general purpose - Page 71

Tips to increase performance of a Windows computer

- by Niyaz

What are some general guidelines to increase the speed/performance of my Windows machine?

What is the best windows tool to capture HTTP traffic?

- by Omar Shahine

When you want to capture browser traffic or general windows HTTP traffic what tool do you use?

Strange DNS problem [seems to be IPv6 issue]

Hi, I'm experiencing strange problems with my Kubuntu 9.10 when doing DNS requests from various applications. The requests are extremely slow, so loading any pages in Firefox or Konqueror, doing package installations in Kpackagemanager and other apps is really painful, while for example Opera doesnt have any problems, and ping is normally fast as well for DNS pings. I checked the proxy settings of both the used applications as well as of the general system and there are none, so to me it doesn't seem as there was something inbetween.. Does anybody have an idea on what to check for possible problem sources or how to solve this ? I'm behind a DSL home router which does the DHCP (and works well with my other computer). Any kind of advice would be really helpful. Edit: It seems to be some kind of IPv6 problem, as I could get it to work by disabling IPv6 explicitly in Firefox. Is there a general solution to this ?

Read the article

CPU load, USB connection vs. NIC

- by T.J. Crowder

In general, and understanding the answer may vary by manufacturer and model (and driver, and...), in consumer-grade workstations with integrated NICs, does the NIC rely on the CPU for a lot of help (as is typically the case with a USB controller, for instance), or is it fairly intelligent and capable on its own (like, say, the typical Firewire controller)? Or is the question too general to answer? (If it matters, you can assume Linux.) Background: I'm looking at connecting a device (digital television capture) that will be delivering ~20-50 Mbit/sec of data to a somewhat under-powered workstation. I can get a USB 2 High-speed device, or a network-attached device, and am interested in avoiding impacting the CPU where possible. Obviously, if it's a 100Mbit NIC, that's roughly half its theoretical inbound bandwidth, whereas it's only roughly a tenth of the 480 Mbit/second the USB 2 "High Speed" interface. But if the latter requires a lot of CPU support and the former doesn't...

Read the article

Can not search my company howto blog site anylonger in Sharepoint

- by Worldunix

I have a Howto company Blog site that i post to for my clients to access for help. For some reason it has stopped letting anyone search on it. I can search for Mysites or users. But when you drop down the tab to search: This Site: "blog site name" you get the following reply: No results matching your search were found. Check your spelling. Are the words in your query spelled correctly? Try using synonyms. Maybe what you're looking for uses slightly different words. Make your search more general. Try more general terms in place of specific ones. Try your search in a different scope. Different scopes can have different results. I have tried the following command: from the Index server net stop osearch net start osearch iisreset /noforce But still not able to search a local blog site I can only search for users and Sites. please help Don

Read the article

Can not search my company howto blog site anylonger in Sharepoint

- by Worldunix

I have a Howto company Blog site that i post to for my clients to access for help. For some reason it has stopped letting anyone search on it. I can search for Mysites or users. But when you drop down the tab to search: This Site: "blog site name" you get the following reply: No results matching your search were found. Check your spelling. Are the words in your query spelled correctly? Try using synonyms. Maybe what you're looking for uses slightly different words. Make your search more general. Try more general terms in place of specific ones. Try your search in a different scope. Different scopes can have different results. I have tried the following command: from the Index server net stop osearch net start osearch iisreset /noforce But still not able to search a local blog site I can only search for users and Sites. please help Don

Read the article

How to integrate Windows Server 2008 R2's NPS with Cisco switches?

- by Massimo

I need to evaluate in a lab environment the use of Windows Server 2008 R2's NPS for 802.1x authentication with Cisco Catalyst 3750 switches; the general idea is to only let clients connect to the company network if they can provide valid domain logon credentials, placing them in a restricted VLAN instead if they can't. NAP would also be a bonus, but it can be evaluated later; the main point now is only 802.1x authentication. Although I have very good knowledge of Windows and Active Directory (on the Microsoft side) and quite good knowledge of Catalyst switches (on the Cisco side), I'm totally new to 802.1x; I'd really like some general guidelines and help here, and some sort of implementation guide would also be very useful.

Read the article

Puppet, Nagios, Munin on cPanel based hosts

- by WinkyWolly

I've been managing 20-30~ cPanel based hosts over the past year with Puppet, Nagios and Munin for general monitoring / trending however a lot of the methods I've had to use to deploy / manage things such as configurations a pain. For those of you who aren't familiar with cPanel - it adds a few things to yum exclude such as perl*, ruby* and so forth. This causes issues with me being able to bootstrap monitoring on a new server via Puppet (well via the Package type) due to a bunch of conflicts with installing via Yum. Now I could create a custom RPM for everything and remove certain dependencies from the spec file however I would like to avoid this if possible. Does anyone have any proposed functional ways to manage this sort of environment? Currently I install Puppet, Facter and Munin via RPM's and force install using --nodeps and such (since they're installed, just no the ones Yum wants). Nagios I installed manually from source at this time (likely will create RPM's however I want to tackle this general issue first).

Read the article

What are some "must have" Ubuntu/Linux programs?

- by wag2639

Inspired by link text, what are some programs thats must have for a developer, general desktop user, etc?

Read the article

Why you have create a full site - if the answer for everything is the one and the same ?

- by Aristos

regarding this question http://superuser.com/questions/131176/a-hidden-program-virus-send-hundred-e-mail-can-you-have-any-experience-on-som I am wondering, if everything is the same, why you have fix a so complicate site ? One simple answer can solve all ! (for you) Hope full I found answers elsewhere on internet, and this general answer did not help me almost at all. The problem there is a serious thread, special that the general answer did not give the solution - and I see and the full video on it. Please answer to this question !

Read the article

I can search users and site... but it will not search a blog that i use to view on my posted site fo

- by Don

I have always been able to search my blog where i post howtos for our company... However now i can only search for mysites or sites... when i click on a blog site that I created for Company Howtos i try to use the Search: This Site: "name of yhour site" click search i get the following No results matching your search were found. Check your spelling. Are the words in your query spelled correctly? Try using synonyms. Maybe what you're looking for uses slightly different words. Make your search more general. Try more general terms in place of specific ones. Try your search in a different scope. Different scopes can have different results. I have tried to do the following: 1) net stop osearch 2) net start osearch 3) iisreset /noforce ~ Please help! Don

Read the article

Good set of web hosting permissions?

- by Jorge Israel Peña

Hey guys, I just got a linode and I'm in the process of configuring it. It's running nginx with php-fpm and passenger. nginx was compiled and is running as user nginx. php-fpm (php with fastcgi process manager) is running as www-data (in group www-data). My sites are currently in /var/www, so for example /var/www/test.com I'm just wondering what the general 'flow' of things is. So for example, /var/www is owned by root, should I chown of /var/www/test.com to nginx or www-data? Or should I put nginx in the www-data group? How should site uploading work, I just transfer files to the /var/www/test.com directory as root (sudo) and then chown -R www-data:www-data .? Thanks. I'm capable of figuring things out on my own, I'm just wondering what the typical/general way of handling users/groups/permissions/site-files is on linux with a webserver.

Read the article

Why Standards Place Limits on Data Transfer Rates?

- by Mehrdad

This is a rather general question about hardware and standards in general: Why do they place limits on data transfer rates, and disallow manufacturers from exceeding those rates? (E.g. 100 Mbit/s for Wireless G, 150 Mbit/s for Wireless N, ...) Why not allow for some sort of handshake protocol, whereby the devices being connected agree upon the maximum throughput that they each support, and use that value instead? Why does there have to be a hard-coded limit, which would require a new standard for every single improvement to a data rate?

Read the article

Would NetBSD be a good choice for a web server?

- by Alexander

I've the choice of crafting a NetBSD image for a Xen VPS host, and was just wanting to play around as I like BSD and wished to use it for my general web hosting. I will be hosting a low-mid traffic website and maybe a few other simple services. Do you think NetBSD would be a sufficient choice, in terms of general performance of multiple system users and fair amount of traffic to Apache compared to what Linux could normally handle? I am concerned if I do start to really like it and keep it, I may be limiting myself if I am to move further with my web host and get more traffic (and maybe a lot of FTP access and user shell accounts) Ken

Read the article

Enabling Compiz Viewport Switcher key bindings

- by David Moles

I'm running compiz 0.8.2 with compizconfig on Scientific Linux 6.2 with Gnome 2.28.2. In the compizconfig "General Options" I have "Desktop Size" set as follows: Horizontal Virtual Size: 6 Vertical Virtual Size: 1 Number of Desktops: 1 This gets me the layout I want, i.e. 6 workspaces in a horizontal layout. Ctrl-alt-cursor-keys work fine for switching between them. However, I can't figure out how to get key bindings for specific workspaces. I've tried enabling "Viewport Switcher" in compizconfig, and tried various combinations both in "Number-based viewport switching" and "Go to specific viewport", to no apparent effect. My first thought was that something else was eating the specific key bindings I chose, but I think I've tried every combination of shift, control, alt and super (i.e., the Windows key) by now. I tried setting 6 desktops under "General Options" instead of one desktop with horizontal virtual size 6, but that doesn't seem to make a difference either. What am I missing?

Read the article

How do I examine my Windows firewall outbound rules?

- by David

I need a program to listen to port 9000 on localhost with my Windows firewall. I've created an outgoing and an incoming rule for my program but I can only see my incomming rule in the Windows firewall general menu? I've also noticed that I've many more outgoing rules in my outgoing rule menu but I can only see 4 outgoing rules in my general firewall menu but I see many many more incomming rules? The program doesn't listen to port 9000 or it doesn't working. I've also tried netstat -a -p to no avail. I didn't see 0.0.0.0:9000 in the output? How can I check if my program listen to port 9000 or connect to port 9000 when it's open?

Read the article

Windows terminating system processes

- by jemper

To be sure nobody will answer me with advice on not trying to terminate critical (system) processes - I'm relatively experienced in programming and Windows in general - I'd know what I'm doing so far. So there are these processes that can't be terminated with taskkill - system processes in general. But there also is, for example my Anti Virus program that makes itself "unterminateable". How can I access and mainly terminate system processes under windows? (kill.exe by Microsoft doesn't work) How do processes like anti-virus programs protect themselves? How can you turn them off again, then?

Read the article

Enabling Compiz Viewport Switcher key bindings

- by David Moles

I'm running compiz 0.8.2 with compizconfig on Scientific Linux 6.2 with Gnome 2.28.2. In the compizconfig "General Options" I have "Desktop Size" set as follows: Horizontal Virtual Size: 6 Vertical Virtual Size: 1 Number of Desktops: 1 This gets me the layout I want, i.e. 6 workspaces in a horizontal layout. Ctrl-alt-cursor-keys work fine for switching between them. However, I can't figure out how to get key bindings for specific workspaces. I've tried enabling "Viewport Switcher" in compizconfig, and tried various combinations both in "Number-based viewport switching" and "Go to specific viewport", to no apparent effect. My first thought was that something else was eating the specific key bindings I chose, but I think I've tried every combination of shift, control, alt and super (i.e., the Windows key) by now. I tried setting 6 desktops under "General Options" instead of one desktop with horizontal virtual size 6, but that doesn't seem to make a difference either. What am I missing?

Read the article

How do networking ports work? Can I configure the ports that client and server use?

- by joedotnot

Let's say i have a "server" program listening on address 1.2.3.4:69 (i.e. remote port 69) When i connect from a "client" program to it, typically i would specify the IP address + port of the target or server system; But what port would the client be using ? And how does the server know which port to connect back to the client on? I understand this question is very general, but just wanting to get a general feel for how things work. Then extending this to a specific protocol, say FTP (typical port 21), can I change it such that the server uses port 69, but the client uses port 100? And similarly, for Remote Desktop in WinXP (typical port 3389), i know how to change the server port to be something other than 3389, but how does one change what port the client uses (if at all possible)?

Read the article

Mitigating the 'firesheep' attack at the network layer?

- by pobk

What are the sysadmin's thoughts on mitigating the 'firesheep' attack for servers they manage? Firesheep is a new firefox extension that allows anyone who installs it to sidejack session it can discover. It does it's discovery by sniffing packets on the network and looking for session cookies from known sites. It is relatively easy to write plugins for the extension to listen for cookies from additional sites. From a systems/network perspective, we've discussed the possibility of encrypting the whole site, but this introduces additional load on servers and screws with site-indexing, assets and general performance. One option we've investigated is to use our firewalls to do SSL Offload, but as I mentioned earlier, this would require all of the site to be encrypted. What's the general thoughts on protecting against this attack vector? I've asked a similar question on StackOverflow, however, it would be interesting to see what the systems engineers thought.

Read the article

How do I install a language pack in Windows 7 Home Premium?

- by ekaj

Specifically, I want Korean (link), but I hope this helps other people in general. According to this page, it is only possible for Ultimate and Enterprise. Specifically, I'd like to enable my keyboard to type in Korean, and I specified Korean as the input language (Start - type "Input Languages", only result). Under the General tab, I selected Add, and specified Korean.. but it doesn't work, because the language pack isn't installed I presume. Would anyone know how to add different language input / packs to Windows 7 Home Premium? Also, I tried following this tutorial on adding a language pack to HP, but the .cab keeps disappearing so it will not work. Note: Unlike the link in the tutorial as well, I do not have an option to change the display language of Windows, only the option to change input methods.

Read the article

AD Local Admins without password sharing

- by Cocoabean

My team is building out an Active Directory environment in a small grad school with support for general computer labs, and staff/faculty machine and account management. We have a team of student consultants that are hired to do general help desk work. As of now we have a local admin account on every machine. It has the same password and all of us know it. I know it's not best practice and I want to avoid this with the new setup. We want to have local admin accounts in case there are network issues that prevent AD authentication, but we do not want this account to be generic with a shared password. Is there a way we can get each machine to cache the necessary information to authenticate a group of local admins so that if AD is somehow inaccessible, student consultants can still login with their AD admin accounts?

Read the article

Why don't they clean up the Windows folder? [on hold]

- by NeoLegends

To me, that thing seems like an utter mess, at least most parts. Some are pretty organized (.NET and GAC-Folders), but most of the others (System32) are not. Wouldn't it improve the general developer productivity if they cleaned it all up? In general - I don't know why they didn't stop that folder becoming a huge mess, and why they don't take any efforts to reduce it. (Win 8 Settings App sits in System32 while Store sits in Root directory, iirc) FHS isn't perfect, but it's far better than that...

Read the article

How to make your apache application accessible within network

- by guest

I have a Windows XP machine where I have installed WAMP and made a PHP based web application. I can access the web application from within this machine by using the browser and pointing to: http://localhost/myApp/ --- and the page loads fine. Now I want this site (http://localhost/myApp) to be accessible to all machines within the network (and may be later, to the general public as well). I am quite new to this, how do I make my site accessible to all machines within the network and to the general public in the internet? I tried modifying the httpd.conf file in Apache (WAMP) by changing Listen 80 to Listen 10.10.10.10:80 (where I replaced 10.10.10.10 with the actual IP of this windows xp machine). I also tried "Put Online" feature in WAMP. None seem to work though. How do I make it accessible?

Read the article

WiX 3 Tutorial: Understanding main WXS and WXI file

- by Mladen Prajdic

In the previous post we’ve taken a look at the WiX solution/project structure and project properties. We’re still playing with our super SuperForm application and today we’ll take a look at the general parts of the main wxs file, SuperForm.wxs, and the wxi include file. For wxs file we’ll just go over the general description of what each part does in the code comments. The more detailed descriptions will be in future posts about features themselves. WXI include file Include files are exactly what their name implies. To include a wxi file into the wxs file you have to put the wxi at the beginning of each .wxs file you wish to include it in. If you’ve ever worked with C++ you can think of the include files as .h files. For example if you include SuperFormVariables.wxi into the SuperForm.wxs, the variables in the wxi won’t be seen in FilesFragment.wxs or RegistryFragment.wxs. You’d have to include it manually into those two wxs files too. For preprocessor variable $(var.VariableName) to be seen by every file in the project you have to include them in the WiX project properties->Build->“Define preprocessor variables” textbox. This is why I’ve chosen not to go this route because in multi developer teams not everyone has the same directory structure and having a single variable would mean each developer would have to checkout the wixproj file to edit the variable. This is pretty much unacceptable by my standards. This is why we’ve added a System Environment variable named SuperFormFilesDir as is shown in the previous Wix Tutorial post. Because the FilesFragment.wxs is autogenerated on every project build we don’t want to change it manually each time by adding the include wxi at the beginning of the file. This way we couldn’t recreate it in each pre-build event. <?xml version="1.0" encoding="utf-8"?><Include>  <?define MajorVersion="1" ?> <?define MinorVersion="0" ?> <?define BuildVersion="0" ?>  <?define Revision="0" ?>  <?define VersionNumber="$(var.MajorVersion).$(var.MinorVersion).$(var.BuildVersion).$(var.Revision)" ?>  <?define UpgradeCode="YOUR-GUID-HERE" ?>  <?define ResourcesDir="$(var.ProjectDir)\Resources" ?>  <?define ExeProcessName="SuperForm.MainApp.exe" ?></Include> For now there’s no way to tell WiX in Visual Studio to have a wxi include file available to the whole project, so you have to include it in each file separately. Only variables set in “Define preprocessor variables” or System Environment variables are accessible to the whole project for now. The main WXS file: SuperForm.wxs We’ll only take a look at the general structure of the main SuperForm.wxs and not its the details. We’ll cover the details in future posts. The code comments should provide plenty info about what each part does in general. Basically there are 5 major parts. The update part, the conditions and actions part, the UI install sequence, the directory structure and the features we want to include. <?xml version="1.0" encoding="UTF-8"?><Wix xmlns="http://schemas.microsoft.com/wix/2006/wi" xmlns:util="http://schemas.microsoft.com/wix/UtilExtension">  <?include $(sys.CURRENTDIR)Includes\SuperFormVariables.wxi ?>  <Product Id="*" Name="!(loc.ProductName) $(var.VersionNumber)" Language="!(loc.LANG)" Version="$(var.VersionNumber)" Manufacturer="!(loc.ManufacturerName)" UpgradeCode="$(var.UpgradeCode)">  <Package InstallerVersion="300" Compressed="yes" InstallScope="perMachine"/> <Media Id="1" Cabinet="media1.cab" EmbedCab="yes" />  <Upgrade Id="$(var.UpgradeCode)"> <UpgradeVersion OnlyDetect="yes" Minimum="$(var.VersionNumber)" IncludeMinimum="no" Property="NEWER_VERSION_FOUND" /> <UpgradeVersion Minimum="0.0.0.0" IncludeMinimum="yes" Maximum="$(var.VersionNumber)" IncludeMaximum="no" Property="OLDER_VERSION_FOUND" /> </Upgrade>  <PropertyRef Id="NETFRAMEWORK35"/>  <Condition Message="!(loc.DotNetFrameworkNeeded)"> <![CDATA[Installed OR NETFRAMEWORK35]]> </Condition> <Condition Message="!(loc.AppNotSupported)"> <![CDATA[Installed OR ((VersionNT >= 501 AND ServicePackLevel >= 2) OR (VersionNT >= 502))]]> </Condition>  <CustomAction Id="NewerVersionFound" Error="!(loc.SuperFormNewerVersionInstalled)" /> <InstallExecuteSequence>  <Custom Action="NewerVersionFound" After="FindRelatedProducts"> <![CDATA[NEWER_VERSION_FOUND]]> </Custom>  <RemoveExistingProducts After="InstallInitialize"/>  <Custom Action="WixCloseApplications" Before="InstallInitialize" /> </InstallExecuteSequence>  <util:CloseApplication Id="CloseSuperForm" CloseMessage="no" Description="!(loc.MustCloseSuperForm)" ElevatedCloseMessage="no" RebootPrompt="no" Target="$(var.ExeProcessName)" />  <UIRef Id="WixUI_InstallDir" /> <UI>  <DialogRef Id="FilesInUse" /> <DialogRef Id="MsiRMFilesInUse" />  </UI>  <Icon Id="SuperFormIcon.ico" SourceFile="$(var.ResourcesDir)\Exclam.ico" /> <Property Id="ARPPRODUCTICON" Value="SuperFormIcon.ico" />   <Directory Id="TARGETDIR" Name="SourceDir"> <Directory Id="ProgramFilesFolder"> <Directory Id="INSTALLLOCATION" Name="!(loc.ProductName)" /> </Directory> </Directory>  <Property Id="WIXUI_INSTALLDIR" Value="INSTALLLOCATION" />  <Feature Id="SuperFormFeature" Title="!(loc.ProductName)" Level="1"> <ComponentGroupRef Id="SuperFormFiles" /> <ComponentRef Id="cmpVersionInRegistry" /> <ComponentRef Id="cmpIsThisUpdateInRegistry" /> </Feature> </Product></Wix> For more info on what certain attributes mean you should look into the WiX Documentation. WiX 3 tutorial by Mladen Prajdic navigation WiX 3 Tutorial: Solution/Project structure and Dev resources WiX 3 Tutorial: Understanding main wxs and wxi file WiX 3 Tutorial: Generating file/directory fragments with Heat.exe

Search Results

Search found 12083 results on 484 pages for 'general purpose'.

Page 71/484 | < Previous Page | 67 68 69 70 71 72 73 74 75 76 77 78 | Next Page >

- by Niyaz

- by Omar Shahine

- by Homer J. Simpson

- by T.J. Crowder

- by Worldunix

- by Worldunix

- by Massimo

- by WinkyWolly

- by wag2639

- by Aristos

- by Don

- by Jorge Israel Peña

- by Mehrdad

- by Alexander

- by David Moles

- by David

- by jemper

- by David Moles

- by joedotnot

- by pobk

- by ekaj

- by Cocoabean

- by NeoLegends

- by guest

- by Mladen Prajdic

< Previous Page | 67 68 69 70 71 72 73 74 75 76 77 78 | Next Page >