Search Results

Search found 1939 results on 78 pages for 'closing'.

Page 70/78 | < Previous Page | 66 67 68 69 70 71 72 73 74 75 76 77  | Next Page >

• Flash AS3 button eventlistener array bug

  - by Tyler Pepper

  Hi there, this is my first time posting a question here. I have an array of 12 buttons on a timeline that when first visiting that part of the timeline, get a CLICK eventlistener added to them using a for loop. All of them work perfectly at that point. When you click one it plays a frame label inside the specific movieClip and reveals a bio on the corresponding person with a close button and removes the CLICK eventlisteners for each button, again using a for loop. The close button plays a closing animation, and then the timeline goes back to the first frame (the one with the 12 buttons on it) and the CLICK eventlisteners are re-added, but now only the first 9 buttons of the array work. There are no output errors and the code to re-add the eventlisteners is exactly the same as the first time that works. I am completely at a loss and am wondering if anyone else has run into this problem. All of my buttons are named correctly, there are absolutely no output errors (I've used the debug module) and I made sure the array with the buttons in it is outputting all 12 at the moment the close button is clicked to add the eventlisteners back. for (var q = 0; q < ackBoDBtnArray.length; q++){ contentArea_mc.acknowledgements_mc.BoD_mc[ackBoDBtnArray[q]].addEventListener(MouseEvent.CLICK, showBio); } private function showBio(eo:MouseEvent):void { trace("show the bio"); bodVar = ackBoDBtnArray.getIndex(eo.target.name); contentArea_mc.acknowledgements_mc.BoD_mc.gotoAndPlay(ackBoDPgArray[bodVar]); contentArea_mc.acknowledgements_mc.BoD_mc.closeBio_btn.addEventListener(MouseEvent.CLICK, hideBio); for (var r = 0; r < ackBoDBtnArray.length; r++){ contentArea_mc.acknowledgements_mc.BoD_mc[ackBoDBtnArray[r]].mouseEnabled = false; contentArea_mc.acknowledgements_mc.BoD_mc[ackBoDBtnArray[r]].removeEventListener(MouseEvent.CLICK, showBio); } } private function hideBio(eo:MouseEvent):void { trace("hide it!"); contentArea_mc.acknowledgements_mc.BoD_mc.closeBio_btn.removeEventListener(MouseEvent.CLICK, hideBio); contentArea_mc.acknowledgements_mc.BoD_mc.gotoAndPlay(ackBoDClosePgArray[bodVar]); for (var s = 0; s < ackBoDBtnArray.length; s++){ trace(ackBoDBtnArray[s]); contentArea_mc.acknowledgements_mc.BoD_mc[ackBoDBtnArray[s]].mouseEnabled = true; contentArea_mc.acknowledgements_mc.BoD_mc[ackBoDBtnArray[s]].addEventListener(MouseEvent.CLICK, showBio); } Thanks in advance for any help and insight you can provide...I have a slight feeling that its something that may be obvious to another set of eyes...haha.

  Read the article

• AJAX response not valid in C++ but Apache

  - by fehergeri

  I want to make a server written in C++ to power my game. I learned the basics of sockets and wrote a basic chat program that worked well. Now I want to create an HTTP server like Apache, but only for the AJAX request-response part. I think just for the beginning i copied one Apache response text, and i sent the exact response with the C++ server program. The problem that is that the browser (Firefox) connnects to the apache and everything works fine, except all of the requests get a correct response. But if i send this with the C++ client, then FireBug tells me that the response status is OK (200) but there is no actual response text. (How is this possible?) This response-text is exactly the same what apache sends. I made a bit-bit comparison and they were the same. The php file wich is the original response <?php echo "AS";echo rand(0,9); ?> And the origional source code: Socket.h http://pastebin.com/bW9qxtrR Socket.cpp http://pastebin.com/S3c8RFM7 main.cpp http://pastebin.com/ckExuXsR index.html http://pastebin.com/mcfEEqPP < this is the requester file. ajax.js http://pastebin.com/uXJe9hVC benchmark.js http://pastebin.com/djSYtKg9 jQuery is not needed. The main.cpp there is lot of trash code like main3 and main4 functions, these do not affect the result. I know that the response stuff in the C++ code is not really good because the connection closing is not the best; I will fix that later now I want to send a success response first. UPDATE: now i tested today a lot again and i find out there is no problem with the socket. I used the fiddler program to capture the the good answer and to capture the bad. They were the same. After this i turned off my socket application, and forced fiddler to auto respond, and the answer from the 'bad' answer still bat. So after that i replaced the bad with the good and nothing happedned. The bad answer with the good text still bad on the :8888 port but the other on the original :80 port was good, but they were absolutly the same and the same program sended it (fiddler) i think there is something missing if the response is not on the same server address (even not the same port). UPDATE: oh my god! i cant send ajax request to a remote server. now i know this.

  Read the article

• How to solve Python memory leak when using urrlib2?

  - by b_m

  Hi, I'm trying to write a simple Python script for my mobile phone to periodically load a web page using urrlib2. In fact I don't really care about the server response, I'd only like to pass some values in the URL to the PHP. The problem is that Python for S60 uses the old 2.5.4 Python core, which seems to have a memory leak in the urrlib2 module. As I read there's seems to be such problems in every type of network communications as well. This bug have been reported here a couple of years ago, while some workarounds were posted as well. I've tried everything I could find on that page, and with the help of Google, but my phone still runs out of memory after ~70 page loads. Strangely the Garbege Collector does not seem to make any difference either, except making my script much slower. It is said that, that the newer (3.1) core solves this issue, but unfortunately I can't wait a year (or more) for the S60 port to come. here's how my script looks after adding every little trick I've found: import urrlib2, httplib, gc while(true): url = "http://something.com/foo.php?parameter=" + value f = urllib2.urlopen(url) f.read(1) f.fp._sock.recv=None # hacky avoidance f.close() del f gc.collect() Any suggestions, how to make it work forever without getting the "cannot allocate memory" error? Thanks for advance, cheers, b_m update: I've managed to connect 92 times before it ran out of memory, but It's still not good enough. update2: Tried the socket method as suggested earlier, this is the second best (wrong) solution so far: class UpdateSocketThread(threading.Thread): def run(self): global data while 1: url = "/foo.php?parameter=%d"%data s = socket.socket(socket.AF_INET, socket.SOCK_STREAM) s.connect(('something.com', 80)) s.send('GET '+url+' HTTP/1.0\r\n\r\n') s.close() sleep(1) I tried the little tricks, from above too. The thread closes after ~50 uploads (the phone has 50MB of memory left, obviously the Python shell has not.) UPDATE: I think I'm getting closer to the solution! I tried sending multiple data without closing and reopening the socket. This may be the key since this method will only leave one open file descriptor. The problem is: import socket s=socket.socket(socket.AF_INET, socket.SOCK_STREAM) socket.connect(("something.com", 80)) socket.send("test") #returns 4 (sent bytes, which is cool) socket.send("test") #4 socket.send("test") #4 socket.send("GET /foo.php?parameter=bar HTTP/1.0\r\n\r\n") #returns the number of sent bytes, ok socket.send("GET /foo.php?parameter=bar HTTP/1.0\r\n\r\n") #returns 0 on the phone, error on Windows7* socket.send("GET /foo.php?parameter=bar HTTP/1.0\r\n\r\n") #returns 0 on the phone, error on Windows7* socket.send("test") #returns 0, strange... *: error message: 10053, software caused connection abort Why can't I send multiple messages??

  Read the article

• Hide a base class method from derived class, but still visible outside of assembly

  - by clintp

  This is a question about tidyness. The project is already working, I'm satisfied with the design but I have a couple of loose ends that I'd like to tie up. My project has a plugin architecture. The main body of the program dispatches work to the plugins that each reside in their own AppDomain. The plugins are described with an interface, which is used by the main program (to get the signature for invoking DispatchTaskToPlugin) and by the plugins themselves as an API contract: namespace AppServer.Plugin.Common { public interface IAppServerPlugin { void Register(); void DispatchTaskToPlugin(Task t); // Other methods omitted } } In the main body of the program Register() is called so that the plugin can register its callback methods with the base class, and then later DispatchTaskToPlugin() is called to get the plugin running. The plugins themselves are in two parts. There's a base class that implements the framework for the plugin (setup, housekeeping, teardown, etc..). This is where DispatchTaskToPlugin is actually defined: namespace AppServer.Plugin { abstract public class BasePlugin : MarshalByRefObject, AppServer.Plugin.Common.IAppServerPlugin { public void DispatchTaskToPlugin(Task t) { // ... // Eventual call to actual plugin code // } // Other methods omitted } } The actual plugins themselves only need to implement a Register() method (to give the base class the delegates to call eventually) and then their business logic. namespace AppServer.Plugin { public class Plugin : BasePlugin { override public void Register() { // Calls a method in the base class to register itself. } // Various callback methods, business logic, etc... } } Now in the base class (BasePlugin) I've implemented all kinds of convenience methods, collected data, etc.. for the plugins to use. Everything's kosher except for that lingering method DispatchTaskToPlugin(). It's not supposed to be callable from the Plugin class implementations -- they have no use for it. It's only needed by the dispatcher in the main body of the program. How can I prevent the derived classes (Plugin) from seeing the method in the base class (BasePlugin/DispatchTaskToPlugin) but still have it visible from outside of the assembly? I can split hairs and have DispatchTaskToPlugin() throw an exception if it's called from the derived classes, but that's closing the barn door a little late. I'd like to keep it out of Intellisense or possibly have the compiler take care of this for me. Suggestions?

  Read the article

• Cannot run public class in one .java from another

  - by DIOS

  I have created a basic program that takes whatever is input into two textfields and exports them to a file. I would now like to encrypt that file, and alredy have the encryptor. The problem is that I cannot call it. Here is my code for the encryptor: import java.io.File; import java.io.FileInputStream; import java.io.FileOutputStream; import java.io.*; import javax.crypto.Cipher; import javax.crypto.CipherInputStream; import javax.crypto.CipherOutputStream; import javax.crypto.spec.SecretKeySpec; public class FileEncryptor { private String algo; private File file; public FileEncryptor(String algo,String path) { this.algo=algo; //setting algo this.file=new File(path); //settong file } public void encrypt() throws Exception{ //opening streams FileInputStream fis =new FileInputStream(file); file=new File(file.getAbsolutePath()); FileOutputStream fos =new FileOutputStream(file); //generating key byte k[] = "HignDlPs".getBytes(); SecretKeySpec key = new SecretKeySpec(k,algo.split("/")[0]); //creating and initialising cipher and cipher streams Cipher encrypt = Cipher.getInstance(algo); encrypt.init(Cipher.ENCRYPT_MODE, key); CipherOutputStream cout=new CipherOutputStream(fos, encrypt); byte[] buf = new byte[1024]; int read; while((read=fis.read(buf))!=-1) //reading data cout.write(buf,0,read); //writing encrypted data //closing streams fis.close(); cout.flush(); cout.close(); } public static void main (String[] args)throws Exception { new FileEncryptor("DES/ECB/PKCS5Padding","C:\\Users\\*******\\Desktop\\newtext").encrypt();//encrypts the current file. } } Here is the section of my file creator that is failing to call this: FileWriter fWriter = null; BufferedWriter writer = null; try{ fWriter = new FileWriter("C:\\Users\\*******\\Desktop\\newtext"); writer = new BufferedWriter(fWriter); writer.write(Data); writer.close(); f.dispose(); FileEncryptor encr = new FileEncryptor(); //problem lies here. encr.encrypt //public void that does the encryption. new complete(); //different .java that is working fine.

  Read the article

• UINavigation Bar while moving view for writing in a textfield

  - by ObiWanKeNerd

  i'm using this code to move the view when i'm about to type on a textfield, otherwise the keyboard may cover the textfield if it's in the lower side of the screen. I would like to know if there is a way to maintain the UINavigation Bar in it's place, because with this code the bar will move with all the view outside the screen, becoming untouchable until i end editing the textfield (closing the keyboard). CGFloat animatedDistance; static const CGFloat KEYBOARD_ANIMATION_DURATION = 0.3; static const CGFloat MINIMUM_SCROLL_FRACTION = 0.2; static const CGFloat MAXIMUM_SCROLL_FRACTION = 0.8; static const CGFloat PORTRAIT_KEYBOARD_HEIGHT = 216; static const CGFloat LANDSCAPE_KEYBOARD_HEIGHT = 162; - (void)textFieldDidBeginEditing:(UITextField *)textField { CGRect textFieldRect = [self.view.window convertRect:textField.bounds fromView:textField]; CGRect viewRect = [self.view.window convertRect:self.view.bounds fromView:self.view]; CGFloat midline = textFieldRect.origin.y + 0.5 * textFieldRect.size.height; CGFloat numerator = midline - viewRect.origin.y - MINIMUM_SCROLL_FRACTION * viewRect.size.height; CGFloat denominator = (MAXIMUM_SCROLL_FRACTION - MINIMUM_SCROLL_FRACTION) * viewRect.size.height; CGFloat heightFraction = numerator / denominator; if (heightFraction < 0.0) { heightFraction = 0.0; } else if (heightFraction > 1.0) { heightFraction = 1.0; } UIInterfaceOrientation orientation = [[UIApplication sharedApplication] statusBarOrientation]; if (orientation == UIInterfaceOrientationPortrait || orientation == UIInterfaceOrientationPortraitUpsideDown) { animatedDistance = floor(PORTRAIT_KEYBOARD_HEIGHT * heightFraction); } else { animatedDistance = floor(LANDSCAPE_KEYBOARD_HEIGHT * heightFraction); } CGRect viewFrame = self.view.frame; viewFrame.origin.y -= animatedDistance; [UIView beginAnimations:nil context:NULL]; [UIView setAnimationBeginsFromCurrentState:YES]; [UIView setAnimationDuration:KEYBOARD_ANIMATION_DURATION]; [self.view setFrame:viewFrame]; [UIView commitAnimations]; } - (void)textFieldDidEndEditing:(UITextField *)textField { CGRect viewFrame = self.view.frame; viewFrame.origin.y += animatedDistance; [UIView beginAnimations:nil context:NULL]; [UIView setAnimationBeginsFromCurrentState:YES]; [UIView setAnimationDuration:KEYBOARD_ANIMATION_DURATION]; [self.view setFrame:viewFrame]; [UIView commitAnimations]; } Thanks in advance!

  Read the article

• Is there a recommended approach to handle saving data in response to within-site navigation without

  - by Carvell Fenton

  Hello all, Preamble to scope my question: I have a web app (or site, this is an internal LAN site) that uses jQuery and AJAX extensively to dynamically load the content section of the UI in the browser. A user navigates the app using a navigation menu. Clicking an item in the navigation menu makes an AJAX call to php, and php then returns the content that is used to populate the central content section. One of the pages served back by php has a table form, set up like a spreadsheet, that the user enters values into. This table is always kept in sync with data in the database. So, when the table is created, is it populated with the relevant database data. Then when the user makes a change in a "cell", that change immediately is written back to the database so the table and database are always in sync. This approach was take to reassure users that the data they entered has been saved (long story...), and to alleviate them from having to click a save button of some kind. So, this always in sync idea is great, except that a user can enter a value in a cell, not take focus out of the cell, and then take any number of actions that would cause that last value to be lost: e.g. navigate to another section of the site via the navigation menu, log out of the app, close the browser, etc. End of preamble, on to the issue: I initially thought that wasn't a problem, because I would just track what data was "dirty" or not saved, and then in the onunload event I would do a final write to the database. Herein lies the rub: because of my clever (or not so clever, not sure) use of AJAX and dynamically loading the content section, the user never actually leaves the original url, or page, when the above actions are taken, with the exception of closing the browser. Therefore, the onunload event does not fire, and I am back to losing the last data again. My question, is there a recommended way to handle figuring out if a person is navigating away from a "section" of your app when content is dynamically loaded this way? I can come up with a solution I think, that involves globals and tracking the currently viewed page, but I thought I would check if there might be a more elegant solution out there, or a change I could make in my design, that would make this work. Thanks in advance as always!

  Read the article

• Simaltaneous connections with PHP and SOAP?

  - by Dov

  I'm new to using SOAP and understanding the utmost basics of it. I create a client resource/connection, I then run some queries in a loop and I'm done. The issue I am having is when I increase the iterations of the loop, ie: from 100 to 1000, it seems to run out of memory and drops an internal server error. How could I possibly run either a) multiple simaltaneous connections or b) create a connection, 100 iterations, close connection, create connection.. etc. "a)" looks to be the better option but I have no clue as to how to get it up and running whilst keeping memory (I assume opening and closing connections) at a minimum. Thanks in advance! index.php <?php // set loops to 0 $loops = 0; // connection credentials and settings $location = 'https://theconsole.com/'; $wsdl = $location.'?wsdl'; $username = 'user'; $password = 'pass'; // include the console and client classes include "class_console.php"; include "class_client.php"; // create a client resource / connection $client = new Client($location, $wsdl, $username, $password); while ($loops <= 100) { $dostuff; } ?> class_console.php <?php class Console { // the connection resource private $connection = NULL; /** * When this object is instantiated a connection will be made to the console */ public function __construct($location, $wsdl, $username, $password, $proxyHost = NULL, $proxyPort = NULL) { if(is_null($proxyHost) || is_null($proxyPort)) $connection = new SoapClient($wsdl, array('login' => $username, 'password' => $password)); else $connection = new SoapClient($wsdl, array('login' => $username, 'password' => $password, 'proxy_host' => $proxyHost, 'proxy_port' => $proxyPort)); $connection->__setLocation($location); $this->connection = $connection; return $this->connection; } /** * Will print any type of data to screen, where supported by print_r * * @param $var - The data to print to screen * @return $this->connection - The connection resource **/ public function screen($var) { print '<pre>'; print_r($var); print '</pre>'; return $this->connection; } /** * Returns a server / connection resource * * @return $this->connection - The connection resource */ public function srv() { return $this->connection; } } ?>

  Read the article

• iPhone app works hundreds of times, then crashes from memory error on startup, then never works unti

  - by peter

  I have a Cocos2d/openGL iPhone game. It's a universal app and I'm dealing with an occasional but nasty error on the iPad. We are loading a lot of textures up front (3 2048x2048 textures). I'm working on reducing this up front load, but what worries me is I really don't understand the root cause of this crash that permanently breaks the app. This is the deal: 1. App works fine for hundreds of plays on the iPad 2. Eventually (I'm guessing due to other programs using up some memory and not letting go or whatever) the app starts crashing on startup. It just closes again in the middle of loading. 3. The App will now never work again on that iPad, closing immediately every time, until the iPad is restarted. Obviously my app is demanding too much memory up front to work reliably every time, I get that. What I don't get is why when it fails once, it has failed forever until the iPad is restarted. Can anyone explain what is going on here? EDIT: forgot to add organizer crash lags just say low memory, like this every time (I changed my app name to MyAppName below). Again, I know it's low memory, but why does it stay low memory until restart?: Incident Identifier: E7A2507C-3FB1-4E3B-B315-09F094236541 CrashReporter Key: 0fda9d667f2c6073f20a76809aa25438b6854d15 OS Version: iPhone OS 3.2 (7B367) Date: 2010-04-30 16:59:44 -0400 Free pages: 437 Wired pages: 17228 Purgeable pages: 0 Largest process: MyAppName Processes Name UUID Count resident pages MyAppName <6307ce41802850944baa78d29224fa7f> 22385 (jettisoned) (active) mediaserverd <ea8bac28b06fe3980fdd44b5caceb563> 242 DTMobileIS <a0f651e43881e66f50f8a95abea72921> 5826 notification_pro <4c9a7ee0a5bbe160465991228f2d2f2e> 67 syslog_relay <4ceaed776d2df957fa130712f4ef21d0> 66 notification_pro <4c9a7ee0a5bbe160465991228f2d2f2e> 67 notification_pro <4c9a7ee0a5bbe160465991228f2d2f2e> 67 afcd <4f3c9566e33b4463f05603d990584e5d> 72 ptpd <83de0f774bd6553d513ae9e19b0f9b56> 181 syslogd <66247e305d5c0bf6f1ce1cc950653263> 81 lsd <a4d852c1c8da2b3d231bdc90887b52ba> 130 iapd <a8534cbde4b90ad5915dd26ab03ff3e3> 204 notifyd <5e9d5bee7c3eae1c8b494c79eb11406e> 71 BTServer <64e4a6ea6b1240db2331e05a29caa862> 108 CommCenter <97bf297944ac4bde19bcee96dd23bd5f> 181 SpringBoard <c7a5904c12db7b14334a4edaa4cabaa9> 5339 (active) configd <aca9fa3380322669164fd6b1a3864300> 373 fairplayd.K48 <2d997ffca1a568f9c5400ac32d8f0782> 84 locationd <dd1ea88105c62173908ce767db5c4d37> 599 mDNSResponder <820560222d47a1f2a0dce98a7f8a9721> 108 lockdownd <497fd54c79a680bf29f5d9320f514613> 303 MobileStorageMou <c277b79c2157c4dc5cfc5c3ca35bd5f2> 69 launchd <66972eee4d865c4383b33d985d22994b> 98 **End**

  Read the article

• CSV File Content Display Issue

  - by Pankaj Khurana

  Hi, I want to retrieve contents from a csv file for that i am using following code: <?php $fo = fopen("record.csv", "rb+"); while(!feof($fo)) { $contents[] = fgetcsv($fo,0,';'); } print_r($contents); fclose($fo); ?> But my records are displayed in the following format: ????††???????†††??†††††????"Search Transactions Results" ††††??†???????††††?††††††??? ???????????? ?????????????? ?????????? My csv file format: "Search Transactions Results" "Transaction ID","Reference Transaction ID","Date","Type","Subject","Item Number","Item Name","Invoice ID","Name","Email","Shipping Name","Shipping Address Line 1","Shipping Address Line 2","Shipping Address City","Shipping State/Province","Shipping Zip/Postal Code","Shipping Address Country","Shipping Method","Address Status","Contact Phone Number","Gross Amount","Receipt ID","Custom Field","Option 1 Name","Option 1 Value","Option 2 Name","Option 2 Value","Note","Auction Site","Auction User ID","Item URL","Auction Closing Date","Insurance Amount","Currency","Fees","Net Amount","Shipping & Handling Amount","Sales Tax Amount","To Email","Time","Time Zone" "1T","",5/5/2010 2:10:44 PM,"Payment Processed","CFP Self Study Kit","1","CFP Self Study Kit","","User1","[email protected]","","","","","","","","","N","","68.18","R1","","","","","","","","","",,"","USD","-2.62","65.56","0","0","[email protected]","01:40","Asia/Calcutta" "2T","",5/19/2010 4:04:08 PM,"Payment Processed","CFP Self Study Kit","1","CFP Self Study Kit","","User2","[email protected]","","","","","","","","","N","","68.18","R2","","","","","","","","","",,"","USD","-2.62","65.56","0","0","[email protected]","03:34","Asia/Calcutta" "3T","1RT",5/19/2010 5:28:45 PM,"Currency Conversion Completed","","","",""," ","","","","","","","","","","N","","17492.6","","","","","","","","","","",,"","INR","0","17492.6","0","0","","04:58","Asia/Calcutta" "4T","2RT",5/19/2010 5:28:45 PM,"Currency Conversion Completed","","","",""," ","","","","","","","","","","N","","-393.36","","","","","","","","","","",,"","USD","0","-393.36","0","0","","04:58","Asia/Calcutta" "5T","",5/19/2010 5:28:45 PM,"Transfer to Bank Initiated","P1006","","P1006",""," ","","","","","","","","","","N","","-17492.6","","","","","","","","","","",,"","INR","0","-17492.6","0","0","","04:58","Asia/Calcutta" "6T","",5/20/2010 5:38:02 PM,"Transfer to Bank Completed","P1006","","P1006",""," ","","","","","","","","","","N","","-17492.6","","","","","","","","","","",,"","INR","0","-17492.6","0","0","","05:08","Asia/Calcutta" "7T","",5/21/2010 12:32:37 PM,"Payment Processed","FP - LVC Plus","","FP - LVC Plus","","User3","[email protected]","User3","NEW DELHI","BEHIND KARNATAKA BANK LD","SOUTH","NEW DELHI","110023","IN","","N","","283.96","","","","","","","","","","",,"","USD","-9.95","274.01","0","0","[email protected]","00:02","Asia/Calcutta" "8T","",5/25/2010 4:40:48 PM,"Transfer to Bank Initiated","P1006","","P1006",""," ","","","","","","","","","","N","","-12569.85","","","","","","","","","","",,"","INR","0","-12569.85","0","0","","04:10","Asia/Calcutta" "9T","3RT",5/25/2010 4:40:48 PM,"Currency Conversion Completed","","","",""," ","","","","","","","","","","N","","-274.01","","","","","","","","","","",,"","USD","0","-274.01","0","0","","04:10","Asia/Calcutta" "10T","4RT",5/25/2010 4:40:48 PM,"Currency Conversion Completed","","","",""," ","","","","","","","","","","N","","12569.85","","","","","","","","","","",,"","INR","0","12569.85","0","0","","04:10","Asia/Calcutta" "11T","",5/26/2010 4:57:39 PM,"Transfer to Bank Completed","P1006","","P1006",""," ","","","","","","","","","","N","","-12569.85","","","","","","","","","","",,"","INR","0","-12569.85","0","0","","04:27","Asia/Calcutta" "Total","-247.05 USD","-15.19","-262.24" "Total","0.00 INR","0.00","0.00" I want to retrieve the records where "Type"="Payment Processed". I want to retrieve content in a key value format that is for e.g. Transaction ID-1T as i have to store this values in a database but display is not proper. I am unable to find out the reason for the same please help me on this. Thanks

  Read the article

• Few doubts regarding Bitmaps , Images & `using` blocks

  - by imageWorker

  I caught up in this problem. http://stackoverflow.com/questions/2559826/garbage-collector-not-doing-its-job-memory-consumption-1-5gb-outofmemory-exc I feel that there is something wrong in my understanding. Please clarify these things. Destructor & IDisposable.Dispose are two methods for freeing resources that are not not under the control of .NET. Which means, everything except memory. right? using blocks are just better way of calling IDisposable.Dispose() method of an object. This is the main code I'm referring to. class someclass { static someMethod(Bitmap img) { Bitmap bmp = new Bitmap(img); //statement1 // some code here and return } } here is class I'm using for testing: class someotherClass { public static voide Main() { foreach (string imagePath in imagePathsArray) { using (Bitmap img1 = new Bitmap(imagePath)) { someclass.someMethod(img1); // does some more processing on `img1` } } } } Is there any memory leak with statement1? Question1: If each image size is say 10MB. Then does this bmp object occupy atleast 10MB? What I mean is, will it make completely new copy of entire image? or just refer to it? Question2:should I or should I not put the statement1 in using block? My Argument: We should not. Because using is not for freeing memory but for freeing the resources (file handle in this case). If I use it in using block. It closes file handle here encapsulated by this bmp object. It means we are also closing filehandle for the caller's img1 object. Which is not correct? As of the memory leak. No there is no scope of memory leak here. Because reference bmp is destroyed when this method is returned. Which leaves memory it refered without any pointer. So, its garbage collected. Am I right? Edit: class someclass { static Bitmap someMethod(Bitmap img) { Bitmap bmp = new Bitmap(img); //can I use `using` block on this enclosing `return bmp`; ??? // do some processing on bmp here return bmp; } }

  Read the article

• File Output using Gforth

  - by sheepez

  As a first project I have been writing a short program to render the Mandelbrot fractal. I have got to the point of trying to output my results to a file ( e.g. .bmp or .ppm ) and got stuck. I have not really found any examples of exactly what I am trying to do, but I have found two examples of code to copy from one file to another. The examples in the Gforth documentation ( Section 3.27 ) did not work for me ( winXP ) in fact they seemed to open and create files but not write to files properly. This is the Gforth documentation example that copies the contents of one file to another: 0 Value fd-in 0 Value fd-out : open-input ( addr u -- ) r/o open-file throw to fd-in ; : open-output ( addr u -- ) w/o create-file throw to fd-out ; s" foo.in" open-input s" foo.out" open-output : copy-file ( -- ) begin line-buffer max-line fd-in read-line throw while line-buffer swap fd-out write-line throw repeat ; I found this example ( http://rosettacode.org/wiki/File_IO#Forth ) which does work. The main problem is that I can't isolate the part that writes to a file and have it still work. The main confusion is that r doesn't seem to consume TOS as I might expect. : copy-file2 ( a1 n1 a2 n2 -- ) r/o open-file throw >r w/o create-file throw r> begin pad maxstring 2 pick read-file throw ?dup while pad swap 3 pick write-file throw repeat close-file throw close-file throw ; \ Invoke it like this: s" output.txt" s" input.txt" copy-file I would be very grateful if someone could explain exactly how the open, create read and write -file words actually work, as my investigation keeps resulting in somewhat bizarre stacks. Any clues as to why the Gforth examples do not work might help too. In summary, I want to output from Gforth to a file and so far have been thwarted. Can anyone offer any help? Thank you Vijay, I think that I understand the example that you gave. However when I try to use something like this ( which I think is similar ): 0 value test-file : write-test s" testfile.out" w/o create-file throw to test-file s" test text" test-file write-line ; I get ok but nothing is put into the file, have I made a mistake? It seems that the problem was due to not flushing the relevant buffers or explicitly closing the file. Adding something like test-file flush-file throw or test-file close-file throw between write-line and ; makes it work. Thanks again Vijay for helping.

  Read the article

• Passing Data of WebView to Another Activity

  - by meygraph

  I've designed a training program and Html texts and image put into training. I want to address my html file by an activity to sent another activity. This is MainActivity /* * ListView item click listener. So we'll have the do stuff on click of * our ListItem */ listViewArticles.setOnItemClickListener(new OnItemClickListener() { public void onItemClick(AdapterView<?> parent, View view, int position, long id) { switch (position) { case 0: Intent newActivity0 = new Intent(TrickPage.this,a_Dotted_Lines.class); startActivity(newActivity0); break; case 1: Intent newActivity1 = new Intent(TrickPage.this,TutorialsPage.class); startActivity(newActivity1); break; case 2: Intent newActivity2 = new Intent(TrickPage.this,TutorialsPage.class); startActivity(newActivity2); break; case 3: Intent newActivity3 = new Intent(TrickPage.this,TutorialsPage.class); startActivity(newActivity3); break; default: // Nothing do! } and this SecondActivity (show WebView) public class a_Dotted_Lines extends Activity { private WebView webView; @SuppressLint("SetJavaScriptEnabled") @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.a_dotted_lines); // Button HOME ImageButton ImageButton_home = (ImageButton) findViewById(R.id.ImageButton_home); ImageButton_home.setOnClickListener(new View.OnClickListener() { @Override public void onClick(View v) { Intent intent = new Intent(); intent.setClass(a_Dotted_Lines.this, Main.class); startActivity(intent); overridePendingTransition(R.anim.fadein, R.anim.fadeout); } }); //Button Previous ImageButton ImageButton_previus = (ImageButton) findViewById(R.id.ImageButton_previus); ImageButton_previus.setOnClickListener(new View.OnClickListener() { @Override public void onClick(View v) { //Closing SecondScreen Activity finish(); } }); webView = (WebView) findViewById(R.id.webview_compontent); webView.getSettings().setJavaScriptEnabled(true); webView.loadUrl("file:///android_asset/html/article.htm"); } } I want Send "file:///android_asset/html/article.htm" or other addres from MainActivity Is it possible? Sorry My English is not good

  Read the article

• Trouble passing a string as a SQLite ExecSQL command

  - by Hackbrew

  I keep getting the ERROR: near "PassWord": syntax error when trying to execute the ExecSQL() statement. The command looks good in the output of the text file. In fact, I copied & pasted the command directly into SQLite Database Browser and the commend executed properly. Here's the code that's producing the error: procedure TForm1.Button1Click(Sender: TObject); var i, iFieldSize: integer; sFieldName, sFieldType, sFieldList, sExecSQL: String; names: TStringList; f1: Textfile; begin //Open Source table - Table1 has 8 fields but has only two different field types ftString and Boolean Table1.TableName:= 'PWFile'; Table1.Open; //FDConnection1.ExecSQL('drop table PWFile'); sFieldList := ''; names := TStringList.Create; for i := 0 to Table1.FieldCount - 1 do begin sFieldName := Table1.FieldDefList.FieldDefs[i].Name; sFieldType := GetEnumName(TypeInfo(TFieldType),ord(Table1.FieldDefList.FieldDefs[i].DataType)); iFieldSize := Table1.FieldDefList.FieldDefs[i].Size; if sFieldType = 'ftString' then sFieldType := 'NVARCHAR' + '(' + IntToStr(iFieldSize) + ')'; if sFieldType = 'ftBoolean' then sFieldType := 'INTEGER'; names.Add(sFieldName + ' ' + sFieldType); if sFieldList = '' then sFieldList := sFieldName + ' ' + sFieldType else sFieldList := sFieldList + ', ' + sFieldName + ' ' + sFieldType; end; ListBox1.Items.Add(sFieldList); sExecSQL := 'create table IF NOT EXISTS PWFile (' + sFieldList + ')'; // 08/18/2014 - Entered this to log the SQLite FDConnection1.ExecSQL Command to a file AssignFile(f1, 'C:\Users\Test User\Documents\SQLite_Command.txt'); Rewrite(f1); Writeln(f1, sExecSQL); { insert code here that would require a Flush before closing the file } Flush(f1); { ensures that the text was actually written to file } CloseFile(f1); FDConnection1.ExecSQL(sFieldList); Table1.Close; end; Here's the actual command that gets executed: create table IF NOT EXISTS PWFile (PassWord NVARCHAR(10), PassName NVARCHAR(10), Dept NVARCHAR(10), Active NVARCHAR(1), Admin INTEGER, Shred INTEGER, Reports INTEGER, Maintain INTEGER)

  Read the article

• CSS Hidden DIV Form Submit

  - by Michael

  Using CSS, when a link is clicked it brings up a hidden DIV that contains a form. The user will then enter information and then submit the form. I'd like the hidden DIV to remain visisble, and a 'success message' to be displayed after submission. Then the user will have the option of closing the DIV. I can't get it to work without reloading the page, which causes the DIV to become hidden again. Any ideas? <body> <a href="javascript:showDiv()" style="color: #fff;">Click Me</a> <!--POPUP--> <div id="hideshow" style="visibility:hidden;"> <div id="fade"></div> <div class="popup_block"> <div class="popup"> <a href="javascript:hideDiv()"> <img src="images/icon_close.png" class="cntrl" title="Close" /> </a> <h3>Remove Camper</h3> <form method="post" onsubmit="email.php"> <p><input name="Name" type="text" /></p> <p><input name="Submit" type="submit" value="submit" /></p> </form> <div id="status" style="display:none;">success</div> </div> </div> </div> <!--END POPUP--> <script language=javascript type='text/javascript'> function hideDiv() { if (document.getElementById) { // DOM3 = IE5, NS6 document.getElementById('hideshow').style.visibility = 'hidden'; } else { if (document.layers) { // Netscape 4 document.hideshow.visibility = 'hidden'; } else { // IE 4 document.all.hideshow.style.visibility = 'hidden'; } } } function showDiv() { if (document.getElementById) { // DOM3 = IE5, NS6 document.getElementById('hideshow').style.visibility = 'visible'; } else { if (document.layers) { // Netscape 4 document.hideshow.visibility = 'visible'; } else { // IE 4 document.all.hideshow.style.visibility = 'visible'; } } } </script> </body>

  Read the article

• Parsing XML file using a for loop

  - by Johnny Spintel

  I have been working on this program which inserts an XML file into a MYSQL database. I'm new to the whole .jar idea by inserting packages. Im having an issue with parse(), select(), and children(). Can someone inform me how I could fix this issue? Here is my stack trace and my program below: Exception in thread "main" java.lang.Error: Unresolved compilation problems: The method select(String) is undefined for the type Document The method children() is undefined for the type Element The method children() is undefined for the type Element The method children() is undefined for the type Element The method children() is undefined for the type Element at jdbc.parseXML.main(parseXML.java:28) import java.io.*; import java.sql.*; import org.jsoup.Jsoup; import org.w3c.dom.*; import javax.xml.parsers.*; public class parseXML{ public static void main(String xml) { try{ BufferedReader br = new BufferedReader(new FileReader(new File("C:\\staff.xml"))); String line; StringBuilder sb = new StringBuilder(); while((line=br.readLine())!= null){ sb.append(line.trim()); } Document doc = Jsoup.parse(line); StringBuilder queryBuilder; StringBuilder columnNames; StringBuilder values; for (Element row : doc.select("row")) { // Start the query queryBuilder = new StringBuilder("insert into customer("); columnNames = new StringBuilder(); values = new StringBuilder(); for (int x = 0; x < row.children().size(); x++) { // Append the column name and it's value columnNames.append(row.children().get(x).tagName()); values.append(row.children().get(x).text()); if (x != row.children().size() - 1) { // If this is not the last item, append a comma columnNames.append(","); values.append(","); } else { // Otherwise, add the closing paranthesis columnNames.append(")"); values.append(")"); } } // Add the column names and values to the query queryBuilder.append(columnNames); queryBuilder.append(" values("); queryBuilder.append(values); // Print the query System.out.println(queryBuilder); } }catch (Exception err) { System.out.println(" " + err.getMessage ()); } } }

  Read the article

• Best practices for displaying large number of images as thumbnails in c#

  - by andySF

  I got to a point where it's very difficult to get answers by debugging and tracing object, so i need some help. What I'm trying to do: A history form for my screen capture pet project. The history must list all images as thumbnails (ex: picasa). What I've done: I created a HistoryItem:UserControl. This history item has a few buttons, a check box, a label and a picture box. The buttons are for delete/edit/copy image. The check box is used for selecting one or more images and the label is for some info text. The picture box is getting the image from a public property that is a path and a method creates a proportional thumbnail to display it when the control has been loaded. This user control has two public events. One for deleting the image and one for bubbling the events for mouse enter and mouse leave trough all controls. For this I use EventBroadcastProvider. The bubbling is useful because wherever I move the mouse over the control, the buttons appear. The dispose method has been extended and I manually remove the events. All images are loaded by looping a xml file that contains the path of all images. For each image in this XML I create a new HitoryItem that is added (after a little coding to sort and limit the amount of images loaded) to a flow layout panel. The problem: When I lunch the history form, and the flow layout panel is populated with my HistoryItem custom control, my memory usage increases drastically.From 14Mb to around 100MB with 100 images loaded. By closing the history form and disposing whatever I could dispose and even trying to call GC.Collect() the memory increase remain. I search for any object that could not be disposed properly like an image or event but wherever I used them they are disposed. The problem seams to be from multiple sources. One is that the events for bubbling are not disposing properly, and the other is from the picture box itself. All of this i could see by commenting all the code to a limited version when only the custom control without any image processing and even events is loaded. Without the events the memory consumption is reduced by axiomatically 20%. So my real question is if this logic, flow layout panels and custom controls with picture boxes, is the best solution for displaying large amounts of images as thumbnails. Thank you!

  Read the article

• Why did File::Find finish short of completely traversing a large directory?

  - by Stan

  A directory exists with a total of 2,153,425 items (according to Windows folder Properties). It contains .jpg and .gif image files located within a few subdirectories. The task was to move the images into a different location while querying each file's name to retrieve some relevant info and store it elsewhere. The script that used File::Find finished at 20462 files. Out of curiosity I wrote a tiny recursive function to count the items which returned a count of 1,734,802. I suppose the difference can be accounted for by the fact that it didn't count folders, only files that passed the -f test. The problem itself can be solved differently by querying for file names first instead of traversing the directory. I'm just wondering what could've caused File::Find to finish at a small fraction of all files. The data is stored on an NTFS file system. Here is the meat of the script; I don't think including DBI stuff would be relevant since I reran the script with nothing but a counter in process_img() which returned the same number. find(\&process_img, $path_from); sub process_img { eval { return if ($_ eq "." or $_ eq ".."); ## Omitted querying and composing new paths for brevity. make_path("$path_to\\img\\$dir_area\\$dir_address\\$type"); copy($File::Find::name, "$path_to\\img\\$dir_area\\$dir_address\\$type\\$new_name"); }; if ($@) { print STDERR "eval barks: $@\n"; return } } And here is another method I used to count files: count_images($path_from); sub count_images { my $path = shift; opendir my $images, $path or die "died opening $path"; while (my $item = readdir $images) { next if $item eq '.' or $item eq '..'; $img_counter++ && next if -f "$path/$item"; count_images("$path/$item") if -d "$path/$item"; } closedir $images or die "died closing $path"; } print $img_counter;

  Read the article

• How can I pipe input to a Java app with Perl?

  - by user319479

  I need to write a Perl script that pipes input into a Java program. This is related to this, but that didn't help me. My issue is that the Java app doesn't get the print statements until I close the handle. What I found online was that $| needs to be set to something greater than 0, in which case newline characters will flush the buffer. This still doesn't work. This is the script: #! /usr/bin/perl -w use strict; use File::Basename; $|=1; open(TP, "| java -jar test.jar") or die "fail"; sleep(2); print TP "this is test 1\n"; print TP "this is test 2\n"; print "tests printed, waiting 5s\n"; sleep(5); print "wait over. closing handle...\n"; close TP; print "closed.\n"; print "sleeping for 5s...\n"; sleep(5); print "script finished!\n"; exit And here is a sample Java app: import java.util.Scanner; public class test{ public static void main( String[] args ){ Scanner sc = new Scanner( System.in ); int crashcount = 0; while( true ){ try{ String input = sc.nextLine(); System.out.println( ":: INPUT: " + input ); if( "bananas".equals(input) ){ break; } } catch( Exception e ){ System.out.println( ":: EXCEPTION: " + e.toString() ); crashcount++; if( crashcount == 5 ){ System.out.println( ":: Looks like stdin is broke" ); break; } } } System.out.println( ":: IT'S OVER!" ); return; } } The Java app should respond to receiving the test prints immediately, but it doesn't until the close statement in the Perl script. What am I doing wrong? Note: the fix can only be in the Perl script. The Java app can't be changed. Also, File::Basename is there because I'm using it in the real script.

  Read the article

• Custom cell in list in Flash AS3

  - by Stian Flatby

  I am no expert in Flash, and I need some quick help here, without needing to learn everything from scratch. Short story, I have to make a list where each cell contains an image, two labels, and a button. List/Cell example: img - label - label - button img - label - label - button As a Java-programmer, I have tried to quicly learn the syntax and visualness of Flash and AS3, but with no luck so far. I have fairly understood the basics of movie clips etc. I saw a tutorial on how to add a list, and add some text to it. So I dragged in a list, and in the code went list.addItem({label:"hello"}); , and that worked ofc. So i thought if I double-clicked the MC of the list, i would get to tweak some things. In there I have been wandering around different halls of cell-renderers etc. I have now come to the point that I entered the CellRenderer_skinUp or something, and customized it to my liking. When this was done, I expected i could use list.addItem(); and get an empty "version" of my cell, with the img, labels and the button. But AS3 expects an input in addItem. From my object-oriented view, I am thinking that i have to create an object of the cell i have made, but i have no luck reaching it.. I tried to go var test:CellRenderer = list.listItem; list.addItem(test); ..But with no luck. This is just for funsies, but I really want to make this work, however not so much that I am willing to read up on ALOT of Flash and AS3. I felt that I was closing in on the prize, but the compiler expected a semicolon after the variable (list.addItem({test:something});). Note: If possible, I do NOT want this: list.addItem({image:"src",label:"text",label"text",button:"text"}); Well.. It actually is what I want, but I would really like to custom-draw everything. Does anyone get what I am trying to do, and has any answers for me? Am I approaching this the wrong way? I have searched the interwebs for custom list-cells, but with no luck. Please, any guiding here is appreciated! Sti

  Read the article

• How to populate the span tags between specific tags.

  - by Rachel

  I want to populate span tags for all text nodes between the self closing tags s1 and s2 having the same id.If the transformation of the input to the output form requires the list of ids of the s1 , s2 tag pairs say 1, 2 etc i can assume that it is in place in any form if required.The input can have any structure and not exactly the same as seen in the sample input. It can have any number of s1, s2 tag pairs but each pair will have a unique id. Hope i am clear. How can this be achieved using XSL? Input: <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>This is my title</title> </head> <body> <h1 align="center">This <s1 id="1" />is my <s2 id="1" />heading</h1> <p> Sample content <s1 id="2" />Some text here. Some content here. </p> <p> Here you <s2 id="2" />go. </p> </body> </html> Desired output: <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>This is my title</title> </head> <body> <h1 align="center">This <span id="1">is my </span>heading</h1> <p> Sample content <span id="2">Some text here. Some content here.</span> </p> <p> <span id="2">Here you </span>go. </p> </body> </html>

  Read the article

• Directly Jump to another C++ function

  - by maligree

  I'm porting a small academic OS from TriCore to ARM Cortex (Thumb-2 instruction set). For the scheduler to work, I sometimes need to JUMP directly to another function without modifying the stack nor the link register. On TriCore (or, rather, on tricore-g++), this wrapper template (for any three-argument-function) works: template< class A1, class A2, class A3 > inline void __attribute__((always_inline)) JUMP3( void (*func)( A1, A2, A3), A1 a1, A2 a2, A3 a3 ) { typedef void (* __attribute__((interrupt_handler)) Jump3)( A1, A2, A3); ( (Jump3)func )( a1, a2, a3 ); } //example for using the template: JUMP3( superDispatch, this, me, next ); This would generate the assembler instruction J (a.k.a. JUMP) instead of CALL, leaving the stack and CSAs unchanged when jumping to the (otherwise normal) C++ function superDispatch(SchedulerImplementation* obj, Task::Id from, Task::Id to). Now I need an equivalent behaviour on ARM Cortex (or, rather, for arm-none-linux-gnueabi-g++), i.e. generate a B (a.k.a. BRANCH) instruction instead of BLX (a.k.a. BRANCH with link and exchange). But there is no interrupt_handler attribute for arm-g++ and I could not find any equivalent attribute. So I tried to resort to asm volatile and writing the asm code directly: template< class A1, class A2, class A3 > inline void __attribute__((always_inline)) JUMP3( void (*func)( A1, A2, A3), A1 a1, A2 a2, A3 a3 ) { asm volatile ( "mov.w r0, %1;" "mov.w r1, %2;" "mov.w r2, %3;" "b %0;" : : "r"(func), "r"(a1), "r"(a2), "r"(a3) : "r0", "r1", "r2" ); } So far, so good, in my theory, at least. Thumb-2 requires function arguments to be passed in the registers, i.e. r0..r2 in this case, so it should work. But then the linker dies with undefined reference to `r6' on the closing bracket of the asm statement ... and I don't know what to make of it. OK, I'm not the expert in C++, and the asm syntax is not very straightforward... so has anybody got a hint for me? A hint to the correct __attribute__ for arm-g++ would be one way, a hint to fix the asm code would be another. Another way maybe would be to tell the compiler that a1..a3 should already be in the registers r0..r2 when the asm statement is entered (I looked into that a bit, but did not find any hint).

  Read the article

• How to close all, or only some, tabs in Safari using AppleScript?

  - by Form

  I have made a very simple AppleScript to close all tabs in Safari. The problem is, it works, but not completely. The problem is that only a couple of tabs are closed. Here's the code: tell application "Safari" repeat with aWindow in windows repeat with aTab in tabs of aWindow if [some condition is encountered] then aTab close end if end repeat end repeat end tell I've also tried this script: tell application "Safari" repeat with i from 0 to the number of items in windows set aWindow to item i of windows repeat with j from 0 to the number of tabs in aWindow set aTab to item j of tabs of aWindow if [some condition is encountered] then aTab close end if end repeat end repeat end tell ... but it does not work either (same behavior). I tried that on my system (MacBook Pro jan 2008), as well as on a Mac Pro G5 under Tiger and the script fails on both, albeit with a much less descriptive error on Tiger. Running the script a few times closes a few tab each time until none is left, but always fails with the same error after closing a few tabs. Under Leopard I get an out of bounds error. Since I am using fast enumeration (not using "repeat from 0 to number of items in windows") I don't see how I can get an out of bounds error with this... My goal is to use the Cocoa Scripting Bridge to close tabs in Safari from my Objective-C Cocoa application but the Scripting Bridge fails in the same manner. The non-deletable tabs show as NULL in the Xcode debugger, while the other tabs are valid objects from which I can get values back (such as their title). In fact I tried with the Scripting Bridge first then told myself why not try this directly in AppleScript and I was surprised to see the same results. I must have a glaring omission or something in there... (seems like a bug in Safari AppleScript support to me... :S) I've used repeat loops and Obj-C 2.0 fast enumeration to iterate through collections before with zero problems, so I really don't see what's wrong here. Anyone can help? Thanks in advance!

  Read the article

• How can I store large amount of data from a database to XML (speed problem, part three)?

  - by Andrija

  After getting some responses, the current situation is that I'm using this tip: http://www.ibm.com/developerworks/xml/library/x-tipbigdoc5.html (Listing 1. Turning ResultSets into XML), and XMLWriter for Java from http://www.megginson.com/downloads/ . Basically, it reads date from the database and writes them to a file as characters, using column names to create opening and closing tags. While doing so, I need to make two changes to the input stream, namely to the dates and numbers. // Iterate over the set while (rs.next()) { w.startElement("row"); for (int i = 0; i < count; i++) { Object ob = rs.getObject(i + 1); if (rs.wasNull()) { ob = null; } String colName = meta.getColumnLabel(i + 1); if (ob != null ) { if (ob instanceof Timestamp) { w.dataElement(colName, Util.formatDate((Timestamp)ob, dateFormat)); } else if (ob instanceof BigDecimal){ w.dataElement(colName, Util.transformToHTML(new Integer(((BigDecimal)ob).intValue()))); } else { w.dataElement(colName, ob.toString()); } } else { w.emptyElement(colName); } } w.endElement("row"); } The SQL that gets the results has the to_number command (e.g. to_number(sif.ID) ID ) and the to_date command (e.g. TO_DATE (sif.datum_do, 'DD.MM.RRRR') datum_do). The problems are that the returning date is a timestamp, meaning I don't get 14.02.2010 but rather 14.02.2010 00:00:000 so I have to format it to the dd.mm.yyyy format. The second problem are the numbers; for some reason, they are in database as varchar2 and can have leading zeroes that need to be stripped; I'm guessing I could do that in my SQL with the trim function so the Util.transformToHTML is unnecessary (for clarification, here's the method): public static String transformToHTML(Integer number) { String result = ""; try { result = number.toString(); } catch (Exception e) {} return result; } What I'd like to know is a) Can I get the date in the format I want and skip additional processing thus shortening the processing time? b) Is there a better way to do this? We're talking about XML files that are in the 50 MB - 250 MB filesize category.

  Read the article

• How to close a jquery dialog box when a submit button is clicked(Submit button is residing inside the dialog box)

  - by user1268313

  i have struts2 form inside a jquery dialog box, when i submit my form inside that dialog box my Struts2 action is performing but that pop up jquery dialog box is not closing. How can i close that dialog box when![enter image description here][1] i submit my form? <table> <tr> <td> <td align="center" > <sj:head jqueryui="true" jquerytheme="cupertino" /> <sj:dialog id="mybuttondialog" autoOpen="false" showEffect="fadeIn" hideEffect="fadeOut" modal="true" title="Rename" > <s:form action="EditDayActionUserTemplate" id="formId323"> <table style="height:48px;width: 100%;" cellpadding="0" cellspacing="0" border="0"> <tr> <td colspan="2" align="center"> <input type="hidden" name="dayId" value="<%=daycont%>"/> <input type="hidden" name="workoutId" value="<%=trid%>"/> </td> </tr> <tr> <td width="50%" align="right"><font size="6px">Date</font></td> <td width="50%"> <sj:datepicker id="datghfe4" name="date" value="%{#parameters['date']}" label="Select Date" appendText=" (dd.MM.yy)" displayFormat="dd.M.yy"/></td> </tr> <tr> <td>&nbsp;</td> <td align="right"><sj:submit formIds="formId323" id="sdfdss3" button="true" value="Rename" targets="rightmiddiv"></sj:submit></td> </tr> </table> </s:form> </sj:dialog> <sj:submit openDialog="mybuttondialog" value="Rename" button="true" /> </td> </tr> </table>

  Read the article

< Previous Page | 66 67 68 69 70 71 72 73 74 75 76 77  | Next Page >