Search Results

Search found 5367 results on 215 pages for 'devices'.

Page 69/215 | < Previous Page | 65 66 67 68 69 70 71 72 73 74 75 76  | Next Page >

• Fuji camera "mounts" but folder not in Dolphin After Kubuntu 13.10 upgrade

  - by user207207

  Fuji camera mount reported in attached devices but not visible in Dolphin After Kubuntu 13.10 upgrade Have reinstalled the driver, and a few other suggestions, for other cameras mounts failing on previous Ubuntu upgrades. I have already spent a couple of hours trying to get my photo's off the camera, very annoying. Worked perfectly in 11.04, 11.10, 12.04, 12.10 and 13.04. dmesg | tail; lsusb; lsb_release -a [ 6181.858786] CPUM: APIC 03 at 00000000fee00000 (mapped at ffffc90009400000) - ver 0x80050010, lint0=0x10700 lint1=0x10400 pc=0x00400 thmr=0x10000 [17261.396236] CPUM: APIC 00 at 00000000fee00000 (mapped at ffffc90000c6a000) - ver 0x80050010, lint0=0x10700 lint1=0x00400 pc=0x00400 thmr=0x10000 [17261.396239] CPUM: APIC 03 at 00000000fee00000 (mapped at ffffc90000c72000) - ver 0x80050010, lint0=0x10700 lint1=0x10400 pc=0x00400 thmr=0x10000 [17261.396241] CPUM: APIC 02 at 00000000fee00000 (mapped at ffffc90000c70000) - ver 0x80050010, lint0=0x10700 lint1=0x10400 pc=0x00400 thmr=0x10000 [17261.396255] CPUM: APIC 01 at 00000000fee00000 (mapped at ffffc90000c6e000) - ver 0x80050010, lint0=0x10700 lint1=0x10400 pc=0x00400 thmr=0x10000 [32456.884907] usb 2-5: new high-speed USB device number 2 using ehci-pci [32457.654046] usb 2-5: New USB device found, idVendor=04cb, idProduct=01e8 [32457.654050] usb 2-5: New USB device strings: Mfr=0, Product=2, SerialNumber=3 [32457.654052] usb 2-5: Product: Digital Camera [32457.654053] usb 2-5: SerialNumber: 4C3230302020091117CAA59WP18548 Bus 002 Device 002: ID 04cb:01e8 Fuji Photo Film Co., Ltd Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 2013:024f PCTV Systems nanoStick T2 290e Bus 001 Device 002: ID 046d:082d Logitech, Inc. HD Pro Webcam C920 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub No LSB modules are available. Distributor ID: Ubuntu vissibleDescription: Ubuntu 13.10 Release: 13.10 Codename: saucy sudo apt-get install gvfs-bin gvfs-mount gphoto2://[usb:002,002] Error mounting location: Error initializing camera: -108: No such file or directory ...... I have reported a bug in Dolphin, which has been transferred to Solid. Further information : I ran solid-hardware list details udi = '/org/kde/solid/udev/sys/devices/pci0000:00/0000:00:04.1/usb2/2-5' parent = '/org/kde/solid/udev' (string) vendor = '04cb' (string) product = 'Digital Camera' (string) description = 'Camera' (string) Block.major = 189 (0xbd) (int) Block.minor = 137 (0x89) (int) Block.device = '/dev/bus/usb/002/010' (string) Camera.supportedProtocols = {'ptp'} (string list) Camera.supportedDrivers = {'gphoto'} (string list) I still can't get my photo's off, I can see the folders using the Gimp menu. If anyone has got any ideas, I'm willing to try them.

  Read the article

• What can I do with enthusiast single board computers?

  - by ajax81

  I'm a career Windows developer and the only experience I have interfacing hardware is with printers, USB, and point-of-sale devices. However, after reading this article my interest in enthusiast programmable boards has been peaked. Unfortunately, I'm at a loss when it comes to exactly what I would do with one of these boards. Are activities limited to simple exercises akin to the projects in high school where we hooked LED's up to bread boards and made them blink? or are they capable of much, much more?

  Read the article

• Android game development in c++

  - by kamziro

  So being a primarily c/c++ developer, I've always thought that the only option for mobile game development for me was using iOS, which allows for c/c++ (and minimising objective C). I heard from a friend though, that android has a native development toolkit which allows for c++ code to work on android. Has anyone used this, and if so, how do you find it? I mean, will it "just work" like iOS, or are there more considerations that need to be taken care of due to the wide variety of android devices available?

  Read the article

• Steam doesnt launch , ubuntu 12.10

  - by Star Diamond

  I installed steam for ubuntu , so I tried to launch it and i get this : ~$ steam Installing breakpad exception handler for appid(steam)/version(1352224866_client) ~$ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 12.10 Release: 12.10 Codename: quantal ~$ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Whistler XT [AMD Radeon HD 6700M Series] (rev ff) What is the problem and how to fix it? thank you

  Read the article

• Wubi no longer supports install to fakeraid?

  - by Ryan

  About a week ago I used wubi to install ubuntu onto one of my two raid1 devices in windows 7. I tried to do the same this week on the same mobo/drive combo and now I can't get it to install. It gives me first an "invalid prefix" during the install and then says "completing install" followed by a crash into busybox with a warning that the raid can't be mounted because it already was mounted. Has there been a change in wubi or something in the recent past?

  Read the article

• Top 10 Data Disasters of 2009

  From stolen devices and phishing attacks, to buggy apps and human blunders, 2009 was a banner year for data breaches. Here are 10 from which we can learn a lot.

  Read the article

• ISC-DHCP not providing address

  - by kiler129

  I just replaced my old router using server with Ubuntu. Everything's fine except DHCP. When I tried connecting iPhone - it works: http://pastebin.com/NNEeiRLY but unfortunately some of my devices can't get IP from server, e.g. my computer: http://pastebin.com/N6LnsEWC Here's my isc configuration: http://pastebin.com/N5KQnhZV I've also tried running DHCP server as root (because of some permission denied in logs on lease file). What can I do?

  Read the article

• The Little Server that Could [Humorous Image]

  - by Asian Angel

  Anyone up for a bit of miniaturized water-skiing fun? Note: Make sure to visit the Reddit link below for some enjoyable comment reading. Would not want to go to work and find this [via Reddit - Tech Support Gore] HTG Explains: Does Your Android Phone Need an Antivirus? How To Use USB Drives With the Nexus 7 and Other Android Devices Why Does 64-Bit Windows Need a Separate “Program Files (x86)” Folder?

  Read the article

• Meego 1.0 Arrives for Linux Netbooks

  <b>Enterprise Mobile Today:</b> "MeeGo combines elements of Intel's Moblin Linux with Nokia's Maemo Linux effort into a new mobile operating system that can be used for netbooks, handheld devices and other mobile applications. The initial MeeGo 1.0 release is only available for netbooks, with a MeeGoo handset version planned for a June release."

  Read the article

• What are the costs associated with eBook publishing?

  - by Drai

  I have not found a comprehensive site that outlines costs and compares platforms for ebook development and delivery. I am interested in the costs and options available to take a single book and deliver it across multiple platforms and devices without signing up for a 3rd party service. i.e I would prefer to sign up directly with apple for iBook and Amazon for kindle than using a company that does both for me. Can anyone outline the basics?

  Read the article

• Amarok 2.3.0 "Clear Light" released

  <b>Amarok:</b> "Team Amarok is proud to announce Amarok 2.3.0. It contains many improvements and bugfixes over Amarok 2.2.2 as well as many new features. Areas such as podcast support and saved playlists have seen huge improvements, as has the support for USB mass storage devices (including generic MP3 players)."

  Read the article

• Windows Azure Media Services Launched by Microsoft

  Based on Microsoft's Windows Azure cloud, Windows Azure Media Services was created to supply content providers and media partners with cloud capabilities to accommodate and transform massive volumes of digital media into desired formats that customers can access on an on-demand basis. The service also simplifies the process of creating, managing, and delivering media to devices through the use of first-party and third-party media technologies. Numerous third-party technologies from media partners have been integrated to fall beneath the Windows Azure Media Services umbrella. For example, Asp...

  Read the article

• Wifi problems after upgrading to 13.10

  - by Simon

  I just upgraded to Ubuntu 13.10, but since the upgrade I don't have internet access via wifi anymore. I can: See networks Connect to a network Ping myself (localhost, 192.168.0.103) I can't: Ping others (including other devices on the same wireless network, including the gateway/router) Resolve hosts Access any other external resource, whether on my own network or on the internet Using Wireshark, I noticed my computer is continuously sending ARP-requests like "Who has 192.168.0.1 [which is the gateway]? Tell 192.168.0.103". It doesn't get any replies though. When I ping another IP-address for which it knows the mac-address (from cache), it turns out a packet loss of 90% occurs, and even if a packet manages to arrive it takes around 3000ms. The output of route -n is: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth1 192.168.0.0 0.0.0.0 255.255.255.0 U 9 0 0 eth1 192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0 Before upgrading, wifi worked fine. Using other devices, wifi still works fine.Resetting the router didn't help. Ethernet still works after upgrading. Any suggestions? Update: I'm using the wl driver. Here's the relevant output of some commands: lspci | grep Wireless 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01) cat /etc/modprobe.d/blacklist.conf [...] blacklist mac80211 blacklist brcm80211 blacklist cfg80211 blacklist lib80211_crypt_tkip blacklist lib80211 blacklist b43 cat /etc/rc.local sudo modprobe -r lib80211 sudo insmod /lib/modules/3.2.0-30-generic-pae/kernel/net/wireless/lib80211.ko sudo insmod /lib/modules/3.2.0-30-generic-pae/kernel/net/wireless/lib80211_crypt_wep.ko sudo insmod /lib/modules/3.2.0-30-generic-pae/kernel/net/wireless/lib80211_crypt_tkip.ko sudo insmod /lib/modules/3.2.0-30-generic-pae/kernel/net/wireless/lib80211_crypt_ccmp.ko sudo modprobe wl exit 0 The last lines are probably how I got wireless working after the previous upgrade (wireless has been a problem after each upgrade). Update 2: added information about the exact hardware below. The hardware is an integrated device, so I ran lspci -nn | grep -i network. The output is: 03:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter [14e4:4727] (rev 01)

  Read the article

• No wired and wireless connection found after upgrading 12.04

  - by ag108

  After upgrading 12.04 LTS, my wired connection works but no wireless connection found. I tried many suggestion for wireless connection on Ubuntu forum but nothing works for me. Now, maybe by mistake, I am also unable to connect Internet through wired connection. Now, (1) its says "No network devices available" and (2) in System Settings ? Hardware ? no additional driver icon is showing Please help. I don't know much about Ubuntu.

  Read the article

• vga_switcheroo and Intel HD 3000 on Ubuntu 12.04

  - by Ikalou

  I'm trying to get vga_switcheroo to enable my integrated Intel HD 3000 instead of my ATI card. My problem is that there is no vgaswitcheroo directory in /sys/kernel/debug/ on my system. > grep -i switcheroo /boot/config-3.2.0-26-generic CONFIG_VGA_SWITCHEROO=y And yet: > sudo ls /sys/kernel/debug/ acpi bdi bluetooth dri extfrag gpio ieee80211 kprobes mce mmc0 regmap regulator sched_features suspend_stats tracing usb wakeup_sources x86 I am NOT using the fglrx driver. Here is the output of lspci; glxinfo | grep renderer: 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4) 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b4) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4) 00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b4) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation QM67 Express Chipset Family LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Seymour [Radeon HD 6400M Series] 01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Caicos HDMI Audio [Radeon HD 6400 Series] 24:00.0 FireWire (IEEE 1394): JMicron Technology Corp. IEEE 1394 Host Controller (rev 30) 24:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 30) 24:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 30) 25:00.0 Network controller: Intel Corporation Centrino Advanced-N 6205 (rev 34) 26:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) OpenGL renderer string: Gallium 0.4 on AMD CAICOS Both xserver-xorg-video-intel and xserver-xorg-video-radeon packages are installed. I know there are tons of posts about hybrid-graphics already but I couldn't quite find a solution to my problem. Does anyone know why is /sys/kernel/debug/vgaswitcheroo not showing?

  Read the article

• Can casper use a squashfs in the initrd?

  - by Max Brustkern

  I've built a very large initrd containing a full squashfs from a desktop image, and used it to boot a machine over PXE. Unfortunately, casper cannot seem to locate the squashfs, since it's not present on any of the block devices it scans. Is there some way I can force it to check the initrd, or point to a filesystem location there in the bootfrom parameter? I've tried using bootfrom=/ with the casper directory in the root of the initrd, and that didn't seem to work.

  Read the article

• M2M Solutions: The Move to Value Creation and the Internet of Things

  - by Javier Puerta

  There's a new Oracle-sponsored report available around big data, specifically machine to machine data (there will probably be more growth in m2m data than human-generated stuff like social media). Forbes published an article, Big Data Set to Explode as 40 Billion New Devices Connect to Internet, which references the report. Login to Download the M2M Solutions Report Good reading!

  Read the article

• Apple driving Adobe into Android's arms?

  <b>Linux Devices:</b> "Earlier this month, an Adobe employee told Apple to go screw itself over its new restrictive developer policies for the iPhone 4.0. Now, Adobe says, it's moving on, officially focusing its Flash technology on Google's Android and other competing smartphone platforms."

  Read the article

• Facebook Adds Login Security Features

  Social networking giant rolls out a login notification service alerting users to activity on their accounts and begins asking verification questions when users log in from unfamiliar devices.

  Read the article

• How to reinstall Ubuntu keeping my data intact?

  - by explorex

  Hi, I want to reinstall Ubuntu keeping my data intact. I have 160 GB hardrive (sata or pata I don't know but it's slim and made in China) with a 40 GB ext3 partition, a 4GB swap memory and 3 other partition with a FAT32 file system. I have around 4GB space on my drive where Linux is installed. I'd like to keep the data intact, especially the Downloads folder, desktop, and /var/www; And I no longer have access to any other machines or external storage devices.

  Read the article

• Control Issues: Reviewing the Behringer BCF2000 and FCB1010

  <b>Linux Journal:</b> "This week we look at two popular MIDI control devices for use with Linux sound & music software."

  Read the article

• Resco Releases Resco MobileCRM Studio

  Bratislava, Slovakia — January 19, 2010 — Resco, a supplier of advanced developer components and tools for mobile devices, today released Resco MobileCRM Studio which is optimized for Microsoft Visual Studio 2008 and the Microsoft .NET Compact Framework 3.5

  Read the article

• Rendering projectiles

  - by Chris

  I'm working on a simple game that has the user control a space ship that shoots small circular projectiles. However, I'm not sure how to render these. Right now I know how to make a LPDIREC3DSURFACE for a sprite and render it onto a LPDIRECT3DDEVICE9, but that's only for a single sprite. I assume I don't need to constantly create new surfaces and devices. How should projectile generation/rendering be handled? Thanks in advance.

  Read the article

• Best Practices: Securing Smartphones in the Enterprise

  Whether or not corporate policy allows it, workers still bring smartphones to the office. Here, seven steps for managing personal mobile devices in an enterprise environment.

  Read the article

• Lenovo W530 microphone problem

  - by user214245

  Lenovo W530 running Xubuntu 13.10 The microphone appears not to be working. 2 tests made one with audacity and a second with skype. In both instances there appears to be no input. 'Input devices' in the volume control module, also 'recording' indicates background static only. I have opened alsamixer and ensured that everything including microphone boost is set to high. I have tried the changes to alsa-base.conf without success.

  Read the article

< Previous Page | 65 66 67 68 69 70 71 72 73 74 75 76  | Next Page >