Search Results

Search found 7601 results on 305 pages for 'auto ptr'.

Page 72/305 | < Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >

  • Setting up shared connection

    - by Calvin Froedge
    I have a network that is connected to the internet via a switch connected to a router. I have it setup like this so I can work on the new network without causing problems on the old. Anyway, I'm trying to enable internet connection sharing. Internet comes to server like this: Modem - Router - Switch - Ubuntu 11.10 (Eth0) I want to share the connection through Eth1 (Eth1 - Managed Switch - Clients). Here is my config for /etc/network/interfaces: I have a DHCP server running on Eth1. Here is my config: ddns-update-style none; option domain-name "myserver.local"; option domain-name-servers 192.168.1.2, 8.8.8.8; default-lease-time 600; max-lease-time 7200; authoritative; subnet 192.168.1.0 netmask 255.255.255.0 { interface eth1; range 192.168.1.3 192.168.1.254; option routers 192.168.1.1; option subnet-mask 255.255.255.0; option broadcast-address 192.168.1.255; } Here is /etc/network/interfaces: # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet dhcp #Used for internal network auto eth1 iface eth1 inet static address 192.168.1.2 netmask 255.255.255.0 broadcast 192.168.1.255 network 192.168.1.0 Here is /etc/hosts: 127.0.0.1 localhost 127.0.1.1 myserver.isp.com server 192.168.1.2 server.myserver.local server myserver.local In /etc/sysctl.conf, I've set the following: net.ipv4.ip_forward=1 Finally, in /etc/rc.local, I've set the following: /sbin/iptables -P FORWARD ACCEPT /sbin/iptables --table nat -A POSTROUTING -o eth1 -j MASQUERADE When I ping 8.8.8.8 (google's DNS) from a client that is authenticated with my DHCP server (they have been assigned a local ip, like 192.168.1.10), I get a timeout. How can I debug this further to figure out where my problem is?

    Read the article

  • Center Page Content Horizontally using Div with CSS

    - by Aamir Hasan
    Center your website content to create equal sized Space from  the left and right using css. Horizontally centered by setting its right and left margin widths to "auto". This is the preferred way to accomplish horizontal centering with CSS. Create a warpper div which will hold your content div and then give it a margin:auto attribute which will bring your warpper div into center of page.<html><head><title>Center Page Content Horizontally and Vertically using Div with CSS </title> <style type="text/css">body{background-color:#eaeaea;}  #wrapper {width: 777px;margin:auto}  #content{background-color:#00FF00;min-height:400px;}  </style>  </head>  <body>  <form id="form1" runat="server">  <div id="wrapper"> <div id="wrapper">  <div id="content">  Welcome to Studentacad.com  </div>  </div>  </form>  </body></html>

    Read the article

  • mdadm: breaks boot due to "is not ready yet or not present" error

    - by BarsMonster
    This is so damn frustrating :-| I've spent like 20 hours on this nice error, and seems like dozens of people over Internet too, and no clear solution yet. I have non-system RAID-5 of 5 disks, and it's fine. But during boot up it says that "/dev/md0 is not ready yet or not present" and asks to press 'S'. Very nice for Ubuntu Server - I have to bring monitor and keyboard to go next. After this system boots and it's all fine. md0 device works, /proc/mdstat is fine. When I do mount -a - it mounts this array without errors and works fine. As a dumb and shameful workaround I added noauto in /etc/fstab, and did mounting in /etc/rc.local - it works fine then. Any hints how to make it work properly? fstab: UUID=3588dfed-47ae-4c32-9855-2d69df713b86 /var/bigfatdisk ext4 noauto,noatime,data=writeback,barrier=0,nobh,commit=5 0 0 mdadm config: It is autogenerated: # mdadm.conf # # Please refer to mdadm.conf(5) for information about this file. # # by default, scan all partitions (/proc/partitions) for MD superblocks. # alternatively, specify devices to scan, using wildcards if desired. DEVICE partitions # auto-create devices with Debian standard permissions CREATE owner=root group=disk mode=0660 auto=yes # automatically tag new arrays as belonging to the local system HOMEHOST <system> # instruct the monitoring daemon where to send mail alerts MAILADDR CENSORED # definitions of existing MD arrays ARRAY /dev/md/0 metadata=1.2 bitmap=/var/md0_intent UUID=efccbeb6:a0a65cd6:470dcdf3:62781188 name=LBox2:0 # This file was auto-generated on Mon, 10 Jan 2011 04:06:55 +0200 # by mkconf 3.1.2-2

    Read the article

  • Common Live Upgrade problems

    - by user12611829
    As I have worked with customers deploying Live Upgrade in their environments, several problems seem to surface over and over. With this blog article, I will try to collect these troubles, as well as suggest some workarounds. If this sounds like the beginnings of a Wiki, you would be right. At present, there is not enough material for one, so we will use this blog for the time being. I do expect new material to be posted on occasion, so if you wish to bookmark it for future reference, a permanent link can be found here. Live Upgrade copies over ZFS root clone This was introduced in Solaris 10 10/09 (u8) and the root of the problem is a duplicate entry in the source boot environments ICF configuration file. Prior to u8, a ZFS root file system was not included in /etc/vfstab, since the mount is implicit at boot time. Starting with u8, the root file system is included in /etc/vfstab, and when the boot environment is scanned to create the ICF file, a duplicate entry is recorded. Here's what the error looks like. # lucreate -n s10u9-baseline Checking GRUB menu... System has findroot enabled GRUB Analyzing system configuration. Comparing source boot environment file systems with the file system(s) you specified for the new boot environment. Determining which file systems should be in the new boot environment. Updating boot environment description database on all BEs. Updating system configuration files. Creating configuration for boot environment . Source boot environment is . Creating boot environment . Creating file systems on boot environment . Creating file system for in zone on . The error indicator ----- /usr/lib/lu/lumkfs: test: unknown operator zfs Populating file systems on boot environment . Checking selection integrity. Integrity check OK. Populating contents of mount point . This should not happen ------ Copying. Ctrl-C and cleanup If you weren't paying close attention, you might not even know this is an error. The symptoms are lucreate times that are way too long due to the extraneous copy, or the one that alerted me to the problem, the root file system is filling up - again thanks to a redundant copy. This problem has already been identified and corrected, and a patch (121431-58 or later for x86, 121430-57 for SPARC) is available. Unfortunately, this patch has not yet made it into the Solaris 10 Recommended Patch Cluster. Applying the prerequisite patches from the latest cluster is a recommendation from the Live Upgrade Survival Guide blog, so an additional step will be required until the patch is included. Let's see how this works. # patchadd -p | grep 121431 Patch: 121429-13 Obsoletes: Requires: 120236-01 121431-16 Incompatibles: Packages: SUNWluzone Patch: 121431-54 Obsoletes: 121436-05 121438-02 Requires: Incompatibles: Packages: SUNWlucfg SUNWluu SUNWlur # unzip 121431-58 # patchadd 121431-58 Validating patches... Loading patches installed on the system... Done! Loading patches requested to install. Done! Checking patches that you specified for installation. Done! Approved patches will be installed in this order: 121431-58 Checking installed patches... Executing prepatch script... Installing patch packages... Patch 121431-58 has been successfully installed. See /var/sadm/patch/121431-58/log for details Executing postpatch script... Patch packages installed: SUNWlucfg SUNWlur SUNWluu # lucreate -n s10u9-baseline Checking GRUB menu... System has findroot enabled GRUB Analyzing system configuration. INFORMATION: Unable to determine size or capacity of slice . Comparing source boot environment file systems with the file system(s) you specified for the new boot environment. Determining which file systems should be in the new boot environment. INFORMATION: Unable to determine size or capacity of slice . Updating boot environment description database on all BEs. Updating system configuration files. Creating configuration for boot environment . Source boot environment is . Creating boot environment . Cloning file systems from boot environment to create boot environment . Creating snapshot for on . Creating clone for on . Setting canmount=noauto for in zone on . Saving existing file in top level dataset for BE as //boot/grub/menu.lst.prev. Saving existing file in top level dataset for BE as //boot/grub/menu.lst.prev. Saving existing file in top level dataset for BE as //boot/grub/menu.lst.prev. File propagation successful Copied GRUB menu from PBE to ABE No entry for BE in GRUB menu Population of boot environment successful. Creation of boot environment successful. This time it took just a few seconds. A cursory examination of the offending ICF file (/etc/lu/ICF.3 in this case) shows that the duplicate root file system entry is now gone. # cat /etc/lu/ICF.3 s10u8-baseline:-:/dev/zvol/dsk/panroot/swap:swap:8388608 s10u8-baseline:/:panroot/ROOT/s10u8-baseline:zfs:0 s10u8-baseline:/vbox:pandora/vbox:zfs:0 s10u8-baseline:/setup:pandora/setup:zfs:0 s10u8-baseline:/export:pandora/export:zfs:0 s10u8-baseline:/pandora:pandora:zfs:0 s10u8-baseline:/panroot:panroot:zfs:0 s10u8-baseline:/workshop:pandora/workshop:zfs:0 s10u8-baseline:/export/iso:pandora/iso:zfs:0 s10u8-baseline:/export/home:pandora/home:zfs:0 s10u8-baseline:/vbox/HardDisks:pandora/vbox/HardDisks:zfs:0 s10u8-baseline:/vbox/HardDisks/WinXP:pandora/vbox/HardDisks/WinXP:zfs:0 Solaris 10 9/10 introduces new autoregistration file This one is actually mentioned in the Oracle Solaris 9/10 release notes. I know, I hate it when that happens too. Here's what the "error" looks like. # luupgrade -u -s /mnt -n s10u9-baseline System has findroot enabled GRUB No entry for BE in GRUB menu Copying failsafe kernel from media. 61364 blocks miniroot filesystem is Mounting miniroot at ERROR: The auto registration file does not exist or incomplete. The auto registration file is mandatory for this upgrade. Use -k argument along with luupgrade command. autoreg_file is path to auto registration information file. See sysidcfg(4) for a list of valid keywords for use in this file. The format of the file is as follows. oracle_user=xxxx oracle_pw=xxxx http_proxy_host=xxxx http_proxy_port=xxxx http_proxy_user=xxxx http_proxy_pw=xxxx For more details refer "Oracle Solaris 10 9/10 Installation Guide: Planning for Installation and Upgrade". As with the previous problem, this is also easy to work around. Assuming that you don't want to use the auto-registration feature at upgrade time, create a file that contains just autoreg=disable and pass the filename on to luupgrade. Here is an example. # echo "autoreg=disable" /var/tmp/no-autoreg # luupgrade -u -s /mnt -k /var/tmp/no-autoreg -n s10u9-baseline System has findroot enabled GRUB No entry for BE in GRUB menu Copying failsafe kernel from media. 61364 blocks miniroot filesystem is Mounting miniroot at ####################################################################### NOTE: To improve products and services, Oracle Solaris communicates configuration data to Oracle after rebooting. You can register your version of Oracle Solaris to capture this data for your use, or the data is sent anonymously. For information about what configuration data is communicated and how to control this facility, see the Release Notes or www.oracle.com/goto/solarisautoreg. INFORMATION: After activated and booted into new BE , Auto Registration happens automatically with the following Information autoreg=disable ####################################################################### Validating the contents of the media . The media is a standard Solaris media. The media contains an operating system upgrade image. The media contains version . Constructing upgrade profile to use. Locating the operating system upgrade program. Checking for existence of previously scheduled Live Upgrade requests. Creating upgrade profile for BE . Checking for GRUB menu on ABE . Saving GRUB menu on ABE . Checking for x86 boot partition on ABE. Determining packages to install or upgrade for BE . Performing the operating system upgrade of the BE . CAUTION: Interrupting this process may leave the boot environment unstable or unbootable. The Live Upgrade operation now proceeds as expected. Once the system upgrade is complete, we can manually register the system. If you want to do a hands off registration during the upgrade, see the Oracle Solaris Auto Registration section of the Oracle Solaris Release Notes for instructions on how to do that. Technocrati Tags: Oracle Solaris Patching Live Upgrade var sc_project=1193495; var sc_invisible=1; var sc_security="a46f6831";

    Read the article

  • Have to run sudo dhclient eth0 automatically every boot

    - by Fyksen
    I just installed ubuntu 12.04.1 alternative install (for raid 0 on some disks). I Have some problems with the net. I'm at school, we use cable, and it got IPv6. If I run ifconfig eth0 heres my output: eth0 Link encap:Ethernet HWaddr e0:cb:4e:87:ff:db inet addr:128.39.194.217 Bcast:128.39.194.223 Mask:255.255.255.224 inet6 addr: 2001:700:1100:8008:e2cb:4eff:fe87:ffdb/64 Scope:Global inet6 addr: fe80::e2cb:4eff:fe87:ffdb/64 Scope:Link inet6 addr: 2001:700:1100:8008:48f7:c23:1d87:da6c/64 Scope:Global UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1063378 errors:0 dropped:0 overruns:0 frame:0 TX packets:489811 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1577173461 (1.5 GB) TX bytes:37043669 (37.0 MB) Interrupt:68 Base address:0x6000 My /etc/network/interfaces look like this: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 # NetworkManager#iface eth0 inet dhcp # NetworkManager#hostname 2001:700:1100:1::4 # This is an autoconfigured IPv6 interface iface eth0 inet6 auto (I had to remove the hash tags, because of the BIGFONT i get on ask ubuntu) The "network manager" says that I'm not connected. Let me know if you need any more information. :)

    Read the article

  • mdadm: brakes boot due to "is not ready yet or not present" error

    - by BarsMonster
    This is so damn frustrating :-| I've spent like 20 hours on this nice error, and seems like dozens of people over Internet too, and no clear solution yet. I have non-system RAID-5 of 5 disks, and it's fine. But during boot up it says that "/dev/md0 is not ready yet or not present" and asks to press 'S'. Very nice for Ubuntu Server - I have to bring monitor and keyboard to go next. After this system boots and it's all fine. md0 device works, /proc/mdstat is fine. When I do mount -a - it mounts this array without errors and works fine. As a dumb and shameful workaround I added noauto in /etc/fstab, and did mounting in /etc/rc.local - it works fine then. Any hints how to make it work properly? fstab: UUID=3588dfed-47ae-4c32-9855-2d69df713b86 /var/bigfatdisk ext4 noauto,noatime,data=writeback,barrier=0,nobh,commit=5 0 0 mdadm config: It is autogenerated: # mdadm.conf # # Please refer to mdadm.conf(5) for information about this file. # # by default, scan all partitions (/proc/partitions) for MD superblocks. # alternatively, specify devices to scan, using wildcards if desired. DEVICE partitions # auto-create devices with Debian standard permissions CREATE owner=root group=disk mode=0660 auto=yes # automatically tag new arrays as belonging to the local system HOMEHOST <system> # instruct the monitoring daemon where to send mail alerts MAILADDR CENSORED # definitions of existing MD arrays ARRAY /dev/md/0 metadata=1.2 bitmap=/var/md0_intent UUID=efccbeb6:a0a65cd6:470dcdf3:62781188 name=LBox2:0 # This file was auto-generated on Mon, 10 Jan 2011 04:06:55 +0200 # by mkconf 3.1.2-2

    Read the article

  • How can I make an unmounted / unmountable NTFS disk not show up in the nautilus devices area?

    - by Dennis
    I have an idea that my /etc/fstab is a real mish-mash and I don't remember how it got that way, first of all it looks like this UUID=9EB80807B807DD21 /media/Storage ntfs-3g users 0 0 UUID=a60397fd-964a-45b1-ad35-53c8a4bee010 / ext4 defaults 0 1 UUID=1764825d-b8ba-4620-b3b0-e979b6f4f5c4 swap swap sw 0 0 UUID=255DA1E406E29DBC /media/sda2 ntfs-3g defaults 0 0 UUID=2CCCF161CCF1262C /mnt/sda1 ntfs-3g umask=000 0 0 /dev/fd0 /media/floppy0 vfat noauto 0 0 I started with an old XP install on disk /dev/sda that I don't use anymore but didn't want to delete, so I shrunk the XP partition, added a NTFS partition that would be common to both systems (Labeled it "Common" in XP), then installed Lucid on an extended ext4 partition. On this disk of course the ext4 system partition comes up as /, the go between partition auto-mounts on /media/sda1 but shows up in Nautilus as COMMOM, while the XP system disk does not show up in Nautilus, but I can get to it by navigating to /mnt/sda1. A second hard drive (/dev/sdb) that I stuck in was already formatted NTFS with a bunch of stuff and labeled "Storage". It auto-mounts to /media/Storage but another un-mounted disk also shows up in the Nautilus device area called Storage but it can't be mounted (Here and in the "Places" are the only times it appears) I would primarily like this non-existant (or already mounted depending on how you look at it) disk to not show up, but I wouldn't mind an explanation of why one labeled partition auto-mounts to a /media mount point but shows up by label, one does not show up as mounted at all but mounts to a /mnt mount point and is there for navigation, and one is mounted to a directory of the same name as the label. I would love to have some consistancy / direction on what is proper in this circumstance. No doubt I caused this with the fstab but I really don't remember what my rational was if I edited it manually

    Read the article

  • How can I make multiple displays work on my Asus UX32VD?

    - by oKtosiTe
    Original title: Why do I have two trash icons in the Unity Launcher? Whether I run Ubuntu as a live-USB or install it, I always have two trash bins on the Unity Launcher. Both work, and both open the same location. This seems a bit redundant; what could be done about it? Update: Turning auto-hide on made it obvious that I have multiple Launchers showing. With auto-hide off, they simply overlap, making it look like there's a double trash icon, but with auto-hide enabled, I can display one Launcher (and therefore one trash icon) at a time. Still, two are running simultaneously. Second update: This problem appears to be caused by the way Ubuntu handles multiple displays on my Asus UX32VD Ultrabook. Somehow, the laptop display cannot be used while my external display is connected. It is shown in the Displays list, but remains black no matter how I configure it. The external display runs at 1920x1200, the laptop monitor should run at 1920x1080. It therefore becomes obvious that the Launcher that's supposed to run on the laptop display, is actually displayed on the external monitor. Using nomodeset as a kernel parameter as indicated here makes the laptop display inaccessible altogether, detecting the external monitor as the laptop display and making resolutions other than 1920x1200 inaccessible. That is not an option.

    Read the article

  • Java JRE 7 Automatic Upgrade and Demantra Requirements - Action Required

    - by user702295
    The following applies to ALL Demantra, EBS and Demantra Oracle Integrations: All EBS desktop administrators must disable JRE Auto-Update for their end-users immediately. See this externally-published article:     URGENT BULLETIN: Disable JRE Auto-Update for All E-Business Suite End-Users     https://blogs.oracle.com/stevenChan/entry/bulletin_disable_jre_auto_update Why is this required? If you have Auto-Update enabled, your JRE 1.6 version will be updated to JRE 7.     This may happen as early as July 3, 2012.     This will definitely happen after Sept. 7, 2012, after the release of 1.6.0_35 (6u35).  Oracle Forms is not compatible with JRE 7 yet.  JRE 7 has not been certified with Oracle E-Business Suite yet. Oracle E-Business Suite functionality based on Forms -- e.g. Financials -- will stop working if you upgrade to JRE 7. Related News Java 1.6.0_33 is certified with Oracle E-Business Suite.  See this externally-published article:     Java JRE 1.6.0_33 Certified with Oracle E-Business Suite     https://blogs.oracle.com/stevenChan/entry/jre_1_6_0_33

    Read the article

  • Python Web Applications: What is the way and the method to handle Registrations, Login-Logouts and Cookies? [on hold]

    - by Phil
    I am working on a simple Python web application for learning purposes. I have chosen a very minimalistic and simple framework. I have done a significant amount of research but I couldn't find a source clearly explaining what I need, which is as follows: I would like to learn more about: User registration User Log-ins User Log-outs User auto-logins I have successfully handled items 1 and 3 due to their simple nature. However, I am confused with item 2 (log-ins) and item 4 (auto-logins). When a user enters username and password, and after hashing with salts and matching it in the DB; What information should I store in the cookies in order to keep the user logged in during the session? Do I keep username+password but encrypt them? Both or just password? Do I keep username and a generated key matching their password? If I want the user to be able to auto-login (when they leave and come back to the web page), what information then is kept in the cookies? I don't want to use modules or libraries that handle these things automatically. I want to learn basics and why something is the way it is. I would also like to point out that I do not mind reading anything you might offer on the topic that explains hows and whys. Possibly with algorithm diagrams to show the process. Some information: I know about setting headers, cookies, encryption (up to some level, obviously not an expert!), request objects, SQLAlchemy etc. I don't want any data kept in a single web application server's store. I want multiple app-servers to be handle a user, and whatever needs to be kept on the server to be done with a Postgres/MySQL via SQLAlchemy (I think, this is called stateless?) Thank you.

    Read the article

  • Wine causes twin view to break

    - by deanvz
    I have endlessly been playing around with the Nvidia X Server settings and changing my xorg.conf file to try and work for me and on most days its fine. In each instance I get it working for a while and then this morning the most bizarre thing happens. The moment I open any type of Wine program (which never use to be a problem) my Twin View setup disappears and am left with mirrored displays. I try and change the settings in the Nvidia driver, but its not interested and the screens remain mirrored. I have a work around. Restart my pc... Below are the contents of my current xorg.conf file. # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 295.33 (buildd@zirconium) Fri Mar 30 13:43:34 UTC 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "LG Electronics W1934" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 9400 GT" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "metamodes" "CRT-0: nvidia-auto-select +0+0, CRT-1: nvidia-auto-select +1440+0" SubSection "Display" Depth 24 EndSubSection EndSection

    Read the article

  • OSSEC HIDS Notification "Unknown problem somewhere in the system." (seems like hdd issue)

    - by John
    from what i understand somethings is wrong with hdd i am trying to find some commands in order to run some tests to check if hard disk is OK I will post a full list of logs after REBOOT of system: "Unknown problem somewhere in the system." kernel: ata2.00: failed command: READ FPDMA QUEUED kernel: res 51/40:c8:38:5c:16/00:00:00:00:00/40 Emask 0x409 (media error) <F> kernel: ata2.00: error: { UNC } kernel: ata2.00: failed command: READ FPDMA QUEUED kernel: res 51/40:78:88:5c:16/00:00:00:00:00/40 Emask 0x409 (media error) <F> kernel: sd 1:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] kernel: sd 1:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed kernel: md/raid1:md1: read error corrected (8 sectors at 1461400 on sda1) kernel: sd 1:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed kernel: sd 1:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed kernel: md/raid1:md1: read error corrected (8 sectors at 1461672 on sda1) Also some of this logs are duplicate or even more. Thanks.

    Read the article

  • Cannot get script to run at startup (tried all the simple answers)

    - by Carey Head
    I have Ubuntu Desktop 12.04 LTS running great on an older Acer desktop. I want to use this machine as an in-home server for hosting Minecraft. The command to start the Minecraft server is java -Xmx1024M -Xms1024M -jar minecraft_server.jar nogui and that works great when I cd into the correct directory and execute the above. I created a script to do this: #!/bin/bash cd /home/myuser/minecraft-server1 java -Xmx1024M -Xms1024M -jar minecraft_server.jar nogui & cd /home/myuser/minecraft-server2 java -Xmx1024M -Xms1024M -jar minecraft_server.jar nogui & exit 0 I made this .sh file executable, and it too runs great when I start it manually from the terminal. The problem I'm having is getting these to execute at startup. I have my user account on this machine to auto login. I have tried the following: Adding the following to "Startup Applications" : sh /home/myuser/myscript.sh (Nothing happens on reboot) Adding the same to /etc/rc.local (Nothing happens on reboot). I even tested this one by running /etc/rc.local from the terminal, and it executed great. Just not at boot/auto login Added the lines from the script directly to rc.local (Nothing happens on reboot). I can't help but think that there's something I'm missing. The script executes great when run manually, but will not run at boot/auto login. Many thanks in advance.

    Read the article

  • xubutnu Nvidia Settings not remembered

    - by hozza
    I have an Nvidia card and I'm using NVIDIA Driver Version: 304.51 and the NVIDIA X Server Settings GUI. Everything works fine but when I reboot and login again both my two screens are set to +0 +0 so they mirror each other... I change the settings to screen 2 (NEC LED) to be left of screen 1 (DELL) click Apply and Save to X Configuration File... It all works but when I login again the settings are not remembered... This is my xorg config file, can anyone help out? # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 304.51 (buildd@komainu) Fri Oct 12 12:53:49 UTC 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL 2005FPW" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 640" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "Stereo" "0" Option "nvidiaXineramaInfoOrder" "DFP-0" Option "metamodes" "DFP-0: nvidia-auto-select +1280+0, DFP-2: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

    Read the article

  • noexec option enabled in fstab is not getting applicable for limited user. Is it a bug?

    - by user170918
    noexec option enabled in fstab is not getting applicable for limited user. Is it a bug? cat /etc/fstab # / was on /dev/sda2 during installation UUID=fd7e2645-3cc4-4c6c-8b1b-016711c2fd07 / ext4 errors=remount-ro 0 1 # /boot was on /dev/sda1 during installation UUID=f3e58f86-8999-4678-a5ec-0a4b621c6e37 /boot ext4 defaults 0 2 # /home was on /dev/sda9 during installation UUID=bcbc1c4d-46a9-4b2a-bb0a-6fe1bdeaed22 /home ext4 defaults,nodev,nosuid 0 2 # /tmp was on /dev/sda5 during installation UUID=8538eecc-bd16-40fe-ad66-7d7b9287839e /tmp ext4 defaults,noexec,nosuid,nodev 0 2 # /var was on /dev/sda6 during installation UUID=292696cf-fc15-40ab-9cd8-cee9bff7e165 /var ext4 defaults,nosuid,nodev 0 2 # /var/log was on /dev/sda7 during installation UUID=fab1f85b-ae09-4ce0-b169-c01205eb8f9c /var/log ext4 defaults,noexec,nosuid,nodev 0 2 # /var/log/audit was on /dev/sda8 during installation UUID=602f5003-4ac0-49e9-99d3-b29378ce9430 /var/log/audit ext4 defaults,noexec,nosuid,nodev 0 2 # swap was on /dev/sda3 during installation UUID=a538d35b-b2e9-47f2-b72d-5dbbcf0afca0 none swap sw 0 0 /dev/sdb1 /mnt/usblpsc auto noauto,user,rw,noexec,nosuid,nodev 0 0 /dev/sdc1 /mnt/usblpsc auto noauto,user,rw,noexec,nosuid,nodev 0 0 /dev/sdd1 /mnt/usblpsc auto noauto,user,rw,noexec,nosuid,nodev 0 0 sudo users are not able to paste executable files in /bin into the file system which have the noexec option set. But limited users are able to paste the same files into the file system which have noexec option set. Why is it so?

    Read the article

  • Ubuntu 13.10. After login, no desktop displayed. Two Nvidia Graphics Cards, Four Monitors

    - by jmerkow
    I am working on an issue with my Ubuntu 13.10 installation. I am attempting to get 4 monitors up and running but I am having some trouble. So far, I installed and updated to the latest NVIDIA drivers (331.20). Initially X would not start (after installation) so I replaced my xorg.conf with xorg.conf.failsafe. This fixed that problem, but then I tried to enable the other 2 monitors (other video card) and xorg fails to start once again (after I login there is no desktop). I am fairly new to linux but I am not a complete beginner, but I'm not comfortable poking around too much on my own to troubleshoot yet.... lspci -nn | grep VGA: 03:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF110 [GeForce GTX 570 Rev. 2] [10de:1086] (rev a1) 05:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF110 [GeForce GTX 580] [10de:1080] (rev a1) It seems that the nvidia-settings tool does not result in a good xorg.conf file. Here it is: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 331.20 (buildmeister@swio-display-x86-rhel47-05) Wed Oct 30 18:20:32 PDT 2013 Section "ServerLayout" Identifier "Default Layout" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "1" EndSection ... Section "Monitor" Identifier "Configured Monitor" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "SHARP HDMI" HorizSync 15.0 - 68.0 VertRefresh 55.0 - 76.0 EndSection Section "Monitor" Identifier "Monitor1" VendorName "Unknown" ModelName "Samsung SyncMaster" HorizSync 0.0 - 0.0 VertRefresh 0.0 EndSection Section "Device" Identifier "Configured Video Device" Driver "vesa" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 570" BusID "PCI:3:0:0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 580" BusID "PCI:5:0:0" EndSection Section "Screen" Identifier "Default Screen" Device "Configured Video Device" Monitor "Configured Monitor" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "Stereo" "0" Option "nvidiaXineramaInfoOrder" "DFP-1" Option "metamodes" "HDMI-0: nvidia-auto-select +640+0, DVI-I-3: nvidia-auto-select +0+1080" Option "SLI" "Off" Option "MultiGPU" "Off" Option "BaseMosaic" "off" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "Stereo" "0" Option "metamodes" "DVI-I-2: nvidia-auto-select +0+0" Option "SLI" "Off" Option "MultiGPU" "Off" Option "BaseMosaic" "off" SubSection "Display" Depth 24 EndSubSection EndSection Section "Extensions" Option "Composite" "Disable" EndSection

    Read the article

  • Jqgrid search option not working and edit popups not closed after submit

    - by Sajith
    i have facing two problem in Jqgrid. Search option not working and there is not closed editpopups after submit. my code below <table id="jQGridpending" style="width:auto"> </table> <div id="jQGridpendingPager"> </div> <table id="searchpending"></table> <div id="filterpending"></div> jQuery("#jQGridpending").jqGrid({ url: '@Url.Action("DiscountRequest", "Admin")', datatype: "json", mtype: "POST", colNames: [ "Id", "ClientName", "BpName", "Pdt", "DiscountReq", "DiscountAllowed", "Status", ], colModel: [ { name: "Id", width: 100, key: true, formatter: "integer", sorttype: "integer", hidden: true }, { name: "ClientName", width: 150, sortable: true,search:true,stype:'text', editrules: { required: false } }, { name: "BpName", width: 200, sortable: true, editable: false, editrules: { required: false } }, { name: "Pdt", width: 150, sortable: true, editable: false, editrules: { required: false } }, { name: "DiscountReq", width: 150, sortable: false, editable: false, editrules: { required: false } }, { name: "DiscountAllowed", width: 200, sortable: true, editable: true, editrules: { required: true } }, { name: 'Status', index: 'Status', width: 200, sortable: false, editable: true, formatter: 'select', edittype: 'select', editoptions: { value: "pending:pending;approved:approved;rejected:rejected" } }, @* { name: "Status", width: 200, sortable: false, editable: true, editrules: { required: true, minValue: 1, }, edittype: "select", editoptions: { async: false, dataUrl: "@Url.Action("GetStatus", "Admin")", buildSelect: function (response) { var s = "<select>"; s += '<option value="0">--Select--</option><option value="pending">pending</option>'; return s + "</select>"; } } },*@ //{ name: "Status", width: 150, sortable: true, editable: true, editrules: { required: true } }, //{ name: "Created", width: 120, formatter: "date", formatoptions: { srcformat: "ISO8601Long", newformat: "n/j/Y g:i:s A" }, align: "center", sorttype: "date" }, ], loadtext: "Processing pending request data please wait...", rowNum: 10, gridview: true, autoencode: true, loadonce: true, height: "auto", rownumbers: true, prmNames: { id: "Id" }, rowList: [10, 20, 30], pager: '#jQGridpendingPager', sortname: 'id', sortorder: "asc", viewrecords: true, jqModal: true, caption: "Pending List", reloadAfterSubmit: true, editurl: '@Url.Action("UpdateDiscount", "Admin")', }); jQuery("#jQGridpending").jqGrid('navGrid', '#jQGridpendingPager', { search: true,recreateFilter: true, add: false, searchtext: "Search", edittext: "Edit", deltext: "Delete", }, {//EDIT url: '@Url.Action("UpdateDiscount", "Admin")', width: "auto", jqModal: true, closeOnEscape: true, closeAfterEdit: true, reloadAfterSubmit: true, afterSubmit: function () { // Reload grid records after edit a entry in the db. $(this).jqGrid('setGridParam', { datatype: 'json' }); return [true, '', false]; }, }, {//DELETE url: '@Url.Action("DelDiscount", "Admin")', closeOnEscape: true }, {//SEARCH closeOnEscape: true, searchOnEnter: true, multipleSearch: true, //overlay: 0, width: "auto", height: "auto", });

    Read the article

  • Header Div Position Edit according to Content Div

    - by Melih Mucuk
    I want to design my web site. I have two main div, one of them "header", other "content". I want to set width property:80% and I set center for both of them. But I don't do that. Other question about header div. I uploaded an image and I want to design like this. How can I do all of them? My CSS: #main { margin:0px auto; margin-left:50px; margin-right:50px; margin-top:25px; margin-bottom:25px; height:auto; text-align:center;} #content { width:80%; height:auto; margin:0px auto; } #header { width:80%; height:100px; top:20px; } #header_left { float:left ; height: 100px; text-align: center; } #header_right { margin:0px auto; height:30px; text-align:center; margin-top:35px; } #header_social { float:right; height:30px; text-align:center; margin-top:35px;} My client code: <div id="main"> <div id="content"> <div id="header"> <div id="header_left"> <asp:Image ID="Image1" runat="server" /> </div> <div id="header_right"> <asp:LinkButton ID="LinkButton5" runat="server" ForeColor="Gray"></asp:LinkButton>&nbsp;| <asp:LinkButton ID="LinkButton4" runat="server" ForeColor="Gray" ></asp:LinkButton>&nbsp;| <asp:LinkButton ID="LinkButton3" runat="server" ForeColor="#FF3300" ></asp:LinkButton>&nbsp;| <asp:LinkButton ID="LinkButton2" runat="server" ForeColor="Gray" ></asp:LinkButton>&nbsp;| <asp:LinkButton ID="LinkButton1" runat="server" ForeColor="Gray" ></asp:LinkButton> </div> <div id="header_social"> <asp:ImageButton ID="ImageButton1" runat="server"/> <asp:ImageButton ID="ImageButton2" runat="server"/> </div> </div> ******CONTENT FIELD***** </div> </div>

    Read the article

  • How do I make a rectangle move in an image?

    - by alicedimarco
    Basically I have an image loaded, and when I click a portion of the image, a rectangle (with no fill) shows up. If I click another part of the image again, that rectangle will show up once more. With each click, the same rectangle should appear. So far I have this code, now I don't know how to make the image appear. My image from my file directory. I have already made the code to get the image from my file directory. import java.awt.Color; import java.awt.Graphics; import java.awt.event.MouseEvent; import java.awt.event.MouseListener; import javax.swing.JFrame; import javax.swing.JOptionPane; import javax.swing.JPanel; public class MP2 extends JPanel implements MouseListener{ JFrame frame; JPanel panel; int x = 0; int y = 0; String input; public MP2(){ } public static void main(String[] args){ JFrame frame = new JFrame(); MP2 panel = new MP2(); panel.addMouseListener(panel); frame.add(panel); frame.setSize(200,200); frame.setVisible(true); } public void mouseClicked(MouseEvent event) { // TODO Auto-generated method stub this.x = event.getX(); this.y = event.getY(); this.repaint(); input = JOptionPane.showInputDialog("Something pops out"); System.out.println(input); } public void mouseEntered(MouseEvent arg0) { // TODO Auto-generated method stub } public void mouseExited(MouseEvent arg0) { // TODO Auto-generated method stub } public void mousePressed(MouseEvent arg0) { // TODO Auto-generated method stub } public void mouseReleased(MouseEvent arg0) { // TODO Auto-generated method stub } public void paintComponent(Graphics g){ super.paintComponent(g); // this.setBackground(Color.white); *Sets the bg color of the panel g.setColor(new Color(255,0,0)); g.drawRect(x, y, 100, 100); } }

    Read the article

  • Why doesn't the .click() not work in this instance?

    - by Deshiknaves
    Basically what this does is fadeIn pre-existing divs and then loads an image. When the image is loaded it then appends that into one of the pre-existing divs. Then it appends a new div with an id of xButton. Then later it $('#xButton').click() should hide the 3 divs. However it just doesn't work. If I change the click() to either #modalImage or #overlay, it works but just not for the #xButton. I would really like to figure out why its not working and how I should be doing this instead. Thanks. $(function(){ $('#container a').click(function(e){ e.preventDefault(); var id = $(this).attr('href'), img = new Image(); $('#overlay').fadeIn(function(){ $('#modalImage').fadeIn(); }); $(img).load(function(){ $(this).hide(); $('#modalImage').removeClass('loader').append(this); $(this).fadeIn(function(){ var ih = $(this).outerHeight(), iw = $(this).outerWidth(), newH = ($(window).height()/10)*7, newW = ($(window).width()/10)*7; if (ih >= iw && ih >= newH) { $(this).css('height',newH + 'px'); $(this).css('width', 'auto'); } else if (ih >= iw && newH > ih) { $(this).css('height', ih + 'px'); $(this).css('width', 'auto'); } else if (iw > ih && iw >= newW) { if ((newW / (iw / ih)) > newH) { $(this).css('width', 'auto'); $(this).css('height', newH + 'px'); } else { $(this).css('width', newW + 'px'); $(this).css('height', 'auto'); } } else { $(this).css('width', iw + 'px'); $(this).css('height', 'auto'); } var padW = ($(window).width() - $(this).outerWidth()) / 2, padH = ($(window).height() - $(this).outerHeight()) / 2; console.log (padH + ' ' + padW); $(this).css('top', padH); $(this).css('left', padW); if($('#overlay').is(":visible") == true) { ih = ih + 4; $('<div id="xButton">x</div>').appendTo('#modalImage'); if (padH >= 0) { $('#xButton').css('top', padH - 4).css('right', padW - 65); } else { $('#xButton').css('top', '20px').css('right', padW - 65); } } }); }).attr('src', id); }); $('#xButton').click(function(){ $(this).hide(); $('#overlay').fadeOut(function(){ $('#modalImage img').css('top', '-9999px').remove(); $('#xButton').remove(); $('#modalImage').addClass('loader'); }); }); });

    Read the article

  • 5.5.0 smtp;554 transaction failed spam message not queued

    - by Miguel
    Some users are trying to send email to certain domains using Exchange Server 2003, but the message is always is rejected and the following message is shown: 5.5.0 smtp;554 Transaction Failed Spam Message not queued The IP is not in a black list (checked using http://whatismyipaddress.com/blacklist-check and is clean - not listed). The emails were checked using using smtpdiag ("a troubleshooting tool designed to work directly on a Windows server with IIS/SMTP service enabled or with Exchange Server installed") and the connection using port 25 is ok. Also, an nslookup with set type=ptr shows (names and IP changed, "" means I typed something): C:\Documents and Settings\administrator>nslookup Default Server: publicdns.isp.net Address: 10.10.10.10 > server publicdns.isp.net Default Server: publicdns.isp.net Address: 10.10.10.10 > set type=ptr >mydomain.com Server: publicdns.isp.net Address: 10.10.10.10 mydomain.com primary name server = publicdns.isp.net responsible mail addr = root.isp.net serial = 2011061301 refresh = 10800 (3 hours) retry = 3600 (1 hour) expire = 604800 (7 days) default TTL = 86400 (1 day) > 20.21.22.23 Server: publicdns.isp.net Address: 10.10.10.10 23.22.21.20.in-addr.arpa name = mail.mydomain.com 20.21.in-addr.arpa nameserver = publicdns.isp.net 20.21.in-addr.arpa nameserver = publicdns2.isp.net publicdns2.isp.net internet address = 10.10.10.11 publicdns.isp.net internet address = 10.10.10.10 Server: publicdns.isp.net Address: 10.10.10.10 23.22.21.20.in-addr.arpa name = mail.mydomain.com 20.21.in-addr.arpa nameserver = publicdns.isp.net 20.21.in-addr.arpa nameserver = publicdns2.isp.net publicdns2.isp.net internet address = 10.10.10.11 publicdns.isp.net internet address = 10.10.10.10 > set type=mx > mydomain.com Server: publicdns.isp.net Address: 10.10.10.10 mydomain.com MX preference = 10, mail exchanger = mail.mydomain.com mydomain.com nameserver = publicdns.isp.net mydomain.com nameserver = publicdns2.isp.net mail.mydomain.com internet address = 20.21.22.23 publicdns2.isp.net internet address = 10.10.10.11 publicdns.isp.net internet address = 10.10.10.10 > set type=a > mydomain.com Server: publicdns.isp.net Address: 10.10.10.10 Nombre: mydomain.com Address: 20.21.22.23 When I test the spf record with http://www.mxtoolbox.com it shows: TXT mydomain.com 24 hrs v=spf1 a mx ptr ip4:20.21.22.23 mx:mail.mydomain.com -all Any clues of what's happening here?

    Read the article

  • configure Reverse DNS for VPS with amazon route 53, ISP or Amazon Route 53 issue?

    - by Oscar Cabrero
    i have a VPS hosted with myhosting.com, the domain is hosted in godaddy and the DNS records are managed in AMAZON route 53. i was told by myhosting support that i should create a PTR record on my DNS but i have read that in order to reverse DNS for an IP this record should be created in the ISP records wich sounds have sense. because if i want to get the domain name via an IP the request will never be forwarded to AMAZON instead it will ask the ISP for it am i rigth or MyHosting support is correct and i should setup PTR record on Amazon which i already did THANKS Oscar

    Read the article

  • How would I setup reverse DNS for 2 email servers?

    - by Solignis
    I have an interesting DNS question (well interesting to me atleast). I just installed an hmail server in our remote office to act as an MX backup in the event our exchange server goes down. The 2 host names are mail.campbellsurvey.com mail2.campbellsurvey.com mail points to the address 98.XXX.91.XXX mail2 points to the address 70.XXX.190.XXX How would I setup a PTR record on the ISP end to reflect both hostnames? Does the PTR have to point to EXACTLY mail.campbellsurvey.com or can it point to just campbellsurvey.com? because right now anything passing through the primary static address in our pool (the one used for standard internet) is identified as mail.campbellsurvey.com. My only idea to fix this was to move the mail server to the next available address and give it only it the name mail.campbellsurvey.com but I wanted to see if there was another way. Thanks in advance.

    Read the article

  • Help with Windows 7 BSOD with windbg minidump !analyze -v results

    - by Kurt Harless
    Hi gang, Windows 7 X64 Ultimate is BSODing occasionally. I suspect an overheating issue or something related to the use of my GTX-295 card that runs very hot. Here is an !analyze -v listing of the most recent minidump. Any and all help greatly appreciated. Kurt Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64 Copyright (c) Microsoft Corporation. All rights reserved. Loading Dump File [C:\Windows\Minidump\122810-31387-01.dmp] Mini Kernel Dump File: Only registers and stack trace are available Symbol search path is: SRV*c:\websymbols*http://msdl.microsoft.com/download/symbols Executable search path is: Windows 7 Kernel Version 7600 MP (8 procs) Free x64 Product: WinNt, suite: TerminalServer SingleUserTS Built by: 7600.16617.amd64fre.win7_gdr.100618-1621 Machine Name: Kernel base = 0xfffff800`03065000 PsLoadedModuleList = 0xfffff800`032a2e50 Debug session time: Tue Dec 28 11:04:03.597 2010 (UTC - 7:00) System Uptime: 2 days 2:28:40.407 Loading Kernel Symbols ............................................................... ................................................................ .............................................. Loading User Symbols Loading unloaded module list ................ ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* Use !analyze -v to get detailed debugging information. BugCheck 3B, {c0000005, fffff800033b8873, fffff8800e322dc0, 0} Probably caused by : ntkrnlmp.exe ( nt!RtlCompareUnicodeStrings+c3 ) Followup: MachineOwner --------- 1: kd> !analyze -v ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* SYSTEM_SERVICE_EXCEPTION (3b) An exception happened while executing a system service routine. Arguments: Arg1: 00000000c0000005, Exception code that caused the bugcheck Arg2: fffff800033b8873, Address of the instruction which caused the bugcheck Arg3: fffff8800e322dc0, Address of the context record for the exception that caused the bugcheck Arg4: 0000000000000000, zero. Debugging Details: ------------------ EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s. FAULTING_IP: nt!RtlCompareUnicodeStrings+c3 fffff800`033b8873 488b7c2418 mov rdi,qword ptr [rsp+18h] CONTEXT: fffff8800e322dc0 -- (.cxr 0xfffff8800e322dc0) rax=0000000000000041 rbx=fffff8a015a3c1c0 rcx=0000000000000024 rdx=0000000000000003 rsi=fffff8800e3238b0 rdi=0000000000000009 rip=fffff800033b8873 rsp=fffff8800e323798 rbp=000000000000000d r8=fffff8a018cb374c r9=000000200a98fdc4 r10=fffff8800e323988 r11=fffff8800e32398e r12=fffff8a018127c18 r13=fffff8800126e550 r14=0000000000000001 r15=fffffa800abe1570 iopl=0 nv up ei pl nz ac po nc cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010216 nt!RtlCompareUnicodeStrings+0xc3: fffff800`033b8873 488b7c2418 mov rdi,qword ptr [rsp+18h] ss:0018:fffff880`0e3237b0=???????????????? Resetting default scope CUSTOMER_CRASH_COUNT: 1 DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT BUGCHECK_STR: 0x3B PROCESS_NAME: ccSvcHst.exe CURRENT_IRQL: 0 LAST_CONTROL_TRANSFER: from 0000000000000000 to fffff800033b8873 STACK_TEXT: fffff880`0e323798 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!RtlCompareUnicodeStrings+0xc3 FOLLOWUP_IP: nt!RtlCompareUnicodeStrings+c3 fffff800`033b8873 488b7c2418 mov rdi,qword ptr [rsp+18h] SYMBOL_STACK_INDEX: 0 SYMBOL_NAME: nt!RtlCompareUnicodeStrings+c3 FOLLOWUP_NAME: MachineOwner MODULE_NAME: nt IMAGE_NAME: ntkrnlmp.exe DEBUG_FLR_IMAGE_TIMESTAMP: 4c1c44a9 STACK_COMMAND: .cxr 0xfffff8800e322dc0 ; kb FAILURE_BUCKET_ID: X64_0x3B_nt!RtlCompareUnicodeStrings+c3 BUCKET_ID: X64_0x3B_nt!RtlCompareUnicodeStrings+c3 Followup: MachineOwner ---------

    Read the article

  • Implementing Database Settings Using Policy Based Management

    - by Ashish Kumar Mehta
    Introduction Database Administrators have always had a tough time to ensuring that all the SQL Servers administered by them are configured according to the policies and standards of organization. Using SQL Server’s  Policy Based Management feature DBAs can now manage one or more instances of SQL Server 2008 and check for policy compliance issues. In this article we will utilize Policy Based Management (aka Declarative Management Framework or DMF) feature of SQL Server to implement and verify database settings on all production databases. It is best practice to enforce the below settings on each Production database. However, it can be tedious to go through each database and then check whether the below database settings are implemented across databases. In this article I will explain it to you how to utilize the Policy Based Management Feature of SQL Server 2008 to create a policy to verify these settings on all databases and in cases of non-complaince how to bring them back into complaince. Database setting to enforce on each user database : Auto Close and Auto Shrink Properties of database set to False Auto Create Statistics and Auto Update Statistics set to True Compatibility Level of all the user database set as 100 Page Verify set as CHECKSUM Recovery Model of all user database set to Full Restrict Access set as MULTI_USER Configure a Policy to Verify Database Settings 1. Connect to SQL Server 2008 Instance using SQL Server Management Studio 2. In the Object Explorer, Click on Management > Policy Management and you will be able to see Policies, Conditions & Facets as child nodes 3. Right click Policies and then select New Policy…. from the drop down list as shown in the snippet below to open the  Create New Policy Popup window. 4. In the Create New Policy popup window you need to provide the name of the policy as “Implementing and Verify Database Settings for Production Databases” and then click the drop down list under Check Condition. As highlighted in the snippet below click on the New Condition… option to open up the Create New Condition window. 5. In the Create New Condition popup window you need to provide the name of the condition as “Verify and Change Database Settings”. In the Facet drop down list you need to choose the Facet as Database Options as shown in the snippet below. Under Expression you need to select Field value as @AutoClose and then choose Operator value as ‘ = ‘ and finally choose Value as False. Now that you have successfully added the first field you can now go ahead and add rest of the fields as shown in the snippet below. Once you have successfully added all the above shown fields of Database Options Facet, click OK to save the changes and to return to the parent Create New Policy – Implementing and Verify Database Settings for Production Database windows where you will see that the newly created condition “Verify and Change Database Settings” is selected by default. Continues…

    Read the article

< Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >