Search Results

Search found 6065 results on 243 pages for 'usb modeswitch'.

Page 69/243 | < Previous Page | 65 66 67 68 69 70 71 72 73 74 75 76  | Next Page >

• Why do things change between using a LiveCD/LiveUSB and installing Ubuntu?

  - by ahow628

  Here have been a couple of weird experiences I've had with a Ubuntu LiveCD or LiveUSB: 1) I had one of the original Chromebooks (CR-48). I ended up wiping ChromeOS and installing only Ubuntu 12.04.0 just after it came out. It worked like a charm. About a year later, I broke something and reinstalled Ubuntu using 12.04.3 on a LiveUSB. The LiveUSB worked perfectly - screen resolution, wifi, trackpad all worked fine. I installed it (once installing updates, once stock from the USB drive) and both times screen resolution, wifi, and trackpad all broke. I ended up downloading 12.04.0 and installing it then upgrading to 12.04.3 after the fact and everything worked perfectly once again. 2) I purchased a Toshiba Portege z935 and the LiveUSB worked perfectly, namely the wifi. After install, wifi was extremely slow and basically couldn't load any pages. The answer was that Bluetooth conflicted somehow with wifi and Bluetooth had to be disabled to get wifi to work. Yet both could be enabled in the LiveUSB version, no problem. So my question is, why does this happen? Why does everything work perfectly from the LiveUSB version but then get broken when installed on the system? Is there a different way to install Ubuntu that would allow things to be installed over exactly as they were on the LiveUSB version (drivers, settings, etc)? Are there assumptions that the install makes that I could override somehow?

  Read the article

• Network and Storage Devices Throughput Chart

  - by zroiy

  With all of the different storage and network devices that surround our day to day life, understanding these devices data transfer speeds can be somewhat confusing. Think about trying to identify your weakest link in the a chain that starts with an external USB hard drive (or a flash drive) that's connected to a 802.11g wifi router, can you quickly come up with an answer of where's the bottle neck in that chain , is it the router or the storage devices ? . Well, the following chart should give you an idea understanding different devices, protocols and interfaces maximum throughput speeds. Though these numbers can fluctuate (mostly for worse, but sometimes for the better) due to different kind of factors such as OS overhead (or caching and optimization) , multiple users or processes and so on , the chart can still serve to provide basic information on the theoretical throughput different devices and protocols can get to.. Enjoy.  Link to the full size chart   References:http://en.wikipedia.org/wiki/Sata#SATA_revision_1.0_.28SATA_1.5_Gbit.2Fs.29http://en.wikipedia.org/wiki/Usbhttp://en.wikipedia.org/wiki/Usb_3http://en.wikipedia.org/wiki/802.11http://mashable.com/2011/09/21/fastest-download-speeds-infographic/http://en.wikipedia.org/wiki/Thunderbolt_(interface)http://www.computerworld.com/s/article/9220434/Thunderbolt_vs._SuperSpeed_USB_3.0  Icons:http://openiconlibrary.sourceforge.net/gallery2/?./Icons/devices/drive-harddisk-3.png      

  Read the article

• What functionality of an iPad can I use with Ubuntu?

  - by Andrew Ferrier

  What functionality of an iPad can I use with Ubuntu? I'm thinking about buying an iPad, but I only have Ubuntu PCs these days (no Windows, no Mac), and I'm nervous that it may be too reliant on the existence of iTunes. I'm less concerned about getting media onto and off it (and I have read that I can do this with libimobiledevice), but will I be able to activate it with iTunes? Does it need to be USB synced on a regular basis, or can I do most anything I want through the cloud (i.e. over wifi)? Edit: In answer to jrgifford's question, in theory, I'd like to do everything I would want to do with it were I using Windows/Mac. But more specifically, I think I'd want to: "Activate" it, if that's necessary Copy music / video onto it Install apps How much of this can I do without a Windows/Mac PC? Is it necessary to activate it? I don't think I'm that interested in backing it up (what would I back up?), but then again, maybe I'm confused as to how easy it is to get data on and off. Can I get a regular SFTP app for the iPad to copy data to my Ubuntu machine over wi-fi, for example?

  Read the article

• Ubuntu hangs after replugging the modem

  - by Iftekhar Ahmed Shafi

  I am facing this issue on Ubuntu 12.04, which is for my Wimax modem with beceem chipset. If I replug the device Ubuntu goes in hang state. Its happens very often. If I plug the USB and restart it works most of the time. But it is very annoying to restart every time it hangs. The modem works smoothly in Windows 7. And it used to work OK in Ubuntu 11.10. Jun 13 19:25:54 iftekhar-HP-520-Notebook-PC dbus[1102]: [system] Activating service name='org.freedesktop.UDisks' (using servicehelper) Jun 13 19:25:54 iftekhar-HP-520-Notebook-PC dbus[1102]: [system] Successfully activated service 'org.freedesktop.UDisks' Jun 13 19:26:00 iftekhar-HP-520-Notebook-PC goa[2168]: goa-daemon version 3.4.0 starting [main.c:112, main()] Jun 13 19:26:47 iftekhar-HP-520-Notebook-PC udevd[432]: timeout 'cdrom_id --lock-media /dev/sr1' Jun 13 19:26:48 iftekhar-HP-520-Notebook-PC udevd[432]: timeout: killing 'cdrom_id --lock-media /dev/sr1' [1072] Jun 13 19:26:49 iftekhar-HP-520-Notebook-PC kernel: [ 85.820162] sr 2:0:0:0: Device offlined - not ready after error recovery Jun 13 19:26:49 iftekhar-HP-520-Notebook-PC udevd[432]: timeout: killing 'cdrom_id --lock-media /dev/sr1' [1072] Jun 13 19:27:20 udevd[432]: last message repeated 31 times Jun 13 19:27:25 udevd[432]: last message repeated 4 times What can I do to avoid this hangs and restarts?

  Read the article

• Boot problems w/ External HDD

  - by JeremyT

  I'm having a problem with booting a live image off of a USB Hard Drive. I used Startup Disk Creator to make an Ubuntu 11.10 live image on a partition on my external so that I can use it on various computers. I set it up with ~4GB of persistent data So far I've tried it on two computers. One, a Dell, will boot to my external but it loads the select boot device very slowly. It hangs on a screen with an underscore for up to 5 minutes until it allows me to select which drive I want to boot from. After that, it works great. However, on my primary computer it doesn't work at all. It's an Acer from 2009 and it won't even recognize the drive. I don't see it anywhere in BIOS or the select boot disk list. The light on the external will come on at boot just fine so I know it's powering it at this time. Both computers worked perfectly with my 4GB flash drive that I had partitioned half and half (1st half FAT32 and second Ubuntu 11.10 live)

  Read the article

• Huawei e303c data-card not working for Ubuntu 11.04?

  - by Umashankar

  Cheers to you. I got a problem in making a Mobile-BroadBand connection in Ubuntu 11.04, using 'Huawei e303c' usb data-card. I'm using Tata Docomo 3G sim-card (India, circle: Maharastra). My observations: 1.) I installed the device's driver 'Mobile-Partner For Linux'(which came up with the device). But it is not detecting my device. 2.) In Network Manager, Adding a Mobile-BroadBand connection is not able to detect the device (with or without the device's driver installed). 3.)I tried softwares like usb_modeswitch, gnomeppp, wvdial, sakis3G and followed their guidelines. These too didn't work. 4.) Without the driver, the system is able to identify the device (Mobile-Partner icon comes-up, that leads to driver setup files). But after installing the driver, nothing comes-up there. 5.) In all the above cases, when 'lsusb' cmd is fired, the prompt shows the connected data card (as 'DEVICE_ID:VENDOR_ID Huawei Technologies Ltd.,'). This is my problem. Give a solution to get my device connected. -Umash

  Read the article

• Resize a pendrive Linux?

  - by user11239

  I'm running Ubuntu from USB media, which has a drive capacity of 250 GB, all existing as one FAT32 partition. However, when I created the bootable Ubuntu drive, only 4.79 GB were allocated for usage. Rather than put files directly into the /cdrom where the drive is mounted, I want to expand what is listed here in aufs to be at least 200 GB. I'm hopeful that I can do this live. Output of df : Filesystem 1K-blocks Used Available Use% Mounted on aufs 4051904 4050108 0 100% / none 1542852 284 1542568 1% /dev /dev/sdb1 244076800 4901648 239175152 3% /cdrom /dev/loop0 688000 688000 0 100% /rofs none 1547840 1496 1546344 1% /dev/shm tmpfs 1547840 4828 1543012 1% /tmp none 1547840 80 1547760 1% /var/run none 1547840 0 1547840 0% /var/lock none 1547840 0 1547840 0% /lib/init/rw Output of fdisk -l : Disk /dev/sdb: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00083fe4 Device Boot Start End Blocks Id System /dev/sdb1 * 1 30401 244196001 c W95 FAT32 (LBA) So basically what I want to do is get /dev/sdb1 to be entirely, or almost entirely read as aufs. I'm confused over how to do this, as the file systems are all part of /dev/sdb1 on one big partition, rather than separate partitions for separate file systems.

  Read the article

• How to get Wifi Working Properly - I am Noob

  - by user287853

  I'm a noob to Ubuntu, but not computers. I installed a full version of Ubuntu version 12 whatever it is. I run it on a machine that has Win7/Win8 on another hard drive. My wireless adapter is some tiny USB stick I got on eBay - it works great in Windows, but I can't get it to work in Ubuntu. More precisely, Ubuntu is providing me a list (sometimes) of wireless networks in the area and when I try to connect to mine it just keeps password prompting me even though the one I use is correct. I looked over all the settings multiple times and don't believe there is anything in error regarding what it takes to connect to my network. So, I thought maybe it is a driver issue and came across NDIS. I thought I should try installing it, but I don't know how when I can't connect the Ubuntu machine to the Internet. I tried some commands to no avail. I have the Ubuntu installation disc and it shows a NDIS common and utils .deb files in there. Can someone out there help me out to get this wireless setup so I can get online?

  Read the article

• Force startx to run X in a specific resolution and refresh Rate

  - by Z9iT

  From my past experience (using Win-Xp), this particular monitor works only on 60Hz , Best resolution being 1024x768. I have "installed and configured" Ubuntu 12.04 Minimal (on USB stick) so that most of the time terminal is used, however, whenever there is a need to enter GUI, I may issue startx command to go into gnome. However the problem is that on this particular system, issuing this command poses problem because its default refresh rate won't synchronize with the monitor. The display keep on flickering and utterly unreadable. It is visible that gnome has been loaded and default wallpaper and desktop items are visible. But the problem is due to refresh rate different than 60Hz. I am looking for a command attribute to startx command which will force the refresh rate to 60Hz and resolution preferably to 1204x768 I can open terminals with Ctrl+Alt+T and enter commands. Key combinations like Ctrl+Alt+NumPlus works flawlessly in distributions like solaris, but it's not working for me. Also the commands like xrandr -r 60 60 being refresh rate wont work. The same problem is faced even when I boot from a live CD

  Read the article

• How do I write to an outer truecrypt volume when the inner volume protection prevents writng?

  - by con-f-use

  In a nutshell After some time using the outer volume of a hidden volume in Truecrypt I cannot write to the outer volume anymore. The protection of the inner volume always kicks in before. How do I fix this? Details I'm using truecrypt's two layered encryption of a USB stick. The outer container carries my semi-sensitive stuff while the inner hidden values has a bit more valuable information. I use both, the inner and outer volume regularly and that is part of the problem. Truecrypt can mount the outer volume for writing while protecting the inner. Usually the inner volume, when not protected this way (or mounted read-only) would be indistinguishable from free space. That is of course part of the plausible deniability scheme of truecrypt. At the beginning, everything worked as expected. I could copy and delete data to the outer volume as I pleased. Now it seams that I have written and deleted enough data to have filled the outer volume once. Despite the write protection Ubuntu tries now to write to the continuous "free space" that is the inner volume. It does that although enough other free space is on the outer volume. But on this free space there used to be data so its fragmented and the file system write prefers continuous space. The write on the continuous free space of the outer volume of course fails (with the error message in the picture above) as Truecrypt's inner-volume-protection kicks in. The Question I know this is expected behaviour, but is there a better way to write to the outer volume that does not attempt to write to the hidden free space at the end? The whole question could be more generally rephrased to: How do I control, where on a partition data is written in Ubuntu?

  Read the article

• fwupd to update OCZ RevoDrive firmware gets a 'Permission denied' error

  - by Late

  Try as I might I just don't get it working (http://www.ocztechnology.com/ssd_tools/OCZ_RevoDrive_and_RevoDrive_X2/). There's another thread here with an similar issue here: Command is giving me "bash: ./fwupd: cannot execute binary file" I'm running command ./fwupd /dev/sdb which keeps returning me bash: ./fwupd: Permission denied I have tried running both bit versions available of fwupd with both of the latest 32- and 64-bit Ubunty 11.10, running the OS from an USB stick, but to no avail (could this be the problem?). In the other thread it was suggested that chmod +x fwupd (or chmod 0755 fwupd) should resolve this issue, but at least for me it has been for naught. It was also suggested to install certain libraries, but those were already included in the Ubunty build and I didn't have any luck after updating with apt-get. I also tried giving fwupd more privileges, r, x and w but same charade, run it in different ways from different places (where I'd have the fwupd present, ofc) among other things. What I also tried is giving the Ubunty 10.04 LTS a shot but it didn't even launch on either of my computers, though that's not the issue here. If anyone has any ideas on what the problem is and how I could get this working, it would be most appreciated!

  Read the article

• Lots of Internet browsing issues, all browsers

  - by dario_ramos

  Before the upgrade, everything was working fine. Now, however, I can connect to the Internet but a lot of stuff fails, and the weirdest thing is that it happens with Firefox, Chromium and Opera. Some of the things that fail: I can't log in to Stack Overflow, after entering user/pass it loads for a long time on Firefox and throws Error 408 (browser request timed out) on Chromium and Opera I can't log in to Hotmail, similar symptoms I can login to Facebook, but when I try to write a comment, or just post something in my wall, it stays loading for a long time, and then fails The first two issues seem to be related to secure pages, and the second one is another issue altogether, I believe. However, they all happen with all browsers, which is really weird. Talking about weird: I connect using a Huawei SmartAX MT 810 USB modem, which cost me blood and tears to get it working under Ubuntu. I ordered an ethernet modem/router with my ISP, and I'm still waiting, but this issue intrigues me anyway. Has anyone experienced this kind of problems? I Googled around, but couldn't find a similar case.

  Read the article

• Ubuntu live cd : black screen and blinking cursor

  - by IFasel

  I try to install ubuntu 12.04 on my computer. I can get to the purple screen on the live cd but then, if I choose "Installing Ubuntu", I have a black screen with a cursor blinking (and nothing else happens). My PC : acer aspire M3920, CPU i5-2300, 8 Gb RAM, NVIDIA gt 405. What I already tried : I tried with 12.04 and 13.04 daily build I tried with a live usb and with a live dvd I tried the following boot options : nomodset, acpi=off I googled a lot and it seems that it could be a graphic card problem. Do you know any other boot options that I could try ? UPDATE This is not a duplicate : I've tried all the common boot options (nomodeset, noacpi...) and it doesn't change anything. With the option "no splash" (instead of "quiet splash"), I can see what happens before the forever-blinking cursor : [sdg] no caching mode present [sdg] assuming drive cache : write trough ata8.00: excetion Emask 0x52 ... frozen ata8 : SError : { RecovData RecovComm UnrecovData...} ata8.00 : failed command : IDENTIFY PACKET DEVICE ... ata8.00 : status : { DRDY } ata8 : hard resetting link Does somebody know what it means ? N.B. astonishingly, Puppy Linux boots fine (but Debian, Fedora and Ubuntu do not) Solution In fact, it was not a graphic card problem. I had to disconnect the dvd drive and connect it to another free sata connector (I don't really understand why Ubuntu had trouble with this connector and Windows 7 not). After that, everything worked fine.

  Read the article

• Can this USB3 behaviour be anything else than a hardware failure?

  - by Jonas Wielicki

  While my motherboard is half a year old now (ASUS M5A99X EVO), I only recently made use of the USB3 boards (after purchase of USB3 external harddrive). However, I am encountering issues. I am running linux 3.6.7-4.fc16.x86_64. Initially, the harddrive worked fine with USB3 (amazing ˜160MB/s), but I had some problems after putting after putting the harddrive to sleep manually after use (backup) with hdparm -Y. After some time, the device disappears from lsusb and i see the following in dmesg: [ 1924.091107] xhci_hcd 0000:05:00.0: xHCI host not responding to stop endpoint command. [ 1924.091114] xhci_hcd 0000:05:00.0: Assuming host is dying, halting host. [ 1924.091147] xhci_hcd 0000:05:00.0: HC died; cleaning up [ 1924.091233] usb 11-1: USB disconnect, device number 2 [ 1924.091272] sd 6:0:0:0: Device offlined - not ready after error recovery Testing with my (USB3 capable) notebook, I could not immediately reproduce the behaivour. I put the drive to sleep with hdparm -Y and waited for like an hour, but it was still listed in lsusb and responded after a few seconds delay when I tried after the hour of waiting. After an hour, on the desktop, the device would've usually vanished. Googling for this issue, I came across hints that playing around with IOMMU settings and upgrading the BIOS might help. I upgraded the BIOS and tried both with and without IOMMU enabled, got similar results. Most disturbing is, that one of the two USB 3.0 hubs sometimes also disappears from lsusb (or does not show up after boot at all). I've also heard that there are some hardware issues with ASUS USB3 ports. Applying mechanic force to the capble doesn't push the issue to one side or the other. Also, udev seems to reenumerate all devices if I plug the HDD into the USB 3.0 port without success (I can notice from my keyboard layout being changed to the default, which I do not use normally). The drive is externally powered and the external power supply is plugged in (it also stays powered when unplugging from USB, although it will spin down then). So before I try to return the board, I wanted to find out whether this can be anything else than a failure on the motherboard?

  Read the article

• Installing on a mac without a CD burner or USB boot

  - by Rafael

  I am new to Ubuntu, i installed it in an old PC and now it works GREAT!!! My Macbook pro has a glitch and refuses to run Mac OS X, so i installed Windows, and i really want Ubuntu since Windows is not for me. Here's the problem(s) my drive only READS DVDs, if i put a blank in it, it will ignore it and my mac has the updated EFI, so no booting from a USB connected device! I also tried Wubi, but then i cant make it a FULL partition and get rid of windows!!! Thank you!

  Read the article

• How to Create a Portable Version of RocketDock for a USB Flash Drive

  - by Lori Kaufman

  RocketDock is a lightweight, highly customizable application launcher, or dock, for Windows. You can install it on your computer or use a portable version on a USB flash drive to provide quick access to your portable programs. We’ll show you how to make RocketDock portable. However, first you must install RocketDock before making it portable. See our article about installing, setting up, and using RocketDock. Once you have installed RocketDock, right-click anywhere on the dock or on the icons on the dock and select Dock Settings from the popup menu. HTG Explains: What Is RSS and How Can I Benefit From Using It? HTG Explains: Why You Only Have to Wipe a Disk Once to Erase It HTG Explains: Learn How Websites Are Tracking You Online

  Read the article

• Cannot connect to secure wireless with Netgear wna3100 USB

  - by Vince Radice

  I have installed Ubuntu 11.10. I used a wired connection to download and install all of the updates. When I tried to use a Netgear WNA3100 wireless USB network adapter, it failed. Much searching and trying things I was finally able to get it working by disabling security on my router. I have verified this by disabling security and I was able to connect. When I enabled security (WPA2 PSK), the connection failed. What is necessary to enable security (WPA2 PSK) and still use the Netgear USB interface? Here is the output from the commands most requested lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 0846:9020 NetGear, Inc. WNA3100(v1) Wireless-N 300 [Broadcom BCM43231] lshw -C network *-network description: Ethernet interface product: RTL-8139/8139C/8139C+ vendor: Realtek Semiconductor Co., Ltd. physical id: 3 bus info: pci@0000:02:03.0 logical name: eth0 version: 10 serial: 00:40:ca:44:e6:3e size: 10Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=half latency=32 link=no maxlatency=64 mingnt=32 multicast=yes port=MII speed=10Mbit/s resources: irq:19 ioport:c800(size=256) memory:ee011000-ee0110ff memory:40000000-4000ffff *-network description: Wireless interface physical id: 1 logical name: wlan0 serial: e0:91:f5:56:e1:0d capabilities: ethernet physical wireless configuration: broadcast=yes driver=ndiswrapper+bcmn43xx32 driverversion=1.56+,08/26/2009, 5.10.79.30 ip=192.168.1.104 link=yes multicast=yes wireless=IEEE 802.11g iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11g ESSID:"vincecarolradice" Mode:Managed Frequency:2.422 GHz Access Point: A0:21:B7:9F:E5:EE Bit Rate=121.5 Mb/s Tx-Power:32 dBm RTS thr:2347 B Fragment thr:2346 B Encryption key:off Power Management:off Link Quality:76/100 Signal level:-47 dBm Noise level:-96 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 ndiswrapper -l bcmn43xx32 : driver installed device (0846:9020) present lsmod | grep ndis ndiswrapper 193669 0 dmesg | grep -e ndis -e wlan [ 907.466392] ndiswrapper version 1.56 loaded (smp=yes, preempt=no) [ 907.838507] ndiswrapper (import:233): unknown symbol: ntoskrnl.exe:'IoUnregisterPlugPlayNotification' [ 907.838955] ndiswrapper: driver bcmwlhigh5 (Netgear,11/05/2009, 5.60.180.11) loaded [ 908.137940] wlan0: ethernet device e0:91:f5:56:e1:0d using NDIS driver: bcmwlhigh5, version: 0x53cb40b, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 0846:9020.F.conf [ 908.141879] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK [ 908.143048] usbcore: registered new interface driver ndiswrapper [ 908.178826] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 994.015088] usbcore: deregistering interface driver ndiswrapper [ 994.028892] ndiswrapper: device wlan0 removed [ 994.080558] ndiswrapper version 1.56 loaded (smp=yes, preempt=no) [ 994.374929] ndiswrapper: driver bcmn43xx32 (,08/26/2009, 5.10.79.30) loaded [ 994.404366] ndiswrapper (mp_init:219): couldn't initialize device: C0000001 [ 994.404384] ndiswrapper (pnp_start_device:435): Windows driver couldn't initialize the device (C0000001) [ 994.404666] ndiswrapper (mp_halt:262): device e05b6480 is not initialized - not halting [ 994.404671] ndiswrapper: device eth%d removed [ 994.404709] ndiswrapper: probe of 1-5:1.0 failed with error -22 [ 994.406318] usbcore: registered new interface driver ndiswrapper [ 2302.058692] wlan0: ethernet device e0:91:f5:56:e1:0d using NDIS driver: bcmn43xx32, version: 0x50a4f1e, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 0846:9020.F.conf [ 2302.060882] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK [ 2302.113838] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2354.611318] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 2355.268902] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 2365.400023] wlan0: no IPv6 routers present [ 2779.226096] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2779.422343] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2797.574474] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 2802.607937] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 2803.261315] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 2813.952028] wlan0: no IPv6 routers present [ 3135.738431] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3139.180963] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3139.816561] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.229872] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.444542] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.758297] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.860684] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3205.118732] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3205.139553] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3205.300542] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3353.341402] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3363.266399] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3363.505475] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3363.506619] ndiswrapper (set_iw_auth_mode:601): setting auth mode to 5 failed (00010003) [ 3363.717203] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3363.779206] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3405.206152] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3405.248624] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3405.577664] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3438.852457] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3438.908573] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.282995] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.325237] ndiswrapper (set_iw_auth_mode:601): setting auth mode to 5 failed (00010003) [ 3568.460716] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.461763] ndiswrapper (set_iw_auth_mode:601): setting auth mode to 5 failed (00010003) [ 3568.809776] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.880641] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3610.122848] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3610.148328] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3610.324502] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3636.088798] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3636.712186] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 3647.600040] wlan0: no IPv6 routers present I am using the system now with the router security turned off. When I submit this, I will turn security back on.

  Read the article

• How To Boot 10 Different Live CDs From 1 USB Flash Drive

  - by YatriTrivedi

  Ever get the urge to try out a bunch of Linux distros at once? Maybe you’re hosting a Linux installation party. Here’s an easy way to get a bunch of Live CDs working from a single thumb drive Latest Features How-To Geek ETC How To Boot 10 Different Live CDs From 1 USB Flash Drive The 20 Best How-To Geek Linux Articles of 2010 The 50 Best How-To Geek Windows Articles of 2010 The 20 Best How-To Geek Explainer Topics for 2010 How to Disable Caps Lock Key in Windows 7 or Vista How to Use the Avira Rescue CD to Clean Your Infected PC Tune Pop Enhances Android Music Notifications Another Busy Night in Gotham City Wallpaper Classic Super Mario Brothers Theme for Chrome and Iron Experimental Firefox Builds Put Tabs on the Title Bar (Available for Download) Android Trojan Found in the Wild Chaos, Panic, and Disorder Wallpaper

  Read the article

• Boot Ubuntu from a bootable USB hangs on purple screen

  - by user210946

  I recently bought a laptop (Lenovo Y410P) with Windows 8 pre-installed and I'm trying to dual boot Windows 8 and Ubuntu 13.0. I created a bootable usb using Pendrive. Then I changed the Boot Mode to Legacy Support and the boot order so it boots from the flash storage first. When I restarted the computer, I got the error message "SYSLINUX 4.06 EDD 2012-10-23 Copyright (c) 1994-2012 H. Peter Anvin et al" and it just hung there. Fair enough. After some googling I formatted my flash drive in FAT format instead of FAT32. The "SYSLINUX..." error message is gone but now it hangs on a purple screen http://imgur.com/WbdXpZN Does anyone have a suggestion what to do here? I've looked at various posts but none of them seems to have a solution that the author confirmed it worked.

  Read the article

• Grub failure after cat removed USB drive

  - by user76270

  I had a perfectly working Ubuntu Server system with U12.4 and Server installed and was setting up the mail system. When I was absent from my computer room my cat (furry type) apparently got to play with a USB dongle on an extension cable and removed it. The system went berserk and now will not boot. I ran Ubuntu 12.4 on the install disk and the directory structure and every thing appears to still be on the drives. How do I recover the GRUB boot section without the system repartitioning everything and wiping everything else? Please I am a total newb when it comes to Linux errors and fixing them.

  Read the article

• How to Access Boot Options 12.04 Live USB

  - by Ryan Kampmeier

  I'm attempting to install 12.04 on my computer but booting from my USB drive results in a blank screen. This has happened since 10.04 and has always been fixed by putting nomodeset in the boot command, but now I can't access the boot options with F6 for some reason. How can I access the boot options? I booted into the live image on a different computer and it worked fine. I'm sure it's because of my Nvidia graphics. When I boot into the live image it shows a small gray box in the lower left corner of the screen and that's it. I can't edit the boot options or do anything else. Thanks in advance.

  Read the article

• Grub rescue after installing Ubuntu from USB

  - by Victor Suarez

  I have Windows 7 installed in my internal HDD and wanted to try out Ubuntu so I have an USB to put Ubuntu LiveUSB on and installed Ubuntu on a external HDD and everything worked out fine. Now the problem. If I remove the external HDD and try to boot Windows normally it shows the grub rescue screen. The only way to boot into Windows is by having the external HDD attached. Is there any way I can make it so I won't have to have the external HDD attached to be able to boot my Windows 7?

  Read the article

• Can I make a bootable USB flash drive for Mac from Windows

  - by Patrick

  Problem: MacBook hard drive crashed and is ruined. I need to work on a music assignment on a program only available for Mac OS X and Ubuntu, and will not be able to get a new hard drive for the Mac before the assignment is due. I only have non-administrator access to Windows XP and 7 computers. Can I make a USB drive with Ubuntu on it so I can use my MacBook with this? Can I create this from a Windows computer? Please give detailed steps, if possible, for I am a noob when it comes to computers, and especially Linux.

  Read the article

• Wifi USB interface being detected after some time

  - by Dani

  I've got a wifi interface connected by USB (its chipset is the zd1211b, which I think it works with the zyd driver). When I log into my ubuntu 12.04 it don't detect the inteface but after waiting an indeterminate amount of time (sometimes a few minutes, sometimes half an hour or more) it is detected and it works fine. It's just to weird and also very annoying because you don't know when are you going to be able to use the wireless connection. Any solution to this? Can I force somehow the SO to detect the interface?

  Read the article

• Ubuntu will not load up from my USB

  - by Ryan Mungwira

  I have a Sony Vaio Duo 13 and I am trying to get Ubuntu 13.10 to run on a partition on my Ultrabook but it will not load up from the USB drive. It goes to the black screen that asks if you just want to Try Ubuntu or if you want to Install it. I click just to try and it will not load. It acts like it is going to start up but then it just goes to a blank black screen and then I have to a hard restart. It does that when I click install as well. And I have tried disabling the Secure Install on my computer as well and nothing happens! What do I do?!?

  Read the article

< Previous Page | 65 66 67 68 69 70 71 72 73 74 75 76  | Next Page >