Search Results

Search found 3935 results on 158 pages for 'garreth 00'.

Page 69/158 | < Previous Page | 65 66 67 68 69 70 71 72 73 74 75 76  | Next Page >

  • usb_modeswitch not switching

    - by deniz
    After I upgraded from kernel 2.6.18 to 3.5.3 modeswitch started not to work for me. Although lsusb shows my usb modem, usb_modeswitch does not switch it. My system information is like below. I ran lsusb, dmesg, usb-devices and usb_modeswitch their output is like below. usb_modeswitch instead of switching my modem it says "No devices in default mode found. Nothing to do. Bye.". Can you offer a solution? Kernel: Linux 3.5.3 usb_modeswitch: 1.2.3-1 usb_modeswitch-data: 20120120-1 usbutils: 006-1 libusb: 1.0.8-0.1 root@localhost$ lsusb Bus 002 Device 029: ID 12d1:1446 Huawei Technologies Co., Ltd. root@localhost$ dmesg [70112.477080] usb 2-1.4: new high-speed USB device number 30 using ehci_hcd [70112.567757] scsi49 : usb-storage 2-1.4:1.0 [70112.567842] scsi50 : usb-storage 2-1.4:1.1 [70113.571433] scsi 49:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 [70113.572304] scsi 50:0:0:0: Direct-Access HUAWEI TF CARD Storage PQ: 0 ANSI: 2 [70113.574169] sr0: scsi-1 drive [70113.574223] sr 49:0:0:0: Attached scsi CD-ROM sr0 [70113.574250] sr 49:0:0:0: Attached scsi generic sg1 type 5 [70113.574350] sd 50:0:0:0: Attached scsi generic sg2 type 0 [70113.577173] sd 50:0:0:0: [sdb] Attached SCSI removable disk root@localhost$ usb-devices T: Bus=02 Lev=02 Prnt=02 Port=03 Cnt=01 Dev#= 30 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=12d1 ProdID=1446 Rev=00.00 S: Manufacturer=Huawei Technologies S: Product=HUAWEI Mobile C: #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage I: If#= 1 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage root@localhost$ cat /etc/usb_modeswitch.d/12d1\:1446 # Huawei, newer modems TargetVendor= 0x12d1 TargetProductList="1001,1406,140b,140c,1412,141b,1433,1436,14ac,1506" MessageContent="55534243123456780000000000000011062000000100000000000000000000" root@localhost$ usb_modeswitch -c /etc/usb_modeswitch.d/12d1:1446 -v 12d1 -p 1446 -W * usb_modeswitch: handle USB devices with multiple modes * Version 1.2.3 (C) Josua Dietze 2012 * Based on libusb0 (0.1.12 and above) ! PLEASE REPORT NEW CONFIGURATIONS ! DefaultVendor= 0x12d1 DefaultProduct= 0x1446 TargetVendor= 0x12d1 TargetProduct= not set TargetClass= not set TargetProductList="1001,1406,140b,140c,1412,141b,1433,1436,14ac,1506" DetachStorageOnly=0 HuaweiMode=0 SierraMode=0 SonyMode=0 QisdaMode=0 GCTMode=0 KobilMode=0 SequansMode=0 MobileActionMode=0 CiscoMode=0 MessageEndpoint= not set MessageContent="55534243123456780000000000000011062000000100000000000000000000" NeedResponse=0 ResponseEndpoint= not set InquireDevice enabled (default) Success check disabled System integration mode disabled usb_set_debug: Setting debugging level to 15 (on) usb_os_find_busses: Skipping non bus directory devices usb_os_find_busses: Skipping non bus directory drivers usb_os_find_busses: Skipping non bus directory uevent usb_os_find_busses: Skipping non bus directory drivers_probe usb_os_find_busses: Skipping non bus directory drivers_autoprobe Looking for target devices ... No devices in target mode or class found Looking for default devices ... No devices in default mode found. Nothing to do. Bye. Thanks in advance.

    Read the article

  • Windows XP - Security Update for Windows XP (KB923561) (KB946648) (KB956572) (KB958644)

    - by leeand00
    My father's computer has Windows XP, but when I try to install the service packs it always fails. What gives? Here are the errors that I get in the event log: Date: 2/6/2010 Time: 12:02:18 AM Type: Error User: N/A Computer: EVO Source: Windows Update Agent Category: Installation Event ID: 20 Installation Failure: Windows failed to install the following update with error 0x80070002: Security Update for Windows XP (KB946648). For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. 0000: 57 69 6e 33 32 48 52 65 Win32HRe 0008: 73 75 6c 74 3d 30 78 38 sult=0x8 0010: 30 30 37 30 30 30 32 20 0070002 0018: 55 70 64 61 74 65 49 44 UpdateID 0020: 3d 7b 38 33 44 31 41 44 ={83D1AD 0028: 46 35 2d 37 37 39 44 2d F5-779D- 0030: 34 30 31 36 2d 38 43 33 4016-8C3 0038: 31 2d 35 34 39 32 37 30 1-549270 0040: 46 36 37 42 33 46 7d 20 F67B3F} 0048: 52 65 76 69 73 69 6f 6e Revision 0050: 4e 75 6d 62 65 72 3d 31 Number=1 0058: 30 34 20 00 04 . Date: 2/6/2010 Time: 12:02:18 AM Type: Error User: N/A Computer: EVO Source: Windows Update Agent Catagory: Installation Event ID: 20 Installation Failure: Windows failed to install the following update with error 0x80070002: Security Update for Windows XP (KB956572). For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. 0000: 57 69 6e 33 32 48 52 65 Win32HRe 0008: 73 75 6c 74 3d 30 78 38 sult=0x8 0010: 30 30 37 30 30 30 32 20 0070002 0018: 55 70 64 61 74 65 49 44 UpdateID 0020: 3d 7b 44 46 32 46 30 41 ={DF2F0A 0028: 39 38 2d 36 45 33 35 2d 98-6E35- 0030: 34 33 37 39 2d 41 42 33 4379-AB3 0038: 33 2d 41 30 33 30 33 45 3-A0303E 0040: 46 37 34 42 32 41 7d 20 F74B2A} 0048: 52 65 76 69 73 69 6f 6e Revision 0050: 4e 75 6d 62 65 72 3d 31 Number=1 0058: 30 32 20 00 02 . Date: 2/6/2010 Time: 12:02:18 AM Type: Error User: N/A Computer EVO Source: Windows Update Agent Event ID: 20 Installation Failure: Windows failed to install the following update with error 0x80070002: Security Update for Windows XP (KB958644). For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. 0000: 57 69 6e 33 32 48 52 65 Win32HRe 0008: 73 75 6c 74 3d 30 78 38 sult=0x8 0010: 30 30 37 30 30 30 32 20 0070002 0018: 55 70 64 61 74 65 49 44 UpdateID 0020: 3d 7b 39 33 39 37 41 32 ={9397A2 0028: 31 46 2d 32 34 36 43 2d 1F-246C- 0030: 34 35 33 42 2d 41 43 30 453B-AC0 0038: 35 2d 36 35 42 46 34 46 5-65BF4F 0040: 43 36 42 36 38 42 7d 20 C6B68B} 0048: 52 65 76 69 73 69 6f 6e Revision 0050: 4e 75 6d 62 65 72 3d 31 Number=1 0058: 30 31 20 00 01 . Date: 2/6/2010 Time: 12:02:18 AM Type: Error User: N/A Computer: EVO Source: Windows Update Agent Category: Installation Event ID: 20 Installation Failure: Windows failed to install the following update with error 0x80070002: Security Update for Windows XP (KB923561). For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. 0000: 57 69 6e 33 32 48 52 65 Win32HRe 0008: 73 75 6c 74 3d 30 78 38 sult=0x8 0010: 30 30 37 30 30 30 32 20 0070002 0018: 55 70 64 61 74 65 49 44 UpdateID 0020: 3d 7b 33 31 30 41 34 43 ={310A4C 0028: 30 38 2d 35 39 33 44 2d 08-593D- 0030: 34 31 41 33 2d 42 42 35 41A3-BB5 0038: 37 2d 38 33 42 33 38 36 7-83B386 0040: 44 37 37 33 42 35 7d 20 D773B5} 0048: 52 65 76 69 73 69 6f 6e Revision 0050: 4e 75 6d 62 65 72 3d 31 Number=1 0058: 30 33 20 00 03 . Thank you, Andrew

    Read the article

  • Configuring Jenkins for running with BitBucket

    - by Claus
    I'm trying to setup Jenkins on my mac mini in order to pull my iOS project source code from BitBucket and build it automatically. I've already gone through the major well know problems generating the ssh keys,uploading them in BitBucket,performing an ssh connection by console for adding the host to the well know list (you can find all my adventure here and here). Now,there are 3 user in my system: A,B and Shared. When I installed Jenkins it automatically placed itself in Shared, but I generated the ssh keys with the user A. So just to be clear In the A home directory there is an .ssh directory with public and private keys. When I try to run by Jenkins job I get this error message: Started by user anonymous Building in workspace /Users/Shared/Jenkins/Home/jobs/myprojectAdHocBuild/workspace Checkout:workspace / /Users/Shared/Jenkins/Home/jobs/myprojectAdHocBuild/workspace - hudson.remoting.LocalChannel@625cb0bb Using strategy: Default Cloning the remote Git repository Cloning repository [email protected]:myuser/myproject.git git --version git version 1.8.0 ERROR: Error cloning remote repo 'origin' : Could not clone [email protected]:myuser/myproject.git hudson.plugins.git.GitException: Could not clone [email protected]:myuser/myproject.git at hudson.plugins.git.GitAPI.clone(GitAPI.java:271) at hudson.plugins.git.GitSCM$2.invoke(GitSCM.java:1036) at hudson.plugins.git.GitSCM$2.invoke(GitSCM.java:978) at hudson.FilePath.act(FilePath.java:851) at hudson.FilePath.act(FilePath.java:824) at hudson.plugins.git.GitSCM.determineRevisionToBuild(GitSCM.java:978) at hudson.plugins.git.GitSCM.checkout(GitSCM.java:1134) at hudson.model.AbstractProject.checkout(AbstractProject.java:1325) at hudson.model.AbstractBuild$AbstractBuildExecution.defaultCheckout(AbstractBuild.java:676) at jenkins.scm.SCMCheckoutStrategy.checkout(SCMCheckoutStrategy.java:88) at hudson.model.AbstractBuild$AbstractBuildExecution.run(AbstractBuild.java:581) at hudson.model.Run.execute(Run.java:1516) at hudson.model.FreeStyleBuild.run(FreeStyleBuild.java:46) at hudson.model.ResourceController.execute(ResourceController.java:88) at hudson.model.Executor.run(Executor.java:236) Caused by: hudson.plugins.git.GitException: Command "/usr/local/git/bin/git clone --progress -o origin [email protected]:myuser/myproject.git /Users/Shared/Jenkins/Home/jobs/myprojectAdHocBuild/workspace" returned status code 128: stdout: Cloning into '/Users/Shared/Jenkins/Home/jobs/myprojectAdHocBuild/workspace'... stderr: Host key verification failed. fatal: Could not read from remote repository. Please make sure you have the correct access rights and the repository exists. at hudson.plugins.git.GitAPI.launchCommandIn(GitAPI.java:885) at hudson.plugins.git.GitAPI.access$000(GitAPI.java:40) at hudson.plugins.git.GitAPI$1.invoke(GitAPI.java:267) at hudson.plugins.git.GitAPI$1.invoke(GitAPI.java:246) at hudson.FilePath.act(FilePath.java:851) at hudson.FilePath.act(FilePath.java:824) at hudson.plugins.git.GitAPI.clone(GitAPI.java:246) ... 14 more Trying next repository ERROR: Could not clone repository FATAL: Could not clone hudson.plugins.git.GitException: Could not clone at hudson.plugins.git.GitSCM$2.invoke(GitSCM.java:1048) at hudson.plugins.git.GitSCM$2.invoke(GitSCM.java:978) at hudson.FilePath.act(FilePath.java:851) at hudson.FilePath.act(FilePath.java:824) at hudson.plugins.git.GitSCM.determineRevisionToBuild(GitSCM.java:978) at hudson.plugins.git.GitSCM.checkout(GitSCM.java:1134) at hudson.model.AbstractProject.checkout(AbstractProject.java:1325) at hudson.model.AbstractBuild$AbstractBuildExecution.defaultCheckout(AbstractBuild.java:676) at jenkins.scm.SCMCheckoutStrategy.checkout(SCMCheckoutStrategy.java:88) at hudson.model.AbstractBuild$AbstractBuildExecution.run(AbstractBuild.java:581) at hudson.model.Run.execute(Run.java:1516) at hudson.model.FreeStyleBuild.run(FreeStyleBuild.java:46) at hudson.model.ResourceController.execute(ResourceController.java:88) at hudson.model.Executor.run(Executor.java:236) As you can see it fails when Hudson try to run the GIT command. The odd things is that if I try to run /usr/local/git/bin/git clone --progress -o origin [email protected]:myuser/myproject.git /Users/Shared/Jenkins/Home/jobs/myprojectAdHocBuild/workspace In my console, it works fine (after fixing a small problem relative the folder write permission with chmod) I found a post reporting a similar error which names a number of possible options but I'm not sure how to perform correctly these operations on my console. It looks like Jenkins is trying to run a command with a user which doesn't have permission to retrieve the appropriate keys from my .ssh directory.Not really sure.Maybe this output can help: MacMini:~ myuser$ ps axu | grep "/jenkins" myuser 11660 0.0 4.6 2918124 97096 ?? S 6:59pm 1:05.63 /usr/bin/java -jar /Users/myuser/Library/Caches/org.jenkins-ci.jenkins/jenkins.war jenkins 9896 0.0 9.0 2939824 188552 ?? Ss 4:06pm 17:55.91 /usr/bin/java -jar /Applications/Jenkins/jenkins.war myuser 11930 0.0 0.0 2432768 588 s000 S+ 10:28am 0:00.00 grep /jenkins MacMini:~ myuser$ ps axu | grep tomcat myuser 11932 0.0 0.0 2432768 588 s000 S+ 10:28am 0:00.00 grep tomcat MacMini:~ myuser$ I really hope to fix this problem, because I would like to write a very detailed tutorial with all the information I found disseminated around the web.

    Read the article

  • How do I stop and repair a RAID 5 array that has failed and has I/O pending?

    - by Ben Hymers
    The short version: I have a failed RAID 5 array which has a bunch of processes hung waiting on I/O operations on it; how can I recover from this? The long version: Yesterday I noticed Samba access was being very sporadic; accessing the server's shares from Windows would randomly lock up explorer completely after clicking on one or two directories. I assumed it was Windows being a pain and left it. Today the problem is the same, so I did a little digging; the first thing I noticed was that running ps aux | grep smbd gives a lot of lines like this: ben 969 0.0 0.2 96088 4128 ? D 18:21 0:00 smbd -F root 1708 0.0 0.2 93468 4748 ? Ss 18:44 0:00 smbd -F root 1711 0.0 0.0 93468 1364 ? S 18:44 0:00 smbd -F ben 3148 0.0 0.2 96052 4160 ? D Mar07 0:00 smbd -F ... There are a lot of processes stuck in the "D" state. Running ps aux | grep " D" shows up some other processes including my nightly backup script, all of which need to access the volume mounted on my RAID array at some point. After some googling, I found that it might be down to the RAID array failing, so I checked /proc/mdstat, which shows this: ben@jack:~$ cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid5 sdb1[3](F) sdc1[1] sdd1[2] 2930271872 blocks level 5, 64k chunk, algorithm 2 [3/2] [_UU] unused devices: <none> And running mdadm --detail /dev/md0 gives this: ben@jack:~$ sudo mdadm --detail /dev/md0 /dev/md0: Version : 00.90 Creation Time : Sat Oct 31 20:53:10 2009 Raid Level : raid5 Array Size : 2930271872 (2794.53 GiB 3000.60 GB) Used Dev Size : 1465135936 (1397.26 GiB 1500.30 GB) Raid Devices : 3 Total Devices : 3 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Mon Mar 7 03:06:35 2011 State : active, degraded Active Devices : 2 Working Devices : 2 Failed Devices : 1 Spare Devices : 0 Layout : left-symmetric Chunk Size : 64K UUID : f114711a:c770de54:c8276759:b34deaa0 Events : 0.208245 Number Major Minor RaidDevice State 3 8 17 0 faulty spare rebuilding /dev/sdb1 1 8 33 1 active sync /dev/sdc1 2 8 49 2 active sync /dev/sdd1 I believe this says that sdb1 has failed, and so the array is running with two drives out of three 'up'. Some advice I found said to check /var/log/messages for notices of failures, and sure enough there are plenty: ben@jack:~$ grep sdb /var/log/messages ... Mar 7 03:06:35 jack kernel: [4525155.384937] md/raid:md0: read error NOT corrected!! (sector 400644912 on sdb1). Mar 7 03:06:35 jack kernel: [4525155.389686] md/raid:md0: read error not correctable (sector 400644920 on sdb1). Mar 7 03:06:35 jack kernel: [4525155.389686] md/raid:md0: read error not correctable (sector 400644928 on sdb1). Mar 7 03:06:35 jack kernel: [4525155.389688] md/raid:md0: read error not correctable (sector 400644936 on sdb1). Mar 7 03:06:56 jack kernel: [4525176.231603] sd 0:0:1:0: [sdb] Unhandled sense code Mar 7 03:06:56 jack kernel: [4525176.231605] sd 0:0:1:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Mar 7 03:06:56 jack kernel: [4525176.231608] sd 0:0:1:0: [sdb] Sense Key : Medium Error [current] [descriptor] Mar 7 03:06:56 jack kernel: [4525176.231623] sd 0:0:1:0: [sdb] Add. Sense: Unrecovered read error - auto reallocate failed Mar 7 03:06:56 jack kernel: [4525176.231627] sd 0:0:1:0: [sdb] CDB: Read(10): 28 00 17 e1 5f bf 00 01 00 00 To me it is clear that device sdb has failed, and I need to stop the array, shutdown, replace it, reboot, then repair the array, bring it back up and mount the filesystem. I cannot hot-swap a replacement drive in, and don't want to leave the array running in a degraded state. I believe I am supposed to unmount the filesystem before stopping the array, but that is failing, and that is where I'm stuck now: ben@jack:~$ sudo umount /storage umount: /storage: device is busy. (In some cases useful info about processes that use the device is found by lsof(8) or fuser(1)) It is indeed busy; there are some 30 or 40 processes waiting on I/O. What should I do? Should I kill all these processes and try again? Is that a wise move when they are 'uninterruptable'? What would happen if I tried to reboot? Please let me know what you think I should do. And please ask if you need any extra information to diagnose the problem or to help!

    Read the article

  • Setting up Edimax EW-7206APg as Universal Repeater

    - by Ondra Žižka
    Hi, I've troubles setting up Edimax EW-7206APg as a Universal Repeater. I've read few manuals, but they are unclear on certain points. I've managed the repeater to get to a state when it's in a "connected" state. I've set the same WPA passphrase as the router has because I haven't seen any other place to set it at. These are my settings: System Uptime 0day:1h:33m:11s Hardware Version Rev. A Runtime Code Version 1.32 Wireless Configuration Mode Universal Repeater ESSID edimax Channel Number 6 Security WPA-shared key BSSID 00:c0:9f:40:bd:38 Associated Clients 0 Wireless Repeater Interface Configuration ESSID Dusan Security WPA BSSID 00:4f:62:23:8f:7e State Connected LAN Configuration IP Address 192.168.0.10 Subnet Mask 255.255.255.0 Default Gateway 192.168.0.1 MAC Address 00:c0:9f:40:bd:37 This is ipconfig /all: Prípona DNS podle pripojení . . . : riomail.cz Popis . . . . . . . . . . . . . . : Intel(R) PRO/Wireless 2200BG Network Connection Fyzická Adresa. . . . . . . . . . : 00-0E-35-3D-77-68 Protokol DHCP povolen . . . . . . : Ano Automatická konfigurace povolena : Ano Adresa IP . . . . . . . . . . . . : 192.168.0.5 Maska podsíte . . . . . . . . . . : 255.255.255.0 Výchozí brána . . . . . . . . . . : 192.168.0.1 Server DHCP . . . . . . . . . . . : 192.168.0.1 Servery DNS . . . . . . . . . . . : 94.74.192.252 94.74.192.244 I can ping the repeater, I can ping the root AP, but not a DNS server or any other IP beyond the root AP. Anyone has an idea what's wrong? Thanks, Ondra

    Read the article

  • Does Apache ever give incorrect "out of threads" errors?

    - by Eli Courtwright
    Lately our Apache web server has been giving us this error multiple times per day: [Tue Apr 06 01:07:10 2010] [error] Server ran out of threads to serve requests. Consider raising the ThreadsPerChild setting We raised our ThreadsPerChild setting from 50 to 100, but we still get the error. Our access logs indicate that these errors never even happen at periods of high load. For example, here's an excerpt from our access log (ip addresses and some urls are edited for privacy). As you can see, the above error happened at 1:07 and only a small handful of requests occurred in the several minutes leading up to the error: 99.88.77.66 - - [06/Apr/2010:00:59:33 -0400] "GET /WebRepository/jquery/jquery-ui-1.7.1.custom/css/smoothness/images/ui-icons_222222_256x240.png HTTP/1.1" 304 - 99.88.77.66 - - [06/Apr/2010:00:59:34 -0400] "GET /WebRepository/jquery/jquery-ui-1.7.1.custom/css/smoothness/images/ui-bg_glass_75_dadada_1x400.png HTTP/1.1" 200 111 99.88.77.66 - - [06/Apr/2010:00:59:34 -0400] "GET /WebRepository/jquery/jquery-ui-1.7.1.custom/css/smoothness/images/ui-bg_glass_75_dadada_1x400.png HTTP/1.1" 200 111 99.88.77.66 - mpeu [06/Apr/2010:00:59:40 -0400] "GET /some/dynamic/content HTTP/1.1" 200 145049 55.44.33.22 - mpeu [06/Apr/2010:01:06:56 -0400] "GET /other/dynamic/content HTTP/1.1" 200 12311 55.44.33.22 - - [06/Apr/2010:01:06:56 -0400] "GET /WebRepository/jquery/jquery-ui-1.7.1.custom/css/smoothness/jquery-ui-1.7.1.custom.css HTTP/1.1" 304 - 55.44.33.22 - - [06/Apr/2010:01:06:56 -0400] "GET /WebRepository/jquery/jquery-ui-1.7.1.custom/js/jquery-1.3.2.min.js HTTP/1.1" 304 - 55.44.33.22 - - [06/Apr/2010:01:06:56 -0400] "GET /WebRepository/jquery/jquery-ui-1.7.1.custom/js/jquery-ui-1.7.1.custom.min.js HTTP/1.1" 304 - 55.44.33.22 - - [06/Apr/2010:01:06:56 -0400] "GET /WebRepository/jquery.tablesorter.min.js HTTP/1.1" 304 - 55.44.33.22 - - [06/Apr/2010:01:06:56 -0400] "GET /WebRepository/date.js HTTP/1.1" 304 - 55.44.33.22 - - [06/Apr/2010:01:06:56 -0400] "GET /WebRepository/pdfs/image1.gif HTTP/1.1" 304 - 55.44.33.22 - - [06/Apr/2010:01:06:56 -0400] "GET /WebRepository/pdfs/image2.png HTTP/1.1" 304 - 55.44.33.22 - - [06/Apr/2010:01:06:56 -0400] "GET /WebRepository/pdfs/image3.png HTTP/1.1" 304 - 55.44.33.22 - - [06/Apr/2010:01:06:56 -0400] "GET /WebRepository/pdfs/image4.png HTTP/1.1" 304 - 55.44.33.22 - - [06/Apr/2010:01:06:56 -0400] "GET /WebRepository/pdfs/image5.png HTTP/1.1" 304 - 55.44.33.22 - - [06/Apr/2010:01:06:56 -0400] "GET /WebRepository/pdfs/image6.png HTTP/1.1" 304 - 55.44.33.22 - - [06/Apr/2010:01:06:56 -0400] "GET /WebRepository/pdfs/image7.png HTTP/1.1" 304 - 55.44.33.22 - - [06/Apr/2010:01:06:57 -0400] "GET /WebRepository/pdfs/image8.png HTTP/1.1" 304 - 55.44.33.22 - - [06/Apr/2010:01:06:57 -0400] "GET /WebRepository/pdfs/image9.png HTTP/1.1" 304 - 55.44.33.22 - - [06/Apr/2010:01:06:57 -0400] "GET /WebRepository/pdfs/imageA.png HTTP/1.1" 304 - 55.44.33.22 - - [06/Apr/2010:01:06:57 -0400] "GET /WebRepository/jquery/jquery-ui-1.7.1.custom/css/smoothness/images/ui-bg_flat_75_ffffff_40x100.png HTTP/1.1" 304 - 55.44.33.22 - - [06/Apr/2010:01:06:59 -0400] "GET /WebRepository/jquery/jquery-ui-1.7.1.custom/css/smoothness/images/ui-bg_highlight-soft_75_cccccc_1x100.png HTTP/1.1" 304 - 55.44.33.22 - - [06/Apr/2010:01:06:59 -0400] "GET /WebRepository/jquery/jquery-ui-1.7.1.custom/css/smoothness/images/ui-bg_glass_75_e6e6e6_1x400.png HTTP/1.1" 200 110 55.44.33.22 - - [06/Apr/2010:01:06:59 -0400] "GET /WebRepository/jquery/jquery-ui-1.7.1.custom/css/smoothness/images/ui-bg_glass_75_e6e6e6_1x400.png HTTP/1.1" 200 110 11.22.33.44 - mpeu [06/Apr/2010:01:18:03 -0400] "GET /other/dynamic/content HTTP/1.1" 200 12311 11.22.33.44 - - [06/Apr/2010:01:18:03 -0400] "GET /WebRepository/jquery/jquery-ui-1.7.1.custom/js/jquery-1.3.2.min.js HTTP/1.1" 304 - 11.22.33.44 - - [06/Apr/2010:01:18:04 -0400] "GET /WebRepository/jquery/jquery-ui-1.7.1.custom/css/smoothness/jquery-ui-1.7.1.custom.css HTTP/1.1" 200 27374 11.22.33.44 - - [06/Apr/2010:01:18:04 -0400] "GET /WebRepository/jquery/jquery-ui-1.7.1.custom/js/jquery-ui-1.7.1.custom.min.js HTTP/1.1" 304 - 11.22.33.44 - - [06/Apr/2010:01:18:04 -0400] "GET /WebRepository/jquery.tablesorter.min.js HTTP/1.1" 200 12795 11.22.33.44 - - [06/Apr/2010:01:18:04 -0400] "GET /WebRepository/date.js HTTP/1.1" 200 25809 For what it's worth, we're running the version of Apache that ships with Oracle 10g (some 2.0 version), and we're using mod_plsql to generate our dynamic content. Since the Apache server runs as a separate process and the database doesn't record any problems when this error occurs, I'm doubtful that Oracle is the problem. Unfortunately, the errors are freaking out our sysadmins, who are inclined to blame any and all problems which occur with the server on this error. Is this a known bug in Apache that I simply haven't been able to find any reference to through Google?

    Read the article

  • Auth-Type :- Reject in RADIUS users file matches inner tunnel request but sends Access-Accept

    - by mgorven
    I have WPA2 802.11x EAP authentication setup using FreeRADIUS 2.1.8 on Ubuntu 10.04.4 talking to OpenLDAP, and can successfully authenticate using PEAP/MSCHAPv2, TTLS/MSCHAPv2 and TTLS/PAP (both via the AP and using eapol_test). I am now trying to restrict access to specific SSIDs based on the LDAP groups which the user belongs to. I have configured group membership checking in /etc/freeradius/modules/ldap like so: groupname_attribute = cn groupmembership_filter = "(|(&(objectClass=posixGroup)(memberUid=%{User-Name}))(&(objectClass=posixGroup)(uniquemember=%{User-Name})))" and I have configured extraction of the SSID from Called-Station-Id into Called-Station-SSID based on the Mac Auth wiki page. In /etc/freeradius/eap.conf I have enabled copying attributes from the outer tunnel into the inner tunnel, and usage of the inner tunnel response in the outer tunnel (for both PEAP and TTLS). I had the same behaviour before changing these options however. copy_request_to_tunnel = yes use_tunneled_reply = yes I'm running eapol_test like this to test the setup: eapol_test -c peap-mschapv2.conf -a 172.16.0.16 -s testing123 -N 30:s:01-23-45-67-89-01:Example-EAP with the following peap-mschapv2.conf file: network={ ssid="Example-EAP" key_mgmt=WPA-EAP eap=PEAP identity="mgorven" anonymous_identity="anonymous" password="foobar" phase2="autheap=MSCHAPV2" } With the following in /etc/freeradius/users: DEFAULT Ldap-Group == "employees" and running freeradius-Xx, I can see that the LDAP group retrieval works, and that the SSID is extracted. Debug: [ldap] performing search in dc=example,dc=com, with filter (&(cn=employees)(|(&(objectClass=posixGroup)(memberUid=mgorven))(&(objectClass=posixGroup)(uniquemember=mgorven)))) Debug: rlm_ldap::ldap_groupcmp: User found in group employees ... Info: expand: %{7} -> Example-EAP Next I try to only allow access to users in the employees group (regardless of SSID), so I put the following in /etc/freeradius/users: DEFAULT Ldap-Group == "employees" DEFAULT Auth-Type := Reject But this immediately rejects the Access-Request in the outer tunnel because the anonymous user is not in the employees group. So I modify it to only match inner tunnel requests like so: DEFAULT Ldap-Group == "employees" DEFAULT FreeRADIUS-Proxied-To == "127.0.0.1" Auth-Type := Reject, Reply-Message = "User does not belong to any groups which may access this SSID." Now users which are in the employees group are authenticated, but so are users which are not in the employees group. I see the reject entry being matched, and the Reply-Message is set, but the client receives an Access-Accept. Debug: rlm_ldap::ldap_groupcmp: Group employees not found or user is not a member. Info: [files] users: Matched entry DEFAULT at line 209 Info: ++[files] returns ok ... Auth: Login OK: [mgorven] (from client test port 0 cli 02-00-00-00-00-01 via TLS tunnel) Info: WARNING: Empty section. Using default return values. ... Info: [peap] Got tunneled reply code 2 Auth-Type := Reject Reply-Message = "User does not belong to any groups which may access this SSID." ... Info: [peap] Got tunneled reply RADIUS code 2 Auth-Type := Reject Reply-Message = "User does not belong to any groups which may access this SSID." ... Info: [peap] Tunneled authentication was successful. Info: [peap] SUCCESS Info: [peap] Saving tunneled attributes for later ... Sending Access-Accept of id 11 to 172.16.2.44 port 60746 Reply-Message = "User does not belong to any groups which may access this SSID." User-Name = "mgorven" and eapol_test reports: RADIUS message: code=2 (Access-Accept) identifier=11 length=233 Attribute 18 (Reply-Message) length=64 Value: 'User does not belong to any groups which may access this SSID.' Attribute 1 (User-Name) length=9 Value: 'mgorven' ... SUCCESS Why isn't the request being rejected, and is this the right way to implement this?

    Read the article

  • Duplicate DNS Zones (Error 4515 in Event Log )

    - by Campo
    I am getting these two error in the DNS Event log (errors at end of question). I have confirmed I do have duplicate zones. I am wondering which ones to delete. The DomainDNSZone contains all of our DNS records but it does not have the _msdcs zone.... that is in the ForestDNSZone with the duplicates that are not in use. here is a picture of that 3 Questions. I understand the advantages of having DNS in the ForestDNSZone. so... Why is DNS using the DomainDNSZone and is that acceptable considering _msdcs... is in the ForestDNSZone? If so, should I just delete the DC=1.168.192.in-addr.arpa and DC=supernova.local from the ForestDNSZone? Or should I try to get those to be the ones in use? What are those steps? I understand how to delete. That is simple but if i must move zones some info would be appreaciated there. Just to confirm. from my understanding. I can delete the two duplicates in the ForestDNSZone and leave the _msdcs.supernova.local as thats required there. This will resolve the erros I see. Just fyi when I look in those folders from the ForestDNSZone they have just 2 and 1 entries respectively. So obviously not in use compared to the others. I am pretty sure I understand the steps to complete this. But if you would like to provide that info, bonus points! Event Type: Warning Event Source: DNS Event Category: None Event ID: 4515 Date: 1/4/2011 Time: 2:14:18 PM User: N/A Computer: STANLEY Description: The zone 1.168.192.in-addr.arpa was previously loaded from the directory partition DomainDnsZones.supernova.local but another copy of the zone has been found in directory partition ForestDnsZones.supernova.local. The DNS Server will ignore this new copy of the zone. Please resolve this conflict as soon as possible. If an administrator has moved this zone from one directory partition to another this may be a harmless transient condition. In this case, no action is necessary. The deletion of the original copy of the zone should soon replicate to this server. If there are two copies of this zone in two different directory partitions but this is not a transient caused by a zone move operation then one of these copies should be deleted as soon as possible to resolve this conflict. To change the replication scope of an application directory partition containing DNS zones and for more details on storing DNS zones in the application directory partitions, please see Help and Support. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 89 25 00 00 %.. AND Event Type: Warning Event Source: DNS Event Category: None Event ID: 4515 Date: 1/4/2011 Time: 2:14:18 PM User: N/A Computer: STANLEY Description: The zone supernova.local was previously loaded from the directory partition DomainDnsZones.supernova.local but another copy of the zone has been found in directory partition ForestDnsZones.supernova.local. The DNS Server will ignore this new copy of the zone. Please resolve this conflict as soon as possible. If an administrator has moved this zone from one directory partition to another this may be a harmless transient condition. In this case, no action is necessary. The deletion of the original copy of the zone should soon replicate to this server. If there are two copies of this zone in two different directory partitions but this is not a transient caused by a zone move operation then one of these copies should be deleted as soon as possible to resolve this conflict. To change the replication scope of an application directory partition containing DNS zones and for more details on storing DNS zones in the application directory partitions, please see Help and Support. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 89 25 00 00 %..

    Read the article

  • Centos/OVH: public IP on KVM virtual machine

    - by Sébastien
    Since a few days, I'm trying to configure my KVM vm to have a public IP address, without any success. First, I'm on OVH, and you need to know they don't allow networking from different mac addresses. I have so registered a virtual mac address associated with my failover IP Here's my configuration: Guest wanted IP: 46.105.40.x Host IP: 176.31.240.x Host configuration dummy0 interface: ifcfg-dummy0 BOOTPROTO=static IPADDR=10.0.0.1 NETMASK=255.0.0.0 ONBOOT=yes NM_CONTROLLED=no ARP=yes BRIDGE=br0 br0 bridge: ifcfg-br0 DEVICE=br0 TYPE=Bridge DELAY=0 ONBOOT=yes BOOTPROTO=static IPADDR=192.168.1.1 NETMASK=255.255.255.0 PEERDNS=yes NM_CONTROLLED=no ARP=yes Failover ip is redirected to the br0 bridge with ip route add 46.105.40.xxx dev br0 > cat /proc/sys/net/ipv4/ip_forward 1 > cat /proc/sys/net/ipv4/conf/vnet0/proxy_arp 1 > route -n Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 176.31.240.254 0.0.0.0 UG 0 0 0 eth0 46.105.40.x 0.0.0.0 255.255.255.255 UH 0 0 0 br0 176.31.240.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 br0 Guest configuration: KVM: <interface type='bridge'> <mac address='02:00:00:30:22:05'/> <source bridge='br0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> </interface> I've borrowed most of the OVH configuration here (in french, http://guides.ovh.com/BridgeClient) for the guest configuration eth0 interface: ifcfg-eth0 DEVICE="eth0" BOOTPROTO=none HWADDR="02:00:00:30:22:05" NM_CONTROLLED="yes" ONBOOT="yes" TYPE="Ethernet" UUID="e9138469-0d81-4ee6-b5ab-de0d7d17d1c8" USERCTL=no PEERDNS=yes IPADDR=46.105.40.xxx NETMASK=255.255.255.255 GATEWAY=176.31.240.254 ARP=yes For the routes, I have in route-eth0: 176.31.240.254 dev eth0 default via 176.31.240.254 dev eth0 With this configuration, I don't have any access to the internet. The only thing I can do is to ping the public ip of the host, nothing more. My final conclusion is that the route does not work, because, when, on the guest, I run ping 8.8.8.8, I have, on the host: > tcpdump -i vnet0 icmp tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on br0, link-type EN10MB (Ethernet), capture size 65535 bytes 13:38:09.009324 IP 46-105-40-xxx.kimsufi.com > google-public-dns-a.google.com: ICMP echo request, id 50183, seq 1, length 64 13:38:09.815344 IP 46-105-40-xxx.kimsufi.com > google-public-dns-a.google.com: ICMP echo request, id 50183, seq 2, length 64 I never get the ping reply, only the request. It seems Guest - Host communication is fine. On eth0: > tcpdump -i eth0 icmp tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes 13:39:40.240561 IP 46-105-40-xxx.kimsufi.com > google-public-dns-a.google.com: ICMP echo request, id 50439, seq 1, length 64 13:39:40.250161 IP google-public-dns-a.google.com > 46-105-40-xxx.kimsufi.com: ICMP echo reply, id 50439, seq 1, length 64 I have the request and the reply on eth0, but reply is not forwarded to the bridge. I really don't understand why, I though it was the aim of the route to do that! IPtables is disabled on both host and guest. I really hope some of you will be able to help me! Many thanks in advance, Sébastien

    Read the article

  • Slow disk transfer rate

    - by Nooklez
    I have problem with slow disk transfer rate. It's static files server for our website. I was making backup of data and noticed that tar is very slow. So I did hdparm -t and... hdparm -t /dev/sda3 /dev/sda3: Timing buffered disk reads: 6 MB in 4.70 seconds = 1.28 MB/sec It's low traffic hour now on our site, so huge I/O traffic is not a reason (iotop show less than 1 MB/s). It's RAID10 setup (2x2 SATA drives). Unit UnitType Status %RCmpl %V/I/M Stripe Size(GB) Cache AVrfy ------------------------------------------------------------------------------ u0 RAID-10 OK - - 64K 1396.96 W ON VPort Status Unit Size Type Phy Encl-Slot Model ------------------------------------------------------------------------------ p0 OK u0 698.63 GB SATA 0 - WDC WD7500AADS-00M2 p1 OK u0 698.63 GB SATA 1 - WDC WD7500AADS-00M2 p2 OK u0 698.63 GB SATA 2 - WDC WD7500AADS-00M2 p3 OK u0 698.63 GB SATA 3 - WDC WD7500AADS-00M2 We have recently changed almost all components of server (excluding 3ware controller + disks). And I think problems started since then. Can it be configuration problem or hardware? EDIT: I found something like that in dmesg [166843.625843] irq 16: nobody cared (try booting with the "irqpoll" option) [166843.625846] Pid: 0, comm: swapper Not tainted 3.1.5-gentoo #3 [166843.625847] Call Trace: [166843.625848] <IRQ> [<ffffffff810859d5>] __report_bad_irq+0x35/0xc1 [166843.625856] [<ffffffff81085cec>] note_interrupt+0x165/0x1e1 [166843.625859] [<ffffffff8108445f>] handle_irq_event_percpu+0x16f/0x187 [166843.625861] [<ffffffff810844a9>] handle_irq_event+0x32/0x51 [166843.625863] [<ffffffff8108640b>] handle_fasteoi_irq+0x75/0x99 [166843.625866] [<ffffffff810039d7>] handle_irq+0x83/0x8b [166843.625868] [<ffffffff810036ad>] do_IRQ+0x48/0xa0 [166843.625871] [<ffffffff8155082b>] common_interrupt+0x6b/0x6b [166843.625872] <EOI> [<ffffffff812981e8>] ? acpi_safe_halt+0x22/0x35 [166843.625877] [<ffffffff812981e2>] ? acpi_safe_halt+0x1c/0x35 [166843.625879] [<ffffffff81298216>] acpi_idle_do_entry+0x1b/0x2b [166843.625881] [<ffffffff81298276>] acpi_idle_enter_c1+0x50/0x99 [166843.625884] [<ffffffff813b792a>] cpuidle_idle_call+0xed/0x171 [166843.625886] [<ffffffff81001257>] cpu_idle+0x55/0x81 [166843.625888] [<ffffffff81532a69>] rest_init+0x6d/0x6f [166843.625891] [<ffffffff81aa1aca>] start_kernel+0x329/0x334 [166843.625893] [<ffffffff81aa12a6>] x86_64_start_reservations+0xb6/0xba [166843.625894] [<ffffffff81aa139c>] x86_64_start_kernel+0xf2/0xf9 [166843.625896] handlers: [166843.625898] [<ffffffff812dc8de>] twl_interrupt [166843.625900] Disabling IRQ #16 It's related to problem? EDIT #2: Based on feedback in comments, here is more informations. cat /proc/interrupts 16: 390813 0 0 0 IO-APIC-fasteoi 3w-sas Controller model: [ 1.095350] 3ware Storage Controller device driver for Linux v1.26.02.003. [ 1.095467] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014. [ 1.095641] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000. [ 1.095787] 3w-sas 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.095881] 3w-sas 0000:01:00.0: setting latency timer to 64 [ 1.910801] 3w-sas: scsi0: Found an LSI 3ware 9750-4i Controller at 0xfe560000, IRQ: 16. [ 2.216537] 3w-sas: scsi0: Firmware FH9X 5.08.00.008, BIOS BE9X 5.07.00.011, Phys: 8. [ 2.216836] scsi 0:0:0:0: Direct-Access LSI 9750-4i DISK 5.08 PQ: 0 ANSI: 5 And motherboard: description: Motherboard product: P8H67-M vendor: ASUSTeK Computer INC.

    Read the article

  • ovs-vsctl: "eth0" is not a valid UUID

    - by Przemek Lach
    I'm trying to setup an open v-switch inside my Ubuntu 12.04 Server VM. I have created three interfaces for this VM and I want to create a port mirror inside of the VM using these there interfaces and open v-switch. There are three Host-Only Adapters: eth0, eth1, eth2. The idea is that three other VM's will be connected to these adapters. One of these VM's will stream UDP video to eth0 and I want the vswitch'd VM to mirror those packets from eth0 onto eth1 and eth2. Each of the VM's connected to eth1 and eth2 will get the same video stream. I performed the following steps to install open v-switch: $ apt-get install python-simplejson python-qt4 python-twisted-conch automake autoconf gcc uml-utilities libtool build-essential $ apt-get install build-essential autoconf automake pkg-config $ wget http://openvswitch.org/releases/openvswitch-1.7.1.tar.gz $ tar xf http://openvswitch.org/releases/openvswitch-1.7.1.tar.gz $ cd http://openvswitch.org/releases/openvswitch-1.7.1.tar.gz $ apt-get install libssl-dev iproute tcpdump linux-headers-`uname -r` $ ./boot.sh $ ./configure - -with-linux=/lib/modules/`uname -r`/build $ make $ sudo make install After installation I configured as follows: $ insmod datapath/linux/openvswitch.ko $ sudo touch /usr/local/etc/ovs-vswitchd.conf $ mkdir -p /usr/local/etc/openvswitch $ ovsdb-tool create /usr/local/etc/openvswitch/conf.db Then I started the server: $ ovsdb-server /usr/local/etc/openvswitch/conf.db \ --remote=punix:/usr/local/var/run/openvswitch/db.sock \ --remote=db:Open_vSwitch,manager_options \ --private-key=db:SSL,private_key \ --certificate=db:SSL,certificate \ --bootstrap-ca-cert=db:SSL,ca_cert --pidfile --detach --log-file $ ovs-vsctl –no-wait init (run only once) $ ovs-vswitchd --pidfile --detach The above steps I got from this tutorial and it all worked fine. I then proceeded to add a port mirror based on the open v-switch documentation under Port Mirroring. I successfully completed the following commands: $ ovs-vsctl add-br br0 $ ovs-vsctl add-port br0 eth0 $ ovs-vsctl add-port br0 eth1 $ ovs-vsctl add-port br0 eth2 $ ifconfig eth0 promisc up $ ifconfig eth1 promisc up $ ifconfig eth2 promisc up At this point when I run ovs-vsctl show I get the following: 75bda8c2-b870-438b-9115-e36288ea1cd8 Bridge "br0" Port "br0" Interface "br0" type: internal Port "eth0" Interface "eth0" Port "eth2" Interface "eth2" Port "eth1" Interface "eth1" And when I run ifconfig I get the following: eth0 Link encap:Ethernet HWaddr 08:00:27:9f:51:ca inet6 addr: fe80::a00:27ff:fe9f:51ca/64 Scope:Link UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:17 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1494 (1.4 KB) TX bytes:468 (468.0 B) eth1 Link encap:Ethernet HWaddr 08:00:27:53:02:d4 inet6 addr: fe80::a00:27ff:fe53:2d4/64 Scope:Link UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:17 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1494 (1.4 KB) TX bytes:468 (468.0 B) eth2 Link encap:Ethernet HWaddr 08:00:27:cb:a5:93 inet6 addr: fe80::a00:27ff:fecb:a593/64 Scope:Link UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:17 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1494 (1.4 KB) TX bytes:468 (468.0 B) eth3 Link encap:Ethernet HWaddr 08:00:27:df:bb:d8 inet addr:192.168.1.139 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::a00:27ff:fedf:bbd8/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2211 errors:0 dropped:0 overruns:0 frame:0 TX packets:1196 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:182987 (182.9 KB) TX bytes:125441 (125.4 KB) NOTE: I use eth3 as a bridge adapter for SSH'ing into the VM. So now, I think I've done everything correctly but when I try to create the bridge using the following command: $ ovs-vsctl -- set Bridge br0 mirrors=@m -- --id=@eth0 get Port eth0 -- --id=@eth1 get Port eth1 -- --id=@m create Mirror name=app1Mirror select-dst-port=eth0 select-src-port=@eth0 output-port=@eth1,eth2 I get the following error: ovs-vsctl: "eth0" is not a valid UUID I don't understand why it's not able to find the interfaces?

    Read the article

  • CodePlex Daily Summary for Saturday, March 03, 2012

    CodePlex Daily Summary for Saturday, March 03, 2012Popular ReleasesAcDown????? - Anime&Comic Downloader: AcDown????? v3.9.1: ?? ●AcDown??????????、??、??????,????1M,????,????,?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。??????AcPlay?????,??????、????????????????。 ● AcDown???????????????????????????,???,???????????????????。 ● AcDown???????C#??,????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7/8 ????????????? ??:????????Windows XP???,?????????.NET Framework 2.0???(x86),?????"?????????"??? ??????????????,??????????: ??"AcDo...Windows Phone Commands for VS2010: Version 1.0: Initial Release Version 1.0 Connect from device or emulator (Monitors the connection) Show Device information (Plataform, build , version, avaliable memory, total memory, architeture Manager installed applications (Launch, uninstall and explorer isolate storage files) Manager core applications (Launch blocked applications from emulator (Office, Calculator, alarm, calendar , etc) Manager blocked settings from emulator (Airplane Mode, Celullar Network, Wifi, etc) Deploy and update ap...DNN Metro7 style Skin package: Metro7 style Skin for DotNetNuke 06.01.00: Changes on Version 06.01.00 Fixed issue on GraySmallTitle container, that breaks the layout Fixed issue on Blue Metro7 Skin where the Search, Login, Register, Date is missing Fixed issue with the Version numbers on the target file Fixed issue where the jQuery and jQuery-UI files not deleted on upgrade from Version 01.00.00 Added a internal page where the Image Slider would be replaces with a BannerPaneMedia Companion: MC 3.433b Release: General More GUI tweaks (mostly imperceptible!) Updates for mc_com.exe TV The 'Watched' button has been re-instigated Added TV Menu sub-option to search ALL for new Episodes (includes locked shows) Movies Added 'Source' field (eg DVD, Bluray, HDTV), customisable in Advanced Preferences (try it out, let us know how it works!) Added HTML <<format>> tag with optional parameters for video container, source, and resolution (updated HTML tags to be added to Documentation shortly) Known Issu...Picturethrill: Version 2.3.2.0: Release includes Self-Update feature for Picturethrill. What that means for users is that they are always guaranteed to have a fresh copy of Picturethrill on their computers with all latest fixes. When Picturethrill adds a new website to get pictures from, you will get it too!THE NVL Maker: The NVL Maker Ver 3.11: SIM??????,TRA??????, ????????????????,??????~(??????????????????) ??: 115?? ???? http://115.com/file/bewo7t11#THENVLMakerver3.11sim.zip MediaFire ???? http://www.mediafire.com/?wj9dmk3eb70mdzt 3.11 ??? ???: ·????????????UNICODE????????????????????(??Data.xp3) ·?????.?(https://sites.google.com/site/hiyuadv/) ?????????krkrcht.exe ·?????????Editor.exe,????????krkrcht.exe?? ??: ·Wizard.exe??,BUG??,?????????????? ·????(Code)???,???????????????, ·??3.10?,???????????????,?????????????? ...Simple MVVM Toolkit for Silverlight, WPF and Windows Phone: Simple MVVM Toolkit v3.0.0.0: Added support for Silverlight 5.0 and Windows Phone 7.1. Upgraded project templates and samples. Upgraded installer. There are some new prerequisites required for this version, namely Silverlight 5 Tools, Expression Blend Preview for Silverlight 5 (until the SDK is released), Windows Phone 7.1 SDK. Because it is in the experimental band, I have also removed the dependency on the Silverlight Testing Framework. You can use it if you wish, but the Ria Services project template no longer uses ...CODE Framework: 4.0.20301: The latest version adds a number of new features to the WPF system (such as stylable and testable messagebox support) as well as various new features throughout the system (especially in the Utilities namespace).WPF Sound Visualization Library: WPF SVL 0.3 (Source, Binaries, Examples, Help): Version 0.3 of WPFSVL. This includes three new controls: an equalizer, a digital clock, and a time editor.Cocktail: Cocktail v0.4: PrerequisitesVisual Studio 2010 with SP1 (any edition but Express) SQL Server Express (included automatically with most Visual Studio installs) Optional: Silverlight 4 or 5 Note: Install Silverlight 4 Tools and then the Silverlight 4 Toolkit. Likewise for Silverlight 5 Tools and the Silverlight 5 Toolkit DevForce Universal Express 6.1.6 or greater Included in the Cocktail download, DevForce Universal Express requires registration) Important: Install DevForce after all other compo...Orchard Project: Orchard 1.4: Please read our release notes for Orchard 1.4: http://docs.orchardproject.net/Documentation/Orchard-1-4-Release-NotesFluentData -Micro ORM with a fluent API that makes it simple to query a database: FluentData version 1.2: New features: - QueryValues method - Added support for automapping to enumerations (both int and string are supported). Fixed 2 reported issues.NetSqlAzMan - .NET SQL Authorization Manager: 3.6.0.15: 3.6.0.15 28-Feb-2012 • Fix: The communication object, System.ServiceModel.Channels.ServiceChannel, cannot be used for communication because it is in the Faulted state. Work Item 10435: http://netsqlazman.codeplex.com/workitem/10435 • Fix: Made StorageCache thread safe. Thanks to tangrl. • Fix: Members property of SqlAzManApplicationGroup is not functioning. Thanks to tangrl. Work Item 10267: http://netsqlazman.codeplex.com/workitem/10267 • Fix: Indexer are making database calls. Thanks to t...SCCM Client Actions Tool: Client Actions Tool v1.1: SCCM Client Actions Tool v1.1 is the latest version. It comes with following changes since last version: Added stop button to stop the ongoing process. Added action "Query update status". Added option "saveOnlineComputers" in config.ini to enable saving list of online computers from last session. Default value for "LatestClientVersion" set to SP2 R3 (4.00.6487.2157). Wuauserv service manual startup mode is considered healthy on Windows 7. Errors are now suppressed in checkReleases...Document.Editor: 2012.1: Whats new for Document.Editor 2012.1: Improved Recent Documents list Improved Insert Shape Improved Dialogs Minor Bug Fix's, improvements and speed upsASP.NET REST Services Framework: Release 1.1 - Standard version: Beginning from v1.1 the REST-services Framework is compatible with ASP.NET Routing model as well with CRUD (Create, Read, Update, and Delete) principle. These two are often important when building REST API functionality within your application. It also includes ability to apply Filters to a class to target all WebRest methods, as well as some performance enhancements. New version includes Metadata Explorer providing ability exploring the existing services that becomes essential as the number ...SQL Live Monitor: SQL Live Monitor 1.31: A quick fix to make it this version work with SQL 2012. Version 2 already has 2012 working, but am still developing the UI in version 2, so this is just an interim fix to allow user to monitor SQL 2012.DotNet.Highcharts: DotNet.Highcharts 1.1 with Examples: Fixed small bug in JsonSerializer about the numbers represented as string. Fixed Issue 310: decimal values don't work Fixed Issue 345: Disable Animation Refactored Highcharts class. Implemented Issue 341: More charts on one page. Added new class Container which can combine and display multiple charts. Usage: new Container(new[] { chart1, chart2, chart3, chart4 }) Implemented Feature 302: Inside an UpdatePanel - Added method (InFunction) which create the Highchart inside JavaScript f...Content Slider Module for DotNetNuke: 01.02.00: This release has the following updates and new features: Feature: One-Click Enabling of Pager Setting Feature: Cache Sliders for Performance Feature: Configurable Cache Setting Enhancement: Transitions can be Selected Bug: Secure Folder Images not Viewable Bug: Sliders Disappear on Postback Bug: Remote Images Cause Error Bug: Deleted Images Cause Error System Requirements DotNetNuke v06.00.00 or newer .Net Framework v3.5 SP1 or newer SQL Server 2005 or newerImage Resizer for Windows: Image Resizer 3 Preview 3: Here is yet another iteration toward what will eventually become Image Resizer 3. This release is stable. However, I'm calling it a preview since there are still many features I'd still like to add before calling it complete. Updated on February 28 to fix an issue with installing on multi-user machines. As usual, here is my progress report. Done Preview 3 Fix: 3206 3076 3077 5688 Fix: 7420 Fix: 7527 Fix: 7576 7612 Preview 2 6308 6309 Fix: 7339 Fix: 7357 Preview 1 UI...New Projectsbinbin pager: pager extensionCC&PPTK-VSN: CC&PPTK-VSN Thi?t l?p SVN di nhóm D16TPMCCG (Crud Class Generator): CCGDatamodel Manager: Datamodel Manager is tool for managing database part of application.Daun Management Studio: Daun Management Studio is a management tool that is used for configuring, managing, and administering all components within MongoDB. The tool includes both script editors and graphical tools which work with features of MongoDB.DotNetNuke Role-Based Control Panels: This provider extends the DotNetNuke control panel by allowing a host to specify the particular control panel that is to be loaded by role (and site). For non-administrators any user interface may be utilized, allowing for flexible custom functionality not otherwise possible.HTML Creator: HTML Creator allows a web designer/developer to concentrate on the design and development of their web project; not the mundane tasks of project development. HTML Creator will combine the development, testing, debugging, and publishing stages into a complete workflow. This project uses .NET 4 Framework, Visual Basic 2010, and WPF as the primary programming languages.Ibiiztera: 3D shapes and figures renderingiNavigate: Same jQuery autocomplete, but with more optionsMapUpdater: MapUpdater is a simple application that connects to one or more ftp servers, downloads your minecraft world data, generates images and uploads them to another ftp server. c10t is the only renderer currently supported.Minecraft Web Launcher: Minecraft Web Launcher detects attempts to use an incomplete Minecraft.net API and overrides it, allowing you to launch Minecraft from a web browser and go directly to a certain server.MS CRM 2011 - Orbis- Client Caching Tool: The purpose of this tool is to cache all or the top most aspx pages. Caching means that this tool tests the Microsoft Dynamics CRM Client offline setting. If the client is offline OrbCrmCC ensures in a defined interval that the MSCRM Client host is up and that the aspx files are Mushroom: A very nice tool for web developers for both client-side or server-side development. What I will do here is to turn my own development environment into a very easy-to-use gui application which will run on Windows, Linux, and MacOS. It will support different languages, frameworks, and databases. Mushroom will make individuals and teams work much more efficiently by doing all the drudgery automatically. By providing some standard ways of doing things, --of course without enforcing them, i...My NerdDinner for WP7: A sample OData app for Windows Phone 7.1 based on NerdDinner.com servicesNClassify: nclassifyRealAge: EN: Real Age a gadget / web page showing Your current age inclusive the leap days. Funny for birthday parties ! ES: Edad verdadero un gadget / página web calculando Tu edad verdadero actual incluido las días intercalares. Divertido para fiestas de cumpleaños! DE: Wahres Alter ein Gadget / eine Webseite das Dein wahres aktuelles Alter berechnet inklusive Schalttage. Lustig für Geburtstagsparties ! HTML, javascript, XMLSharpInteract: A library that aims at providing a more easy interface to a set of interaction tools.SL5 Basic Calculator (No Frill) ver 1.0: the project is a basic calculator control developed in Silverlight 5, feel free to include in your projects. However CODE is AS/IS without any guarantee and warantee . use at your own risk(Source code included.SlyLamb: We develop applications for Windows Phone 7. Here we place our open application examples.SQLinq - use LINQ to generate Ad-Hoc Sql Queries: Easily generate ad-hoc SQL code using LINQ in a strongly typed manner that allows for compile time validation of you sql scripts.SSamTV: LVTN2012WildSoft Own Project: Personal WildSoftware Own ProjectWP7 Weather: WP7 Weather shows weather from site weather.uaym2u: this is my portal for demo

    Read the article

  • Win7 Bluescreen: IRQ_NOT_LESS_OR_EQUAL | athrxusb.sys

    - by wretrOvian
    Hi I'd left my system on last night, and found the bluescreen in the morning. This has been happening occasionally, over the past few days. Details: ================================================== Dump File : 022710-18236-01.dmp Crash Time : 2/27/2010 8:46:44 AM Bug Check String : DRIVER_IRQL_NOT_LESS_OR_EQUAL Bug Check Code : 0x000000d1 Parameter 1 : 00000000`00001001 Parameter 2 : 00000000`00000002 Parameter 3 : 00000000`00000000 Parameter 4 : fffff880`06b5c0e1 Caused By Driver : athrxusb.sys Caused By Address : athrxusb.sys+760e1 File Description : Product Name : Company : File Version : Processor : x64 Computer Name : Full Path : C:\Windows\minidump\022710-18236-01.dmp Processors Count : 2 Major Version : 15 Minor Version : 7600 ================================================== HiJackThis ("[...]" indicates removed text; full log posted to pastebin): Logfile of Trend Micro HijackThis v2.0.2 Scan saved at 8:49:15 AM, on 2/27/2010 Platform: Unknown Windows (WinNT 6.01.3504) MSIE: Internet Explorer v8.00 (8.00.7600.16385) Boot mode: Normal Running processes: C:\Windows\DAODx.exe C:\Program Files (x86)\ASUS\EPU\EPU.exe C:\Program Files\ASUS\TurboV\TurboV.exe C:\Program Files (x86)\PowerISO\PWRISOVM.EXE C:\Program Files (x86)\OpenOffice.org 3\program\soffice.exe C:\Program Files (x86)\OpenOffice.org 3\program\soffice.bin D:\Downloads\HijackThis.exe C:\Program Files (x86)\uTorrent\uTorrent.exe R1 - HKCU\Software\Microsoft\Internet Explorer\[...] [...] O2 - BHO: Java(tm) Plug-In 2 SSV Helper - {DBC80044-A445-435b-BC74-9C25C1C588A9} - C:\Program Files (x86)\Java\jre6\bin\jp2ssv.dll O4 - HKLM\..\Run: [HDAudDeck] C:\Program Files (x86)\VIA\VIAudioi\VDeck\VDeck.exe -r O4 - HKLM\..\Run: [StartCCC] "C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static\CLIStart.exe" MSRun O4 - HKLM\..\Run: [TurboV] "C:\Program Files\ASUS\TurboV\TurboV.exe" O4 - HKLM\..\Run: [PWRISOVM.EXE] C:\Program Files (x86)\PowerISO\PWRISOVM.EXE O4 - HKLM\..\Run: [googletalk] C:\Program Files (x86)\Google\Google Talk\googletalk.exe /autostart O4 - HKLM\..\Run: [AdobeCS4ServiceManager] "C:\Program Files (x86)\Common Files\Adobe\CS4ServiceManager\CS4ServiceManager.exe" -launchedbylogin O4 - HKCU\..\Run: [uTorrent] "C:\Program Files (x86)\uTorrent\uTorrent.exe" O4 - HKUS\S-1-5-19\..\Run: [Sidebar] %ProgramFiles%\Windows Sidebar\Sidebar.exe /autoRun (User 'LOCAL SERVICE') O4 - HKUS\S-1-5-19\..\RunOnce: [mctadmin] C:\Windows\System32\mctadmin.exe (User 'LOCAL SERVICE') O4 - HKUS\S-1-5-20\..\Run: [Sidebar] %ProgramFiles%\Windows Sidebar\Sidebar.exe /autoRun (User 'NETWORK SERVICE') O4 - HKUS\S-1-5-20\..\RunOnce: [mctadmin] C:\Windows\System32\mctadmin.exe (User 'NETWORK SERVICE') O4 - Startup: OpenOffice.org 3.1.lnk = C:\Program Files (x86)\OpenOffice.org 3\program\quickstart.exe O13 - Gopher Prefix: O23 - Service: @%SystemRoot%\system32\Alg.exe,-112 (ALG) - Unknown owner - C:\Windows\System32\alg.exe (file missing) O23 - Service: AMD External Events Utility - Unknown owner - C:\Windows\system32\atiesrxx.exe (file missing) O23 - Service: ASUS System Control Service (AsSysCtrlService) - Unknown owner - C:\Program Files (x86)\ASUS\AsSysCtrlService\1.00.02\AsSysCtrlService.exe O23 - Service: DeviceVM Meta Data Export Service (DvmMDES) - DeviceVM - C:\ASUS.SYS\config\DVMExportService.exe O23 - Service: @%SystemRoot%\system32\efssvc.dll,-100 (EFS) - Unknown owner - C:\Windows\System32\lsass.exe (file missing) O23 - Service: ESET HTTP Server (EhttpSrv) - ESET - C:\Program Files\ESET\ESET NOD32 Antivirus\EHttpSrv.exe O23 - Service: ESET Service (ekrn) - ESET - C:\Program Files\ESET\ESET NOD32 Antivirus\x86\ekrn.exe O23 - Service: @%systemroot%\system32\fxsresm.dll,-118 (Fax) - Unknown owner - C:\Windows\system32\fxssvc.exe (file missing) O23 - Service: FLEXnet Licensing Service - Acresso Software Inc. - C:\Program Files (x86)\Common Files\Macrovision Shared\FLEXnet Publisher\FNPLicensingService.exe O23 - Service: FLEXnet Licensing Service 64 - Acresso Software Inc. - C:\Program Files\Common Files\Macrovision Shared\FLEXnet Publisher\FNPLicensingService64.exe O23 - Service: InstallDriver Table Manager (IDriverT) - Macrovision Corporation - C:\Program Files (x86)\Common Files\InstallShield\Driver\11\Intel 32\IDriverT.exe O23 - Service: @keyiso.dll,-100 (KeyIso) - Unknown owner - C:\Windows\system32\lsass.exe (file missing) O23 - Service: @comres.dll,-2797 (MSDTC) - Unknown owner - C:\Windows\System32\msdtc.exe (file missing) O23 - Service: @%SystemRoot%\System32\netlogon.dll,-102 (Netlogon) - Unknown owner - C:\Windows\system32\lsass.exe (file missing) O23 - Service: @%systemroot%\system32\psbase.dll,-300 (ProtectedStorage) - Unknown owner - C:\Windows\system32\lsass.exe (file missing) O23 - Service: Protexis Licensing V2 (PSI_SVC_2) - Protexis Inc. - c:\Program Files (x86)\Common Files\Protexis\License Service\PsiService_2.exe O23 - Service: @%systemroot%\system32\Locator.exe,-2 (RpcLocator) - Unknown owner - C:\Windows\system32\locator.exe (file missing) O23 - Service: @%SystemRoot%\system32\samsrv.dll,-1 (SamSs) - Unknown owner - C:\Windows\system32\lsass.exe (file missing) O23 - Service: @%SystemRoot%\system32\snmptrap.exe,-3 (SNMPTRAP) - Unknown owner - C:\Windows\System32\snmptrap.exe (file missing) O23 - Service: @%systemroot%\system32\spoolsv.exe,-1 (Spooler) - Unknown owner - C:\Windows\System32\spoolsv.exe (file missing) O23 - Service: @%SystemRoot%\system32\sppsvc.exe,-101 (sppsvc) - Unknown owner - C:\Windows\system32\sppsvc.exe (file missing) O23 - Service: Steam Client Service - Valve Corporation - C:\Program Files (x86)\Common Files\Steam\SteamService.exe O23 - Service: @%SystemRoot%\system32\ui0detect.exe,-101 (UI0Detect) - Unknown owner - C:\Windows\system32\UI0Detect.exe (file missing) O23 - Service: @%SystemRoot%\system32\vaultsvc.dll,-1003 (VaultSvc) - Unknown owner - C:\Windows\system32\lsass.exe (file missing) O23 - Service: @%SystemRoot%\system32\vds.exe,-100 (vds) - Unknown owner - C:\Windows\System32\vds.exe (file missing) O23 - Service: @%systemroot%\system32\vssvc.exe,-102 (VSS) - Unknown owner - C:\Windows\system32\vssvc.exe (file missing) O23 - Service: @%systemroot%\system32\wbengine.exe,-104 (wbengine) - Unknown owner - C:\Windows\system32\wbengine.exe (file missing) O23 - Service: @%Systemroot%\system32\wbem\wmiapsrv.exe,-110 (wmiApSrv) - Unknown owner - C:\Windows\system32\wbem\WmiApSrv.exe (file missing) O23 - Service: @%PROGRAMFILES%\Windows Media Player\wmpnetwk.exe,-101 (WMPNetworkSvc) - Unknown owner - C:\Program Files (x86)\Windows Media Player\wmpnetwk.exe (file missing) -- End of file - 6800 bytes CPU-Z ("[...]" indicates removed text; see full log posted to pastebin): CPU-Z TXT Report ------------------------------------------------------------------------- Binaries ------------------------------------------------------------------------- CPU-Z version 1.53.1 Processors ------------------------------------------------------------------------- Number of processors 1 Number of threads 2 APICs ------------------------------------------------------------------------- Processor 0 -- Core 0 -- Thread 0 0 -- Core 1 -- Thread 0 1 Processors Information ------------------------------------------------------------------------- Processor 1 ID = 0 Number of cores 2 (max 2) Number of threads 2 (max 2) Name AMD Phenom II X2 550 Codename Callisto Specification AMD Phenom(tm) II X2 550 Processor Package Socket AM3 (938) CPUID F.4.2 Extended CPUID 10.4 Brand ID 29 Core Stepping RB-C2 Technology 45 nm Core Speed 3110.7 MHz Multiplier x FSB 15.5 x 200.7 MHz HT Link speed 2006.9 MHz Instructions sets MMX (+), 3DNow! (+), SSE, SSE2, SSE3, SSE4A, x86-64, AMD-V L1 Data cache 2 x 64 KBytes, 2-way set associative, 64-byte line size L1 Instruction cache 2 x 64 KBytes, 2-way set associative, 64-byte line size L2 cache 2 x 512 KBytes, 16-way set associative, 64-byte line size L3 cache 6 MBytes, 48-way set associative, 64-byte line size FID/VID Control yes Min FID 4.0x P-State FID 0xF - VID 0x10 P-State FID 0x8 - VID 0x18 P-State FID 0x3 - VID 0x20 P-State FID 0x100 - VID 0x2C Package Type 0x1 Model 50 String 1 0x7 String 2 0x6 Page 0x0 TDP Limit 79 Watts TDC Limit 66 Amps Attached device PCI device at bus 0, device 24, function 0 Attached device PCI device at bus 0, device 24, function 1 Attached device PCI device at bus 0, device 24, function 2 Attached device PCI device at bus 0, device 24, function 3 Attached device PCI device at bus 0, device 24, function 4 Thread dumps ------------------------------------------------------------------------- CPU Thread 0 APIC ID 0 Topology Processor ID 0, Core ID 0, Thread ID 0 Type 0200400Ah Max CPUID level 00000005h Max CPUID ext. level 8000001Bh Cache descriptor Level 1, I, 64 KB, 1 thread(s) Cache descriptor Level 1, D, 64 KB, 1 thread(s) Cache descriptor Level 2, U, 512 KB, 1 thread(s) Cache descriptor Level 3, U, 6 MB, 2 thread(s) CPUID 0x00000000 0x00000005 0x68747541 0x444D4163 0x69746E65 0x00000001 0x00100F42 0x00020800 0x00802009 0x178BFBFF 0x00000002 0x00000000 0x00000000 0x00000000 0x00000000 0x00000003 0x00000000 0x00000000 0x00000000 0x00000000 0x00000004 0x00000000 0x00000000 0x00000000 0x00000000 0x00000005 0x00000040 0x00000040 0x00000003 0x00000000 [...] CPU Thread 1 APIC ID 1 Topology Processor ID 0, Core ID 1, Thread ID 0 Type 0200400Ah Max CPUID level 00000005h Max CPUID ext. level 8000001Bh Cache descriptor Level 1, I, 64 KB, 1 thread(s) Cache descriptor Level 1, D, 64 KB, 1 thread(s) Cache descriptor Level 2, U, 512 KB, 1 thread(s) Cache descriptor Level 3, U, 6 MB, 2 thread(s) CPUID 0x00000000 0x00000005 0x68747541 0x444D4163 0x69746E65 0x00000001 0x00100F42 0x01020800 0x00802009 0x178BFBFF 0x00000002 0x00000000 0x00000000 0x00000000 0x00000000 0x00000003 0x00000000 0x00000000 0x00000000 0x00000000 0x00000004 0x00000000 0x00000000 0x00000000 0x00000000 0x00000005 0x00000040 0x00000040 0x00000003 0x00000000 [...] Chipset ------------------------------------------------------------------------- Northbridge AMD 790GX rev. 00 Southbridge ATI SB750 rev. 00 Memory Type DDR3 Memory Size 4096 MBytes Channels Dual, (Unganged) Memory Frequency 669.0 MHz (3:10) CAS# latency (CL) 9.0 RAS# to CAS# delay (tRCD) 9 RAS# Precharge (tRP) 9 Cycle Time (tRAS) 24 Bank Cycle Time (tRC) 33 Command Rate (CR) 1T Uncore Frequency 2006.9 MHz Memory SPD ------------------------------------------------------------------------- DIMM # 1 SMBus address 0x50 Memory type DDR3 Module format UDIMM Manufacturer (ID) G.Skill (7F7F7F7FCD000000) Size 2048 MBytes Max bandwidth PC3-10700 (667 MHz) Part number F3-10600CL9-2GBNT Number of banks 8 Nominal Voltage 1.50 Volts EPP no XMP no JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency JEDEC #1 6.0-6-6-17-23 @ 457 MHz JEDEC #2 7.0-7-7-20-27 @ 533 MHz JEDEC #3 8.0-8-8-22-31 @ 609 MHz JEDEC #4 9.0-9-9-25-34 @ 685 MHz DIMM # 2 SMBus address 0x51 Memory type DDR3 Module format UDIMM Manufacturer (ID) G.Skill (7F7F7F7FCD000000) Size 2048 MBytes Max bandwidth PC3-10700 (667 MHz) Part number F3-10600CL9-2GBNT Number of banks 8 Nominal Voltage 1.50 Volts EPP no XMP no JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency JEDEC #1 6.0-6-6-17-23 @ 457 MHz JEDEC #2 7.0-7-7-20-27 @ 533 MHz JEDEC #3 8.0-8-8-22-31 @ 609 MHz JEDEC #4 9.0-9-9-25-34 @ 685 MHz DIMM # 1 SPD registers [...] DIMM # 2 SPD registers [...] Monitoring ------------------------------------------------------------------------- Mainboard Model M4A78T-E (0x000001F7 - 0x00A955E4) LPCIO ------------------------------------------------------------------------- LPCIO Vendor ITE LPCIO Model IT8720 LPCIO Vendor ID 0x90 LPCIO Chip ID 0x8720 LPCIO Revision ID 0x2 Config Mode I/O address 0x2E Config Mode LDN 0x4 Config Mode registers [...] Register space LPC, base address = 0x0290 Hardware Monitors ------------------------------------------------------------------------- Hardware monitor ITE IT87 Voltage 1 1.62 Volts [0x65] (VIN1) Voltage 2 1.15 Volts [0x48] (CPU VCORE) Voltage 3 5.03 Volts [0xBB] (+5V) Voltage 8 3.34 Volts [0xD1] (VBAT) Temperature 0 39°C (102°F) [0x27] (TMPIN0) Temperature 1 43°C (109°F) [0x2B] (TMPIN1) Fan 0 3096 RPM [0xDA] (FANIN0) Register space LPC, base address = 0x0290 [...] Hardware monitor AMD SB6xx/7xx Voltage 0 1.37 Volts [0x1D2] (CPU VCore) Voltage 1 3.50 Volts [0x27B] (CPU IO) Voltage 2 12.68 Volts [0x282] (+12V) Hardware monitor AMD Phenom II X2 550 Power 0 89.10 W (Processor) Temperature 0 35°C (94°F) [0x115] (Core #0) Temperature 1 35°C (94°F) [0x115] (Core #1)

    Read the article

  • Puppet's automatically generated certificates failing

    - by gparent
    I am running a default configuration of Puppet on Debian Squeeze 6.0.4. The server's FQDN is master.example.com. The client's FQDN is client.example.com. I am able to contact the puppet master and send a CSR. I sign it using puppetca -sa but the client will still not connect. Date of both machines is within 2 seconds of Tue Apr 3 20:59:00 UTC 2012 as I wrote this sentence. This is what appears in /var/log/syslog: Apr 3 17:03:52 localhost puppet-agent[18653]: Reopening log files Apr 3 17:03:52 localhost puppet-agent[18653]: Starting Puppet client version 2.6.2 Apr 3 17:03:53 localhost puppet-agent[18653]: Could not retrieve catalog from remote server: SSL_connect returned=1 errno=0 state=SSLv3 read server certificate B: certificate verify failed Apr 3 17:03:53 localhost puppet-agent[18653]: Using cached catalog Apr 3 17:03:53 localhost puppet-agent[18653]: Could not retrieve catalog; skipping run Here is some interesting output: OpenSSL client test: client:~# openssl s_client -host master.example.com -port 8140 -cert /var/lib/puppet/ssl/certs/client.example.com.pem -key /var/lib/puppet/ssl/private_keys/client.example.com.pem -CAfile /var/lib/puppet/ssl/certs/ca.pem CONNECTED(00000003) depth=1 /CN=Puppet CA: master.example.com verify return:1 depth=0 /CN=master.example.com verify error:num=7:certificate signature failure verify return:1 depth=0 /CN=master.example.com verify return:1 18509:error:1409441B:SSL routines:SSL3_READ_BYTES:tlsv1 alert decrypt error:s3_pkt.c:1102:SSL alert number 51 18509:error:140790E5:SSL routines:SSL23_WRITE:ssl handshake failure:s23_lib.c:188: client:~# master's certificate: root@master:/etc/puppet# openssl x509 -text -noout -in /etc/puppet/ssl/certs/master.example.com.pem Certificate: Data: Version: 3 (0x2) Serial Number: 2 (0x2) Signature Algorithm: sha1WithRSAEncryption Issuer: CN=Puppet CA: master.example.com Validity Not Before: Apr 2 20:01:28 2012 GMT Not After : Apr 2 20:01:28 2017 GMT Subject: CN=master.example.com Subject Public Key Info: Public Key Algorithm: rsaEncryption RSA Public Key: (1024 bit) Modulus (1024 bit): 00:a9:c1:f9:4c:cd:0f:68:84:7b:f4:93:16:20:44: 7a:2b:05:8e:57:31:05:8e:9c:c8:08:68:73:71:39: c1:86:6a:59:93:6e:53:aa:43:11:83:5b:2d:8c:7d: 54:05:65:c1:e1:0e:94:4a:f0:86:58:c3:3d:4f:f3: 7d:bd:8e:29:58:a6:36:f4:3e:b2:61:ec:53:b5:38: 8e:84:ac:5f:a3:e3:8c:39:bd:cf:4f:3c:ff:a9:65: 09:66:3c:ba:10:14:69:d5:07:57:06:28:02:37:be: 03:82:fb:90:8b:7d:b3:a5:33:7b:9b:3a:42:51:12: b3:ac:dd:d5:58:69:a9:8a:ed Exponent: 65537 (0x10001) X509v3 extensions: X509v3 Basic Constraints: critical CA:FALSE Netscape Comment: Puppet Ruby/OpenSSL Internal Certificate X509v3 Key Usage: critical Digital Signature, Key Encipherment X509v3 Subject Key Identifier: 8C:2F:14:84:B6:A1:B5:0C:11:52:36:AB:E5:3F:F2:B9:B3:25:F3:1C X509v3 Extended Key Usage: critical TLS Web Server Authentication, TLS Web Client Authentication Signature Algorithm: sha1WithRSAEncryption 7b:2c:4f:c2:76:38:ab:03:7f:c6:54:d9:78:1d:ab:6c:45:ab: 47:02:c7:fd:45:4e:ab:b5:b6:d9:a7:df:44:72:55:0c:a5:d0: 86:58:14:ae:5f:6f:ea:87:4d:78:e4:39:4d:20:7e:3d:6d:e9: e2:5e:d7:c9:3c:27:43:a4:29:44:85:a1:63:df:2f:55:a9:6a: 72:46:d8:fb:c7:cc:ca:43:e7:e1:2c:fe:55:2a:0d:17:76:d4: e5:49:8b:85:9f:fa:0e:f6:cc:e8:28:3e:8b:47:b0:e1:02:f0: 3d:73:3e:99:65:3b:91:32:c5:ce:e4:86:21:b2:e0:b4:15:b5: 22:63 root@master:/etc/puppet# CA's certificate: root@master:/etc/puppet# openssl x509 -text -noout -in /etc/puppet/ssl/certs/ca.pem Certificate: Data: Version: 3 (0x2) Serial Number: 1 (0x1) Signature Algorithm: sha1WithRSAEncryption Issuer: CN=Puppet CA: master.example.com Validity Not Before: Apr 2 20:01:05 2012 GMT Not After : Apr 2 20:01:05 2017 GMT Subject: CN=Puppet CA: master.example.com Subject Public Key Info: Public Key Algorithm: rsaEncryption RSA Public Key: (1024 bit) Modulus (1024 bit): 00:b5:2c:3e:26:a3:ae:43:b8:ed:1e:ef:4d:a1:1e: 82:77:78:c2:98:3f:e2:e0:05:57:f0:8d:80:09:36: 62:be:6c:1a:21:43:59:1d:e9:b9:4d:e0:9c:fa:09: aa:12:a1:82:58:fc:47:31:ed:ad:ad:73:01:26:97: ef:d2:d6:41:6b:85:3b:af:70:00:b9:63:e9:1b:c3: ce:57:6d:95:0e:a6:d2:64:bd:1f:2c:1f:5c:26:8e: 02:fd:d3:28:9e:e9:8f:bc:46:bb:dd:25:db:39:57: 81:ed:e5:c8:1f:3d:ca:39:cf:e7:f3:63:75:f6:15: 1f:d4:71:56:ed:84:50:fb:5d Exponent: 65537 (0x10001) X509v3 extensions: X509v3 Basic Constraints: critical CA:TRUE Netscape Comment: Puppet Ruby/OpenSSL Internal Certificate X509v3 Key Usage: critical Certificate Sign, CRL Sign X509v3 Subject Key Identifier: 8C:2F:14:84:B6:A1:B5:0C:11:52:36:AB:E5:3F:F2:B9:B3:25:F3:1C Signature Algorithm: sha1WithRSAEncryption 1d:cd:c6:65:32:42:a5:01:62:46:87:10:da:74:7e:8b:c8:c9: 86:32:9e:c2:2e:c1:fd:00:79:f0:ef:d8:73:dd:7e:1b:1a:3f: cc:64:da:a3:38:ad:49:4e:c8:4d:e3:09:ba:bc:66:f2:6f:63: 9a:48:19:2d:27:5b:1d:2a:69:bf:4f:f4:e0:67:5e:66:84:30: e5:85:f4:49:6e:d0:92:ae:66:77:50:cf:45:c0:29:b2:64:87: 12:09:d3:10:4d:91:b6:f3:63:c4:26:b3:fa:94:2b:96:18:1f: 9b:a9:53:74:de:9c:73:a4:3a:8d:bf:fa:9c:c0:42:9d:78:49: 4d:70 root@master:/etc/puppet# Client's certificate: client:~# openssl x509 -text -noout -in /var/lib/puppet/ssl/certs/client.example.com.pem Certificate: Data: Version: 3 (0x2) Serial Number: 3 (0x3) Signature Algorithm: sha1WithRSAEncryption Issuer: CN=Puppet CA: master.example.com Validity Not Before: Apr 2 20:01:36 2012 GMT Not After : Apr 2 20:01:36 2017 GMT Subject: CN=client.example.com Subject Public Key Info: Public Key Algorithm: rsaEncryption RSA Public Key: (1024 bit) Modulus (1024 bit): 00:ae:88:6d:9b:e3:b1:fc:47:07:d6:bf:ea:53:d1: 14:14:9b:35:e6:70:43:e0:58:35:76:ac:c5:9d:86: 02:fd:77:28:fc:93:34:65:9d:dd:0b:ea:21:14:4d: 8a:95:2e:28:c9:a5:8d:a2:2c:0e:1c:a0:4c:fa:03: e5:aa:d3:97:98:05:59:3c:82:a9:7c:0e:e9:df:fd: 48:81:dc:33:dc:88:e9:09:e4:19:d6:e4:7b:92:33: 31:73:e4:f2:9c:42:75:b2:e1:9f:d9:49:8c:a7:eb: fa:7d:cb:62:22:90:1c:37:3a:40:95:a7:a0:3b:ad: 8e:12:7c:6e:ad:04:94:ed:47 Exponent: 65537 (0x10001) X509v3 extensions: X509v3 Basic Constraints: critical CA:FALSE Netscape Comment: Puppet Ruby/OpenSSL Internal Certificate X509v3 Key Usage: critical Digital Signature, Key Encipherment X509v3 Subject Key Identifier: 8C:2F:14:84:B6:A1:B5:0C:11:52:36:AB:E5:3F:F2:B9:B3:25:F3:1C X509v3 Extended Key Usage: critical TLS Web Server Authentication, TLS Web Client Authentication Signature Algorithm: sha1WithRSAEncryption 33:1f:ec:3c:91:5a:eb:c6:03:5f:a1:58:60:c3:41:ed:1f:fe: cb:b2:40:11:63:4d:ba:18:8a:8b:62:ba:ab:61:f5:a0:6c:0e: 8a:20:56:7b:10:a1:f9:1d:51:49:af:70:3a:05:f9:27:4a:25: d4:e6:88:26:f7:26:e0:20:30:2a:20:1d:c4:d3:26:f1:99:cf: 47:2e:73:90:bd:9c:88:bf:67:9e:dd:7c:0e:3a:86:6b:0b:8d: 39:0f:db:66:c0:b6:20:c3:34:84:0e:d8:3b:fc:1c:a8:6c:6c: b1:19:76:65:e6:22:3c:bf:ff:1c:74:bb:62:a0:46:02:95:fa: 83:41 client:~#

    Read the article

  • FreeBSD 8.0 - Macbook: Trying to Connect to Wireless

    - by Koroviev
    What Happened A few days ago I installed FreeBSD 8from USB to my Macbook (Core Duo, 13"). The first thing I wanted to do was get my GUI back. I'm new to FreeBSD and it's my first time off of mac or windows, so I had some learning to do. I tried to a make clean install of xorg with ports but it returned many "No address record" errors. I realised I hadn't configured network settings and then the fun started. I ran ifconfig and it found 5 devices: msk0, ath0, fwe0, fwip0, lo0. * ath0 was identified as media: IEEE 802.11 Wireless Ethernet autoselect so it was clear which one I needed. From what I gathered, there are 3 files and two processes involved here: /boot/loader.conf /etc/wpa_supplicant.conf /etc/rc.conf /etc/rc.d/netif wpa_supplicant (which is a part of the former too) I'm certain it's a big simplification, so correct me if I'm wrong here. What I Tried I configured /boot/loader.conf with the few basic settings, and I'm most sure that this file is okay. The other 2 were more puzzling. I tried to make a network package in wpa_supplicant.conf. I found the ssid of the router, but the security wasn't so easy. The routers configuration on security is set to "Auto", with no explanation given. Other options are there, but Auto is selected. Another laptop uses WEP to connect (it's Vista, so I don't know how to get any more info than that), but I never configured it to do it. There's a string labled "wireless key" on the bottom of the router which I entered to set it up a new machine on the network (Windows and Macs, so it was simplified). I never had to choose a security type and only learned about them by installing FreeBSD. So perhaps WEP is what "Auto" means, but I can't find any other evidence. wpa_supplicant.conf seemed to never be correctly configured. I always got errors related to it and WPA_supplicant doesn't work. It gave me "Can't disable/enable WPA in the driver" errors and more once when I enabled -d -d. This was when I was trying some suspect configurations in rc.conf though. Usually it does nothing except hijack the shell and print "CTRL-SCAN-EVENT-RESULT" every 10 seconds. I learned how to clone the ath0 device to a wlandev interface (wlan0). ath0 is associated to it and their connection seems to go smoothly. But the wlan0's connection to the network is the problem. I couldn't create this with rc.conf, I do something wrong and get ifconfig: create: bad value errors whenever it's parsed. I did it via the shell instead. What Now? I scanned with wlan0 today: ifconfig wlan0 list scan It shows my router, even my neighbour's router. It was a relief to finally get some feedback. So wlan0 is UP and detects the router, but it is always status: no carrier. It can't associate with it and I can't figure out why. Running /etc/rc.d/netif start returns almost the same result as ifconfig would. It shows lo0 and wlan0, and sometimes ath0. I still not sure what lo0 is doing. So; how do I associate with it? We can assume it's WEP security based on how the other laptop is setup. I'll give every relevant output here. After boot, with a blank rc.conf this is what ifconfig returns: msk0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=11a<TXCSUM,VLAN_MTU,VLAN_HWTAGGING,TSO4> ether 00:17:f2:29:89:3b media: Ethernet autoselect ath0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 2290 ether 00:16:cb:bb:fe:65 media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) status: no carrier fwe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=8<VLAN_MTU> ether 02:17:f2:60:ad:7e ch 1 dma -1 fwip0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 lladdr 0.17.f2.ff.fe.60.ad.7e.a.2.ff.fe.0.0.0.0 lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 options=3<RXCSUM,TXCSUM> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5 inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff000000 I run: ifconfig wlan0 create wlandev ath0 It returns: wlan0: bpf attached wlan0: bpf attached wlan0: Ethernet address: xx:xx:xx:xx:xx:xx Ifconfig now returns: msk0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=11a<TXCSUM,VLAN_MTU,VLAN_HWTAGGING,TSO4> ether 00:17:f2:29:89:3b media: Ethernet autoselect ath0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 2290 ether 00:16:cb:bb:fe:65 media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) status: no carrier fwe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=8<VLAN_MTU> ether 02:17:f2:60:ad:7e ch 1 dma -1 fwip0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 lladdr 0.17.f2.ff.fe.60.ad.7e.a.2.ff.fe.0.0.0.0 lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 options=3<RXCSUM,TXCSUM> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5 inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff000000 wlan0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 ether 00:16:cb:bb:fe:65 media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) status: no carrier ssid "" channel 1 (2412 Mhz 11b) regdomain 106 indoor ecm authmode OPEN privacy OFF txpower 20 bmiss 7 scanvalid 60 bgscan bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 1 wme burst bintval 0 I run: ifconfig wlan0 up ifconfig wlan0 scan It finds my router and displays its details. I can feed it my routers details now, using: ifconfig wlan0 key value key value ... They show up in wlan0 when I run ifconfig, but it still doesn't associate. What details should I feed it, what exactly is needed? What, if anything, should I have in /etc/wpa_supplicant.conf (and if that psk is needed, is it most likely the string I mentioned above)? If I define the ssid in wpa_supplicant.conf, should I still feed it to wlan0? What process should I then use to associate it? 5 .How should I add these things to rc.conf so it will automatically do this at boot? A huge thank you in advance for any help you can give, I've spent hours crawling about the shell and I've learned quite a bit from it (I finally got the hang of vi too, from all that editing). But the sooner this is fixed, the better. *P.S. I was, and still am, wondering where the extra three devices come from (the wireless and wired were all I expected to find). lo0 is up at each boot and /etc/rc.d/netif, I have no idea what it is and can't find it in dmesg. Resources: /etc/loader.conf: Code: if_ath_load="YES" wlan_wep_load="YES" wlan_ccmp_load="YES" wlan_tkip_load="YES" /etc/wpa_supplicant.conf (I emptied it of everything unnecessary, because I was just causing errors) network={ ssid="BTVOYAGER2110-1C" } /etc/rc.conf has no network settings, I commented them out because of errors. There was my attempt to clone ath0 and feed it info, but I did if via the shell instead. I've included the output of dmesg as an attachment, in case it's useful. I'd include the boot text (which appears before login) but I don't know how to catch it into a text file. If it's needed and somebody tells me how, I will (actually, even if it's not needed, how can I view it to read?).

    Read the article

  • vmware nat internet connection

    - by ziftech
    Host: Windows Server 2008 / VMWare Server 2 Has Internet connection ip: 172.17.62.1 (NAT adapter) no gateway, no dns Guest: Windows Server 2003 ip: 172.17.62.2 (NAT) gateway 172.17.62.5 (set in VMware network manager for NAT) Host and guest can see each other, but guest have no internet connection (only ping by ip) In what may be the problem? HOST Ethernet adapter VMware Network Adapter VMnet8: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet8 Physical Address. . . . . . . . . : 00-50-56-C0-00-08 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::f1c1:3518:abb4:c05%24(Preferred) IPv4 Address. . . . . . . . . . . : 172.17.67.1(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 486559830 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-13-CF-8C-9F-40-61-86-2B-8F-AD DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 NetBIOS over Tcpip. . . . . . . . : Enabled GUEST DNS-suffix . . : Description. . . . . . . . . . . . : VMware Accelerated AMD PCNet Adapter Physical. . . . . . . . . : 00-0C-29-71-A5-43 DHCP . . . . . . . . . . . : no ip . . . . . . . . . . . . : 172.17.67.2 subnet mask . . . . . . . . . . : 255.255.255.0 gateway . . . . . . . . . . : 172.17.67.5 DNS . . . . . . . . . . . . : 8.8.8.8 All firewalls are down, I can ping hosts, but no telnet connection - telnet google.com 80

    Read the article

  • Tricks and Optimizations for you Sitecore website

    - by amaniar
    When working with Sitecore there are some optimizations/configurations I usually repeat in order to make my app production ready. Following is a small list I have compiled from experience, Sitecore documentation, communicating with Sitecore Engineers etc. This is not supposed to be technically complete and might not be fit for all environments.   Simple configurations that can make a difference: 1) Configure Sitecore Caches. This is the most straight forward and sure way of increasing the performance of your website. Data and item cache sizes (/databases/database/ [id=web] ) should be configured as needed. You may start with a smaller number and tune them as needed. <cacheSizes hint="setting"> <data>300MB</data> <items>300MB</items> <paths>5MB</paths> <standardValues>5MB</standardValues> </cacheSizes> Tune the html, registry etc cache sizes for your website.   <cacheSizes> <sites> <website> <html>300MB</html> <registry>1MB</registry> <viewState>10MB</viewState> <xsl>5MB</xsl> </website> </sites> </cacheSizes> Tune the prefetch cache settings under the App_Config/Prefetch/ folder. Sample /App_Config/Prefetch/Web.Config: <configuration> <cacheSize>300MB</cacheSize> <!--preload items that use this template--> <template desc="mytemplate">{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}</template> <!--preload this item--> <item desc="myitem">{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX }</item> <!--preload children of this item--> <children desc="childitems">{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}</children> </configuration> Break your page into sublayouts so you may cache most of them. Read the caching configuration reference: http://sdn.sitecore.net/upload/sitecore6/sc62keywords/cache_configuration_reference_a4.pdf   2) Disable Analytics for the Shell Site <site name="shell" virtualFolder="/sitecore/shell" physicalFolder="/sitecore/shell" rootPath="/sitecore/content" startItem="/home" language="en" database="core" domain="sitecore" loginPage="/sitecore/login" content="master" contentStartItem="/Home" enableWorkflow="true" enableAnalytics="false" xmlControlPage="/sitecore/shell/default.aspx" browserTitle="Sitecore" htmlCacheSize="2MB" registryCacheSize="3MB" viewStateCacheSize="200KB" xslCacheSize="5MB" />   3) Increase the Check Interval for the MemoryMonitorHook so it doesn’t run every 5 seconds (default). <hook type="Sitecore.Diagnostics.MemoryMonitorHook, Sitecore.Kernel"> <param desc="Threshold">800MB</param> <param desc="Check interval">00:05:00</param> <param desc="Minimum time between log entries">00:01:00</param> <ClearCaches>false</ClearCaches> <GarbageCollect>false</GarbageCollect> <AdjustLoadFactor>false</AdjustLoadFactor> </hook>   4) Set Analytics.PeformLookup (Sitecore.Analytics.config) to false if your environment doesn’t have access to the internet or you don’t intend to use reverse DNS lookup. <setting name="Analytics.PerformLookup" value="false" />   5) Set the value of the “Media.MediaLinkPrefix” setting to “-/media”: <setting name="Media.MediaLinkPrefix" value="-/media" /> Add the following line to the customHandlers section: <customHandlers> <handler trigger="-/media/" handler="sitecore_media.ashx" /> <handler trigger="~/media/" handler="sitecore_media.ashx" /> <handler trigger="~/api/" handler="sitecore_api.ashx" /> <handler trigger="~/xaml/" handler="sitecore_xaml.ashx" /> <handler trigger="~/icon/" handler="sitecore_icon.ashx" /> <handler trigger="~/feed/" handler="sitecore_feed.ashx" /> </customHandlers> Link: http://squad.jpkeisala.com/2011/10/sitecore-media-library-performance-optimization-checklist/   6) Performance counters should be disabled in production if not being monitored <setting name="Counters.Enabled" value="false" />   7) Disable Item/Memory/Timing threshold warnings. Due to the nature of this component, it brings no value in production. <!--<processor type="Sitecore.Pipelines.HttpRequest.StartMeasurements, Sitecore.Kernel" />--> <!--<processor type="Sitecore.Pipelines.HttpRequest.StopMeasurements, Sitecore.Kernel"> <TimingThreshold desc="Milliseconds">1000</TimingThreshold> <ItemThreshold desc="Item count">1000</ItemThreshold> <MemoryThreshold desc="KB">10000</MemoryThreshold> </processor>—>   8) The ContentEditor.RenderCollapsedSections setting is a hidden setting in the web.config file, which by default is true. Setting it to false will improve client performance for authoring environments. <setting name="ContentEditor.RenderCollapsedSections" value="false" />   9) Add a machineKey section to your Web.Config file when using a web farm. Link: http://msdn.microsoft.com/en-us/library/ff649308.aspx   10) If you get errors in the log files similar to: WARN Could not create an instance of the counter 'XXX.XXX' (category: 'Sitecore.System') Exception: System.UnauthorizedAccessException Message: Access to the registry key 'Global' is denied. Make sure the ApplicationPool user is a member of the system “Performance Monitor Users” group on the server.   11) Disable WebDAV configurations on the CD Server if not being used. More: http://sitecoreblog.alexshyba.com/2011/04/disable-webdav-in-sitecore.html   12) Change Log4Net settings to only log Errors on content delivery environments to avoid unnecessary logging. <root> <priority value="ERROR" /> <appender-ref ref="LogFileAppender" /> </root>   13) Disable Analytics for any content item that doesn’t add value. For example a page that redirects to another page.   14) When using Web User Controls avoid registering them on the page the asp.net way: <%@ Register Src="~/layouts/UserControls/MyControl.ascx" TagName="MyControl" TagPrefix="uc2" %> Use Sublayout web control instead – This way Sitecore caching could be leveraged <sc:Sublayout ID="ID" Path="/layouts/UserControls/MyControl.ascx" Cacheable="true" runat="server" />   15) Avoid querying for all children recursively when all items are direct children. Sitecore.Context.Database.SelectItems("/sitecore/content/Home//*"); //Use: Sitecore.Context.Database.GetItem("/sitecore/content/Home");   16) On IIS — you enable static & dynamic content compression on CM and CD More: http://technet.microsoft.com/en-us/library/cc754668%28WS.10%29.aspx   17) Enable HTTP Keep-alive and content expiration in IIS.   18) Use GUID’s when accessing items and fields instead of names or paths. Its faster and wont break your code when things get moved or renamed. Context.Database.GetItem("{324DFD16-BD4F-4853-8FF1-D663F6422DFF}") Context.Item.Fields["{89D38A8F-394E-45B0-826B-1A826CF4046D}"]; //is better than Context.Database.GetItem("/Home/MyItem") Context.Item.Fields["FieldName"]   Hope this helps.

    Read the article

  • How to configure TATA Photon+ EC1261 HUAWEI

    - by user3215
    I'm running ubuntu 10.04. I have a newly purchased TATA Photon+ Internet connection which supports Windows and Mac. On the Internet I found a article saying that it could be configured on Linux. I followed the steps to install it on Ubuntu from this link. I am still not able to get online, and need some help. Also, it is very slow, but I was told that I would see speeds up to 3.1MB. I dont have wvdial installed and cannot install it from apt as I'm not connected to internet Booting from windows I dowloaded "wvdial" .deb package and tried to install on ubuntu but it's ended with dependency problem. Automatically, don't know how, I got connected to internet only for once. Immediately I installed wvdial package after this I followed the tutorials(I could not browse and upload the files here) . From then it's showing that the device is connected in the network connections but no internet connection. Once I disable the device, it won't show as connected again and I'll have to restart my system. Sometimes the device itself not detected(wondering if there is any command to re-read the all devices). output of wvdialconf /etc/wvdial.cof: #wvdialconf /etc/wvdial.conf Editing `/etc/wvdial.conf'. Scanning your serial ports for a modem. ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. Modem Port Scan<*1>: S1 S2 S3 WvModem<*1>: Cannot get information for serial port. ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud ttyUSB0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. WvModem<*1>: Cannot get information for serial port. ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud ttyUSB1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. WvModem<*1>: Cannot get information for serial port. ttyUSB2<*1>: ATQ0 V1 E1 -- OK ttyUSB2<*1>: ATQ0 V1 E1 Z -- OK ttyUSB2<*1>: ATQ0 V1 E1 S0=0 -- OK ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK ttyUSB2<*1>: Modem Identifier: ATI -- Manufacturer: +GMI: HUAWEI TECHNOLOGIES CO., LTD ttyUSB2<*1>: Speed 9600: AT -- OK ttyUSB2<*1>: Max speed is 9600; that should be safe. ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK Found a modem on /dev/ttyUSB2. Modem configuration written to /etc/wvdial.conf. ttyUSB2<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" output of wvdial: #wvdial --> WvDial: Internet dialer version 1.60 --> Cannot get information for serial port. --> Initializing modem. --> Sending: ATZ ATZ OK --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 OK --> Sending: AT+CRM=1 AT+CRM=1 OK --> Modem initialized. --> Sending: ATDT#777 --> Waiting for carrier. ATDT#777 CONNECT --> Carrier detected. Starting PPP immediately. --> Starting pppd at Sat Oct 16 15:30:47 2010 --> Pid of pppd: 5681 --> Using interface ppp0 --> pppd: (u;[08]@s;[08]`{;[08] --> pppd: (u;[08]@s;[08]`{;[08] --> pppd: (u;[08]@s;[08]`{;[08] --> pppd: (u;[08]@s;[08]`{;[08] --> pppd: (u;[08]@s;[08]`{;[08] --> pppd: (u;[08]@s;[08]`{;[08] --> local IP address 14.96.147.104 --> pppd: (u;[08]@s;[08]`{;[08] --> remote IP address 172.29.161.223 --> pppd: (u;[08]@s;[08]`{;[08] --> primary DNS address 121.40.152.90 --> pppd: (u;[08]@s;[08]`{;[08] --> secondary DNS address 121.40.152.100 --> pppd: (u;[08]@s;[08]`{;[08] Output of log message /var/log/messages: Oct 16 15:29:44 avyakta-desktop pppd[5119]: secondary DNS address 121.242.190.180 Oct 16 15:29:58 desktop pppd[5119]: Terminating on signal 15 Oct 16 15:29:58 desktop pppd[5119]: Connect time 0.3 minutes. Oct 16 15:29:58 desktop pppd[5119]: Sent 0 bytes, received 177 bytes. Oct 16 15:29:58 desktop pppd[5119]: Connection terminated. Oct 16 15:30:47 desktop pppd[5681]: pppd 2.4.5 started by root, uid 0 Oct 16 15:30:47 desktop pppd[5681]: Using interface ppp0 Oct 16 15:30:47 desktop pppd[5681]: Connect: ppp0 <--> /dev/ttyUSB2 Oct 16 15:30:47 desktop pppd[5681]: CHAP authentication succeeded Oct 16 15:30:47 desktop pppd[5681]: CHAP authentication succeeded Oct 16 15:30:48 desktop pppd[5681]: local IP address 14.96.147.104 Oct 16 15:30:48 desktop pppd[5681]: remote IP address 172.29.161.223 Oct 16 15:30:48 desktop pppd[5681]: primary DNS address 121.40.152.90 Oct 16 15:30:48 desktop pppd[5681]: secondary DNS address 121.40.152.100 EDIT 1 : I tried the following sudo stop network-manager sudo killall modem-manager sudo /usr/sbin/modem-manager --debug > ~/mm.log 2>&1 & sudo /usr/sbin/NetworkManager --no-daemon > ~/nm.log 2>&1 & Output of mm.log: #vim ~/mm.log: ** Message: Loaded plugin Option High-Speed ** Message: Loaded plugin Option ** Message: Loaded plugin Huawei ** Message: Loaded plugin Longcheer ** Message: Loaded plugin AnyData ** Message: Loaded plugin ZTE ** Message: Loaded plugin Ericsson MBM ** Message: Loaded plugin Sierra ** Message: Loaded plugin Generic ** Message: Loaded plugin Gobi ** Message: Loaded plugin Novatel ** Message: Loaded plugin Nokia ** Message: Loaded plugin MotoC Output of nm.log: #vim ~/nm.log: NetworkManager: <info> starting... NetworkManager: <info> modem-manager is now available NetworkManager: SCPlugin-Ifupdown: init! NetworkManager: SCPlugin-Ifupdown: update_system_hostname NetworkManager: SCPluginIfupdown: guessed connection type (eth0) = 802-3-ethernet NetworkManager: SCPlugin-Ifupdown: update_connection_setting_from_if_block: name:eth0, type:802-3-ethernet, id:Ifupdown (eth0), uuid: 681b428f-beaf-8932-dce4-678ed5bae28e NetworkManager: SCPlugin-Ifupdown: addresses count: 1 NetworkManager: SCPlugin-Ifupdown: No dns-nameserver configured in /etc/network/interfaces NetworkManager: nm-ifupdown-connection.c.119 - invalid connection read from /etc/network/interfaces: (1) addresses NetworkManager: SCPluginIfupdown: management mode: unmanaged NetworkManager: SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:14.4/0000:02:02.0/net/eth1, iface: eth1) NetworkManager: SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:14.4/0000:02:02.0/net/eth1, iface: eth1): no ifupdown configuration found. NetworkManager: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/lo, iface: lo) @

    Read the article

  • WCF fails to deserialize correct(?) response message security headers (Security header is empty)

    - by Soeteman
    I'm communicating with an OC4J webservice, using a WCF client. The client is configured as follows: <basicHttpBinding> <binding name="MyBinding"> <security mode="TransportWithMessageCredential"> <transport clientCredentialType="None" proxyCredentialType="None" realm=""/> <message clientCredentialType="UserName" algorithmSuite="Default"/> </security> </binding> My clientcode looks as follows: ServicePointManager.CertificatePolicy = new AcceptAllCertificatePolicy(); string username = ConfigurationManager.AppSettings["user"]; string password = ConfigurationManager.AppSettings["pass"]; // client instance maken WebserviceClient client = new WebserviceClient(); client.Endpoint.Binding = new BasicHttpBinding("MyBinding"); // credentials toevoegen client.ClientCredentials.UserName.UserName = username; client.ClientCredentials.UserName.Password = password; //uitvoeren request var response = client.Ping(); I've altered the CertificatePolicy to accept all certificates, because I need to insert Charles (ssl proxy) in between client and server to intercept the actual Xml that is sent across te wire. My request looks as follows: <s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/" xmlns:u="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd"> <s:Header> <o:Security s:mustUnderstand="1" xmlns:o="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"> <u:Timestamp u:Id="_0"> <u:Created>2010-04-01T09:47:01.161Z</u:Created> <u:Expires>2010-04-01T09:52:01.161Z</u:Expires> </u:Timestamp> <o:UsernameToken u:Id="uuid-9b39760f-d504-4e53-908d-6125a1827aea-21"> <o:Username>user</o:Username> <o:Password o:Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username- token-profile-1.0#PasswordText">pass</o:Password> </o:UsernameToken> </o:Security> </s:Header> <s:Body> <getPrdStatus xmlns="http://mynamespace.org/wsdl"> <request xmlns="" xmlns:a="http://mynamespace.org/wsdl" xmlns:i="http://www.w3.org/2001/XMLSchema-instance"> <a:IsgrStsRequestTypeUser> <a:prdCode>LEPTO</a:prdCode> <a:sequenceNumber i:nil="true" /> <a:productionType i:nil="true" /> <a:statusDate>2010-04-01T11:47:01.1617641+02:00</a:statusDate> <a:ubn>123456</a:ubn> <a:animalSpeciesCode>RU</a:animalSpeciesCode> </a:IsgrStsRequestTypeUser> </request> </getPrdStatus> </s:Body> </s:Envelope> In return, I receive the following response: <env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ns0="http://mynamespace.org/wsdl"> <env:Header> <wsse:Security xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" env:mustUnderstand="1" /> </env:Header> <env:Body> <ns0:getPrdStatusResponse> <result> <ns0:IsgrStsResponseTypeUser> <ns0:prdCode>LEPTO</ns0:prdCode> <ns0:color>green</ns0:color> <ns0:stsCode>LEP1</ns0:stsCode> <ns0:sequenceNumber xsi:nil="1" /> <ns0:productionType xsi:nil="1" /> <ns0:IAndRCode>00</ns0:IAndRCode> <ns0:statusDate>2010-04-01T00:00:00.000+02:00</ns0:statusDate> <ns0:description>Gecertificeerd vrij</ns0:description> <ns0:ubn>123456</ns0:ubn> <ns0:animalSpeciesCode>RU</ns0:animalSpeciesCode> <ns0:name>gecertificeerd vrij</ns0:name> <ns0:ranking>17</ns0:ranking> </ns0:IsgrStsResponseTypeUser> </result> </ns0:getPrdStatusResponse> </env:Body> </env:Envelope> Why can't WCF deserialize this response header? I'm getting a "Security header is empty" exception: Server stack trace: at System.ServiceModel.Security.ReceiveSecurityHeader.Process(TimeSpan timeout) at System.ServiceModel.Security.TransportSecurityProtocol.VerifyIncomingMessageCore(Message& message, TimeSpan timeout) at System.ServiceModel.Security.TransportSecurityProtocol.VerifyIncomingMessage(Message& message, TimeSpan timeout) at System.ServiceModel.Security.SecurityProtocol.VerifyIncomingMessage(Message& message, TimeSpan timeout, SecurityProtocolCorrelationState[] correlationStates) at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.ProcessReply(Message reply, SecurityProtocolCorrelationState correlationState, TimeSpan timeout) at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.Request(Message message, TimeSpan timeout) at System.ServiceModel.Dispatcher.RequestChannelBinder.Request(Message message, TimeSpan timeout) at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout) at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs) at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation) at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message) Who knows what is going on here? I've already tried Rick Strahl's suggestion and removed the timestamp from the request header. Any help greatly appreciated!

    Read the article

  • JAX-RS JSON java.util.Date Unmarshall

    - by user229498
    Hi, I'm using Jersey (jax-rs), to build a REST rich application. Everything is great, but I really don't understand how to set in JSON Marshalling and Unmarshalling converting option for dates and numbers. I have a User class: @XmlRootElement public class User { private String username; private String password; private java.util.Date createdOn; // ... getters and setters } When createdOn property is serialized, a string like this: '2010-05-12T00:00:00+02:00', but I need to choose date Pattern both, to marshall and unmarshall. Someone knows hot to do that? Thank's a lot, Davide.

    Read the article

  • Can't parse a 1904 date in ARPA format (email date)

    - by Ramon
    I'm processing an IMAP mailbox and running into trouble parsing the dates using the mxDateTime package. In particular, early dates like "Fri, 1 Jan 1904 00:43:25 -0400" is causing trouble: >>> import mx.DateTime >>> import mx.DateTime.ARPA >>> mx.DateTime.ARPA.ParseDateTimeUTC("Fri, 1 Jan 1904 00:43:25 -0400").gmtoffset() Traceback (most recent call last): File "<interactive input>", line 1, in <module> Error: cannot convert value to a time value >>> mx.DateTime.ARPA.ParseDateTimeUTC("Thu, 1 Jan 2009 00:43:25 -0400").gmtoffset() <mx.DateTime.DateTimeDelta object for '-08:00:00.00' at 1497b60> >>> Note that an almost identical date from 2009 works fine. I can't find any description of date limitations in mxDateTime itself. Any ideas why this might be? Thx, Ramon

    Read the article

  • Setting selected item in custom Zend_Form_Element

    - by sanders
    Hello Everyone, I have created my own little form element for inputting time's. Since I need this on a few places in my application, i decided to create a seperate element for it. Here is the code so fa: class EventManager_Form_Element_Time extends Zend_Form_Element { public function init() { parent::init(); $this->addDecorator('ViewScript', array( 'viewScript' => 'time.phtml' )); $this->addValidator(new Zend_Validate_Regex('/^[0-9]+:[0-9]+:[0-9]+$/')); } public function setValue($value) { if(is_array($value)) { @list($hours, $minutes, $seconds) = $value; $value = sprintf('%s:%s:%s', $hours, $minutes, $seconds); } return parent::setValue($value); } } The corresponding view script, which I have created is: <?php @list($hours, $minutes, $seconds) = explode(':', $this->element->getValue()); ?> <dt> <?= $this->formLabel($this->element->getName(), $this->element->getLabel()); ?> </dt> <dd> <select id="<?= $this->element->getName();?>"> <option value="00">00</option> <option value="01">01</option> <option value="02">02</option> <option value="03">03</option> <option value="04">04</option> <option value="05">05</option> <option value="06">06</option> <option value="07">07</option> <option value="08">08</option> <option value="09">09</option> <option value="10">10</option> <option value="11">11</option> <option value="12">12</option> <option value="13">13</option> <option value="14">14</option> <option value="15">15</option> <option value="16">16</option> <option value="17">17</option> <option value="18">18</option> <option value="19">19</option> <option value="20">20</option> <option value="21">21</option> <option value="22">22</option> <option value="23">23</option> </select> <select id="<?= $this->element->getName();?>"> <option value="00">00</option> <option value="15">15</option> <option value="30">30</option> <option value="45">45</option> </select> <input id="<?= $this->element->getName(); ?>" type="hidden" name="<?= $this->element->getName(); ?>[]" value="00" /> <?php if(count($this->element->getMessages()) > 0): ?> <?= $this->formErrors($this->element->getMessages()); ?> <?php endif; ?> </dd> My problem is that sometimes i want to set a default selected value to my selecboxes when I populate my form. The question is how? Is there anyone that could help me out with this? Thanks.

    Read the article

  • WD MBWE II (White Strip Light) 2TB - unable to access data

    - by user210477
    I have a WD MBWE II (White Strip Light) 2TB - (WD20000H2NC-00) Was working fine until a few days ago. I guess there was a power failure and after that I am unable to access the 'Public' or the 'Download' folder anymore. I have been searching for answers everywhere but came up empty handed. Web GUI still works, SSH works. I hooked up both the drives on my PC and UFS Explorer sees the drive. But so far I am unable to retrieve any of my data. I do not remember what RAID setting I used when I first got the drive. I can see from GUI that it is set as "Stripe". The drive contains 10 years of family pictures which I really do not want to loose. Sadly and stupidly, I didn't even keep a backup of this drive. Can somebody please help or point me in the right direction. Thank you in advance for your help. Disk Utility on Ubuntu reports 1405 bad sectors on one drive. How can I retrieve my data? Please help. Logs below: ~ # mdadm --detail /dev/md[012345678] /dev/md0: Version : 0.90 Creation Time : Wed Jul 15 08:36:17 2009 Raid Level : raid1 Array Size : 1959872 (1914.26 MiB 2006.91 MB) Used Dev Size : 1959872 (1914.26 MiB 2006.91 MB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Fri Nov 1 13:53:29 2013 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : 04f7a661:98983b3b:26b29e4f:9b646adb Events : 0.266 Number Major Minor RaidDevice State 0 8 1 0 active sync /dev/sda1 1 8 17 1 active sync /dev/sdb1 /dev/md1: Version : 0.90 Creation Time : Wed Jul 15 08:36:18 2009 Raid Level : raid1 Array Size : 256896 (250.92 MiB 263.06 MB) Used Dev Size : 256896 (250.92 MiB 263.06 MB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 1 Persistence : Superblock is persistent Update Time : Wed Oct 30 22:08:21 2013 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : aaa7b859:c475312d:efc5a766:6526b867 Events : 0.10 Number Major Minor RaidDevice State 0 8 2 0 active sync /dev/sda2 1 8 18 1 active sync /dev/sdb2 /dev/md2: Version : 0.90 Creation Time : Sat Sep 25 10:01:26 2010 Raid Level : raid0 Array Size : 1947045760 (1856.85 GiB 1993.77 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Fri Nov 1 13:30:53 2013 State : active Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 Chunk Size : 64K UUID : 01dae60a:6831077b:77f74530:8680c183 Events : 0.97 Number Major Minor RaidDevice State 0 8 4 0 active sync /dev/sda4 1 8 20 1 active sync /dev/sdb4 /dev/md3: Version : 0.90 Creation Time : Wed Jul 15 08:36:18 2009 Raid Level : raid1 Array Size : 987904 (964.91 MiB 1011.61 MB) Used Dev Size : 987904 (964.91 MiB 1011.61 MB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 3 Persistence : Superblock is persistent Update Time : Fri Nov 1 13:26:33 2013 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : 3f4099f2:72e6171b:5ba962fd:48464a62 Events : 0.54 Number Major Minor RaidDevice State 0 8 3 0 active sync /dev/sda3 1 8 19 1 active sync /dev/sdb3 mdadm: md device /dev/md4 does not appear to be active. mdadm: md device /dev/md5 does not appear to be active. mdadm: md device /dev/md6 does not appear to be active. mdadm: md device /dev/md7 does not appear to be active. mdadm: md device /dev/md8 does not appear to be active. ~ # cat /etc/mtab securityfs /sys/kernel/security securityfs rw 0 0 /dev/md2 /DataVolume xfs rw,usrquota 0 0 /dev/md4 /ExtendVolume xfs rw,usrquota 0 0 ~ # df -k Filesystem 1k-blocks Used Available Use% Mounted on /dev/md0 1929044 145092 1685960 8% / /dev/md3 972344 123452 799500 13% /var /dev/ram0 63412 20 63392 0% /mnt/ram ~ # mdadm -D /dev/md2 /dev/md2: Version : 0.90 Creation Time : Sat Sep 25 10:01:26 2010 Raid Level : raid0 Array Size : 1947045760 (1856.85 GiB 1993.77 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Fri Nov 1 13:30:53 2013 State : active Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 Chunk Size : 64K UUID : 01dae60a:6831077b:77f74530:8680c183 Events : 0.97 Number Major Minor RaidDevice State 0 8 4 0 active sync /dev/sda4 1 8 20 1 active sync /dev/sdb4 ~ # mdadm -D /dev/md4 mdadm: md device /dev/md4 does not appear to be active. ~ # mount /dev/root on / type ext3 (rw,noatime,data=ordered) proc on /proc type proc (rw) sys on /sys type sysfs (rw) /dev/pts on /dev/pts type devpts (rw) securityfs on /sys/kernel/security type securityfs (rw) /dev/md3 on /var type ext3 (rw,noatime,data=ordered) /dev/ram0 on /mnt/ram type tmpfs (rw) ~ # cat /var/log/messages Oct 29 18:04:50 shmotashNAS daemon.warn wixEvent[3462]: Network Link - NIC 1 link is down. Oct 29 18:04:59 shmotashNAS daemon.info wixEvent[3462]: Network Link - NIC 1 link is up 100 Mbps full duplex. Oct 29 18:04:59 shmotashNAS daemon.info wixEvent[3462]: Network IP Address - NIC 1 use static IP address 192.168.1.102 Oct 29 18:17:45 shmotashNAS daemon.warn wixEvent[3462]: Network Link - NIC 1 link is down. Oct 29 18:17:53 shmotashNAS daemon.info wixEvent[3462]: Network Link - NIC 1 link is up 100 Mbps full duplex. Oct 29 18:17:53 shmotashNAS daemon.info wixEvent[3462]: Network IP Address - NIC 1 use static IP address 192.168.1.102 Oct 30 00:50:11 shmotashNAS daemon.warn wixEvent[3462]: Network Link - NIC 1 link is down. Oct 30 00:50:19 shmotashNAS daemon.info wixEvent[3462]: Network Link - NIC 1 link is up 100 Mbps full duplex. Oct 30 00:50:19 shmotashNAS daemon.info wixEvent[3462]: Network IP Address - NIC 1 use static IP address 192.168.1.102 Oct 30 16:29:47 shmotashNAS daemon.warn wixEvent[3462]: Network Link - NIC 1 link is down. Oct 30 16:30:00 shmotashNAS daemon.info wixEvent[3462]: Network Link - NIC 1 link is up 100 Mbps full duplex. Oct 30 16:30:00 shmotashNAS daemon.info wixEvent[3462]: Network IP Address - NIC 1 use static IP address 192.168.1.102 Oct 30 18:27:22 shmotashNAS daemon.warn wixEvent[3462]: Network Link - NIC 1 link is down. Oct 30 18:27:30 shmotashNAS daemon.info wixEvent[3462]: Network Link - NIC 1 link is up 100 Mbps full duplex. Oct 30 18:27:30 shmotashNAS daemon.info wixEvent[3462]: Network IP Address - NIC 1 use static IP address 192.168.1.102 Oct 30 19:06:03 shmotashNAS daemon.warn wixEvent[3462]: Network Link - NIC 1 link is down. Oct 30 19:06:10 shmotashNAS daemon.info wixEvent[3462]: Network Link - NIC 1 link is up 100 Mbps full duplex. Oct 30 19:06:10 shmotashNAS daemon.info wixEvent[3462]: Network IP Address - NIC 1 use static IP address 192.168.1.102 Oct 30 19:14:58 shmotashNAS daemon.warn wixEvent[3462]: Media Server - Media Server cannot find the path to one or more of the default folders: /Public/Shared Music, /Public/Shared Pictures or /Public/Shared Videos. Please verify that these folders have not been removed or that the names have not been changed. Oct 30 19:20:05 shmotashNAS daemon.alert wixEvent[3462]: Thermal Alarm - System temperature exceeded threshold.(66 degrees) Oct 30 19:58:29 shmotashNAS daemon.alert wixEvent[3462]: HDD SMART - HDD 1 SMART Health Status: Failed. Oct 30 22:05:39 shmotashNAS daemon.info init: Starting pid 13043, console /dev/null: '/usr/bin/killall' Oct 30 22:05:39 shmotashNAS syslog.info System log daemon exiting. Oct 30 22:08:09 shmotashNAS syslog.info syslogd started: BusyBox v1.1.1 Oct 30 22:08:09 shmotashNAS daemon.warn wixEvent[3557]: Network Link - NIC 1 link is down. Oct 30 22:08:19 shmotashNAS daemon.info wixEvent[3557]: Network Link - NIC 1 link is up 100 Mbps full duplex. Oct 30 22:08:25 shmotashNAS daemon.warn wixEvent[3557]: Network Link - NIC 1 link is down. Oct 30 22:08:37 shmotashNAS daemon.info wixEvent[3557]: Network Link - NIC 1 link is up 100 Mbps full duplex. Oct 30 22:08:44 shmotashNAS daemon.warn wixEvent[3557]: Network Link - NIC 1 link is down. Oct 30 22:08:46 shmotashNAS syslog.info miocrawler: +++++++++++++++ START OF ./miocrawler at 2013:10:30 - 22:08:46 [Version 01.09.00.96] ++++++++++++++ Oct 30 22:08:46 shmotashNAS syslog.info miocrawler: mc_db_init ... Oct 30 22:08:46 shmotashNAS syslog.info miocrawler: ****** database does not exist. ret = -1, creating path Oct 30 22:08:49 shmotashNAS syslog.info miocrawler: === mc_db_init ...Done. Oct 30 22:08:50 shmotashNAS syslog.info miocrawler: mcUtilsInit() Creating free queue pool Oct 30 22:08:51 shmotashNAS syslog.info miocrawler: === mcUtilsInit() Done. Oct 30 22:08:51 shmotashNAS syslog.info miocrawler: === inotify init done. Oct 30 22:08:51 shmotashNAS syslog.info miocrawler: mc_trans_updater_init() ... Oct 30 22:08:52 shmotashNAS syslog.info miocrawler: === mc_trans_updater_init() ...Done. Oct 30 22:08:52 shmotashNAS syslog.info miocrawler: === Walking directory done. Oct 30 22:08:57 shmotashNAS daemon.info wixEvent[3557]: Network Link - NIC 1 link is up 100 Mbps full duplex. Oct 30 22:08:57 shmotashNAS daemon.info wixEvent[3557]: Network IP Address - NIC 1 use static IP address 192.168.1.102 Oct 30 22:08:57 shmotashNAS daemon.info wixEvent[3557]: Network IP Address - NIC 1 use static IP address 192.168.1.102 Oct 30 22:08:57 shmotashNAS daemon.info wixEvent[3557]: Network IP Address - NIC 1 use static IP address 192.168.1.102 Oct 30 22:09:10 shmotashNAS daemon.info init: Starting pid 4605, console /dev/null: '/bin/touch' Oct 30 22:09:10 shmotashNAS daemon.info init: Starting pid 4607, console /dev/ttyS0: '/sbin/getty' Oct 30 22:09:10 shmotashNAS daemon.info wixEvent[3557]: System Startup - System startup. Oct 30 22:09:16 shmotashNAS daemon.warn wixEvent[3557]: Media Server - Media Server cannot find the path to one or more of the default folders: /Public/Shared Music, /Public/Shared Pictures or /Public/Shared Videos. Please verify that these folders have not been removed or that the names have not been changed. Oct 30 22:14:14 shmotashNAS daemon.warn wixEvent[3557]: Network Link - NIC 1 link is down. Oct 30 22:14:21 shmotashNAS daemon.info wixEvent[3557]: Network Link - NIC 1 link is up 100 Mbps full duplex. Oct 30 22:14:21 shmotashNAS daemon.info wixEvent[3557]: Network IP Address - NIC 1 use static IP address 192.168.1.102 Oct 30 22:29:36 shmotashNAS daemon.warn wixEvent[3557]: System Reboot - System will reboot. Oct 30 22:29:40 shmotashNAS daemon.info init: Starting pid 5974, console /dev/null: '/usr/bin/killall' Oct 30 22:29:40 shmotashNAS syslog.info System log daemon exiting. Oct 30 22:47:56 shmotashNAS syslog.info syslogd started: BusyBox v1.1.1 Oct 30 22:47:56 shmotashNAS daemon.warn wixEvent[3461]: Network Link - NIC 1 link is down. Oct 30 22:48:02 shmotashNAS daemon.info wixEvent[3461]: Network Link - NIC 1 link is up 100 Mbps full duplex. Oct 30 22:48:02 shmotashNAS daemon.info wixEvent[3461]: Network IP Address - NIC 1 use static IP address 192.168.1.102 Oct 30 22:48:09 shmotashNAS syslog.info miocrawler: +++++++++++++++ START OF ./miocrawler at 2013:10:30 - 22:48:09 [Version 01.09.00.96] ++++++++++++++ Oct 30 22:48:09 shmotashNAS syslog.info miocrawler: mc_db_init ... Oct 30 22:48:09 shmotashNAS syslog.info miocrawler: ++++++++ database exists: ret = 0 Oct 30 22:48:10 shmotashNAS syslog.info miocrawler: === mc_db_init ...Done. Oct 30 22:48:10 shmotashNAS syslog.info miocrawler: mcUtilsInit() Creating free queue pool Oct 30 22:48:11 shmotashNAS syslog.info miocrawler: === mcUtilsInit() Done. Oct 30 22:48:11 shmotashNAS syslog.info miocrawler: === inotify init done. Oct 30 22:48:11 shmotashNAS syslog.info miocrawler: mc_trans_updater_init() ... Oct 30 22:48:11 shmotashNAS syslog.info miocrawler: === mc_trans_updater_init() ...Done. Oct 30 22:48:11 shmotashNAS syslog.info miocrawler: === Walking directory done. Oct 30 22:48:27 shmotashNAS daemon.info init: Starting pid 4079, console /dev/null: '/bin/touch' Oct 30 22:48:27 shmotashNAS daemon.info init: Starting pid 4080, console /dev/ttyS0: '/sbin/getty' Oct 30 22:48:28 shmotashNAS daemon.info wixEvent[3461]: System Startup - System startup. Oct 30 22:49:01 shmotashNAS daemon.warn wixEvent[3461]: Media Server - Media Server cannot find the path to one or more of the default folders: /Public/Shared Music, /Public/Shared Pictures or /Public/Shared Videos. Please verify that these folders have not been removed or that the names have not been changed. Oct 30 23:51:11 shmotashNAS daemon.warn wixEvent[3461]: System Reboot - System will reboot. Oct 30 23:51:16 shmotashNAS daemon.info init: Starting pid 6498, console /dev/null: '/usr/bin/killall' Oct 30 23:51:16 shmotashNAS syslog.info System log daemon exiting. Oct 30 23:54:19 shmotashNAS syslog.info syslogd started: BusyBox v1.1.1 Oct 30 23:55:37 shmotashNAS daemon.info wixEvent[3476]: Network Link - NIC 1 link is up 100 Mbps full duplex. Oct 30 23:55:37 shmotashNAS daemon.info wixEvent[3476]: Network IP Address - NIC 1 use static IP address 192.168.1.102 Oct 30 23:55:44 shmotashNAS syslog.info miocrawler: +++++++++++++++ START OF ./miocrawler at 2013:10:30 - 23:55:44 [Version 01.09.00.96] ++++++++++++++ Oct 30 23:55:44 shmotashNAS syslog.info miocrawler: mc_db_init ... Oct 30 23:55:44 shmotashNAS syslog.info miocrawler: ++++++++ database exists: ret = 0 Oct 30 23:55:45 shmotashNAS syslog.info miocrawler: === mc_db_init ...Done. Oct 30 23:55:45 shmotashNAS syslog.info miocrawler: mcUtilsInit() Creating free queue pool Oct 30 23:55:46 shmotashNAS syslog.info miocrawler: === mcUtilsInit() Done. Oct 30 23:55:46 shmotashNAS syslog.info miocrawler: === inotify init done. Oct 30 23:55:46 shmotashNAS syslog.info miocrawler: mc_trans_updater_init() ... Oct 30 23:55:46 shmotashNAS syslog.info miocrawler: === mc_trans_updater_init() ...Done. Oct 30 23:55:46 shmotashNAS syslog.info miocrawler: === Walking directory done. Oct 30 23:55:58 shmotashNAS daemon.info init: Starting pid 4115, console /dev/null: '/bin/touch' Oct 30 23:55:58 shmotashNAS daemon.info init: Starting pid 4116, console /dev/ttyS0: '/sbin/getty' Oct 30 23:55:58 shmotashNAS daemon.info wixEvent[3476]: System Startup - System startup. Oct 30 23:56:33 shmotashNAS daemon.warn wixEvent[3476]: Media Server - Media Server cannot find the path to one or more of the default folders: /Public/Shared Music, /Public/Shared Pictures or /Public/Shared Videos. Please verify that these folders have not been removed or that the names have not been changed. Oct 31 00:29:14 shmotashNAS auth.info sshd[5409]: Server listening on 0.0.0.0 port 22. Oct 31 00:31:25 shmotashNAS auth.info sshd[5486]: Accepted password for root from 192.168.1.100 port 50785 ssh2 Oct 31 00:33:44 shmotashNAS auth.info sshd[5565]: Accepted password for root from 192.168.1.100 port 50817 ssh2 Oct 31 00:36:39 shmotashNAS daemon.info init: Starting pid 5680, console /dev/null: '/usr/bin/killall' Oct 31 00:36:39 shmotashNAS syslog.info System log daemon exiting. Oct 31 00:40:44 shmotashNAS syslog.info syslogd started: BusyBox v1.1.1 Oct 31 00:40:51 shmotashNAS daemon.info wixEvent[3464]: Network Link - NIC 1 link is up 100 Mbps full duplex. Oct 31 00:40:51 shmotashNAS daemon.info wixEvent[3464]: Network IP Address - NIC 1 use static IP address 192.168.1.102 Oct 31 00:41:00 shmotashNAS syslog.info miocrawler: +++++++++++++++ START OF ./miocrawler at 2013:10:31 - 00:41:00 [Version 01.09.00.96] ++++++++++++++ Oct 31 00:41:00 shmotashNAS syslog.info miocrawler: mc_db_init ... Oct 31 00:41:00 shmotashNAS syslog.info miocrawler: ++++++++ database exists: ret = 0 Oct 31 00:41:00 shmotashNAS syslog.info miocrawler: === mc_db_init ...Done. Oct 31 00:41:01 shmotashNAS syslog.info miocrawler: mcUtilsInit() Creating free queue pool Oct 31 00:41:02 shmotashNAS syslog.info miocrawler: === mcUtilsInit() Done. Oct 31 00:41:02 shmotashNAS syslog.info miocrawler: === inotify init done. Oct 31 00:41:02 shmotashNAS syslog.info miocrawler: mc_trans_updater_init() ... Oct 31 00:41:02 shmotashNAS syslog.info miocrawler: === mc_trans_updater_init() ...Done. Oct 31 00:41:02 shmotashNAS syslog.info miocrawler: === Walking directory done. Oct 31 00:41:14 shmotashNAS daemon.info init: Starting pid 4101, console /dev/null: '/bin/touch' Oct 31 00:41:14 shmotashNAS daemon.info init: Starting pid 4102, console /dev/ttyS0: '/sbin/getty' Oct 31 00:41:15 shmotashNAS daemon.info wixEvent[3464]: System Startup - System startup. Oct 31 00:41:47 shmotashNAS daemon.warn wixEvent[3464]: Media Server - Media Server cannot find the path to one or more of the default folders: /Public/Shared Music, /Public/Shared Pictures or /Public/Shared Videos. Please verify that these folders have not been removed or that the names have not been changed. Oct 31 01:13:19 shmotashNAS daemon.info init: Starting pid 5385, console /dev/null: '/usr/bin/killall' Oct 31 01:13:19 shmotashNAS syslog.info System log daemon exiting. Nov 1 13:26:25 shmotashNAS syslog.info syslogd started: BusyBox v1.1.1 Nov 1 13:26:32 shmotashNAS daemon.info wixEvent[3471]: Network Link - NIC 1 link is up 100 Mbps full duplex. Nov 1 13:26:32 shmotashNAS daemon.info wixEvent[3471]: Network IP Address - NIC 1 use static IP address 192.168.1.102 Nov 1 13:26:38 shmotashNAS syslog.info miocrawler: +++++++++++++++ START OF ./miocrawler at 2013:11:01 - 13:26:38 [Version 01.09.00.96] ++++++++++++++ Nov 1 13:26:38 shmotashNAS syslog.info miocrawler: mc_db_init ... Nov 1 13:26:38 shmotashNAS syslog.info miocrawler: ++++++++ database exists: ret = 0 Nov 1 13:26:39 shmotashNAS syslog.info miocrawler: === mc_db_init ...Done. Nov 1 13:26:39 shmotashNAS syslog.info miocrawler: mcUtilsInit() Creating free queue pool Nov 1 13:26:40 shmotashNAS syslog.info miocrawler: === mcUtilsInit() Done. Nov 1 13:26:40 shmotashNAS syslog.info miocrawler: === inotify init done. Nov 1 13:26:40 shmotashNAS syslog.info miocrawler: mc_trans_updater_init() ... Nov 1 13:26:40 shmotashNAS syslog.info miocrawler: === mc_trans_updater_init() ...Done. Nov 1 13:26:40 shmotashNAS syslog.info miocrawler: === Walking directory done. Nov 1 13:26:52 shmotashNAS daemon.info init: Starting pid 4078, console /dev/null: '/bin/touch' Nov 1 13:26:52 shmotashNAS daemon.info init: Starting pid 4079, console /dev/ttyS0: '/sbin/getty' Nov 1 13:26:52 shmotashNAS daemon.info wixEvent[3471]: System Startup - System startup. Nov 1 13:27:28 shmotashNAS daemon.warn wixEvent[3471]: Media Server - Media Server cannot find the path to one or more of the default folders: /Public/Shared Music, /Public/Shared Pictures or /Public/Shared Videos. Please verify that these folders have not been removed or that the names have not been changed. Nov 1 13:44:48 shmotashNAS auth.info sshd[5375]: Accepted password for root from 192.168.1.103 port 50217 ssh2 Nov 1 13:51:08 shmotashNAS auth.info sshd[5894]: Accepted password for root from 192.168.1.103 port 50380 ssh2

    Read the article

  • "domain crashed" when creating new Xen instance

    - by user47650
    I have downloaded a Xen virtual machine image from the appscale project, and I am trying to start it up. However once I run the command; xm create -c -f xen.conf The instance immediately crashes and provides no console output. however it produces logs that I have posted below. but this is the error; [2011-03-01 12:34:03 xend.XendDomainInfo 3580] WARNING (XendDomainInfo:1178) Domain has crashed: name=appscale-1.4b id=10. I have managed to mount the root.img file locally and verify that it is actually an ext3 file system. I am running Xen 3.0.3 that is a stock RPM from the CentOS 5 repos; # rpm -qa | grep -i xen xen-libs-3.0.3-105.el5_5.5 xen-3.0.3-105.el5_5.5 xen-libs-3.0.3-105.el5_5.5 kernel-xen-2.6.18-194.32.1.el5 any suggestions on how to proceed with troubleshooting? (i am a newbie to Xen) so far I have enabled console logging, but the log file is empty. ==> domain-builder-ng.log <== xc_dom_allocate: cmdline=" ip=:1.2.3.4::::eth0:dhcp root=/dev/sda1 ro xencons=tty console=tty1 console=hvc0 debugger=y debug=y sync_console", features="" xc_dom_kernel_file: filename="/boot/vmlinuz-2.6.27-7-server" xc_dom_malloc_filemap : 2284 kB xc_dom_ramdisk_file: filename="/boot/initrd.img-2.6.27-7-server" xc_dom_malloc_filemap : 9005 kB xc_dom_boot_xen_init: ver 3.1, caps xen-3.0-x86_64 xen-3.0-x86_32p xc_dom_parse_image: called xc_dom_find_loader: trying ELF-generic loader ... failed xc_dom_find_loader: trying Linux bzImage loader ... xc_dom_malloc : 9875 kB xc_dom_do_gunzip: unzip ok, 0x234bb2 -> 0x9a4de0 OK elf_parse_binary: phdr: paddr=0x200000 memsz=0x447000 elf_parse_binary: phdr: paddr=0x647000 memsz=0xab888 elf_parse_binary: phdr: paddr=0x6f3000 memsz=0x908 elf_parse_binary: phdr: paddr=0x6f4000 memsz=0x1c2f9c elf_parse_binary: memory: 0x200000 -> 0x8b6f9c elf_xen_parse_note: GUEST_OS = "linux" elf_xen_parse_note: GUEST_VERSION = "2.6" elf_xen_parse_note: XEN_VERSION = "xen-3.0" elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000 elf_xen_parse_note: ENTRY = 0xffffffff8071e200 elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff80209000 elf_xen_parse_note: FEATURES = "!writable_page_tables|pae_pgdir_above_4gb" elf_xen_parse_note: PAE_MODE = "yes" elf_xen_parse_note: LOADER = "generic" elf_xen_parse_note: unknown xen elf note (0xd) elf_xen_parse_note: SUSPEND_CANCEL = 0x1 elf_xen_parse_note: HV_START_LOW = 0xffff800000000000 elf_xen_parse_note: PADDR_OFFSET = 0x0 elf_xen_addr_calc_check: addresses: virt_base = 0xffffffff80000000 elf_paddr_offset = 0x0 virt_offset = 0xffffffff80000000 virt_kstart = 0xffffffff80200000 virt_kend = 0xffffffff808b6f9c virt_entry = 0xffffffff8071e200 xc_dom_parse_elf_kernel: xen-3.0-x86_64: 0xffffffff80200000 -> 0xffffffff808b6f9c xc_dom_mem_init: mem 1024 MB, pages 0x40000 pages, 4k each xc_dom_mem_init: 0x40000 pages xc_dom_boot_mem_init: called x86_compat: guest xen-3.0-x86_64, address size 64 xc_dom_malloc : 2048 kB ==> xend.log <== [2011-03-01 12:34:01 xend.XendDomainInfo 3580] INFO (XendDomainInfo:2330) Dev 2049 still active, looping... [2011-03-01 12:34:01 xend.XendDomainInfo 3580] INFO (XendDomainInfo:2330) Dev 2049 still active, looping... [2011-03-01 12:34:01 xend.XendDomainInfo 3580] INFO (XendDomainInfo:2330) Dev 2049 still active, looping... [2011-03-01 12:34:01 xend.XendDomainInfo 3580] INFO (XendDomainInfo:2330) Dev 2049 still active, looping... [2011-03-01 12:34:01 xend.XendDomainInfo 3580] INFO (XendDomainInfo:957) Dev 0 still active, looping... [2011-03-01 12:34:01 xend.XendDomainInfo 3580] INFO (XendDomainInfo:957) Dev 0 still active, looping... [2011-03-01 12:34:01 xend.XendDomainInfo 3580] INFO (XendDomainInfo:957) Dev 0 still active, looping... [2011-03-01 12:34:02 xend.XendDomainInfo 3580] INFO (XendDomainInfo:957) Dev 0 still active, looping... [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:2114) UUID Created: True [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:2115) Devices to release: [], domid = 9 [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:2127) Releasing PVFB backend devices ... [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:207) XendDomainInfo.create(['domain', ['domid', 9], ['uuid', 'd5f22dd4-8dc2-f51f-84e9-eea7d71ea1d0'], ['vcpus', 1], ['vcpu_avail', 1], ['cpu_cap', 0], ['cpu_weight', 256], ['memory', 1024], ['shadow_memory', 0], ['maxmem', 1024], ['features', ''], ['name', 'appscale-1.4b'], ['on_poweroff', 'destroy'], ['on_reboot', 'restart'], ['on_crash', 'restart'], ['image', ['linux', ['kernel', '/boot/vmlinuz-2.6.27-7-server'], ['ramdisk', '/boot/initrd.img-2.6.27-7-server'], ['ip', ':1.2.3.4::::eth0:dhcp'], ['root', '/dev/sda1 ro'], ['args', 'xencons=tty console=tty1 console=hvc0 debugger=y debug=y sync_console']]], ['cpus', []], ['device', ['vif', ['backend', 0], ['script', 'vif-bridge'], ['mac', '00:16:3B:72:10:E4']]], ['device', ['vbd', ['backend', 0], ['dev', 'sda1:disk'], ['uname', 'file:/local/xen/domains/appscale1.4/root.img'], ['mode', 'w']]], ['state', '----c-'], ['shutdown_reason', 'crash'], ['cpu_time', 0.000339131], ['online_vcpus', 1], ['up_time', '0.952092885971'], ['start_time', '1299011639.92'], ['store_mfn', 1169289], ['console_mfn', 1169288]]) [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:329) parseConfig: config is ['domain', ['domid', 9], ['uuid', 'd5f22dd4-8dc2-f51f-84e9-eea7d71ea1d0'], ['vcpus', 1], ['vcpu_avail', 1], ['cpu_cap', 0], ['cpu_weight', 256], ['memory', 1024], ['shadow_memory', 0], ['maxmem', 1024], ['features', ''], ['name', 'appscale-1.4b'], ['on_poweroff', 'destroy'], ['on_reboot', 'restart'], ['on_crash', 'restart'], ['image', ['linux', ['kernel', '/boot/vmlinuz-2.6.27-7-server'], ['ramdisk', '/boot/initrd.img-2.6.27-7-server'], ['ip', ':1.2.3.4::::eth0:dhcp'], ['root', '/dev/sda1 ro'], ['args', 'xencons=tty console=tty1 console=hvc0 debugger=y debug=y sync_console']]], ['cpus', []], ['device', ['vif', ['backend', 0], ['script', 'vif-bridge'], ['mac', '00:16:3B:72:10:E4']]], ['device', ['vbd', ['backend', 0], ['dev', 'sda1:disk'], ['uname', 'file:/local/xen/domains/appscale1.4/root.img'], ['mode', 'w']]], ['state', '----c-'], ['shutdown_reason', 'crash'], ['cpu_time', 0.000339131], ['online_vcpus', 1], ['up_time', '0.952092885971'], ['start_time', '1299011639.92'], ['store_mfn', 1169289], ['console_mfn', 1169288]] [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:446) parseConfig: result is {'features': '', 'image': ['linux', ['kernel', '/boot/vmlinuz-2.6.27-7-server'], ['ramdisk', '/boot/initrd.img-2.6.27-7-server'], ['ip', ':1.2.3.4::::eth0:dhcp'], ['root', '/dev/sda1 ro'], ['args', 'xencons=tty console=tty1 console=hvc0 debugger=y debug=y sync_console']], 'cpus': [], 'vcpu_avail': 1, 'backend': [], 'uuid': 'd5f22dd4-8dc2-f51f-84e9-eea7d71ea1d0', 'on_reboot': 'restart', 'cpu_weight': 256.0, 'memory': 1024, 'cpu_cap': 0, 'localtime': None, 'timer_mode': None, 'start_time': 1299011639.9200001, 'on_poweroff': 'destroy', 'on_crash': 'restart', 'device': [('vif', ['vif', ['backend', 0], ['script', 'vif-bridge'], ['mac', '00:16:3B:72:10:E4']]), ('vbd', ['vbd', ['backend', 0], ['dev', 'sda1:disk'], ['uname', 'file:/local/xen/domains/appscale1.4/root.img'], ['mode', 'w']])], 'bootloader': None, 'maxmem': 1024, 'shadow_memory': 0, 'name': 'appscale-1.4b', 'bootloader_args': None, 'vcpus': 1, 'cpu': None} [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:1784) XendDomainInfo.construct: None [2011-03-01 12:34:02 xend 3580] DEBUG (balloon:145) Balloon: 3034420 KiB free; need 4096; done. [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:1953) XendDomainInfo.initDomain: 10 256.0 [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:1994) _initDomain:shadow_memory=0x0, maxmem=0x400, memory=0x400. [2011-03-01 12:34:02 xend 3580] DEBUG (balloon:145) Balloon: 3034412 KiB free; need 1048576; done. [2011-03-01 12:34:02 xend 3580] INFO (image:139) buildDomain os=linux dom=10 vcpus=1 [2011-03-01 12:34:02 xend 3580] DEBUG (image:208) domid = 10 [2011-03-01 12:34:02 xend 3580] DEBUG (image:209) memsize = 1024 [2011-03-01 12:34:02 xend 3580] DEBUG (image:210) image = /boot/vmlinuz-2.6.27-7-server [2011-03-01 12:34:02 xend 3580] DEBUG (image:211) store_evtchn = 1 [2011-03-01 12:34:02 xend 3580] DEBUG (image:212) console_evtchn = 2 [2011-03-01 12:34:02 xend 3580] DEBUG (image:213) cmdline = ip=:1.2.3.4::::eth0:dhcp root=/dev/sda1 ro xencons=tty console=tty1 console=hvc0 debugger=y debug=y sync_console [2011-03-01 12:34:02 xend 3580] DEBUG (image:214) ramdisk = /boot/initrd.img-2.6.27-7-server [2011-03-01 12:34:02 xend 3580] DEBUG (image:215) vcpus = 1 [2011-03-01 12:34:02 xend 3580] DEBUG (image:216) features = ==> domain-builder-ng.log <== xc_dom_build_image: called xc_dom_alloc_segment: kernel : 0xffffffff80200000 -> 0xffffffff808b7000 (pfn 0x200 + 0x6b7 pages) xc_dom_pfn_to_ptr: domU mapping: pfn 0x200+0x6b7 at 0x2aaaab5f6000 elf_load_binary: phdr 0 at 0x0x2aaaab5f6000 -> 0x0x2aaaaba3d000 elf_load_binary: phdr 1 at 0x0x2aaaaba3d000 -> 0x0x2aaaabae8888 elf_load_binary: phdr 2 at 0x0x2aaaabae9000 -> 0x0x2aaaabae9908 elf_load_binary: phdr 3 at 0x0x2aaaabaea000 -> 0x0x2aaaabb9a004 xc_dom_alloc_segment: ramdisk : 0xffffffff808b7000 -> 0xffffffff82382000 (pfn 0x8b7 + 0x1acb pages) xc_dom_malloc : 160 kB xc_dom_pfn_to_ptr: domU mapping: pfn 0x8b7+0x1acb at 0x2aaab0000000 xc_dom_do_gunzip: unzip ok, 0x8cb5e7 -> 0x1aca210 xc_dom_alloc_segment: phys2mach : 0xffffffff82382000 -> 0xffffffff82582000 (pfn 0x2382 + 0x200 pages) xc_dom_pfn_to_ptr: domU mapping: pfn 0x2382+0x200 at 0x2aaab1acb000 xc_dom_alloc_page : start info : 0xffffffff82582000 (pfn 0x2582) xc_dom_alloc_page : xenstore : 0xffffffff82583000 (pfn 0x2583) xc_dom_alloc_page : console : 0xffffffff82584000 (pfn 0x2584) nr_page_tables: 0x0000ffffffffffff/48: 0xffff000000000000 -> 0xffffffffffffffff, 1 table(s) nr_page_tables: 0x0000007fffffffff/39: 0xffffff8000000000 -> 0xffffffffffffffff, 1 table(s) nr_page_tables: 0x000000003fffffff/30: 0xffffffff80000000 -> 0xffffffffbfffffff, 1 table(s) nr_page_tables: 0x00000000001fffff/21: 0xffffffff80000000 -> 0xffffffff827fffff, 20 table(s) xc_dom_alloc_segment: page tables : 0xffffffff82585000 -> 0xffffffff8259c000 (pfn 0x2585 + 0x17 pages) xc_dom_pfn_to_ptr: domU mapping: pfn 0x2585+0x17 at 0x2aaab1ccb000 xc_dom_alloc_page : boot stack : 0xffffffff8259c000 (pfn 0x259c) xc_dom_build_image : virt_alloc_end : 0xffffffff8259d000 xc_dom_build_image : virt_pgtab_end : 0xffffffff82800000 xc_dom_boot_image: called arch_setup_bootearly: doing nothing xc_dom_compat_check: supported guest type: xen-3.0-x86_64 <= matches xc_dom_compat_check: supported guest type: xen-3.0-x86_32p xc_dom_update_guest_p2m: dst 64bit, pages 0x40000 clear_page: pfn 0x2584, mfn 0x11d788 clear_page: pfn 0x2583, mfn 0x11d789 xc_dom_pfn_to_ptr: domU mapping: pfn 0x2582+0x1 at 0x2aaab1ce2000 start_info_x86_64: called setup_hypercall_page: vaddr=0xffffffff80209000 pfn=0x209 domain builder memory footprint allocated malloc : 12139 kB anon mmap : 0 bytes mapped file mmap : 11289 kB domU mmap : 35 MB arch_setup_bootlate: shared_info: pfn 0x0, mfn 0xd6fe1 shared_info_x86_64: called vcpu_x86_64: called vcpu_x86_64: cr3: pfn 0x2585 mfn 0x11d787 launch_vm: called, ctxt=0x97b21f8 xc_dom_release: called ==> xend.log <== [2011-03-01 12:34:02 xend 3580] DEBUG (DevController:114) DevController: writing {'mac': '00:16:3B:72:10:E4', 'handle': '0', 'protocol': 'x86_64-abi', 'backend-id': '0', 'state': '1', 'backend': '/local/domain/0/backend/vif/10/0'} to /local/domain/10/device/vif/0. [2011-03-01 12:34:02 xend 3580] DEBUG (DevController:116) DevController: writing {'domain': 'appscale-1.4b', 'handle': '0', 'script': '/etc/xen/scripts/vif-bridge', 'state': '1', 'frontend': '/local/domain/10/device/vif/0', 'mac': '00:16:3B:72:10:E4', 'online': '1', 'frontend-id': '10'} to /local/domain/0/backend/vif/10/0. [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:634) Checking for duplicate for uname: /local/xen/domains/appscale1.4/root.img [file:/local/xen/domains/appscale1.4/root.img], dev: sda1:disk, mode: w [2011-03-01 12:34:02 xend 3580] DEBUG (blkif:27) exception looking up device number for sda1:disk: [Errno 2] No such file or directory: '/dev/sda1:disk' [2011-03-01 12:34:02 xend 3580] DEBUG (blkif:27) exception looking up device number for sda1: [Errno 2] No such file or directory: '/dev/sda1' [2011-03-01 12:34:02 xend 3580] DEBUG (DevController:114) DevController: writing {'virtual-device': '2049', 'device-type': 'disk', 'protocol': 'x86_64-abi', 'backend-id': '0', 'state': '1', 'backend': '/local/domain/0/backend/vbd/10/2049'} to /local/domain/10/device/vbd/2049. [2011-03-01 12:34:02 xend 3580] DEBUG (DevController:116) DevController: writing {'domain': 'appscale-1.4b', 'frontend': '/local/domain/10/device/vbd/2049', 'format': 'raw', 'dev': 'sda1', 'state': '1', 'params': '/local/xen/domains/appscale1.4/root.img', 'mode': 'w', 'online': '1', 'frontend-id': '10', 'type': 'file'} to /local/domain/0/backend/vbd/10/2049. [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:993) Storing VM details: {'shadow_memory': '0', 'uuid': 'd5f22dd4-8dc2-f51f-84e9-eea7d71ea1d0', 'on_reboot': 'restart', 'start_time': '1299011642.74', 'on_poweroff': 'destroy', 'name': 'appscale-1.4b', 'xend/restart_count': '0', 'vcpus': '1', 'vcpu_avail': '1', 'memory': '1024', 'on_crash': 'restart', 'image': "(linux (kernel /boot/vmlinuz-2.6.27-7-server) (ramdisk /boot/initrd.img-2.6.27-7-server) (ip :1.2.3.4::::eth0:dhcp) (root '/dev/sda1 ro') (args 'xencons=tty console=tty1 console=hvc0 debugger=y debug=y sync_console'))", 'maxmem': '1024'} [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:1028) Storing domain details: {'console/ring-ref': '1169288', 'console/port': '2', 'name': 'appscale-1.4b', 'console/limit': '1048576', 'vm': '/vm/d5f22dd4-8dc2-f51f-84e9-eea7d71ea1d0', 'domid': '10', 'cpu/0/availability': 'online', 'memory/target': '1048576', 'store/ring-ref': '1169289', 'store/port': '1'} [2011-03-01 12:34:02 xend 3580] DEBUG (DevController:158) Waiting for devices vif. [2011-03-01 12:34:02 xend 3580] DEBUG (DevController:164) Waiting for 0. [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:1250) XendDomainInfo.handleShutdownWatch [2011-03-01 12:34:02 xend 3580] DEBUG (DevController:509) hotplugStatusCallback /local/domain/0/backend/vif/10/0/hotplug-status. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:509) hotplugStatusCallback /local/domain/0/backend/vif/10/0/hotplug-status. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:523) hotplugStatusCallback 1. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:158) Waiting for devices usb. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:158) Waiting for devices vbd. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:164) Waiting for 2049. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:509) hotplugStatusCallback /local/domain/0/backend/vbd/10/2049/hotplug-status. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:509) hotplugStatusCallback /local/domain/0/backend/vbd/10/2049/hotplug-status. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:523) hotplugStatusCallback 1. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:158) Waiting for devices irq. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:158) Waiting for devices vkbd. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:158) Waiting for devices vfb. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:158) Waiting for devices pci. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:158) Waiting for devices ioports. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:158) Waiting for devices tap. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:158) Waiting for devices vtpm. [2011-03-01 12:34:03 xend.XendDomainInfo 3580] WARNING (XendDomainInfo:1178) Domain has crashed: name=appscale-1.4b id=10. [2011-03-01 12:34:03 xend.XendDomainInfo 3580] ERROR (XendDomainInfo:2654) VM appscale-1.4b restarting too fast (2.275545 seconds since the last restart). Refusing to restart to avoid loops. [2011-03-01 12:34:03 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:2189) XendDomainInfo.destroy: domid=10 ==> xen-hotplug.log <== Nothing to flush. ==> xend.log <== [2011-03-01 12:34:03 xend.XendDomainInfo 3580] INFO (XendDomainInfo:2330) Dev 2049 still active, looping... [2011-03-01 12:34:03 xend.XendDomainInfo 3580] INFO (XendDomainInfo:2330) Dev 2049 still active, looping... [2011-03-01 12:34:03 xend.XendDomainInfo 3580] INFO (XendDomainInfo:2330) Dev 2049 still active, looping... [2011-03-01 12:34:03 xend.XendDomainInfo 3580] INFO (XendDomainInfo:2330) Dev 2049 still active, looping... [2011-03-01 12:34:03 xend.XendDomainInfo 3580] INFO (XendDomainInfo:2330) Dev 2049 still active, looping... [2011-03-01 12:34:03 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:2114) UUID Created: True [2011-03-01 12:34:03 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:2115) Devices to release: [], domid = 10 [2011-03-01 12:34:03 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:2127) Releasing PVFB backend devices ... And this is the xen.conf file that I am using; # cat xen.conf # Configuration file for the Xen instance AppScale, created # bn VMBuilder kernel = '/boot/vmlinuz-2.6.27-7-server' ramdisk = '/boot/initrd.img-2.6.27-7-server' memory = 1024 vcpus = 1 root = '/dev/sda1 ro' disk = [ 'file:/local/xen/domains/appscale1.4/root.img,sda1,w', ] name = 'appscale-1.4b' dhcp = 'dhcp' vif = [ 'mac=00:16:3B:72:10:E4' ] on_poweroff = 'destroy' on_reboot = 'restart' on_crash = 'restart' extra = 'xencons=tty console=tty1 console=hvc0 debugger=y debug=y sync_console'

    Read the article

  • Excel Template Teaser

    - by Tim Dexter
    In lieu of some official documentation I'm in the process of putting together some posts on the new 10.1.3.4.1 Excel templates. No more HTML, maskerading as Excel; far more flexibility than Excel Analyzer and no need to write complex XSL templates to create the same output. Multi sheet outputs with macros and embeddable XSL commands are here. Their capabilities are pretty extensive and I have not worked on them for a few years since I helped put them together for EBS FSG users, so Im back on the learning curve. Let me say up front, there is no template builder, its a completely manual process to build them but, the results can be fantastic and provide yet another 'superstar' opportunity for you. The templates can take hierarchical XML data and walk the structure much like an RTF template. They use named cells/ranges and a hidden sheet to provide the rendering engine the hooks to drop the data in. As a taster heres the data and output I worked with on my first effort: <EMPLOYEES> <LIST_G_DEPT> <G_DEPT> <DEPARTMENT_ID>10</DEPARTMENT_ID> <DEPARTMENT_NAME>Administration</DEPARTMENT_NAME> <LIST_G_EMP> <G_EMP> <EMPLOYEE_ID>200</EMPLOYEE_ID> <EMP_NAME>Jennifer Whalen</EMP_NAME> <EMAIL>JWHALEN</EMAIL> <PHONE_NUMBER>515.123.4444</PHONE_NUMBER> <HIRE_DATE>1987-09-17T00:00:00.000-06:00</HIRE_DATE> <SALARY>4400</SALARY> </G_EMP> </LIST_G_EMP> <TOTAL_EMPS>1</TOTAL_EMPS> <TOTAL_SALARY>4400</TOTAL_SALARY> <AVG_SALARY>4400</AVG_SALARY> <MAX_SALARY>4400</MAX_SALARY> <MIN_SALARY>4400</MIN_SALARY> </G_DEPT> ... </LIST_G_DEPT> </EMPLOYEES> Structured XML coming from a data template, check out the data template progression post. I can then generate the following binary XLS file. There are few cool things to notice in this output. DEPARTMENT-EMPLOYEE master detail output. Not easy to do in the Excel analyzer. Date formatting - this is using an Excel function. Remember BIP generates XML dates in the canonical format. I have formatted the other data in the template using native Excel functionality Salary Total - although in the data I have calculated this in the template Conditional formatting - this is handled by Excel based on the incoming data Bursting department data across sheets and using the department name for the sheet name. This alone is worth the wait! there's more, but this is surely enough to whet your appetite. These new templates are already tucked away in EBS R12 under controlled release by the GL team and have now come to the BIEE and standalone releases in the 10.1.3.4.1+ rollup patch. For the rest of you, its going to be a bit of a waiting game for the relevant teams to uptake the latest BIP release. Look out for more soon with some explanation of how they work and how to put them together!

    Read the article

< Previous Page | 65 66 67 68 69 70 71 72 73 74 75 76  | Next Page >