Search Results

Search found 3024 results on 121 pages for 'growth rate'.

Page 72/121 | < Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >

• Help accessing Beagle over serial with Minicom/GTKTerm

  - by mrgordon

  I am trying to access a brand new Beagle Board from Ubuntu or Mac over serial using the setup seen here: http://specialcomp.com/beagleboard/RevC1.htm I got Minicom and GTKTerm installed on the Ubuntu box. I set up the correct baud rate, turned off flow control, and have tried ttyUSB0 and ttyS0. Once minicom is configured properly, I should just see the init text from the board appear if I have minicom open in terminal while I plug in the board, correct? dmesg shows ttyUSB0 on the computer has been connected to ttyS0 on the beagle.

  Read the article

• Avoid cache overflow in Atempo LiveBackup

  - by Vebjorn Ljosa

  When attempting the initial backup of a new client, Atempo LiveBackup seems to require a very large cache. For instance, a 20 GB cache is not enough to back up a computer that has 100 GB of data. It appears that LiveBackup is adding new files to the cache at a faster rate than it can send them to the server. When the cache fills up, the backup fails. Aside from removing most data from the computer and then add them back gradually after the initial backup, is there a good workaround? Is it possible to make LiveBackup slow down its scan so as to not fill the cache? Or is it possible to place the cache on an external drive?

  Read the article

• Poor quality when trying to stream a 720p video to XBox 360 using Media Center Extender

  - by MBraedley

  I have my XBox 360 set up as a Media Center Extender for my Windows 7 desktop. SD quality avi videos stream fine to my XBox, either though the video library or through Media Center Extender, but when I try a 720p mkv file, the frame rate plummets and the A/V sync is completely lost. I don't want to transcode or switch container formats (mkv isn't supported by the 360), but still want to stream. Both my desktop and 360 are plugged into the same gigabit switch, which is plugged into my ISP supplied modem/router. The video plays fine on my machine in a number of programs. Considering that I should have more than enough bandwidth to accommodate this video, why won't it play back properly?

  Read the article

• Improve performance on Lync desktop sharing

  - by Trikks

  I'm using Lync 2010 server to handle some clients communication and screen sharing. The biggest issue is the performance with screen sharing, it is of rather high quality but the frame rate is very poor. I have been reading and searching a lot on the subject and 95% of all topics is about bandwidth, we have a 200/200 MBit Internet connection solely for this application. Also my test machines runs on an internal gigabit lan. The speeds between all boxes is hysterically fast. Next step was to ensure that there where some profiles for different bandwidths, so i registered some New-CsNetworkBandwidthPolicyProfile -Identity 50Mb_Link -Description "BW profile for 50Mb links" -AudioBWLimit 20000 -AudioBWSessionLimit 200 -VideoBWLimit 14000 -VideoBWSessionLimit 700 New-CsNetworkBandwidthPolicyProfile -Identity 100Mb_Link -Description "BW profile for 100Mb links" -AudioBWLimit 30000 -AudioBWSessionLimit 300 -VideoBWLimit 25000 -VideoBWSessionLimit 1500 Nothing fancy happend here either. Non of the test boxes have anything from Norton installed, they doesn't have any firewalls running (nor does the Lync server), all fences are down in this environment just for the testing. Is there any thing that I may have missed to improve the quality of this? Thanks

  Read the article

• Block IPs if they access a resource

  - by Victor Oliva

  I own a server that it's costantly being attacked by scripts (that try to access to phpMyAdmin's setup file's and stuff like this). I've heard that many people get this kinds of attacks, but I'm starting to worry since they are getting more common (last month I got 2 attacks, and on november 7th there are 3 attempts already (1st, 4th and 6th of nov). I'm not really concerned about it, since I don't have any database. All the info i have on that server is absolutely public, but I'm worried about that attacking-rate increase. So I thought I could -temporarily- block the IPs that come from those attackers, or something that could make my server ignore requests that ask for phpMyAdmin, pma, xamp, etc. Is there something like that? my server is Linux+Apache+Php

  Read the article

• How do I analyze an Apache Bench result?

  - by Alan Hoffmeister

  I need some help with analyzing a log from Apache Bench: Benchmarking texteli.com (be patient) Completed 100 requests Completed 200 requests Completed 300 requests Completed 400 requests Completed 500 requests Completed 600 requests Completed 700 requests Completed 800 requests Completed 900 requests Completed 1000 requests Finished 1000 requests Server Software: Server Hostname: texteli.com Server Port: 80 Document Path: /4f84b59c557eb79321000dfa Document Length: 13400 bytes Concurrency Level: 200 Time taken for tests: 37.030 seconds Complete requests: 1000 Failed requests: 0 Write errors: 0 Total transferred: 13524000 bytes HTML transferred: 13400000 bytes Requests per second: 27.01 [#/sec] (mean) Time per request: 7406.024 [ms] (mean) Time per request: 37.030 [ms] (mean, across all concurrent requests) Transfer rate: 356.66 [Kbytes/sec] received Connection Times (ms) min mean[+/-sd] median max Connect: 27 37 19.5 34 319 Processing: 80 6273 1673.7 6907 8987 Waiting: 47 3436 2085.2 3345 8856 Total: 115 6310 1675.8 6940 9022 Percentage of the requests served within a certain time (ms) 50% 6940 66% 6968 75% 6988 80% 7007 90% 7025 95% 7078 98% 8410 99% 8876 100% 9022 (longest request) What this results can tell me? Isn't 27 rps too slow?

  Read the article

• Dark Windows 7 Screen

  - by user147521

  My Gateway laptop -Windows 7- screen became too dark a few days ago after I finished installing Windows automatic update. I can see nothing unless I use a flashlight. Windows login screen is the only bright screen for few seconds. What should I do to resolve this issue? I checked power-saving/ Power Options settings and rebooting in Safe Mode. I tried to lower the refresh rate but it did not allow me. The laptop adapter type is ATI Radeon Xpress series. I uninstalled and reinstalled the driver. And the driver is up to-date. Any help would be appreciated.

  Read the article

• How do I hookup a dual video card Crossfire rig to a single monitor?

  - by Alexed

  I just received a new Alienware box preinstalled with two nice shiny ATI 6950 graphics cards. My goal is to use both of them to give me really good resolution and frame rate on my single monitor. There's zero documentation with the Alienware box and nothing I can find online. Do I just plug the monitor into one of the cards, and expect the two cards to do magic internally? The ATI Crossfire website indicates a need for an "external crossfirex connection cable". Do I need to buy one of these? If so, what kind of cable is it? The AMD Catalyst Control Center shows the second card as "Linked" but when I go to the AMD Overdrive section, the second card is at zero temperature, and clock, suggesting it's not actually doing anything. What do I need to do to make use of both cards? Is it something that doesn't kick in until I do something graphically intensive?

  Read the article

• Terminal Server 2003 Gaining Time when Windows 7 Client Connects

  - by Matthew

  A Windows 2003 Terminal Server keeps time perfectly until a Windows 7 Home client connects. Then it gains time at a rate of several seconds per minute. The client connects through a firewall with only the RDP port open. The client runs the same apps on the terminal server that XP clients run with no issues. Using the Microsoft Terminal Server Client application copied to the W7 computer from an XPsp3 computer gives the same results. Current workaround is to sync time every 5 minutes. Any better ideas?

  Read the article

• How to change resolution in Ubuntu 10.04, where xvinfo is showing no adapters present?

  - by YumYum

  I am trying to maximize my resolution where I have Resolution: 800x600 (4:3) and Refresh rate: 61Hz I tried the following, but it did not work: $ xvinfo X-Video Extension version 2.2 screen #0 no adaptors present $ cvt 1920 1080 # 1920x1080 59.96 Hz (CVT 2.07M9) hsync: 67.16 kHz; pclk: 173.00 MHz Modeline "1920x1080_60.00" 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync $ xrandr --newmode clever_name 173.00 1920 2048 2248 2576 1080 1083 1088 1120 $ xrandr -q Screen 0: minimum 640 x 480, current 800 x 600, maximum 800 x 600 default connected 800x600+0+0 0mm x 0mm 800x600 61.0* 640x480 60.0 clever_name (0x11d) 173.0MHz h: width 1920 start 2048 end 2248 total 2576 skew 0 clock 67.2KHz v: height 1080 start 1083 end 1088 total 1120 clock 60.0Hz $ xrandr --addmode default clever_name $ xrandr --output default --mode clever_name xrandr: Configure crtc 0 failed

  Read the article

• Keyboard Pressing Application

  - by Click Ok

  Imagine that problem. When you play some games, sometimes happens situations like "press quickly the X key to escape from ropes" or "press quickly the X key to fill the rage gauge", etc. Of course, that kind of game destroy keyboards, joysticks, mouses, etc. I would like to know about programs (preferentially free) that, by example, will press the 'x' key in intervals of, by example, 300ms. Remember that the built in Windows "keyboard repeat rate" doesn't works for games. When you press (and hold) somekey in the game, the key is not repeated as in default Windows Applications. Thanks!

  Read the article

• Does lshw list the "factory" speed of a memory module or the effective speed and how to find the former?

  - by Panayiotis Karabassis

  I hope I phrased this correctly. lshw gives: description: DIMM Synchronous 400 MHz (2.5 ns) product: M378B5773CH0-CH9 vendor: Samsung physical id: 0 slot: DIMM0 size: 2GiB width: 64 bits clock: 400MHz (2.5ns) And indeed the memory speed is set is set to 800MHz in the BIOS, which I think makes sense since it is a double rate. On the other hand, Googling strongly suggests that to this product number corresponds the PC3-10600 type, which is 1333MHz, not 800MHz. And this seems to be confirmed in the BIOS, where if I select Auto for memory bus speed, 1333MHz is selected "based on SPD settings". However in the latter case, the computer does not boot, i.e. the kernel panics, complaining that something attempted to kill the Idle process. So, I am I am beginning to suspect that I have been given defective memory, the technician that installed saw this, and lowered the bus speed. Is this a possibility?

  Read the article

• Microsoft Excel IF/THEN statement for Words

  - by user1667462

  Right now I have an excel spreadsheet. In Cells A1 and down I have cities listed. In Cells B1 and down I have some generic information with the word CITY in it. What I want to know if there is a formula to replace the word CITY that is in the contents of Cell B1 with the contents in Cell A1. For instance... Cell A1 has "Daytona Beach, FL" Cell B1 has "Compare mortgage & refinance rates from different mortgage lenders and brokers in CITY. Find the home refinance rate you were looking for in CITY." I need a formula that replaces "CITY" in B1 with "Dayton Beach, FL" in A1. Is this possible? Thank you for your help!

  Read the article

• Text on Cisco ASA console is garbled/missing letters

  - by Some Linux Nerd

  I've actually looked up a number of solutions for this problem and none of them work. There's this Cisco ASA 5505 that I'd like to use, that outputs mildly garbled text with missing characters. I did some googling and found that the most likely problem is a bad baud rate, so I tried all the baud rates, 7N1, 8N2... basically every possibility minicom had. Then I figured (since I can type ok, just not read) that if I factory reset it that it would fix whatever is set wrong with the terminal. That didn't work either. This usb-db9 adapter and console cable work fine on the catalyst switch in our office. My serial settings are 9600 8N1 with no flow control. Anyone know how to fix this? I have an example of the text on pastebin: http://pastebin.com/MAJF0mVU - it's just lots of "Dfaut cnfiuraionfil cotais 1enty." instead of "Default configuration blah blah"

  Read the article

• Log with iptalbes which user is delivering email to port 25

  - by Maus

  Because we got blacklisted on CBL I set up the following firewall rules with iptables: #!/bin/bash iptables -A OUTPUT -d 127.0.0.1 -p tcp -m tcp --dport 25 -j ACCEPT iptables -A OUTPUT -p tcp -m tcp --dport 25 -m owner --gid-owner mail -j ACCEPT iptables -A OUTPUT -p tcp -m tcp --dport 25 -m owner --uid-owner root -j ACCEPT iptables -A OUTPUT -p tcp -m tcp --dport 25 -m owner --uid-owner Debian-exim -j ACCEPT iptables -A OUTPUT -p tcp -m limit --limit 15/minute -m tcp --dport 25 -j LOG --log-prefix "LOCAL_DROPPED_SPAM" iptables -A OUTPUT -p tcp -m tcp --dport 25 -j REJECT --reject-with icmp-port-unreachable I'm not able to connect to port 25 from localhost with another user than root or a mail group member - So it seems to work. Still some questions remain: How effective do you rate this rule-set to prevent spam coming from bad PHP-Scripts hosted on the server? Is there a way to block port 25 and 587 within the same statement? Is the usage of /usr/sbin/sendmail also limited or blocked by this rule-set? Is there a way to log the username of all other attempts which try to deliver stuff to port 25?

  Read the article

• controlling the bandwidth using tc

  - by Supratik

  Hi I have two NIC etho is connected to the internet and eth1 is connected to the LAN. I want to restrict the download limit using iptables and linux tc. So I wrote a test script to verify if it is working. My iptables configuration is as below. iptables -t mangle -N INBOUND iptables -t mangle -I PREROUTING -i eth0 -j INBOUND iptables -t mangle -A INBOUND -j MARK --set-mark 60 My ingress configuration is as below. tc qdisc add dev eth0 handle 1: ingress tc filter add dev eth0 parent 1: protocol ip prio 1 handle 60 fw police rate 100kbit burst 20kbit drop flowid :1 Can you please tell me what I am missing here ?

  Read the article

• Per process I/O accounting on AIX

  - by ipozgaj

  Is there a way of getting per process I/O statistics on AIX, i.e. to get current disk I/O rate of a process? Commands like iostat, nmon, topas etc. can't display such data. Filemon also doesn't help. Actually, what I would need is something much like iotop(1) command on Linux. Update: it seems there is no builtin command(s) to do this. I will most probably make my own by using the SPMI API.

  Read the article

• Installation fails after period of time

  - by Jack Marchetti

  I'm running Windows 7 64 bit, Ultimate. I'm running into a problem where, if my computer is on long enough, I am unable to install any software. For example, if I reboot and try to install something, for the most part, it will succeed. if I try and install something after a few hours/days, it will always fail. Sometimes stating that "a previous install failed..." or "an install is already taking place..." even though there is nothing being installed. This also seems to be making my Windows updates fail at a pretty regular rate. Any ideas?

  Read the article

• Second Monitor "Input Not Supported"

  - by Drew

  I have two identical monitors (new Acer s211hl) with a native resolution of 1920x1080. When enabling dual monitor support in Windows 7, the primary monitor works as expected, but the second monitor says, "Input not Supported" and fails to display anything. If I change the resolution of the second monitor to 1440x900, it works as expected. Likewise, if I set it to 1920x1080 with a refresh rate of 30hz, the monitor displays video. However, neither of these are solutions, because the output looks very blurry, and the content is stretched. I am using the following hardware: Monitors: Acer s211hl Motherboard: Asus F1A75M-Pro CPU/GPU: AMD A8-3850 with integrated Radeon HD 6550D graphics I suspect that there is probably an issue with the integrated graphics or motherboard not being able to output to two 1920x1080 monitors, but I am hoping for official confirmation.

  Read the article

• Database for heat tolerances of various cables?

  - by I. F.

  Is there any kind of unified database of heat tolerances for networking cables? I've been setting up a number of home/small office networks lately and as a mostly-amateur I could really use some information on what is safe to run behind a radiator, next to a steam pipe, etc. The question I'm up against at the moment is: Can I run normal RJ11 phone line cable (from DSL modem to phone jack) behind a steam radiator without risking a fire? Unlike cat5, I could not find published standards for these, so I'm turning to experts with more experience. This is a cut-rate show. Do I go out and buy more cabling, and if so which, or use the spare that I have?

  Read the article

• MacBook Pro USB port provides more current in Mac OS X than in Windows

  - by AngryHacker

  I have a MacBook Pro with both Mac OS X Lion and Windows (under BootCamp) installed. While in Windows, I tried to charge my iPad 3 via the USB port. The iPad says "Not charging", but really, it does, just super slow (4-5% per hour). The reason for this is that the iPad requires 2.1 A of current, but a standard USB port provides 0.5 A. However, if I switch to Mac OS X, the iPad states that it is charging and it does at a rate of about 10% per hour. The only takeaway from this is that either OS X puts out more current on the USB port or that it recognizes the iPad and acts accordingly. Can someone provide more information on what is actually happening?

  Read the article

• Can expire_logs_days be less than 1 day in MySQL?

  - by Scott

  So... yesterday I received an "after the fact email" about a campaign that has started for one of the services that I run. Now the DB server is getting hammered, hard, to the tune of about 300mb/min in binary logging for the replicate. As you could imagine, this is chewing up space at a fairly tremendous rate. My normal 7 day expiry of binary logs just isn't cutting it. I've resorted to truncating logs to just the last for 4 hours with(I'm verifying that replication is up to date with mk-heartbeat): PURGE MASTER LOGS BEFORE DATE_SUB( NOW(), INTERVAL 4 HOUR); I'm just running that from cron every few hours to weather the storm, but it made me question the minimum value for expire_logs_days. I haven't come across a value that is less than 1, but that doesn't mean that it isn't possible. http://dev.mysql.com/doc/refman/5.0/en/server-system-variables.html#sysvar_expire_logs_days gives the type as being numeric, but doesn't indicate if it's expecting integers.

  Read the article

• How to know my wireless card has injection enabled?

  - by shrimpy

  I am playing around with aircrack. And was trying to see whether my wireless card on my laptop can pass the injection test And I end up seeing the following... does it mean my wireless card is not able to run aircrack? root@myubuntu:/home/myubuntu# iwconfig lo no wireless extensions. eth0 no wireless extensions. eth1 IEEE 802.11bg ESSID:"" Nickname:"" Mode:Managed Frequency:2.437 GHz Access Point: Not-Associated Bit Rate:54 Mb/s Tx-Power:24 dBm Retry min limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=5/5 Signal level=0 dBm Noise level=-57 dBm Rx invalid nwid:0 Rx invalid crypt:781 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 root@myubuntu:/home/myubuntu# aireplay-ng -9 eth1 ioctl(SIOCSIWMODE) failed: Invalid argument ARP linktype is set to 1 (Ethernet) - expected ARPHRD_IEEE80211, ARPHRD_IEEE80211_FULL or ARPHRD_IEEE80211_PRISM instead. Make sure RFMON is enabled: run 'airmon-ng start eth1 <#>' Sysfs injection support was not found either. root@myubuntu:/home/myubuntu#

  Read the article

• ffmpeg error while segmenting

  - by Tommy Ng

  I'm using ffmpeg and segmenter on Ubuntu 10.04 to create the transport stream from flv/h264 video files and then segment the ts segments for ipad streaming. Some ts files show an error with segmenter - Output #0, mpegts, to '29': Stream #0.0: Video: 0x0000, yuv420p, 480x360, q=2-31, 90k tbn, 25 tbc Stream #0.1: Audio: 0x0000, 0 channels, s16 [mpegts @ 0x11f4ac0]sample rate not set Could not write mpegts header to first output file my ffmpeg command for creating the ts file - ffmpeg -i 1.flv -f mpegts -acodec libfaac -ar 48000 -ab 64k -s 480x360 -vcodec libx264 -b 192k -flags +loop -cmp +chroma -partitions +parti4x4+partp8x8+partb8x8 -subq 5 -trellis 1 -refs 1 -coder 0 -me_range 16 -keyint_min 25 -sc_threshold 40 -i_qfactor 0.71 -bt 200k -maxrate 192k -bufsize 192k -rc_eq 'blurCplx^(1-qComp)' -qcomp 0.6 -qmin 10 -qmax 51 -qdiff 4 -level 30 -aspect 480:360 -g 30 -async 2 -y 1.ts my segmenter command - segmenter 1.ts 10 1 1.m3u8 path/to/streams/

  Read the article

• linux: upload / download difference on network shares

  - by Batsu

  I have a Red Hat Enterprise Linux 6 (with SELinux) which shows significant differences of speed between download and upload (the latter significantly slower) of files shared over the LAN. The bottleneck seems to be the output of the linux machine since I have a rate around 1Mb/s when WinXP machines download files shared (using samba) by the RHEL machine uploading files from the RHEL to a WinXP's shared folder while uploading from the XP machines to linux's shares downloading XPs' shares on the RHEL any share between Windows machines only run smooth (around 50Mb/s). Since the upload from RHEL to WinXP's share is slowed too I would exclude an issue in the configuration of samba. What could possibly determine this limit in the upload speed? update: iptables doesn't show any output rule and disabling it doesn't show any noticeable difference, so I would rule out it too.

  Read the article

< Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >