Search Results

Search found 73994 results on 2960 pages for 'computer help'.

Page 71/2960 | < Previous Page | 67 68 69 70 71 72 73 74 75 76 77 78  | Next Page >

  • Installing linux on computer with Marvell adapter

    - by Seth
    I recently reinstalled my computer and decided that I want to have a native installation of linux side by side with windows (got tired of VMWare). The thing is upon installation (debian) everything goes fine until the disc detection section - linux can't find my western digital 1TB drive (IDE mode). I don't have the installation disc with me now, but I think that when i changed the mode to AHCI everything worked, though Windows couldn't boot so this is not an option. I have a Marvell 91xx controller. Any ideas?

    Read the article

  • Synergy stopped moving cursor over to client computer (config worked previously)

    - by crazedgremlin
    I am using QuickSynergy on OSX on my client computer and the standard Synergy program on Windows. I had a configuration that worked two days ago when I last used it, but today I came into work and it wasn't working. The odd thing is that the server shows that the client connects: NOTE: started server, waiting for clients NOTE: accepted client connection NOTE: client "danbook.local" has connected It's just that the cursor won't move to the other screen. The only change in either of my systems was that I added 4GB of RAM to the client, though that seems unimportant. What might cause this to happen?

    Read the article

  • Reset disk does not work for different model of computer

    - by dato
    I've created a reset USB disk on my HP computer, with Windows 7 Ultimate 32-bit, and it works fine. However, it does not work for Acer computers (notebooks too), so what is the problem here? I've have created it for the same user named user, and the password is exactly the same as well. Is it possible to show the language bar with a keyboard shortcut at the logon screen in Windows 7? I know I can do it through Control Panel, but I can't log into the system. When I click Reset Passwword, it shows me my USB flash drive and says that the password hint is on this USB drive. Then I click Next and type the new passwword, then confirm this new password, but an error dialog is shown. It says that an error occured when trying to change the password for this user-

    Read the article

  • need help setting up a VPN for remote computer connection

    - by Chowdan
    I am on a low budget right now. I am currently in the process of starting a computer company. I am in need of a VPN network so I can run Dameware tools for working on customers/partners computers remotely. I will be working with Windows and some Apple and linux machines. I have desktop with an AMD Phenom II 965BE(currently running stable at 3.8Ghz) processor with 8 GB of ram and a radeon hd 6870(i know graphics aren't too useful) and about 1.5TB of HDD space. I am attempting to create a network out of my office based all on one machine that would also be secure for me to remotely connect to my partners computers so when they have issues I would be able to connect and do the diagnosing and repairs remotely. What types of servers besides a VPN server would i need to create this? I have access to all Microsoft products so I can run Windows Server 2012, Windows Server 2008 R2, or any other Microsoft Software. thanks for the help all

    Read the article

  • Why won't my computer turn off?

    - by kinglime
    I have recently replaced my old Corsair TX650M PSU with a new CoolerMaster Silent Pro Gold 800w PSU. With the old PSU when I turned off my computer from windows it would shut down and everything would turn off. The lights would turn off and the fans would stop turning. With my new power supply when I shut down windows It shows the usual shutting down dialog then my two monitors say "no signal" and turn off. The weird part however is that the lights stay on and the fans continue spinning forever until I manually hold the power button in for 4 seconds then finally everything shuts off. How can I emulate the previous behavior?

    Read the article

  • Computer restarts infinitely after Bios/Motherboard screen

    - by user13176
    Like every morning I turn on my computer (which is kinda new and only couple months old) and I never had any issue with it until now. It starts booting, shows that very first screen which has some motherboard picture and stuff and then it show which buttons to press to enter BIOS and etc. Then it suddenly restarted and after that just kept restarting every 3-5 seconds forever. What could that be? I unplugged power cable, checked all the cables, moved a case, it had some wires stuck under it, blew some dust (but didn't open the case yet) and I tried to boot again and it booted successfully and I am writing this issue now. My specs: i3-3220 3.30Ghz 8GB DDR3 RAM 1TB HDD GeForce GTX 650 Windows 8 x64 I also recently upgraded my security software (that's the most recent thing I did) and it includes ZoneAlarm firewall, Comodo Antivirus and Spybot Search & Destroy. But maybe it doesn't have anything to do with this. Cheers

    Read the article

  • A script so that you don't forget your usb drive on a public computer

    - by Ava Gailliot
    So I have a problem because I'm an idiot. I seem to always leave my usb drives in public computers at school and the like. I unmount them and log off leaving them still in the pc, and of course I then lose my information and my drive which can be costly. Is there a small script somewhere that I can install to my drive that prompts me to take out my usb stick when I log off of a computer? Since this is mostly for use with public computers I can't put anything on my drive that will later need some sort of admin permissions. I guess if all else fails I'll probably put my drive on a lanyard and keep it around my wrist. lol. Does anyone else have this problem?

    Read the article

  • Why doesn't HDDlife® work onmy computer?

    - by Chenthurij
    Why doesn't HDDlife® work on my computer? Instead, it displays the message that no disks are found. First, make sure that you use the latest drivers for your system. We encountered compatibility problems with the following drivers: Intel Application Accelerator, nVidia nForce platform drivers, and VIA 4-in-1. But, all these problems are fixed in the latest versions of the drivers. To be safe, download the most recent version from the manufacturer's site and install it. HDDlife® supports only IDE and Serial ATA disks, but does not support RAID disks. IS it correct way?

    Read the article

  • Very uneven CPU utilization with SQL Server 2012 on 2 processor computer with 16 cores / processor

    - by cooplarsh
    After installing SQL Server Enterprise 2012 with the Server + Cal license model, on a computer with 2 processors each with 16 cores (and no hyperthreading involved) and putting the server under extremely heavy load the 16 cores on the first processor were very underutilized, the first 4 cores on the 2nd CPU were heavily utilized, and the last 12 cores were not used at all (because of the 20 core limit for this sql server version). Total CPU utilization was displaying as around 25%. Unfortunately, the server suffered from extremely poor performance even though if the tasks were evenly distributed across the 20 cores it wouldn't have been anywhere near as bad. The Windows Server was running on a VMWare virtual image under ESX Server, but all of the CPU was allocated to the windows server. We tried changing affinity settings (e.g., allocating most cores to CPU and the others to I/O), but that didn't help solve the performance problems. Upgrading the product edition to SQL Server Enterprise Core 2012 not only allowed the SQL Server to utilize the 12 previously unused cores on the 2nd processor, but it also resulted in a much more even distribution of tasks across all of the processors. To get through the backlog of requests cpU utilization jumped to around 90%, and then came down to around 33% once it was caught up, but performance improved dramatically since we failed over to the newly updated version And the performance issues went away. I was wondering if anyone knows what might cause SQL Server to unevenly distribute the load, relying almost exclusively on the first 4 cores of the 2nd processor that had 12 cores idle, and allocate only a few tasks to each of the 16 cores on the first processor. Also, is there any way we could have more evenly distributed the load across the 20 cores that were being used without the product edition upgrade? The flip side of that question is what did the product upgrade do that caused SQL Server to start evenly distributing the load across all of the cores that it recognized? Thanks to any insight to answer these questions and/or links that might help me better understand how to make sense of what was happenings.

    Read the article

  • what differs a computer scientist/software engineer to regular people who learn programming language and APIs?

    - by Amumu
    In University, we learn and reinvent the wheel a lot to truly learn the programming concepts. For example, we may learn assembly language to understand, what happens inside the box, and how the system operates, when we execute our code. This helps understanding higher level concepts deeper. For example, memory management like in C is just an abstraction of manually managed memory contents and addresses. The problem is, when we're going to work, usually productivity is required more. I could program my own containers, or string class, or date/time (using POSIX with C system call) to do the job, but then, it would take much longer time to use existing STL or Boost library, which abstract all of those thing and very easy to use. This leads to an issue, that a regular person doesn't need to get through all the low level/under the hood stuffs, who learns only one programming language and using language-related APIs. These people may eventually compete with the mainstream graduates from computer science or software engineer and call themselves programmers. At first, I don't think it's valid to call them programmers. I used to think, a real programmer needs to understand the computer deeply (but not at the electronic level). But then I changed my mind. After all, they get the job done and satisfy all the test criteria (logic, performance, security...), and in business environment, who cares if you're an expert and understand how computer works or not. You may get behind the "amateurs" if you spend to much time learning about how things work inside. It is totally valid for those people to call themselves programmers. This makes me confuse. So, after all, programming should be considered an universal skill? Does programming language and concepts matter or the problems we solve matter? For example, many C/C++ vs Java and other high level language, one of the main reason is because C/C++ features performance, as well as accessing low level facility. One of the main reason (in my opinion), is coding in C/C++ seems complex, so people feel good about it (not trolling anyone, just my observation, and my experience as well. Try to google "C hacker syndrome"). While Java on the other hand, made for simplifying programming tasks to help developers concentrate on solving their problems. Based on Java rationale, if the programing language keeps evolve, one day everyone can map their logic directly with natural language. Everyone can program. On that day, maybe real programmers are mathematicians, who could perform most complex logic (including business logic and academic logic) without worrying about installing/configuring compiler, IDEs? What's our job as a computer scientist/software engineer? To solve computer specific problems or to solve problems in general? For example, take a look at this exame: http://cm.baylor.edu/ICPCWiki/attach/Problem%20Resources/2010WorldFinalProblemSet.pdf . The example requires only basic knowledge about the programming language, but focus more on problem solving with the language. In sum, what differs a computer scientist/software engineer to regular people who learn programming language and APIs? A mathematician can be considered a programmer, if he is good enough to use programming language to implement his formula. Can we programmer do this? Probably not for most of us, since we specialize about computer, not math. An electronic engineer, who learns how to use C to program for his devices, can be considered a programmer. If the programming languages keep being simplified, may one day the software engineers, who implements business logic and create softwares, be obsolete? (Not for computer scientist though, since many of the CS topics are scientific, and science won't change, but technology will).

    Read the article

  • ORA- 01157 / Cant connect to database

    - by Tom
    Hi everyone, this is a follow up from this question. Let me start by saying that i am NOT a DBA, so i'm really really lost with this. A few weeks ago, we lost contact with one of our SID'S. All the other services are working, but this one in particular is not. What we got was this message when trying to connect ORA-01033: ORACLE initialization or shutdown in progress An attempt to alter database open ended up in ORA-01157: cannot identify/lock data file 6 - see DBWR trace file ORA-01110: data file 6: '/u01/app/oracle/oradata/xxx/xxx_data.dbf' I tried to shutdown / restart the database, but got this message. Total System Global Area 566231040 bytes Fixed Size 1220604 bytes Variable Size 117440516 bytes Database Buffers 444596224 bytes Redo Buffers 2973696 bytes Database mounted. ORA-01157: cannot identify/lock data file 6 - see DBWR trace file ORA-01110: data file 6: '/u01/app/oracle/oradata/xxx/xxx_data.dbf' When all continued the same, I erased the dbf files (rm xxx_data.dbf xxx_index.dbf), and recreated them using touch xxx_data.dbf. I also tried to recreate the tablespaces using `CREATE TABLESPACE DATA DATAFILE XXX_DATA.DBF` and got Database not open As I said, i don't know how bad this is, or how far i'm from gaining access to my database (well, to this SID at least, the others are working). I would imagine that a last resource would be to throw everything away, and recreating it, but I don't know how to, and I was hoping there's a less destructive solution. Any help will be greatly appreciated . Thanks in advance.

    Read the article

  • SQL Server 2005 to 2008 DB attach elp please!

    - by Brandon
    I have SQL Server 2005 Standard on my personal machine. I created a very big DB about 21 gb. I made a backup and transferred the .bak file via an ftp program to my dedicated server. I have SQL Server 2008 Enterprise Edition on my dedicated server. I tried restore the transferred .bak file but got an error. I posted the error on here and was told the database is corrupt. How? I don't know. The connection was not interrupted during the ftp transfer. The DB works on my own machine. So then I detached the db on my own machine and transferred the mdf and ldf file to my dedicated server through ftp again and again there were not interruptions. Now I try to attach the db and get this error: The header for file 'DB.mdf' is not a valid database file header. The FILE SIZE property is incorrect. (Microsoft SQL Server, Error: 5172) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=10.00.1442&EvtSrc=MSSQLServer&EvtID=5172&LinkId=20476 I already wasted 21 gb transferring the .bak file. Now I used another 21 to transfer mdf and additional ldf file. Please tell me there's a solution. The db can detach and attach fine on my machine in sql server 2005 but not SQL server 2008 on my server.

    Read the article

  • Computer specs for a large database

    - by SpeksETC
    What sort of computer specs (CPU, RAM, disk speed) should I use for running queries on a database of 200+ million records? The queries are for a research project, so there is only one "user" and only one query will be running at a time. I tried it on my own laptop with SQL Server with an i3 processor, 2GB RAM, 5400 RPM disk and a simple query didn't finish even after 8+ hours. I have an option to connect a SSD via eSata and upgrade to 4GB RAM, but not sure if this will be enough... Thanks! Edit: The database is about 25 GB and the indexes are not setup properly. When I tried to add an index, I let it run for about 8 hours and it still hadn't finished so I gave up. Should I have more patience :)? In general, the queries will run once in a while and its ok even if it takes a couple hours to complete.... Also, the queries will produce probably about 10 million records which I need to process using Stata/Matlab and I'm concerned that my current laptop is not strong enough, but unsure of the bottleneck....

    Read the article

  • Computer randomly freezes when playing games

    - by TutorialPoint
    My computer just randomly freezes when playing certain games. It has happened to me in Battlefield: Bad Company 2, Call of Duty 4, and Blacklight: Retribution. It has not happened to me with other games like Tribes: Ascend yet, which leads me to believe it is a software-side issue related to maybe DirectX or PhysX? Also, temperatures seem stable. I used RivaTuner combined with MSI Afterburner, and at the time of freezing with BF:BC2, it gives: 62C, 67% GPU usage and 78.8FPS. During the session the max I have seen was 65C and 97% GPU usage. On Blacklight: Retribution, I've heard other people complain about the problem too. This is why it is such a mystery to me, is this actually a driver problem, or more a game problem? I've been able to play these games for long until I re-installed Windows 7 (because it was growing too full and slow). Before I had a 32bit Ultimate version, and now 64bit. Specs: O/S: Windows 7 64bit Ultimate CPU: Intel i5-750 @ Default 2.66 GHz GPU: ASUS EAH5770 1GB PSU: CoolerMaster Real Power M520 (520W) MB: Gigabyte P55M-UD2 Catalyst Control Center version (in "About"): 2012.0214.2218.39913

    Read the article

  • File transfer from MP3 player to computer

    - by JP
    I own an old 20GB Creative Zen jukebox (all external screws are gone on it LOL) and I would like to transfer files back to my PC to get them on my new iPod. Problem is, no matter what software I use (WinAMP, Creative Media Source or Windows Media Player), it just stops transferring files on my HD with an error message that says there is no more space on the destination folder. Problem is, there is still 320GB free. I tried lot of things like installing newer driver, latest Zen plug-in for Media Source, latest WinAMP version. Sometimes, it just works and then again, it stops working and I get this non-sense error. Restarting my PC sometime solves the issue by giving me enough time to transfer 10 or 15 more files and then I get the error again and again. Yesterday though I managed to transfer up to 3GB of MP3s on my computer before getting the error. Seems like I'm having a driver issue or a weird behavior from the player and/or the software I'm using. 3 different software can't reproduce the exact same issue by themselves so it must be something related to the driver. I can't find any post of any sort concerning such issue on old forums. Any idea?

    Read the article

  • Computer does not switch on after power outage

    - by cristian
    VOLTAGE DROP OFF FOR PC does not restart The other day my pc was turned off due to power outage. Since that time the computer would not turn on again, no sign of life, it seems dead. I did several tests, changed the power outlet and disconnect the wires ... also I have reseated the cards ... but the result is that nothing changes. What can I do? Could there may be damage to the hardware due to the power outage? Note: the voltage drop is not due to a lightning storm and so is not due to damaged components (burnt card etc ...) Original Text: l'altro giorno il pc mi si è spento improvvisamente per calo tensione.... da quel momento non si è piu' riacceso...nessun segnale di vita...sembra proprio morto. Ho fatto diverse prove, cambio presa di alimentazione, scollegare i fili...insomma ho "mischiato le carte"...ma il risultato è che non cambia nulla. Cosa posso fare? cosa puo' essere successo? Possono esserci danni hardware per il calo di tensione? NB: il calo di tensione non e' dovuto ad una saetta e quindi escluderei danni causa temporale (bruciature scheda ecc...) Grazie mille

    Read the article

  • Give back full control to a user on a disk from another computer

    - by Foghorn
    I have my friend's hard drive mounted externally. After messing with the permissions with TAKEOWN so I could fix some viruses, I have full control over their drive. The problem is, now it's stuck in a "autochk not found" reboot sequence. I think the problem is that the boot sector is invisible to the drive now. So my question is, How can I use icacls to give back the full ownership, when the user I am giving it to is not on my machine? I ran the TAKEOWN command from my windows 7 laptop, their machine is a windows xp Professional with three partitions, I only altered the one that has the boot sector. Here is the permissions that icacls shows: (Where my computer is %System% my username is ME, and the drive is E:\ C:\Users\ME icacls E:\* E:\$RECYCLE.BIN %System%\ME:(OI)(CI)(F) Mandatory Label\Low Mandatory Level:(OI)(CI)(IO)(NW) E:\ALLDATAW %System%\ME:(I)(OI)(CI)(F) E:\alrt_200.data %System%\ME:(OI)(CI)(F) E:\AUTOEXEC.BAT %System%\ME:(OI)(CI)(F) E:\AZ Commercial %System%\ME:(I)(OI)(CI)(F) E:\boot.ini %System%\ME:(OI)(CI)(F) E:\Config.Msi %System%\ME:(I)(OI)(CI)(F) E:\CONFIG.SYS %System%\ME:(OI)(CI)(F) E:\Documents and Settings %System%\ME:(I)(OI)(CI)(F) E:\IO.SYS %System%\ME:(OI)(CI)(F) E:\Mitchell1 %System%\ME:(I)(OI)(CI)(F) E:\MSDOS.SYS %System%\ME:(OI)(CI)(F) E:\MSOCache %System%\ME:(I)(OI)(CI)(F) E:\NTDClient.log %System%\ME:(OI)(CI)(F) E:\NTDETECT.COM %System%\ME:(OI)(CI)(F) E:\ntldr %System%\ME:(OI)(CI)(F) E:\pagefile.sys %System%\ME:(OI)(CI)(F) E:\Program Files %System%\ME:(I)(OI)(CI)(F) E:\RECYCLER %System%\ME:(I)(OI)(CI)(F) E:\RHDSetup.log %System%\ME:(OI)(CI)(F) E:\System Volume Information %System%\ME:(I)(OI)(CI)(F) E:\WINDOWS %System%\ME:(I)(OI)(CI)(F) Successfully processed 22 files; Failed processing 0 files C:\Users\ME

    Read the article

  • Picking a linux compatible motherboard

    - by Chris
    Last time I bought a new computer (I build them myself) I got a motherboard that had really poor linux support for a long time. Specifically the audio. I had to wait months before the kernel supported the on board audio chipset. That is exactly the situation I'm trying to avoid this time around. I have some specific questions about "server motherboards" actually. I looked at a few models of server motherboards by intel, and some random models on newegg. I wasn't able to see much of a difference from regular desktop motherboard other than most had two sockets, and support for much more ram. These boards seem more popular with Linux users. Why? AMD and Intel both have server CPUs as well. Some question, what's the difference? To make this question more concrete, I was looking at this this motherboard. The main questions about it that I can't answer are: Can I get a motherboard without on board raid and audio? I wanted to get a hardware raid controller and a PCI audio card. I thought a server motherboard would be cheaper and not have these "extras", since who wants an audio card on a server? Where can I found out about Linux support for the components on this board? "Intel ICH10R", "Realtek ALC889", "Marvell 88E8056" I'm buying this computer to work as a Linux desktop for a lot of compiling, coding and audio/video work, but I don't want to rule out the possibility of installing windows and playing some games at one point. (even if the last game I got has been sitting in its box unopened for almost a year). Is it a good idea to buy a "server motherboard" and play games on it, or are desktop boards better value for this? The ultimate solution for me would be a motherboard that had GPL divers for onboard LAN, a single CPU socket, lots of PCI express and PCI. USB 3.0, and no fancy hard disk controllers since I'll be getting a separate one.

    Read the article

  • New Computer won't boot up

    - by Reggie
    I brought new components and put a computer together. I installed win7(32bit) and everything was working as it should. However my case came with two USB3 front ports I could not connect because of motherboard did not support USB3, so I swapped out the board for a new motherboad with USB3 connection. Now I put everything back together but it won't bootup. "Memory Ok" light stay on. Motherboad LED is on. There is power, all fans are on but I got no display. There is no activity in back of the systems, none of the peripheral connection in the back are working. I have tried the following but to no avail. Reboot multiple times Unplug power and plug the power back Reset the CMOS battery..let it stays out for 10 minutes or more. Unplug all peripheral device but no luck Reset memory..... nothing happen The only thing I did not do was remove the cpu...but I unplug everything else. Please help, thank you.

    Read the article

  • Shared printer stops working on clients but not host computer

    - by Tony
    I have a Brother MFC-7420 USB all-in-one laser printer. It is plugin via USB to my Windows 7 x64 machine. I have it shared to a few users on my home network. My wife's laptop running Vista x64 can normally print fine to the printer. However it seems that every day or two, when she pushes print on a something it just sits in her laptop's print queue and never makes it to my desktop. The only thing that seems to fix this is if she restarts her laptop. Not a big deal but this problem is sort of annoying. I don't know if this affects but the laptop is put into hibernate at night and I turn my desktop off at night. Does anyone know why this happens and if there is something easy to do to fix the problem besides restart the computer? EDIT: I was thinking that maybe my wife's laptop loses its connection to the printer. Is there a way to reset a connection to a shared printer? Or maybe reauth with the printer?

    Read the article

  • DMG mounting warning message says "it may make computer less secure or cause other problems"

    - by Cawas
    When I try to open a DMG file I get this: I'll just transcript the image: There may be a problem with this disk image. Are you sure you want to open it? Opening this disk image may make your computer less secure or cause other problems. What does that mean in fact? What's really wrong with it, and what kind of problem can it cause just by mounting? Someone said: When you download a file in Leopard (and Snow Leopard), it's marked as a quarantined file. This occurs by the OS adding an attribute to the file, tagging where it came from (such as "downloaded by Safari"). This is what causes the user to see prompts when running files that were downloaded from the Internet, you may remember being asked to confirm you'd like to launch program XXX downloaded by Safari on XXX date. As a new part of Snow Leopard, files which are tagged with the quarantine attribute also have integrity checked by fsck, and if that verify fails you will see the message you described, triggered by an unused node in the disc image. But really, I didn't get that. What's quarantine? I've just downloaded a file here on SL, tried to open, and got that warning. Apple have a say about quarantine files, and they seem to work the same on Leopards. Plus I have got that file using Google Chrome while that feature seems to work just with Safari.

    Read the article

  • Linux Mint 13 is not booting on dual boot computer

    - by Brian
    thanks in advance for your time. I have 2 hard drives in my computer a 300 GB drive which is my primary drive for windows 7 and a 1.5 TB drive that I'd used for storage. When I got it I partitioned 500 GB for use in Linux. So, I created a bootable USB and clicked the "Install by Current Operating System" option from Mint. It installed it to the free 500 GB like I'd hoped it would. Now, I can't get it to boot though. I've tried using EasyBCD to create the boot entry and it hangs on a black screen. Thanks. EDIT @ Ryhuk It presents a menu with two options 1) Windows and 2) Mint. This was a menu I created with easyBCD. When I select option 1 it boots to windows fine. When I select option 2 it hangs on a black screen with just a white bar flashing (Can't remember what its called, it marks the current cursor location on a text field) and won't respond to any key presses but alt ctrl del.

    Read the article

  • picking a linux compatable motherboard

    - by Chris
    Last time I bought a new computer (I build them myself) I got a motherboard that had really poor linux support for a long time. Specifically the audio. I had to wait months before the kernel supported the on board audio chipset. That is exactly the situation I'm trying to avoid this time around. I have some specific questions about "server motherboards" actually. I looked at a few models of server motherboards by intel, and some random models on newegg. I wasn't able to see much of a difference from regular desktop motherboard other than most had two sockets, and support for much more ram. These boards seem more popular with Linux users. Why? AMD and Intel both have server CPUs as well. Some question, what's the difference? To make this question more concrete, I was looking at this this motherboard. The main questions about it that I can't answer are: Can I get a motherboard without on board raid and audio? I wanted to get a hardware raid controller and a PCI audio card. I thought a server motherboard would be cheaper and not have these "extras", since who wants an audio card on a server? Where can I found out about Linux support for the components on this board? "Intel ICH10R", "Realtek ALC889", "Marvell 88E8056" I'm buying this computer to work as a Linux desktop for a lot of compiling, coding and audio/video work, but I don't want to rule out the possibility of installing windows and playing some games at one point. (even if the last game I got has been sitting in its box unopened for almost a year). Is it a good idea to buy a "server motherboard" and play games on it, or are desktop boards better value for this? The ultimate solution for me would be a motherboard that had GPL divers for onboard LAN, a single CPU socket, lots of PCI express and PCI. USB 3.0, and no fancy hard disk controllers since I'll be getting a separate one.

    Read the article

  • Window 7 Computer name changing on its own?

    - by DC
    Very odd problem... I have a Dell Latitude D830 with XP Pro that has been running on my local domain for many years. I recently Installed Windows 7 Enterprise on the D830 using a brand new HDD so that I could still use XP if I needed by just swapping out the HDD's. I added the W7 installed system to my domain using a completely different machine name than that used for the XP system and everything seemed to be functioning as it should. On boot up over the last 2 weeks or so I occasionally (3 times now) get to the login screen and try to login to the domain only to get an error saying that the Computer name is not a trusted machine in the domain I'm trying to log in to. Come to find out that the machine name on the W7 system has been changed somehow to that of my old XP system. If on the W7 system I then change the name back to the correct name, disjoin the domain, reboot, add the machine back into the domain … all is well for an unknown period of time until this happens again. This last time, I know for a fact that everything was fine the day before when I shut down the system. I came in today, powered up the system and the machine name had been changed to that of my old XP system again. Has anybody else seen this behavior or hav any ideas on what could be causing it? Thanks!

    Read the article

< Previous Page | 67 68 69 70 71 72 73 74 75 76 77 78  | Next Page >