Search Results

Search found 23472 results on 939 pages for 'show'.

Page 697/939 | < Previous Page | 693 694 695 696 697 698 699 700 701 702 703 704  | Next Page >

• HP dv6910 laptop no longer recognizes wireless adapter, dvd drive, and one usb port. What can I do about this?

  - by Joan H.

  In the last 3 weeks, my not even 3 year old HP laptop (vista) just seems to be failing. First, one of the usb ports stopped working. Next, the dvd drive all of a sudden was not recognized as even existing, so it is now useless. And as of today, I no longer seem to have a wireless adapter on my laptop. It doesn't show up in device manager, same as the dvd drive. I can connect to the internet by ethernet cable, but not wirelessly. It worked fine last night; now it doesn't even exist! I have tried a 'hard reset' I read about on HP's forum- no help. I am not sure what else to try. I read about the USB wifi dongle in another response, but I already have maxed our my usb ports even though I have bought a USB hub since the one port failed. Plus, I'd like my laptop to just work like it's supposed to instead of being jerry rigged with usb hubs, external dvd drives, and wifi dongles etc. Any ideas?

  Read the article

• Problems Installing slapd On Ubuntu Server 11.10

  - by Zach Dziura

  I know that there's a Ubuntu-specific StackExchange website, but I thought that I'd ask here because it's a server-specific question. If I'm wrong in my logic... Well, you people are better at this than I am! O=) On with the show! I'm in the process of installing Oracle Database 11g R2 Standard Edition onto Ubuntu Server 11.10. I found a guide on the Oracle Support Forums that walks you through the process fairly easily. Unfortunately, I'm running into issues installing one particular dependency: slapd. When I go to install it, I get this error message: (Reading database ... 64726 files and directories currently installed.) Unpacking slapd (from .../slapd_2.4.25-1.1ubuntu4.1_amd64.deb) ... Processing triggers for man-db ... Processing triggers for ufw ... Processing triggers for ureadahead ... Setting up slapd (2.4.25-1.1ubuntu4.1) ... Usage: slappasswd [options] -c format crypt(3) salt format -g generate random password -h hash password scheme -n omit trailing newline -s secret new password -u generate RFC2307 values (default) -v increase verbosity -T file read file for new password Creating initial configuration... Loading the initial configuration from the ldif file () failed with the following error while running slapadd: str2entry: invalid value for attributeType olcRootPW #0 (syntax 1.3.6.1.4.1.1466.115.121.1.15) slapadd: could not parse entry (line=1051) dpkg: error processing slapd (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: slapd E: Sub-process /usr/bin/dpkg returned an error code (1) After much Google searches and forum trolling, I have yet to find a definitive answer as to what's going wrong. The error messages seem straight forward enough, but I have no idea how to debug this. Can anyone offer some assistance? Again, if I'm asking in the wrong place, I apologize. If I'm indeed asking properly, then thank you for any and all help!

  Read the article

• iptables to block VPN-traffic if not through tun0

  - by dacrow

  I have a dedicated Webserver running Debian 6 and some Apache, Tomcat, Asterisk and Mail-stuff. Now we needed to add VPN support for a special program. We installed OpenVPN and registered with a VPN provider. The connection works well and we have a virtual tun0 interface for tunneling. To archive the goal for only tunneling a single program through VPN, we start the program with sudo -u username -g groupname command and added a iptables rule to mark all traffic coming from groupname iptables -t mangle -A OUTPUT -m owner --gid-owner groupname -j MARK --set-mark 42 Afterwards we tell iptables to to some SNAT and tell ip route to use special routing table for marked traffic packets. Problem: if the VPN failes, there is a chance that the special to-be-tunneled program communicates over the normal eth0 interface. Desired solution: All marked traffic should not be allowed to go directly through eth0, it has to go through tun0 first. I tried the following commands which didn't work: iptables -A OUTPUT -m owner --gid-owner groupname ! -o tun0 -j REJECT iptables -A OUTPUT -m owner --gid-owner groupname -o eth0 -j REJECT It might be the problem, that the above iptable-rules didn't work due to the fact, that the packets are first marked, then put into tun0 and then transmitted by eth0 while they are still marked.. I don't know how to de-mark them after in tun0 or to tell iptables, that all marked packet may pass eth0, if they where in tun0 before or if they going to the gateway of my VPN provider. Does someone has any idea to a solution? Some config infos: iptables -nL -v --line-numbers -t mangle Chain OUTPUT (policy ACCEPT 11M packets, 9798M bytes) num pkts bytes target prot opt in out source destination 1 591K 50M MARK all -- * * 0.0.0.0/0 0.0.0.0/0 owner GID match 1005 MARK set 0x2a 2 82812 6938K CONNMARK all -- * * 0.0.0.0/0 0.0.0.0/0 owner GID match 1005 CONNMARK save iptables -nL -v --line-numbers -t nat Chain POSTROUTING (policy ACCEPT 393 packets, 23908 bytes) num pkts bytes target prot opt in out source destination 1 15 1052 SNAT all -- * tun0 0.0.0.0/0 0.0.0.0/0 mark match 0x2a to:VPN_IP ip rule add from all fwmark 42 lookup 42 ip route show table 42 default via VPN_IP dev tun0

  Read the article

• Graphite not running

  - by River

  I'm currently trying to install graphite 0.9.9 on a gentoo box using these instructions from the graphite wiki. Essentially, it fronts graphite using apache and mod_wsgi. Everything seems to have gone well, except that apache / the graphite webapp never seem to return a response to the web browser (the browser continuously waits to load the page). I've turned on the graphite debug info, but the only message in the log files is this, repeated over and over again in info.log (with the pid always changing): Thu Feb 23 01:59:38 2012 :: graphite.wsgi - pid 4810 - reloading search index These instructions have worked for me before to set up graphite on an Ubuntu machine. I suspect that mod_wsgi is dying, but I have confirmed that mod_wsgi works fine when not serving the graphite webapp. This is what my graphite.conf vhost file looks like: WSGISocketPrefix /etc/httpd/wsgi/ <VirtualHost *:80> ServerName # Server name DocumentRoot "/opt/graphite/webapp" ErrorLog /opt/graphite/storage/log/webapp/error.log CustomLog /opt/graphite/storage/log/webapp/access.log common # I've found that an equal number of processes & threads tends # to show the best performance for Graphite (ymmv). WSGIDaemonProcess graphite processes=5 threads=5 display-name='%{GROUP}' inactivity-timeout=120 WSGIProcessGroup graphite WSGIApplicationGroup %{GLOBAL} WSGIImportScript /opt/graphite/conf/graphite.wsgi process-group=graphite application-group=%{GLOBAL} WSGIScriptAlias / /opt/graphite/conf/graphite.wsgi Alias /content/ /opt/graphite/webapp/content/ <Location "/content/"> SetHandler None </Location> # XXX In order for the django admin site media to work you # must change @DJANGO_ROOT@ to be the path to your django # installation, which is probably something like: # /usr/lib/python2.6/site-packages/django Alias /media/ "/usr/lib64/python2.6/site-packages/django/contrib/admin/media/" <Location "/media/"> SetHandler None </Location> # The graphite.wsgi file has to be accessible by apache. It won't # be visible to clients because of the DocumentRoot though. <Directory /opt/graphite/conf/> Order deny,allow Allow from all </Directory> </VirtualHost>

  Read the article

• How can I enable IIS to run Perl scripts?

  - by eidylon

  we're trying to get awstats up and running on our IIS6 server. awstats is running fine and generating output and all that jazz... no problem there. When trying to change the selected month/year in the output page though, it is trying to run awstats.pl through IIS, and coming up with a 404 error. To debug I made a simple hello.pl in my root, and tried to run that, also 404s. I followed the directions on this page http://support.microsoft.com/kb/245225 regarding installing ActiveState Perl and then configuring IIS. I added the extension mapping on my directory and registered the web services extension as directed. The perl scripts all run fine and output if run from the command line, so I know perl is good, but I can't get IIS to find the files. Here is the configuration on my the home directory tab of my site: Here is the configuration of my web service extension: I turned on directory browsing for this site, and when i get the listing of the directory, IIS actually does show the .pl files being in the directory. But if I click on one of them, I get the 404 error. 12/17 15:22 Also tried adding .pl as a mime-type on my site's configuration. This did not help. 12/17 16:57 Also tried Everyone Read/Execute permissions on both the Perl direcory and the directory housing awstats. This did not help.

  Read the article

• linux container bridge filters ARP reply

  - by Dani Camps

  I am using kernel 3.0, and I have configured a linux container that is bridged to a tap interface in my host computer. This is the bridge configuration: :~$ brctl show bridge-1 bridge name bridge id STP enabled interfaces bridge-1 8000.9249c78a510b no ns3-mesh-tap-1 vethjUErij My problem is that this bridge is dropping ARP replies that come from the ns3-mesh-tap-1 interface. Instead, if I statically populate the ARP tables and ping directly everything works, so it has to be something related to ARP. I have read about similar problems in related posts, and I have tried with the solutions explained therein but nothing seems to work. Specifically: ~$ grep net.bridge /etc/sysctl.conf net.bridge.bridge-nf-call-arptables = 0 net.bridge.bridge-nf-call-iptables = 0 net.bridge.bridge-nf-call-ip6tables = 0 net.bridge.bridge-nf-filter-vlan-tagged = 0 net.bridge.bridge-nf-filter-pppoe-tagged = 0 arptables and ebtables are not installed. iptables FORWARD is all set to accept: Chain FORWARD (policy ACCEPT) target prot opt source destination The bridged interfaces are set to PROMISC: ~$ ifconfig ns3-mesh-tap-1 Link encap:Ethernet HWaddr 1a:c7:24:ef:36:1a ... UP BROADCAST PROMISC MULTICAST MTU:1500 Metric:1 vethjUErij Link encap:Ethernet HWaddr aa:b0:d1:3b:9a:0a .... UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 The macs learned by the bridge are correct (checked with brctl showmacs). Any insight on what I am doing wrong would be greatly appreciated. Best Regards Daniel

  Read the article

• Printing special / extended characters on web page - Firefox or printer issue?

  - by edmicman

  My dad brought this to my attention and I'm looking into it, but thought I'd post here and see if anyone has any ideas... He's running Win7, using Firefox and printing to a wireless connected Brother HL-2170W printer. He's got a web page (http://cornandsoybeandigest.com/inputs/fertilizer/applying-nitrogen-after-planting-0512/index.html) that has extended/special characters in it - the funny "a" in Fernandez. The characters show correctly in Firefox on the page. He printed it, and the extended "a" printed as a diamond with a question mark. He says it shows that way in the print preview, too. I pulled up the same page in Ubuntu, Firefox, and it displayed in my print preview and physically printed everything correctly. I just checked on my wife's Win7 PC in Firefox and the print preview looked correct on her system, too. We have a Brother 2040 here. Soooo, my question is, is this possibly a problem in the browser somehow, or the printer driver? I'm leaning towards the printer driver now, but I can't say I've run into this before. Is it a setting somewhere? I just installed this printer for him the other day, using the CD that came with it; I could try updating the driver from Brother's website I guess. Is there anything else I should look at or check? Thanks!

  Read the article

• How to track which process is failing logons?

  - by Massimo

  Windows Server 2003, VMWare VirtualCenter 2.5. Something is continuously trying to log on to VirtualCenter using a disabled domain account; the failed logon attempts are logged by VirtualCenter in its own logs and by Windows in the Security event log. This happens roughly every minute or two. The source of the logon attempts is 127.0.0.1, so it must be some process running on the server itself. There are no services running as this user account and no scheduled jobs on the system. The task manager doesn't show any proces running under this account, either. The user account's name is nowhere to be found in the Registry. But some process is trying to use it, and failing. It probably is not some critical process, as everything looks fine; it could be something that was installed long ago and forgotten there. Whatever it is, it probably is running under another user account (possibly a system one), but is trying to log on to VC using those credentials, which are probably saved in some configuration file, since they're not stored in the Registry. How can I track which process is trying (and failing) those logon attempts, either using Windows or VirtualCenter?

  Read the article

• Arch Linux: How to handle patches which only you will use?

  - by user12932

  I'm using freerdp together with xmonad and it has been giving me a lot of trouble. The super key (or "windows key") is my mod key in xmonad and it has been interfering with my freerdp usage rather annoyingly. Whenever I switched workspaces (or did anything else in xmonad involving the super key), windows (controlled by the freerdp instance in focus) registered a keypress as well. This event combined with the loss of focus got the super key stuck in windows indefinitely: the press of the keys d and r would first show my desktop, then open the run dialog (as if I was pressing the windows key constantly). I've tried several versions of freerdp, but all exhibited this annoying behavior. So I resorted to patching freerdp myself to just ignore the left super key on my keyboard. I love free software for a lot of reasons (especially the ability to alter things like this myself), however I still find it annoying to patch and rebuild freerdp on all version (and dependency) changes. How do you deal with situations like this? Is there even a "right way" to resolve this issue?

  Read the article

• SSH tunnel for socks5 proxy is slow with concurrent load

  - by RawwrBag

  I ssh to a remote AWS server using Ubuntu. I use ssh's port forwarding capabilities to do this. I have tried forwarding a dynamic port (ssh -D) or a single port (ssh -L with dante running as a remote socks server). Both are equally slow. I also tried different ciphers (ssh -c). Concurrent TCP connections pretty much do not work. For example, I can go to speedtest.net and start a test (which is fairly fast, probably maxes out my line speed) and if I try and do anything (i.e. load google.com) while the test is still running, all the additional connections seem to hang until the speed test is over. I realize OpenSSH is single-threaded. Is this the problem? It doesn't even show up on my top. Same goes for sshd on the remote server -- no processor hit. Is there anyway to bump ssh performance or should I step up to OpenVPN or something better suited for this?

  Read the article

• No sound out of headphone port on laptop

  - by Thanatos

  I cannot get sound out of the headphone port on a laptop. Headphones are plugged in, and sound comes out of the internal speakers. Windows behaves normally (sound switches to headphones when headphones are inserted). It did work in Linux at one point, but something changed, we're just not sure what. Rebooting doesn't fix. This appears to occur whether or not PulseAudio is running. Things I've tried: Rebooting. No effect. Booting into Windows. It works properly, so probably not a hardware issue. All of alsamixer. My only controls are this: "Master" Volume bar & mutable, unmuted. Controls volume. "PCM" Volume bar only. 100%. "S/PDIF" Mutable only, currently muted, has no effect. "S/PDIF" Default PCM", Mutable only, currently unmuted, has no effect. Killing PulseAudio. No effect. (It also won't stay dead! Something appears to be restarting it, and I can't tell what, but it is annoying as fuck.) alsactl init 0, no effect. sudo rm -f /var/lib/alsa/asound.state, no effect. General system info: Ubuntu 10.04 LTS Toshiba Satellite T135D-S1324 lspci says I have: 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) 01:05.1 Audio device: ATI Technologies Inc RS780 Azalia controller Some edits: Yes, the headphones are in all the way. This works in Windows: You plug headphones in, the internal speakers stop making noise, and noise comes out the head phones. Windows says I only have two sound cards: the HDMI port (which I don't care about) and the "sound card", which it claims is a "Conexant Pebble High Definition SmartAudio" In Windows, both the internal speakers and the headphone jack show up as one soundcard, which in my experience, is typical. (This is a laptop)

  Read the article

• USB Harddisk not working on dual boot windows7/8

  - by Jesper

  Yesterday I installed Windows 8 on a machine that already had Windows 7. They are on dual boot and both systems work fine. The problem is that inserting a USB hard disk in either system does nothing. If I connect a USB mouse or mobile phone, they work fine, so the USB plugs are active/working and the USB hard drives that I am trying to connect work on my other laptop just fine. I have tried to uninstall all USB-related items in Device Manager and let them reinstall upon restart, but that didn't help. The USB drive does not show up in disk management either. The strange thing is that it is exactly the same situation on both windows. USB mice etc. work just fine and USB hard drives do not. Any ideas on solving this problem would be great. ...Don't know if it is important, but this is a Toshiba Tecra R950 Laptop. EDIT: I have found out that my other USB HD (Western Digital) works on this laptop, but for my StoreJet Transcend and Adata "something" does not work. All three work on another Windows 7 laptop. Sizewise the WD is in the middle at 400 GB. The StoreJet is 640 GB and the Adata is 200 GB.

  Read the article

• Web browsing through SSH tunnel gets stuck/clogged

  - by endolith

  I use tools like Tunnelier to log into my home Tomato router through SSH, and then use it as a proxy for web browsing, tunnel for Remote Desktop/VNC, etc. Most days it works great, but some days every page I try to view gets stuck, like the tunnel is clogged. I load a web page and it seems to be loading, then stops, with the little loading icon spinning and nothing happening. I refresh the page, I reboot the router, I reboot the other computers on my home network and turn off any bandwidth-hogging services on them, I've turned on QoS on the router to prioritize SSH. I don't understand what's getting stuck. Rebooting or disconnecting/reconnecting the SSH tunnel improves responsiveness for a minute, but then it gets clogged again. It also seems to help if I don't do anything on the tunnel for a few minutes, then it will be responsive for a bit and then get clogged again. Trying to open a terminal console from Tunnelier is also unresponsive, so it's not just a web browsing problem. Likewise, connecting to http://192.168.1.1 in the browser (to the router's web config through its own tunnel) is also slow/laggy/halting. The realtime bandwidth reported by the router is nowhere near my DSL connection's limits, though it does show big spikes during the laggy times, and the connection is responsive when it shows low bandwidths. How do I troubleshoot something like this?

  Read the article

• Recover data from Dynamic Disk (MBR) bigger than 2TB

  - by Helder

  Here is the situation: Promise Array FastTrak TX4310 with 3 disks (750 GB each) in RAID5. This comes to around 1500 GB of data. Last week I had the idea of expanding the RAID with an additional 750 GB disk. This would bring the volume to around 2250 GB. I plugged the disk and used the Webpam software to do the RAID expansion. However, I didn't count with the MBR 2TB limit, as I didn't remembered that the disk was using MBR instead of GPT and I didn't check it prior to the expansion. After a couple of days of expansion, today when I got home, the disk in Windows disk manager showed the message "Invalid disk" and when I try to activate it, it says "The operation is not allowed on the Invalid pack". From what I figured, the logical volume on the RAID expanded, and passed that info to the Windows layer and I ended up with an "larger than 2TB" MBR disk. I'm hopping that somehow I can still recover some data from this, and I was wondering if I can "rewrite" the MBR structure back to the 1500 GB partition size, so I can access the partition in Windows. Right now I'm doing an "Analyse" with TestDisk, as I hope the program will pickup the old 1500 structure and allow me to somehow revert back to it. I think that even though the Logical Drive in the RAID is bigger than the 2TB, I can somehow correct the MBR to show the 1500 GB partition again. I had a similar problem once, and I was able to recover the data using a similar method. What do you guys think? Is it a dead end? Am I totally screwed because there is the extra RAID layer that I'm not counting? Or is there other way to move with this? Thanks all!

  Read the article

• Master File Table Corrupt, any way to save data?

  - by domen

  hi. I've used search, but none of the results match my problem so I didn't have to ask separate question. I've Installed Windows 7 RTM recently and since then partitions located on one of my HDDs have gone "crazy". They used to "freeze" and didn't open in explorer for some time (minute or two, usually), sometimes all partitions of the drive wouldn't show until reboot and finally, one of those partitions started showing "disk structure is corrupted and unreadable" warning, it appeared in Disk Management window as RAW and chkdsk showed "mft corrupt". There were no important data on the partition and I didn't have enough time to analyze the problem at the moment, so I just reformatted it and ran antivirus scan on system. After that problem settled for some time, but yesterday the problematic HDD vanished again from the system. After reboot chkdsk identified mft of four partitions corrupt and now they are all in same conditions as the above mentioned one. But the difference is that the files stored in them are extremely important. and just for info: I upgraded from Win7 build 7077, but had some performance issues, so I reformatted system drive and installed fresh Win7 RTM on it. I've downloaded TestDisk and it shows all the partitions marked as NTFS (not RAW) and my knowledge of the program wasn't sufficient to obtain any other info from it :-) and the images that could help describe the problem (sorry, I'm not allowed to post images and more than one hyperlink): http:// img22.imageshack.us/img22/5909/chkdskz.jpg http:// img198.imageshack.us/img198/5576/computeray.jpg I'm interested, is there a way to let me restore the MFT or just access files so I can backup them before reformatting the drive. Thanks for your time. :) P.S. my reformatted drive is showing no problems, could there be a problem with windows 7 itself? I googled, but with no results.

  Read the article

• Fedora installed in Legacy mode, how to make it work in UEFI?

  - by TryntaLearn

  I am trying to install a linux distribution on my new laptop. It's an MSI GE40 which comes preinstalled with windows 8. It's a UEFI machine. I have tried installing Ubuntu and Fedora with limited success. I've tried: running it in UEFI, UEFI with CSM mode, with secureboot enabled, ... with secureboot disabeled, ... with secureboot enabled but in user mode. I have had no success with any of these methods. With Ubuntu the grub loader shows up, but when I pick 'try ubuntu', or 'install ubuntu', it's just a blank screen(I've been using liveusb's btw). With Fedora, it'll show me the next screen on which it says 'binary authorised by vendor certificate' or 'Secure boot not enabled' and then stop doing anything. The closest thing to success I reached was switching to legacy mode to install Ubuntu, in which case I was able to get to the ubunutu installer but it wouldn't recognize windows 8 on my computer, so instead of continuing on I rebooted, and removed the USB pendrive to find my computer couldn't find windows 8. After a little dicking about I got it to find windows 8 again. Any ideas on how I should go about trying to install a distro on my computer? UPDATE:- So I ended up installing fedora using Legacy mode. To use both it and Windows at boot, I manually enter automatic repair so I can get to my UEFI settings and switch boot mode to UEFI to boot windows 8. I guess my question needs to be modified as to how do I get all of this to work in UEFI mode, so I can dual boot via selection through a bootloader, and not by repeatedly switching boot mode.

  Read the article

• How can I get web pages from sub.a.com using url sub.b.com?

  - by Steven

  I have developed www.mysite.com. This site can be "integrated" into my partners website. What I do is to create partner1.mysite.com and repalce my header and footer with my partners header and footer and replace some CSS styling. This should make it as transaprent as possible for the user, so that they think they are still browsing my partners website. There are two ways I see how I can accomplish this: 1. My partner uses an IFrame to show the content from partner1.mysite.com 2. My partner creates sub domain and points it to my sub domain. Solution 1 is easy, but I'm not sure how search engines likes this, so I will try solution 2. QUESTION Can I use mysite.partner1.com but read content from partner1.mysite.com? I don't want to forward / redirect users to partner1.mysite.com. It's important that the URL is mysite.partner1.com / mysite.partner1.com/some/page. Is this possible? For testing, I have Apache configuration more or less like this: NameVirtualHost 10.0.0.17 <VirtualHost 10.0.0.17> DocumentRoot D:/wamp/www/mysite/ ServerName mysite.com </VirtualHost> <VirtualHost 10.0.0.17> DocumentRoot D:/wamp/www/mysite/ ServerName site1.mysite.com </VirtualHost> // Since this is on my localhost, I also configure site1 here <VirtualHost 10.0.0.17> DocumentRoot D:/wamp/www/site1/ ServerName site1.com </VirtualHost> <VirtualHost 10.0.0.17> ServerName mysite.site1.com --> DO SOME SORT OF FORWARDING HERE <-- </VirtualHost>

  Read the article

• Skip new Windows 7 user selection and go to login prompt

  - by Doltknuckle

  We've begun our migration to windows 7 and we ran into an interesting issue. When we hit "CTRL+ALT+DEL" we are brought to the "User selection Screen". Normally, this screen will have an icon for every local user for the machine. These machines are Domain members with "Fast User Switch" disabled so no user names are listed only the "Other User" option. If you click "Other User" or hit enter, the system moves on to the normal login screen where it prompts for user name and password. Here's the issue: We want to find a way to skip over the part where a user selects "Other User". We essentially want the system to always assume that we always want "Other User" and to go directly to the login screen when a user hits "CTRL+ALT+DEL". What I find odd is that the "Other User" doesn't show up until we've had more than one domain user log in. Right after we re-image the machine, the login process goes directly to the user credential prompt. Anyone have any ideas?

  Read the article

• Ubuntu network card problem.

  - by Steve Greene

  Hello folks, Several days ago, I installed Ubuntu 9.10 onto my Acer Aspire 3100 laptop, running it alongside Widows Vista as a dual-bootable system. Creation of the Ubuntu boot CD went fine, and the installation onto my hard drive was flawless. Ubuntu opens and behaves as I would expect, except for one little problem. For reasons unknown to me, Ubuntu is not communicating with my laptop's networking hardware, and I have no internet connectivity, it works fine under Windows Vista. Up in the right side of the Ubuntu desktop, I click on the network icon and it does not show a wireless connection at all. At home, where I use a dialup modem, I also see no means of getting online. My modem is an HDAUDIO Soft Data Fax Modem with Smart CP,manufactured by CXT (Conexant Systems Inc., file version 4.0.13.0, and the driver version is 7.58.0.0). I am an advanced computer user, but I am not a programmer. I seek a solution that is user-friendly for normal people, something equivalent to a driver that I can easily install or activate that will allow Ubuntu to see my hardware and get me connected. Can anyone help me over this hopefully-little glitch My processor is a Mobile AMD Sempron Processor 3500+ at 1.80 GHz, 1.50 GB RAM, and a 32-bit Operating System.

  Read the article

• Hard Disk Not Counting Reallocated Sectors

  - by MetaNova

  I have a drive that is reporting that the current pending sectors is "45". I have used badblocks to identify the sectors and I have been trying to write zeros to them with dd. From what I understand, when I attempt writing data directly to the bad sectors, it should trigger a reallocation, reducing current pending sectors by one and increasing the reallocated sector count. However, on this disk both Reallocated_Sector_Ct and Reallocated_Event_Count raw values are 0, and dd fails with I/O errors when I attempt to write zeros to the bad sectors. dd works fine, however, when I write to a good sector. # dd if=/dev/zero of=/dev/sdb bs=512 count=1 seek=217152 dd: error writing ‘/dev/sdb’: Input/output error Does this mean that my drive, in some way, has no spare sectors to be used for reallocation? Is my drive just in general a terrible person? (The drive isn't actually mine, I'm helping a friend out. They might have just gotten a cheap drive or something.) In case it is relevant, here is the output of smartctl -i : Model Family: Western Digital Caviar Green (AF) Device Model: WDC WD15EARS-00Z5B1 Serial Number: WD-WMAVU3027748 LU WWN Device Id: 5 0014ee 25998d213 Firmware Version: 80.00A80 User Capacity: 1,500,301,910,016 bytes [1.50 TB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Fri Oct 18 17:47:29 2013 CDT SMART support is: Available - device has SMART capability. SMART support is: Enabled UPDATE: I have run shred on the disk, which has caused Current_Pending_Sector to go to zero. However, Reallocated_Sector_Ct and Reallocated_Event_Count are still zero, and dd is now able to write data to the sectors it was previously unable to. This leads me with several other questions: Why aren't the reallocations being recored by the disk? I'm assuming the reallocation took place as I can now write data directly to the sector and couldn't before. Why did shred cause reallocation and not dd? Does the fact that shred writes random data instead of just zeros make a difference?

  Read the article

• How to host multiple FLEX applications in IIS7

  - by Devtron

  Hello, I manually deploy a FLEX application to my web server (IIS 7). There are two virtual directories, 1.) Default 2.) myFlexApp1. myFlexApp1 is where my working FLEX application resides. I now need to deploy a different FLEX application (let's call it myFlexApp2) to the same web server. I set up a virtual directory for [myFlexApp2] and it complains about the "bindings" using port 80, which is already used by [myFlexApp1]. I have tried to give them separate host names in their bindings properties. For example, myFlexApp1.mydomain.com and myFlexApp2.mydomain.com. I can never get [myFlexApp2] to show from an external browser. I was able to get only one or the other to display, but never could run both. Here is what I need: myFlexApp1.mydomain.com -- myFlexApp1 calendar.mydomain.com -- myFlexApp2 test.mydomain.com -- myFlexApp1 where test.mydomain.com is the default URL. Is this possible? What am I doing wrong? I even tried to edit the hosts file in [C:\Windows\System32\drivers\etc] but that didnt work either. How can I serve up two FLEX applications on IIS 7? It shouldn't be this hard!

  Read the article

• Parking domains and avoiding so called "search engine penalities"

  - by senthilkumar-c

  I have purchased two domains from one particular registrar and hosting from GoDaddy. Assume they are domain1.com and domain2.com Assume my hosting IP address is 111.111.111.111 I added both domain1.com and domain2.com in my domain management control panel and gave the same two nameservers for both domains at my registrar's control panel. So, now, both domains should show the same website. When I ping "domain1.com" or "domain2.com" the results say - Pinging domain1.com [111.111.111.111] with 32 bytes of data: Pinging domain2.com [111.111.111.111] with 32 bytes of data: respectively. So, they both point to the same hosting IP. BUT, internally, I have configured IIS to point them to different folders so that different websites are shown. (My hosting plan is expensive and I intend to use the space and bandwidth for many websites). But still, technically, all domains point to same IP address. Is this a bad thing? Is this what is called "domain parking"? I read some search engine forum posts that two domains pointing to the same IP/Website will be penalised by search engines and stuff. I have also read that simply "parking" the domains won't attract penality. I don't know whether what I have done is parking or the so called "wrong" thing. Can someone shed light on what I have done and what I should do? I don't want to be blacklisted by any search engine. P.S. I know this is not a search engine forum, but I am new to website hosting and domains and I am very weak in nearly all technical terms and concepts relating to web hosting and domains. I thought this will be a good place to understand these things.

  Read the article

• How to configure a large mtu (linux)

  - by Somejan

  I have a gigabit ethernet connection from my laptop to my router, and a working ipv6 connection to the internet. I can receive very large packets from sites on the internet, with sizes up to at least 10000 bytes (according to wireshark). (edit: turns out to be linux's 'generic receive offload') However, when trying to send anything, my local computer fragments at just below 1500 bytes for ipv6. (On ipv4, I can send tcp packets to the internet of at least 1514 bytes, I can ping with packets up to the configured mtu of 6128 but they are blackholed.) I'm on ubuntu 12.04. I have configured an mtu for my eth0 of 6128 (the maximum it accepts), both using ip link set dev eth0 mtu 6128 and in the NetworkManager applet gui, and restarted the connection. ip link show eth0 shows the 6128 mtu is indeed set. ip -6 route shows that none of the paths the kernel knows about have an mtu set. I can ping over ipv4 with packets up to 6128 bytes (though I don't get responses), but when I do ping6 myrouter -c3 -s1500 -Mdo I get error replies from my own computer saying that the packets are too large and the mtu is 1480. I have confirmed with Wireshark that nothing is put on the wire, and the replies are indeed generated by my own computer. So, how do I get my computer to use the larger mtu?

  Read the article

• Lion MacBook Pro will not load webpages with DNS just after wake

  - by NReilingh

  I'm working with a 2011 MacBook Pro running Lion (10.7.2), that after waking from sleep (i.e. opening the lid) takes an inordinately long amount of time (2-3 minutes or more) to get a usable internet connection. Upon waking, the wi-fi icon signifies it is negotiating a network connection, and completes one a few seconds later. At this point, network diagnostics will not show any issues, and everything in Network preferences looks as normal: I'm connected to the proper network, have the right IP address and gateway, and DNS settings are correct. However, any site accessed with a domain name (like http://www.google.com) in Safari will return the "You are not connected to the Internet." error. Accessing a site directly, say, with Google's 74.125.226.212, is successful. Yet, Network Diagnostics will insist that DNS is functioning properly. After a few minutes, the following lines will be printed to the Console log, and regular behavior will be restored. 11/18/11 8:11:31.288 PM airportd: _doAutoJoin: Already associated to “Wireless”. Bailing on auto-join. 11/18/11 8:11:32.000 PM kernel: en1: BSSID changed to 00:25:9c:63:91:bd This behavior occurs only when waking from sleep--not when turning wi-fi on and off. This problem also occurs when using a wired Ethernet connection. As per this thread, I have tried flushing the DNS cache and wiping the wireless network from memory (it's not a protected network). Neither have worked.

  Read the article

• Converting flv and mp4 video format to '.ogg' using FFmpeg

  - by user163906

  I have HostGator VPS server with FFmpeg installed. It allows me to convert .wmv to .flv as well as .mp4 files successfully using the following commands for flv and mp4: ffmpeg -i WantsABath.wmv -b 600k -r 24 -ar 22050 -ab 96k WantsABath.flv ffmpeg -i WantsABath.wmv WantsABath.mp4 but it won't allow me to convert any file format to .ogg. I tried using the command: ffmpeg -i input.mp4 -acodec libvorbis -vcodec libtheora -f ogv output.ogv by mondain but no luck with it. I am doubting that my VPS doesn't have libtheora installed. I tried configuring it by using SSH but I don't know how to make sure if it is installed or not. I tried checking with php_info but can't find anything regarding libtheora. Here's my FFmpeg version: FFmpeg version SVN-r19795, Copyright (c) 2000-2009 Fabrice Bellard, et al. configuration: --enable-libmp3lame --enable-libvorbis --disable-mmx --enable-shared --prefix=/usr/ --enable-gpl libavutil 50. 3. 0 / 50. 3. 0 libavcodec 52.35. 0 / 52.35. 0 libavformat 52.38. 0 / 52.38. 0 libavdevice 52. 2. 0 / 52. 2. 0 libswscale 0. 7. 1 / 0. 7. 1 This details doean't show libtheor Can anyone please suggest me something?

  Read the article

< Previous Page | 693 694 695 696 697 698 699 700 701 702 703 704  | Next Page >