Search Results

Search found 2489 results on 100 pages for 'hp laserjet'.

Page 70/100 | < Previous Page | 66 67 68 69 70 71 72 73 74 75 76 77  | Next Page >

  • Clone remote CentOS server to local test server?

    - by dannymcc
    We have a dedicated server running ContOS 5.5. The server runs our Magento store and a basic php website with mysql. I have a spare rack server in my office (HP ProLiant DL360 G4) that has more than enough storage space to store a duplicate of our dedicated server. I would like to clone the dedicated server entirely and have a local duplicate. It wouldn't need to be kept in sync because I can do that with GIT. The reason I want to do this is simple; learn more about the dedicated server and CentOS. Is this possible? I have SSH access to the dedicated server and obviously complete access to the local server.

    Read the article

  • How can I dual boot a UEFI OS and a legacy boot OS, or convert stock Windows 8 to BIOS?

    - by The Great Widi
    I have a computer (HP Pavilion g6-2342dx) which came with Windows 8, and thus the new UEFI boot system. I would like to install a few OS's which are not EFI compatible, and Arch GNU/Linux with BIOS mode. However, I would not like to completely wipe all my files to set to legacy. My preferred options would be to: 1. Multiboot legacy OS alongside my EFI os 2. Convert Windows 8 and Ubuntu to legacy without reformatting or switching to MSDOS part table. If anyone could suggest a solution or a method, your help would be appreciated! Thanks!

    Read the article

  • Question regarding an NAS server and remote users

    - by JB
    I have a client that requires a massive amount of storage space but: Doesn't want to spend very much money Needs remote users (across the country) to be able to pull data from it and store to it, as well. Can this be done with an NAS Server such as the Western Digital Sharespace Network Storage System? I do not believe the client wants to spend over $1400 and HP is offering 8TB for $1299. Also, if anyone has any other ideas besides using NAS, please let me know. Thanks in advance for any help.

    Read the article

  • Disable Memory Modules In BIOS for Testing Purposes (Optimize Nehalem/Gulftown Memory Performance)

    - by Bob
    I recently acquired an HP Z800 with two Intel Xeon X5650 (Gulftown) 6 core processors. The person that configured the system chose 16GB (8 x 2GB DDR3-1333). I'm assuming this person was unaware these processors have 3 memory channels and to optimize memory performance one should choose memory in multiples of three. Based on this information, I have a question: By entering the BIOS, can I disable the bank on each processor that has the single memory module? If so, will this have any adverse effects or behave differently than physically removing the modules? I ask due to the fact that I prefer to store the extra memory in the system if it truly behaves as if the memory is not even there. Also, I see this as an opportunity to test 12GB vs. 16GB to see if there is a noticeable difference. Note: According to http://www.delltechcenter.com/page/04-08-2009+-+Nehalem+and+Memory+Configurations?t=anon, the current configuration reduces the overall data transfer speed to 1066 and in addition, the memory bandwidth goes down by about 23%.

    Read the article

  • Computer won't recognize second WD internal HD

    - by music man
    I installed a Western Digital Caviar Green 1TB internal hard drive, and want to use it for back up. My BIOS recognizes the device, but it is not recognized in Disk Management. It also is not recognized in "my computer." When I right-click my C drivepropertieshardware, I see it listed. First the drive was plugged into SATA port 1 on my motherboard, then I tried it in port 3, where it remains. I've been working on this for hours. Any help would be appreciated. More info Hard drive model #:WD10EADS-65M2B1 Windows 7 Home Premium 64 bit Service Pack 1 Computer:HP Model p6404y, Processor:AMD phenom II x4 820 2.80GHZ 8 gigs RAM

    Read the article

  • Merit and demerits for various Linux fiberchannel multipath options

    - by wzzrd
    On our Linux servers, we currently use HPs qla2xxx drivers, because it has multipathing (active/passive) built in. The are, however, various other options, like Red Hats device-mapper-multipath with the stock qla2xxx drivers (multibus and failover) and things like SecurePath and PowerPath (both of which can do trunking, iirc). Can someone tell me what the merits and demerits of the various options are (if I can ask such a question), besides the obvious fact that the {Secure,Power}Path options cost vast amounts of money? I'm mainly interested in the freely available options, like HPs qla2xxx vs. Red Hats multipathd and possible other open source solutions, but I would like to hear good reasons to go for the commercial solutions too. UPDATE: I'll be benchmarking various options the coming few days (the average of 10 runs of iozone for each option (options being native qla2xxx failver, native qla2xxx multibus, HP qla2xxx failover)). I'll post a summary of results here for those interested.

    Read the article

  • Nested RDP and ILO/VMWare console sessions, latency and keystroke repetition

    - by ewwhite
    I'm working on a remote server installation entirely through ILO. Due to the software application and environment, my access is restricted to a Windows server that I must access through RDP. Going from that system to the target server is accomplished via HP ILO2 or ILO3. I'm trying to run a CentOS installation in an environment where I can't use a kickstart. I'm doing this via text mode, but the keystrokes are repeating randomly and it's difficult to select the proper installation options. For example: ks=http://all.yourbase.org/kickstart/ks.cfg ends up looking like: ks====httttttp://allll..yourbaseee.....org/kicksstart/ks.cccfg I'm doing this using Microsoft's native RDP client (on Mac and Windows). I've also noticed this before when running installations or doing remote work in nested sessions. Same for typing into a VMWare console in some cases. Is there a nice fix for this, or it it simply a function of the protocol(s)?

    Read the article

  • Server vendor that allows 3rd party disks

    - by Alvin S
    As noted here, Dell is no longer allowing 3rd party disks to be used with their latest servers. As in, they don't work period. Which means that if you buy one of these boxes and want to upgrade the storage later, you have buy disks from Dell at significant premiums. Dell has just given me a very strong reason to take my server business elsewhere. My company buys (instead of leasing) our servers, and typically uses them for 5 years. I need to be able to upgrade/repurpose storage periodically, and do not want to be locked in to whatever Dell might have in stock, at inflated prices to boot. As you will see in the comments of the above link, it seems HP is doing the same thing. I am looking for a server vendor that offers 3-5 year warranty with same day/next day onsite service, and allows me to use 3rd party disks. Suggestions?

    Read the article

  • How to grow from single server setup

    - by Jenkz
    I'm looking for resources on how to grow our server setup. We currently have one dedicated server with Rackspace in the UK of the following spec: HPDL385_G2_PrevGen HP Single Dual Core Opteron 2214 (2.2Ghz) 4GB RAM 2x 10,000 SCSI Drives in RAID 1 Our traffic is up to 550,000 UVs per month. The site runs off a PHP and MySQL setup. The database gets an absolute hammering, we have many complex queries joining multilpe tables. We are using APC for PHP caching. I'm getting to the stage where I've done as much DB and query optimisation as I can and wonder what the next step should be...... I've looked at memcache, but I've got the impression that his requires a large amount of RAM and ideally a dedicated box.... So is the next step to have two boxes; one for database, one for Apache? Or is there a step I've overlooked. Our load is usually around the 2 mark, but right now it's up at 20!

    Read the article

  • How to grow from single server setup

    - by Jenkz
    I'm looking for resources on how to grow our server setup. We currently have one dedicated server with Rackspace in the UK of the following spec: HPDL385_G2_PrevGen HP Single Dual Core Opteron 2214 (2.2Ghz) 4GB RAM 2x 10,000 SCSI Drives in RAID 1 Our traffic is up to 550,000 UVs per month. The site runs off a PHP and MySQL setup. The database gets an absolute hammering, we have many complex queries joining multilpe tables. We are using APC for PHP caching. I'm getting to the stage where I've done as much DB and query optimisation as I can and wonder what the next step should be...... I've looked at memcache, but I've got the impression that his requires a large amount of RAM and ideally a dedicated box.... So is the next step to have two boxes; one for database, one for Apache? Or is there a step I've overlooked. Our load is usually around the 2 mark, but right now it's up at 20!

    Read the article

  • Forcing logon to Air Watch server upon joining wifi

    - by DKNUCKLES
    I'm setting up a wireless controller that I would like to leave as unsecured. When a user connects to this network they need to be forwarded to a specific page where they can authenticate with the Air Watch system they have in place. Once authentication takes place, a profile will be downloaded to their device and we can administer the devices accordingly. I'm mulling over how I can force the page to the user when they log in. The methodology I'm thinking about working with is creating a NAT rule for that VSC that would forward all port 80 and 443 traffic to the airwatch server. Once they authenticate, a profile will be downloaded which will connect the devices to an Virtual Access Point who's SSID isn't broadcasted. Is this methodology correct or can someone think of an easier / more efficient way of accomplishing this? The controller is an HP MSM720 for what it's worth.

    Read the article

  • Force the computer to always use current display settings

    - by sazpaz
    So I'm having a terrible black screen problem with my new installation of Windows 8. The screen basically goes to black every time I turn it on or sleep, or connect to an external or monitor. I dont really know what steps actually cause the problem and cant seem to figure what steps allow the screen to come back, besides forcing restarts, going to sleep and waking up, and smashing Win + P. I have a strong feeling it's because the Switchable graphics I have (Intel HD + Radeon 5060), so I'm looking for a way to make the computer always use a specified mode (i.e the current mode I'm on, that does show stuff on the screen) and force it to use it everytime? Any ideas? EDIT: I've Installed all the latest drivers I've found. Tried most of the solutions around the web for this problem. Updated the BIOS to UEFI (from HP Support Assistant), etc. Laptop is an HP- Envy 14

    Read the article

  • Ultrium 3 tape drive shoe-shining, 3Mb/s: and it's not the cable

    - by mowsala
    I have a HP 960 Ultrium 3 tape drive. Since I got it, (second hand, £90) I've been experiencing shoe-shining. Writing with tar in Linux, I average about 3Mb/s write speed. I've tried replacing both the SCSI card and the cable now, both of which made no difference at all. A curiuos observation I have made is that the write rate is not consistent. Sometimes it will write for over a minute without shoeshining, but more often, just a few seconds. I've also tried several tapes, different source drives, and even writing from Windows Backup, to no avail.

    Read the article

  • VMware Virtualisation - Convert 64bit Windows Server to 32bit VM?

    - by dannymcc
    I have just started playing around with Vmware sphere and have the hypervisor OS installed on a spare HP ProLiant DL360 G4. I have created a test virtual machine running Ubuntu which has worked well. As a test project I wanted to convert a powered on server running Windows Server 2008 64bit into a virtual machine. As soon as I ran the Vmware Go software to start the conversion it became apparent that I cannot run 64bit guest OS's on that particular server. So, is there a way of migrating 64bit to 32bit during the conversion?

    Read the article

  • Microsoft Office 2007

    - by nardone25
    Hello everyone in serverfault. I am having a big problem at my job. I will let everyone know what I am using. I have two ibm x3690 servers with vmware esxi on both. Our product server has 8 vm on there. I have two lefthand san from HP. I have a watchgurd firewall. Our other site. I have one server over there ibm x3b90 sever. with one vm on there. I have a cisco 1700 router. and another watchgurd firewall. I have a vpn tunnel to my watchgurd firewall, to my cisco router. Site one works great. site two is having problems saving word documents and having problems printing in publisher 2007. Can someone please help?

    Read the article

  • Enabling 8021q on a nic

    - by Chris Phillips
    Hi, I'm trying to get a vlan interface on a bonded nic (Centos 5.5) and whilst the interface has been very happily created with vconfig I'm seeing no traffic on it at all. Running tcpdump and tshark on the underlying eth0 I see no sign at all of vlan tags in the traffic, and I'm wondering if there's somethign I'm missing on the server side as the network dept say they are sending me the tagged data. I've got the 8021q module loaded, however under lsmod it shows it's only being used by the cxgb3 module, for an unused onboard iSCSI card, whereas my nics (on an HP DL380 G7) are driven by bnx2 and e1000e modules. Should these modules be listing 8021q as used module? should I have something conrete in /etc/modprobe.conf? Thanks Chris

    Read the article

  • How to make a pxe bootable 10MegaByte or larger dos image?

    - by rjt
    Would like to make a "massive" DOS floppy disk image, say 10MegaBytes or more containing all the firmware updates i need for any system, harddrive, BIOS. i do not need the DOS image to be networkable as everything will be on the PXE booted image, but networking would be nice. Since ZipDisks were attached to the floppy disk controller and were over 100MegaBytes, this should be possible. i tried a long time ago to do this and spent too much time on it only to have it fail to boot. So if someone has reliable instructions on how to create such a nightmarish beast and edit it, please let me know. One image that can used for PXE and copied to a USB stick would be a plus. Too bad manufacturers don't supply a single bootable Linux ISO containing all their firmware updates, that would be easy to boot over-the-lan and have networking. HP servers do this and it is awesome.

    Read the article

  • External Display connected to Macbook pro won't sleep

    - by Moiz
    I have Macbook Pro with OSX 10.6.8. It is connected to external display (HP 2311x) using Thunderbolt to HDMI cable. My Macbook display goes to sleep after every 15 minutes of inactivity but the external display won't go to sleep. It does try to go to sleep but wake up immediately. It does that in never ending loop. I have to manually turn off the external display. Is there some settings I need to change to make external display sleep when Macbook display goes to sleep? Any suggestions? Thanks in advance!!

    Read the article

  • Will a database server perform better running on 2 CPUs with 16 cores or 4 CPUs with 8 cores?

    - by AlexOdin
    What I have: an online financial application (ASP.NET, C#) at peak we have 5K+ simultaneous users backend is running on Oracle 11g (active server + stand-by using Active Data Guard). At peak - 4K-5K database sessions Oracle is installed on Linux 5.8 (Oracle's unbreakable version) the database size: 7TB disk storage: NetApp (connected with 10GB network) I would like to replace old servers (IT will purchase HP blades BL685C). Servers will have 256GB of RAM. I need your help to figure out what to do with CPUs and cores. Options: 2 CPUs (2.3 GHz) with 16 cores each 4 CPUs (3.0 GHz) with 8 cores each Question: Which one should I pick? P.S. Next year, we will migrate from Oracle to SQL server. I hope, whatever option you recommend will work for both platforms

    Read the article

  • Multiple VLAN on one switch port

    - by Macropus
    I have a HP ProCurve 1810G-8 which I currently use as a normal switch between 3 servers and a firewall. 2 of the servers are ESXi hosts, and one is a Nexentastor box with 2 iSCSI target LUNs. As the iSCSI traffic is on the same LAN as all other traffic, I would like to switch this to use a SAN for iSCSI traffic and the LAN for all other traffic. The Nexentastor box only has 2 NICs, and as such, with a physical arrangement, I presume that one must be plugged into the SAN VLAN and one on the LAN VLAN ports of the switch. Is there a way to have multiple VLANs over the same port? e.g. the Nexentsator box has 2 NICs, both plugged into the switch, both ports with access to both of the VLANs?

    Read the article

  • My Windows 8 computer does not come out of Standby

    - by Jikag
    My computer will not come out out of standby. It has had this issue ever since I bought it ~4 years ago. When I purchased it, It came with Vista, I have since upgraded it to 7 and now 8 Pro, each time hoping that it would fix the problem, each time finding that it did not. My computer is an HP Pavilion Model #: m9500y. The computer goes into standby, but does not come out of it properly. If Hybrid sleep in on, it does not respond at all. If Hybrid sleep is off, It comes out and I can see the desktop for a bit, but then the screen goes black again and I have to reboot. I have tried Running a sfc, and a chkdsk in case it's a corrupted file, but it hasn't helped. This isn't too serious an issue because I can just shutdown my computer and turn it on the old fashioned way, but it is annoying and I would appreciate some advice going forward as I'm currently stumped.

    Read the article

  • RHEL 5.1 loses changes to /etc/hosts above lines for `localhost`

    - by warren
    Is there a known fix (other than upgrading from 5.1) to fix /etc/hosts from being replaced on reboot? I discovered this behavior when running HP's Server Automation tools. HPSA sets-up a variety of local aliases for itself to use for different components to communicate wit each other. However, after reboot, the hosts files is reverted to a quasi-plain-vanilla version: all lines above the entry for localhost are removed. Manually re-adding those needed lines below the entries for localhost works, but is non-ideal. Is there a fix for this behavior? I do realize that RHEL 5u1 is not officially supported for HPSA 7.8, but the hosts file resetting is not good for a variety of other reasons, too.

    Read the article

  • Software RAID 10 on Linux

    - by vpetersson
    For a long time, I've been thinking about switching to RAID 10 on a few servers. Now that Ubuntu 10.04 LTS is live, it's time for an upgrade. The servers I'm using are HP Proliant ML115 (very good value). It has four internal 3.5" slots. I'm currently using one drive for the system and a RAID5 array (software) for the remaining three disks. The problem is that this creates a single-point-of-failure on the boot drive. Hence I'd like to switch to a RAID10 array, as it would give me both better I/O performance and more reliability. The problem is only that good controller cards that supports RAID10 (such as 3Ware) cost almost as much as the server itself. Moreover software-RAID10 does not seem to work very well with Grub. What is your advice? Should I just keep running RAID5? Have anyone been able to successfully install a software RAID10 without boot issues?

    Read the article

  • Cisco FC SAN switch decision

    - by Chopper3
    I've got to buy a bunch of FC SAN switches in the next week or so, I have to, and want to, buy Cisco MDSs. Servers are HP BL490c G6's in C7000 chassis with Virtual-Connect Flex-10 ethernet interconnects and VC FC interconnects (Emulex HBAs btw), all running ESX 3.5U4 (for now). I think I've only really got two choices; MDS 9509's with dual-supervisors with a single 48-port 4Gb FC card MDS 9222i's with single supervisor and the built-in 18-FC-port/4-GigE-FCIP-port option Both have the same functionality (I think, buying the enterprise licence btw), both have plenty enough performance and adequate ports for now and the next three years. The 9222i's are about 55% the price of the 9509's - logic says get the 'i's but will I really miss the dual-supervisors? I've got lots of 9509's with dual-supervisors that I'm very happy with but I'm not sure I've every benefitted from the dual-sups in the past and they are nearly twice the price - but if I don't buy them and miss them I can't retrofit them later. What are your thoughts?

    Read the article

  • Which is better for running Ubuntu and other Linux OSes, Chromebook or Windows, why? [on hold]

    - by Serge
    I'm learning programming and I would like to switch to a Linux OS, perhaps Ubuntu, to continue this, but the current machine is generally getting pretty old and slow and Windows is the least favorite option for production, and I can manage getting something new right around the price range of the nicest Chromebook on the market right now. However, I have compared specs of HP Chromebook 14 with those of regular PC laptops that roughly cost the same, and the latter consistently have approximately the same and sometimes higher (like the processor speed) specs. Yet usage of Chromebooks for this purpose is pretty widespread nowadays. Is this because they were initially built for a Linux OS - and is it really THAT crucial - or are there other major factors at play here?

    Read the article

< Previous Page | 66 67 68 69 70 71 72 73 74 75 76 77  | Next Page >