Search Results

Search found 2415 results on 97 pages for 'asus motherboard'.

Page 72/97 | < Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >

• My 386sx refuses to start in cold days

  - by Armadillo

  My old computer refuses to start in cold days. So, in really hot days (about 40ºC / 104ºF ) or even hotter, this PC usually starts, but in cold days, it wont. When the temperature is not in the "sweet-spot" the power light turns on for an half a second and then the computer turns off. But when it's really cold, not even the power light turns on, nor even a blink. Sometimes I use an Hair dryer, pointed directly to the PSU and that works great. 5 to 10 minutes is enough, depending on the ambient temperature. I think something is going wrong in my AT power supply. I can't replace this PSU for another because it has a non-standard size and connectors to power the motherboard. Does anybody have a clue about what it's failing in my PSU, so I can change that component (resistor, capacitor, ??, etc) and rock on with my 80386? Thanks

  Read the article

• How To Adjust Properly Brightness And Contrast On Monitor

  - by Johannes

  This days, it seems that I either go worse with my eyes or some settings with contrast and brightness have been changed. However, I have been searching now for some tutorial on how to adjust contrast and brightness, and I have found already some, on how to use Microsoft Win7 Calibrate Display Color program, but some people don't recommend it.. My monitor control menu shows settings (which are by default) that contrast is set to 80, contrast to 90 and sharpnes to 45, for which I belive are pretty dam high. I'm usually every day in front of my PC about 6-10h. The biggest problem is, when the night comes, and I have to read some word document, after a 10-15m of reading, eyes starts hurting. I'm using ASUS VW198 and Nvidia 9800 GT graphic card. So please suggest me, what should I decrease, contrast or brightness or both?

  Read the article

• How to tell if my sound card is listed in Device Manager?

  - by Bruhan

  The sound on my computer suddenly stopped working. When I check Sounds and Audio Devices in the Control Panel, I get "No Audio Device" with everything grayed out. When I check the Device Manager under "Sound, video and game controllers" I see the following list: Audio Codecs Legacy Audio Drivers Legacy Video Capture Devices Media Control Devices MPU-401 Compatible MIDI Device Standard Game Port Video Codecs None of these looks like my sound card. Of course, my sound "card" is not really a sound card, it's integrated with the nVidia-nForce motherboard. I'm running Windows XP. So is one of the above my sound device, or is the OS not detecting it? If the latter, how do I get it to detect it?

  Read the article

• How can I pin point a USB file transfer bottleneck in Unix?

  - by HankHendrix

  I'm experiencing very slow data transfer speeds over USB 2.0 on my nix box and was wondering how I can pin-point the cause of the problem. I've looked into iotop and top but the cpu and mem figures look normal (compared to guides I have checked). The box which is affected is Ubuntu 12.04 32bit Server running on an Asus EEE 701 2G model and I am transferring from the OS over USB 2.0 to an external HDD (which transfers at 30MB/s+ on Windows 7 on other machine). I get rsync write speeds of 1MB/s from OS to USB HDD which seems ridiculously slow. These speeds are consistent with other USB HDDs and sticks.

  Read the article

• Graphics drivers could not find compatible graphics hardware

  - by selak

  I have a desktop with Asus P5KPS/EPU motherboard and Nvidia GF 9600 GT Graphic Adapter. I just set up new windows 7. My problem is that I cannot find a good dirver for my Graphic Adapter. I've downloaded driver from Nvidia.com which say support my GF 9600 GT, but when I installed it, it said This graphics drivers could not find compatible graphics hardware. I go into safe mode, uninstall Standard Graphics Adapter that auto installed then install my Nvidia driver, still not work. Anyone can show me how to solve this problem?

  Read the article

• Can't unlock locked screen, in Ubuntu 12

  - by Camille Goudeseune

  After locking the screen (with a keystroke bound to xlock -nice 8 -mode blank), I can unlock the screen as expected, but only within a few minutes. After being locked overnight, when I hit a key (even Ctrl+Alt combos), the screen stays black with just a brief white flash across the middle of both monitors. The workaround is to ssh in from another host and restart X. Some months ago, this happened every few weeks. By now it happens almost every morning. How do I even start to diagnose this? What might I look for in log files? (The intermittency is particularly troubling.) Failing that, is there an alternative to xlock aka xlockmore? Hardware: 3-year-old HP minitower, GEForce 9800 GT, two Asus LCD monitors. Software: Ubuntu 12.04.2 LTS. Window manager awesome-wm. NVidia driver 304.88. XLock version xlockmore-5.31.

  Read the article

• Computer hangs on start-up, but re-start always works

  - by user10604

  I press the power switch; the fans start whirring; then precisely nothing happens. The monitor lights (I have two monitors) blink to indicate that they aren't receiving any signal - no BIOS splash screen, nothing. This scenario occurs about 80 percent of the time, the other 20 percent being normal starts. Noticing that the computer has not started properly, I press the power switch for four seconds to turn the computer off, and then I press it again to start the computer for the second time. It always starts normally the second time. Always. The power supply is a 750W from SilverStone. The motherboard is a Gigabyte P55A-UD3P. The video card is an Asus EN9800GT. There's 8 GB of RAM. I don't know what other information might be pertinent. Help!

  Read the article

• Dell eSATAp not working with some SATA disks

  - by pistache

  I have a Dell Inspiron XPS 15 (L502X) laptop, with an eSATAp port. I also have a Western Digital 1TB 3"5 SATA drive, that I'd like to use with the laptop. I bought a eSATAp <- SATA 22-pin cable (from Delock). When I use this cable my 3"5 HDD does NOT power up, no spin up. I thought that it's just this HDD taking too much power from the motherboard. However, I tested too with my 2"5 SATA HDD and it works successfully. Now the weird thing is that this 2"5 HDD takes 1.1A at 5V, and that the 3"5 HDD takes 0.7A at 5V. I don't understand why it can't work. Is there anything I could do for it to work ? What is really the problem ? Thanks for your help, Hugo

  Read the article

• Games + Closed Lid = Hibernation

  - by Isaac Rabinovitch

  I have an ASUS N53S that I mainly bought for its RAM capacity. (I run a lot of VMs.) But as a bonus, it came with a fancy ATI video card. So I decided to install GTA 4 and plug it into a big monitor and settle down for some casual mayhem. But after about 5 minutes, it goes into hibernation! What gives? Since I was using an external monitor and didn't need the keyboard (using an XBox controller) I closed the lid on the laptop. Gaming is compute-intensive, so my GPU and CPU were both working hard and generating heat. Closing the lid interfered with cooling. Since I have the laptop configured to hibernate when I press the power button, the heat-triggered shutdown caused hibernation.

  Read the article

• Is a "Soft Modem" (i.e. internal) really going to cause incompatibilities?

  - by Farseeker

  Thanks to the fact that our banking industry in Australia... outdated (which is the politest word I could think of when describing the banking industry)... to do a certain kind of transaction our bank requires us to use a dialup modem and send serial data to them. When reading through their documentation (last update: 1995), they state that any "Soft Modems" (by which I assume they mean internal modems, as they refer to a AMR socket on a motherboard, which I haven't seen in donkeys years) should not be used because of "possible incompatibilities" Seeing as buying an external, serial-port modem is actually quite expensive these days and I have a whole box of PCI modems taken out of a bunch of Dells I really don't want to have to buy an external modem. Additionally I think their documentation is simply outdated. Has anyone had experience with internal modems causing issues, where an external modem didn't?

  Read the article

• Workstation Build: Single 2.66ghz i-7 with overclock potential, OR Dual 5520 2.26ghz Xeons?

  - by jdc0589

  There are probably better places to ask this, but I am used to the excellent quality of responses on stack overflow. I am rebuilding my desktop in a few months. Aside from normal lightweight internet usage, I use it to run sqlServer, mySql, 1-2 Ubuntu VMs from time to time, lots of IDE's, and a media server for my PS3. The two possible setups cost the exact same amount (within $50) and would both have 12gb 1333mhz ddr3 ram and a 500gb RAID-0 array (250x2). Now, If I go with a single i-7 920 2.66ghz quadcore, I can easily overclock it to 3ghz, and would have cash leftover to get a 160gb ssd (either the ocz vertex or the 120gb intel) for the main OS/Program install drive. Else, I could get a dual lga1366 motherboard with two e5520 Xeon's (2.26ghz),just use the disks I already have. So, do I go for 8 physical/16 virtual cores at 2.26ghz (No overclocking on server boards) with normal disk I/O, or a 4 physical/8 virtual cores at 3.0ghz with really outstanding disk I/O?

  Read the article

• Can a processor upgrade cause BSOD?

  - by Daniel

  I Had the following hardware setup: Phenom II X4 945 Asus M4A97 4GB DDR2 OCZ Radeon HD5850 OCZ Agility 2 120 GB Windows 7 x64 Pro Fully updated (latest drivers and windows update patches) Then I bought an used Phenom II X6 1090T and installed it without formatting. Since that my computer started BSODing almost every time I'm playing any game and with different error messages, like: page fault in non-paged area bad pool header the video memory manager found a problem error in dxgmm1.sys(or something like that) And when it doesn't BSOD the game simply crashes. I have tried: Updating BIOS Reseting BIOS to defaults Reinstalling Video Drivers Installing the latest DirectX All that's left is to do a full format and I don't want to do that since it's going to be a lot of work to fine tune windows to my preferences again. So is my "new" processor defective or do I really need to format the computer? Update: I use a (properly installed) custom cooler from Coolermaster and both the BIOS and the Open Hardware Monitor(Application) attest the CPU is not overheating, so I guess the CPU its defective and since I bought it from a guy over the Internet I'm probably screwed

  Read the article

• Why does Resource Monitor in windows 7 show half my memory as "Hardware Reserved"?

  - by Brandon

  Does anyone know why in Windows 7 Resource Monitor shows that I have 8 GB of RAM installed on my computer, but I only have 3.2 GB available as 4.8 GB are in "Hardware Reserve". I researched this issue and tried going into msconfig and making sure that in the boot options the number of processors and max memory options were turned off. I also opened the computer up and reseated each of the memory sticks while clearing out any dust that was in there. Some info on the system I am using: OS: Windows 7 Enterprise 64-bit Edition CPU: AMD Phenom X4 9750 Memory: 4 X 2GB DDR2 memory Motherboard: MS-7548 (Aspen) Any help would be much appreciated.

  Read the article

• DH61AG's mythical 2 pin 19v power socket and is too low of votage bad?

  - by Nick Orton

  I have an intel dh61ag motherboard. It has an external 19v power adapter. It also has a 1x2 pin 19VDC internal power connector. Now I cannot find a psu or adapter or anything that will plug into this. In an intel forum, one person said that he plugged half of a 2x2 psu connector in and it worked. Since this would deliver 12v into a socket that asks for 19v, I suspect that this is a bad idea. I don't know much about hardware. Can anyone explain to me why this would be a bad idea?

  Read the article

• pc dont work at full speed

  - by kubilas

  motherboard gigabyte GA-8I915PL-G, pentium 4 630 3,0 ghz dont run at default speed ; fsb 800, cpu host 200, cpu 3000 mhz but run some time at fsb 533 cpu host 133 cpu 2025 mhz some time at fsb 75 and cpu 1128 mhz only. when i set in easy tune default parametrs pc dont work. some time i clear cmos and i can set in bios default parametrs, some time clearing cmos dont help, bios i update. how i can fix this problem? sorry about my bad english.

  Read the article

• Making an SSD drive the primary boot/system drive

  - by David Ebbo

  [Not much of a hardware guy, so please excuse my ignorance :)] I just ordered an HP Pavilion Elite HPE-450t (desktop), which came with Win7 installed on the hard drive, using two partitions (C: and D:). Separately, I bought a 128GB SSD that I intend to use as my system drive. I got it in there and connected it, and right now, it's the J: drive (which was the first letter available in disk manager). My goal is for the SSD to get a clean OS install be the C: drive, and to clean out the other hard drive and make it D: (for misc data storage) Question #1: the motherboard has two SATA plugs. Does it matter which one I use for which drive? Question #2: what's the right way to install Win7 on the SSD in a way that it ends up being the C: drive? Do I need to switch some things around in the current Win7 that came with it, are can I do all that while installing Win7 on the SSD?

  Read the article

• Linux will not activate wireless after device has been re-enabled

  - by XHR

  Using a Eee 900A netbook by Asus. By pressing Fn + F2, I can disable or enable the wireless chip on the netbook, a blue LED indicates the status. I've been able to connect to wireless networks just fine with this netbook. However, if the wireless chip ever becomes disabled, I have to reboot to get my network connection back. This generally happens when suspending. For some reason the LED will be off and I have to hit Fn + F2 for it to light up again. However, after doing so, Linux will not reconnect to the network. It simply changes the wireless status from "wireless is disabled" to "device not ready". Even worse, I've recently had issues with the chip being enabled at boot, thus making it nearly impossible to get connected. I've searched around on-line but haven't found much of anything useful on this. This happens on all kinds of different distros including Ubuntu 9.10 Netbook, EeeBuntu 4 beta, Jolicloud and Ubuntu 10.04 Netbook.

  Read the article

• Why won't Windows use the other CPU cores?

  - by revloc02

  In Windows Task Manager the Performance tab shows the first CPU maxed out, the other 7 just idling along with the occasional spike. What gives? More info: I've got 8GB and only 4.5GB are being used. The Processes tab has no indication of any process hogging processing power. In fact System Idle Process is 98-99. When I program stuff and have like 8 to 12 applications going (several directly unrelated to programming of course) my computer slows to a crawl. Sysyem Info: Intel Core i7-2600K Processor (quad-core with hyper-threading), 8GB RAM, Intel BOXDZ68BC LGA 1155 Motherboard, 500GB HDD

  Read the article

• Windows freezes, showing a random color or pattern

  - by Manu

  I have a PC with windows 7, and I'm experiencing random freezes with increasing frequency. After some time (from 30 minutes to a few hours) the screen will shows a random color or pattern (vertical lines) and nothing works anymore, I need to reboot manually. I've checked the events log, but nothing is shown except for the unexpected reboot. I've tested the RAM with Memtest86+ 4.20, and the graphics card with FurMark 1.10.3, no errors have been found. I've updated the graphic drivers and openned the case to remove dust, but the issue is still there. Also, the problem doesn't seem to arise when I'm playing games fullscreen, but when I'm surfing the web, using itunes, or coding. My hardware is as follows : intel core i5 750 CPU, ATI Radeon HD 5670 graphics card, ASUSTeK P7P55D motherboard, two 2Gb KINGSTON DDR3 ram sticks, 2 SATA hard drives, a Netgear dongle for wifi.

  Read the article

• Can a consumer wireless router act as both a wireless client and access point?

  - by glibdud

  I'm going to be moving in the future, and integrating my home network into that of my landlord. I wish to maintain an isolated network while using his internet connection, so I'm planning on cascading my router off of his (WAN-to-LAN type configuration). Unfortunately, it looks like it might not be feasible to run a wire between the two. Therefore, I'd like to send my WAN connection over WiFi to his router. At my disposal, I have a WRT54GL (running Shibby's Tomato mod), and I just bought an Asus RT-N66U (I can be flexible with the firmware). My first thought was to set up the WRT as a wireless bridge, then run a wire between that and the N66U's WAN port. I'm reasonably sure I could make that work, but can I eliminate the WRT from the equation altogether? Can the N66U connect to the landlord's WiFi as a client, effectively using that as the WAN port, while simultaneously providing wireless access to my devices on an altogether different WLAN?

  Read the article

• Bay Speaker Panel Installation

  - by JordanD

  I purchased a bay speaker panel that has a molex connector and a sound connector. Do I need to run the sound connector through my tower and somehow out the back into the IO panel? Or is there supposed to be a place on my motherboard for it to connect to? This is a replacement for normal desktop speakers for me to save desk space. Edit: Is there an adapter for the sound cable to the mother board? If so; what is it called? Thanks

  Read the article

• Linux cannot alter partition table of main hard disk of my laptop

  - by djechelon

  I run openSUSE 12.2 on my ASUS N76VZ laptop. My problem is that I cannot alter the partition table of first hard disk /dev/sda1. YaST partitioner says it's unreadable, but actually it can read it but not alter it. It doesn't tell me anything else, except that I can wipe the partition table (having to reinstall Windows for the third time). Since I want to create new partitions on that disk, how do I fix the partition table layout? I could create new partition from Windows Computer Management and format them in Linux. I could do this, but it doesn't explain the problem

  Read the article

• Win7 Professional x64 16GB (4.99GB usable)

  - by Killrawr

  I've installed Corsair Vengeance CMZ16GX3M2A1600C10, 2x8GB, DDR3-1600, PC3-12800, CL10, DIMM and my BIOS picks up that there is 16GB, Windows says there is 16GB, CPU-z says there is 16GB. But it only says I can use 4.99GB out of 16GB. Motherboard is P55-GD65 (MS-7583) Supports four unbuffered DIMM of 1.5 Volt DDR3 1066/1333/1600*/2000*/2133* (OC) DRAM, 16GB Max Windows (Above screenshot specifies that I am on a System type: 64-bit OS) CPU-z Microsoft says that the physical memory limit on a 64 bit win7 professional operating system is 192GB. Dxdiag Run Command BIOS Screenshot #1 BIOS Screenshot #2 Why is my OS limiting me to just over a quarter of the available memory? is there anyway to increase it?

  Read the article

• Dell Precision 670 no booting

  - by fristson

  Our dell running xp did not boot one day and was making a beep code I had a hard time finding on the internet. It was one of the RAM sticks so i replaced it. Before that i removed the motherboard battery to see if there was a problem with the battery. Now at start up it tells me that No Logical Drives Found and then BIOS not installed!. I have read over alot of post here and other places but everyone is talking about installation of the OS. I just want it to start with what it had. Please help.

  Read the article

• Why aren't there 8gb RAM modules yet?

  - by user49951

  Why is RAM module development seemingly stuck at the same size for a while now (a couple of years)? I bought 2x2gb modules 2 years ago, and now it's all the same size, with prices even bigger. I want more memory, because I work a lot on my computer and I just need it. What is going on? Hardware/memory progress was being made constantly until these couple of years, and I'm a big computer user for over 15 years. Why isn't here 4gb/8gb modules yet? I would gladly replace my DDR2 motherboard for a DDRX one if it had at least 4gb DDRX modules for a reasonable price. Now we have a situation with very cheap usb drives reaching 64gb size, and a ram modules with pathetic 2gb size. Sounds like some sort of conspiracy.

  Read the article

< Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >