Search Results

Search found 2415 results on 97 pages for 'asus motherboard'.

Page 69/97 | < Previous Page | 65 66 67 68 69 70 71 72 73 74 75 76  | Next Page >

• Suspected power supply issue? PC repeatedly whirs for some seconds and then dies.

  - by benwebdev

  I've come home today and switched on the PC I've built a few months ago only for the machine to whir for a few short seconds and then die. It repeats this until I disconnect the power lead. Nothing is output to the screen and this cut out happens very quickly after switching it on. What could this be and how could it be fixed? Is it the power supply? I'm in despair :-( My spec is below, everything is new and was bought and assembled within the last 6months, system has been fantastic until now. Power Supply: 620W CoolerMaster Real Power M620 Motherboard: Gigabyte GA-X58A-UD3R Intel X58 (Socket 1366) DDR3 Processor: Intel Core i7 930 2.80GHz @ 4.00GHz RAM: 6GB DDR3 OS Windows 7 64bit Sapphire HD 5770 Vapor-X 1GB Graphics card 1TB Hitachi HDD 720GB Seagate Barracuda HDD 350GB Seagate Barracuda HDD EMu 0404 PCI Soundcard D-Link PCI-E wireless card Samsung DVD RW drive

  Read the article

• CPU fan making noise. heat sink or replace...

  - by user32185

  CPU fan is making noise ...i figured out reasons: Cable is hitting the fan causing a vibration. And may be also CPU fan is loose causing vibration... suggest options... i cleaned the fan ...but found that there is no heatsink compound /paste between processor and the fan..is it ok ..should i apply heat sink compound. How to correct the cable vibration... My processor is p4 2.4 ghz motherboard intel 845gvsr if i have to buy new fan ..which brand should i go for ..and estimated cost ?!

  Read the article

• Using 4 monitors with 2 generic video cards... possible?

  - by Ikram

  I'm thinking of setting up 4 monitors in a grid, using two video cards, one card to feed each pair of monitors through the card's two DVI ports. The most important requirement for me is to have the grid of monitors act as one single huge screen. Is this scenario possible by using two generic cards like Radeon 4870s on a Windows 7 computer? (I've heard of Eyefinity, but 4870s don't have it) Another issue is that I only have one PCI-Express slot on my computer's motherboard, therefore I'll need to use one of the lesser PCI cards as the second video card. Will this pose problems?

  Read the article

• Logitech bluetooth audio receiver quality

  - by lietus

  I bought a Logitech Bluetooth Audio receiver, and have run into a problem: When playing audio, it contains short hisses/clicks on higher tones or vocal+heavy instrumental music (Sound quality appears to be unclean). I'm not sure what could be the reason, but this only happens when I play from certain devices. My laptops (a Dell XPS Win7, and an Asus Eee seashell Win7) and my phone (Samsung Player 5) both have the problem. However, when I tried using a Samsung S2 phone, the audio was crystal clear. Seems that this could be something with Bluetooth transiting device.. Has anyone encountered a similar problem?

  Read the article

• Chipset GPU causes a massive slowdown

  - by zyboxenterprises

  My AMD Radeon HD 7700 recently broke (fan stopped working and GPU overheated), and now I'm running on internal chipset graphics, and it causes a massive slowdown of the whole PC. I've changed the graphics memory from 32MB (minimum) to 256MB (highest), and it hasn't made any difference whatsoever. I'm using Windows Aero, and disabling it should have made a small difference, but it didn't; the whole PC is still slow. I know that it's not the computer build, because I built it myself, and it was a lot faster when it had the AMD Radeon HD 7700 in it, which is the reason why I believe it's the internal chipset graphics that are causing the problem. Is this behavior normal? I don't have the cash right now to go out and buy a new dedicated GPU. I'm using an ASRock N68C-GS FX motherboard with an AMD FX 4100 (overclocked to 4.3GHZ), with 4GB RAM. The overclock was an attempt to resolve this issue, and it isn't related to this issue that the integrated graphics is causing a slowdown.

  Read the article

• Raid on ICH9R chip set

  - by user500982

  Hi Im looking at buyign this MB: http://www.supermicro.com/products/motherboard/ATOM/ICH9/X7SPE-HF-D525.cfm Im wondering though if the chipset will support the raid configuration I need. Im looking to configure the following arrays: raid array 1: 2 2TB Disks in Raid 0 raid array 2: 2 2TB Disks in Raid 0 raid array 3 (not actualy an array): 1 300GB Disk not in raid, to be used for OS and boot. So in total there would be 5 drives and the board supports 6. so im good when it comes to connections. However I have herd some chip sets only support one raid array (volume). so either all drives are individual, or are in the array. I must have 2 sperate raid arrays independent of each other, and a 5th drive not in any array. Anybody know if this setup will work? Thanks, -Stewart

  Read the article

• Why is my iPhone WIFI so slow at home?

  - by John Fouhy

  When my iPhone is connected to my home wireless network, the internet is unusably slow. I installed the speedtest.net application; here are some results from tonight: Down: 0.0kB/s, Up: 0.0kB/s, ping: 2230ms Down: 2.5kB/s, Up: 40.5kB/s, ping: 2182ms Down: 0.0kB/s, Up: 20.0kB/s, ping: 197ms For comparison, here is the result from my iMac to the same server, which is on the same wireless network (and has no wired connection): Down: 139kB/s, Up: 53.8kB/s, ping: 182ms Neither my iMac nor the Dell laptop also on the network have experienced the wifi problems I get with my iPhone. On the other hand, I tried browsing a website on the wireless network at work with no problems. EDIT: SpeedTest at work gives me 156kB/s down. EDIT2: Girlfriend (owner of the Dell) reports actually the internet is sometimes very slow. Perhaps there is more going on. No problems with my iMac. My router is a ASUS WL-500g Premium V2 running OpenWrt Kamikaze with X-Wrt Extensions 8.09.

  Read the article

• How do I import Outlook 2007 accounts and rules and IE usernames and stored passwords from old HD?

  - by raya

  I had an older PC running Win7 and the motherboard died on me. I've since updated my PC to another Win7 machine running a RAID 0 along with my old HDD installed as an extra drive. The problem is, I need to somehow import my Outlook email accounts (10) and rules along with my IE usernames and adjacent stored passwords for all the sites I've visited. I don't want to have to recreate the wheel for all this data. What I've found is that I have to run regedit in order to do so, but I cannot seem to boot to the old drive in order to run regedit and export the files. Can someone please help me?

  Read the article

• GPU Computing - # of GPUs supported

  - by TehTypoKing

  I currently have a desktop with 6 GPUs ( 3x HD 5970s ) in non-crossfire mode. Unfortunately, it seems that Windows 7 64bit only supports up to 4 GPUs. I have not been able to find a reliable source to deny or confirm this. If windows 7 has this limitation, is there a Linux flavor that supports more than 4 GPUs? In-case you are wondering, this is not for gaming but high-speed single precision computing. With this current setup ( if I can find 6gpu support ) I am looking to reach 13.8 Teraflops. Also, my motherboard does support 3 16x pci-xpress gen2 slots... and I have a 1500w powersupply plugged into a 20amp outlet. Windows is able to detect all 6 cores.. although, 2 of which displays the warning "Drivers failed to load". To recap: - Can windows support 6 GPUs? - If not, does Linux? Thank you.

  Read the article

• How can I upgrade Ubuntu from 9.10 to 10.04 on a netbook with a 4GB root partition?

  - by Blorgbeard

  I have an Asus EeePC 901, running Ubuntu 9.10. I'd like to upgrade it to 10.04. I don't want to reinstall, since I have a bunch of scripts and programs all set up. However, when I attempt to upgrade using sudo apt-get dist-upgrade, I get an error asking me to free up another ~600MB on /. My / is mounted on sda0, which is a 4GB SSD. I do not have 600MB worth of deletable stuff on /. I've emptied my trash, and done apt-get autoremove and apt-get clean. I do have plenty of space in /home, mounted on sda1 (a 16GB SSD). Is there some way I can tell apt-get to use a different download/temp directory?

  Read the article

• Wi-fi signal with keeping the internet cable

  - by daGrevis

  So the situation is that I have Ethernet cable which provides internet to my computer. Thing I want is to have wi-fi connection in my house and Ethernet cable (like I have before) to use for my PC. I will use wi-fi for my laptop and mobile phone. I think I need router for that and I'm looking at Asus RT-N16 (suggested in Coding Horror) for it, but I am not sure. Is it the right thing for me and I will be able to get wi-fi signal and keep the Ethernet cable? I guess the system will be that current cable goes into router, router provides wi-fi signal and gives back new cable... or something like that. Thanks in any advice! And sorry if topic isn't in right site.

  Read the article

• Ethernet 802.1x client -> WiFi AP on a Raspberry Pi?

  - by Martin Janiczek

  I have an Ethernet connection that requires 802.1x authentication (TTLS, MSCHAPv2, name+password). My goal is to connect that to something that would then act as an WiFi AP, so I can use the connection on more devices (iPhone, notebook, etc.) Would it be possible/good idea to use Raspberry Pi for this purpose? Or are there better-suited devices to do this? EDIT: found some alternatives but because of low rep can't post more than two links... OpenWRT + wpa_supplicant guide Carambola - works with OpenWRT (but probably not standalone?) Hornet-UB - works with OpenWRT Asus RT-N10+ + OpenWRT how-to EDIT 2: probably going to try TP-LINK TL-WR740N. It's a classic router, but can be flashed with OpenWRT, and the price beats everything else I've seen.

  Read the article

• Why doesn't my computer work at full speed?

  - by kubilas

  My motherboard is a Gigabyte GA-8I915PL-G with an Intel Pentium 4 630 3,0 GHz which doesn't run at it's default speed. It's currently at FSB 800, CPU Host 200 and CPU 3000 MHz; but sometimes it runs at FSB 533, CPU Host 133 and CPU 2025 MHz. Sometimes it's even at FSB 75 and CPU 1128 MHz. When I configure the default settings in Easy Tune then my computer doesn't work. Sometimes I need to clear the CMOS so I can set the default settings in the BIOS, but that doesn't always help. I've updated the BIOS, what else can I do to fix this problem?

  Read the article

• md5sum of large files gives different results sometimes

  - by Emanuele

  I have an AMD quad core, 8 gb RAM, 1 SSD EXT2 (2 months old), 2 HDD EXT4, approximately 1 year old. I'm using Ubuntu 10.04 x86-64 and when I compute the md5sum of large files (9 GB) sometimes I get different values than the one stored on a reference file. Upon restarting and switching off the PC then I get the expected results no matter how many times I repeat it. But this is random. I've turn on ECC (the fastest possible settings) and the issue seems to be rarer, but I've run memtest86+ for 6+ hours without a glitch (and with ECC off!). Any idea? Should I update the BIOS of my motherboard (Asus EVO-something...don't remember it now)? I've tried all the rest apart this, but genuinely don't know what to do anymore... Any suggestion is appreciated!

  Read the article

• Ethernet 802.1x client -> WiFi AP on a Raspberry Pi?

  - by Martin Janiczek

  I have an Ethernet connection that requires 802.1x authentication (TTLS, MSCHAPv2, name+password). My goal is to connect that to something that would then act as an WiFi AP, so I can use the connection on more devices (iPhone, notebook, etc.) Would it be possible/good idea to use Raspberry Pi for this purpose? Or are there better-suited devices to do this? EDIT: found some alternatives but because of low rep can't post more than two links... OpenWRT + wpa_supplicant guide Carambola - works with OpenWRT (but probably not standalone?) Hornet-UB - works with OpenWRT Asus RT-N10+ + OpenWRT how-to

  Read the article

• Long wait until POST...

  - by Wesley

  Here are the specs to put things into context: ECS P4VXASD2+ (V5.0) motherboard Intel Pentium 4 Northwood 2.8 GHz (512 KB L2, 533 MHz FSB) 2x 512 MB PC2100 DDR266 RAM 128 MB NVIDIA GeForce FX 5200 AGP WD Caviar SE 80 GB IDE HDD Gigabyte CD-RW drive OKIA 300W ATX PSU So, everytime I try to boot up this computer, it takes at least 10-15 seconds before it will POST. All my other machines will post within 1-2 seconds, but this one takes a particularly long time. I've read suggestions from a Google search to swap the CMOS battery, check BIOS settings, and double check CMOS jumper. Still after follow those, it takes a while to POST. What else could be causing a long delay before POSTing?

  Read the article

• How to update BIOS with efi?

  - by gasko peter

  We have a GA-H61M-DS2 rev 2.0 motherboard. It has an "F4" BIOS. We went to the vendors website: http://hu.gigabyte.com/products/page/mb/ga-h61m-ds2rev_20/download/bios and downloaded "F7", the latest BIOS version. We already tried: 1) "Efiflash.exe H61MDS22.F7" command from windows 7/32bit, it said nothing, the command line just flashed for a second.. 2) boot the win7 in "dos" mode (...) but the same thing happened. Q: How can we upgrade the BIOS? There aren't any ways for it?

  Read the article

• INtel SSD RAID Trim

  - by Mike Pateras

  I just found this article, that says that Intel now supports Trim for SSD RAIDs. It links to this download page. I'm pretty excited about that, but I'm a little confused. There seem to be two sets of drivers, an executable and something that's bootable. I ran the executable. Is that just to apply the drivers to my system now, and are the bootable drivers so that if I re-format, I won't have to re-run everything? Do I need to do both? And is there a way to check if it worked? I'm running an i7 in Windows 7 (ASUS P6T Deluxe Motherboard), if that's significant.

  Read the article

• Windows 7 Permissions

  - by Scott

  I have an odd problem with a windows 7 laptop. It's a single user installation currently. This is a fresh install on an Asus laptop. I have a svn repo checked out on my second partition. I have a directory which I have added to svn:ignore list, because it is for tmp files. This specific directory shows as read-only. I need write access on this directory for my project to function properly. If I right click and modify the directory to be not be read only and run this recursively, it simply is immediately reverted back to a read-only directory. I have also modified apache's service to run as myself to no avail. I'm stumped... Any ideas?

  Read the article

• Will my RAID0 stay intact when I move it to a new computer?

  - by Jeremy H

  My primary drive is a 250GB WD SATA drive. So, I added 2x 500GB 7,200 RPM WD SATA drives into my Windows Vista box and created a 1TB RAID0. I then formatted the the primary drive and installed Windows 7. To my pleasant surprise when I booted into Windows 7 my RAID0 was still intact and I kept trotting along the same as I did before. Now I am replacing my motherboard, processor, and RAM and plan on formatting the primary 250GB drive again and using it to boot for a new clean install of Windows 7. My question is: if I move these two SATA drives which are setup for RAID0 into the new system, install Windows 7 again, will the RAID0 remain? Edit: Software RAID. I created it within Windows. The RAID0 does NOT contain the system boot partition.

  Read the article

• How much power supply do I need for my server, and could a shortage be causing my odd crashing?

  - by dolan

  I have 5 servers, all with similar hardware (i7, four 2tb 7200rpm drives, two 4tb 5400rpm drives, 430 watt power supply), and lately the machines have been freezing up. This has gotten worse in the last day or so, and I can't pinpoint any explanation. One recent change was adding the two 4tb hard drives. The crashes happen most often while running a large Hadoop job, so I was originally thinking the load was causing some issues, but last night one server just froze without any heavy load on the box (or so I think), other than HDFS (Hadoop's distributed file system) was probably rebalancing itself since two of the five nodes were offline. If I plugin a monitor and keyboard to one of these frozen machines, I can't get any response or feedback on the screen. Any ideas on possible points of failure and/or different logs I can look at to investigate? Thanks Edit: The systems are running Ubuntu 10.04 Edit 2: More on hardware: intel core i7-930 bloomfield 2.8ghz processor (quad core) 12gb (6 x 2gb) kingston ddr3 1333 ram antec earthwatts green 430 power supply msi x58m lga 1366 motherboard

  Read the article

• Webpage / Other application does not fit fully on screen

  - by Frank Levebre

  I have an ASUS Eee PC 1008 HA The problem is that I have to move the cursor up/down in order to see the start control / icons at the bottom of the screen and the cursor up in order to see the menu bar / etc at the top of the screen, ie the whole page does not fit on the screen anymore. It has nothing to do with the zoom % in the bottom right hand corner. This also is the case whatever application I am running, ie Internet explorer , word, excel or whatever. Does anybody have an idea what is the problem and how I can resolve this?

  Read the article

• Could I replace a stock PSU fan with a more quiet one?

  - by GaryJL

  I have a cheap 450W PSU with an exhaust fan at the rear. This fan, however, is very loud. Is it a good idea to replace the stock PSU fan with a quiet fan with similar airflow? The PSU fan is hard-wired to the PCB in the PSU so I was intending on snipping the stock fan wires and sealing the loose ends with electrical tape. I would then connect the new quiet fan to the PWR_FAN socket on the motherboard. Has anyone done this before themselves? Is it a good idea in the first place? Considering if my PSU fails, it could take out a couple of other components too.

  Read the article

• Slow write speeds on new Gigabit home file server

  - by Ryan Holder

  So I finally got all my parts delivered to setup a home file/backup server this week. It's currently running Ubuntu Server and I'm using Samba to share files on my network. The server currently has a 2TB WD Green drive in it connected to a Asus M5A78L-M This is then connected via CAT6a to my new Gigabit switch (TP-Link TL-SG1005D). My home desktop is then also connected to this switch and again also through CAT6a cable. Currently when transfering files I will get a perfect 100MB/s read from the server to my Windows machine. When copying from my Windows machine to the server I get around 30/38MB/s. I know this drive is capable is faster speeds so would anybody have an idea of where the bottleneck is? Any help would be greatly appreciated :) EDIT: I have found ftp's write speed is much closer to what my Samba read speed is so I'm going to give it a guess that is a software problem rather than hardware

  Read the article

• Is a PCIE X1 card for USB 3.0 worth it?

  - by lelouch

  I have a portable HDD on USB 3.0, and soon I'll have a 32gb flash drive on USB 3.0 as well. My motherboard is pretty old - and the next time I'll upgrade it is when I get a new CPU/mobo/ram. Slots on my mobo: PCIE X16 - For my GTX 260 2xPCI PCIE X1 I'm considering purchasing a PCI express X1 card like this - http://www.ebay.com.au/itm/PC-Laptop-2-USB3-0-Ports-PCI-E-PCI-Express-X1-Card-New-/280772000446?pt=AU_Networking&hash=item415f50babe Now the question: What are realistic (read/write) speeds I'll get in this setup, assuming I have 1 USB 3 device connected at a time, and the bottleneck is the PCIE?

  Read the article

< Previous Page | 65 66 67 68 69 70 71 72 73 74 75 76  | Next Page >