classes. There are two ways you can implement a interface method to a class. 1. Implicit Implementation 2. Explicit Implementation. Please go though the sample. using System;   namespace ImpExpTest { class Program { static void Main(string[] args) { C o3 = new C(); Console.WriteLine(o3.fu());   I1 o1 = new C(); Console.WriteLine(o1.fu());   I2 o2 = new C(); Console.WriteLine(o2.fu());   var o4 = new C(); //var is considered as C Console.WriteLine(o4.fu());   var o5 = (I1)new C(); //var is considered as I1 Console.WriteLine(o5.fu());   var o6 = (I2)new C(); //var is considered as I2 Console.WriteLine(o6.fu());   D o7 = new D(); Console.WriteLine(o7.fu());   I1 o8 = new D(); Console.WriteLine(o8.fu());   I2 o9 = new D(); Console.WriteLine(o9.fu()); } }   interface I1 { string fu(); }   interface I2 { string fu(); }   class C : I1, I2 { #region Imicitly Defined I1 Members public string fu() { return "Hello C"; } #endregion Imicitly Defined I1 Members   #region Explicitly Defined I1 Members   string I1.fu() { return "Hello from I1"; }   #endregion Explicitly Defined I1 Members   #region Explicitly Defined I2 Members   string I2.fu() { return "Hello from I2"; }   #endregion Explicitly Defined I2 Members }   class D : C { #region Imicitly Defined I1 Members public string fu() { return "Hello from D"; } #endregion Imicitly Defined I1 Members } }.csharpcode, .csharpcode pre{ font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/}.csharpcode pre { margin: 0em; }.csharpcode .rem { color: #008000; }.csharpcode .kwrd { color: #0000ff; }.csharpcode .str { color: #006080; }.csharpcode .op { color: #0000c0; }.csharpcode .preproc { color: #cc6633; }.csharpcode .asp { background-color: #ffff00; }.csharpcode .html { color: #800000; }.csharpcode .attr { color: #ff0000; }.csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em;}.csharpcode .lnum { color: #606060; }Output:-Hello C Hello from I1 Hello from I2 Hello C Hello from I1 Hello from I2 Hello from D Hello from I1 Hello from I2 span.fullpost {display:none;}

  Read the article

• The type 'XXX' is defined in an assembly that is not referenced exception after upgrade to ASP.NET 4

  - by imran_ku07

     Introduction :          I found two posts in ASP.NET MVC forums complaining that they are getting exception, The type XXX is defined in an assembly that is not referenced, after upgrading thier application into Visual Studio 2010 and .NET Framework 4.0 at here and here .   Description :           The reason why they are getting the above exception is the use of new clean web.config without referencing the assemblies which were presents in ASP.NET 3.5 web.config. The quick solution for this problem is to add the old assemblies in new web.config.          <assemblies>             <add assembly="System.Web.Abstractions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>             <add assembly="System.Web.Routing, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>             <add assembly="System.Web.Mvc, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>              <add assembly="System.Data.Entity, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />              <add assembly="System.Data.Linq, Version=4.0.0.0, Culture=neutral, publicKeyToken=b77a5c561934e089" />          </assemblies>    How It works :            Currently i have not tested the above scenario in ASP.NET 4.0 because i have not yet get it. But the above scenario can easily be tested and verified in VS 2008. Just Open the root web.config and remove           <add assembly="System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>             Even you add the reference of System.Core in your project, you will still get the above exception because aspx pages are compiled in separate assembly. You can check this yourself by checking Show Detailed Compiler Output: below in the yellow screen of death, you will find something,/out:"C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\Temporary ASP.NET Files\root\e907aee4\5fa0acc8\App_Web_y5rd6bdg.dll"             This shows that aspx pages are compiled in separate assembly in Temporary ASP.NET Files.Summary :             After getting the above exception make sure to add the assemblies in web.config or add the Assembly directive at Page level. Hopefully this will helps to solve your problem.       

  Read the article

• How to inhibit suspend temporarily?

  - by Zorn

  I have searched around a bit for this and can't seem to find anything helpful. I have my PC running Ubuntu 12.10 set up to suspend after 30 minutes of inactivity. I don't want to change that, it works great most of the time. What I do want to do is disable the automatic suspend if a particular application is running. How can I do this? The closest thing I've found so far is to add a shell script in /usr/lib/pm-utils/sleep.d which checks if the application is running and returns 1 to indicate that suspend should be prevented. But it looks like the system then gives up on suspending automatically, instead of trying again after another 30 minutes. (As far as I can tell, if I move the mouse, that restarts the timer again.) It's quite likely the application will finish after a couple of hours, and I'd rather my PC then suspended automatically if I'm not using it at that point. (So I don't want to add a call to pm-suspend when the application finishes.) Is this possible? Any advice would be appreciated. Cheers. EDIT: As I noted in one of the comments below, what I actually wanted was to inhibit suspend when my PC was serving files over NFS; I just wanted to focus on the "suspend" part of the question because I already had an idea how to solve the NFS part. Using the 'xdotool' idea given in one of the answers, I have come up with the following script which I run from cron every few minutes. It's not ideal because it stops the screensaver kicking in as well, but it does work. I need to have a look at why 'caffeine' doesn't correctly re-enable suspend later on, then I could probably do better. Anyway, this does seem to work, so I'm including it here in case anyone else is interested. #!/bin/bash # If the output of this function changes between two successive runs of this # script, we inhibit auto-suspend. function check_activity() { /usr/sbin/nfsstat --server --list } # Prevent the automatic suspend from kicking in. function inhibit_suspend() { # Slightly jiggle the mouse pointer about; we do a small step and # reverse step to try to stop this being annoying to anyone using the # PC. TODO: This isn't ideal, apart from being a bit hacky it stops # the screensaver kicking in as well, when all we want is to stop # the PC suspending. Can 'caffeine' help? export DISPLAY=:0.0 xdotool mousemove_relative --sync -- 1 1 xdotool mousemove_relative --sync -- -1 -1 } LOG="$HOME/log/nfs-suspend-blocker.log" ACTIVITYFILE1="$HOME/tmp/nfs-suspend-blocker.current" ACTIVITYFILE2="$HOME/tmp/nfs-suspend-blocker.previous" echo "Started run at $(date)" >> "$LOG" if [ ! -f "$ACTIVITYFILE1" ]; then check_activity > "$ACTIVITYFILE1" exit 0; fi /bin/mv "$ACTIVITYFILE1" "$ACTIVITYFILE2" check_activity > "$ACTIVITYFILE1" if cmp --quiet "$ACTIVITYFILE1" "$ACTIVITYFILE2"; then echo "No activity detected since last run" >> "$LOG" else echo "Activity detected since last run; inhibiting suspend" >> "$LOG" inhibit_suspend fi

  Read the article

• Proactive Support Sessions at OUG London and OUG Ireland

  - by THE

  .conf td { width: 350px; border: 1px solid black; background-color: #ffcccc; } table { border: 1px solid black; } tr { border: 0px solid black; } td { border: 1px solid black; padding: 5px; } Oracle Proactive Support Technology is proud to announce that two members of its team will be speaking at the UK and Ireland User Group Conferences this year. Maurice and Greg plan to run the following sessions (may be subject to change): Maurice Bauhahn OUG Ireland BI & EPM and Technology Joint SIG Meeting 20 November 2012 BI&EPM SIG event in Ireland (09:00-17:00) and OUG London EPM & Hyperion Conference 2012 Tuesday 23rd to Wednesday 24th Oct 2012 Profit from Oracle Diagnostic Tools Embedded in EPM Oracle bundles in many of its software suites valuable toolsets to collect logs and settings, slice/dice error messages, track performance, and trace activities across services. Become familiar with several enterprise-level diagnostic tools embedded in Enterprise Performance Management (Enterprise Manager Fusion Middleware Control, Remote Diagnostic Agent, Dynamic Monitoring Service, and Oracle Diagnostic Framework). Expedite resolution of Service Requests as you learn to upload output from these tools to My Oracle Support. Who will benefit from attending the session? Geeks will find this most beneficial, but anyone who raises Oracle technical service requests will learn valuable pointers that may speed resolution. The focus is on the EPM stack, but this session will benefit almost everyone who needs to drill deeper into Oracle software environments. What will delegates learn from the session? Delegates who participate in this session will learn: How to access and run Remote Diagnostic Agent, Enterprise Manager Fusion Middleware Control, Dynamic Monitoring Service, and Oracle Diagnostic Framework. How to exploit the strengths of each tool. How to pass the outputs to My Oracle Support. How to restrict exposure of sensitive information. OUG Ireland BI & EPM and Technology Joint SIG Meeting 20 November 2012 BI&EPM SIG event in Ireland (09:00-17:00) and OUG London EPM & Hyperion Conference 2012 Tuesday 23rd to Wednesday 24th Oct 2012 Using EPM-Specific Troubleshooting Tools EPM developers have created a number of EPM-specific tools to collect logs and configuration files, centralize configuration information, and validate a configured installation (Ziplogs, EPM Registry Editor, [Deployment Report, Registry Cleanup Utility, Reset Configuration Tool, EPMSYS Hostname Check] and Validate [EPM System Diagnostic]). Learn how to use these tools on your own or to expedite Service Request resolution. Who will benefit from attending the session? Anyone who monitors Oracle EPM environments or raises service requests will learn valuable lessons that could speed resolution of those requests. Anyone from novices to experts will benefit from this review of custom troubleshooting EPM tools. What will delegates learn from the session? Learn where to locate and start EPM troubleshooting tools created by EPM developers Learn how to collect and upload outputs of EPM troubleshooting tools. Adapt to history of changes in these tools across time and version. Learn how to make critical changes in configurations. Grzegorz Reizer OUG London EPM & Hyperion Conference 2012 Tuesday 23rd to Wednesday 24th Oct 2012 EPM 11.1.2.2: Detailed overview of new features and improvements in Financial Management products. This presentation is a detailed overview of new features and improvements introduced in Enterprise Performance Management 11.1.2.2 for Financial Management products (Hyperion Financial Managment, Hyperion Planning, Financial Close Management). The presentation will cover a number of new product features from recently introduced configurable dimensionality in HFM to new functionality enhancements in Planning. We'll close the session with an overview of upgrade options from earlier product releases.

  Read the article

• BlueTooth not working on my HP Probook 4720s

  - by mtrento

  the blue tooth on my ubuntu 11.10 does not work. When i try to ad a device it scans indefinitely and never find anything. Wireless is working perfeclty and with windows 7 it is detected. As i read somewhere , the bluetooth is not listed in the usb devices. Is it supported under ubuntu? here are the output of the various debug command i tested : hciconfig -a hci0: Type: BR/EDR Bus: USB BD Address: E0:2A:82:7A:8B:04 ACL MTU: 310:10 SCO MTU: 64:8 UP RUNNING PSCAN ISCAN RX bytes:1895 acl:0 sco:0 events:70 errors:0 TX bytes:1986 acl:0 sco:0 commands:64 errors:0 Features: 0xff 0xff 0x8f 0xfe 0x9b 0xff 0x59 0x83 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH HOLD SNIFF PARK Link mode: SLAVE ACCEPT Name: 'PC543host-0' Class: 0x5a0100 Service Classes: Networking, Capturing, Object Transfer, Telephony Device Class: Computer, Uncategorized HCI Version: 2.1 (0x4) Revision: 0x149c LMP Version: 2.1 (0x4) Subversion: 0x149c Manufacturer: Cambridge Silicon Radio (10) hcitool scan hcitool scan Scanning ... lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 04f2:b1ac Chicony Electronics Co., Ltd Bus 002 Device 003: ID 413c:3010 Dell Computer Corp. Optical Wheel Mouse Bus 002 Device 004: ID 148f:1000 Ralink Technology, Corp. lsmod | grep -i bluetooth bluetooth 166112 23 bnep,rfcomm,btusb dmesg | grep -i bluetooth [ 18.543947] Bluetooth: Core ver 2.16 [ 18.544017] Bluetooth: HCI device and connection manager initialized [ 18.544020] Bluetooth: HCI socket layer initialized [ 18.544021] Bluetooth: L2CAP socket layer initialized [ 18.545469] Bluetooth: SCO socket layer initialized [ 18.548890] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 30.204776] Bluetooth: RFCOMM TTY layer initialized [ 30.204782] Bluetooth: RFCOMM socket layer initialized [ 30.204784] Bluetooth: RFCOMM ver 1.11 [ 30.247291] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 30.247295] Bluetooth: BNEP filters: protocol multicast lspci 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) 00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 05) 00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 05) 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 05) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05) 01:00.0 VGA compatible controller: ATI Technologies Inc Manhattan [Mobility Radeon HD 5400 Series] 01:00.1 Audio device: ATI Technologies Inc Manhattan HDMI Audio [Mobility Radeon HD 5000 Series] 44:00.0 Network controller: Ralink corp. RT3090 Wireless 802.11n 1T/1R PCIe 45:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no 1: hci0: Bluetooth Soft blocked: no Hard blocked: no 2: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no 3: hp-bluetooth: Bluetooth Soft blocked: no Hard blocked: no

  Read the article

< Previous Page | 682 683 684 685 686 687 688 689 690 691 692 693  | Next Page >