Search Results

Search found 2385 results on 96 pages for 'credit cards'.

Page 7/96 | < Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >

  • Routing using Linux with 2 NIC cards

    - by Kevin Parker
    Configured Clear OS to be in Gateway mode on a machine with two NIC cards. eth0:192.168.2.0/24 with ip 192.168.2.27 which is connected to a modem and thus have internet connectivity. eth1:192.168.122.0/24 with ip 192.168.122.10 which is connected to other machines in LAN through switch. LAN machines with network 192.168.122.0 is not getting internet.How can they get internet Through Clear OS gateway.I have enabled packet forwarding in clear os using "ip_forward=1" What am i missing?.Can you please help me in this. Following are the static routing i have added: on LAN machine1 with ip address 192.168.122.11 ip route add 192.168.2.0/24 via 192.168.122.10 dev eth0 ip route show 192.168.2.0/24 via 192.168.122.10 dev eth0 192.168.122.0/24 dev eth0 proto kernel scope link src 192.168.122.11 But still 192.168.2.0/24 network is not reachable.Where can be the problem??

    Read the article

  • Multiple Graphics Cards on Fedora 15 (Gnome 3)

    - by Michael
    I have the (delightful) misfortune of having 3 graphics cards. They are XFX Radeon 5750s. Each drives 2 monitors via dvi. I am having a really hard time getting these running on fedora 15 (gnome 3). So my setup is 3 columns of 2 monitors (the upper monitor is mounted upside down in each column to reduce the bezel between monitors). When the (graphical) login screen comes up all 6 have the blue stripey background that must be the default, but then when I login, things get interesting. In the xorg.conf below, you will see only 2 of the screens in the serverlayout while the other 4 are commented out. Logging in with only 2 of the screens active works well (and it even remembers that the top one is upside down, and should be considered above the lower, i am not sure where it stores this info, but i set it using the graphical "Displays" settings) However, as soon as I uncomment a third screen, or more, it gives me an error message when I login. It's one of those friendly, less helpful messages (Oh no! Something has gone wrong. A problem has occurred and the system can't recover. Please log out and try again). If i do not use an xorg.conf, then the "Displays" prefs pane shows only the two monitors on one of my graphics cards Thanks to anyone who can help me get going! (xorg.conf and then lspci below, and xorg log) xorg.conf Section "ServerLayout" Identifier "X.org Configured" Screen "Screen0" 0 0 Screen "Screen1" Below "Screen0" # Screen "Screen2" RightOf "Screen0" # Screen "Screen3" RightOf "Screen1" # Screen "Screen4" RightOf "Screen3" # Screen "Screen5" RightOf "Screen4" InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" ModulePath "/usr/lib/xorg/modules" FontPath "catalogue:/etc/X11/fontpath.d" FontPath "built-ins" EndSection Section "Module" Load "record" Load "dri" Load "dbe" Load "extmod" Load "dri2" Load "glx" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor2" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor3" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor4" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor5" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Device" Identifier "Card0" Driver "radeon" BusID "PCI:4:0:0" EndSection Section "Device" Identifier "Card1" Driver "radeon" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "Card2" Driver "radeon" BusID "PCI:6:0:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Card0" Monitor "Monitor1" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Card1" Monitor "Monitor2" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen3" Device "Card1" Monitor "Monitor3" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen4" Device "Card2" Monitor "Monitor4" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen5" Device "Card2" Monitor "Monitor5" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection lspci output follows [tgm@tgm ~]$ lspci 00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13) 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) 00:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 (rev 13) 00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13) 00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) 00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) 00:14.3 PIC: Intel Corporation 5520/5500/X58 I/O Hub Throttle Registers (rev 13) 00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 00:1c.2 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 3 00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller 00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 02:00.0 PCI bridge: nVidia Corporation NF200 PCIe 2.0 switch for mainboards (rev a3) 03:00.0 PCI bridge: nVidia Corporation NF200 PCIe 2.0 switch for mainboards (rev a3) 03:02.0 PCI bridge: nVidia Corporation NF200 PCIe 2.0 switch for mainboards (rev a3) 04:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5750 Series] 04:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 05:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5750 Series] 05:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 06:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5750 Series] 06:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) 08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) xorg log (posted to fpaste due to how long it is. thanks to marcusw for the request) http://www.fpaste.org/r5ww/ xorg log with all 6 monitors enabled in xorg.conf (they all turn on and have blue, but then one gets the aforementioned user-friendly error message). http://www.fpaste.org/X63H/

    Read the article

  • Multiple network cards, controlling where my traffic goes

    - by thefinn93
    This is an Ubuntu 12.04 server install. I have multiple network cards, eth0 and eth1 lets call them. eth0 is connected to the internet, and all of my traffic goes through it, until eth1 gets plugged in. Then the machine tries to send everything through eth1, which for various and sundry reasons does not go out to the Interent. The only traffic it doesn't send through eth1 is traffic on eth0's subnet. It also will not accept inbound connections on eth0 from outside of eth0's subnet. I'd like all outbound traffic to go out eth0, but I'd like incoming connections from to either card from any subnet to work.

    Read the article

  • Dual 9500GT video cards, one works

    - by bossDub
    I have two video cards, both are PCIe 512MB Nvidia 9500GTs. One is an Evga and the other is another brand. If I put them both in, the one in the top slot will work (either card). The one in the lower slot says Code 12, not enough resources to use this device. I've tried disabling Firewire and a few other things in an attempt to get more "resources". Intel DP45SG motherboard. 4G Ram. 64bit Vista. Q8200 CPU. I do not have the SLI connector.

    Read the article

  • credit or minclass does not work well with pam_cracklib.so in common-password (opeSuSe 11.3)

    - by Mario
    I'm trying to implement password complexities on my pdc. It's a samba PDC with openLDAP backend. I tried cracklib-check but it looks like that I should have a decent and localize version of password library since the library out there usually comes in english. I also have another consideration that we will allow users to use any kind of password - even though it's dictionary based - as long as their passwords integrated with low/upper alphabet, digits, and other characters such as '$' or '_' (pam_cracklib.so calls them as classes). So here is my /etc/pam.d/common-password: #password requisite pam_pwcheck.so nullok cracklib password requisite pam_cracklib.so minclass=4 reject_username ##password requisite pam_cracklib.so \ ## dcredit=-1 ucredit=-1 lcredit=-1 ocredit=-1 reject_username password optional pam_gnome_keyring.so use_autht_ok password required pam_unix2.so use_authtok nullok The first commented line (with #) was the default configuration of openSuse 11.3. The 2nd/3rd (with leading ##) is another configuration I use when minclass=4 line is commented out. By the way, I have 'check password script' = /usr/local/sbin/crackcheck -d /usr/share/cracklib/pw_dict and passdb backend = ldapsam:ldap://127.0.0.1 parameters in smb.conf and cracklib-check works fine too. So here is the test I conduct. I logon to windows and then change my password. Sometimes it works fine that it trows error message - which what I wanted, but simple password with only lower alphabets can pass windows change password. Maybe I should make a new library which incorporates local vocabularies, but a guy out there (raise your hand please if you read this :) ) also experienced the same trouble with english word. Besides, what we really want is to let user to choose 2 or 3 format password out of 4 classes. Is there a bug or something with pam module in openSuse 11.3? Thank you in advance. Regards, Mario

    Read the article

  • Credit Card storage solution

    - by jtnire
    Hi Everyone, I'm developing a solution that is designed to store membership details, as well as credit card details. I'm trying to comply with PCI DSS as much as I can. Here is my design so far: PAN = Primary account number == long number on credit card Server A is a remote server. It stores all membership details (Names, Address etc..) and provides indivudal Key A's for each PAN stored Server B is a local server, and actually holds the encrypted PANs, as well as Key B, and does the decryption. To get a PAN, the client has to authenticate with BOTH servers, ask Server A for the respective Key A, then give Key A to server B, which will return the PAN to the client (provided authentication was sucessful). Server A will only ever encrypt Key A with Server B's public Key, as it will have it beforehand. Server B will probably have to send a salt first though, however I doin't think that has to be encrypted I havn't really thought about any implementation (i.e. coding) specifics yet regarding the above, however the solution is using Java's Cajo framework (wrapper for RMI) so that is how the servers will communicate with each other (Currently, membership details are transfered in this way). The reason why I want Server B to do the decryption, and not the client, is that I am afraid of decryption keys going into the client's RAM, even though it's probably just as bad on the server... Can anyone see anything wrong with the above design? It doesn't matter if the above has to be changed. Thanks jtnire

    Read the article

  • Dual NVidia graphics cards in Ubuntu / xorg.conf mania

    - by John Zwinck
    I have two NVidia graphics cards: Quadro NVS 295 (PCI Express, dual DisplayPort outputs) GeForce FX 5200 (PCI, DVI and VGA outputs) I have three identical monitors, two on DisplayPort and one on DVI. I'm on Ubuntu Hardy (and cannot currently dist-upgrade for separate reasons). I use the "nvidia" driver. What's new is the GeForce card and the third monitor. I currently have the dual DisplayPort monitors working fine. Here are the display-related parts of my xorg.conf: Section "ServerLayout" Identifier "Default Layout" Screen "PCI-Express Screen" 0 0 # adding this makes X fail to start: Screen "PCI Screen" 0 Inputdevice "Generic Keyboard" Inputdevice "Configured Mouse" EndSection Section "Module" Load "glx" # not sure why/if this is needed EndSection Section "Monitor" Identifier "DELL 2408WFP" Option "DPMS" EndSection Section "Device" Identifier "NVIDIA Quadro NVS 295" Driver "nvidia" Option "RenderAccel" "true" Screen 0 BusID "PCI:2:0:0" EndSection Section "Device" Identifier "NVIDIA GeForce FX 5200" Driver "nvidia" Option "RenderAccel" "true" Screen 1 BusID "PCI:6:4:0" EndSection Section "Screen" Identifier "PCI-Express Screen" Device "NVIDIA Quadro NVS 295" Monitor "DELL 2408WFP" Defaultdepth 24 Option "TwinView" "True" Option "UseEdidFreqs" "True" Option "MetaModes" "1920x1200 +0+1200, 1920x1200 +0+0" EndSection Section "Screen" Identifier "PCI Screen" Device "NVIDIA GeForce FX 5200" Monitor "DELL 2408WFP" Defaultdepth 24 Option "TwinView" "True" Option "UseEdidFreqs" "True" Option "MetaModes" "1920x1200 +0+0" EndSection I use nvidia-settings to configure my monitors, and it does not show the second GPU. lspci, though, shows: 02:00.0 VGA compatible controller: nVidia Corporation Unknown device 06fd 06:04.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] Which is where I got the BusID settings for the two devices (when I just had one device, I didn't have any BusID listed...and adding the BusID hasn't broken anything). What am I missing? How can I make nvidia-settings show my second GPU so I can then configure its monitor?

    Read the article

  • Configuring three monitors with two Radeon X1600/X1650 graphics cards under Ubuntu

    - by cpm
    I have three SyncMaster 932a monitors I want to use with two Radeon X1600/X1650 cards under Linux. I am running X.org X Server 1.6.0, as provided by Ubuntu's Wubi installer. After turning off mirroring, I ended up with this xorg.conf: Section "Monitor" Identifier "Configured Monitor" EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" Device "Configured Video Device" SubSection "Display" Virtual 2560 1024 EndSubSection EndSection Section "Device" Identifier "Configured Video Device" EndSection The left monitor had a menu bar and a task bar, the center monitor was just desktop, and windows would maximize to the current monitor. The third monitor and second graphics card weren't being used at all. Then I changed my configuration to manually specify each card with their PCI bus: Section "ServerLayout" Identifier "TheLayout" Screen 0 "Radeon Screen 1" Screen 1 "Radeon Screen 2" RightOf "Radeon Screen 1" EndSection Section "Screen" Identifier "Radeon Screen 1" Monitor "Configured Monitor" Device "Radeon the First" SubSection "Display" Virtual 2560 1024 EndSubSection EndSection Section "Screen" Identifier "Radeon Screen 2" Monitor "Configured Monitor" Device "Radeon the Second" EndSection Section "Device" Identifier "Radeon the First" Driver "radeon" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "Radeon the Second" Driver "radeon" BusID "PCI:2:0:0" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Now both the left and right monitors have task bars and menu bars. Windows cannot be dragged from the first two monitors to the third monitor. Also, maximizing in the left or center window fills both monitors. I also tried adding Option "Xinerama" "true" to the ServerLayout section. X11 wasn't able to start up. I want to: Allow moving windows along all three monitors. Maximizing only fills the current monitor. Either have menu/task bars on only the left monitor or all three monitors How can I make this possible?

    Read the article

  • Configuring three monitors with two Radeon X1600/X1650 graphics cards under Ubuntu

    - by cpm
    I have three SyncMaster 932a monitors I want to use with two Radeon X1600/X1650 cards under Linux. I am running X.org X Server 1.6.0, as provided by Ubuntu's Wubi installer. After turning off mirroring, I ended up with this xorg.conf: Section "Monitor" Identifier "Configured Monitor" EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" Device "Configured Video Device" SubSection "Display" Virtual 2560 1024 EndSubSection EndSection Section "Device" Identifier "Configured Video Device" EndSection The left monitor had a menu bar and a task bar, the center monitor was just desktop, and windows would maximize to the current monitor. The third monitor and second graphics card weren't being used at all. Then I changed my configuration to manually specify each card with their PCI bus: Section "ServerLayout" Identifier "TheLayout" Screen 0 "Radeon Screen 1" Screen 1 "Radeon Screen 2" RightOf "Radeon Screen 1" EndSection Section "Screen" Identifier "Radeon Screen 1" Monitor "Configured Monitor" Device "Radeon the First" SubSection "Display" Virtual 2560 1024 EndSubSection EndSection Section "Screen" Identifier "Radeon Screen 2" Monitor "Configured Monitor" Device "Radeon the Second" EndSection Section "Device" Identifier "Radeon the First" Driver "radeon" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "Radeon the Second" Driver "radeon" BusID "PCI:2:0:0" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Now both the left and right monitors have task bars and menu bars. Windows cannot be dragged from the first two monitors to the third monitor. Also, maximizing in the left or center window fills both monitors. I also tried adding Option "Xinerama" "true" to the ServerLayout section. X11 wasn't able to start up. I want to: Allow moving windows along all three monitors. Maximizing only fills the current monitor. Either have menu/task bars on only the left monitor or all three monitors How can I make this possible?

    Read the article

  • Multiple Video Cards - Stuttering

    - by jstawski
    I have two video cards: - XFX PVT84JUDD3 GeForce 8600GT XXX 256MB 128-bit GDDR3 PCI Express x16 SLI Supported Video Card - EVGA 256-P1-N399-LX GeForce 6200 256MB 64-bit GDDR2 PCI Video Card both running the same set of drivers on Windows 7 64-bit. When I work with 2 monitors connected to the 8600GT card everything works smoothly. When I connect the third one to the 6200 then Windows works well and all of a suddon the screens turns black for up to 5 minutes. Then it goes back and at some random interval it goes black again. I can still see the pointer and hit CTRL+ALT+DEL and see the menu to log off, bring the task manager, etc. I've tried changing the 6200 to another PCI slot and the error persists. I've tried connecting 2 monitors only one to each card, same problem. Tried swapping them, mixed and matched the monitors to see if it was a problem with the monitor and my conclusion was that it is not the monitor. The problem also occurred with Vista 64 as well. What could be generating this problem? Can it be the fact that they are different interfaces? Maybe the Motherboard? Should I change something on the BIOS? What do you guys think?

    Read the article

  • Draggable cards (touch enumeration) issue

    - by glitch
    I'm trying to let a player tap, drag and release a card from a fanned stack on the screen to a 4x4 field on the board. My cards are instantiated from a custom class that inherits from the UIImageView class. I started with the Touches sample app, and I modified the event handlers for touches to iterate over my player's card hand instead of the 3 squares the sample app allows you to move on screen. Everything works, until that is, I move the card I'm dragging near another card. I'm really drawing a blank here for the logic to get the cards to behave properly. Here's my code: - (void)touchesBegan:(NSSet *)touches withEvent:(UIEvent *)event { NSUInteger numTaps = [[touches anyObject] tapCount]; if(numTaps = 1) { for (UITouch *touch in touches) { [self dispatchFirstTouchAtPoint:[touch locationInView: self.boardCardView] forEvent:nil]; } } } -(void) dispatchFirstTouchAtPoint:(CGPoint)touchPoint forEvent:(UIEvent *)event { for (int i = 0; i<5; i++) { UIImageView *touchedCard = boardBuffer[i]; if (CGRectContainsPoint([touchedCard frame], touchPoint)) { [self animateFirstTouchAtPoint:touchPoint forView:touchedCard]; } } } - (void)touchesMoved:(NSSet *)touches withEvent:(UIEvent *)event { NSUInteger touchCount = 0; for (UITouch *touch in touches){ [self dispatchTouchEvent:[touch view] toPosition:[touch locationInView:self.boardCardView]]; touchCount++; } } My questions are: How do I get the touch logic to disallow other cards from being picked up by a dragging finger? Is there anyway I can only enumerate the objects that are directly below a player's finger and explicitly disable other objects from responding? Thanks!

    Read the article

  • Operative systems on SD cards

    - by HisDudeness
    I was getting some wild ideas the last days, like putting some operative systems into SD cards rather than on my hard drive. I'll go further into details now and explain what lead me to consider this probably abominable decision. I am on a laptop (that means I have a native SD-card reader) which is currently running a cross-distro setup, with a bunch of Linux systems (placed in dedicated ext4 logical partitions into a huge extended one) regulated by an unique GRUB. Since today, my laptop haven't even seen any Windows system with binoculars. I was thinking about placing all the os part of my setup into a Secure Digital to save all my 500 Gb Hard Drive for documents, music, videos and so on, and being able to just remove the SD and boot my system into another computer too, as well as having the possibility of booting other systems into mine by just plugging in another SD, without having to keep it constantly placed in my PC. Also, in the remote case in the near future I just wanted to boot Windows 8 in it, I read it causes major boot incompatibility issues with other systems by needing a digital signature in order for them to start. By having it in a removable drive, I could just get rid of it when I'm needing him and switch its card with Linux one, and so not having any obstacles to their boot. Now, my questions are: I know unlikely traditional rotating disk drives, integrated circuits ones have a limited lifespan in terms of cluster rewriting. Is it an obstacle to that kind of usage? I mean, some Ultrabooks are using SSD now, is it the same issue, or there are some differences between Solid State Drives and Secure Digitals in that sense? Maybe having them to store system files which are in fixed positions (making the even-usage of cluster technology useless) constantly being re-read and updated and similar things just gets them soon unserviceable, do it? Second question: are all motherboards and BIOSes able to boot from SDs just like they are from USB pen drives (I mean, provided card reader is USB-connected, isn't it)? Or can't bootloaders like GRUB be installed on SDs working? If they can't, is it a solution installing GRUB to MBR and making boot option pointing to SD? Will it work? Are there any other problems to installing OSs on a Secure Digital?

    Read the article

  • Determining credit/debit card type

    - by ct2k7
    Hi, I'm writing a POS application for the iPhone/iPod combination, using the same exact hardware used in Apple Stores:: EasyPay. Ok, my hurdle is this: how do I identify which credit card type is being used as text is entered in the uitextfield? I assume I've to use textField:shouldChangeCharactersInRange:replacementString:? However, I've got ideas floating around, but I simple cannot put them together to form code :/ Any help is appreciated! Thanks in advanced :D

    Read the article

  • SATA drive problems with two SIL RAID cards

    - by Jon Topper
    I've just put a second SiI 3114 SATARaid card in my home server so that I could add another pair of SATA drives and increase my storage space. Annoyingly, it doesn't seem to work: [ 32.816030] ata5: lost interrupt (Status 0x0) [ 32.816072] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 32.816091] ata5.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 32.816094] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 32.816101] ata5.00: status: { DRDY } [ 32.816117] ata5: hard resetting link [ 33.136082] ata5: SATA link down (SStatus 0 SControl 0) [ 36.060940] irq 18: nobody cared (try booting with the "irqpoll" option) [ 36.060949] Pid: 0, comm: swapper Not tainted 2.6.31-20-generic #58-Ubuntu [ 36.060954] Call Trace: [ 36.060977] [] ? printk+0x18/0x1c [ 36.060997] [] __report_bad_irq+0x27/0x90 [ 36.061005] [] note_interrupt+0x150/0x190 [ 36.061011] [] handle_fasteoi_irq+0xac/0xd0 [ 36.061023] [] handle_irq+0x18/0x30 [ 36.061029] [] do_IRQ+0x47/0xc0 [ 36.061042] [] ? irq_exit+0x50/0x70 [ 36.061058] [] ? smp_apic_timer_interrupt+0x57/0x90 [ 36.061065] [] common_interrupt+0x30/0x40 [ 36.061075] [] ? native_safe_halt+0x5/0x10 [ 36.061082] [] default_idle+0x46/0xd0 [ 36.061088] [] cpu_idle+0x8c/0xd0 [ 36.061103] [] rest_init+0x55/0x60 [ 36.061111] [] start_kernel+0x2e6/0x2ec [ 36.061117] [] ? unknown_bootoption+0x0/0x19e [ 36.061133] [] i386_start_kernel+0x7c/0x83 [ 36.061137] handlers: [ 36.061139] [] (sil_interrupt+0x0/0xb0) [ 36.061151] Disabling IRQ #18 [ 38.136014] ata5: hard resetting link [ 38.456022] ata5: SATA link down (SStatus 0 SControl 0) [ 43.456013] ata5: hard resetting link [ 43.776022] ata5: SATA link down (SStatus 0 SControl 0) [ 43.776035] ata5.00: disabled [ 43.776055] ata5.00: device reported invalid CHS sector 0 [ 43.776074] sd 4:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 43.776082] sd 4:0:0:0: [sde] Sense Key : Aborted Command [current] [descriptor] [ 43.776092] Descriptor sense data with sense descriptors (in hex): [ 43.776097] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 43.776112] 00 00 00 00 [ 43.776118] sd 4:0:0:0: [sde] Add. Sense: No additional sense information [ 43.776127] end_request: I/O error, dev sde, sector 0 [ 43.776136] Buffer I/O error on device sde, logical block 0 [ 43.776170] ata5: EH complete [ 43.776187] ata5.00: detaching (SCSI 4:0:0:0) root@core:~# cat /proc/interrupts CPU0 0: 47 IO-APIC-edge timer 1: 8 IO-APIC-edge i8042 6: 3 IO-APIC-edge floppy 7: 0 IO-APIC-edge parport0 8: 0 IO-APIC-edge rtc0 9: 0 IO-APIC-fasteoi acpi 14: 53069 IO-APIC-edge pata_sis 15: 53004 IO-APIC-edge pata_sis 17: 112265 IO-APIC-fasteoi sata_sil 18: 200002 IO-APIC-fasteoi sata_sil, SiS SI7012 19: 111140 IO-APIC-fasteoi eth0 20: 0 IO-APIC-fasteoi ohci_hcd:usb2 21: 0 IO-APIC-fasteoi ohci_hcd:usb3 23: 0 IO-APIC-fasteoi ehci_hcd:usb1 NMI: 0 Non-maskable interrupts LOC: 6650492 Local timer interrupts SPU: 0 Spurious interrupts CNT: 0 Performance counter interrupts PND: 0 Performance pending work RES: 0 Rescheduling interrupts CAL: 0 Function call interrupts TLB: 0 TLB shootdowns TRM: 0 Thermal event interrupts THR: 0 Threshold APIC interrupts MCE: 0 Machine check exceptions MCP: 160 Machine check polls ERR: 0 MIS: 0 root@core:~# lspci | grep Raid 00:09.0 RAID bus controller: Silicon Image, Inc. SiI 3114 [SATALink/SATARaid] Serial ATA Controller (rev 02) 00:0a.0 RAID bus controller: Silicon Image, Inc. SiI 3114 [SATALink/SATARaid] Serial ATA Controller (rev 02) root@core:~# lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 9.10 Release: 9.10 Codename: karmic root@core:~# uname -a Linux core.topper.me.uk 2.6.31-20-generic #58-Ubuntu SMP Fri Mar 12 05:23:09 UTC 2010 i686 GNU/Linux I've tried a combination of different kernel options (irqpoll, noapic, noacpi, pci=noapic) all to no avail. Does anyone have any bright ideas about how I can go about making this work? Swapping PCI cards around isn't an option as there are only two slots in this motherboard (an ASRock K7S41GX). The BIOS doesn't look to have too much in the way of configuration options regarding IRQ usage. Plan B is to ditch this server completely and buy a new QNAP for these drives to go in, but I was hoping to avoid doing this right now.

    Read the article

  • Windows 7 interfering with smart cards

    - by Dennis
    I have an application that uses the PC/SC API to communicate with smart cards. On Windows 7, I get strange results: the data returned from the cards is inconsistent and invalid with certain commands. If I disable the Smart Card Plug and Play service in group policy then everything works fine. Has anyone experienced anything similar? Is there any way to get the smart card plug and play service to play nice? It would be nice to not have to disable it...

    Read the article

  • OpenGL/GLSL checking if shader compiled fine on intel cards

    - by clamp
    hello, i am using this code to check if my glsl shader compiled fine. glGetObjectParameterivARB(obj, GL_OBJECT_INFO_LOG_LENGTH_ARB, &infologLength); if (infologLength > 1) { int charsWritten = 0; char * const infoLog = new char[infologLength]; glGetInfoLogARB(obj, infologLength, &charsWritten, infoLog); tError(infoLog, false); delete infoLog; } } the length of the returned string is empty on nvidia and ATI cards, but on intel cards this one returns the string "no errors." now what is the best way to find out, if there are really no errors? should i just check for this string? or is there a convention what this function glGetInfoLogARB should return?

    Read the article

  • Replacing Credit Card Numbers

    - by Del
    Hi, I'm using an sql to replace credit card numbers with xxxx and finding that REGEX_REPLACE does not consistently replace everything. Below is the SET command i'm using on the SQL SET COMMENTS_LONG = REGEXP_REPLACE (COMMENTS_LONG,'\D[1-6]\d{3}.\d{4}.\d{4}.\d{3}(\d{1}.\d{3})?|\D[1-6]\d{12,15}|\D[1-6]\d{3}.\d{3}.?\d{3}.\d{5}', ' XXXXXXXXXXXXXXXX') Before Elizabeth aclled to change address.5430-6000-2111-1931 A After Elizabeth aclled to change address XXXXXXXXXXXXXXXX1 A I tried increasing the number of X but result is the same. I also find that i have to put a space in front of the first X as it appears to move 1 char to the left.

    Read the article

  • Giving proper credit to a projects contributors

    - by Greg B
    I've recently been working with an opensource library for a commercial product. The opensource code is distributed from the website of the company who sells the proprietary product as a zip file. The library is a (direct) port to C# of the original library which is in Java. As such, it uses methods instead of getter/setter properties. The code contains copyright notices to the supplier of the product. The C# port was originally provided to the company by a 3rd party individual. I have modified the source to be more C# like and added a couple of small features. I want to put my version of the code out there (Google code or where ever) so that C# users of the software can benefit from a more native feeling library. How can I and/or how should I amend the copyright notice to give proper credit to The comercial owner of the original source The guy who provided the original C# port Myself and anyone else who contributes to the project in the future The source is provided under the LGPL V2.1,

    Read the article

  • Paypal credit card validation

    - by Naresh
    Hi all, I want to check that the credit card number provided by customer to my site is valid or not for further transaction. for that i wand to only verify taht the CC no is valid or not by Paypal. A method for that can be with paypal api step 1: DoDirectPayment with PAYMENTACTION=Authorization for amt of $1, then step 2: DoVoid that request Does any one can tell me is any amount is charged by paypal for doing tis stuff? or any other better way you know? My site is in PHP..

    Read the article

  • Should companies require developers to credit code they didn't write?

    - by sunpech
    In academia, it's considered cheating if a student copies code/work from someone/somewhere else without giving credit, and tries to pass it off as his/her own. Should companies make it a requirement for developers to properly credit all non-trivial code and work that they did not produce themselves? Is it useful to do so, or is it simply overkill? I understand there are various free licenses out there, but if I find stuff I like and actually use, I really feel compelled to give credit via comment in code even if it's not required by the license (or lack thereof one).

    Read the article

< Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >