Search Results

Search found 1999 results on 80 pages for 'dvd authoring'.

Page 70/80 | < Previous Page | 66 67 68 69 70 71 72 73 74 75 76 77  | Next Page >

  • Laptop hangs on POST and does not finish except on rare occasions

    - by user1049697
    I have an old Toshiba Satellite A100 laptop that hangs on POST when I try to start it. On rare occasions it does finish the POST and boots Windows successfully, but most times it just finishes it partially and continues to hang. I can enter the BIOS though when it has frozen, but I have to open the DVD-drive first for some reason. The keyboard is not quite right either, and I can't navigate the BIOS properly because the arrow keys doesn't work. I tried an external keyboard, but the problem persisted. I have tried to remove the memory, hard drive, and battery to see if any of these were the problem, but it did not solve it. The one logical thing left to do would be to remove the CMOS battery, but the "brilliant" engineers at Toshiba have place it such that a complete disassembly of the machine is necessary. What this all boils down to is basically the question of whether I can "save" this machine and get it to boot properly, or if I should just send it off to recycling. I suspect it might need costly repairs, but I can't bring myself to throw it away before I have made sure it's completely dead.

    Read the article

  • OpenSolaris livecd, NForce NIC driver, and NTFS USB mounting. Oh My!

    - by Jake Wharton
    I'm attempting to install OpenSolaris 2009.06 on my server. Before I do I would like to test that everything works and am running in to problems. It has an Abit AN-M2 motherboard with an NForce chipset. The driver config utility says that I need a third-party driver and links me to http://homepage2.nifty.com/mrym3/taiyodo/eng/. Scrolling to the bottom, I have downloaded both tgzs just in case. Now the fun part: The only way to get this on to the computer is via a USB drive since I can't access the network. Also, install CD in the drive otherwise I'd just burn them to DVD. Since my USB key is NTFS formatted I cannot mount it since the install CD seems to be lacking NTFS drivers which require more downloaded packages. What should I do? The server will simply be a dumb NAS and I know that there exists other OpenSolaris-based flavors such as Nexenta but from what I read the stock install is likely the best. If this is not the case and pursuing a different flavor is required or better I will also accept that as an answer (but please don't jump straight to it).

    Read the article

  • What to do with a broken OS X install disc?

    - by slhck
    First things first: I don't appreciate software piracy and I really want to spend money on software that I use and that I work and make money with. I don't want this question closed just because I consider downloading software, I only want honest opinions and alternatives. Here we go: So I have my OS X Snow Leopard Upgrade DVD, but it's horribly scratched and won't boot anymore. It endlessly loads and at some point I have to force pull it out of the disc slot. How can I reset my Mac then? Can I take my original disk to an Apple Store and ask them for a replacement? Will they believe me, even if I don't have the receipt anymore? Would owning the original disk make it okay for me to look somewhere on the internet and download it? I don't even know if that will work without hassles. Could I try to read the disk to an image with some error correction methods? Maybe during boot it can't read some files, but some other program can? Is there any other way of resetting the Mac? Mine's now over 3 years old an I seem to have misplaced my original discs that had 10.4 on it. Or should I just buy a new 10.6 upgrade disk? (Which is not really what I want to do) Answers and opinions would be much appreciated.

    Read the article

  • Update BIOS on Sun Fire X4150 server

    - by Massimo
    I have some Sun Fire X4150 servers with a very old BIOS release (1ADQW015), which seems to have some compatibility problems with WMware ESX Server 3.5 and Windows 2008 R2 virtual machines; so I want to update the BIOS on them. The problem: according to this page, if your servers run ELOM (mine do), you first need to update to the latest ELOM release, then to the interim transition release, then finally you can update to the latest one. Ok, I'm willing to do that... but it looks like Sun (now Oracle) will happily let you download the latest firmware DVD (3.3.0), but it will not let you download the transition release (2.0) if you don't have a support contract. Well, I actuall don't care at all about the servers' management controllers (we don't even use them), so upgrading from ELOM to ILOM is totally irrelevant to me; but I need to update the servers' BIOS. So my question is: can I update the servers' BIOS to the latest version without doing the full ELOM-to-ILOM migration, or will this not work (or even make the servers unusable)? Do BIOS versions and SP ones need to be matched, or can one be updated without bothering with the other? Bonus question: if this whole ELOM-to-ILOM thing actually is needed in order to update the BIOS, can that 2.0 CD-ROM be obtained without having a support contract with Sun/Oracle (which we are definitely not going to sign, being that quite old hardware)? Update: I tried upgrading only the BIOS on one of the servers, and it didn't boot anymore. So it really looks like a full firmware upgrade is needed, and the management controller and BIOS versions should be kept in sync. So... where can I find that *&!£%$% 2.0 CD-ROM? Or at least the transition firmware that can be found on it?

    Read the article

  • Are These Parts compatible?

    - by ell
    I have never assembled a PC before, although I have taken an old one apart and replaced a few parts in others here and there so I have (very) limited experience. I have been looking to make a pc and here are the parts I might buy: Foxconn P45AL Intel P45 (Socket 775) DDR2 Motherboard (with onboard sound I believe) Gigabyte GeForce GTX 460 OC 768MB GDDR5 PCI-Express Graphics Card Already have 2 1gb sticks of dual channel DDR2 memory Intel Core 2 Quad Q8400 LGA775 'Yorkfield' 2.66GHz 4MB-cache Processor Samsung SpinPoint F3 1TB SATA-II 32MB Cache Hard Drive Antec Dark Fleet Series DF10 Gaming Enclosure – Black I already have monitor, mouse, keyboard and DVD/CD drive Akasa Freedom Power 1000W Modular Power Supply I have never done this before so feel free to laugh at me for getting something obvious wrong, forgetting a vital component etc. but is all of this compatible? And have I gone overkill on the PSU, if so, please recommend one. Thanks in advance, ell. EDIT: Added PSU which I forgot to mention EDIT: I would be using this to surf the internet, write e-mails, chat, word process, play games such as team fortress 2 & spring rts (at highest graphics hopefully), some 3d modelling in blender, some opengl programming, and image editing in GIMP.

    Read the article

  • Write Fedora.iso to USB and boot it from a Macbook

    - by MTilsted
    I have an .iso image of the full Fedora 16 install (Downloaded from http://fedoraproject.org/en/get-fedora-options#formats as "Fedora 16 DVD") and the question now is: How do I write it on a USB stick, so I can install it on my Mac book? I tried using DD as the install guide said, and that gave me a USB stick which can boot from my PC. But it can't boot from the Mac (The Mac start menu don't show it as a boot option). Edit: I downloaded a live install image, and did this (SSD is my USB 4GB thing) /sbin/mkdosfs -F 32 -n usbdisk /dev/dev/sdd1 sudo livecd-iso-to-disk --format --reset-mbr --efi /tmp/download/Fedora-16-i686-Live-KDE.iso /dev/sdd1 And this produced an image which can boot on my pc but not on my mac. This seems to indicate that the --efi is not working, because if it really was EFI it would not boot on a normal pc, would it? I then tried this: (Difference being that I write the image directory to /dev/sdd instead of /dev/sdd1) but this still will not boot on the Mac (it newer shows up at the startup screen on the Mac). sudo livecd-iso-to-disk --format --reset-mbr --efi /tmp/download/Fedora- PS: My host Linux is Fedora 13.

    Read the article

  • Weird mouse behaviour. Debian wheezy

    - by DevNoob
    When I move my mouse slowly over the desktop the pointer jumps often a few pixels (one or two) in the opposite direction of which I move my mouse. Horribly when trying to set the cursor around some semicolons in eclipse. I guess this is the result of a wrong set resolution of it. I suppose this is because the mouse was set initially really fast and even if I do xset 1/2 3, the mouse is just to fast and unprecise for me. It aready tried to configure the xorg.conf like this: Section "InputDevice" Identifier "Configured Mouse" Driver "mouse" Option "Device" "/dev/mouse" Option "Protocol" "Auto" Option "Name" "Logitech G3" Option "Resolution" "2000" EndSection But with no effect. Maybe because there is no /dev/mouse. This ist the content of dev. Maybe you can tell me which one is the mouse. autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency disk dvd dvdrw fd fd0 full fuse fw0 hidraw0 hidraw1 hpet input kmsg log loop0 loop1 loop2 loop3 loop4 loop5 loop6 loop7 loop-control MAKEDEV mapper mcelog mem net network_latency network_throughput null nvidia0 nvidiactl oldmem port ppp printer psaux ptmx pts random rfkill root rtc rtc0 sda sda1 sda2 sda3 sda5 sda6 sda7 sda8 sdb sdb1 sg0 sg1 sg2 shm snapshot snd sndstat sr0 stderr stdin stdout tty tty0 tty1 tty10 tty11 tty12 tty13 tty14 tty15 tty16 tty17 tty18 tty19 tty2 tty20 tty21 tty22 tty23 tty24 tty25 tty26 tty27 tty28 tty29 tty3 tty30 tty31 tty32 tty33 tty34 tty35 tty36 tty37 tty38 tty39 tty4 tty40 tty41 tty42 tty43 tty44 tty45 tty46 tty47 tty48 tty49 tty5 tty50 tty51 tty52 tty53 tty54 tty55 tty56 tty57 tty58 tty59 tty6 tty60 tty61 tty62 tty63 tty7 tty8 tty9 ttyS0 ttyS1 ttyS2 ttyS3 uinput urandom usb vcs vcs1 vcs2 vcs3 vcs4 vcs5 vcs6 vcs7 vcsa vcsa1 vcsa2 vcsa3 vcsa4 vcsa5 vcsa6 vcsa7 vga_arbiter vmci vmmon vmnet0 vmnet1 vmnet8 vsock watchdog xconsole zero So my question is: How do I setup my mouse correctly in Debian wheezy?

    Read the article

  • convert decrypted .vobs to .avi with ffmpeg on ubuntu

    - by Arcath
    I have a .vob file that has bee ripped from a dvd, when I watch the .vob its very good quality video and 5.1 english audio but when I use ffmpeg it has rubbish video and mono french audio. That was using this command: ffmpeg -i /samba/ripping/vobs/12161840#2.vob -f avi /samba/ripping/avis/test.avi I've tried a few different variations on that but it never comes back with anything good just bigger files with bad video and incorrect sound. I know the videos good and the correct audio streams exist so how do I select a 5.1 track and get good video? ffmpeg gives the .vob details as: Input #0, mpeg, from '/samba/ripping/vobs/12161840#2.vob': Duration: 00:42:05.56, start: 0.287267, bitrate: 5738 kb/s Stream #0.0[0x1e0]: Video: mpeg2video, yuv420p, 720x576 [PAR 64:45 DAR 16:9], 8436 kb/s, 25 fps, 25 tbr, 90k tbn, 50 tbc Stream #0.1[0x80]: Audio: ac3, 48000 Hz, 5.1, s16, 384 kb/s Stream #0.2[0x81]: Audio: ac3, 48000 Hz, 5.1, s16, 384 kb/s Stream #0.3[0x82]: Audio: ac3, 48000 Hz, mono, s16, 192 kb/s Output #0, avi, to '/samba/ripping/avis/test.avi': Metadata: ISFT : Lavf52.64.2 Stream #0.0: Video: mpeg4, yuv420p, 720x576 [PAR 64:45 DAR 16:9], q=2-31, 200 kb/s, 25 tbn, 25 tbc Stream #0.1: Audio: mp2, 48000 Hz, mono, s16, 64 kb/s Stream mapping: Stream #0.0 -> #0.0 Stream #0.3 -> #0.1

    Read the article

  • Why my internal hard disk can be ejected?

    - by Bear Bear
    I have 6 hard disks in my computer and one DVD. The disk that I connect to the 6th SATA port is a regular disk. But my Windows 7 64 bit shows it as a removable drive. I can eject my hard disk! Just like a pen drive. If I connect another disk to the 6th port, I can eject that disk too. So it has nothing to do with the physical disk, it must be something related to Windows or BIOS I don't understand why Windows 7 is seeing a normal hard disk as removable. In Computer Management - Disk Management, the disk looks identical to the others - there is nothing there to suggest the drive is different from the others. But in the tray I have the icon to eject it. The motherboard model is ASUS F2A85 V PRO FM2. All the disks are formatted normally, no Dynamic Disk, no RAID, nothing special. How can I tell Windows 7 to treat the disk exactly like the others, so it can't be ejected?

    Read the article

  • Can't get past bootcamp Windows logo, freezes immediately after picking boot partition -- Windows 7

    - by cksubs
    Hi, I had a fine install of Windows 7 alongside Snow Leopard. I had a power outage, and Windows restarted. When I booted via the "Hold Option" sceen, it started hanging at the grayscale "Windows logo" (squares) that comes up after picking the Windows drive from the bootcamp loader (the Windows version of the grayscale Apple logo when OS X loads). I think this happened once before, and installing rEFIt helped. I did that, but it continued to hang at the same point. I finally got fed up with it and erased the Windows partition via Disk Utility. I then reinstalled Windows 7 x64 from DVD to the fresh partition. Seemed fine. Ran Windows Update then restarted. FFFFFFFFF. Hangs in the same place. What can I do? Like I said, I already have rEFIt installed. Booting the Windows 7 install CD results in the same infinite loading error. I don't have a spare Snow Leopard disk handy.

    Read the article

  • How to restore windows.old for windows 7

    - by Jim Thio
    I reinstall windows. Then I regret that and want to go back. Fortunately the old windows is stored at windows.old I follow the instruction in http://support.microsoft.com/kb/971760 I did it all with small catches When I insert the windows 7 installer, the drive for installer is X and my hard disk is D rather than C. However, on normal windows operation the drive is C. Only when I boot through CD the partition is assigned to the letter D. There is no file bootsect on my windows installer So I can't do **D:\boot\bootsect /nt60 c:** Which should be changed to X:\boot\bootsect /nt60 C: or X:\boot\bootsect /nt60 D: depending on what it really does. As I said if I boot through windows dvd my hard disk letter is D but normally it's C. I am not even sure what that bootsect does anyway. I also can't do this one Attrib –h –s –r boot.ini.saved Copy boot.ini.saved boot.ini There is no file boot.ini or boot.ini.saved It's hidden but I don't see it if I try to look unhidden files either. Because I simply switch from windows 7 to windows 7 and the directory for windows don't change c:\windows I thought it should still work. Well, it doesn't. When windows restart it only goes to the logo and then restart the computer.

    Read the article

  • Using my old PC as a web/file server?

    - by Garrett
    I have an old desktop computer that I've been trying to sell for AGES. I guess nobody is looking for computers because it was advertised at a dirt cheap price on craigslist, local papers, etc. Anyways, I was wondering if it would be worth it to set it up as a home file server, a web dev server (I have a web host for actual production use), and maybe host a few server applications (ex: ventrillo). The computer is actually an old Dell that I cannibalized after the motherboard being destroyed by lightning, so it has fairly new parts in it. The specs are: P4 3.4GHz w/ HT and Artic Cooling Freezer 7 3GB DDR2 533 RAM 80GB hdd (will upgrade the hard drive if it's even worth using as a server) basic dvd rom 430 Watt Thermaltake PSU (it might be important to note that it is only 60% efficiency) ATI Radeon x600 256MB Antec 300 case It's not a really beefy machine, I just can't see giving it away or putting it in the corner to just collect dust. I have Windows Server 2008 R2 Standard and I am confident in my skills in operating most Linux operating systems. I'd also be using it to tinker with when I learn new things in my server admin classes (I'm finishing my 2nd year in college at the moment so I'm still learning) Also, my house is quite old and the electrical wiring is pretty poor (it MIGHT be up to code, then again, where I live most people don't even know what regulations are or let alone know how to spell it...) Would it be safe to leave it running all day and is it going to run up my electric bill because of the PSU efficiency? I only have 5mbit cable internet, but I won't be running very bandwidth intense services on it so it should be ok. I should elaborate on why I am concerned about the power. The circuits should be fine, but I'm more concerned about fire hazard. What is the likelihood that the server could cause an electrical fire? Again, thank you all for the feedback!

    Read the article

  • Can I still restore partition table?

    - by Johannes Lund
    Once I was going to resize partitions on my Mac HD from Bootcamp. I changed my mind and was going to quit, but apparently I hit a button, which made every single mac partion dissapear, and windows 7 refused to restart and be reinstalled. The 1 TB large HD consists of 3 partions, I believe. Since I can't see their actual size (except bootcamp), this is how I recall it. Macintosh HD about 500GB (Somewhere around 700GB according to disk utillity, but 500 according to Finder, and 500GB was all I could access.) Lion Recovery disk Bootcamp 293.36 GB To fix this I connected my mac via target disk mode to a pc and ran TestDisk. However this is the results: Since I Don't have 10 reputation I cant post the image showing the testdisk results, so I post a link instead hoping it is ok. The two mac partitions' sizes are completely wrong, and BOOTCAMP isn't showing. I tested using disk utilities from the snow leopard dvd. There there is one 293.36 GB Mac OS Extended partition. Before I had the firewire cable for target disk mode I tried reinstalling windows. Without success I tried again formating BOOTCAMP. Was that a bad thing to do? Could it have overwritten data from Macintosh HD? Unfortunately I have no backup. I could bring it to some kind of computer repair firm though.

    Read the article

  • New build won't boot: some fans turning, no beep or video

    - by Dave
    When my new system is powered up, the case fan and power supply fans turn fine. The CPU fan twitches, but never gets going. Although I've heard that with AMDs and Gigabyte motherboards that is not necessary a problem. Hard drive is spinning. However, there is absolutely no indication that anything else is happening. The motherboard, as far as I can tell, does not have an internal speaker, but I harvested one from another machine and plugged it in and still no beeps at all. The monitor screen stays black, on both the integrated VGA and DVI. This is a brand new build, and has never successfully booted. My parts are: AMD Athlon II X2 245 Regor 2.9GHz Socket AM3 65W Dual-Core Processor Model ADX245OCGQBOX - includes CPU cooler) GIGABYTE GA-MA785GPMT-UD2H AM3 AMD 785G HDMI Micro ATX AMD Motherboard - Retail G.SKILL Ripjaws Series 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Desktop Memory Model F3-10666CL8D-4GBRM - Retail CORSAIR CMPSU-400CX 400W ATX12V V2.2 80 PLUS Certified Compatible with Core i7 Power Supply - Retail SAMSUNG Spinpoint F3 HD502HJ 500GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive COOLER MASTER Elite 341 RC-341C-KKN1-GP Black Steel MicroATX Mid Tower Computer Case - Retail I also have a DVD burner, but it acts the same whether that is plugged in or not. I'm using the on board video. What I've tried so far: I've switched power supplies, with no difference. I've tried different monitors (of which all are working on other machines) with no difference. I have tried putting it one memory module at a time, with no difference. I have tried the absolute minimum I can think of (power supply into motherboard, power button ONLY plugged into front panel, CPU fan plugged in), with no difference. I appreciate any ideas anyone might have. Do I need to RMA the motherboard? This is my first build, so there might be something obvious. I was very careful in assembly with static; I'm confident nothing was zapped during assembly.

    Read the article

  • Vista won't boot. BSOD: Page fault in nonpaged area

    - by user31576
    Here's the story: I let Windows Update do the updates it wanted to do, then rebooted the computer. The updating process was taking time so I went away. When I came back, my computer was rebooting. It got as far as the Windows logo with the laoding bar. BSOD'd. Rebooted. And I'm stuck in this loop ever since. Looked up on the net, the "Page fault in nonpaged area" seems to be linked to faulty RAM or drivers. So I ran a memory test, it found no error. When I try in safe mode (with promt) I can see a list of drivers being loaded, then I get the same BSOD. I tried to repair using the Vista DVD, it says "nothing to repair". I tried to restore to a previous state, it says "no restore point found". So, my guess is, it's got something to do with the drivers. How can I identify the one causing the BSOD? If you have any other leads, What can I do? By the way, I'm writing from this very computer, running a linux distro I installed after the BSOD loop started. So i guess it's not an hardware issue. I have backed up important data, and will format and reinstall Windows if I must. But I'd like to avoid that. Thanks in advance for any help you can give me.

    Read the article

  • Windows 7 Won't Boot

    - by Vie
    I recently built a new computer, my fifth one. ASUS Maximus III Formula LGA 1156 Intel P55 ATX Motherboard EVGA 01G-P3-1452-TR GeForce GTS 450 Superclocked 1GB 128-bit GDDR5 PCI Express 2.0 x16 HDCP Video Card COOLMAX RM-1000B 1000W ATX psu Intel Core i7-875K lynnfield 2.93GHz LGA 1156 95w Quad-Core unlocked processor G.SKILL Ripjaws Series 16 (4x4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) memory WD VelociRaptor WD3000GLFS 300gb 10000 RPM SATA 3.0Gb/s Hard Drive Sony Optiarc CD/DVD Burner model AD-7261S-0B LightScribe Windows 7 Home Premium 64-bit It gets hung up on the starting windows screen. When I went to install the OS it did the same thing wouldn't go past the windows logo, so I put the new HDD into my old computer and installed windows 7 thinking it was just an installer error. Put the fully installed HDD back into my new machine and it still gets stuck on the starting windows screen. I've tried most everything I've looked up. Disabled USB, Disabled Turbo Boost, Disabled everything that wasn't essential(just about every configuration I can think of), took it apart and put it back together, took all the ram out save one 4g stick(wouldn't even boot when I did this), did a memory scan which came back successful, I don't know what could be wrong. Only thing I can think of is a compatibility issue somewhere, but I've ran over it again and again and I don't know where there would be an issue like that. Need Backup! .<

    Read the article

  • How do I diagnose the cause of a freeze after resuming in Windows XP (SP3)?

    - by Software Monkey
    I have just built a new computer from parts. Whenever I resume from any sleep mode (S1, S3 or S4) the computer freezes within about 60 seconds of the welcome screen appearing. I have updated the BIOS and all drivers to current from the motherboard manufacturer's site. I have reset BIOS settings to default, including disabling AMD Cool n Quiet. The windows event logs are not helpful at all. Other than immediately after resuming the system is stable as long as AMD CnQ is disabled. The system is: Mobo : MSI 790GX-G65 CPU : AMD Phenom II 965 BE at 3.6 GHz Memory : Corsair DDR3 1600, at 1333 MHz and 9-9-9-21 HDDs : 1 EIDE, 2 SATA in RAID-0 DVD : 1 Card Reader: 1 multi-card reader Keyboard is attached via PS2 and mouse is USB. Any thoughts or pointers would be most welcome. EDIT: It appears that the computer may not freeze if a program is left running which puts it under significant load. I left a stress test running which keeps all cores under 85% load, and my son put the computer to sleep - while this program is running it I have been able to resume from S3 successfully 4 times, compared against about 20 tests with the computer idle which have all frozen. So this may be related to being in an idle state when it resumes.

    Read the article

  • How do I install Windows XP from an external hard drive?

    - by Plasmer
    I'm trying to install Windows XP Media Center edition by copying the install disc image to an external hard drive and making it bootable. Has anyone had success getting this to work on systems that can't boot from dvds/floppies? I'm basically working from this guide: http://www.dl4all.com/other/21495-install-windows-xp-from-usb.html Update - 2/15/10 I used WinToFlash on my laptop to format my usb hard drive from my install dvd (Windows XP Media Center Version 2005 with Update Rollup 2 from Dell) and selected "boot from usb device" at the boot selection menu and the windows installer started up. However, an error message came up saying that: "A problem has been detected and windows has been shut down to prevent damage to your computer." Originally on my desktop machine, I had 1 150Gb SATA drive, and 2 150 Gb SATA drives striped together using RAID. From the hard drive diagnostics, it appears the windows install on one of the RAIDed disks lost a block and this has been preventing me from booting up. I replaced the standalone drive with a new 1Tb SATA drive and disconnected the other hard drives. Could the message be indicating a virus is on the unformatted drive? or the usb hard drive? Update 2 - 2/15/10 The external hard drive didn't find any viruses when scanned. I tried installing Vista Home Premium 64bit SP1 using WinToFlash and that installed successfully onto the new 1Tb drive. WinToFlash was really easy to use and helped a lot, thanks!

    Read the article

  • Virtual Windows 2008 Server Activation with ESX

    - by Logman
    I had a decommissioned server (Dell PE2950) that we could still use, it had OEM Windows 2003 Std on it but wanted to use it as a new host with VMware ESX5 to put a couple legacy severs on it. I wiped it clean and maxed out the memory. But when I added the memory I noticed the product key sticker was a "WindowsServer08 Std 1-4cpu" product key, and it also had a Virtual Key. Not sure why it had Win2003 and not Win2008 from the start, but I would like to use that license if I can. The virtual host would stay on the same physical server, so there shouldn't be a problem with licensing... but I do not want to use Hyper-V unless I can not help it. I have installed ESX5 on the server, but I cannot get the Windows 2008 server to activate. The product key is hard to read, and I have checked the key quite a few times. But my question is... Is it because Hyper-V was not installed on the host? But I thought you could use the product key alone on a virtual host? Maybe because I am not using a Dell Windows 2008 disk but iso from MS directly via the Volumne Licensing site? EDIT: well, Im pretty sure I got the product key correct. If its not the product key, could the activation problem be because Im not using hyper-v or maybe the correct install dvd? EDIT2: maybe because I added 28GB of memory? Originally 4GB...

    Read the article

  • 2011 i7 Macbook Pro unable to boot from any Windows CD?

    - by Craig Otis
    I'm encountering issues installing Windows alongside my Lion install. I'm attempting to install from the internal SuperDrive, after using Boot Camp to partition what was a single, HFS+ volume. When holding down Option at boot, the CD appears in the startup list, but upon selecting it, I get a gray screen for 5 minutes, then a flashing white folder. I tried installing rEFIt and using this to boot the CD, but I receive an error about "Not Found" being returned from the "LocateDevicePath", and a mention of the firmware not supporting booting using legacy methods. In the Console, when opening the StartupDisk preference pane (which never presents the CD as a selectable option), I see: 11/25/11 4:39:31.159 PM System Preferences: isCDROM: 0 isDVDROM:1 11/25/11 4:39:31.159 PM System Preferences: mountable disk appeared: /Volumes/GRMCPRFRER_EN_DVD 11/25/11 4:39:33.214 PM System Preferences: - So far so good, passing disk to System Searcher. 11/25/11 4:39:33.218 PM System Preferences: OSXCheck: No boot.efi in System Folder or volume root. 11/25/11 4:39:33.220 PM System Preferences: WinCheck: Not a valid windows filesystem: /Volumes/GRMCPRFRER_EN_DVD 11/25/11 4:39:33.220 PM System Preferences: WinCheck: Not a valid windows filesystem: /Volumes/GRMCPRFRER_EN_DVD I'm at a loss here. I've done my research, but it sounds like most of the rEFIt errors of this nature are caused by installing from a thumbdrive, or an external drive. I'm using the internal SuperDrive. Also, I've tried this with two different disks: A Windows XP SP2 CD A Windows 7 x86 DVD Both are disks I've had around for years, and I've used them reliably in the past. The system is an early 2011 15" Macbook Pro, all firmware updates installed.

    Read the article

  • UPS power requirements for server

    - by captainentropy
    Greetings! So, I just placed an order for a new server. The company recommended that I get a 3000W UPS. (!) As best as I could I calculated the following wattage consumption based on benchmarked data or datasheets provided by the manufacturers of each component: number watts **total watts** MoBo 1 240 240 CPUs (E5540) 2 80 160 RAID cards (3ware) 2 18 36 RAM (6x4GB) 6 3 18 DVD drive 1 7 7 floppy 1 2 2 RE4 drives 8 7 56 WD20 drives 8 6 48 Intel X25 SSD 2 0.15 0.3 total = 567 So that is for the PSU requirements only. The PSUs in the machine are a 720W for the master node and 800W each for two subsystems. That's a total of 2320W that can be delivered by these PSUs. But that is 4X the amount being consumed, at most, by the components. I didn't count case fans or the eSATA card (3W maybe?) or what the PSUs themselves require but assuming I double or triple my calculations I'm not even remotely close to the 3000W UPS I was suggested to get. They run at least $1100. I could get a 2000W for about $750 or a 1500W for $450 and still be well over my estimated power need. I don't think I need a whole lot of run time in the case of a power outage, maybe 20 minutes max, enough time to shutdown if the power doesn't come on within 5-10 minutes. Any thoughts? Am I off on my calculations? Did I overlook something major? If so what are your suggestions for a UPS? Thanks!

    Read the article

  • HP Pavillion DV6500 recovery disk failure

    - by Scott W
    I recently attempted to re-install Windows Vista on an HP Pavillion DV6500 using the factory recovery DVD's, but encountered a strange problem. When the recovery disk attempted to reformat the hard disk, it failed at 22%. The error message provided was not very informative, just the error code "0x400110020000 1005". A google search turned up some people with a similar problem who asserted that HP has been know to ship corrupted recovery DVDs. The recovery disk did manage to reformat the the recovery partition before failing though, so recovering from the partition is no longer an option. It would be possible to reinstall from an off-the-shelf retail copy of Vista and then pull the drivers from HP's website, but I don't have access to a copy of Vista, and it would really be outrageous to have to purchase a new OS when I have a perfectly valid license already. Thought about biting the bullet and upgrading to Windows 7, but my understanding is that without Vista installed I'd be unable to use the upgrade version, and be forced to purchase the more expensive non-upgrade retail copy (!). Can anyone suggest a possible solution to this Catch-22? I've run out of ideas.

    Read the article

  • Server freezes while installing Redhat Enterprise Linux Server 6

    - by eisaacson
    We've tried both the first options Install or upgrade an existing system Install system with basic video driver When trying option #1, it gets to a screen that has a solid cursor about halfway down, then freezes. When trying option #2, it freezes at the point where it says: Waiting for hardware to initialize... Of course, we bought the unsupported version and haven't found anything to help us so far. Here are the specs to the server in the original post: ASUS P8Z68-M Pro LGA 1155 Intel Z68 HDMI SATA 6Gb/s USB 3.0 Micro ATX Intel Motherboard with UEFI BIOS RAIDMAX Reiter ATX-305WBP Black Steel / Plastic ATX Mid Tower Computer Case 450W Power Supply Intel Core i7-2600 Sandy Bridge 3.4GHz (3.8GHz Turbo Boost) LGA 1155 95W Quad-Core Desktop Processor Intel HD Graphics 2000 BX80623I72600 16GB Ram OCZ Agility 3 SSD 120GB From some of the posts out there could the UEFI Bios or the Sandy Bridge processor be a culprit here? We just tried the DVD on a different computer and it got past that point with ease. It's a standard Dell build compared to our custom machine. Could it be having difficulty recognizing drivers? How do we get past that?

    Read the article

  • Why do manufacturers not show all hardware power usage?

    - by Drew
    I find it slightly more difficult to build a computer when I do not know how much power is needed for a component. When selecting a power supply for a computer, it is difficult to know how large of one to get. You don't want to go too large for cost reasons and circuit reasons, but you don't want to go too low and not be able to properly use every component. For instance, a graphics card might say "Minimum of a 500 Watt power supply. (Minimum recommended power supply with +12 Volt current rating of 30 Amps.)" But it really needs 360W (12V * 30A). So why don't they just say "Uses 360W max and xxxW peak"? Processors, I have noticed are good at reporting their power usage, but aside from processors and sometimes graphics cards, power usage is easily found. What is the power consumed by the Blu-ray / DVD drives? By the HDDs/SSDs? By the Mobo? etc. Why are these questions not easily answered when building a machine?

    Read the article

  • Unable to Use Bluetooth Mighty Mouse or Wireless Keyboard with Boot Camp

    - by Kristopher Johnson
    I have Windows 7 64-bit running on a MacBook Pro in a Boot Camp partition. I am trying to pair with my Bluetooth Mighty Mouse and Apple wireless keyboard under Windows, but whenever I try to do so, here's what happens: While on the Add a device window, I turn on the mouse or press a key on the keyboard, and the mouse or keyboard shows up in the list of available devices. I click the device and then the Next button, and the window displays Connecting to device... Time passes. Eventually, I get this error message: Adding this device to this computer failed Adding the device failed resulting in an unknown error. The reported error code is 0x80070015. Contact your device manufacturer for assistance. I've run Windows Update and Apple Software Update. I've also tried reinstalling the drivers from the Snow Leopard DVD. The mouse and keyboard both work fine when I boot into Mac OS X. FWIW, after many, many repeated tries, I eventually got it to work. I don't know why. So while my problem is solved, I'd still like to get an "answer" as to why trial-and-error seems to be the only approach. The keyboard, in particular, was hard to get set up. A few times, Windows would apparently recognize it and prompt me to enter the pairing code, but then it would time out after a couple of seconds (not long enough to enter the code). Grrrr.

    Read the article

< Previous Page | 66 67 68 69 70 71 72 73 74 75 76 77  | Next Page >