Search Results

Search found 2709 results on 109 pages for 'digital zoom'.

Page 69/109 | < Previous Page | 65 66 67 68 69 70 71 72 73 74 75 76  | Next Page >

• X58 RAID 10 - Am I forced to use Sata2?

  - by Avi

  I'm building a new dev computer. It will be running a few VMWare Worksation virtual machines. I was advised on Serverfault to use Raid10 for performance. Raid 10 uses 4 disks. I contacted my supplier who suggested a gigabyte X58A motherboard and 4 Western Digital Caviar black 6Gb/s disks. I have checked the spec for the X58A board, however, and it says: SATA 3Gb/s: RAID 0, RAID 1, RAID 5, and RAID 10 SATA 6Gb/s: RAID 0, and RAID 1. I'm losing half the bandwidth because I'm forced to use SATA2! What should I do?

  Read the article

• 4K sectors transition: Why are hard drives moving to 4096 byte sectors, vs. 512 byte sectors?

  - by Chris W. Rea

  I've noticed that some Western Digital hard drives are now sporting 4K sectors, that is, the sectors are larger: 4096 bytes vs. the long-standing standard of 512 bytes. So: What's the big deal with 4K sectors? Is it marketing hype, or a real advantage? Why should somebody building a new PC care, or not, about 4K sectors? Why is this transition taking place now? Why didn't it happen sooner? Are there things to look out for when buying a 4K sector hard drive? e.g. incompatibility? Anything else we should know about 4K sectors?

  Read the article

• FreeNAS/ZFS/Raid-Z slightly different disks

  - by muskratt

  I'm considering using FreeNAS and "recycling" some of my older 1TB disks. Two are the exact same model Western Digital while another is Seagate and the fourth is Samsung. Typically, since all disks are not equal, I'll create my arrays on a Windows-based server 1GB undersized to prevent a replacement disk not being large enough. Dell is notorious for sending replacement SATA disks of different brand---knock on wood, no problems yet. Since not all drives are created equally and they can vary a few MBs, is there a way to make the the FreeNas/ZFS/Raid-Z function in the same way I do for my Windows-based servers above? Thanks

  Read the article

• Need hard disk recommendation for linux home server.

  - by neotracker

  Hello, I'm planing to build a little linux homeserver. It will mainly be used for storage and maybe as an media pc. I plan to build a software raid5 with 4 1.5TB or 2TB hard drives. I already decided to use the Western Digital Caviar Green 1.5 TB drive, but then I read about some problems with the WD green series about many drives failing and that they are not recommended for raid anyway. Of course, I couldn't find much facts on the issues so I thought I just ask here ;-) What hard drives would you recommended for a software raid5 setup? As I only need it for storage, the whole thing doesn't have to be too fast. So I prefer a cheap price and silence to great performance.

  Read the article

• How can you convert audio (3.5mm) to S/PDIF?

  - by SSumner

  I have a monitor that I want to use as my 'TV' for my gaming system. I connect it via HDMI, so sound and video go through the monitor, but I want sound to my headphones, which travels via optical (S/PDIF) cable. The monitor (Dell U2713HM) has a 3.5mm audio jack on it for line out, but I couldn't find anything that simply plugs in an converts the analog audio signal to a digital one so I can plug in a S/PDIF cable. What sort of device do I need to do this? (I am not asking for shopping recommendations, merely what options allow this conversion. I would prefer the smallest option, as space is limited).

  Read the article

• HDD not detected whenever first power on (detected at BIOS level)

  - by Alvin Lim

  I am using Asus P8H61-M LX Motherboard with latest version of BIOS: 4401 One SATA-3 Western Digital Black Series 1.5TB is attached to SATA port 0 A Samsung 22x DVDRW SATA drive attached to SATA Port 1. ps/2 Logitech mouse and keyboard. CPU is i3 with DDR3 8Gb RAM. no other devices are installed. My problem is that when I turn on the computer, the WD HDD is not detected. ie cannot be booted. I have to press ctrl+alt+del in order to get it detected. I'd used the WD data lifeguard software to scan the HDD, the smart status is OK, the surface scan does not show any error at all. Where did I do wrong? Any advice is greatly appreciated.

  Read the article

• Shuttle FB51 mobo does not boot with external USB drive attached [closed]

  - by user127236

  I am repurposing an old Alienware desktop as a home media server. The PC is based on the Shuttle FB51 motherboard. The BIOS is a Phoenix Version 6.00 PG, release date 12/16/2002. I have loaded Ubuntu 12.04 LTS on the internal hard drive. I am using a Western Digital WD Elements 1.5 TB USB 2.0 Desktop External Hard Drive for media storage. When the external drive is plugged in and the PC is powered on, it freezes very early in the BIOS self-test, even before it begins the memory test. If I unplug the drive, the self-test proceeds without further problems. I can plug the USB drive back in when the self-test is complete, and Ubuntu will boot and find the external drive normally. I've tried several changes to the BIOS setup without finding a cure for the boot issue. Any assistance gratefully accepted. JGB

  Read the article

• How to batch convert video files on OSX for AppleTV2 / iPhone4?

  - by Luke404

  I'd like to have a solution to batch convert video files to a format suitable for the AppleTV2, iPad2, iPhone4, while at the same time preserving as much quality as possible; I want a single output file that will play on both devices and also good for consumption by other Mac software (eg. Aperture, iMovie, iTunes). Batch processing is a requirement since I'm gonna convert many many files from different sources (mainly lots of videos captured by compact digital cameras, cell phones, and so on). I'm looking into ffmpeg and MEncoder (both installed via MacPorts), but I can't seem to find a suitable preset for libx264 even if everyone out there is talking about them. A different approach involving different software would be ok too as long as I can script it somehow and run it on a whole directory full of files to be converted.

  Read the article

• strategy /insights for avoiding document content loss due to encryption

  - by pbernatchez

  I'm about to encourage a group of people to begin using S-Mime and GPG for digital signatures and encryption. I foresee a nightmare of encrypted documents which can no longer be recovered because of lost keys. The thorniest issue is archiving. The natural way to preserve privacy in an archive is to archive the encrypted document. But that opens us up to the risk of a lost key when time comes to unarchive a document, or a forgotten password. After all it will be a long way in the future. This would be equivalent to having destroyed the document. First thought is archiving keys with documents, but that still leaves the forgotten pass phrase. Archiving the passphrase too would be tantamount to archiving in the clear. No privacy. What approaches do you use? What insights can you offer on the issue?

  Read the article

• how to protect from editing or converting to text a pdf file?

  - by Layla

  I am using a version of Ms Office of 2010, it was a beta version of public domain (I dont recall the name, but I believe it was called Blue version or something like that). I usually make my documents using the MS Word and then saving it like a pdf file using the function to publish as a pdf file within Word. The problem that I have is that some people are converting my documents into text, putting their name on it, and credited my work to them; so I would like to know if there is a way to: protect with a password the editing of my document protect it from converting into txt, with a password if its possible maybe but a digital signature in which it says my name as an author I want that the people who access it can only read it, and nothing more. I am using MS Word 2010 and Foxit Pdf (an old version), I usually do not use Adobe Acrobat. Thanks

  Read the article

• RocketRaid gives me stuttering computer

  - by Dan

  I have a SANS DIGITAL TowerRAID TR8M-BP (with the RocketRaid 622 raid device) with 5 x SAMSUNG Spinpoint F4 HD204UI 2TB 5400 RPM SATA 3.0Gb/s harddrives in a raid 5. It connects via 2-esata cables. My drivers are up to date. When I'm writing data to the drives my computer stutters (meaning freezes for a 1/2 second every 2 seconds or so). My screen freezes, my music goes into a loop, its really annoying. I get the same thing in windows 7 as I do in linux. The only difference is it seems to happen less in linux, but occassionally linux will crash (I've never had linux crash for any other reason, so I'm assuming they have poor linux drivers and kernal mod). Any tips for how to deal with this? Thanks

  Read the article

• Suggestion for live video stream aggregation/switching/forwarding/management software?

  - by deceze

  I'm looking for a software or system that can receive video streams from a number of cameras via a network (RTMP or similar protocol), present a visual overview of all video streams and allow me to forward/send a selected stream to another service (e.g. to a Flash Media Server, or anywhere via RTMP). Basically the digital internet equivalent of a TV studio control panel, which allows a director to put together a live show. Is there any such software at an affordable price? A GUI-less server which can be scripted to switch streams would be good too. I'm not even quite sure what kind of product category this falls into or what search terms to plug into Google. Most results I have come up with have little more than an executive summary description which doesn't tell me anything. Any suggestion welcome.

  Read the article

• Cannot copy anything onto WD Elements 1TB External USB HDD

  - by Aashish Vaghela

  I have a Western Digital 1023 Elements 1TB External USB HDD. Recently, it has started an unusual problem. I cannot copy any file of any size on to that 1TB hard-drive, eventhough it has more than 400 GB free (out of 931GB actual size). I tried copying movies from one friends laptop, which did not work. I also tried another desktop to copy some study material e-books (in PDF), which also did not work. I get same CRC error when I try to copy anything from a computer's hard-drive onto this WD 1TB hard-drive. Vice-versa it's working. I mean, I can copy any file from the USB HDD onto local machine's HDD on any computer. It's like one-way traffic. This HDD is only 1 year old. What are my options ? Any suggestions ? Regards, Aashish.V

  Read the article

• Windows XP 32-bit + RocketRaid 622 + 4 x 3TB = not quite a RAID setup

  - by gmoney

  I'm looking to make a 6TB RAID 10 array from my new pile of drives under Windows XP 32-bit, however they are only for auxiliary storage. After adding all the drives to an array, and initializing them XP sees only a fraction of the storage, 2TB. I'm assuming this has to do with MBR vs GPT. Is making a series of 2TB volumes and then spanning my only solution? Most questions online have to do with booting from this setup, but I'm just using them as extra storage. Hardware: 4 x 3TB Hitachi Deskstars + RocketRaid 622 + Sans Digital TR8M TowerRAID. The array is connected via eSATA.

  Read the article

• Sudden slow read & write speed on all IO

  - by user23392

  I have a custom built rig that has 2 storage drives. for OS: Western Digital 1.0TB HARD DR 64MB for other stuff: Corsair Performance 3 128GB (SSD) [ expected read speed: 400 mb/s ] The system was incredibly fast for a couple of months, then one day i was playing a game then it started to get buggy (some sounds and objects disappearing), i stopped the game and the system seemed to be unstable so i had to shut it down, next morning i couldn't start it up, it was saying something about corrupt device. I formatted both disks and installed a fresh copy of windows, all i can say that since that day the system was never like before, it takes 10 minutes to boot up (the icons and desktop slowly appear). but once it's done the slowness isn't as noticeable. Here's my benchmark on the HDD ( read speed - write speed ): And the SSD: Anyone knows what could be the issue?

  Read the article

• Extract photo stills from .vob files

  - by Eric Rath

  My parents had all the family slides scanned by a photo lab. The lab returned the digital photos on two DVDs as movies; there's some stock music over a slideshow with fades between each photo. The discs contain only a handful of files, including some very large VOB files. I'd like to extract these photos and import them into iPhoto. I saw this answer about capturing stills, and that might work if I can figure out the right offset from the beginning and the right capture rate. But this approach seems very error-prone for this purpose. Is there a better way? I wish the individual photo files were stored in a directory on the discs, but they're not there.

  Read the article

• What kind of time lapse image stitching software is out there?

  - by AaronLS

  I took a bunch of digital images(jpg format) of a sunrise that I want to make into a time lapse movie. The only recommendation I've seen was some iStopMotion for Mac, but I am running Windows. I would prefer the software to take into account the metadata in the image that indicates what time the image was taken when determining how long to display each frame, as they won't be accurately consistent in their temporal spacing. Onion skinning would be a cool feature to. Please, one software suggestion per answer to allow the voting system to do it's job. Thanks in advance.

  Read the article

• what poor management decsions have you had to deal with?

  - by tombull89

  As a junior technician I've had to deal with (or will have to deal with) some problems in the past and only being a junior technicain I don't have the confidence or respect from management staff to speak up. For instance, we're having a entirely new system. From Server 2003/XP going to Sevrer 2008 R2/Win7/VMWare/Digital Signage and the current amount of time dedicated to the training of the IT support department currently stands at 0. They seem to think that all it systems are the same and are going to get a bit of shock when I can't help them. I think there;s some UK legislation saying a school/business have to put money and time aside for training, but I'm not sure. What have you had to deal with?

  Read the article

• "Device Not Ready" when attempting to connecting an old (DOS) hard drive to windows 7

  - by Christopher Vigliotti

  I have an old Western Digital Caviar 2540 hard drive that I am attempting to connect to a Windows 7 machine by using a Bytecc BT-300 USB 2.0 to IDE/SATA Adapter. I'm connecting things in the right order (power, then sata, then usb) and the jumper settings on the drive are at present set to slave, but am still having an issue. I am recieving a message that the drive is not initialized. When I go into Computer Management I can see the drive (as "Disk 5, Unknown, Not Initialized"), but when I attempt to initialize it or right-click and select "Offline" It tells me that "the device is not ready". Is there something that I can to to get around this, connect the drive and copy the data that I need off of this drive? Is there a third party tool available that I can use?

  Read the article

• Dell eSATAp not working with some SATA disks

  - by pistache

  I have a Dell Inspiron XPS 15 (L502X) laptop, with an eSATAp port. I also have a Western Digital 1TB 3"5 SATA drive, that I'd like to use with the laptop. I bought a eSATAp <- SATA 22-pin cable (from Delock). When I use this cable my 3"5 HDD does NOT power up, no spin up. I thought that it's just this HDD taking too much power from the motherboard. However, I tested too with my 2"5 SATA HDD and it works successfully. Now the weird thing is that this 2"5 HDD takes 1.1A at 5V, and that the 3"5 HDD takes 0.7A at 5V. I don't understand why it can't work. Is there anything I could do for it to work ? What is really the problem ? Thanks for your help, Hugo

  Read the article

• What makes an Apple hard drive special?

  - by Michael Shnitzer

  The Mac Pro has a specific hard drive for sale in the Apple Store for $549.00. The drive has the following specs: Serial ATA 3GB per second 7200 RPM Amazon has a hard drive with the same specs for $169.99. The only difference I can tell is that the Apple hard drive label says it has "Apple HDD Firmware". What exactly is the benefit of this firmware and is there something I am missing that make up for the price difference in these two drives? Update: My initial comparison between the two drive was unfair. Apparently 2TB drives that are 3 GB/S and 7200 RPM are quiet a bit more than $169.99. Dell has a 2 TB SATA Caviar Black from Western Digital that is $319.99, which is closer to Apple's price.

  Read the article

• Master Boot Record

  - by Crystal

  I'm trying to understand what an MBR is. I know it is used to boot the device, like a compact flash card. If you had five 1GB CF card from SanDisk for a camera, would there be any reason for the manufacturer to have different MBRs? It seems like to me, if for some reason one CF card wouldn't boot, you could copy the MBR from a working CF card and write it to the non-working CF card. Would this MBR for a SanDisk card work on the same size Western Digital card for the same use? Thanks!

  Read the article

• Is there other usage of Comcast extension cable and splitter?

  - by Tim

  I have an unused Comcast high-speed internet self-install kit from 2006. It has two coils of extension cable, and a splitter, and some screws. The name of the cable is "extension cable" printed on the package. I wonder if that is its actual name? As ethernet cables are always useful, I wonder if the extension cables are totally worthless and should be tossed into a trash can? Or are they usable for some other purposes, or even sellable? Thanks! SVI Digital SV-2G Splitter (5/1000MHz): One interface of the cables: Screws

  Read the article

• Why is my portable WD MY PASSPORT drive is not recognized?

  - by kloop

  My "MY PASSPORT" (Western Digital) portable drive is not recognized OSx. It used to be recognized, but not anymore. It does not appear in /Volumes. The hard drive is recognized by a Linux machine. I am not sure what happened -- any ideas how to fix that? Thanks. EDIT: ` #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *750.2 GB disk0 1: EFI 209.7 MB disk0s1 2: Apple_HFS Macintosh HD 749.3 GB disk0s2 3: Apple_Boot Recovery HD 650.0 MB disk0s3 /dev/disk1 #: TYPE NAME SIZE IDENTIFIER 0: FDisk_partition_scheme *1.0 TB disk1 1: DOS_FAT_32 MY PASSPORT 1.0 TB disk1s1 `

  Read the article

• unable to format external drive to HFS+ for Mac

  - by dtlussier

  I have an external hard drive (1 TB Western Digital) that is currently formatted as FAT32 and I want to reformat it to a single partition of HFS+ for my Mac. I realize that I can read FAT32 from my Mac but want HFS as it has other feathers like permissions that I'd like to have. I have tried using Disk Utility to format the drive as I have done in the past, but when I go through the process it fails and throws out an error stating that it is unable to reformat the drive to HFS. What might be the reasons that this could happen? Are there any diagnostics I could run on the physical disk to check if it is running well?

  Read the article

< Previous Page | 65 66 67 68 69 70 71 72 73 74 75 76  | Next Page >