Search Results

Search found 1961 results on 79 pages for 'ideal'.

Page 71/79 | < Previous Page | 67 68 69 70 71 72 73 74 75 76 77 78  | Next Page >

• Tunnel over HTTPS

  - by ephemient

  At my workplace, the traffic blocker/firewall has been getting progressively worse. I can't connect to my home machine on port 22, and lack of ssh access makes me sad. I was previously able to use SSH by moving it to port 5050, but I think some recent filters now treat this traffic as IM and redirect it through another proxy, maybe. That's my best guess; in any case, my ssh connections now terminate before I get to log in. These days I've been using Ajaxterm over HTTPS, as port 443 is still unmolested, but this is far from ideal. (Sucky terminal emulation, lack of port forwarding, my browser leaks memory at an amazing rate...) I tried setting up mod_proxy_connect on top of mod_ssl, with the idea that I could send a CONNECT localhost:22 HTTP/1.1 request through HTTPS, and then I'd be all set. Sadly, this seems to not work; the HTTPS connection works, up until I finish sending my request; then SSL craps out. It appears as though mod_proxy_connect takes over the whole connection instead of continuing to pipe through mod_ssl, confusing the heck out of the HTTPS client. Is there a way to get this to work? I don't want to do this over plain HTTP, for several reasons: Leaving a big fat open proxy like that just stinks A big fat open proxy is not good over HTTPS either, but with authentication required it feels fine to me HTTP goes through a proxy -- I'm not too concerned about my traffic being sniffed, as it's ssh that'll be going "plaintext" through the tunnel -- but it's a lot more likely to be mangled than HTTPS, which fundamentally cannot be proxied Requirements: Must work over port 443, without disturbing other HTTPS traffic (i.e. I can't just put the ssh server on port 443, because I would no longer be able to serve pages over HTTPS) I have or can write a simple port forwarder client that runs under Windows (or Cygwin) Edit DAG: Tunnelling SSH over HTTP(S) has been pointed out to me, but it doesn't help: at the end of the article, they mention Bug 29744 - CONNECT does not work over existing SSL connection preventing tunnelling over HTTPS, exactly the problem I was running into. At this point, I am probably looking at some CGI script, but I don't want to list that as a requirement if there's better solutions available.

  Read the article

• Maintaining ViewModel fields with default model binding and failed validation

  - by TonE

  I have an ASP.Net MVC Controller with a 'MapColumns' action along with a corresponding ViewModel and View. I'm using the defaultModelBinder to bind a number of drop down lists to a Dictionary in the ViewModel. The view model also contains an IList field for both source and destination columns which are used to render the view. My question is what to do when validation fails on the Post call to the MapColumns action? Currently the MapColumns view is returned with the ViewModel resulting from the default binding. This contains the Dictionary values but not the two lists used to render the page. What is the best way to re-provide these to the view? I can set them explicitly after failed validation, but if obtaining these values (via GetSourceColumns() and GetDestinationColumns() in the example) carries any overhead this doesn't seem ideal. What I am looking for is a way to retain these lists when they are not bound to the model from the view. Here is some code to illustrate: public class TestViewModel { public Dictionary<string, string> ColumnMappings { get; set; } public List<string> SourceColumns; public List<string> DestinationColumns; } public class TestController : Controller { [AcceptVerbs(HttpVerbs.Get)] public ActionResult MapColumns() { var model = new TestViewModel; model.SourceColumns = GetSourceColumns(); model.DestinationColumns = GetDestinationColumns(); return View(model); } [AcceptVerbs(HttpVerbs.Post)] public ActionResult MapColumns(TestViewModel model) { if( Validate(model) ) { // Do something with model.ColumnMappings RedirectToAction("Index"); } else { // Here model.SourceColumns and model.DestinationColumns are empty return View(model); } } } The relevant section of MapColumns.aspx: <% int columnCount = 0; foreach(string column in Model.targetColumns) {%> <tr> <td> <input type="hidden" name="ColumnMappings[<%= columnCount %>].Value" value="<%=column %>" /> <%= Html.DropDownList("ColumnMappings[" + columnCount + "].Key", Model.DestinationColumns.AsSelectItemList())%> </td> </tr> <% columnCount++; }%>

  Read the article

• Zend Framework - Ruby on Rails has a screencast showing how to code a blog in 15 minutes. Does ZF ha

  - by Sootah

  Ruby on Rails has a screencast presentation they use to promote their framework that shows how to code a basic weblog system in 15 minutes with RoR. Does the Zend PHP Framework have a similar screencast/presentation/whatever demonstrating something similar? It doesn't have to be a blog specifically, but I would definitely like to find a presentation that shows some rapid application development using ZF. Where I'm coming from: I have been programming on and off for years now. I started out with QBASIC waaaaay back in the day making little programs (text adventure games, screensavers, simple little things). I then moved to C++ but never really did anything too impressive with it. Since then (probably 5 years or so now) I have started to use C# for my desktop development and PHP for my web development. I've made some pretty cool tools here and there, but am certainly not a professional programmer by any stretch of the term as it has always simply been a hobby of mine. Right now I have two major web applications that I will start work on shortly. (Like tomorrow, or later tonight ideally.. :) ) Both will be database-driven apps that will require user registration, the ability to manipulate data that is specific to their account (their posts, listings, user account details, etc), amongst other things. Currently I am evaluating different frameworks to help me develop these web apps more quickly. I've been looking at, and have heard good things about Ruby on Rails. Hulu and YellowPages.com using it is an obvious endorsement - Of course, I have heard about the scalability issues that it potentially has; but that shouldn't be an issue with what I am working on. I don't expect millions of users per day for either project. I am also seriously looking at the Zend Framework for my needs because I already have some experience with PHP. Ideally I would like to find a ZF screencast that shows an app being written quickly so that I have a roughly equal comparison between the two options I am exploring and can see first-hand how things get done in both. That said - I am not opposed to considering frameworks other than RoR or ZF. The only research I've done on the subject has been over the past couple of days so I am quite certain that there are other excellent options out there that I've not even looked at - or heard of. Of course, it'd be awesome if there is a rapid app dev presentation that I can watch for whatever else is suggested. So - Suggestions? Links to good screencasts that show rapid application development in other frameworks? Are there other PHP frameworks that I should be considering? (Ones that are easy to deploy would be ideal, so I don't have to purchase a dedicated server that I have full control over. I'd like to keep my hosting costs down assuming that it's reasonable) Thanks in advance! -Sootah

  Read the article

• Where to put a glossary of important terms and patterns in documentation?

  - by Tetha

  Greetings. I want to document certain patterns in the code in order to build up a consistent terminology (in order to easen communication about the software). I am, however, unsure, where to define the terms given. In order to get on the same level, an example: I have a code generator. This code generator receives a certain InputStructure from the Parser (yes, the name InputStructure might be less than ideal). This InputStructure is then transformed into various subsequent datastructures (like an abstract description of the validation process). Each of these datastructures can be either transformed into another value of the same datastructure or it can be transformed into the next datastructure. This should sound like Pipes and Filters to some degree. Given this, I call an operation which takes a datastructures and constructs a value of the same datastructure a transformation, while I call an operation which takes a datastructure and produces a different follow-up datastructure a derivation. The final step of deriving a string containing code is called emitting. (So, overall, the codegenerator takes the input-structure and transforms, transforms, derives, transforms, derives and finally emits). I think emphasizing these terms will be benefitial in communications, because then it is easy to talk about things. If you hear "transformation", you know "Ok, I only need to think about these two datastructures", if you hear "emitting", you know "Ok, I only need to know this datastructure and the target language.". However, where do I document these patterns? The current code base uses visitors and offers classes called like ValidatorTransformationBase<ResultType> (or InputStructureTransformationBase<ResultType>, and so one and so on). I do not really want to add the definition of such terms to the interfaces, because in that case, I'd have to repeat myself on each and every interface, which clearly violates DRY. I am considering to emphasize the distinction between Transformations and Derivations by adding further interfaces (I would have to think about a better name for the TransformationBase-classes, but then I could do thinks like ValidatorTransformation extends ValidatorTransformationBase<Validator>, or ValidatorDerivationFromInputStructure extends InputStructureTransformation<Validator>). I also think I should add a custom page to the doxygen documentation already existing, as in "Glossary" or "Architecture Principles", which contains such principles. The only disadvantage of this would be that a contributor will need to find this page in order to actually learn about this. Am I missing possibilities or am I judging something wrong here in your opinion? -- Regards, Tetha

  Read the article

• MySQL table organization and optimization (Rails)

  - by aguynamedloren

  I've been learning Ruby on Rails over the past few months with no prior programming experience. Lately, I've been thinking about database optimization and table organization. I know there are great books on the subject, but I typically learn by example / as I go. Here's a hypothetical situation: Let's say I am building a social network for a niche community with 250,000 members (users). The users have the ability to attend events. Let's say there are 50,000 past/present/future events. Much like Facebook events, a user can attend any number of events and an event can have any number of attendees. In the database, there would be a table for users and a table for events. Somehow I would have to create an association between the users and events. I could create an "events" column in the users table such that each user row would contain a hash of event IDs, or I could create an "attendees" column in the events table such that each event row would contain a hash of user IDs. Neither of these solutions seem ideal, however. On a users profile page, I want to display the list of events they are associated with, which would require scanning the 50,000 event rows for the user ID of said user if I include an "attendees" column in the events table. Likewise, on an event page, I want to display a list of attendees for the event, which would require scanning the 250,000 user rows for the event ID of said event if I include an "events" column in the users table. Option 3 would be to create a third table that contains the attendee information for each and every event - but I don't see how this would solve any problems. Are these non-issues? Rails makes accessing all of this information easy, but I guess I'm worried about scale. It is entirely possible that I am under-estimating the speed and processing power of modern databases / servers / etc. How long would it take to scan 250,000 user rows for specific event IDs - 10ms? 100ms? 1,000ms? I guess that's not that bad. Am I just over-thinking this?

  Read the article

• Help choosing authentication method

  - by Dima

  I need to choose an authentication method for an application installed and integrated in customers environment. There are two types of environments - windows and linux/unix. Application is user based, no web stuff, pure Java. The requirement is to authenticate users which will use my application against customer provided user base. Meaning, customer installs my app, but uses his own users to grant or deny access to my app. Typical, right? I have three options to consider and I need to pick up the one which would be a) the most flexible to cover most common modern environments and b) would take least effort while stay robust and standard. Option (1) - Authenticate locally managing user credentials in some local storage, e.g. file. Customer would then add his users to my application and it will then check the passwords. Simple, clumsy but would work. Customers would have to punch every user they want to grant access to my app using some UI we will have to provide. Lots of work for me, headache to the customer. Option (2) - Use LDAP authentication. Customers would tell my app where to look for users and I will walk their directory resolving names into user names and trying to bind with found password. This is better approach IMO, but more fragile because I will have to walk an unknown directory structure and who knows if this will be permitted everywhere. Would be harder to test since there are many LDAP implementation out there, last thing I want is drowning in this voodoo. Option(3) - Use plain Kerberos authentication. Customers would tell my app what realm (domain) and which KDC (key distribution center) to use. In ideal world these two parameters would be all I need to set while customers could use their own administration tools to configure domain and kdc. My application would simply delegate user credentials to this third party (using JAAS or Spring security) and consider success when third party is happy with them. I personally prefer #3, but not sure what surprises I might face. Would this cover windows and *nix systems entirely? Is there another option to consider?

  Read the article

• Method interception in PHP 5.*

  - by Rolf

  Hi everybody, I'm implementing a Log system for PHP, and I'm a bit stuck. All the configuration is defined in an XML file, that declares every method to be logged. XML is well parsed and converted into a multidimensionnal array (classname = array of methods). So far, so good. Let's take a simple example: #A.php class A { public function foo($bar) { echo ' // Hello there !'; } public function bar($foo) { echo " $ù$ùmezf$z !"; } } #B.php class B { public function far($boo) { echo $boo; } } Now, let's say I've this configuration file: <interceptor> <methods class="__CLASS_DIR__A.php"> <method name="foo"> <log-level>INFO</log-level> <log-message>Transaction init</log-message> </method> </methods> <methods class="__CLASS_DIR__B.php"> <method name="far"> <log-level>DEBUG</log-level> <log-message>Useless</log-message> </method> </methods> </interceptor> The thing I'd like AT RUNTIME ONLY (once the XML parser has done his job) is: #Logger.php (its definitely NOT a final version) -- generated by the XML parser class Logger { public function __call($name,$args) { $log_level = args[0]; $args = array_slice($args,1); switch($method_name) { case 'foo': case 'far': //case ..... //write in log files break; } //THEN, RELAY THE CALL TO THE INITIAL METHOD } } #"dynamic" A.php class A extends Logger { public function foo($log_level, $bar) { echo ' // Hello there !'; } public function bar($foo) { echo " $ù$ùmezf$z !"; } } #"dynamic" B.php class B extends Logger { public function far($log_level, $boo) { echo $boo; } } The big challenge here is to transform A and B into their "dynamic" versions, once the XML parser has completed its job. The ideal would be to achieve that without modifying the code of A and B at all (I mean, in the files) - or at least find a way to come back to their original versions once the program is finished. To be clear, I wanna find the most proper way to intercept method calls in PHP. What are your ideas about it ??? Thanks in advance, Rolf

  Read the article

• How to show percentage of 'memory used' in a win32 process?

  - by pj4533

  I know that memory usage is a very complex issue on Windows. I am trying to write a UI control for a large application that shows a 'percentage of memory used' number, in order to give the user an indication that it may be time to clear up some memory, or more likely restart the application. One implementation used ullAvailVirtual from MEMORYSTATUSEX as a base, then used HeapWalk() to walk the process heap looking for additional free memory. The HeapWalk() step was needed because we noticed that after a while of running the memory allocated and freed by the heap was never returned and reported by the ullAvailVirtual number. After hours of intensive working, the ullAvailVirtual number no longer would accurately report the amount of memory available. However, this method proved not ideal, due to occasional odd errors that HeapWalk() would return, even when the process heap was not corrupted. Further, since this is a UI control, the heap walking code was executing every 5-10 seconds. I tried contacting Microsoft about why HeapWalk() was failing, escalated a case via MSDN, but never got an answer other than "you probably shouldn't do that". So, as a second implementation, I used PagefileUsage from PROCESS_MEMORY_COUNTERS as a base. Then I used VirtualQueryEx to walk the virtual address space adding up all regions that weren't MEM_FREE and returned a value for GetMappedFileNameA(). My thinking was that the PageFileUsage was essentially 'private bytes' so if I added to that value the total size of the DLLs my process was using, it would be a good approximation of the amount of memory my process was using. This second method seems to (sorta) work, at least it doesn't cause crashes like the heap walker method. However, when both methods are enabled, the values are not the same. So one of the methods is wrong. So, StackOverflow world...how would you implement this? which method is more promising, or do you have a third, better method? should I go back to the original method, and further debug the odd errors? should I stay away from walking the heap every 5-10 seconds? Keep in mind the whole point is to indicate to the user that it is getting 'dangerous', and they should either free up memory or restart the application. Perhaps a 'percentage used' isn't the best solution to this problem? What is? Another idea I had was a color based system (red, yellow, green, which I could base on more factors than just a single number)

  Read the article

• Share a "deep link" from a Windows 8/WinRT application

  - by Dave Parker

  I have searched using many different terms and phrases, and waded through many pages of results, but I have (remarkably) not seen anyone else addressing, even asking, about, this issue. So here goes... Ultimate Goal: Allow a user viewing a content-based page (may contain both text and images) within a Windows Store app to share that content with someone else. Description I am working on taking a fair amount of content and making it available for browsing/navigating as a Windows 8/WinRT/Windows Store (we need a consistent name here) application. One of the desired features is to take advantage of the Share Charm, such that someone viewing a page could share that page with someone else. The ideal behavior is for the application to implement the Share Source contract which would share an email message that contained some explanatory text, a link to get the app from the Windows Store, and a "deep link" into the shared page in the application. Solutions Considered We had originally looked at just generating a PDF representation of the page, but there are very few external libraries that would work under WinRT, and having to include externally licensed code would be problematic as well. Writing our own PDF generation code would out of scope. We have also considered generating a Word document or PowerPoint slide using OpenXML, but again, we run up against the limitaions of WinRT. In this case, it is highly unlikely the OpenXML SDK is useable in a WinRT application. Another thought was to pre-generate all of the pages as .pdf files, store them as resources, and when the Share Charm is invoked, share the .pdf file associated with the current page. The problem here is the application will have at least 150 content pages, and depending on how we break the content down, up to over 600. This would likely cause serious bloat. Where We Are At Thus we have come to sharing URIs. From what I can tell, though, the "deep linking" feature is only intended for use on Secondary Tiles tied to your application. Another avenue I considered was registering a protocol like, "my-special-app:" with the OS and having it fire up the application but that would require HKCR registry access, which is outside the WinRT sandbox. If it matters, we are leaning towards an HTML/JS application, rather than XAML/C#, because the converted content will all be in HTML and the WebView control in WinRT is fairly limited. This decision is not yet final, though. Conclusion So, is this possible, and if so, how would it be done or where can I find documentation on it? Thanks, Dave Parker

  Read the article

• How can I load a file into a DataBag from within a Yahoo PigLatin UDF?

  - by Cervo

  I have a Pig program where I am trying to compute the minimum center between two bags. In order for it to work, I found I need to COGROUP the bags into a single dataset. The entire operation takes a long time. I want to either open one of the bags from disk within the UDF, or to be able to pass another relation into the UDF without needing to COGROUP...... Code: # **** Load files for iteration **** register myudfs.jar; wordcounts = LOAD 'input/wordcounts.txt' USING PigStorage('\t') AS (PatentNumber:chararray, word:chararray, frequency:double); centerassignments = load 'input/centerassignments/part-*' USING PigStorage('\t') AS (PatentNumber: chararray, oldCenter: chararray, newCenter: chararray); kcenters = LOAD 'input/kcenters/part-*' USING PigStorage('\t') AS (CenterID:chararray, word:chararray, frequency:double); kcentersa1 = CROSS centerassignments, kcenters; kcentersa = FOREACH kcentersa1 GENERATE centerassignments::PatentNumber as PatentNumber, kcenters::CenterID as CenterID, kcenters::word as word, kcenters::frequency as frequency; #***** Assign to nearest k-mean ******* assignpre1 = COGROUP wordcounts by PatentNumber, kcentersa by PatentNumber; assignwork2 = FOREACH assignpre1 GENERATE group as PatentNumber, myudfs.kmeans(wordcounts, kcentersa) as CenterID; basically my issue is that for each patent I need to pass the sub relations (wordcounts, kcenters). In order to do this, I do a cross and then a COGROUP by PatentNumber in order to get the set PatentNumber, {wordcounts}, {kcenters}. If I could figure a way to pass a relation or open up the centers from within the UDF, then I could just GROUP wordcounts by PatentNumber and run myudfs.kmeans(wordcount) which is hopefully much faster without the CROSS/COGROUP. This is an expensive operation. Currently this takes about 20 minutes and appears to tack the CPU/RAM. I was thinking it might be more efficient without the CROSS. I'm not sure it will be faster, so I'd like to experiment. Anyway it looks like calling the Loading functions from within Pig needs a PigContext object which I don't get from an evalfunc. And to use the hadoop file system, I need some initial objects as well, which I don't see how to get. So my question is how can I open a file from the hadoop file system from within a PIG UDF? I also run the UDF via main for debugging. So I need to load from the normal filesystem when in debug mode. Another better idea would be if there was a way to pass a relation into a UDF without needing to CROSS/COGROUP. This would be ideal, particularly if the relation resides in memory.. ie being able to do myudfs.kmeans(wordcounts, kcenters) without needing the CROSS/COGROUP with kcenters... But the basic idea is to trade IO for RAM/CPU cycles. Anyway any help will be much appreciated, the PIG UDFs aren't super well documented beyond the most simple ones, even in the UDF manual.

  Read the article

• QValidator for hex input

  - by Evan Teran

  I have a Qt widget which should only accept a hex string as input. It is very simple to restrict the input characters to [0-9A-Fa-f], but I would like to have it display with a delimiter between "bytes" so for example if the delimiter is a space, and the user types 0011223344 I would like the line edit to display 00 11 22 33 44 Now if the user presses the backspace key 3 times, then I want it to display 00 11 22 3. I almost have what i want, so far there is only one subtle bug involving using the delete key to remove a delimiter. Does anyone have a better way to implement this validator? Here's my code so far: class HexStringValidator : public QValidator { public: HexStringValidator(QObject * parent) : QValidator(parent) {} public: virtual void fixup(QString &input) const { QString temp; int index = 0; // every 2 digits insert a space if they didn't explicitly type one Q_FOREACH(QChar ch, input) { if(std::isxdigit(ch.toAscii())) { if(index != 0 && (index & 1) == 0) { temp += ' '; } temp += ch.toUpper(); ++index; } } input = temp; } virtual State validate(QString &input, int &pos) const { if(!input.isEmpty()) { // TODO: can we detect if the char which was JUST deleted // (if any was deleted) was a space? and special case this? // as to not have the bug in this case? const int char_pos = pos - input.left(pos).count(' '); int chars = 0; fixup(input); pos = 0; while(chars != char_pos) { if(input[pos] != ' ') { ++chars; } ++pos; } // favor the right side of a space if(input[pos] == ' ') { ++pos; } } return QValidator::Acceptable; } }; For now this code is functional enough, but I'd love to have it work 100% as expected. Obviously the ideal would be the just separate the display of the hex string from the actual characters stored in the QLineEdit's internal buffer but I have no idea where to start with that and I imagine is a non-trivial undertaking. In essence, I would like to have a Validator which conforms to this regex: "[0-9A-Fa-f]( [0-9A-Fa-f])*" but I don't want the user to ever have to type a space as delimiter. Likewise, when editing what they types, the spaces should be managed implicitly.

  Read the article

• generated service mock: everything but RhinoMocks fails?

  - by hko

  I have the "quest" to search for the next Mocking Framework for my company, and basically it's down to NSubstitute (simplest syntax, but no strict mocks), FakeItEasy(best reviews, Roy Osherove bonus, and slightly better lib support than NSubstitute), Moq (best "other libs support", biggest featureset, downside: mock.Object). We definitely want to move on from RhinoMocks, e.g. because of the unusefull interactiontest error messages (it should tell me what the parameter was instead, when a verification fails). So I was pretty surprised the other day (that was yesterday) when I found out RhinoMocks could do a thing where every other mock framework fails at: Mocking an autogenerated SomethingService (a typical VS autogenerated service with a default construtor in a partial class). Please don't argue about the design.. I intend to write lightweight integration tests (and some unit tests), and I can't mess around with the service, the product is installed on too many customers system. See this code: // here the NSubstitute and FakeItEasy equivalents throw an exception.. see below TicketStoreService fakeTicketStoreService = MockRepository.GenerateMock<TicketStoreService>(); fakeTicketStoreService.Expect(service => service.DoSomething(Arg.Is(new Guid())).Return(new Guid()); fakeTicketStoreService.DoSomething(Arg.Is(new Guid())); fakeTicketStoreService.VerifyAllExpectations(); Note that DoSomething is a non-virtual methodcall in an autogenerated class. So it shouldn't work, according to common knowledge. But it does. Problem is that it's the only (non commercial) framework that can do this: Rhino.Mocks works, and verification works too FakeItEasy says it doesn't find a default constructor (probably just wrong exception message): No default constructor was found on the type SomeNamespace.TicketStoreService Moq gives something sane and understandable: Invalid setup on a non-virtual (overridable in VB) member: service=> service.DoSomething Nsubstitute gives a message System.NotSupportedException: Cannot serialize member System.ComponentModel.Component.Site of type System.ComponentModel.ISite because it is an interface. I'm really wondering what's going on here with the frameworks, except Moq. The "fancy new" frameworks seem to have an initial perf hit too, probably preparing some Type cache and serializing stuff, whilst RhinoMocks somehow manages to create a very "slim" mock without recursion. I have to admit I didn't like RhinoMocks very well, but here it shines.. unfortunately. So, is there a way to get that to work with newer (non-commercial!) mocking frameworks, or somehow get a sane error message out of Rhino.Mocks? And why can Rhino.Mocks achieve this, when clearly every Mocking framework states it can only work with virtual methods when given a concrete class? Let's not derail the discussion by talking about alternative approaches like Extract&Override or runtime-proxy Mocking frameworks like JustMock/TypeMock/Moles or the new Fakes framework, I know these, but that would be less ideal solutions, for reasons beyond this topic. Any help appreciated..

  Read the article

• Recommendations for a C++ polymorphic, seekable, binary I/O interface

  - by Trevor Robinson

  I've been using std::istream and ostream as a polymorphic interface for random-access binary I/O in C++, but it seems suboptimal in numerous ways: 64-bit seeks are non-portable and error-prone due to streampos/streamoff limitations; currently using boost/iostreams/positioning.hpp as a workaround, but it requires vigilance Missing operations such as truncating or extending a file (ala POSIX ftruncate) Inconsistency between concrete implementations; e.g. stringstream has independent get/put positions whereas filestream does not Inconsistency between platform implementations; e.g. behavior of seeking pass the end of a file or usage of failbit/badbit on errors Don't need all the formatting facilities of stream or possibly even the buffering of streambuf streambuf error reporting (i.e. exceptions vs. returning an error indicator) is supposedly implementation-dependent in practice I like the simplified interface provided by the Boost.Iostreams Device concept, but it's provided as function templates rather than a polymorphic class. (There is a device class, but it's not polymorphic and is just an implementation helper class not necessarily used by the supplied device implementations.) I'm primarily using large disk files, but I really want polymorphism so I can easily substitute alternate implementations (e.g. use stringstream instead of fstream for unit tests) without all the complexity and compile-time coupling of deep template instantiation. Does anyone have any recommendations of a standard approach to this? It seems like a common situation, so I don't want to invent my own interfaces unnecessarily. As an example, something like java.nio.FileChannel seems ideal. My best solution so far is to put a thin polymorphic layer on top of Boost.Iostreams devices. For example: class my_istream { public: virtual std::streampos seek(stream_offset off, std::ios_base::seekdir way) = 0; virtual std::streamsize read(char* s, std::streamsize n) = 0; virtual void close() = 0; }; template <class T> class boost_istream : public my_istream { public: boost_istream(const T& device) : m_device(device) { } virtual std::streampos seek(stream_offset off, std::ios_base::seekdir way) { return boost::iostreams::seek(m_device, off, way); } virtual std::streamsize read(char* s, std::streamsize n) { return boost::iostreams::read(m_device, s, n); } virtual void close() { boost::iostreams::close(m_device); } private: T m_device; };

  Read the article

• Selecting the contents of an ASP.NET TextBox in an UpdatePanel after a partial page postback

  - by Scott Mitchell

  I am having problems selecting the text within a TextBox in an UpdatePanel. Consider a very simple page that contains a single UpdatePanel. Within that UpdatePanel there are two Web controls: A DropDownList with three statically-defined list items, whose AutoPostBack property is set to True, and A TextBox Web control The DropDownList has a server-side event handler for its SelectedIndexChanged event, and in that event handler there's two lines of code: TextBox1.Text = "Whatever"; ScriptManager.RegisterStartupScript(this, this.GetType(), "Select-" + TextBox1.ClientID, string.Format("document.getElementById('{0}').select();", TextBox1.ClientID), true); The idea is that whenever a user chooses and item from the DropDownList there is a partial page postback, at which point the TextBox's Text property is set and selected (via the injected JavaScript). Unfortunately, this doesn't work as-is. (I have also tried putting the script in the pageLoad function with no luck, as in: ScriptManager.RegisterStartupScript(..., "function pageLoad() { ... my script ... }");) What happens is the code runs, but something else on the page receives focus at the conclusion of the partial page postback, causing the TextBox's text to be unselected. I can "fix" this by using JavaScript's setTimeout to delay the execution of my JavaScript code. For instance, if I update the emitted JavaScript to the following: setTimeout("document.getElementById('{0}').select();", 111); It "works." I put works in quotes because it works for this simple page on my computer. In a more complex page on a slower computer with more markup getting passed between the client and server on the partial page postback, I have to up the timeout to over a second to get it to work. I would hope that there is a more foolproof way to achieve this. Rather than saying, "Delay for X milliseconds," it would be ideal to say, "Run this when you're not going to steal the focus." What's perplexing is that the .Focus() method works beautifully. That is, if I scrap my JavaScript and replace it with a call to TextBox1.Focus(); then the TextBox receives focus (although the text is not selected). I've examined the contents of MicrosoftAjaxWebForms.js and see that the focus is set after the registered scripts run, but I'm my JavaScript skills are not strong enough to decode what all is happening here and why the selected text is unselected between the time it is selected and the end of the partial page postback. I've also tried using Firebug's JavaScript debugger and see that when my script runs the TextBox's text is selected. As I continue to step through it the text remains selected, but then after stepping off the last line of script (apparently) it all of the sudden gets unselected. Any ideas? I am pulling my hair out. Thanks in advance...

  Read the article

• Modular GWT design concerns

  - by GlGuru

  Hi, I have a couple of questions regarding a modular GWT based application framework. I have some ideas about them but being new to the field of web development I feel they are far from ideal. I'd appreciate a few comments and suggestions in this regard. Here are my questions: I am developing a framework which will allow third parties to embed GWT applications into our website and do some communication with them using simple iFrame postMessage. All these third party modules are going to use our SDK which is also GWT based. The problem arises that even though all the modules will be using the same codebase there is going to be a massive overheard in the amount of duplicate Javascript code (i.e. our common SDK code base which is quite large) being downloaded on the client's machine. This is highly redundant and problematic, not only due to the sheer size of duplicate code but, also due to the fact that subsequent updates of the SDK would require the modules to be recompiled which is going to create a DLL hell kind of scenario in the long run. What is the best way of doing this kind of thing? Is there a way where I can have some static GWT code (i.e. the SDK) and the dynamic GWT module refers to it (even if lies on a different domain) and it all work happily? The other part of the problem lies in providing robust scripting front end to the SDK. At first it appears to be trivial since Javascript itself is a scripting language. However, I do not know how to load and call a piece of pure Javascript code at runtime? I am willing to put restrictions on the target Javascript (i.e. having a function main and unique namespace or something). Furthermore the Javascript will come as a string from a database and not as a full URL. If its doable in Javascript how does one get this right in GWT i.e. forcing the compiler to emit a certain function in the generated Javascript? This I believe can be lesser of a problem by having a stub Javascript with all the right requirements which just loads up a GWT generated Javascript. Is any of this possible at all? I generally hate to be this verbose but I hope to find a quick solution to the problem as its holding up my progress. I'd highly appreciate any comments, suggestions and experiences.

  Read the article

• RAD Visual Web Application Creator/ Builder/ Designer for PHP

  - by inhoue

  Hi all, I want to see if any of you know a (free and open source will be ideal) tool/ app that can help build a php web application very quickly without investing too much time on writing codes, preferring drag and drop/ point and click work-flow designer for logic design (see Agile from Outsystems below). Plus, visual designer for the business logic is great since it can help a developer visualize the logic better. There are a lot of GUI builders, form builders out there, but I am looking for one app for the entire web application development process. My goal is to find an application that a team of developers can use together and use the build-in code of the app as much as possible. E.g. the app will provide a modular just for handle user login or a shopping cart; a developer just need to drag and drop the modular to the logic designer and the code will be generated. This way the functionality will be in a module and code will always be standard across developers. So if a new developer get on-board, he will just need to use the system and get up and running quickly. To explain this better: there is a lot php frameworks, e.g. cakephp, CodeIgniter, etc which I can use to help coding, but still I need to create (code) the GUI, writing quite a bit of codes. I am looking for a tool/ app that is a little more high level than those frameworks. Here is 2 examples apps I found during my google search which they have visual logic designer and gui builder in one single app. Also a single click deployment (but I need it to be php apps or at least I can deploy the (php) code to a LAMP/ WAMP server): Wavemaker: for JAVA Agile from Outsystems: for JAVA or .net (This one is really good, with work-flow drag and drop logic designer!) Talend: it is just an ETL tool, but the concept is what I want to bring up. Drag and drop, point and click logic design. Custom code can be added if it is needed, but the drag and drop process already finished the structure and most of the coding of the web app one needs to build. I want to list Adobe Flex, but it is more like a GUI designer + IDE, not exactly what I want to describe here. The drag and drop/ work-flow logic designer is a key for the app. I could go for the CMS route by learning how to extend them, but it is not that flexible for me and is a long learning curve. Anybody came across this type of app before? Or any idea of how can I find those apps? I googled them for long time, I don't see any of them for php and just few (just 2) for Java. Thanks in advance!

  Read the article

• Best way to run remote VBScript in ASP.net? WMI or PsExec?

  - by envinyater

  I am doing some research to find out the best and most efficient method for this. I will need to execute remote scripts on a number of Window Servers/Computers (while we are building them). I have a web application that is going to automate this task, I currently have my prototype working to use PsExec to execute remote scripts. This requires PsExec to be installed on the system. A colleague suggested I should use WMI for this. I did some research in WMI and I couldn't find what I'm looking for. I want to either upload the script to the server and execute it and read the results, or already have the script on the server and execute it and read the results. I would prefer the first option though! Which is more ideal, PsExec or WMI? For reference, this is my prototype PsExec code. This script is only executing a small script to get the Windows OS and Service Pack Info. Protected Sub windowsScript(ByVal COMPUTERNAME As String) ' Create an array to store VBScript results Dim winVariables(2) As String nameLabel.Text = Name.Text ' Use PsExec to execute remote scripts Dim Proc As New System.Diagnostics.Process ' Run PsExec locally Proc.StartInfo = New ProcessStartInfo("C:\Windows\psexec.exe") ' Pass in following arguments to PsExec Proc.StartInfo.Arguments = COMPUTERNAME & " -s cmd /C c:\systemInfo.vbs" Proc.StartInfo.RedirectStandardInput = True Proc.StartInfo.RedirectStandardOutput = True Proc.StartInfo.UseShellExecute = False Proc.Start() ' Pause for script to run System.Threading.Thread.Sleep(1500) Proc.Close() System.Threading.Thread.Sleep(2500) 'Allows the system a chance to finish with the process. Dim filePath As String = COMPUTERNAME & "\TTO\somefile.txt" 'Download file created by script on Remote system to local system My.Computer.Network.DownloadFile(filePath, "C:\somefile.txt") System.Threading.Thread.Sleep(1000) ' Pause so file gets downloaded ''Import data from text file into variables textRead("C:\somefile.txt", winVariables) WindowsOSLbl.Text = winVariables(0).ToString() SvcPckLbl.Text = winVariables(1).ToString() System.Threading.Thread.Sleep(1000) ' ''Delete the file on server - we don't need it anymore Dim Proc2 As New System.Diagnostics.Process Proc2.StartInfo = New ProcessStartInfo("C:\Windows\psexec.exe") Proc2.StartInfo.Arguments = COMPUTERNAME & " -s cmd /C del c:\somefile.txt" Proc2.StartInfo.RedirectStandardInput = True Proc2.StartInfo.RedirectStandardOutput = True Proc2.StartInfo.UseShellExecute = False Proc2.Start() System.Threading.Thread.Sleep(500) Proc2.Close() ' Delete file locally File.Delete("C:\somefile.txt") End Sub

  Read the article

• a script translatable to JavaScript with callback-hell automatic avoider :-)

  - by m1uan

  I looking for "translator" for JavaScript like already is CoffeScript, which will be work for example with forEach (inspired by Groovy) myArray.forEach() -> val, idx { // do something with value and idx } translate to JavaScript myArray.forEach(function(val, idx){ // do something with value and idx }); or something more usefull... function event(cb){ foo()-> err, data1; bar(data1)-> err, data2; cb(data2); } the method are encapsulated function event(cb){ foo(function(err,data1){ bar(data1, function(err, data2) { cb(data2); }); }); } I want ask if similar "compiler" to JavaScript like this even better already doesn't exists? What would be super cool... my code in nodejs looks mostly like this :-) function dealer(cb){ async.parallel([ function(pcb){ async.watterfall([function(wcb){ first(function(a){ wcb(a); }); }, function(a, wcb){ thirt(a, function(c){ wcb(c); }); fourth(a, function(d){ // dealing with “a” as well and nobody care my result }); }], function(err, array_with_ac){ pcb(array_with_ac); }); }, function(pcb){ second(function(b){ pcb(b);}); }], function(err, data){ cb(data[0][0]+data[1]+data[0][1]); // dealing with “a” “b” and “c” not with “d” }); } but, look how beautiful and readable the code could be: function dealer(cb){ first() -> a; second() -> b; third(a) -> c; // dealing with “a” fourth(a) -> d; // dealing with “a” as well and nobody care about my result cb(a+b+c); // dealing with “a” “b” and “c” not with “d” } yes this is ideal case when the translator auto-decide, method need to be run as parallel and method need be call after finish another method. I can imagine it's works Please, do you know about something similar? Thank you for any advice;-)

  Read the article

• Sqlite issues with HTC Desire HD

  - by Greg

  Recently I have been getting a lot of complaints about the HTC Desire series and it failing while invoking sql statements. I have received reports from users with log snapshots that contain the following. I/Database( 2348): sqlite returned: error code = 8, msg = statement aborts at 1: [pragma journal_mode = WAL;] E/Database( 2348): sqlite3_exec to set journal_mode of /data/data/my.app.package/files/localized_db_en_uk-1.sqlite to WAL failed followed by my app basically burning in flames because the call to open the database results in a serious runtime error that manifests itself as the cursor being left open. There shouldn't be a cursor at this point as we are trying to open it. This only occurs with the HTC Desire HD and Z. My code basically does the following (changed a little to isolate the problem area). SQLiteDatabase db; String dbName; public SQLiteDatabase loadDb(Context context) throws IOException{ //Close any old db handle if (db != null && db.isOpen()) { db.close(); } // The name of the database to use from the bundled assets. String dbAsset = "/asset_dir/"+dbName+".sqlite"; InputStream myInput = context.getAssets().open(dbAsset, Context.MODE_PRIVATE); // Create a file in the app's file directory since sqlite requires a path // Not ideal but we will copy the file out of our bundled assets and open it // it in another location. FileOutputStream myOutput = context.openFileOutput(dbName, Context.MODE_PRIVATE); byte[] buffer = new byte[1024]; int length; while ((length = myInput.read(buffer)) > 0) { myOutput.write(buffer, 0, length); } // Close the streams myOutput.flush(); // Guarantee Write! myOutput.getFD().sync(); myOutput.close(); myInput.close(); // Not grab the newly written file File fileObj = context.getFileStreamPath(dbName); // and open the database return db = SQLiteDatabase.openDatabase(fileObj.getAbsolutePath(), null, SQLiteDatabase.OPEN_READONLY | SQLiteDatabase.NO_LOCALIZED_COLLATORS); } Sadly this phone is only available in the UK and I don't have one in my inventory. I am only getting reports of this type from the HTC Desire series. I don't know what changed as this code has been working without any problem. Is there something I am missing?

  Read the article

• Java Best Practice for type resolution at runtime.

  - by Brian

  I'm trying to define a class (or set of classes which implement the same interface) that will behave as a loosely typed object (like JavaScript). They can hold any sort of data and operations on them depend on the underlying type. I have it working in three different ways but none seem ideal. These test versions only allow strings and integers and the only operation is add. Adding integers results in the sum of the integer values, adding strings concatenates the strings and adding an integer to a string converts the integer to a string and concatenates it with the string. The final version will have more types (Doubles, Arrays, JavaScript-like objects where new properties can be added dynamically) and more operations. Way 1: public interface DynObject1 { @Override public String toString(); public DynObject1 add(DynObject1 d); public DynObject1 addTo(DynInteger1 d); public DynObject1 addTo(DynString1 d); } public class DynInteger1 implements DynObject1 { private int value; public DynInteger1(int v) { value = v; } @Override public String toString() { return Integer.toString(value); } public DynObject1 add(DynObject1 d) { return d.addTo(this); } public DynObject1 addTo(DynInteger1 d) { return new DynInteger1(d.value + value); } public DynObject1 addTo(DynString1 d) { return new DynString1(d.toString()+Integer.toString(value)); } } ...and similar for DynString1 Way 2: public interface DynObject2 { @Override public String toString(); public DynObject2 add(DynObject2 d); } public class DynInteger2 implements DynObject2 { private int value; public DynInteger2(int v) { value = v; } @Override public String toString() { return Integer.toString(value); } public DynObject2 add(DynObject2 d) { Class c = d.getClass(); if(c==DynInteger2.class) { return new DynInteger2(value + ((DynInteger2)d).value); } else { return new DynString2(toString() + d.toString()); } } } ...and similar for DynString2 Way 3: public class DynObject3 { private enum ObjectType { Integer, String }; Object value; ObjectType type; public DynObject3(Integer v) { value = v; type = ObjectType.Integer; } public DynObject3(String v) { value = v; type = ObjectType.String; } @Override public String toString() { return value.toString(); } public DynObject3 add(DynObject3 d) { if(type==ObjectType.Integer && d.type==ObjectType.Integer) { return new DynObject3(Integer.valueOf(((Integer)value).intValue()+((Integer)value).intValue())); } else { return new DynObject3(value.toString()+d.value.toString()); } } } With the if-else logic I could use value.getClass()==Integer.class instead of storing the type but with more types I'd change this to use a switch statement and Java doesn't allow switch to use Classes. Anyway... My question is what is the best way to go about something thike this?

  Read the article

• Where are the function literals in c++?

  - by academicRobot

  First of all, maybe literals is not the right term for this concept, but its the closest I could think of (not literals in the sense of functions as first class citizens). The idea is that when you make a conventional function call, it compiles to something like this: callq <immediate address> But if you make a function call using a function pointer, it compiles to something like this: mov <memory location>,%rax callq *%rax Which is all well and good. However, what if I'm writing a template library that requires a callback of some sort with a specified argument list and the user of the library is expected to know what function they want to call at compile time? Then I would like to write my template to accept a function literal as a template parameter. So, similar to template <int int_literal> struct my_template {...};` I'd like to write template <func_literal_t func_literal> struct my_template {...}; and have calls to func_literal within my_template compile to callq <immediate address>. Is there a facility in C++ for this, or a work around to achieve the same effect? If not, why not (e.g. some cataclysmic side effects)? How about C++0x or another language? Solutions that are not portable are fine. Solutions that include the use of member function pointers would be ideal. I'm not particularly interested in being told "You are a <socially unacceptable term for a person of low IQ>, just use function pointers/functors." This is a curiosity based question, and it seems that it might be useful in some (albeit limited) applications. It seems like this should be possible since function names are just placeholders for a (relative) memory address, so why not allow more liberal use (e.g. aliasing) of this placeholder. p.s. I use function pointers and functions objects all the the time and they are great. But this post got me thinking about the don't pay for what you don't use principle in relation to function calls, and it seems like forcing the use of function pointers or similar facility when the function is known at compile time is a violation of this principle, though a small one.

  Read the article

• Unlimited SMS API/Gateway (Sending and Receiving)

  - by Naif

  I am creating a chat application which requires that users be able to send and receive sms messages through a web interface. It would be somewhat similar to the text messaging service available in yahoo mail or in aol instant messenger. The situation is this: Given the high quantity of messages that would be sent and received, paying on a per message basis is not economically feasible. How is it that sites such as yahoo, aim, and twitter can send and receive unlimited sms messages? Essentially, I am looking for a way to send and receive unlimited sms from my computer. Below is a list of some approaches I've come up with but have run into problems with as well. If just one of the approaches can be utilized effectively, then I am fine. As a note on the nature of my application: I will only be sending messages to users that explicitly sign up for the service and permit the receiving of messages. They can unsubscribe at any time. This is to prevent spam. I am aware of software such as Kannel which allows one to connect to a providers smsc gateway. However, this adds the risk of not being approved by the provider which would be unacceptable. Is there any way to significantly mitigate this risk? Utilizing a gateway provider eliminates this risk, but adds the issue of per message pricing. I am also aware of email to sms. However, I have done some testing with that and it appears that this method results in many messages being undelivered or delivered VERY late. If it weren't for that, this approach would have been ideal. Is there any way to negotiate with carriers to remove me from their filters (considering the nature of my service as stated before)? I could use a gsm modem, but even with an "unilimited" plan on a sim card, there are still limits (around 100,000 messages or so). Furthermore, from my understanding, gsm modems are capable of only sending out around a dozen messages per minute. I need to be able to send out as much as several hundred messages per second. During the first 2 months, around 10 messages per second would suffice. There are ways to send out ads with messages to cover the per message costs. However, this is a deal-breaker since it has a high chance of tarnishing the quality of service. Furthermore, I know it is possible to do it without such ads since yahoo, aim, and twitter do not send ads with their messages.

  Read the article

• What classes should I map against with NHibernate?

  - by apollodude217

  Currently, we use NHibernate to map business objects to database tables. Said business objects enforce business rules: The set accessors will throw an exception on the spot if the contract for that property is violated. Also, the properties enforce relationships with other objects (sometimes bidirectional!). Well, whenever NHibernate loads an object from the database (e.g. when ISession.Get(id) is called), the set accessors of the mapped properties are used to put the data into the object. What's good is that the middle tier of the application enforces business logic. What's bad is that the database does not. Sometimes crap finds its way into the database. If crap is loaded into the application, it bails (throws an exception). Sometimes it clearly should bail because it cannot do anything, but what if it can continue working? E.g., an admin tool that gathers real-time reports runs a high risk of failing unnecessarily instead of allowing an admin to even fix a (potential) problem. I don't have an example on me right now, but in some instances, letting NHibernate use the "front door" properties that also enforce relationships (especially bidi) leads to bugs. What are the best solutions? Currently, I will, on a per-property basis, create a "back door" just for NHibernate: public virtual int Blah {get {return _Blah;} set {/*enforces BR's*/}} protected virtual int _Blah {get {return blah;} set {blah = value;}} private int blah; I showed the above in C# 2 (no default properties) to demonstrate how this gets us basically 3 layers of, or views, to blah!!! While this certainly works, it does not seem ideal as it requires the BL to provide one (public) interface for the app-at-large, and another (protected) interface for the data access layer. There is an additional problem: To my knowledge, NHibernate does not give you a way to distinguish between the name of the property in the BL and the name of the property in the entity model (i.e. the name you use when you query, e.g. via HQL--whenever you give NHibernate the name (string) of a property). This becomes a problem when, at first, the BR's for some property Blah are no problem, so you refer to it in your O/R mapping... but then later, you have to add some BR's that do become a problem, so then you have to change your O/R mapping to use a new _Blah property, which breaks all existing queries using "Blah" (common problem with programming against strings). Has anyone solved these problems?!

  Read the article

• UCA + Natural Sorting

  - by Alix Axel

  I recently learnt that PHP already supports the Unicode Collation Algorithm via the intl extension: $array = array ( 'al', 'be', 'Alpha', 'Beta', 'Álpha', 'Àlpha', 'Älpha', '????', 'img10.png', 'img12.png', 'img1.png', 'img2.png', ); if (extension_loaded('intl') === true) { collator_asort(collator_create('root'), $array); } Array ( [0] => al [2] => Alpha [4] => Álpha [5] => Àlpha [6] => Älpha [1] => be [3] => Beta [11] => img1.png [9] => img10.png [8] => img12.png [10] => img2.png [7] => ???? ) As you can see this seems to work perfectly, even with mixed case strings! The only drawback I've encountered so far is that there is no support for natural sorting and I'm wondering what would be the best way to work around that, so that I can merge the best of the two worlds. I've tried to specify the Collator::SORT_NUMERIC sort flag but the result is way messier: collator_asort(collator_create('root'), $array, Collator::SORT_NUMERIC); Array ( [8] => img12.png [7] => ???? [9] => img10.png [10] => img2.png [11] => img1.png [6] => Älpha [5] => Àlpha [1] => be [2] => Alpha [3] => Beta [4] => Álpha [0] => al ) However, if I run the same test with only the img*.png values I get the ideal output: Array ( [3] => img1.png [2] => img2.png [1] => img10.png [0] => img12.png ) Can anyone think of a way to preserve the Unicode sorting while adding natural sorting capabilities?

  Read the article

• Stored procedure performance randomly plummets; trivial ALTER fixes it. Why?

  - by gWiz

  I have a couple of stored procedures on SQL Server 2005 that I've noticed will suddenly take a significantly long time to complete when invoked from my ASP.NET MVC app running in an IIS6 web farm of four servers. Normal, expected completion time is less than a second; unexpected anomalous completion time is 25-45 seconds. The problem doesn't seem to ever correct itself. However, if I ALTER the stored procedure (even if I don't change anything in the procedure, except to perhaps add a space to the script created by SSMS Modify command), the completion time reverts to expected completion time. IIS and SQL Server are running on separate boxes, both running Windows Server 2003 R2 Enterprise Edition. SQL Server is Standard Edition. All machines have dual Xeon E5450 3GHz CPUs and 4GB RAM. SQL Server is accessed using its TCP/IP protocol over gigabit ethernet (not sure what physical medium). The problem is present from all web servers in the web farm. When I invoke the procedure from a query window in SSMS on my development machine, the procedure completes in normal time. This is strange because I was under the impression that SSMS used the same SqlClient driver as in .NET. When I point my development instance of the web app to the production database, I again get the anomalous long completion time. If my SqlCommand Timeout is too short, I get System.Data.SqlClient.SqlException: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. Question: Why would performing ALTER on the stored procedure, without actually changing anything in it, restore the completion time to less than a second, as expected? Edit: To clarify, when the procedure is running slow for the app, it simultaneously runs fine in SSMS with the same parameters. The only difference I can discern is login credentials (next time I notice the behavior, I'll be checking from SSMS with the same creds). The ultimate goal is to get the procs to sustainably run with expected speed without requiring occasional intervention. Resolution: I wanted to to update this question in case others are experiencing this issue. Following the leads of the answers below, I was able to consistently reproduce this behavior. In order to test, I utilize sp_recompile and pass it one of the susceptible sprocs. I then initiate a website request from my browser that will invoke the sproc with atypical parameters. Lastly, I initiate a website request to a page that invokes the sproc with typical parameters, and observe that the request does not complete because of a SQL timeout on the sproc invocation. To resolve this on SQL Server 2005, I've added OPTIMIZE FOR hints to my SELECT. The sprocs that were vulnerable all have the "all-in-one" pattern described in this article. This pattern is certainly not ideal but was a necessary trade-off given the timeframe for the project.

  Read the article

< Previous Page | 67 68 69 70 71 72 73 74 75 76 77 78  | Next Page >