Search Results

Search found 2370 results on 95 pages for 'av cable'.

Page 7/95 | < Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >

• What cable would be used for a touch screen

  - by George Bailey

  I was told that any monitor could be turned into a touch screen if you have the right software. This has got to be old news, or even a myth. Please shed some light on this if you can. Am I wrong? My primary question is which cable would normally be used to hook up a touch screen. Would you need 2 cables for this (one for the monitor, one to receive touch events?), or is a single cable going to have data in both directions (perhaps an HDMI?)

  Read the article

• Samsung S23A750D 23" 120Hz get no signal

  - by John Carter

  I have a few days ago received this monitor. Samsung S23A750D 23" 120Hz I am using it with a Gainward Nvidia GTX570 Phantom GPU via DisplayPort cabling. The trouble I am having is that the monitor has great trouble picking up a signal from the GPU when the computer has gone into sleep mode or been switched off (at this point I can get a signal to the monitor). It's only when I turn the computer back on and then the monitor that I get no signal. To get a signal I have to remove the power cable and put back in or sometimes remove the DP cable and put back in. I have tried not turning the monitor off (the monitor goes into a sleep mode when the computer goes into sleep mode) but on putting the computer on it does not pick up a signal. It is only by removing the power cable and/or DisplayPort cable will I get a signal. And this is intermittent. I have tried upgrading the firmware from Samsung but this hasn't helped. Any ideas?

  Read the article

• Running computer from separate room

  - by Dan

  I want my computer to be in the basement, but to use it on the first floor. Which cables should I run through the floor? Can some be wireless or other methods? Here are some of the options I've thought of: Basic: Run DVI, usb (mouse), usb (keyboard), and audio cable (4 cables) USB Hub option: Run DVI, and 1 usb, then using a usb hub split it into mouse, keyboard, maybe even audio (2-3 cables) HDMI Option: If I get a new video card and monitor that supports HDMI, would I be able to run both audio and video through it? Would the monitor have to have an audio out? Also there is a lot of extra bandwidth in the HDMI cables, could I send two monitors on 1 cable or would I have to use 2 cables? How about sending mouse/keyboard through the HDMI cable? I see a lot of monitors with USB hubs built in, but I assume I'd still have to wire HDMI + 1 USB cable to use the USB hubs? X Terminal Machine/Thin Client: I don't really know much about this option. Not sure if it would allow me to run graphics acceleration and watch movies, does anyone know more details about what this would allow me to do? Other options: Any other ways to do this? Can any of this be wireless?

  Read the article

• What am I doing wrong with this cat 6 patch panel wiring?

  - by Max Hodges

  top number is transmitter bottom number is remote terminator 12345678 36145278 is this because I could be mixing T568A and T568B wiring? how do I know if my patch cord is A or B? Do I just look at the plug and match it up with the diagram on the back of the panel somehow? EDIT I read that 36145278 indicates a cross over cable, but I'm not trying to make a cross over. Where did I go wrong? I'm guessing the cable plug is T568A but I wired it to the panel using T568B. So I need to redo it as T568A. But in the future how do I know if I cable is A or B? Cheers!

  Read the article

• ethernet not working

  - by good boy

  i wanted to know how do i setup an ethernet connection on a laptop,my isp gave me a telephone like cable which fits the ethernet port. i guess its the ethernet cable. when i connect it, nothing happens on the pc the ethernet card(realtek pcie gbe family controller) says cable not plugged in. i am using wired connection for first time.the system is completely stable with softwares .the drivers are also automatically updated through a manufacturer installed update system. the isp says there must be some sort of light on the port. whats the problem? how do get it working.

  Read the article

• Difficulty racking HP ProLiant Gen8 servers

  - by Systemspoet

  We're an all Proliant shop with around 50 servers, mostly DL360s and DL380, from G5's through G7's. We just got our first two G8's in and went to rack them. We were stunned to find out that the new cable management arms protrude almost 1 inch deeper into the rack then previous iterations of the Proliant line. Unfortunately that causes them to occupy the same space as the PDU's in our APC racks. In a non-densely populated section of rack that's no biggie, but in a densely populated section it's impossible to get the cable arm into place without dislodging another machine's power. Has anyone else run into this? Obviously racking machines without cable management arms is not an option. I supposed we could reconfigure our racks but that's a nightmare.

  Read the article

• Difficulty racking Proliant G8's

  - by Systemspoet

  We're an all Proliant shop with around 50 servers, mostly DL360s and DL380, from G5's through G7's. We just got our first two G8's in and went to rack them. We were stunned to find out that the new cable management arms protrude almost 1 inch deeper into the rack then previous iterations of the Proliant line. Unfortunately that causes them to occupy the same space as the PDU's in our APC racks. In a non-densely populated section of rack that's no biggie, but in a densely populated section it's impossible to get the cable arm into place without dislodging another machine's power. Has anyone else run into this? Obviously racking machines without cable management arms is not an option. I supposed we could reconfigure our racks but that's a nightmare.

  Read the article

• Ubuntu/Nvidia lists DVI dual cable as single

  - by Joseph Mastey

  I have an NVidia Quadro FX 880M graphics card, from which I am trying to drive 2 monitors: my internal laptop montior (15.6", 1920x1080, Nvidia driver says it's running via DisplayPort) and an external 27" monitor (Dell U2711, 2560x1440 native resolution, via DVI). I've hooked the dual DVI cable to the dual DVI port on my dock (Dell PR03X) and installed the proprietary NVidia driver, but I cannot seem to get the full 2560x1440 out of the larger 27" external monitor. Looking at the NVidia driver settings, the monitor's connection is reported as a single DVI cable, rather than a dual one, which would explain the reduced resolution. Does anyone have any experience with an issue like this? What can I do to make full use of my new monitor? (Possibly) Relevant Information: There is no DVI port on the laptop itself, but one is provided via the dock. The laptop and dock both provide a DisplayPort jack, but I have been unable to get this working on either w/ the monitor. I did have the nouveau driver installed when I installed the nvidia proprietary driver, but have since removed it (no change in the monitor situation when I removed it). The 27" reports a max resolution of 1680x1050. Thanks, Joe

  Read the article

• Does water damage a fiber optic / cat5 cable

  - by chris

  One of the buildings I support recently had an adventure with a broken fire sprinkler. Lots of water everywhere. One of the "drains" the water used was the vertical risers between network closets. The cable plant in this building has bundles of cat5e as well as conduit with bundles of multimode fiber optic cables. The fiber is standard multi strand plenum rated stuff that terminates in boxes that have the patches to the switches. As far as I can tell, no water got near the ends of the cables (fiber or copper) but the conduit was saturated, and is likely still saturated because there isn't any air flow to dry the cables out. My gut reaction is that while it didn't do the cables any favors, it likely also isn't going to cause any problems. A little more reading / googling around leads me to believe that the water may cause problems down the road. Some pretty pictures so everyone knows what I'm talking about: Fiber conduit: Vertical riser, going down: Vertical riser, going up: Does anyone have any experience with this sort of damage and how to deal with it? Should we just ask the insurance adjuster to add "pull new structured cable" to the list of things to be replaced? And, if the opinion is "replace it because it'll start failing randomly over time" please include links that describe the specific failure modes, so I've got some ammo to use with the adjuster.

  Read the article

• Some Power Supply Cable Questions?

  - by jasondavis

  I am building a new PC and I haven't done this in a few years. It will have all the latest tech stuff. I got my PSU in the mail and I am looking over the cables (it has a lot) I thought it was a mudular PSU so I could only use the cables I need but instead it is a hybrid (some wires attached and some can be added/removed instead of all of then being removable). 1) So I am curious, I believe all my hard drives and optical drives are powered off of a sata power cable so does that mean I probably do not need any of the 4 pin molex cables? Or are these used for other things? 2) I know the 24-pin cable goes to my motherboard. 3) I have some 6-pin cables that are labeled pci-e which is new to me. I read these are for some grapghic cards and stuff. I have 2 grapghic cards but they do not require a seperate pci-e power wire be hooked to them. So are these pci-e wires just to power pci-express cards? Or for other things as well? 4) I have a 4pin ATX 12v wire, what is this for? 5) 8 pin EPS, what is this for?

  Read the article

• iPod Shuffle (3G) - USB adapter cables

  - by bencnscp

  The iPod shuffle (3G) seems to have a proprietary connector that is different than the previous one for iPod shuffle (2G). I have tried the cable that comes with the 2G, and even a 3rd party charger, and their connectors are physically keyed so you cannot plug them in. Is anyone using a 3rd-party cable (besides the one Apple provided)?

  Read the article

• USB-to-Parallel adapter rated as USB 1.1 - will its driver lower speed of USB 2.0 bus?

  - by cumminjm

  I need to connect a printer with a parallel port to a computer with only a USB 2.0 bus. I'd like to do so without lowering the USB 2.0 bus speed to USB 1.1. All the USB-to-Parallel adapter cable found so far seem to be rated as USB 1.1 and they come with a CD which presumably contains a necessary driver. I haven't purchased one and tested it out yet, but if so, would the cable's driver lower speed of USB 2.0 bus?

  Read the article

• Laptop Hard Drive Cable

  - by Josh Pennington

  I am about to have to dig into my wifes laptop to pull the hard drive out to pull the data off since the rest of it is close to dieing. I am curious what I should expect to have to deal with to get data off the hard drive. I am assuming its a SATA drive. Do I need a special cable to connect a laptop SATA hard drive to the computer or should I be able to connect it to my desktop computer without issue? Thanks Josh Pennington

  Read the article

• Splitting coax cable for PC tuner

  - by TheLakersHighlights

  I have an HDTV connected with HDMI from a DISH Network VIP612 DVR Receiver. I want to split the coaxial connection from the DVR to my Hauppauge 1200 WinTV HVR-850 HDTV Tuner Stick. What splitter and coaxial cable (needs to transmit audio and video) should I get to make this a watchable TV on my computer?

  Read the article

• Connect Graphic Card SPDIF input cable to Motherboard

  - by sebtm

  How do I connect the graphic card SPDIF-in cable (2 pin blue and black) to motheboard connector SPDIF-out (3 pin red,white,black).

  Read the article

• Wireless disabled after connecting ethernet cable

  - by user1716672

  Im using Linux Mint 13. Wireless has always worked fine but stopped yesterday after I connected to the internet via an ethernet cable. I ran: sudo rfkill list gives me: 0: phy0: Wireless LAN Soft blocked: yes Hard blocked: no sudo rfkill unblock 0 sudo rfkill list gives me 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no sudo service networking start results in: networking stop/waiting The contents of /etc/network/interfaces is auto lo iface lo inet loopback Any ideas what I can do?

  Read the article

• Sending ASCII characters on Mac USB/RS232 cable

  - by Olivier

  Hello, I have a RS232C/USB cable to connect an electronic device to my iMac Intel (MacOSX SnowLeo 10.6.3). Is there a utility program that allows for sending ASCII characters on the USB port that the RS232C device will understand? If possible, I'd rather avoid programming. I'd prefer an Automator script or a simple program with a GUI. Thanks

  Read the article

• hybrid cable for QSFP to CX4 convertion

  - by John-ZFS

  here is a hybrid cable for QSFP to CX4. Will this fit SFP+ ports? Deeply confused by standards and struck in a situation with wrong hardware selection!Personally have not seen the ports/hardware and hence the obviously stupid question! thanks for stopping by and bearing with me. http://www.cablesondemand.com/pcategory/72/category/QSFP+-+CX4/URvars/Catalog/Library/InfoManage/QSFP_TO_CX4_COPPER_CABLES.htm

  Read the article

• Network via FireWire cable

  - by JIa3ep

  My notebook works under Windows XP and desktop computer under Vista. Seems to be that Windows Vista has no native support for creating network via FireWire cable. Is there 3rd-party solution?

  Read the article

• Can I use DVI to RCA Cable to connect my PC to my TV

  - by POTHEN

  HI I wanna clear my doubt wether the above query(title) can be done MY Graphic card supports DVI I and a VGA and I wanna Connect it to my 29' Sony FD Trinitron Wega KV EF 29 M80 Using DVI to RCA cable. To which Port do i connect for the TV.

  Read the article

• Ask The Readers: How Do You Camouflage Your Tech?

  - by Jason Fitzpatrick

  We love having a technology-packed house as much as the next geek, but not all our gizmos, gadgets, and peripherals are exactly Home and Garden approved. How do you enjoy all your tech without your living room and office looking like an electronics store? Image courtesy of Weekly Geek’s DIY charging station tutorial. Whether it’s to hide the insanely intense LEDS, minimize the visual clutter, or to boost the wife/husband acceptance factor of your geeky hobbies higher, there’s a variety of reasons for wrangling cables, hiding routers, or otherwise camouflaging your gear. This week we want to hear all about your tips for hiding or otherwise minimizing the appearance of gear around your home, office, and other personal spaces. Sound off in the comments with your best tips, trick, and camouflaging techniques; check back in on Friday for the What You Said roundup. HTG Explains: How Windows 8′s Secure Boot Feature Works & What It Means for Linux Hack Your Kindle for Easy Font Customization HTG Explains: What Is RSS and How Can I Benefit From Using It?

  Read the article

• LG W3000H-BN monitor cannot go above 1280x800

  - by Jo Profit

  I noticed that there are many people complaining about this issue with the W3000H but I have yet to find a solution that works for me. I am using Windows 7 Professional and and using a nVidia Quadro NVS 240 video card with a 4 monitor splitter cable. The cable from the monitor and the splitter are rated DVI-D Dual Link and the video card itself is rated for 2560x1600. I have installed the latest drivers for the video card and just grabbed the .inf, icm and cat file from the LG website and manually installed the monitor drivers. Does anyone have problems with the same setup? I have 3 other monitors (2 at 1920x1080 and 1 at 1280x1024). I really would like to be able to display the full resolution or else the large screen is useless. (I triple checked that the monitor itself supports this resolution). So monitor, cable, splitter and card supposedly support 2560x1600. Drivers are up to date but I cannot select that resolution when in the "Screen Resolution" menu, nor through the nVidia control panel. Please save me from madness :)

  Read the article

• Home network with two isolated separate subnets, running on cablemodem/router and WRT-router.

  - by Johan Allgoth

  I have a new connection with a nice new router/cable-modem. I'd like to setup it up optimally and needs some pointers. I am a complete n00b when it comes to routing. I want to end up with two separate subnets, 10.1.2.0/24 and 192.168.1.0/24 each available on their own wireless channel/SSID. Both firewalled. I want my wired computers on the gigabit switch, optimally with public ips. I want to be able to reach 192.168.1.0/24 from 10.1.2.0/24, but not vice versa. Everyone should have internet access. Hardware and capabilities: Netgear CG3100. Handles cable connection. Gigabit switch. 802.11n. Can do DHCP, firewall, NAT etc. Can choose subnet. Can turn of NAT and if so hand out up to 4 public ips. Somewhat challenged when it comes to configuration. WRT-router. Runs DD/Open-WRT very stable. 100 Mbit switch. 802.11.g Can do DHCP, firewall, NAT etc. Can choose subnet. Highly configurable. I hope to be able to keep 10.1.2.0/24 on the CG3100, for speed reasons and 192.168.0.0/24 on the WRT-router for quota and user control reasons. On my 10.1.2.0/24 network I plan on running servers for various services. Should I turn of NAT on the WRT-router? Or on the cable modem? Activate what in that case? Is double NAT always f-ed up?

  Read the article

• Why is my router not routing?

  - by dwj

  Starting a week and half ago my router stopped working with my cable modem. I went to sleep with it working and woke up with it not. I swapped in another router and am still having issues; I was gone for 10 days so now I'm back to trying to figure it out. While I was gone I left everything (cable modem, router, and computer) powered off. My setup: Comcast Ambit cable modem (from Comcast) Netgear WGR614 v4 router -- replaced with Linksys WRT54GS v1.1 Windows XP SP3 other computers, all currently unplugged The modem is using the firmware (ver 2.105.2001) provided by Comcast; hardware version 1.3 The Linksys router is using FW ver 4.71.4 (latest for this release of HW), factory defaults I am only using the wired connections; no wireless. I have swapped out all of the cat5 cable. If I plug my computer directly into the cable modem, I can ping by name or number. Everything works perfectly. If I plug my computer into the router and the router into the modem, I cannot access anything outside of my local network. This is the exact setup I've used for the past 5 years; there were no changes in the past year. Now here's the interesting part: I can log into the Linksys router and get status information from it; everything appears good. Using the Diagnostics, I can run ping and traceroute to any site on the internet. These work perfectly. From my computer, I can ping the router and the modem. However, I cannot ping anything on the internet by with name or number. If I plug in another computer, I can ping it successfully. I've included two transcripts below that show these two attempts. Addresses, DNS, gateways, etc. look good. I cannot access the internet through either router. I am at a loss here. Suggestions? Help! Computer to Router to Cable Modem C:\ipconfig /renew Windows IP Configuration No operation can be performed on Bluetooth Network while it has its media disconnected. Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : hsd1.ca.comcast.net. IP Address. . . . . . . . . . . . : 192.168.1.100 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 Ethernet adapter Bluetooth Network: Media State . . . . . . . . . . . : Media disconnected C:\ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : wynton Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : hsd1.ca.comcast.net. Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : hsd1.ca.comcast.net. Description . . . . . . . . . . . : Intel(R) 82562V-2 10/100 Network Connection Physical Address. . . . . . . . . : 00-1D-09-9B-45-EB Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.1.100 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 68.87.76.178 68.87.78.130 Lease Obtained. . . . . . . . . . : Monday, March 22, 2010 10:21:55 PM Lease Expires . . . . . . . . . . : Tuesday, March 23, 2010 10:21:55 PM Ethernet adapter Bluetooth Network: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Bluetooth LAN Access Server Driver Physical Address. . . . . . . . . : 00-0A-3A-6F-68-41 C:\ping google.com Ping request could not find host google.com. Please check the name and try again . C:\ping 74.125.19.104 Pinging 74.125.19.104 with 32 bytes of data: Request timed out. Request timed out. Request timed out. Request timed out. Ping statistics for 74.125.19.104: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), C:\ Computer to Cable Modem Directly C:\ipconfig /renew Windows IP Configuration No operation can be performed on Bluetooth Network while it has its media disconnected. Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : hsd1.ca.comcast.net. IP Address. . . . . . . . . . . . : 71.204.149.195 Subnet Mask . . . . . . . . . . . : 255.255.252.0 Default Gateway . . . . . . . . . : 71.204.148.1 Ethernet adapter Bluetooth Network: Media State . . . . . . . . . . . : Media disconnected C:\ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : wynton Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : hsd1.ca.comcast.net. Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : hsd1.ca.comcast.net. Description . . . . . . . . . . . : Intel(R) 82562V-2 10/100 Network Connection Physical Address. . . . . . . . . : 00-1D-09-9B-45-EB Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 71.204.149.195 Subnet Mask . . . . . . . . . . . : 255.255.252.0 Default Gateway . . . . . . . . . : 71.204.148.1 DHCP Server . . . . . . . . . . . : 68.87.76.10 DNS Servers . . . . . . . . . . . : 68.87.76.178 68.87.78.130 Lease Obtained. . . . . . . . . . : Monday, March 22, 2010 10:18:50 PM Lease Expires . . . . . . . . . . : Monday, March 22, 2010 11:12:31 PM Ethernet adapter Bluetooth Network: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Bluetooth LAN Access Server Driver Physical Address. . . . . . . . . : 00-0A-3A-6F-68-41 C:\ping google.com Pinging google.com [74.125.19.99] with 32 bytes of data: Reply from 74.125.19.99: bytes=32 time=20ms TTL=55 Reply from 74.125.19.99: bytes=32 time=17ms TTL=55 Reply from 74.125.19.99: bytes=32 time=28ms TTL=55 Reply from 74.125.19.99: bytes=32 time=18ms TTL=55 Ping statistics for 74.125.19.99: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 17ms, Maximum = 28ms, Average = 20ms C:\ping 74.125.19.104 Pinging 74.125.19.104 with 32 bytes of data: Reply from 74.125.19.104: bytes=32 time=18ms TTL=55 Reply from 74.125.19.104: bytes=32 time=18ms TTL=55 Reply from 74.125.19.104: bytes=32 time=17ms TTL=55 Reply from 74.125.19.104: bytes=32 time=16ms TTL=55 Ping statistics for 74.125.19.104: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 16ms, Maximum = 18ms, Average = 17ms C:\

  Read the article

• Serial connection over a single USB cable (Windows to linux, or linux to linux)

  - by andyortlieb

  I'm helping out with a project for an embedded device that only has USB and no serial. This device is running Linux. These days, when we need to connect to a serial port on a device we typically use a USB to serial adapter (on something like a phone system or a load balancing device, etc). I would like to know if it is possible to have the host device behave as though it were a serial adapter, thus removing the need for one. Given the nature of USB, is this approach even necessary? To recap, I would like to be able to connect a single A-to-A USB cable from my workstation (be it windows or linux) to this device, for the purpose of administration (especially initial setup), using minicom, putty or hyperterminal. Thanks

  Read the article

< Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >