Search Results

Search found 2489 results on 100 pages for 'hp laserjet'.

Page 74/100 | < Previous Page | 70 71 72 73 74 75 76 77 78 79 80 81  | Next Page >

• Where do I connect the two red SATA cables on my motherboard?

  - by Dennis Smith

  I have a Compaq Presario PC SR5110NX. The Processor is AMD Athlon 64 3800+. It has 512 MB of RAM and a 40GB Hard Drive. I'm running Windows XP Professional on it. I have 2 SATA drives, one is black and the other is white. I have 2 red little cables, and they have the letters and numbers on them. On one side of the cable it says "HP P/N:5188-2897 0720". My motherboard is a MCP61PM-HM Rev 1.0B. Where do I connect the two SATA connectors?

  Read the article

• Can ECC registred RAM 512 MB DDR-400 be used on thinclients - specifically Neoware CA10/CA22?

  - by Ramaswami Murugan

  Can ECC registered RAM 512 MB DDR-400 be used on thin clients - specifically Neoware CA10/CA22? Neoware thin clients (now HP Thin clients e100/e140) have 2 slots for a max of 1 Gb of DDR-400 RAM (184 Pin PC3200). I notice that the price of ECC reg RAM is considerably less than that of non-reg RAM ($10 for ECC reg 512 MB vs $24 for non-ECC reg 512 MB) so this approach is worth it for me to upgrade my memory on numerous thin clients (approx 40). The BIOS is Phoenix E686 and the chipset is VIA 800MHz - 1 Ghz.

  Read the article

• Nagios Check_hpjd giving me problems!

  - by Mister IT Guru

  When I run the following [root@host plugins]# ./check_hpjd -H printer1.mydomain.com : Timeout from host printer1.mydomain.com I have Net-snmp installed on my system, I noted that i didn't have net-snmp-utils installed, and then I was able to run [root@host plugins]# snmpwalk -Os -c public -v 1 printer1.mydomain.com system sysDescr.0 = STRING: HP ETHERNET MULTI-ENVIRONMENT sysObjectID.0 = OID: enterprises.11.2.3.9.1 sysUpTimeInstance = Timeticks: (325408663) 37 days, 15:54:46.63 sysContact.0 = STRING: sysName.0 = STRING: printer1 sysLocation.0 = STRING: sysServices.0 = INTEGER: 72 So I know that the printer is working as expected, (as far as SNMP is concerned). But when I run [root@host plugins]# ./check_hpjd -H printer1.mydomain.com -C public Error in packet () I get this error - From what I've tried so far, I know my host can communicate via SNMP, I know the printer responds via SNMP, so I guess I'm left to look at the plug-in, which I will be checking up on. I'm new to SNMP, I am investigating this with my good friend Google search, but I am on a learning curve here, so please forgive my questions if they sound stupid,

  Read the article

• SAN alternative for VMWare

  - by CogitoErgoSum

  Has anyone utilized something aside from a SAN to run their VMWare images off? We are looking to drop in two HP Servers and VMWare on them and run them off a SAN. Due to the cost of SAN though our CFO and VP are wondering if there are any viable alternatives (I.e. NAS) that can effectively run a VMWare. I can't think of any off of the top of my head. IF anyone can provide one or a good article outlining why to stick to SAN that'd be great.

  Read the article

• Laptop abruptly powers off after few seconds of booting

  - by Alan Mendelevich

  I have a 3 year old HP Pavilion dv2208 laptop. Recently it started abruptly powering off in like ~20-30 seconds into Windows boot sequence after almost every reboot/shutdown. Even if I leave it in Repair/Start Windows Normally stage it powers off anyway. The only way I managed to workaround this is to enter BIOS setup screen and leave it on for no less than 10 minutes. I don't know what happens there but this helps every time. Any ideas of possible ways to fix this that don't include replacing motherboard are highly appreciated. P.S.: I've tried resetting BIOS to defaults, updating to the latest BIOS version, etc. Happens with both Vista and Windows 7.

  Read the article

• Problem setting up DL360G5 with scsi RAID

  - by ernelli

  I have a problem with reinstalling OS on a DL360G5. The BIOS [F9] do not detect any disc controllers and the HP SmartSetup did not find any compatible controllers. Inside the server, the two SCSI disks are conncted to a RAID controller using BCM8603 chipset. How is disc contoller supposed to be setup? I have tried to do a full BIOS reset. EDIT At the moment we suspect that the Smart Array controller E200i/412205-001 is broken. Are there any status LED's that indicate failure or success during start up? At the moment all LED's are off.

  Read the article

• Logitech M185 Wirless Mouse issue

  - by Elliot Harrison

  An issue with a Logitech M185 mouse today. A user is unable to use the device. The device works perfectly fine on my PC (It appears as HID-compliant mouse), but not on her laptop. It does not appear in her device manager on the 'Mice and other pointing devices' section. I did notice an unknown device in the Universal Serial Bus Controllers section, but when I try to update the driver, it says it has the most up to date driver. We've tried plugging in the dongle in multiple USB slots but no luck. Any advice? It's a HP 620 Laptop on Windows 7. Thank you :)

  Read the article

• How to verify if a clean windows 7 install was done or an upgrade over vista was what the tech did?

  - by Melody

  I'd like to know if the install was truly done as a clean Windows 7 or If the windows 7 was installed over the vista as an upgrade - 32 bit and ultimate verstion? I noticed hp game stuff (wild tanget or something ) during an virus scan and it was not suppose to be in a clean install...so now I'm wondering how to verify what kind of install Really happened/ Any help? I'd appreaciate knowing how to know the difference, if I was led to believe something that was not true...I paid for a clean install. Did I get that or not is my concern Thank you so much Melody

  Read the article

• External monitor image not centered in the screen

  - by kemp

  I'm using Xorg 7.5 on a Radeon HD4870 with the FOSS radeonhd server on my HP 6830s. The laptop has a VGA connector and I attach it to a 37" panasonic plasma TV. It works fine except for a little annoyance: when activated, the TV screen is set to the resolution of 1360x768 (which it reports as being the highest it supports) but all the image is shifted by about 100 pixels to the right. I can't see the leftmost part of the page, and I have a black vertical bar to the right. If I change the resolution to 1024x768 there is no shifting, the image fills the entire screen with no parts hidden, but at this resolution the image is stretched. How can I tune the position on the external monitor so that the image is centered in the screen filling it entirely?

  Read the article

• Monitoring over Time with Nagios: How?

  - by David

  Nagios in its standard usage monitors with point-in-time checks: either something is - or is not - true. Other tools like SGI's PCP, HP's MeasureWare, and SEC provide monitoring over time - monitoring things like average disk access time over the last five minutes, or other similar items. Is there anything like this for Nagios? I'm already running NDOUtils, which seems like a natural source for such data. I'd like to have something that would monitor and fire off alarms based on a time-based check using historical data. Is there anything like this for Nagios?

  Read the article

• Weather Logging Software on Windows Home Server

  - by Cruiser

  I'm looking for some weather logging software that I can run as a Windows Home Server add-in, or as a service on my Home Server, so I don't need to log into my Home Server to log weather data. I have an Oregon Scientific WMR918 weather station, and an HP MediaSmart EX485 Windows Home Server. The two are currently connected through a serial bluetooth adapter, but that shouldn't matter as the computer sees it basically as a serial device. I'm currently using Cumulus to log data and upload to Weather Underground, but it is a regular windows application, so I need to remain logged into my Home Server by RDP in order to run the software (I disconnect, but don't log off so the session remains open). Ideally I would like something to run as a service or WHS add-in, so that it runs all the time without logging in, can log data from my WMR918, and can upload to Weather Underground. Thanks!

  Read the article

• My Tablet PC has a jog dial (typically used for scrolling up and down) but it does not work by defau

  - by techtechmo

  I have an HP Compaq TC4400 and I recently was able to make most of the Tablet PC functions work in Ubuntu 9.10. (The step-by-step guide can be found in my blog.) Unfortunately I have yet to make the jog dial work. This would be particularly useful for scrolling up and down websites and documents when the TC4400 is in slate mode (with no access to the keyboard). I would be much obliged if anybody could tell me: How to find out the input button/key assignment that Ubuntu 9.10 has for jog-up and jog-down; How to assign jog-up to scroll up (D-pad key UP, or PAGE UP) and jog-down to scroll down (D-Pad key DOWN, or PAGE DOWN). I am using xbindkeys to assign different shortcuts to the quick launch buttons, perhaps I could use the same program for the jog dial? I would have done that, except I do not know how to find the proper button/key assignment for xbindkeys to use. Thanks in advance!

  Read the article

• Windows 7 trying to turn off UAC every time Windows starts

  - by Mehper C. Palavuzlar

  I have strange problem on my HP laptop. This began to happen recently. Whenever I start my machine, Windows 7 Action Center displays the following warning: You need to restart your computer for UAC to be turned off. I never disable UAC, but obviously some process or virus (I'm not sure, only guessing) causes this. As soon as I get this warning, I head for the UAC settings, and re-enable UAC to dismiss this warning. This is a bothersome situation as I really don't know what causes the problem. I have run a full scan on the computer for any probable virus activity, but TrendMicro OfficeScan said that no viruses have been found. There are no other strange incidents on the machine. Everthing works fine except this bizarre incident. How can I learn what process is trying to turn off UAC? What way should I follow to overcome this problem?

  Read the article

• Capture RTSP stream from IP Camera and store

  - by Keerthi

  I've got a few IP Cameras which output an RTSP (h264 mpeg4) stream. Hitting the URL locally via VLC: rtsp://192.168.0.21:554/mpeg4 I can stream the camera and dump to disk (on my desktop). I'd like to however store these files on my NAS (FreeNAS). I was looking at ways to capture the RTSP stream and dump them to disk but I'm unable to find anything. Is it possible to capture the stream on FreeBSD or Linux (RaspberryPi) and dump the streamed content to a disk local to Linux or FreeBSD - preferably every 30minutes? EDIT: The NAS is headless (HP N55L or something) and the RaspberryPi's are headless too. I've already looked into ZoneMinder but need something small. I was hoping maybe using Motion to detect motion on the stream but that will come later.

  Read the article

• About the External Graphics Card and CPU usage

  - by Balaji

  Hi, We are Rendering 16 live Streams at our client machine through one of our applications and the resolution of the video streams are as 4CIF/MPEG4/25FPS/4000Kbits. The configuration fo the client machine is below. HP Desktop Machine: Microsoft Windows XP Intel (R) Core2 Duo CPU E8400 @ 3.00 GHz 2.99 GHz, 1.94 GB of RAM Intel (R) Q45/Q43 Series Express Chipset (Inbuild) The CPU usage of the machine peaks 99% for 16 straems. After some discussion, we had decided to install external graphics card to reduce the CPU usage. So that, we have tried following graphics cards. NVIDIA Quadro NVS 440 - 128 MB Radeon HD 4350 - 512 MB GDDR2 Redeon HD 4350 - 1GB DDR2 ASUS EAH 4350 Silent 1GB DDR2 But the performance wise no difference, even worst. So, what is the pupuse of these external graphics cards? Really it will reduce the CPU usage? What parameters have to check, if we want to reduce the CPU usage? Please do the needful as soon as possible. Regards Balaji

  Read the article

• Regarding the battery of a new laptop [closed]

  - by Majed

  Possible Duplicate: Is it better to use a laptop on battery or on AC power? I bought a new laptop from HP. I am not sure if I should remove the battery while I am working on my laptop or not. What is better for my laptop battery, to keep it while the laptop is plugged in or to remove it? or to charge it and then pull out the plug and when the battery is flat then plug it again? I use my laptop alot (at home and sometimes at work as well).

  Read the article

• How to get pen input to draw?

  - by Cameron J

  I just got a crappy little Hyundai pen input module To use on a normal Windows 7 HP laptop, it works quite well with the Hyundai software, but that's in Chinese, and the input only stays on the screen for a second. When I try to use it in Paint, it just draws a dot, and switches back to an unclicked state, similarly, it's impossible to move a window. Is there ant way I can keep the click held down when the pen is touching the pad in order to draw, or is there any third party software anyone knows of that can do this?

  Read the article

• Scripted printer configuration changes

  - by David Steven

  I've got about a dozen Windows XP machines that I need to make a couple specific printer configuration changes to. The printer is "virtual" printer for an electronic delivery service. I'd like to not have to visit each machine individually. I already have the means to execute commands remotely on the machines, I just can't seem to find away to adjust these settings via command line or script. Specifically I need to be able to make the following changes: 1) As an admin user: - Device Settings - Font Substitution Table/Courier New - Change to "Courier" 2) As a specific* user: - Printer Preferences - Paper/Quality - Advanced - Change Graphic/Print Quality to "600 x 600" - Change Document Options/Printer Features/Graphics Mode to "HP-GL/2" *This change is a per user configuration, unless there's some way to make it once. In this situation I only really need it for a specific (different) user on each machine.

  Read the article

• Increase performance of Samsung 830 256GB SSD

  - by Robert Koritnik

  I have a Samsung 830 SSD in my notebook connected to a SATA interface. This is a rather old HP notebook nc8430 which means SATA is SATA I and not II or even III that disk supports. But SATA I still supports speeds up to 150MB/s so I expected at least double values as per image below. CrystalDiskMark shows rather slow performance: I've been using this SSD for over a year now and I would like to know what to do to make it blazingly fast as other reports say it should be? Edit As suggested I'm adding AS SSD screenshot of the test. And Samsung Magician's benchmark which is likely biased...

  Read the article

• Is a ext3 Linux filesystem byte order independent

  - by Lothar

  I have a good old HP-C3700 Workstation with PA-RISC CPU here that I would like to use as a subversion server for a very large repository. I just worry what happens if the workstation dies (everybody who knows this computer knows that it is running like an Abrams tank and unlikely to happen in the next decade). I'm using Debian Linux on this system. If the mainboard dies can I just plug the SCSI drive into a PC and read the files from a normal Intel Linux PC? Which software RAID levels would be safe?

  Read the article

• Wake computer from sleep/standby without BIOS support for WOL?

  - by jjeaton

  Just bought a new home server and the nice folks at HP disabled the Wake-On-Lan feature in my motherboard. Are there any other options for waking the computer from Sleep/Standby mode? I'd like to take advantage of power savings wherever I can. I realize that I won't be able to wake it from shutdown, short of putting together some Rube Goldberg machine. EDIT: I'd like to be able to wake the machine on demand, remotely. So I can then RDP into it, or access files, etc.

  Read the article

• Seasgate GoFlex NAS + Horrible Speed = Bad Experience

  - by Jon H

  I am having issues with transfer speeds from my desktop PC to my NAS. I have my NAS hooked up to a Gigabit Gateway as well as my Desktop with Cat 5e. I see up to 4.0 MB/Second Transfer Rates, the normal is about 2.5 MB/Seconds. There is 3 Partitions on my NAS, Public, Private, Backup. When I transfer from Private to Public I see the speeds above. If its under the same partition almost instant. I was wondering if the speeds I am seeing is in due to my Computer or the NAS. I was looking into building my own Media Server in due to these horrible speeds. Is their anything I can do in the mean time to speed this up? Motherboard = M3970AM-HP (Angelica) Processor = AMD FX 6100 Ram = 10GB PC3-10600 MB/sec Hard Drive (1) = 1.5TB SATA 3.0GB 5400RPM Hard Drive (2) = 120GB SATA SSD NAS = Seagate 3TB Go Flex Home Connection (1) = 1000 Base T Connection (2) = Wireless N

  Read the article

• About the External Graphics Card and CPU usage

  - by Balaji

  We are Rendering 16 live Streams at our client machine through one of our applications and the resolution of the video streams are as 4CIF/MPEG4/25FPS/4000Kbits. The configuration of the client machine is below. HP Desktop Machine: Microsoft Windows XP Intel (R) Core2 Duo CPU E8400 @ 3.00 GHz 2.99 GHz, 1.94 GB of RAM Intel (R) Q45/Q43 Series Express Chipset (Inbuild) The CPU usage of the machine peaks 99% for 16 streams. After some discussion, we had decided to install external graphics card to reduce the CPU usage. So that, we have tried following graphics cards. NVIDIA Quadro NVS 440 - 128 MB Radeon HD 4350 - 512 MB GDDR2 Redeon HD 4350 - 1GB DDR2 ASUS EAH 4350 Silent 1GB DDR2 But the performance wise there has been no difference - even a drop in performance. So, what is the purpose of these external graphics cards? Really it will reduce the CPU usage? What parameters have to check, if we want to reduce the CPU usage?

  Read the article

• Map mouse xbuttons to keypress?

  - by Will

  Hi, the utilities that come with my HP vector mouse are fairly basic. My old logitech G9, the best mouse ever made (except when it gets senile and starts having 'gaps') had a utility to map each of the buttons to a keypress, which I use in games, such as xbutton1 and 2 for run, etc. is there a utility, or a way, that I can map the 2 xbuttons on my new mouse so that they generate/simulate a keypress? I'm wondering if there are built in mappings in Windows that do this already, and its just a case of finding out what the keypresses are? thanks, Will

  Read the article

• Optimal Configuration for five 300 GB 15K SAS Drives

  - by Bob

  I recently acquired an HP Z800 workstation that has five 300 GB 15K SAS Drives. This system will be dedicated to running multiple virtual machines under VMware Workstation (Note: I'm not using ESXi because I do plan to use the system for other purposes.). For the host OS, I plan to install RHEL 5. My number one concern is guest performance. For example, should I create a RAID 10 array for the OS and virtual machine storage with four of the drives and reserve the 5th? Or, is there a solution that will provide better performance?

  Read the article

< Previous Page | 70 71 72 73 74 75 76 77 78 79 80 81  | Next Page >