Search Results

Search found 448 results on 18 pages for 'reconnect'.

Page 7/18 | < Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >

  • Unidentified network in Win7

    - by gylns
    I connect the internet through Ad-hoc network, My machine uses win7 and another uses winows xp, There's no problem when I connect the XP machine, but if i disconnect and reconnect the net, then my local network is marked as "Unidentified network",unless restart the XP machine, I don't know why?

    Read the article

  • Arduino - AdHoc Network Setup

    - by methodMan
    I`m currently working with an arduino trying to build an adhoc network to which a device can connect to and send web request to. The problem I am currently having is that I can only set up one connection and then when that connection is terminated (client.stop()) all subsequent connections are not picked up by the server, even a curl command just sits there spinning. The first connection I start when I reset the server works fine and I am able to talk to the server; but after that, the arduino can no longer find new clients (even though it's trying with the library given). I`m using the sparkfun library for the wifly shield cloned from github, along with an Arduino Uno. My current code is based off their default example 'WiFly_AdHoc_Example' but I had to remove a few things to get the network to start up which might be the cause of this problem. Here is the .ino file that I am running. #include <SPI.h> #include <WiFly.h> //#include <SoftwareSerial.h> //SoftwareSerial mySerial( 5, 4); //Part from example not used(see below) WiFlyServer server(80); void setup() { Serial.begin(9600); //The code below is from the example but when I run it the WiFly will hang // on Wifly.begin(). Without it the WiFly starts up fine but only works for // one request. //mySerial.begin(9600); //WiFly.setUart(&mySerial); // Tell the WiFly library that we are not //using the SPIUart Serial.println("**************Starting WiFly**************"); // Enable Adhoc mod WiFly.begin(true); Serial.println("WiFly started, creating network."); if (!WiFly.createAdHocNetwork("wifly")) { Serial.print("Failed to create ad hoc network."); while (1) { // Hang on failure. } } Serial.println("Network created"); Serial.print("IP: "); Serial.println(WiFly.ip()); Serial.println("Starting Server..."); server.begin(); Serial.print("Server started, waiting for client."); } void loop() { delay(200); WiFlyClient client = server.available(); if (client) { Serial.println("Client Found."); // a string to store received commands String current_command = ""; while (client.connected()) { if (client.available()) { //Gets a character from the sent request. char c = client.read(); if (c=='#' || c=='\n') //End of extraneous output { current_command = ""; } else if(c!= '\n') { current_command+=c; } if (current_command== "get") { // output the value of each analog input pin for (int i = 0; i < 6; i++) { client.print("analog input "); client.print(i); client.print(" is "); client.print(analogRead(i)); client.println("<br />"); } } else if(current_command== "hello") { client.println("Hello there, I'm still here."); } else if (current_command== "quit") { client.println("Goodbye..."); client.stop(); current_command == ""; break; } else if (current_command == "*OPEN*") { current_command == ""; } } } // give the web browser time to receive the data delay(200); // close the connection client.stop(); } } If anyone understands this better then I (I`m new to arduino) please leave some helpful comments. Or just help me out on getting this little web server up and running so that I can hit it with more then one request. If there is any other helpful information I can provide please let me know. Thanks for reading and hope you can help. EDIT: Using telnet I can successfully connect (the first time) and send commands to the arduino including one to terminate the connection (calls the client.stop() method). But when I try to reconnect though telnet, it says the connection was successful but on the arduino it's still looping thinking the client is still false. WHAT??? I know right, I'm getting mixed messages from telnet vs arduino. None of the commands work obviously since the ardunio is still looping waiting for a client that evaluates to true. I'm gonna take a look at WiFlyServer from the library I imported and see if I can dig up the problem because somehow that server.available() method isn't finding new clients. Noticing a lot of TODO's in the library code.... EDIT: So I found the reason for the problem, it was in WiFlyServer.cpp file from the sparkfun library. The code that was causing the reconnect issue was infact in the server.availible() method. Right at the top of the method, there is a check: // TODO: Ensure no active non-server client connection. if (!WiFly.serverConnectionActive) { activeClient._port = 0; } For some reason when I comment this out, I can reconnect fine and everything works as it should. I will now dive into the library and see if I can fix this, I'm not exactly sure what this is doing but it gets called when the server connection is not active and is somehow blocking subsequent connections. Does anyone have any ideas how I might get to the root of this problem without using this commenting hack? Please help, no-one has commented or answered yet! Don't you want to join in on the fun???

    Read the article

  • How do i find out which program is using internet and how much?

    - by Anwar Shah
    Sometimes there are unusual Internet activity in my Computer. Modem's lights are always blinking and When I open system monitor, I see there some unknown program is using my precious Internet with 64KB/S (I have 512kbps connection). Still I am in a firefox session with only one tab opened, and the page in already loaded and there is no indication of busy sign in the page (that rotating orange circle). In that situation I unplug my modem and reconnect it again. After several times doing this, that unusual activity stops. It annoys me very much. How can I find out the process which is using the Internet?. How much they are using? How can I kill it? A graphical solution will be better.

    Read the article

  • Bridging: Loosing WLAN network connection with 4addr on option - Why?

    - by WitchCraft
    Question: For use with my Xen VM, I need to create a virtual network interface (vif) that is bridged to wlan0. If in /etc/network/interfaces I add auto xenbr0 iface xenbr0 inet dhcp And then later do brctl addif xenbr0 wlan0 I get this error message. can't add wlan0 to bridge xenbr0: Operation not supported I found out that Linux won't let you bridge a wireless interface in managed mode at all unless you enable the 4addr option (needed to recompile iw): iw dev wlan0 set 4addr on Afterwards brctl addif xenbr0 wlan0 works, and brctl show shows xenbr0 as bridged to wlan0. Unfortunately, as soon as I execute iw dev wlan0 set 4addr on my entire network connection is gone (no connection). As soon as then I execute iw dev wlan0 set 4addr off I reconnect and it works again. If I re-execute 4addr on, it breaks again, if I execute 4addr off, it works again. Unfortunately, I can't just turn 4addr on, activate the bridge and then turn it back off (error: device not ready). Does anybody know why I loose my connection ?

    Read the article

  • How to mount an external Soundcard during startup?

    - by Moe
    I have an external sound card (Soundblaster XFi HD) connected to my Ubuntu 12.04 32-bit. that won't show up automatically after booting. After each boot process I need to plug the card out of the USB port and reconnect it, then it is found by the system and automatically used. I would like to either have it connected automatically during the boot process or at least have a little script or something which I can use after booting so that I don't have to manually plug the device off and on. Please note that I'm a total noob. If you don't mind please tell me the procedure step by step. Also, if I need to get some information via the terminal I'd need to be told the precise command to get it.

    Read the article

  • Backup Your Windows Home Server Off-Site with Asus Webstorage

    - by Mysticgeek
    Windows Home Server lets you backup machines on your network easily. But what about backing up the server data? Today we take a look at ASUS WebStorage for Windows Home Server, which provides you with secure off-site backup for WHS. To use the ASUS WebStorage service you’ll need to sign up for a free account. It offers 1GB of free storage, then you can purchase an unlimited backup package for $39.99 for a year subscription. Note: They also offer online storage for individual PCs as well. Install ASUS WebStorage for WHS Browse to your shared folders on the server and open the Add-Ins folder and copy over the WHSConnectorSetup2.2.4.088.msi file (link below) then close out of the folder. Now launch Windows Home Server Console from one of the computers on your network, click Settings, then Add-ins. Under Available Add-ins click the Available tab and you’ll see the Asus WebStorage installer file we just copied over. Click the Install button. Installation kicks off and when it’s complete, you’ll need to close out of the console and reconnect. Using ASUS WebStorage WHS Connector  When you reconnect to WHS Console, scroll over to the ASUS WebStorage icon and click on Settings. Now log into your ASUS account… Now select the folders you want to backup to the WebStorage service. Select the radio button next to Enable to initialize the backup process… The backup process begins. You can change which folders are backed up simply by disabling the backup process, uncheck the folder(s), then enable the backup again. ASUS WebStorage Site After you have files backed up to the ASUS site, log into your account, and your presented with an overview of the amount of storage you’re using. It also shows what type of files are taking certain amounts of space.   You can browse through your backed up files and folders. It allows you to share and sync backed up data as well. Navigate to the file you want and you can easily download it by clicking on it, or share it out by clicking the share link below it. If you choose to share it, you’re provided with a link to the file to send out to other users.   Conclusion Users of Windows Home Server have been looking for an inexpensive cloud backup solution for quite some time. There are services such as JungleDisk, KeepVault, Wuala…etc. These services probably do a better job, but can start getting expensive once you start uploading a GBs of data. Another disappointment of ASUS WebStorage is you can only backup your WHS shares (from what we’ve been able to determine), it’s an “all or nothing” type of thing. You cannot go in and select individual files and folders. The initial upload speeds can be a bit slow as well, although that might have something to do with limited upload speeds on the DSL connection we used to test it. Retrieving your data from the ASUS site is a breeze though, and all the data files are organized quite well. The WHS Addin is very easy to install and use. If you’re looking for an off-site solution to backup your WHS data, you can test out ASUS WebStorage for free with a 1GB limit. This is good for testing the service and it might be exactly what you’re looking for. Other users may want a more advanced solution like KeepVault or CloudBerry…which is a front end for Amazon S3 storage. Download ASUS WebStorage WHS Addin Other WHS Offsite Backup Solutions CloudBerry, JungleDisk, KeepVault, Wuala Similar Articles Productive Geek Tips Restore Files from Backups on Windows Home ServerGMedia Blog: Setting Up a Windows Home ServerCreate A Windows Home Server Home Computer Restore DiscRemove a Network Computer from Windows Home ServerShare Ubuntu Home Directories using Samba TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7 Microsoft’s “How Do I ?” Videos Home Networks – How do they look like & the problems they cause Check Your IMAP Mail Offline In Thunderbird Follow Finder Finds You Twitter Users To Follow

    Read the article

  • Hamachi² configuration file... Where is it?

    - by Cinaed666
    I recently installed hamachi² and haguichi on my 10.10 machine. It works, but it loses its connection every few minutes and I have to reconnect. I looked into this, and apparently I need to set the KeepAlive in the configuration file to 100. This shouldn't be a hard task, so I looked for the hamachi directory. I checked the obvious place: /home/username/.hamachi ... but this directory doesn't exist. (Yes, I did enable hidden files.) After doing a file search for hamachi, it returned nothing either. I'm in the dark here, what am I missing?

    Read the article

  • using x11 forwarding with ssh and vnc?

    - by simona
    I am working on a remote cluster via ssh with the -X option, because I need to visualize data and graphs, over a vpn protocol. Sometime due to the instability of the internet connection I lose my session. They told me I could use vnc in order to not lose my current session, so that if the internet connection drops I can reconnect and continue with my previously open session. What I do is to log in the remote cluster 'remote.cluster' and type vncserver :1 then I open another terminal on my system and I type ssh -C -NL 5901:remote.cluster:5901 [email protected] & Then I start vinagre on my system and I connect using ssh protocol. The problem is that I do not have x11 forwarding and I cannot open windows. If I try to connect using the vnc protocol with vinagre it doesn't connect, because I get something as connection timeout. What should I do?

    Read the article

  • Why won't my Internet stay connected?

    - by Aubrey
    I recently updated to Ubuntu 12.04, from Ubuntu 10.04, and my Internet, USB760 Novetel Verizon-Wireless Mobile Broadband, will connect after a minute of me starting the computer up. But after a while it will disconnect and the only way to reconnect it is to restart the computer. Even then, sometimes it won't work. I've also noticed that since I've upgraded the computer, the computer will randomly enter into Power Save mode, and then it will tell me to log back in. I've done nothing to provoke it, other than using the Internet. I was wondering, could the entering into Power Save mode and the Internet disconnecting be somehow connected? I've updated the computer every time it asks me to do so, but it doesn't seem to be helping. If Ubuntu 10.04 would still be supported by next year, I would downgrade. But I have no other choice than to stick with 12.04. Any help would be greatly appreciated! Thanks!

    Read the article

  • How to prevent wireless network asking password when briefly out of range

    - by Ian Mackinnon
    When I'm connected to a wireless network from quite far away I sometimes briefly lose the connection. Then Network Manager prompts me to re-confirm the password as if it suspected that was the problem that caused the loss of connection (the password is already filled in in the dialog box). Is this normal behaviour? Can I prevent it from happening and have Network Manager automatically reconnect without the password dialog box when the wireless network comes back into range? I'm using 10.04 (32bit, Gnome) on an Acer Aspire one.

    Read the article

  • Cannot connect to a Wifi network chipset AR9287

    - by Fritz
    After updating my newly installed ubuntu 10.10. I can't connect to the wifi network anymore although it is showing it. Tried to install manufacturer driver INF file via ndiswrapper only makes things worst - lost my wifi. Downloaded and installed the compat-wireless driver for the Atheros AR9287. After installing, i got my wifi connection again but after rebooting I can't reconnect again. The Wifi access point is showing 2/5 to 3/5 signal strength. Laptop: Acer Aspire 4741G Wifi Adapter: Atheros AR9287 OS: Ubuntu 10.10 64bit

    Read the article

  • DSL connection can't connect once disconnected

    - by Aj264
    I have setup a DSL PPPoE connection, over my cable modem, connected to my laptop via ethernet. I have saved the user name and password and set it to connect automatically. This works well when ubuntu starts and i am connected to internet. But if i try to disconnect and then reconnect, the connection wont be established. I have to restart or log out and log in, in order for ubuntu to establish the DSL connection. Any idea why this is happening? I am on ubuntu 11.10 64 bit.

    Read the article

  • Acer Aspire One 722 broadcom 4313 wifi

    - by Colin Matheson
    I had an Acer Aspire One 722 with the Atheros Wifi card and it worked fine on 11.04. So we bought 200 of them for our school. However these all came with the Broadcom BCM4313 wireless card and there are issues. It is using the brcmsmac driver and they connect initially. However after a time (sometimes just a few webpages) some of them lose connection. However, they still have an IP and network-manager says they are connected, but no pages load and you can't ping anything on the LAN or internet. A disconnect/reconnect can fix it, but sometimes a restart is required. It happens frequently so is a major issue. Lots of broadcom drivers are blacklisted: bcm43xx, b43, brcm80211. Any ideas or experiences with the broadcom4313 card? Please save these computers from a Windows fate!

    Read the article

  • Can't connect to WIFI after sleep Ubuntu 14.04

    - by user3380404
    After an upgrade over a previous version to Ubuntu 14.04 I have problems with connecting to WiFi. After suspending it won't reconnect to any existing network unless I restart the laptop. sudo lshw -C network: *-network description: Ethernet interface product: 82567LM Gigabit Network Connection vendor: Intel Corporation physical id: 19 bus info: pci@0000:00:19.0 logical name: eth0 version: 03 serial: 00:27:13:b4:d3:58 capacity: 1Gbit/s width: 32 bits clock: 33MHz capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=2.3.2-k firmware=1.8-3 latency=0 link=no multicast=yes port=twisted pair resources: irq:45 memory:fc200000-fc21ffff memory:fc225000-fc225fff ioport:1840(size=32) *-network description: Wireless interface product: PRO/Wireless 5100 AGN [Shiloh] Network Connection vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 00 serial: 00:26:c6:c6:6b:c8 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.13.0-29-generic firmware=8.83.5.1 build 33692 ip=10.0.1.160 latency=0 link=yes multicast=yes wireless=IEEE 802.11abgn resources: irq:48 memory:f4200000-f4201fff

    Read the article

  • Wired Connection shared with other computers connects then disconnects in 11.10 nm-applet

    - by approbatory
    connecting with shared with other computers connection in NetworkManager. Other computer gets IP but NetworkManager disconnects the shared connection after half a second. This same setup worked perfectly fine in 11.04. Is there any fix, workaround or alternative way to share a connection with another computer over an Ethernet cable. (I can downgrade to 11.04 but I'd rather not ). EDIT: found a workaround The workaround for now is to set IPv6 options to Ignore and then sudo killall dnsmasq. Reconnect and it should work.

    Read the article

  • Wireless speed drops over time and doesn't get up if not reconnected

    - by Vili Lehto
    I am using Ubuntu 12.10 64bit and I have a Asus PCE-N15 wireless card(in PCI-E slot). The problem is that first when I connect to my WiFi network the speed is just fine, and actually my link speed never drops, it shows a solid 150mb/s+ link speed and good signal. But the download and upload speeds drop dramatically after couple minutes of use and I have to reconnect to fix this. Network is type IEEE 802.11bgn and uses WPA2/AES encryption. I don't have similar problems on the windows side, and the network is working fine on every other device. iwconfig shows this: wlan0 IEEE 802.11bgn ESSID:"WLAN-AP" Mode:Managed Frequency:2.412 GHz Access Point: 00:1E:AB:05:EF:31 Bit Rate=300 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr=2347 B Fragment thr:off Encryption key:off Power Management:off Link Quality=61/70 Signal level=-49 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:2 Missed beacon:0 So the question is: Is there a way to fix this? Thanks in advance.

    Read the article

  • Connected to wifi, but quits loading pages after a random amount of time

    - by Collin
    I'm using Ubuntu 12.10, on a TOSHIBA Satellite L755 laptop, and using a Cradlepoint MBR-1000 wireless router. The wifi supposedly works fine on my sisters' and mom's laptops, and my dad uses a wired connection through the router. Nobody else has the problem. It shows that I'm connected and everything. The network manager GUI shows that everything is going just dandy... but it's not. I'll be able to load a page or two, then I have to disconnect, and reconnect to the router to get it to work again for a couple minutes. I noticed when I was downstairs, close to the router, this problem seemed to go away (at least, I was connected for a couple of hours without running into this problem). When I run ping -n 8.8.8.8 it shows this while the connection is still running fine 64 bytes from 8.8.8.8: icmp_req=1187 ttl=47 time=665 ms and whe

    Read the article

  • How do I get rid of the drive mount confirmation question for sshFS on boot?

    - by Dave M G
    With help from this site, I was able to set up an SSHFS connection between two computers on my LAN so that one auto mounts on the other at boot time. Everything works, but there is this annoying confirmation that comes up whenever I boot: An error occurred while mounting /home/dave/Mythbuntu. Press S to skip mounting or M or Manual recovery If I press S, then booting continues, and my drive is mounted as hoped, so it seems like even though I "skipped" it, maybe it tried again and succeeded later in the boot process. I followed the instructions here to set up "if up / if down" scripts, and here is my current /etc/fstab: sshfs#[email protected]:/home/mythbuntu /home/dave/Mythbuntu fuse auto,users,exec,uid=1000,gid=1000,allow_other,reconnect,transform_symlinks,BatchMode=yes 0 0 Although the mounting is working, this step of having to press S every time I boot is obviously kind of a hassle. How do I configure my computer so I don't have to do that, and so that my other computer will still automount?

    Read the article

  • Mouse and keyboard stop working after suspend or screensaver lock

    - by LEo
    If I leave the computer and let it run into screensaver and lock the screen, the mouse left click won't go back to work. If I suspend the computer, the keyboard won't get back to work. It started after upgrading to Ubuntu 11.04. Any tips to solve this problem? The follwing lines I got on dmesg after the problem happened [30536.564415] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1 [30536.565725] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1 [30536.568466] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1 [30536.569790] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1 [30536.571123] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1 [30536.571126] psmouse.c: issuing reconnect request and that after I tried to plug again my USB mouse: [31570.040088] usb 6-1: USB disconnect, address 2 [31573.490095] usb 6-1: new low speed USB device using uhci_hcd and address 3 [31573.687376] input: Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/input/input12 [31573.687544] generic-usb 0003:045E:0084.0002: input,hidraw0: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1d.1-1/input0

    Read the article

  • How do I get rid of this drive mount confirmation question when booting the computer?

    - by Dave M G
    With help from this site, I was able to set up an SSHFS connection between two computers on my LAN so that one auto mounts on the other at boot time. Everything works, but there is this annoying confirmation that comes up whenever I boot: An error occurred while mounting /home/dave/Mythbuntu. Press S to skip mounting or M or Manual recovery If I press S, then booting continues, and my drive is mounted as hoped, so it seems like even though I "skipped" it, maybe it tried again and succeeded later in the boot process. I followed the instructions here to set up "if up / if down" scripts, and here is my current /etc/fstab: sshfs#[email protected]:/home/mythbuntu /home/dave/Mythbuntu fuse auto,users,exec,uid=1000,gid=1000,allow_other,reconnect,transform_symlinks,BatchMode=yes 0 0 Although the mounting is working, this step of having to press S every time I boot is obviously kind of a hassle. How do I configure my computer so I don't have to do that, and so that my other computer will still automount?

    Read the article

  • Discover Why Computer Shut Down

    - by kzh
    I was at school SSHing to my homebox. All of a sudden, my connection was closed. Attempting to reconnect failed. When I returned home, I discovered that my computer was off. Nobody was at my house and I am sure that I did not have a power outage. How can I figure out how or why my computer shut off? Is there some log in /var/log that could point me in the right direction? Should there be a core dump somewhere that I should find? If so, how do I use core dumps?

    Read the article

  • How to restart WiFi interface without rebooting (it drops connection)?

    - by Dima
    I boot into ubuntu and it connects to the Wifi network fine. After about 10-15min the DNS stop resolving any website and a couple of minutes later network-managers tells me that I'm disconnected and tries to reconnect constantly to my router and fails to do it. Upon Ubuntu restart everything works fine for the first 10-15min again. When I boot into Mac OS X everything is fine with the same connection! How do I restart wifi interface? sudo ifdow wlan0 just tells me that wlan0 is not configured and wlan0 doesn't appear in /etc/network/interfaces either, which I find strange.... (unless network-manager is doing it behind my back).

    Read the article

  • dhcp configuration not working ubuntu 11.10

    - by Vivek Pradhan
    I am usually behind a proxy server in college so I connect to the ethernet or wifi using manual IPv4 addresses only inside college. I have been trying really hard to get the internet work at home, there is no proxy and I have set the network to use automatic dhcp. It seems like it is not able to connect to the port, It gets disconnected after some time automatically and then tries to reconnect. The same thing is happening with wifi networks also, after some time i see a pop up asking for authentication and ultimately its not able to connect. What might be the problem here. I looked up some similar questions and checked the /etc/network/interfaces file and looks like this: auto lo iface lo inet loopback I have no idea what those lines mean but there is no configuration for eth0 or wlan0. Any help is deeply appreciated. Ubuntu loses it charms due to these small glitches.

    Read the article

  • Fixing IP Renewal After Laptop Suspend

    - by Cerin
    I have a laptop running Ubuntu 10.04, and I've noticed that with some wifi networks, but not all, I'm unable to reconnect after coming out of suspension. I've tried both Network Manager and Wicd management daemons, and both get through validation, but get hung up on "Acquiring IP address...". The only solution I've found is to reboot the machine, after which it acquires an IP address very quickly. What's the underlying issue here? What would be a more efficient way to resolve the problem? EDIT: I've noticed that if I open Wicd and manually press "Connect", it fails to acquire an IP. However, if I do nothing and let it automatically try and connect, it acquires an IP and connects just fine...

    Read the article

  • How to restart WiFi interface without rebooting (it drops connection)?

    - by Dima
    I boot into ubuntu and it connects to the Wifi network fine. After about 10-15min the DNS stop resolving any website and a couple of minutes later network-managers tells me that I'm disconnected and tries to reconnect constantly to my router and fails to do it. Upon Ubuntu restart everything works fine for the first 10-15min again. When I boot into Mac OS X everything is fine with the same connection! How do I restart wifi interface? sudo ifdow wlan0 just tells me that wlan0 is not configured and wlan0 doesn't appear in /etc/network/interfaces either, which I find strange.... (unless network-manager is doing it behind my back).

    Read the article

< Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >