Search Results

Search found 3024 results on 121 pages for 'growth rate'.

Page 76/121 | < Previous Page | 72 73 74 75 76 77 78 79 80 81 82 83  | Next Page >

• Why Wifi no longer works 12.04.1

  - by Roger

  starting this morning over wifi (Realtek RTL8188CE) on CLEVO W253HU. May be due to the update before yesterday, more pilot managed, but somehow it worked yesterday. If someone has an idea of the problem. Back command lines: cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04.1 LTS" lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 006: ID 192f:0416 Avago Technologies, Pte. Bus 002 Device 004: ID 5986:0315 Acer, Inc lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01) 03:00.0 Ethernet controller: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 05) 03:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 90) 03:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 90) 03:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 90) lspci -nn | grep -i net 02:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter [10ec:8176] (rev 01) 03:00.0 Ethernet controller [0200]: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller [197b:0250] (rev 05) lspci -k 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: i915 Kernel modules: i915 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: mei Kernel modules: mei 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: ehci_hcd 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel modules: iTCO_wdt 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: ahci 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel modules: i2c-i801 02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01) Subsystem: Realtek Semiconductor Co., Ltd. Device 9196 Kernel modules: rtl8192ce 03:00.0 Ethernet controller: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: jme Kernel modules: jme 03:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 90) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: sdhci-pci Kernel modules: sdhci-pci 03:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 90) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel modules: sdhci-pci 03:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 90) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: jmb38x_ms Kernel modules: jmb38x_ms sudo lshw -C network *-network NON-RÉCLAMÉ description: Network controller produit: RTL8188CE 802.11b/g/n WiFi Adapter fabriquant: Realtek Semiconductor Co., Ltd. identifiant matériel: 0 information bus: pci@0000:02:00.0 version: 01 bits: 64 bits horloge: 33MHz fonctionnalités: pm msi pciexpress cap_list configuration: latency=0 ressources: portE/S:e000(taille=256) mémoire:f7d00000-f7d03fff *-network description: Ethernet interface produit: JMC250 PCI Express Gigabit Ethernet Controller fabriquant: JMicron Technology Corp. identifiant matériel: 0 information bus: pci@0000:03:00.0 nom logique: eth0 version: 05 numéro de série: 00:90:f5:c1:c6:45 taille: 100Mbit/s capacité: 1Gbit/s bits: 32 bits horloge: 33MHz fonctionnalités: pm pciexpress msix msi bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=jme driverversion=1.0.8 duplex=full ip=192.168.1.54 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s ressources: irq:44 mémoire:f7c20000-f7c23fff portE/S:d100(taille=128) portE/S:d000(taille=256) mémoire:f7c10000-f7c1ffff mémoire:f7c00000-f7c0ffff lsmod Module Size Used by btusb 18288 0 rfcomm 47604 0 bnep 18281 2 bluetooth 180104 11 btusb,rfcomm,bnep parport_pc 32866 0 ppdev 17113 0 binfmt_misc 17540 1 snd_hda_codec_realtek 224173 0 dm_crypt 23125 0 snd_hda_codec_hdmi 32474 0 uvcvideo 72627 0 videodev 98259 1 uvcvideo v4l2_compat_ioctl32 17128 1 videodev snd_hda_intel 33773 2 snd_hda_codec 127706 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi jmb38x_ms 17646 0 psmouse 87692 0 serio_raw 13211 0 memstick 16569 1 jmb38x_ms snd_seq_midi_event 14899 1 snd_seq_midi rtl8192ce 84826 0 rtl8192c_common 75767 1 rtl8192ce rtlwifi 111202 1 rtl8192ce snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq mac80211 506816 3 rtl8192ce,rtl8192c_common,rtlwifi mac_hid 13253 0 snd 78855 14 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device cfg80211 205544 2 rtlwifi,mac80211 soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm mei 41616 0 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp usbhid 47199 0 hid 99559 1 usbhid i915 473035 3 drm_kms_helper 46978 1 i915 drm 242038 4 i915,drm_kms_helper jme 41259 0 i2c_algo_bit 13423 1 i915 sdhci_pci 18826 0 sdhci 33205 1 sdhci_pci wmi 19256 0 video 19596 1 i915 iwconfig lo no wireless extensions. eth0 no wireless extensions. ifconfig eth0 Link encap:Ethernet HWaddr 00:90:f5:c1:c6:45 inet adr:192.168.1.54 Bcast:192.168.1.255 Masque:255.255.255.0 adr inet6: fe80::290:f5ff:fec1:c645/64 Scope:Lien UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Packets reçus:4513 erreurs:0 :0 overruns:0 frame:0 TX packets:4359 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:1000 Octets reçus:3471675 (3.4 MB) Octets transmis:712722 (712.7 KB) Interruption:44 lo Link encap:Boucle locale inet adr:127.0.0.1 Masque:255.0.0.0 adr inet6: ::1/128 Scope:Hôte UP LOOPBACK RUNNING MTU:16436 Metric:1 Packets reçus:686 erreurs:0 :0 overruns:0 frame:0 TX packets:686 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:0 Octets reçus:64556 (64.5 KB) Octets transmis:64556 (64.5 KB) sudo iwlist scan lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. uname -r -m 3.2.0-30-generic x86_64 cat /etc/network/interfaces auto lo iface lo inet loopback nm-tool NetworkManager Tool State: connected (global) - Device: eth0 [Connexion filaire 1] ------------------------------------------ Type: Wired Driver: jme State: connected Default: yes HW Address: 00:90:F5:C1:C6:45 Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: on IPv4 Settings: Address: 192.168.1.54 Prefix: 24 (255.255.255.0) Gateway: 192.168.1.1 DNS: 192.168.1.1 sudo rfkill listrfkill list 1: hci0: Bluetooth Soft blocked: no Hard blocked: no The absence of line "Kernel driver in use:" the return of lspci-k made ??me think that it is not loaded yet but he seems to be. lsmod | grep rtl8192ce rtl8192ce 137478 0 rtlwifi 118749 1 rtl8192ce mac80211 506816 2 rtl8192ce,rtlwifi I found something disturbing in / var / log / syslog Sep 14 11:40:11 pcroger kernel: [ 64.048783] rtl8192ce-0:rtl92c_init_sw_vars():<0-0> Failed to request firmware! Sep 14 11:40:11 pcroger kernel: [ 64.048795] rtlwifi-0:rtl_pci_probe():<0-0> Can't init_sw_vars. Sep 14 11:40:11 pcroger kernel: [ 64.048835] rtl8192ce 0000:02:00.0: PCI INT A disabled Sep 14 11:40:11 pcroger kernel: [ 64.943345] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6 frozen Sep 14 11:40:11 pcroger kernel: [ 64.943358] ata1.00: failed command: READ FPDMA QUEUED Sep 14 11:40:11 pcroger kernel: [ 64.943371] ata1.00: cmd 60/00:00:00:68:6a/04:00:0b:00:00/40 tag 0 ncq 524288 in Sep 14 11:40:11 pcroger kernel: [ 64.943374] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) Sep 14 11:40:11 pcroger kernel: [ 64.943381] ata1.00: status: { DRDY } Ubuntu and takes forever to start (2 min).

  Read the article

• Is there a name for a testing method where you compare a set of very different designs?

  - by DVK

  "A/B testing" is defined as "a method of marketing testing by which a baseline control sample is compared to a variety of single-variable test samples in order to improve response rates". The point here, of course, is to know which small single-variable changes are more optimal, with the goal of finding the local optimum. However, one can also envision a somewhat related but different scenario for testing the response rate of major re-designs: take a baseline control design, take one or more completely different designs, and run test samples on those redesigns to compare response rates. As a practical but contrived example, imagine testing a set of designs for the same website, one being minimalist "googly" design, one being cluttered "Amazony" design, and one being an artsy "designy" design (e.g. maximum use of design elements unlike Google but minimal simultaneously presented information, like Google but unlike Amazon) Is there an official name for such testing? It's definitely not A/B testing, since the main component of it (finding local optimum by testing single-variable small changes that can be attributed to response shift) is not present. This is more about trying to compare a set of local optimums, and compare to see which one works better as a global optimum. It's not a multivriable, A/B/N or any other such testing since you don't really have specific variables that can be attributed, just different designs.

  Read the article

• Jumpstart Fusion Middleware projects with Oracle User Productivity Kit

  - by Dain C. Hansen

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Missed our webinar on how Oracle UPK can reduce your project timeline by more than 10%?  View the playback and discover how to successfully build, deploy, and manage custom applications built with Fusion Middleware using Oracle User Productivity Kit!  Oracle UPK develops standards, processes, and designs the right solution for Oracle SOA Suite, WebCenter, Web 2.0, and Business Process Management tool users. By using Oracle UPK organizations can reduce implementation costs, increase user adoption, and shorten time to deployment of custom applications built with Fusion Middleware.  View this webcast and learn how Oracle UPK: Reduces standardization effort costs by 75% Drives standardization and adoption of ITIL processes Brings products to market faster with rapid custom application development Increases user adoption and productivity rate  For more information on Oracle UPK, visit the resource center. 

  Read the article

• SQL Azure Security: DoS

  - by Herve Roggero

  Since I decided to understand in more depth how SQL Azure works I started to dig into its performance characteristics. So I decided to write an application that allows me to put SQL Azure to the test and compare results with a local SQL Server database. One of the options I added is the ability to issue the same command on multiple threads to get certain performance metrics. That's when I stumbled on an interesting security feature of SQL Azure: its Denial of Service (DoS) detection engine. What this security feature does is that it performs a check on the number of connections being established, and if the rate of connection is too high, SQL Azure blocks all communication from that machine. I am still trying to learn more about this specific feature, but it appears that going to the SQL Azure portal and testing the connection from the portal "resets" the feature and you are allowed to connect again... until you reach the login threashold. In the specific test I was performing, all the logins were successful. I haven't tried to login with an invalid account or password... that will be for next time. On my Linked In group (SQL Server and SQL Azure Security: http://www.linkedin.com/groups?gid=2569994&trk=hb_side_g) Chip Andrews (www.sqlsecurity.com) pointed out that this feature in itself could present an internal threat. In theory, a rogue application could be issuing many login requests from a NATed network, which could potentially prevent any production system from connecting to SQL Azure within the same network. My initial response was that this could indeed be the case. However, while the TCP protocol contains the latest NATed IP address of a machine (which masks the origin of the machine making the SQL request), the TDS protocol itself contains the IP Address of the machine making the initial request; so technically there would be a way for SQL Azure to block only the internal IP address making the rogue requests.  So this warrants further investigation... stay tuned...

  Read the article

• Graphics performance of 945GME

  - by l0b0

  Edit: Since setting Appearance - Visual Effects up to a stunning "Normal", I now get ~35 FPS in glxgears right after login, with nothing else running :( I'm getting terrible graphics performance in NeverWinter Nights (native with SoU+HotU+CEP2) on my Eee PC 1005HAB. Even with all graphics settings (including the "advanced" ones) at minimum I get about 2-10 FPS, depending on the scene. Firefox is really sluggish as well - Changing tabs often takes a second, scrolling is laggy, and typing this I notice the delay between pressing keys and seeing the text on screen. The rest of the OS is running OK, although general performance seems to be even worse than my old Eee PC 900. glxgears gives about 60 FPS, which is apparently as it should be (synchronized with the monitor refresh rate). Bugs like Launchpad #252094 and the instructions for Reverting the Jaunty Xorg intel driver to 2.4 are old enough that I'm afraid following the instructions would render the system unusable. Are there any tips for improving graphics performance on this system that are still relevant for 10.10? $ uname -a Linux l0b0eee 2.6.35-28-generic #49-Ubuntu SMP Tue Mar 1 14:40:58 UTC 2011 i686 GNU/Linux $ lspci -nn | grep VGA 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GME Express Integrated Graphics Controller [8086:27ae] (rev 03) $ glxinfo name of display: :0.0 display: :0 screen: 0 direct rendering: Yes server glx vendor string: SGI server glx version string: 1.4 ...

  Read the article

• Input handling between game loops

  - by user48023

  This may be obvious and trivial for you but as I am a newbie in programming I come with a specific question. I have three loops in my game engine which are input-loop, update-loop and render-loop. Update-loop is set to 10 ticks per second with a fixed timestep, render-loop is capped at around 60 fps and the input-loop runs as fast as possible. I am using one of the Javascript frameworks which provide such things but it doesn't really matter. Let's say I am rendering a tile map and the view of which elements are rendered depends on camera-like movement variables which are modified during key pressing. This is only about camera/viewport and rendering, no game physics involved here. And now, how can I handle input events among these loops to keep consistent engine reaction? Am I supposed to read the current variable modified with input and do some needed calculations in a update-loop and share the result so it could be interpolated in a render-loop? Or read the input effect directly inside the render-loop and put needed calculations inside? I thought interpreting user input inside an update-loop with a low tick rate would be inaccurate and kind of unresponsive while rendering with interpolation in the final view. How it is done properly in games overall?

  Read the article

• Why does SEO based code tips not appear to affect ranking?

  - by Ben

  I've been researching various methods for SEO where pages have precise titles, keywords are highlighted with h tags and tick the many boxes stated in good page mark up for SEO. However when looking at some top ranked search sites on google for key terms they have terrible SEO based mark up. Really long page titles, no tags, limited appearance of keywords in the text and so on. SEO analysis services rate them lower than other sites, yet these sites rank really high. Even with a low number of back-links they are high, so I don't understand how these sites earn the position when they appear inferior to those below them which have better mark up and links. I don't want to cause trouble my mentioning sites or keywords etc. but looking in google at 'executive search' the roughly 5th placed site makes no sense why it should be highly rank, especially with all the added .swfs. The same applies for the top of 'Japan Executive Search'. My main point is that these sites seem to not have all the important structural rules stated in seo page rating applications and general suggested best practice, nor do they show large back-links. It makes me feel like there is no point bothering to write decent mark up if it really doesn't matter. Can anyone explain how sites with such mark-up, and low back-links can outrank well written and structured sites with greater linkage? Sorry if this is a fuzzy question, I want to avoid singling out any sites for example, but it really has me perplexed that sites which appear to ignore the suggested best practices rank so well.

  Read the article

• Stencyl or flash limitation?

  - by FlightOfGrey

  I have found that Stencyl doesn't seem to be very good at handling very many actors in a game. I had been trying to implement some basic AI at the moment all the behaviours were: wander (pick a random point and move directly to it) and wrap around screen (if it goes off the top of the screen it appears at the bottom). Even with these simple behaviours and calculations the frame rate dropped dramatically when there were more then 50 actors on screen: 10 actors: 60fps 50 actors: 30-50fps 75 actors: ~30fps 100 actors: 15-20fps 200 actors: 8-10fps I had planned on having a maximum of around 200 actors but I see that's no longer an option and implementing a more complicated AI system with flocking behaviour, looking at creating a game in a similar vein to flOw. I understand that a game is perfectly playable at 30fps but this is a super simple test with ultra simple graphics, no animations and no sounds is child's play in terms of calculations to be made. Is this a limitation with Stencyl or is it flash? Should I simply scale the scope of the game down or is there a better game engine that exports to .swf that I should look into?

  Read the article

• A Trip to the Moon (Le Voyage dans la Lune) [Super Retro Classic Sci-Fi Video]

  - by Asian Angel

  If you are into retro sci-fi movies, then you will definitely want to have a look at this French classic from 1902. This silent movie is only 10.5 minutes long, but is well worth watching and makes for a fun romp through the early days of sci-fi. From YouTube: A Trip to the Moon (French: Le Voyage dans la lune) is a 1902 French black and white silent science fiction film. It is loosely based on two popular novels of the time: From the Earth to the Moon by Jules Verne and The First Men in the Moon by H. G. Wells. The film was written and directed by Georges Melies, assisted by his brother Gaston. The film runs 14 minutes if projected at 16 frames per second, which was the standard frame rate at the time the film was produced. It was extremely popular at the time of its release and is the best-known of the hundreds of fantasy films made by Melies. A Trip to the Moon is the first science fiction film, and utilizes innovative animation and special effects, including the iconic shot of the rocketship landing in the Moon’s eye. A Trip to the Moon / Le Voyage dans la lune – 1902 [via 20 best designs in sci-fi movies - Page 3 (Creative Bloq)] How to Use an Xbox 360 Controller On Your Windows PC Download the Official How-To Geek Trivia App for Windows 8 How to Banish Duplicate Photos with VisiPic

  Read the article

• Brand new battery is 100% charged but at 0% capacity

  - by Chris Conway

  I just bought a brand new battery to replace one that had seemingly died. I followed the instructions that came with the battery and charged it overnight, then ran my computer on battery until it was in a critical state and charged it overnight again. Now the battery appears to be 100% charged and at the same time at 0% capacity—when it's plugged in it doesn't charge and when it's unplugged the computer immediately goes into low power mode. I've taken the battery out and checked the contacts. I've rebooted the system with and without the battery. Nothing seems to help. I'm not sure if I should blame the battery, the laptop, the charger, or the power management software for this state of affairs. The obvious answer would be the battery but I bought this battery because another year-old battery exhibited similar behavior—I assumed it was dead and a Dell tech came to the same conclusion. I'm loathe to order another new battery without first exploring other explanations. What can I do to diagnose this problem? Here's the /proc info: $ cat /proc/acpi/battery/BAT0/state present: yes capacity state: critical charging state: charged present rate: 1 mA remaining capacity: 0 mAh present voltage: 9754 mV $ cat /proc/acpi/battery/BAT0/info present: yes design capacity: 6600 mAh last full capacity: 6789 mAh battery technology: rechargeable design voltage: 11100 mV design capacity warning: 660 mAh design capacity low: 200 mAh cycle count: 0 capacity granularity 1: 66 mAh capacity granularity 2: 66 mAh model number: DELL WK serial number: 4043 battery type: LION OEM info: SMP

  Read the article

• 5 Design Tricks Facebook Uses To Affect Your Privacy Decisions

  - by Jason Fitzpatrick

  If you feel like Facebook increasingly has fewer and fewer options to reject applications and organization access to your private information, you’re not imagining it. Here are five ways Facebook’s design choices in the App Center have minimized your choices over time. Over at TechCrunch they have a guest post by Avi Charkham highlighting five ways recent changes to the Facebook App Center put privacy settings on the back burner. In regard to the comparison seen in the image above, for example, he writes: #1: The Single Button Trick In the old design Facebook used two buttons – “Allow” and “Don’t Allow” – which automatically led you to make a decision. In the new App Center Facebook chose to use a single button. No confirmation, no decisions to make. One click and, boom, your done! Your information was passed on to the app developers and you never even notice it. Hit up the link below to check out the other four redesign choices that minimize the information about privacy and data usage you see and maximize the click-through and acceptance rate for apps. How To Switch Webmail Providers Without Losing All Your Email How To Force Windows Applications to Use a Specific CPU HTG Explains: Is UPnP a Security Risk?

  Read the article

• Suitability of ground fog using layered alpha quads?

  - by Nick Wiggill

  A layered approach would use a series of massive alpha-textured quads arranged parallel to the ground, intersecting all intervening terrain geometry, to provide the illusion of ground fog quite effectively from high up, looking down, and somewhat less effectively when inside the fog and looking toward the horizon (see image below). Alternatively, a shader-heavy approach would instead calculate density as function of view distance into the ground fog substrate, and output the fragment value based on that. Without having to performance-test each approach myself, I would like first to hear others' experiences (not speculation!) on what sort of performance impact the layered alpha texture approach is likely to have. I ask specifically due to the oft-cited impacts of overdraw (not sure how fill-rate bound your average desktop system is). A list of games using this approach, particularly older games, would be immensely useful: if this was viable on pre DX9/OpenGL2 hardware, it is likely to work fine for me. One big question is in regards to this sort of effect: (Image credit goes to Lume of lume.com) Notice how the vertical fog gradation is continuous / smooth. OTOH, using textured quad layers, I can only assume that layers would be mighty obvious when walking through them -- the more sparse they were, the more obvious this would be. This is in contrast to where fog planes are aligned to face the player every frame, where this coarseness would be much less obvious.

  Read the article

• Handling SEO for Infinite pages that cause external slow API calls

  - by Noam

  I have an 'infinite' amount of pages in my site which rely on an external API. Generating each page takes time (1 minute). Links in the site point to such pages, and when a users clicks them they are generated and he waits. Considering I cannot pre-create them all, I am trying to figure out the best SEO approach to handle these pages. Options: Create really simple pages for the web spiders and only real users will fetch the data and generate the page. A little bit 'afraid' google will see this as low quality content, which might also feel duplicated. Put them under a directory in my site (e.g. /non-generated/) and put a disallow in robots.txt. Problem here is I don't want users to have to deal with a different URL when wanting to share this page or make sense of it. Thought about maybe redirecting real users from this URL back to the regular hierarchy and that way 'fooling' google not to get to them. Again not sure he will like me for that. Letting him crawl these pages. Main problem is I can't control to rate of the API calls and also my site seems slower than it should from a spider's perspective (if he only crawled the generated pages, he'd think it's much faster). Which approach would you suggest?

  Read the article

• DriveSafe.ly Reads Your Text Messages Aloud

  - by ETC

  DriveSafe.ly, a free application for Android and BlackBerry phones, reads your text messages, emails, and caller ID notifications aloud so you can stay connected while keeping your eyes on the road. DriveSafe.ly is a feature packed application that reads your text messages, your emails, and the ID from your caller ID aloud. It’s not the only SMS-to-speech application out there but it sports the most featured including rocking a customizable auto-responder (so you can let people know you heard their message and will respond as soon as you’re off the road), the ability to customize the voice and the read-rate, how much information if given (the senders name or just the message or the senders name, subject, and message in the case of emails), and more. Upgrading to the $13.95 a year premium version allows voice-to-txt translation so you can respond verbally to your text messages and emails. Hit up the link below to read more and grab a copy for your Android or BlackBerry phone. DriveSafe.ly [via Addictive Tips] Latest Features How-To Geek ETC Have You Ever Wondered How Your Operating System Got Its Name? Should You Delete Windows 7 Service Pack Backup Files to Save Space? What Can Super Mario Teach Us About Graphics Technology? Windows 7 Service Pack 1 is Released: But Should You Install It? How To Make Hundreds of Complex Photo Edits in Seconds With Photoshop Actions How to Enable User-Specific Wireless Networks in Windows 7 DriveSafe.ly Reads Your Text Messages Aloud The Likability of Angry Birds [Infographic] Dim an Overly Bright Alarm Clock with a Binder Divider Preliminary List of Keyboard Shortcuts for Unity Now Available Bring a Touch of the Wild West to Your Desktop with the Rango Theme for Windows 7 Manage Your Favorite Social Accounts in Chrome and Iron with Seesmic

  Read the article

• How can I make video games if I don't like programming?

  - by hoper

  I am studying C++ code in my school (my major is computer programming). Honestly, my grades are not so good, and assignments are really hard. Sometimes I feel sad that I will spend 8-10 hours per day coding (which is stressful) in the future for my job. But I still want to make video games. Maybe this is the only reason why I am taking all of these stressful courses. I always write down plots, stories, characters, fictional gaming worlds... Once, I thought I should study artistic technology such as game design and not computer technology such as C++, C#, etc. However, most of popular game designers (or directors) such as Kojima, Miyamoto, etc. used to be good programmers. Companies actaully assign programmers to directors because they understand how to make a game. I've try to find other colleges or universities where they teach game design programs. However, one article that lists rank 10 game design schools in North America seems untrustful because the survey company only scores it from intervews of students. Once, I tried to attend Art Institute of Vancouver which is rank 7 according to that article. However, one programmer who used to be an instructor in there told me the truth: the employement rate of graduated students is low. How can I have a future making games if I don't like programming?

  Read the article

• Are there opportunities working as full-time paid programmer for Non-profit organizations

  - by Rick

  Some recent events in my life have made me want to contribute more to causes I believe in rather than just working for a profit-driven company. I have been thinking that if I could find a non-profit organization that I like and believe in then I might feel more fulfilled working for them. I have a decent amount of web development experience and currently work as a Java / Spring web developer. I realize the compensation wouldn't have the same "ceiling" potential as for-profit but am wondering if its possible to get at least something close to a market rate for work as I am planning to start a family sometime soon and still need a legitimate income. If anyone has any knowledge or experience about this sort of thing would be happy to hear from you. EDIT: Without getting in to too much personal detail, I have a relative who recently passed away who suffered from a mental illness so while it doesn't have to be an organization specifically dedicated to this, I am hoping to work for something along these lines at least where there is more of a social cause rather than just working on an open-source project whose only cause is the advancement of technology.

  Read the article

• New Study Guide: "Oracle Solaris 11 System Administration"

  - by Harold Green

  A new helpful resource for Solaris 11 exam preparation has just been released. "Oracle Solaris 11 System Administration" by author and educator Bill Calkins covers effective installation and administration of an Oracle Solaris 11 system. In addition to being a valuable, comprehensive study guide, the book also serves as a complete reference guide for the everyday tasks of an Oracle Solaris System Administrator. This book can be a valuable addition to your preparation for the Oracle Solaris 11 Advanced System Administration (1Z1-822) certification exam. This exam, combined with the Oracle Certified Associate, Oracle Solaris 11 System Administrator (OCA) certification and a training requirement will earn you the Oracle Certified Professional, Oracle Solaris 11 System Administrator (OCP) certification. This valuable credential is designed for Oracle Solaris System Administrators with a strong foundation in the Oracle Solaris 11 Operating System as well as a fundamental understanding of the UNIX operating system, commands and utilities. This certification covers topics on core elements such as: configuring network interfaces, managing swap configurations, crash dumps, and core files. The 822 exam is currently in beta at the greatly discounted rate of $50 USD, but the beta period will soon be closing (likely the end of this month/June 2013), so be take advantage of the opportunity to be one of the first to hold this new certification.  Bill Calkins also recently posted some tips for taking Oracle Solaris 11 certification exams.

  Read the article

• CRM Evolution 2014: Mediocrity is the New Horrible in Customer Service

  - by Tuula Fai

  "Mediocrity is the new horrible in customer service," Blair McHaney, Gold's Gym Almost everyone knows that customers' expectations have risen. But, after listening to two days of presentations at CRM Evolution, I think it’s more accurate to say that customers' expectations have skyrocketed. Fortunately, most companies have gotten the message and are taking their customer service to a higher level. For those who've been hesitant to 'boldly go where their customer service organization has not gone before,' take heart. I’ve got some statistics that will encourage you to take those first few steps. Why should I change? By engaging customers online, ancestry.com achieved a 99.5% customer satisfaction score (CSAT) while improving retention and saving millions on greater efficiency, including a 38%-50% drop in inbound calls and emails.1 By empowering employees to delight customers, Gold’s Gym achieved a 77.5% Net Promoter Score (NPS) and 22% customer churn rate. No small feat when you consider the industry averages are 40% NPS and 45% churn.2 By adapting quickly to social media, brands like Verizon have benefited from social community members spending 2.5x-10x more than average customers.3 ‘The fierce urgency of now’ is upon us in customer service. You can take your customer service to a higher level! To find out more, click here CRM Evolution Customer Service Experience Footnotes: 1. Arvindh Balakrishnan, Is Your Customer Service Modern?2. Blair McHaney, Wire Your Organization with Customer Feedback3. Becky Carroll, The Power of Communities for Improving the Service Experience and Building Advocates

  Read the article

• How to setup a Wireless Access-Point using my laptop's WiFi card?

  - by Abdul Karim Memon

  want to share my Laptops (running Ubuntu 10.10) Broadband with my Android (Galaxy Mini) running 2.2.1. Since Androids currently do not support ad-hoc networks so the "Create new wireless network.." won't help. Q1) How do i setup a Wireless Access Point using my Laptops WiFi card? Q2) What is the difference between an "ad-hoc" network and an "access point"? **abdulkarim@aK-laptop**:~$ lspci | grep ireless 03:00.0 Network controller: Atheros Communications Inc. AR9287 Wireless Network Adapter (PCI-Express) (rev 01) iw list Wiphy phy0 Band 1: Capabilities: 0x11ce HT20/HT40 SM Power Save disabled RX HT40 SGI TX STBC RX STBC 1-stream Max AMSDU length: 7935 bytes DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 8 usec (0x06) HT TX/RX MCS rate indexes supported: 0-15 Frequencies: * 2412 MHz [1] (20.0 dBm) * 2417 MHz [2] (20.0 dBm) * 2422 MHz [3] (20.0 dBm) * 2427 MHz [4] (20.0 dBm) * 2432 MHz [5] (20.0 dBm) * 2437 MHz [6] (20.0 dBm) * 2442 MHz [7] (20.0 dBm) * 2447 MHz [8] (20.0 dBm) * 2452 MHz [9] (20.0 dBm) * 2457 MHz [10] (20.0 dBm) * 2462 MHz [11] (20.0 dBm) * 2467 MHz [12] (20.0 dBm) (passive scanning) * 2472 MHz [13] (20.0 dBm) (passive scanning) * 2484 MHz [14] (disabled) Bitrates (non-HT): * 1.0 Mbps * 2.0 Mbps (short preamble supported) * 5.5 Mbps (short preamble supported) * 11.0 Mbps (short preamble supported) * 6.0 Mbps * 9.0 Mbps * 12.0 Mbps * 18.0 Mbps * 24.0 Mbps * 36.0 Mbps * 48.0 Mbps * 54.0 Mbps max # scan SSIDs: 4 Supported interface modes: * IBSS * managed * ** AP * AP/VLAN** * monitor * mesh point Supported commands: * new_interface * set_interface * new_key * new_beacon * new_station * new_mpath * set_mesh_params * set_bss * authenticate * associate * deauthenticate * disassociate * join_ibss * Unknown command (55) * Unknown command (57) * Unknown command (59) * set_wiphy_netns * Unknown command (65) * connect * disconnect

  Read the article

• Stuck at enemy movement

  - by Syed

  I am making a TD game in unity, Initially I made all of my enemy movements frame rate dependent say: I had a grid point1 at -22.65 and other at -21.1, diagrammatically: (-22.65) _________(-21.1)_______(-21.1+1.55) ...... so the distance on x axis between two points is 1.55, divided it by 25 jumps with each enemy jump of 0.062 of each frame. On reaching on next point of grid the enemy find again its path. All went fine until I have requirement of FastForward and Pause feature. I used timeScale property of unity but it wont work as they are frame dependent. I also tried double speed of enemy on clicking fast forward button at any time, it has some issues that enemy jumps are now less and it fails to reach on next grid point. Could someone suggest me solution to my problem. Do I need to change the enemy movement code to make it frame independent ?? I need the enemy to reach on the grid specific point I also need later to slow down any one enemy's speed when tower fires on it. Thnx

  Read the article

• Beta Testing Begins for New MySQL 5.6 Developer and DBA Certification Exams

  - by Brandye Barrington

  Be among the first to earn one of Oracle's new MySQL certifications. Exams for the Oracle Certified Professional, MySQL 5.6 Developer (OCP) and Oracle Certified Professional, MySQL 5.6 Database Administrator OCP) certifications are now in beta testing, are are thus available at a greatly discounted rate of $50 USD. Explore the Oracle Certification exam pages below, which share a wealth of details, including preparation steps, exam objectives, number of questions, time allotments, and pricing.  MySQL 5.6 Developer (exam 1Z1-882) MySQL 5.6 Database Administrator (exam 1Z1-883) START TODAYExam appointments are available now. Easily register online by taking the following steps: STEP 1: Go to pearsonvue.com/oracle. STEP 2: Select exam 1Z1-882 (for developers) or exam 1Z1-883 (for DBAs). These new OCP credentials raise the bar for MySQL Certified Developers and Database Administrators. Start today and be among the first to be awarded the new Oracle MySQL 5.6 certifications. QUICK LINKS Oracle Certified Professional, MySQL 5.6 Developer - certification track | exam | VIDEO (2:54) Oracle Certified Professional, MySQL 5.6 Database Administrator - certification track | exam | VIDEO (3:00) Oracle MySQL 5.6 Certification Launch Learn More: Beta Testing Registration for exam: Pearson VUE

  Read the article

• Oracle Enterprise Manager Extensibility News - June 2014

  - by Joe Diemer

  Introducing Extensibility Exchange Version 2 On the heals of Enterprise Manager 12c Release 4 this week comes version 2.0 of the Extensibility Exchange.  A new theme allows optimal viewing on a number of different computing devices from large monitor displays to tablets to smartphones.   One of the first things you'll notice is a scrollable banner with the latest news related to Enterprise Manager and extensibility.  Along with the "slider" and the latest entries from Oracle and the Partner community, new features like a tag cloud and an auto-complete search box provide a better way to find the plug-in, connector or other Enterprise Manager entity you are looking for.  Once you find it, a content details page with specific info related to that particular entity will enable you to access it at the provider's site and also rate and comment on that particular item. You can also send an email from the content details page which is routed to the developer.   And if you want to use version 1 of the Extensibility Exchange instead, you will be able to do so via the "Classic" option.  Check it out today at http://www.oracle.com/goto/emextensibility. Recent Additions from Oracle's Partner Community A number of important 3rd party plug-ins have been contributed by Oracle's partner community, which can be accessed via the Extensibility Exchange or by clicking the links in this blog: Dell Open Manage Fusion I-O ION Accelerator NetApp SANtricity E-Series PostgreSQL by Blue Medora You can also check out the following best practices and labs available via the Exchange: Riverbed Stingray Traffic Manager Reference Architecture Datavail Alert Optimizer Custom Templates Apps Associates' Oracle Enterprise Manager "Test Drives" for Oracle Database 12c Management Oracle Enterprise Manager Monitoring Essentials Oracle Application Management Suite for Oracle E-Business Suite

  Read the article

• What type of career path / jobs for a developer to have best work life balance?

  - by programmx10

  I know some people may look down on a question like this but I've been thinking lately a lot about what direction I can take my career to have a good work life balance, since I have been working for a startup where hours tend to drag on, etc and I find it often drains the life out of me. I have been going to interviews and some other companies are also startups / new companies and seem to have a similar attitude about working long hours. Maybe its the technologies I use, the type of development, I don't know but I'm curious if anyone can offer advice on what a path is to be a programmer / developer but work for a company that respects a regular work week and would only rarely find the need to move past this. I realize this won't lead to being the highest paid in my field but I'm ok with that and feel the tradeoff would be worth it as it would also give me time for my own projects, etc. I know some people may say this is too general but I believe it is a programmer specific question because I believe there tends to be a higher than average rate of working overtime, etc and people working in "startup" venture situations than in many other fields and there is definitely a mindset among a lot of people in the field of working long hours that doesn't exist in every industry.

  Read the article

• Upgrading/Installing Demantra 7.3.1.1? Check this out!

  - by user702295

  Here is a summary for relase 7.3.1.1 install/upgrade/features Data Preservation Setting for General Levels  Deploying Demantra Application Server 10g  Important upgrade Information  Known upgrade issues  Mozilla Firefox Browser  Installer Issues  Reviewing / Simulating General Level Data Such as CTO Base Model Demand  Failure Rate Calculation  Demantra SSL Client Authentication and Java 6  CTO functionality does not work in release 7.3.1.1 after upgrading from 7.3.0 using the ‘Platform Upgrade Only’ option.  User Privileges and Export Worksheet to Excell  Cookie Attribute Causes Logging Issue in Worksheet  List of bugs fixed in 7.3.1.1 See the following for details. Demantra 7.3.1.1 Install / Upgrade Known Issues, Notes, Guidance, Defects, Workarounds (Doc ID 1370518.1) Related Documents For Demantra Version 7.3.1.1 And If Demantra Supports The Required Stacks (Doc ID 1367141.1)

  Read the article

• Whats the greatest most impressive programing feat you ever witnessed? [closed]

  - by David Reis

  Everyone knows of the old adage that the best programmers can be orders of magnitude better than the average. I've personally seen good code and programmers, but never something so absurd. So the questions is, what is the most impressive feat of programming you ever witnessed or heard of? You can define impressive by: The scope of the task at hand e.g. John single handedly developed the framework for his company, a work comparable in scope to what the other 200 employed were doing combined. Speed e.g. Stu programmed an entire real time multi-tasking app OS on an weekened including its own C compiler and shell command line tools Complexity e.g. Jane rearchitected our entire 10 millon LOC app to work in a cluster of servers. And she did it in an afternoon. Quality e.g. Charles's code had a rate of defects per LOC 100 times lesser than the company average. Furthermore he code was clean and understandable by all. Obviously, the more of these characteristics combined, and the more extreme each of them, the more impressive is the feat. So, let me have it. What's the most absurd feat you can recount? Please provide as much detail as possible and try to avoid urban legends or exaggerations. Post only what you can actually vouch for. Bonus questions: Was the herculean task a one-of, or did the individual regularly amazed people? How do you explain such impressive performance? How was the programmer recognized for such awesome work?

  Read the article

< Previous Page | 72 73 74 75 76 77 78 79 80 81 82 83  | Next Page >