Search Results

Search found 2489 results on 100 pages for 'hp laserjet'.

Page 72/100 | < Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >

• Why DELL PowerConnect and Juniper are so rare ? Why do enterprises stick with Cisco ?

  - by Kedare

  Hello ! I have a little question, I'm actually studing IT in France, and when looking on alternative on the very [...] very expensive Cisco equipments, I've found Juniper and DELL PowerConnect pretty attractive on features and price, but I rarely see something else than the classics Cisco/LinkSys, HP Procurve and Netgear.. Why it's so rare to find those switch ? They looks really great but... I've never seen any Juniper or Powerconnect... Why do enterprises stick with the expensive Cisco ? I've tried to find how to buy both, it's quite easy with PowerConnect, everything is on the DELL website, but it looks it's very hard to find Juniper equipments in France :( Thank you !

  Read the article

• Stuck in power saving mode

  - by sazabi02

  I've got an LG monitor I tried attaching to my laptop for dual monitor goodness and it worked fine but when I tried attaching it back to the desktop it stuck in "Power Saving mode" and wouldn't go away. The CPU's starting up but nothing happens with the monitor. I try attaching it back to the laptop and it works fine again. I don't understand what could have happened. For reference, the laptop I'm using is an HP laptop with nVidia GT240M video card running on an i7 processor while the desktop runs on a Dual Core processor with an nVidia 9400GT video card. I've never had problems like these with other monitors I've attached my pc to. Anyone got any ideas?

  Read the article

• IP KVM switch, or serial console box for remote admin?

  - by grahzny

  We have a small server farm (11 now, may add more in the future) of HP Proliant DL160 G6s. They all run either Linux (server only, no X11) or VMware ESX. We had intended to get models with iLO, in case BIOS-level remote admin became an issue, but that didn't happen. I had an IP KVM switch recommended to me (along with some sort of Remote Reboot hardware.) I've since realized that none of our machines need GUI administration, so perhaps a serial console switch would be a cheaper and more appropriate option. Something like this: http://www.kvm-switches-online.com/serimux-cs-32.html Do you folks have an opinions on which way is a better choice? Should we go for the ease of setup (plug and go, instead of turning on the feature in the BIOS and making sure the serial settings are correct) and the flexibility of an IP KVM switch even with the extra cost? Or is a serial console switch just fine?

  Read the article

• Linux and ClickPads

  - by John

  I just got my Arch / Windows 7 dual-boot setup running... except for one thing. I have an HP dv6-3127dx laptop, which is an issue when it comes to Linux because it does not have a traditional touchpad, but a "ClickPad." This means where the left and right buttons exist, it is also sensitive to moving the pointer. The issue comes in when I try to steady the mouse with one finger, while clicking the left click with another, because the mouse freaks out. It's also an issue because it's not recognizing the right click whatsoever. I am currently using the default Synaptics drivers downloaded from pacman on Arch Linux, running Linux v2.6.36. EDIT: The question of course is, how can I fix this?

  Read the article

• Can I replace a broken PSU with one of a smaller size?

  - by Carson Myers

  I have a broken OEM power supply unit that is cooked. I'm browsing online to find a replacement and am happy to see that they don't cost too much -- the only thing is they all seem to have varying sizes. Is it a problem if I get a PSU that is smaller than the original one? This is going in an HP Pavillion a000, it's about five and a half years old -- I don't know if that means anything, I just thought there might be some recent standardized dimensions for PSUs or something. No idea.

  Read the article

• How to fix bluescreen in windows 7 with multi-boot?

  - by Ismail Sensei

  I have HP laptop 6730S with two Operating systems : Windows 7 Ultimate 32bit Centos 6.4 64Bit The GRUB2 is not installed in MBR, use Windows' bootloader. After I choose Windows in the start, the blue-screen appears with unmountable_boot_volume problem so I tried some help from similar questions here ( use Command Prompt and enter the following command: chkdsk /R C: ). But the problem is, I can't get repair my computer it took so long and nothing happened after I waited more than 2H and when I put my Windows 7 DVD to boot it charge the files then same thing happened nothing show up so I couldn't use command prompt. But when I use Centos everything works just fine the D partition i can mounted normally but C partition it shows me error and tell me to go to windows and repair it with Chkdsk command and here is where I am stuck.

  Read the article

• force other screen on boot

  - by PaoloFCantoni

  I have a multi-boot Windows 7 (32bit & 64 bit) on my HP Notebook. Unfortunately, the Notebook screen has been trashed (due to daughter dropping it). So I have attached a second screen. On the 64 bit system, after windows has started, the logon screen comes up on the 2nd monitor just fine. On the 32 bit system, the logon screen still comes up on the Notebook monitor and I have to open the lid, and shut it so that it then switches to the attached screen. In both cases the display has been set to only display on the attached screen (ie if I "identify" the attached screen says: '1'). Is there any setting I can use to force the OS to use the attached screen? TIA, Paolo

  Read the article

• Why does Windows spooler require an administrator account?

  - by Software Monkey

  Does anyone know what changes I might need to make to allow restricted users to print using a printer configured for spooling? My Windows XP SP3 system currently requires me to use an Admin account for printing if the printer is configured to spool documents before printing. If the printer is configured for direct printing it works for all accounts. This used to work and some months back it just stopped, and I can't pin down why. The printer, which is an HP PSC 1200 (an old printer) itself is configured for Everyone to have Print authority and my specific (restricted) account to have Full authority, that is Print, Manage Printers and Manager Documents. My HDD is locked down for restricted users given them only read authority to the entire file system except their data directories, which is how I have run my systems for years. I assume there may be a directory somewhere that I need to allow users to write to.

  Read the article

• SNMP - Value of CPU processor load not reflecting reality

  - by Ovesh

  Trying to plot CPU load on my server, with the following hardware: ProLiant DL360p Gen8 (same behavior on ProLiant DL360 G7). The machine is running VMWare ESXi5.1 To create a CPU spike I run dd if=/dev/zero of=/dev/null, and I know the CPU is overloaded, because I can see a correlating spike in the graphs displayed on vCenter. However, running this snmpwalk: snmpwalk -v 1 -c ******** 192.168.MY_IP 1.3.6.1.2.1.25.3.3.1.2 Shows the following results: iso.3.6.1.2.1.25.3.3.1.2.1 = INTEGER: 3 iso.3.6.1.2.1.25.3.3.1.2.2 = INTEGER: 2 iso.3.6.1.2.1.25.3.3.1.2.3 = INTEGER: 2 iso.3.6.1.2.1.25.3.3.1.2.4 = INTEGER: 3 Am I not looking into the right MIB? Should I be multiplying these by a constant? By the way, using HP Agentless Monitoring I was able to get some cpu stats, but not what I'm looking for, at least nothing I could find wading through these MIBs.

  Read the article

• MS-DOSdivide overflow

  - by repozitor

  when i want to install my dear application on MS-DOS os, i see error "Divide Overflow" what is the meaning of this error and how to fix it? the procedure of installing is: 1-partitioing my HDD disk 2-format C drive 3-installing MS-DOS 4-add the flowing lines to config.sys "DEVICE=C:\DOS\HIMEM.SYS DEVICE=C:\DOS\EMM386.EXE RAM DEVICE=C:\DOS\RAMDRIVE.SYS 6000 512 64 /e" 5-insert my floppy application and then restart 6-when boot process completed, all of the thing appear correctly and i now how to do the next steps note:for installing my application i need to boot from floppy app when i have ms-dos on my hdd disk i do it successfully on the Virtual machine, Q emulator but i can't do it on the real machine, Vectra HP PC, because of divide overflow

  Read the article

• Freezing with black screen after booting OS with AMD Catalyst driver

  - by Oleg

  I have ATI Mobility Radeon HD 5470 on my HP laptop. A few weeks ago I was confused with a weird trouble in proprietary drivers for my graphics card. When I start X server (or just boot Windows) system sometimes totally hangs up with black screen. The most annoying thing is that issue appearing is absolutely random (2 success, 3 fails, 1 success, 7 fails, etc.). It appears both on Linux (Arch, Debian 7) and Windows XP. I've tried reinstalling OS, drivers, etc. I've also tried updating BIOS. Then boot was successful for the next few times and issue appeared again (probably it was just a coincidence, because another BIOS updates gave no results). I really don't know what to do. Any ideas?

  Read the article

• How to Connect Firewire Camcorder to Laptop without firewire port

  - by bdk

  I Have a Sony Camcorder w/ a 4-pin firewire output. I have HP laptop I want to use it with, but the laptop, does not have a firewire port, just VGA, HDMI, USB, ESATA, Ethernet, and Modem. In addition, It doesn't have a PC Card slot for adding a Firewire card. Googling for "Firewire to USB adapter" returns a lot of hits, but no product that seems to do what I want. I assume I need a USB dongle that gives a firewire port and has drivers so that the PC sees it as a regular firewire port. Thanks for any recommendations

  Read the article

• HDMI output issue in Ubuntu

  - by xsznix

  Hi, I am using Ubuntu 10.04 on a HP notebook with a nVidia GT 130M graphics card. Whenever I connect a HDTV using the HDMI output and set all of the settings in the nVidia Control Panel, it will output to the HDTV, but cut off about 24 pixels on each side. Sometimes (but not often), it will work properly (display the entire screen), but I cannot get it to work thus consistently. I have tried using resolutions of 1920x1080, 1360x768, 800x600 with two HDTVs of different brands, with and without forcing full GPU scaling, with and without syncing to VBlank (what is this?), etc., and also using a Linux Mint 9 computer with integrated Intel (X4000-ish, don't remember exactly) graphics. The problem persists no matter what, but only with HDMI output (VGA works fine). The same computers works fine with HDTVs in Windows. Any ideas?

  Read the article

• How to select a server that supports Windows scheduled file IO

  - by Kristof Verbiest

  Background: I am developing an application that needs to read data from disk with a fairly consistent throughput. It is important that this throughput is not influenced by other actions that happen on the disk (e.g. by other processes). For this purpose, I was hoping to use the 'Scheduled File I/O' feature in Windows (throught the GetFileBandwithReservation and SetFileBandwithReservation functions). However, this StackOverflow question has thought me that this feature is only available if the device driver supports it. Currently I have no computer at my disposition that seems to support this feature (I have an HP Proliant server and a Dell Precision workstation). Question: If I were to order a new server, how can I know beforehand if this feature will be supported by the device driver? How 'upscale' does the server have to be? Has anybody used this feature with success and cares to share his experiences?

  Read the article

• Using "enterprise" switches in home network?

  - by Industrial

  Hi everyone, After more than 12 years working with computers, I am still way behind when it comes to networking, so please bear with me :) As of this Christmas, the number of computers in my home has increased and it's well about time to upgrade the current network hardware in order to offer LAN connection to all computers. Trying to find a cheap solution, A close friend offered me a great deal on a "enterprise-class" Switch from HP (more LAN ports than I would ever need), at the same price as what a brand new Netgear or D-link Switch with 6/8 ports would cost me in retail. Would it be common sense to get this one and start using it immediately and never again have to worry about running out of LAN connections, or am I taking on a bigger bite than what I could chew?

  Read the article

• RAID across SAS controller ports

  - by BlueGene

  Hi, I'm managing a HP DL360 G5 machine. It has a SAS controller with two ports. Port 1 is attached to 4 drive bays and Port 2 has 2 bays. The machine currently has 3 drives connected to Port 1 with RAID 5 configuration. I'm trying to max out the bays by adding 1 disk in port 1 and 2 in port 2. Can I group those three disks(1 disk-port, 2 disks-port 2) in a RAID 5 configuration?

  Read the article

• Problems with Adobe Flash

  - by Georg Scholz

  I'm running Windows 7, 64-Bit on a Core-i5 HP Notebook. For approximately the last 3 months, I've had major problems with Adobe Flash. Flash has been uninstalled and installed again multiple times. No changes. Here is what happens in different browsers: (All browsers are in the latest version as of this post) Firefox: Doesn't work at all. This bothers me most, since FF is my favorite browser; I'm using a lot of Plugins. Have tried to de-activate all Plugins, but no change. IE and Chrome: Works, but most pages with Flash are stuck during page load for ~30 seconds. After that, everything is fine. Opera: No problems, everything working as it should. Strange, eh? Any help is highly appreciated!

  Read the article

• Mouse settings/properties dialog box won't open in Windows 7

  - by ymasood

  Hi, I have a problem trying to open my computer's mouse settings by either going to the command prompt and typing, 'control mouse', 'main.cpl' (as researched online) or simply by trying to go to the Control Panel and clicking on 'Mouse' under Hardware and Sound section. I have also tried running cmd as Administrator and trying the above commands but that is of no help. Lastly, if I search for 'mouse' and click 'Mouse' from the Windows search bar, that doesn't work either. In the past I had bought and installed Microsoft Wireless Mobile Mouse 6000 software and have just now bought and installed HP's Wireless Comfort Mobile mouse. Any help in this regard is highly recommended. I won't be able to restore or reinstall my laptop since it's a heavy use machine. Thanks! Yasser

  Read the article

• Problems Installing Windows Server 2008 R2

  - by ProfKaos

  I've just finished 3 day download (with breaks) of Server 2008 R2, and am very eager to install it on my dev machine (my laptop, an HP Pavilion with a 2xTurion 64 cpu). If I mount the ISO and try and run Setup.exe, I get told Setup.exe is not a valid Win32 application. I tried burning the ISO to DVD (as files), but my machine wont't boot from DVD. If I re-insert the DVD, so that autorun comes into play, I get told something like "the setup is not valid for this version of Windows" Any suggestions as to what I might try, either to diagnose the problem, or to avoid it?

  Read the article

• Optimising bare-metal hypervisor installation

  - by Stephen

  what is the best way to install a bare metal hypervisor (i.e. to host multiple VM's)? I spoke to a friend and he is using a HP server to host all his VMs with VMware ESXi, but he installed the VMWARE esxi software on a flash card. He can then use his full hard disk capacity from each drive for the VMs. Is this a pretty standard setup when configuring a bare-metal hypervisor? How do you guys do it, and what is best?

  Read the article

• Erase all traces of Windows 8

  - by user1032531

  Just bought a new HP pavilion desktop with Windows 8. I wish to totally remove Windows 8 and all data on the hard drive, remove any windows partitions, delete all data, and then install a fresh Linux. Problem is I can seem to get to boot from USB or boot from CD. It appears that Windows 8 added the following two "features": UEFI which substitutes what we have known as the BIOS Secure Boot which prevents anything but the installed operating system How do I completely and totally erase all traces of Windows 8? Is it still possible to reformat the hard drive? I don't want a duel boot, I don't want to go back to Windows 7, I just want anything Windows gone.

  Read the article

• Need help diagnosing cause of BSOD

  - by n00neimp0rtant

  I've got a Windows 7 PC here that was getting very frequent BSODs. The error codes were variant (IRQL_NOT_LESS_OR_EQUAL, PAGE_FAULT_IN_NONPAGED_AREA, ATTEMPTED_WRITE_TO_READONLY_MEMORY), and it was impossible to use the computer for longer than an hour without getting one. I backed it all up and reinstalled Windows completely, thinking that it was a corrupt driver issue. Unfortunately, I'm still getting the BSODs with the same error messages on this fresh installation. This tells me that it must be some faulty piece of hardware, but I'm not sure what it would be. I ran Memtest+ on the machine, but did not get any errors after 2 passes. I also ran a few built-in recovery mode scans from the HP recovery partition. I need some ideas on how to test the rest of the hardware to solve this issue.

  Read the article

• BIOS password and hardware clock problems

  - by Slartibartfast

  I have HP 6730b lap top. I've bought it used and installed (Gentoo) linux on it. BIOS is protected with password, and guy I bought it from said "I've tweaked BIOS from Windows program, it never asked me for password". I've tried to erase password by removing battery, but it's still there. What did get erased obviously is hw clock. This is what hapends: a) I can leave lap top in January 1980 and it works b) I can correct system time, but boot wil fail with "superblock mount time in future" from where I need to manually do fsck and continue boot c) I can correct system time and sync it with hwclock -w but than it will behave as b) and it will reset BIOS time to 1.1.1980 00:00 So I need either a way to bypass a BIOS password (wich after lot of googling seems impossible),a way to persist a clock, or a setup that will enable hw clock in eighties, system clock in present time and normal boot.

  Read the article

• Internal LTO tape drive becomes hot

  - by claasz

  We use an internal LTO3 tape drive (HP Ultrium 920) in a PC (no particular server hardware) running Linux. The tape drive becomes quite hot - I don't have the exact temperature, but you may touch it for a second or two, then it hurts ;-) This happens when the tape has nothing to do (during reading/writing, it might become even hotter, I haven't checked that). Besides that, the system is working fine. Now I'm wondering Why does the tape becomes so hot? Is this something I need to care about? Is there something like a 'standby' mode for the tape? (I think it should not consume that much energy when it is not used)

  Read the article

• IBM BladeServer Chassis compatibility

  - by Matt

  Hi, I'm looking at buying a 3 year old blade server. My question is, if I buy it and want to insert a current model blade, will it fit? Also, if the chassis goes "POP" and I need to replace it, will the current model chassis fit 3 year old blades? What about Power supply replacements? The chassis I'm looking at is this: IBM FRU / PN: M8677-3XM with DVD reader The blades are all IBM HS20's. We've had a good run with IBM hardware and although there is some nice ex-lease HP hardware available, my understanding is that backwards comparability is not so well maintained. Is this true?

  Read the article

< Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >