Search Results

Search found 4590 results on 184 pages for 'direction'.

Page 70/184 | < Previous Page | 66 67 68 69 70 71 72 73 74 75 76 77  | Next Page >

• RHEL raw device (over VMware RDM) performance issues

  - by jifa

  I'm running RHEL 5.3 over vSphere 4.0U1. I configured multiple LUNs on my NetApp (Fibre) storage, and added the RDM on two (Linux) VMs, using the Paravirtual SCSI adapter. One LUN is 100GB in size, successfully mapped to /dev/sdb on both VMs, 5 more are 500MB in size (mapped to /dev/sd{c-g}. I also created one partition per device. I have encountered two issues: First, writing directly to /dev/sdb1 gives me ~50MB/s, while any of the /dev/sd{c-g}1 gives me ~9MB/s. There is no difference in configuration of the LUNs apart from their size. I am wondering what causes this but this is not my main problem, as I would settle for 9 MB/s. I created raw devices using udev pretty straightforwardly: ACTION=="add", KERNEL=="sdb1", RUN+="/bin/raw /dev/raw/raw1 %N" per device Writing to any of the new raw devices dramatically slows down performance to just over 900KB/s. Can anyone point me in a helpful direction? Thanks in advance, -- jifa

  Read the article

• Issue with Capslock key on Laptop

  - by Mr New

  For some reason my laptop has a mind of its own and the Caps Lock tends to come on whenever it feels like it. I thought it was an software issue from that reasoning, but I later cleared the OS and then reinstalled it hoping to fix the problem, but it didn't. Not only does it do that it also comes on and off whenever the letters A, S, and left shift key are pushed. So I assummed it was a keyboard issue and that the keyboard needs to be replaced, but it has one of those touch pad cap lock buttons also, because even when I press that button it tends to not react. So how can that be fixed with a keyboard replacement or is that connected still? EDIT - I followed the direction with the following code in notepad and it didn't do the job: Windows Registry Editor Version 5.00 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Keyboard Layout] “Scancode Map”=hex:00000000 00000000 0200000000 00003A00 00000000

  Read the article

• Netgear Router missing Wireless Configuration Menu Link

  - by ccisystems

  I have a Netgear WiFi router DG834G v3. On it it says it's a WiFi, ADSL 2+ modem, switch, etc. There is an antenna on the back and a WiFi indicator on the front. However, when I connect to it via the web interface, the wireless setup link is missing from the menu. The top label indicates it is a DG834 (without G). I have received it from a friend and was really looking forward to using it but I really need the WiFi part. I looked on Netgear's site as I thought someone must have uploaded the wrong firmware for the device sometime - so I upgraded to the latest firmware, but it still says it's NOT a 'G' device and the wireless menu is nowhere to be found. I'd appreciate a push in the right direction as to what I could do. Is it possible that the WiFi chip is broken or something and the device does not detect it and the firmware reverts the device to a different version?

  Read the article

• Acrobat 8 on Windows 7 64-bit

  - by user66822

  Here's the situation I'm in. I have Acrobat 8 on Wows 7 (64-bit) and anytime I create PDFs any numbers on the page I'm PDFing come through as garbage. Everything else on the page comes out fine, just the numbers are messed up. They appear as random symbols. I've uninstalled, reinstalled. Applied all updates, not applied updates, nothing seems to help. Mayube I'm a bad searcher, can't put in the right search terms, but I can't find anything that seems to point me in a direction on this. ANy ideas?

  Read the article

• Is there a plugin for [Path] Finder to browse zip-archives as folders?

  - by Andrei

  Hi, I am migrating from Windows to OS X and looking for a good way to browse zip, rar etc. archives. Ideally, I need a plugin for Finder which will allow me to open archives as folders. Is there one, or any other suitable solution? Preferably free Update As I understand, most of Mac users are using Path Finder app for file management. It is an awesome program, however surprisingly it also doesn't have such functionality. I guess, the problem is in the way of thinking – my Windows-thinking is not applicable to Mac. Here are some threads for other former Windows users to push Cocoatech in a right direction: http://forum.cocoatech.com/showthread.php?t=2883 http://forum.cocoatech.com/showthread.php?t=5167

  Read the article

• Fast, reliable data transfers from/to China

  - by Nils

  We are a small company and we will need to transfer rather large amounts of data (10GB+ each time) between Europe and China in the near future. As many may have experienced, Internet connections to or from China can be rather unreliable and slow at times without any apparent reason. For example, while sending data to China via FTP generally works well, it can be painfully slow in the other direction. Currently, we are investigating new ways to have high transfer rates in both directions. So far we have tried: FTP (see above) FTP over VPN services (generally slower than direct connections) F2F (like Retroshare or Freenet - slow!!) Aspera (fast but expensive!) BitTorrent (unreachable end nodes, b/c of firewalls which we must not configure) We would like to try: Cloud storage (e.g. Amazon S3, Google Storage) - are those services always and reliably reachable from inside China? Point-to-Point VPN (currently not possible, b/c of the network, see above) I'd be especially grateful to hear from people who have already dealt with this kind of problem before.

  Read the article

• CA ArcServe r11.1 - have to switch Tape Drive Offline then Online to finish backup

  - by Richard

  Ill keep it brief, I have an HP Ultrium 1 in a server currently running CA ArcServe r11.1. I have 5 daily backup tapes, each of which are new. 3 of the 5 work fine without intervention but 2 of them stop at varying points through the backup asking for a new tape, even though that tape is not full. The way I have found around this is to switch the tape drive offline for 10 minutes then switch it back online, whilst the backup is still running. Has anyone ever seen this before? If so, any ideas how to permanently fix this. If all else fails just some pointers in the right direction. Thanks

  Read the article

• Unable to ping remote server Nagios

  - by williamsowen

  We've recently set up Nagios on one of our Amazon EC2 instances to act as a monitoring server to our other instances. nrpe was installed on our staging server stager and appears to be working fine: monitoring_server~: /usr/lib/nagios/plugins/check_nrpe -H xx.xx.xx.xx -p 5666 NRPE v2.12 The issue is - when viewing the remote server stager within the Nagios admin screen - it appears to be 'DOWN'. The check_ping command reveals: monitoring_server~: /usr/lib/nagios/plugins/check_ping -H 'xx.xx.xx.xx' -w 5000,100% -c 5000,100% -p 1 PING CRITICAL - Packet loss = 100%|rta=5000.000000ms;5000.000000;5000.000000;0.000000 pl=100%;100;100;0 Can anyone provide some direction on how to get this working? Not sure what else to do

  Read the article

• Windows 7 can't copy file - Error 0x800700DF: The file size exceeds the limit allowed and cannot be saved

  - by JJGroover

  Any attempt to copy files larger than about 40 MB from a network share (a SAN running open filer / Samba) to my local machine running Windows 7 always results in the following error and the copy fails: Error 0x800700DF: The file size exceeds the limit allowed and cannot be saved. I've tried copying to my C: drive and a USB drive with the same results. Smaller files copy just fine. Clearly 40 MB is not that big of a file so I'm assuming it is some buggy interaction between windows 7 and Samba perhaps. Google has so far turned up nothing. Can anyone point me in the right direction?

  Read the article

• Word 2007 "Out of Memory or Disk Space" Error on launch.

  - by Adam

  Word 2007 is installed on a Vista Home Premium machine and whenever it starts up it opens what appears to be a dynamic installer to do something and then throws up the "Out of Memory or Disk Space" error. Word 2007 never completes starting up. Reinstalling Word hasn't helped and if I can avoid reinstalling Windows until Windows 7 is released and get Word working in the mean time, that would be ideal. I've been looking around for a solution, once of which seemed to point to a problem with the user account. I created a second user on the machine and Word still had the same problem. The other solution that seems possible is a corrupted normal.dot/normal.dotm file. However, even in the location it should be, I can't seem to find it. Am I going in the right direction with this? Is there another solution I haven't come across that will fix this? If it is possible that renaming normal.dot/normal.dotm how can I find it?

  Read the article

• Eventlog entry for allowed connection in Windows Firewall

  - by Jaap

  I was seeing a lot of entries in the eventlog: The Windows Filtering Platform has permitted a connection. Application Information: Process ID: 4 Application Name: System Network Information: Direction: Inbound Source Address: 10.xxx.xxx.xxx Source Port: 80 Destination Address: 10.xxx.xxx.xxx Destination Port: 31773 Protocol: 6 Filter Information: Filter Run-Time ID: 67903 Layer Name: Receive/Accept Layer Run-Time ID: 44 We have a loadbalancer which checks every second to see if the application is still running (a health check). The logs contain large amounts of this kind of entries, which makes the Event Viewer slow and it's difficult to find the more interesting logs. How do I make sure these messages don't end up in the event logs?

  Read the article

• How do I set up multiple Magento sites from the same domain?

  - by Jenx222

  I have a Magento installation with two sites, each with a shop and a view. I have an EU store in one site and a NON-EU store in the other. Both sites use a different currency. At present both of these websites are located on the same domain. I have been able to switch between stores using cookies but this seems to cause an inherit amount of problems. Every time a user creates an account on the non-default shop they get a blank error message. They also get a blank error message when they log in. Can anyone point me in the right direction? I need to use a different currency for each store but they all need to be on the same domain.

  Read the article

• sp_releaseapplock timeout expired cause?

  - by Darian Miller

  I've been using a combination of sp_getapplock and sp_releaseapplock for some custom application locking purposes for years now with success and just the last few days I've started to get some timeout expired errors on a sp_releaseapplock which is a bit puzzling. When listing the current locks, there's less than a dozen of these active, and the rest of the dedicated server is way underutilized at the moment (less than 100 batches/sec with a mutli-processor, 32GB Ram, higher end machine.) Is there a specific resource to be monitored that may point me in the right direction for determing why such a lightweight operation is timing out? This is called within a stored proc with a timeout of 120 seconds which seems to be amazingly long for this operation to timeout on. SQL 2000 SP4 running on Windows 2003 Server. TSQL used (@pLockUniqueName is VarChar(255)) EXEC @pLockSuccess = sp_getapplock @pLockUniqueName, 'Exclusive', 'Session', 0 EXEC @pUnLockSuccess = sp_releaseapplock @pLockUniqueName, 'Session' Thanks, Darian

  Read the article

• Purpose of JBoss tables

  - by Rich

  Hi Can anyone point me in the direction of some documentation (or provide the information here) about the following tables, created by JBoss 5.1.0 when it starts up? I know what they are for at a high level, and know why they are there, but I could do with some lower-level documentation about each table's purpose. The tables are: hilosequences timers jbm_counter jbm_dual jbm_id_cache jbm_msg jbm_msg_ref jbm_postoffice jbm_role jbm_tx jbm_user I know that the first two are associated with uuid-key-generator and the EJB Timer Service respectively, while the rest are associated with JBoss Messaging. What I want to know is something along the lines of "jmg_msg stores each message when it is created...", that kind of thing. I wasn't sure where to ask this question, ServerFault or StackOverflow, but I decided it wasn't programming related so thought I should put it here - I hope that's ok! Thanks Rich

  Read the article

• Moving FederatedEmail/SystemMailbox from One Store to Another - Exchange 2010

  - by ThaKidd

  Hello all. Just upgraded from Exchange 2003 to 2010. Somehow, I have two mailbox databases on my single Exchange 2010 server. One database contains all of the mailboxes I had moved from the 2003 exchange server; the other contains two SystemMailboxes and one FederatedEmail box. I am just starting to get a grasp on the commands used in the EMS. I was wondering if someone could point me in the right direction to move these three "system" mailboxes into my actual mailbox database so I can eliminate the second database. Just trying to sure up this one server before I role out my backup Exchange server. Thanks in advance! Your help and ideas are greatly appreciated as I try to make this setup as simple as possible.

  Read the article

• have list of emails to be deleted from sheet A col D [on hold]

  - by Peta

  Thank you for your comments guys & now that CharlieRB has suggested "Match entire cell contents" I'll give it a better go. No I do not expect people to do my work for me & I'm sorry if it came over that way - just didn't know where to start. Would love some help please, I've limited VBA & function knowledge & I'm not sure where to start. If someone can point me in the right direction it would be appreciated. I have a list of email addresses on sheet "B" col A (but I could put them on sheet A if it would make it easier / faster) that I want deleted from sheet "A" col D (may be 2 or more occurences of the same email). I can't just record a find & delete macro and edit because for example [email protected] will also pick up [email protected] which I may not want deleted. thanks very much Peta

  Read the article

• DOS Batch file to find "new" files by date

  - by Todd McArthur

  My PC has entered an infinite BSOD loop - but I do have access to a safe-mode command prompt. I'm trying to get an idea of "what changed" that might have triggered this. e.g. I might have gotten a virus, or an app update went belly up. I'd like to thus see which files were created/modified in the last few days/week or at least the *.exe, *.dll, *.com, *.bat etc. I thought I was ok with my Batch-fu but I'm stumped on how to write a quick batch file/command that would list the files for me. REM This will find the files, but the results are all muddled REM all EXE files, reverse sort by date, recursively through sub-directories dir *.exe /O-D /S What I'd really like is to find all (executable filetypes) that were created/modified in the last 3-7 days. Can anyone point me in the right direction?

  Read the article

• Reverse DNS for two ADs in the same subnet

  - by SpacemanSpiff

  I currently have two separate AD forests that exist within the same subnet. The two forests have independent copies of the reverse lookup zone for that subnet. Example: Domain A DC1: 10.1.1.1/24 Domain A DC2: 10.1.1.2/24 Domain A AppServer1:10.1.1.3/24 Domain B DC1: 10.1.1.11/24 Domain B DC2: 10.1.1.12/24 Domain B Appserver1:10.1.1.13/24 What I'm after, is a configuration that allows this reverse zone to be shared between them so that both sets of DNS servers can make updates to the zone. This kind of thing is a little far from my everday work, so a kick in the right direction is a welcome suggestion as well. Decoupling one AD into new segments is a possibility I'm open to but would like to avoid if possible. If there is a DNS related solution I'd prefer that.

  Read the article

• wamp - Changing PHP version stops server running

  - by James Connor

  I downloaded wamp which works (green icon). However I need to test a site locally in Joomla 1.5 which caused errors when using php 5.3 I believe I need a PHP version lower then this i.e 5.2.x To do this I have gone through PHP - Version - Get More.. and installed a older PHP version. However when I start this PHP version the icon stays on an orange colour and going in localhost doesn't work. I haven't used wamp before so my knowledge of it is limited. If anyone could point me in the right direction it would be greatly appreciated, Regards.

  Read the article

• Error from DNS validation service: RFC821 4.3

  - by ferdi

  So I've managed to setup bind9 and a mail server, but it seems there is something wrong. I don't quite under stand this error: The configuration of your mail servers and your DNS are not ok! The report of the test is: mail.domain.com. - mail.domain.com - 208.xxx.xxx.xxx - lisa.domain.com Spam recognition software and RFC821 4.3 (also RFC2821 4.3.1) state that the hostname given in the SMTP greeting MUST have an A record pointing back to the same server. Can anyone explain this to me in a bit more detail, and maybe point me in a direction to solve this?

  Read the article

• Remote desktop from internet to windows 7 box via linksys router

  - by larryq

  Hi everyone, I have a linksys wrt54g router and a windows 7 box at home I'd like to be able to remote desktop into from work. Would it be possible for someone to point me in the right direction on what I need to configure to get this working, both on the router and on the win 7 box? I'm sure there are a lot of little steps involved. Ideally I'd like to set it up so that only my work IP address can get through to the win 7 machine. Thanks very much for any pointers and links!

  Read the article

• Best way to block a country by IP address?

  - by George Edison

  I have a website that needs to block a particular country based on IP address. I am more than aware that IP-based blocking is not a foolproof method for blocking visitors, but it is a necessary step in the right direction. Since I'm using PHP, what I would do is use a GeoIP database like geoplugin.net. However, I'm curious to know if there's a better way of doing this. The website is on a shared webserver (I don't have root access) and it is running Apache on centOS. I guess my question is "can an .htaccess file be configured to block by IP using an external source to lookup IP addresses."

  Read the article

• Monitor a log file on Linux and send each line to another program

  - by mlambie

  I run an apt-cacher-ng server on Ubuntu Linux which writes logs in the following format: 1299745593|O|149406|XXX.XXX.XXX.XXX|uburep/pool/main/t/tiff/libtiff4_3.9.2-2ubuntu0.4_amd64.deb 1299745593|O|10154976|XXX.XXX.XXX.XXX|uburep/pool/main/l/linux-firmware/linux-firmware_1.34.4_all.deb 1299748529|O|39368|XXX.XXX.XXX.XXX|uburep/pool/main/n/nagios-nrpe/nagios-nrpe-server_2.12-4ubuntu1_amd64.deb 1300155440|O|680100|XXX.XXX.XXX.XXX|uburep/pool/main/t/tzdata/tzdata_2011c-0ubuntu0.10.04_all.deb It shows the timestamp, direction (in or out), byte count, IP and filename. Every time a line is written to it, I'd like to also send that line to another program. I will have this program insert the line into a database so that I can crunch some statistics about how much bandwidth we're saving through operating a caching server. I do not want to cat the log file every X minutes (via cron) looking for new entries as it'd be somewhat computationally uneconomical. Instead I'd prefer to have a daemon monitor the log, and when a change is detected, each line is sent to my database-insertion script. Will swatch achieve this, or are there better options?

  Read the article

• txt file descriptor in lsof

  - by wfaulk

  In my experience, files that have the file descriptor of txt in lsof output are the executable file itself and shared objects. The lsof man page says that it means "program text (code and data)". While debugging a problem, I found a large number of data files (specifically, ElasticSearch database index files) that lsof reported as txt. These are definitely not executable files. The process was ElasticSearch itself, which is a java process, if that helps point someone in the right direction. I want to understand how this process is opening and using these files that gets it to be reported in this way. I'm trying to understand some memory utilization, and I suspect that these open files are related to some metrics I'm seeing in some way. The system is Solaris 10 x86.

  Read the article

• Rsync and Windows 7

  - by Nate

  Can someone give me any tips on setting up some sort of Rsync server/client on Windows 7 to run rsync between both my web hosting server, and a backup server that I have running Ubuntu? I've tried setting it up with this tutorial: http://www.youtube.com/watch?v=CvwdkZLNtnA Using copssh, and cwrsync. Ran into all sorts of troubles, including not being able to get cwrsync to run (it installs properly, but never starts up), and copssh not generating the keys at all. The guy was running Windows Server 2003, though, so I'm guessing the problems could just be because I'm running Windows 7. I've been trying to set it up with my Windows machine being the rsync server, and then Ubuntu and my webhosting VPS as the clients, but I realize it may be easier (and make more sense) to just setup the rsync server on Ubuntu, and then an rsync client on Windows 7? Can anyone point me in the right direction? I'm thinking of using this guide: http://www.gaztronics.net/rsync.php It seems a bit outdated, though.

  Read the article

< Previous Page | 66 67 68 69 70 71 72 73 74 75 76 77  | Next Page >