Search Results

Search found 6065 results on 243 pages for 'usb modeswitch'.

Page 66/243 | < Previous Page | 62 63 64 65 66 67 68 69 70 71 72 73  | Next Page >

• How can I use a CanoScan N640Pex scanner over a USB/parallel cable?

  - by detly

  I have an old CanoScan N640Pex flat bed scanner and a USB-to-parallel port cable through which I can connect it to my PC. Unfortunately neither Simple Scan nor XSane detect the scanner. I'm running Ubuntu 12.04 (plus updates and backports) with kernel 3.2.0-31-generic. dmesg tells me this when I plus the cable in: [256411.641910] usb 7-1: new full-speed USB device number 10 using uhci_hcd [256411.872392] usblp0: USB Bidirectional printer dev 10 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [256411.872417] usbcore: registered new interface driver usblp lsusb shows this device for my cable: Bus 007 Device 010: ID 067b:2305 Prolific Technology, Inc. PL2305 Parallel Port The device node created is /dev/usb/lp0 crw-rw---- 1 root lp 180, 0 Sep 9 17:46 /dev/usb/lp0 There is no extra information from any of these commands when I attach the scanner to the cable and power it on, though. I suspect I might need to change something in /etc/sane.d/canon_pp.conf, but I have no idea what to put for the ieee1284 line, since there is pretty much zero documentation for that parameter. So how can I get it to work?

  Read the article

• "Host usb device connections disabled" in VMware???

  - by ZlateWay

  I installed Linux, Windows XP and Chrome OS in VMware Workstation 7 and in every OS the USB host doesn't work. When I start some of the Operative Systems this message shows up: "host usb device connections disabled" and under that : "The connection to the VMware USB Arbitration Service was unsuccessful. Please check the status of this service in the Microsoft Management Console." So what to do? What do I need to install to make the usb host work? BTW I use Windows 7 as a host OS. Thanks

  Read the article

• Serial connection over a single USB cable (Windows to linux, or linux to linux)

  - by andyortlieb

  I'm helping out with a project for an embedded device that only has USB and no serial. This device is running Linux. These days, when we need to connect to a serial port on a device we typically use a USB to serial adapter (on something like a phone system or a load balancing device, etc). I would like to know if it is possible to have the host device behave as though it were a serial adapter, thus removing the need for one. Given the nature of USB, is this approach even necessary? To recap, I would like to be able to connect a single A-to-A USB cable from my workstation (be it windows or linux) to this device, for the purpose of administration (especially initial setup), using minicom, putty or hyperterminal. Thanks

  Read the article

• Can a usb cable carry 12v?

  - by zm15

  Here's what i'm wanting to do. I have a Acer Iconia A500 tablet. I want to plug it in, in the car, but it has a barrel plug and I don't want to buy an inverter. The car adapters are expensive for what they do. I already have a 2.1 amp usb car charger meant for the iPad: http://www.amazon.com/Kensington-K33497US-PowerBolt-Charger-Compatible/dp/tech-data/B003PU01M4/ref=de_a_smtd And i want to use this usb cable from the 2.1 amp port to plug into the A500: http://www.amazon.com/gp/product/B00304DZ7I/ref=ox_sc_act_title_2?ie=UTF8&m=A1HPBDJJIXKXS7 Here are the specs on the original wall charger if that helps: http://www.phihong.com/assets/pdf/PSA18R.pdf The usb cable says it's 5v, but the original charger says it outputs 12v. But since it's just a cable... wasn't sure if that really made a whole lot of difference since it's only 1.5 amps from the wall charger. Is it possible to use that usb cable through the powerbolt car charger, to charge the A500?

  Read the article

• Unable to boot with Windows 2008 DVD / USB Key

  - by r0ca

  Hi everyone, I am trying to install Windows 2008 server on a HP Proliant DL180 G5. There is no built-in DVD reader so I need to use my LaCie USB one. When I put the CD in and boot from the USB DVD on the server, I get the error message: Boot Failed! Please insert boot media in selected boot device. So I tried with another Windows bootable CD and still no luck. What I've done then, I copied the installation DVD on my 16go USB key. Again, impossible to boot from the USB Key. I have 2 147go SAS 15k HDD on my server. They are not showing in the Bios. I was wondering if this is a reason why nothing will boot on it. I am trying to find a way to deploy Windows 2008 server on my HP server as soon as possible. If you guys have ideas, feel free to let me know :) Best regards, David. System Information: HP Proliant DL180 G5 Quad-Core 2.5 4GO Ram 2x 147GO SAS 15k P.S. This is my first installation ever on SAS/SCSI HDD. Thanks a bunch! Edit: Well, my bad! I purchased a new USB DVD and now I can install Windows 2008 server. Thanks a bunch for your help!

  Read the article

• USB Keyboard not working under windows 7 x64?

  - by Comboo

  I have two usb keyboards, one no-name cheapo thing and an old logitech. When i plug them in to my computer they pop up in device manager as "Unknown device" respective "USB-receiver". Both of them fail to install any drivers, neighter automatically or through windows update. Both keyboards work perfectly on another computer i have with vista 32bit. Can this be one of those cases where a device does not work in 64bit version of windows? I doubt it though since I've never had that problem before with any device and i thought that basic things like keyboards would be kind of failsafe. I don't really know how to start debugging this issue. I've tried all the obvious, rebooting, changing usb-port etc. Are there any generic x64 keyboard drivers you can use? Is there any way to find the manufacturer of the keyboard over usb? There is nothing written on it.

  Read the article

• Share a USB sound card over a network/bluetooth (Mac & PC)

  - by AlexW

  I've been wondering how I can stream audio to an external Edirol USB sound card, wirelessly, on both Mac and PC. I'm not looking for high quality transmission, just to play mp3s from my Mac laptop to a USB sound card that is attached to two very nice balanced studio reference monitors. Is there any way I can firstly power the sound card box, and secondly, provide with an audio stream along it's USB input. I've looked at the Belkin USB hub, and I have a Time Capsule with the AirPort interface inside. These things seem to do vaguely what I want but when it comes to audio, the specifications are less clear. Any suggestions very welcome.

  Read the article

• open pdf when usb is plugged in

  - by Funky Dude

  i have a pdf file in an usb drive. how do i get it to open automatically when i plug the usb drive. no dialog or anything. just open the pdf directly after usb drive is plugged in. let's say we have to do this in win xp. autorun.inf doesnt seem to be able to do it.

  Read the article

• Installing Windows 7 from USB on a Thinkpad T61

  - by Halik

  I am trying to install Windows 7 Professional from USB 3.0 flashdrive, on a Thinkpad T61. The problem is, Thinkpads BIOS will not detect the flash drive as bootable medium, and won't allow to boot from it. What I did: Enabled USB BIOS Support in BIOS (it was on by default) In startup menu, added USB HDD to boot order (it has '-' sign in front of it) Created Windows 7 install media with UNetbootin, WinUSB (linux tool) dd and Grub4DOS. As you can tell, currently, I only have access to Linux machine to make the flashdrive. What happens: The T61 BIOS shows '-USB HDD' in boot order menu. The '-' sign suggests that the plugged flash drive is currently not bootable. The same flashdrive (with the same Windows image on it) is booting without any problems on a Dell D430 and Lenovo Y550. Also, Ubuntu 12.04 install USB created with Unetbootin shows as bootable ('+' sign in BIOS boot order menu) and boots from the F12 boot menu. Additional info thinkwiki.org says that some Thinkpad BIOSes do not use MBR on flashdrives. It suggests using Extended-IPL boot loader, but the provided links are broken and there seems to be no mirrors. Solution: http://superuser.com/a/430186/54970

  Read the article

• Boot from USB at booting time win Windows 7

  - by MA1

  Hello Everyone hope you will be fine and good. 1) I need a tool/software that i can run from USB at boot time 2) How to boot the USB at booting time 3) and...how to run that progam/tool/software Actually, what i want to do is to copy some files from hardisk to USB at boot. Can anyone help...or point me to some useful link/book etc... Thanks.

  Read the article

• Make a file non-deletable in USB

  - by MegaNairda

  Somebody used my USB drive and upon returning it to me, I found a autorun.inf that is undeletable. I tried changing it's file attribute which is only H (not even set as a system file) but it keeps on saying Access Denied. The USB is set on FAT32, upon asking my friend, he told me that he uses Panda USB Vaccine http://research.pandasecurity.com/Panda-USB-and-AutoRun-Vaccine/ How do they do this? Im trying to use some Disk Sector editor but have no idea which hex file they change to make this kind of file and make it deletable again. Formatting the drive removes it, but I'm curious as to how to be able to set those kind of file attribute.

  Read the article

• UEFI - Linux Mint Boot from USB Doesn't work

  - by Joe Bennett

  I'm running Linux Mint (only OS other than in VirtualBox) and wanting to remove it. I've created a Live USB of Windows 8 using Windows 7 USB/DVD Download Tool - Yes, I know it says Windows 7 but I've been doing research and I am hearing from everywhere that it also works for Windows 8. The ISO was loaded on just fine (AFAIK) Computer came with Windows 8 pre-installed I have Safe boot and Fast boot disabled in the BIOS Settings I have USB as my first boot option I have tried both the USB 2.0 and 3.0 ports Yet, Mint is all that will boot up. Anybody have a similar issue? If it helps, the computer is a Toshiba Satellite S855D Laptop with an AMD APU quad-core processor (3 CPU, 1 GPU)

  Read the article

• Make a bootable USB drive that can install both Windows XP and Ubuntu

  - by Utkarsh

  I have ISO images for both Ubuntu and Windows XP. I want to host both of them on a USB drive so that I can install either without needing installation CDs (I don't have a CD drive). How can I do that? SO, I want to have both Windows XP and Ubuntu on my USB Drive so that i could install any one of tem just from a USB. I do not have CD Drive thats why i wanna do that. I have ISO image of both ubuntu and windows xp

  Read the article

• Connecting a USB laptop to a RJ45 serial port

  - by Jon

  We are about to get our first managed switch at work (Procurve 2520G-24-PoE), and this lowly programmer gets to put on his admin hat and try to configure it. The switch has an RJ45 serial port for console access. My laptop has USB ports but no serial port. In fact, there isn't a single computer in the office with a serial port. I've seen USB-to-DB9 adapters, but I need to go from USB to RJ45 (serial). How would I go about accomplishing this? Do I need two adapters? Will USB-to-DB9 and then DB9-to-RJ45 work? Thanks in advance.

  Read the article

• USB keyboard not working under Windows 7 x64?

  - by Comboo

  I have two USB keyboards, one no-name cheap thing and an old Logitech. When I plug them in to my computer they pop up in Device Manager as an "Unknown device" and "USB-receiver", respectively. Both of them fail to install any drivers, neither automatically or through Windows Update. Both keyboards work perfectly on another computer I have with Windows Vista 32-bit. Can this be one of those cases where a device does not work in a 64-bit version of Windows? I doubt it though since I've never had that problem before with any device and I thought that basic things like keyboards would be kind of failsafe. I don't really know how to start debugging this issue. I've tried all the obvious, rebooting, changing the USB port, etc. Are there any generic x64 keyboard drivers you can use? Is there any way to find the manufacturer of the keyboard over USB? There is nothing written on it.

  Read the article

• XP VM not detecting USB keyboard or mouse from Windows 7 host

  - by Ian Kemp

  I've been using a Windows XP Pro VM (32-bit, SP3) for months on my work PC (Windows 7 64-bit) with no problems, with a PS/2 keyboard and a standard optical USB mouse. Today I copied this VM onto my home PC, which is also Windows 7 64-bit but with a G15 USB keyboard and MX518 USB mouse. For some reason the VM does not accept input from the keyboard or mouse, which makes it almost impossible to use. (Unity works but is not an option). Both my home and work PC are running VMware player 3.1.0. My keyboard and mouse show up as USB devices in the bottom-right of the VMware Player window, and if I click them I have the standard option to "Connect (Disconnect from host)". I have selected this option for the keyboard, and then the VM happily accepts keyboard input, but of course my host PC no longer does. It seems like VMware is seeing my keyboard and mouse as USB devices and not input devices. I've tried sending the keyboard input to the guest and reinstalling VMware Tools, but that achieved nothing. I'm certain it's a problem with the VM, and not the XP install, as I also can't use F12 to enter the VMware BIOS when the VM is powering up.

  Read the article

• How do I get a USB hard-disk adaper to work with a PCMCIA USB card?

  - by Carl

  I have a PCMCIA (Cardbus) 32bit USB 2.0 2-port card. If I plug my MP3 player in it works fine. I have a USB adapter for a hard disk drive. When I plug that into the PCMCIA USB slot the light on that hard disk flashed between red and green - it should stay green. "USB Mass Storage device" is added in the Device Manager, but no drive letter appears in My Computer. The installing device icon down by the clock never goes away. (Windows XP SP3.)

  Read the article

• Creating rescue / install USB flash disk for CentOS

  - by wwwpanda

  For CentOS installation CDs, you can install OS, as well as booting into "rescue" mode so that you can do a chroot mount on the system partition for problem solving, even the system is installed in hardware RAID drives. How can we create a similar thing but on usb flash drive? I tried to do it with unetbootin, but when booting into the USB, eventually the CentOS setup still requires presence of CDs. Ultimately, I want to use this usb flash drive for remote disaster recovery through say HP iLo remote console / Dell iDrac etc.

  Read the article

• Arch Linux doesn't mount two USB drive?

  - by unixbhaskar

  One is USB modem which is connected and working and problematic one is a plain vfat USB stick which contain data ....that is the fellow not mounting :( I have tried to see it by fdisk ....it doesn't mount autometically... Is there any UDEV rule for that?? Because I have put a udev rule to remove the usb-storage thing( I had to.. otherwise the usb modem wont get connected... it waits for storage to relase the port) Any idea and solution would be greatly appreciated PS: I am running Arch distribution. Thanks

  Read the article

• USB Drive cannot detect in Windows 7

  - by Perdana Putra

  Have you ever plugged in a USB drive or any external device with a hard drive and wondered why you cannot see it in My Computer? I often have, I believe my USB is not broke .. because if I plugin the USB to another computer could be seen / detected. I tried following this tutorial http://www.howtogeek.com/howto/22251/find-your-missing-usb-drive-in-windows-7-vista/ but I am afraid of going wrong, and caused my data is lost. is there any easy way around this problem? many thank's for your attentions Guys ..

  Read the article

• Network connection via USB

  - by Fco

  Can I get my Nexus One/Android on my local network over USB instead of WiFi and browse to my computer's IP address, the one to which the phone would be connected to, via USB? For instance, let's say my computer has an IP address 100.1.1.1 and when I go to it from the computer I would go to my localhost and see a website I've set up locally in the computer. Then, I connect my phone to that computer via USB. Can I then go to 100.1.1.1 from the browser and see the same website? All this through the USB, no WiFi?

  Read the article

• SafeStick Provides Secure USB Drive Alternative

  Having dodged a widespread backdoor that shut down the protection provided by a number of secure USB drives, SafeStick is establishing itself as an alternative for enterprise security.

  Read the article

• SafeStick Provides Secure USB Drive Alternative

  Having dodged a widespread backdoor that shut down the protection provided by a number of secure USB drives, SafeStick is establishing itself as an alternative for enterprise security.

  Read the article

• While installing Ubuntu from Ubuntu Desktop (from USB)

  - by Andres

  I downloaded the Ubuntu Software to create a USB to install Ubuntu. I rebooted my PC (Windows 7), in wich i did a partition (:E) just for Ubuntu. But when i start the installer, it says there's no other OS in my computer, and doesn't give me the option to install it in :E, just the option to format the WHOLE hard drive and install it there. What can i do? Also, i tried Wubi before, but it had an error with "wubildr.mbr"

  Read the article

• Ubuntu 11.10 doesn't detect external usb hard drive

  - by Andrew

  I have been batting with this issue for a bit and cannot find the answer to it. So the Dmesg see's the device, being Symwave WDC WD64.... media@Media-pc:~$ dmesg | tail -n 20 [78678.719497] scsi 10:0:0:0: Direct-Access Generic- USB3.0 CRW -0 1.00 PQ: 0 ANSI: 0 CCS [78678.725621] scsi 10:0:0:1: Direct-Access Generic- USB3.0 CRW -1 1.00 PQ: 0 ANSI: 0 CCS [78684.073837] scsi 11:0:0:0: Direct-Access SYMWAVE WDC WD6400AAKS-0 3B01 PQ: 0 ANSI: 4 [78691.008126] scsi 11:0:0:0: uas_eh_abort_handler tag 0 [78691.008139] scsi 11:0:0:0: uas_eh_device_reset_handler tag 0 [78691.008147] scsi 11:0:0:0: uas_eh_target_reset_handler tag 0 [78691.008154] scsi 11:0:0:0: uas_eh_bus_reset_handler tag 0 [78691.080307] usb 2-2.4: reset high speed USB device number 9 using ehci_hcd [78691.221427] scsi 11:0:0:0: Device offlined - not ready after error recovery [78691.221498] scsi 11:0:0:0: rejecting I/O to offline device [78691.221519] scsi 11:0:0:0: rejecting I/O to offline device [78691.222952] scsi 11:0:0:1: Enclosure SYMWAVE SES 3B01 PQ: 0 ANSI: 4 [78691.223156] scsi 11:0:0:2: uas_sense_old: urb length 26 disagrees with IU sense data length 510, using 18 bytes of sense data [78691.225061] sd 11:0:0:0: Attached scsi generic sg3 type 0 [78691.225344] ses 11:0:0:1: Attached Enclosure device [78691.225495] ses 11:0:0:1: Attached scsi generic sg4 type 13 [78691.226266] sd 10:0:0:0: Attached scsi generic sg5 type 0 [78691.226653] sd 10:0:0:1: Attached scsi generic sg6 type 0 [78691.241647] sd 10:0:0:0: [sdd] Attached SCSI removable disk [78691.243832] sd 10:0:0:1: [sde] Attached SCSI removable disk It looks like it attaches sdd and sde. Now when i look in the disk utility it shows "Hard disk Symwave WD6400AAKS-0 device /dev/sdc doesn't show any other info then that, if i format, it says that it cannot open /dev/sdc no device or address error. Underneeth the device it does show two general usb3.0 CRW that are sdd and sde. Now if I do a fdisk -l it doesn't show the device: media@Media-pc:~$ sudo fdisk -l Disk /dev/sda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000247de Device Boot Start End Blocks Id System /dev/sda1 * 2048 152176639 76087296 83 Linux /dev/sda2 152178686 156301311 2061313 5 Extended /dev/sda5 152178688 156301311 2061312 82 Linux swap / Solaris Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x948fc822 Device Boot Start End Blocks Id System /dev/sdb1 63 1953520064 976760001 7 HPFS/NTFS/exFAT So now I am confused. Any ideas how I get fdisk to see the device?

  Read the article

< Previous Page | 62 63 64 65 66 67 68 69 70 71 72 73  | Next Page >