ip aliasing - Page 72 - Developer IT

Cisco Pix 501 - reaching local host limit, showing odd IP addresses

- by cdonner

I am running out of licenses on my Pix 501, and the show local-host command lists a number of odd IP addresses that do not belong to my 10.10.1.* subnet. Any idea what they are? The only thing I could find was a potential ISP: DINSA is Defence Interoperable Network Services Authority, an agency of the Ministry of Defence of the United Kingdom. Does not sound right. I don't see any active connections, though. I can't ping or traceroute these IPs, but they reappear after I clear the list, with various other addresses in that general range, up until the connection limit is reached. Based on the number denied, I suppose I would have a lot more of them had I not the connection limit. Very dubious. Is anybody else seeing this? pixfirewall# show local-host Interface inside: 10 active, 10 maximum active, **118 denied** local host: <10.10.1.110>, TCP connection count/limit = 0/unlimited TCP embryonic count = 0 TCP intercept watermark = unlimited UDP connection count/limit = 0/unlimited AAA: Xlate(s): Conn(s): local host: <10.10.1.176>, TCP connection count/limit = 0/unlimited TCP embryonic count = 0 TCP intercept watermark = unlimited UDP connection count/limit = 0/unlimited AAA: Xlate(s): Conn(s): local host: <10.10.1.170>, TCP connection count/limit = 0/unlimited TCP embryonic count = 0 TCP intercept watermark = unlimited UDP connection count/limit = 1/unlimited AAA: Xlate(s): Conn(s): local host: <10.10.1.175>, TCP connection count/limit = 11/unlimited TCP embryonic count = 0 TCP intercept watermark = unlimited UDP connection count/limit = 1/unlimited AAA: Xlate(s): Conn(s): local host: <10.10.1.108>, TCP connection count/limit = 0/unlimited TCP embryonic count = 0 TCP intercept watermark = unlimited UDP connection count/limit = 0/unlimited AAA: Xlate(s): Conn(s): local host: <25.33.41.115>, // ???????????????? what is this? TCP connection count/limit = 0/unlimited TCP embryonic count = 0 TCP intercept watermark = unlimited UDP connection count/limit = 0/unlimited AAA: Xlate(s): Conn(s): local host: <25.33.226.124>, // ???????????????? what is this? TCP connection count/limit = 0/unlimited TCP embryonic count = 0 TCP intercept watermark = unlimited UDP connection count/limit = 0/unlimited AAA: Xlate(s): Conn(s): local host: <10.10.1.172>, TCP connection count/limit = 0/unlimited TCP embryonic count = 0 TCP intercept watermark = unlimited UDP connection count/limit = 0/unlimited AAA: Xlate(s): Conn(s): local host: <25.36.114.91>, // ???????????????? what is this? TCP connection count/limit = 0/unlimited TCP embryonic count = 0 TCP intercept watermark = unlimited UDP connection count/limit = 0/unlimited AAA: Xlate(s): Conn(s): local host: <10.10.1.109>, TCP connection count/limit = 0/unlimited TCP embryonic count = 0 TCP intercept watermark = unlimited UDP connection count/limit = 0/unlimited AAA: Xlate(s): Conn(s): pixfirewall#

Read the article

Two network adapters on Ubuntu Server 9.10 - Can't have both working at once?

- by Rob

I'm trying to set up two network adapters in Ubuntu (server edition) 9.10. One for the public internet, the other a private LAN. During the install, I was asked to pick a primary network adapter (eth0 or eth1). I chose eth0, gave the installer the details listed below in the contents of /etc/network/interfaces, and carried on. I've been using this adapter with these setting for the last few days, and every thing's been fine. Today, I decide it's time to set up the local adapter. I edit the /etc/network/interfaces to add the details for eth1 (see below), and restart networking with sudo /etc/init.d/networking restart. After this, attempting to ping the machine using it's external IP address fails, but I can ping it's local IP address. If I bring eth1 down using sudo ifdown eth1, I can successfully ping the machine via it's external IP address again (but obviously not it's internal IP address). Bringing eth1 back up returns us to the original problem state: external IP not working, internal IP working. Here's my /etc/network/interfaces (I've removed the external IP information, but these settings are unchanged from when it worked) rob@rhea:~$ cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary (public) network interface auto eth0 iface eth0 inet static address xxx.xxx.xxx.xxx netmask xxx.xxx.xxx.xxx network xxx.xxx.xxx.xxx broadcast xxx.xxx.xxx.xxx gateway xxx.xxx.xxx.xxx # The secondary (private) network interface auto eth1 iface eth1 inet static address 192.168.99.4 netmask 255.255.255.0 network 192.168.99.0 broadcast 192.168.99.255 gateway 192.168.99.254 I then do this: rob@rhea:~$ sudo /etc/init.d/networking restart * Reconfiguring network interfaces... [ OK ] rob@rhea:~$ sudo ifup eth0 ifup: interface eth0 already configured rob@rhea:~$ sudo ifup eth1 ifup: interface eth1 already configured Then, from another machine: C:\Documents and Settings\Rob>ping [external ip] Pinging [external ip] with 32 bytes of data: Request timed out. Request timed out. Request timed out. Request timed out. Ping statistics for [external ip]: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), Back on the Ubuntu server in question: rob@rhea:~$ sudo ifdown eth1 ... and again on the other machine: C:\Documents and Settings\Rob>ping [external ip] Pinging [external ip] with 32 bytes of data: Reply from [external ip]: bytes=32 time<1ms TTL=63 Reply from [external ip]: bytes=32 time<1ms TTL=63 Reply from [external ip]: bytes=32 time<1ms TTL=63 Reply from [external ip]: bytes=32 time<1ms TTL=63 Ping statistics for [external ip]: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms So... what am I doing wrong?

Read the article

Certain clients (IP range) can not ping server

- by Logman

I just virtualized a Windows 2003 Server SP2 x32. The server contained our help desk server (Spiceworks) and our anti virus management server (ESET RAC). The host computer actually contained the virtualized server originally; I created the vhd and then I wiped this system clean and installed Windows 2008 R2 x64 Datacenter and added the virtualized 2003 onto the Hyper-V 2008 R2 Server. I got the server running fine except for... certain ip ranges. Local clients can get updates from the AV server from my 192.168.180.xxx & 192.168.181.xxx BUT NOT from any 192.168.182.xxx, 192.168.183.xxx, 192.168.184.xxx etc... I can not ping the server from any clients except for the 180. & 181. ranges. Now I created 2 other virtualized servers (win2008 & a win7 pro) and they exist on the same virtual host as the 2003 server. And at first I could not ping those until I went to the "\Network and Sharing Center\Advanced sharing settings" and Turned On File and Print Sharing. Then I could ping and access those virtualized guests. Win2003 server isn't quite the same. But I am sure I have it on. But now when I ping from a client on one of those ranges that would not work I get this: As you can see the ping leaves our network. We have 2 ad/dns servers (one 180. & the other in the 181. range). Is it DNS? Both AD/DNS servers are Windows 2003. And we plan on upgrading both to 2008 R2 within a month or two but I need to fix this issue pronto (esp the AV end). btw, I did rename that 2003 Server (Spiceworks/AV) hostname. And I tried a CNAME. But I do not think that is the problem. EDIT: OR because this server existed on this hardware/computer before becoming virtualized?

Read the article

how to rotate one squid user among multiple IPs based on number of requests processed by each IP

- by Arvind

I want to set up a Squid ACL in the following manner-- For example, my Squid Proxy Server has 10 IP addresses- now I have a user 'demouser'. I want that for the very first request sent to 'demouser' this user uses IP address #1, for the second request it uses IP address #2, for the 3rd request of the day it uses IP address #3 and so on till it uses up all IPs. One more level of control I would like is that once the user has used up all available IP addresses once per address, then it does not allow the proxy request to go through. How do I set up such a configuration on Squid Proxy server ACL? Even a document or how to would be very helpful. The official wiki talks about one 'weird' case- choosing an IP address based on time of day the request was made to the proxy server. The other cases are all regular use cases which are not even remotely near my requirement as specified above.

Read the article

CentOS 5.8 dig is not resolving ip-address

- by travisbotello

I'm running centos 5.8 on a local machine at home. Today I was trying to analyze the DNS-Lookup via dig. $ dig +trace -t A www.heise.de. This is giving me something like this as a response de. 172800 IN NS f.nic.de. de. 172800 IN NS z.nic.de. de. 172800 IN NS s.de.net. de. 172800 IN NS n.de.net. de. 172800 IN NS a.nic.de. de. 172800 IN NS l.de.net. ;; Received 344 bytes from 192.58.128.30#53(192.58.128.30) in 49 ms In contrast my dedicated CentOS machine is returning the following de. 172800 IN NS a.nic.de. de. 172800 IN NS n.de.net. de. 172800 IN NS f.nic.de. de. 172800 IN NS z.nic.de. de. 172800 IN NS l.de.net. de. 172800 IN NS s.de.net. ;; Received 344 bytes from 192.58.128.30#53(j.root-servers.net) in 32 ms As you can see, the last line is different. Any idea why my dedicated machine is giving me the host name of the responding DNS-Server and my local machine is only returning the ip-address? Thanks in advance UPDATE The reverse DNS-Lookup is working without any problems. Also, I just checked this on my local mac and...exactly the same problem occurs. Is it possible that this has to do with the local router/modem/ISP?

Read the article

Windows DHCP Server - get notification when a non-AD joined device gets an IP address

- by TheCleaner

SCENARIO To simplify this down to it's easiest example: I have a Windows 2008 R2 standard DC with the DHCP server role. It hands out IPs via various IPv4 scopes, no problem there. WHAT I'D LIKE I would like a way to create a notification/eventlog entry/similar whenever a device gets a DHCP address lease and that device IS NOT a domain joined computer in Active Directory. It doesn't matter to me whether it is custom Powershell, etc. Bottom line = I'd like a way to know when non-domain devices are on the network without using 802.1X at the moment. I know this won't account for static IP devices. I do have monitoring software that will scan the network and find devices, but it isn't quite this granular in detail. RESEARCH DONE/OPTIONS CONSIDERED I don't see any such possibilities with the built in logging. Yes, I'm aware of 802.1X and have the ability to implement it long-term at this location but we are some time away from a project like that, and while that would solve network authentication issues, this is still helpful to me outside of 802.1X goals. I've looked around for some script bits, etc. that might prove useful but the things I'm finding lead me to believe that my google-fu is failing me at the moment. I believe the below logic is sound (assuming there isn't some existing solution): Device receives DHCP address Event log entry is recorded (event ID 10 in the DHCP audit log should work (since a new lease is what I'd be most interested in, not renewals): http://technet.microsoft.com/en-us/library/dd759178.aspx) At this point a script of some kind would probably have to take over for the remaining "STEPS" below. Somehow query this DHCP log for these event ID 10's (I would love push, but I'm guessing pull is the only recourse here) Parse the query for the name of the device being assigned the new lease Query AD for the device's name IF not found in AD, send a notification email If anyone has any ideas on how to properly do this, I'd really appreciate it. I'm not looking for a "gimme the codez" but would love to know if there are alternatives to the above list or if I'm not thinking clear and another method exists for gathering this information. If you have code snippets/PS commands you'd like to share to help accomplish this, all the better.

Read the article

How to force Windows 7 to ask for a "fresh" IP address from DHCP server?

- by haimg

I'm troubleshooting a certain issue with my DHCP configuration, and need my Windows machine to ask for a "fresh" IP address, so I can see which address DHCP server gives by default. When I do ipconfig /release followed by ipconfig /renew, Windows "proposes" its old IP address to the DHCP server (just checked with Wireshark, initial "DHCP Discover" message has Option-50 (requested IP address) with Windows machine's old IP). Tried disabling/enabling network adapter. Same behavior. Question: How can I force Windows to just ask for a new IP address, without proposing its old IP address.

Read the article

Get the MAC addresses of all the machines connected to a LAN when NO machines have got an IP address yet

- by JtheRocker

Here is the real scenario. I have say 4 machines not having any IP address yet connected to a switch. In one of the machines (OS=CentOS), I would install a DHCP server and would provide the other machines IP addresses. Prior to assigning them IP addresses, I need to get the MAC address of each of the machines that I would assign IP addresses to. So, my question here is how to I get the MAC addresses of all the machines connected to a switch when NO machine has got any IP address yet? It's mandatory for my use case that I won't be having any IP addresses before the MAC addresses. -Thanks

Read the article

Delphi hook to redirect to different ip

- by Chris

What is the best way to redirect ANY browser to a different ip for specific sites? For example if the user will type www.facebook.com in any browser he will be redirected to 127.0.0.1. Also the same should happen if he will type 66.220.146.11. What I have until now is this: using the winpkfilter I am able to intercept all the traffic on port 80, with type(in or out), source ip, destination ip and packet. My problem is to modify somehow the packet so the browser will be redirected. This is the code that i have right now: program Pass; {$APPTYPE CONSOLE} uses SysUtils, Windows, Winsock, winpkf, iphlp; var iIndex, counter : DWORD; hFilt : THANDLE; Adapts : TCP_AdapterList; AdapterMode : ADAPTER_MODE; Buffer, ParsedBuffer : INTERMEDIATE_BUFFER; ReadRequest : ETH_REQUEST; hEvent : THANDLE; hAdapter : THANDLE; pEtherHeader : TEtherHeaderPtr; pIPHeader : TIPHeaderPtr; pTcpHeader : TTCPHeaderPtr; pUdpHeader : TUDPHeaderPtr; SourceIP, DestIP : TInAddr; thePacket : PChar; f : TextFile; SourceIpString, DestinationIpString : string; SourceName, DestinationName : string; function IPAddrToName(IPAddr : string) : string; var SockAddrIn : TSockAddrIn; HostEnt : PHostEnt; WSAData : TWSAData; begin WSAStartup($101, WSAData); SockAddrIn.sin_addr.s_addr := inet_addr(PChar(IPAddr)); HostEnt := gethostbyaddr(@SockAddrIn.sin_addr.S_addr, 4, AF_INET); if HostEnt < nil then begin result := StrPas(Hostent^.h_name) end else begin result := ''; end; end; procedure ReleaseInterface(); begin // Restore default mode AdapterMode.dwFlags := 0; AdapterMode.hAdapterHandle := hAdapter; SetAdapterMode(hFilt, @AdapterMode); // Set NULL event to release previously set event object SetPacketEvent(hFilt, hAdapter, 0); // Close Event if hEvent < 0 then CloseHandle(hEvent); // Close driver object CloseFilterDriver(hFilt); // Release NDISAPI FreeNDISAPI(); end; begin // Check the number of parameters if ParamCount() < 2 then begin Writeln('Command line syntax:'); Writeln(' PassThru.exe index num'); Writeln(' index - network interface index.'); Writeln(' num - number or packets to filter'); Writeln('You can use ListAdapters to determine correct index.'); Exit; end; // Initialize NDISAPI InitNDISAPI(); // Create driver object hFilt := OpenFilterDriver('NDISRD'); if IsDriverLoaded(hFilt) then begin // Get parameters from command line iIndex := StrToInt(ParamStr(1)); counter := StrToInt(ParamStr(2)); // Set exit procedure ExitProcessProc := ReleaseInterface; // Get TCP/IP bound interfaces GetTcpipBoundAdaptersInfo(hFilt, @Adapts); // Check paramer values if iIndex > Adapts.m_nAdapterCount then begin Writeln('There is no network interface with such index on this system.'); Exit; end; hAdapter := Adapts.m_nAdapterHandle[iIndex]; AdapterMode.dwFlags := MSTCP_FLAG_SENT_TUNNEL or MSTCP_FLAG_RECV_TUNNEL; AdapterMode.hAdapterHandle := hAdapter; // Create notification event hEvent := CreateEvent(nil, TRUE, FALSE, nil); if hEvent <> 0 then if SetPacketEvent(hFilt, hAdapter, hEvent) <> 0 then begin // Initialize request ReadRequest.EthPacket.Buffer := @Buffer; ReadRequest.hAdapterHandle := hAdapter; SetAdapterMode(hFilt, @AdapterMode); counter := 0; //while counter <> 0 do while true do begin WaitForSingleObject(hEvent, INFINITE); while ReadPacket(hFilt, @ReadRequest) <> 0 do begin //dec(counter); pEtherHeader := TEtherHeaderPtr(@Buffer.m_IBuffer); if ntohs(pEtherHeader.h_proto) = ETH_P_IP then begin pIPHeader := TIPHeaderPtr(Integer(pEtherHeader) + SizeOf(TEtherHeader)); SourceIP.S_addr := pIPHeader.SourceIp; DestIP.S_addr := pIPHeader.DestIp; if pIPHeader.Protocol = IPPROTO_TCP then begin pTcpHeader := TTCPHeaderPtr(Integer(pIPHeader) + (pIPHeader.VerLen and $F) * 4); if (pTcpHeader.SourcePort = htons(80)) or (pTcpHeader.DestPort = htons(80)) then begin inc(counter); if Buffer.m_dwDeviceFlags = PACKET_FLAG_ON_SEND then Writeln(counter, ') - MSTCP --> Interface') else Writeln(counter, ') - Interface --> MSTCP'); Writeln(' Packet size = ', Buffer.m_Length); Writeln(Format(' IP %.3u.%.3u.%.3u.%.3u --> %.3u.%.3u.%.3u.%.3u PROTOCOL: %u', [byte(SourceIP.S_un_b.s_b1), byte(SourceIP.S_un_b.s_b2), byte(SourceIP.S_un_b.s_b3), byte(SourceIP.S_un_b.s_b4), byte(DestIP.S_un_b.s_b1), byte(DestIP.S_un_b.s_b2), byte(DestIP.S_un_b.s_b3), byte(DestIP.S_un_b.s_b4), byte(pIPHeader.Protocol)] )); Writeln(Format(' TCP SRC PORT: %d DST PORT: %d', [ntohs(pTcpHeader.SourcePort), ntohs(pTcpHeader.DestPort)])); //get the data thePacket := pchar(pEtherHeader) + (sizeof(TEtherHeaderPtr) + pIpHeader.VerLen * 4 + pTcpHeader.Offset * 4); { SourceIpString := IntToStr(byte(SourceIP.S_un_b.s_b1)) + '.' + IntToStr(byte(SourceIP.S_un_b.s_b2)) + '.' + IntToStr(byte(SourceIP.S_un_b.s_b3)) + '.' + IntToStr(byte(SourceIP.S_un_b.s_b4)); DestinationIpString := IntToStr(byte(DestIP.S_un_b.s_b1)) + '.' + IntToStr(byte(DestIP.S_un_b.s_b2)) + '.' + IntToStr(byte(DestIP.S_un_b.s_b3)) + '.' + IntToStr(byte(DestIP.S_un_b.s_b4)); } end; end; end; // if ntohs(pEtherHeader.h_proto) = ETH_P_RARP then // Writeln(' Reverse Addr Res packet'); // if ntohs(pEtherHeader.h_proto) = ETH_P_ARP then // Writeln(' Address Resolution packet'); //Writeln('__'); if Buffer.m_dwDeviceFlags = PACKET_FLAG_ON_SEND then // Place packet on the network interface SendPacketToAdapter(hFilt, @ReadRequest) else // Indicate packet to MSTCP SendPacketToMstcp(hFilt, @ReadRequest); { if counter = 0 then begin Writeln('Filtering complete'); readln; break; end; } end; ResetEvent(hEvent); end; end; end; end.

Read the article

WIN32_NetworkAdapterConfiguration does not report IP from PPP adapter

- by Michael

On a Windows 7 device, the following WMI query does not report back an enabled PPP adapter: Select Index,MACAddress,IPAddress,IPSubnet,DefaultIPGateway,DNSServerSearchOrder from Win32_NetworkAdapterConfiguration where IPEnabled=true Where ipconfig gives you all the information correctly: Windows IP Configuration PPP adapter XYZ VPN: Connection-specific DNS Suffix . : IPv4 Address. . . . . . . . . . . : 123.456.789.123 Subnet Mask . . . . . . . . . . . : 255.255.255.255 Default Gateway . . . . . . . . . : 0.0.0.0 Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : IPv4 Address. . . . . . . . . . . : 192.168.178.11 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.178.1 Ethernet adapter Local Area Connection 3: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Any ideas how I can script this by using WMI or VBS?

Read the article

IP Micro-outages, telephone micro-outages, and CATV micro-outages

- by Michael Graff

This is a long and complicated question, mostly because it has been going on for 2.5 years without a solution in sight. It also is only one-third computer related, the other two-thirds are cable TV and cable-phone related. Background I have COX Communications for a cable provider, and we get Internet, digital cable TV, and digital phone service through them. The Internet is a SB5101 right now, and has been a DPC2100 and SB5120 in the past. Same results. The phone service is provided through a telephone interface mounted on the outside of the house (not classic VoIP) and the CATV is through a Scientific Atlanta receiver without DVR. I do have a TiVo connected to the CATV box. Symptoms The CATV shows "blocking" -- sometimes very very short duration where a few blocks appear on the screen. Sometimes it lasts long enough that the video "pauses" for 2-5 seconds, and rarely but not unseen the audio also fails. The CATV decoder box shows no correctable (FEC) or uncorrectable errors. That is, all BER counters are zero for the video stream. The Internet shows "micro-outages" where it appears that sent packets are not making it out, but I continue to receive packets from local modems. That is, pings stop coming back, but I continue to see modems broadcast for DHCP, and sometimes they ask more than once. The cable modem shows no errors during this time, but cable modems lie like you would not believe. It is actually possible to unplug the coax from the modem for 20 seconds and it reports NO ERRORS to the provider's tools. The phone service cuts out for 1-3 seconds, infrequently. When this happens, I hear NOTHING (not even comfort noise) and the remote side hears a "click" as if I were getting a call waiting message. However, there is no call incoming, other than the one I'm currently on of course. Things SEEM to happen more frequently when the temperature outside swings from cold to warm, so fall/spring seems worse than summer/winter. All micro-outages occur between once or twice a day (which I could ignore) to 10 times per hour. All SNR, signal levels, noise levels, etc. show very close to optimal when measured. COX's diagnosis This is a continual pain for me. Over the last 2.5 years, they have opened, "fixed" something, and closed the tickets. They close it without confirming that it is indeed better, and when I reopen they cannot do that, but instead they open a new ticket and send yet another low-level tech out to do the same signal tests and report that all is OK. I've finally gotten a line tech who has a clue and is motivated enough to pursue this with me. We have tried things like switching the local nodes over to UPS and generator power, but this does not trigger the noise. We have tried replacing all cabling, the tap outside my house, the modem, the CATV decoder -- all without resolution. Recently they have decided it is both my computer or switch, my TiVo, and my phone that are all broken and causing this issue. My debugging steps I spent the worse day of my TV-watching life yesterday and part of today. I watched live TV without the TiVo. I witnessed blocking, but it did "feel different." and was actually more severe. Some days it is better, some days it is worse, so perhaps this was just a very bad day. Today, I connected the TiVo to my DVD player, and ran two very long movies through it. I saw no blocking at all during nearly 6 hours of video. Suggestions? Does anyone have any suggestions on what to do next? I understand perhaps only the IP side can be addressed here, but it is one of the more limiting debugging options.

Read the article

Possible to give one connection to each IP?

- by Alice

I am having overloading problems. Too many connections, and some IP has more than 20 connection at once. I do this command. netstat -anp |grep 'tcp\|udp' | awk '{print $5}' | cut -d: -f1 | sort | uniq -c | sort -n To get total of connection and this is the output: 1 106.3.98.81 1 106.3.98.82 1 108.171.251.2 1 110.85.103.207 1 111.161.30.217 1 113.53.103.55 1 119.235.237.20 1 124.106.19.34 1 157.55.32.166 1 157.55.33.49 1 157.55.34.28 1 175.141.103.239 1 180.76.5.59 1 180.76.5.61 1 188.235.165.216 1 205.213.195.70 1 216.157.222.25 1 218.93.205.100 1 222.77.209.105 1 27.153.148.109 1 27.159.194.242 1 27.159.253.71 1 54.242.122.201 1 61.172.50.99 1 65.55.24.239 1 71.179.78.5 1 74.125.136.27 1 74.125.182.30 1 74.125.182.36 1 79.112.225.39 1 93.190.139.208 2 124.227.191.67 2 157.55.33.84 2 157.55.35.34 2 190.66.3.107 2 203.87.153.38 2 220.161.119.3 2 221.6.15.156 2 27.153.148.116 2 27.159.197.0 2 96.47.224.42 3 202.14.70.1 3 218.6.15.42 3 222.77.218.226 3 222.77.224.187 3 37.59.66.100 3 46.4.181.244 3 87.98.254.192 3 91.207.8.62 4 188.143.233.222 4 218.108.168.166 4 221.12.154.18 4 93.182.157.8 4 94.142.128.183 5 180.246.170.187 5 8.21.6.226 6 178.137.94.87 6 218.93.205.112 7 199.15.234.222 9 9 125.253.97.6 10 178.137.17.196 11 46.118.192.179 12 212.79.14.14 21 72.201.187.135 27 0.0.0.0 Can anyone give me some directions, my server crashed few times this week because of this. Thanks. EDIT: Alright, my error logs says: [Thu Oct 18 12:17:39 2012] [error] could not make child process 4842 exit, attempting to continue anyway [Thu Oct 18 12:17:39 2012] [error] could not make child process 4843 exit, attempting to continue anyway [Thu Oct 18 12:17:39 2012] [error] could not make child process 4855 exit, attempting to continue anyway [Thu Oct 18 12:17:39 2012] [error] could not make child process 4856 exit, attempting to continue anyway [Thu Oct 18 12:17:39 2012] [error] could not make child process 4861 exit, attempting to continue anyway [Thu Oct 18 12:17:39 2012] [error] could not make child process 4869 exit, attempting to continue anyway [Thu Oct 18 12:17:39 2012] [error] could not make child process 4872 exit, attempting to continue anyway [Thu Oct 18 12:17:39 2012] [error] could not make child process 4873 exit, attempting to continue anyway [Thu Oct 18 12:17:39 2012] [error] could not make child process 4874 exit, attempting to continue anyway [Thu Oct 18 12:17:39 2012] [error] could not make child process 4875 exit, attempting to continue anyway [Thu Oct 18 12:17:39 2012] [error] could not make child process 4876 exit, attempting to continue anyway [Thu Oct 18 12:17:39 2012] [error] could not make child process 4880 exit, attempting to continue anyway [Thu Oct 18 12:17:39 2012] [error] could not make child process 4882 exit, attempting to continue anyway [Thu Oct 18 12:17:39 2012] [error] could not make child process 4885 exit, attempting to continue anyway [Thu Oct 18 12:17:39 2012] [error] could not make child process 4897 exit, attempting to continue anyway [Thu Oct 18 12:17:39 2012] [error] could not make child process 4900 exit, attempting to continue anyway [Thu Oct 18 12:17:39 2012] [error] could not make child process 4901 exit, attempting to continue anyway [Thu Oct 18 12:17:39 2012] [error] could not make child process 4906 exit, attempting to continue anyway [Thu Oct 18 12:17:39 2012] [error] could not make child process 4907 exit, attempting to continue anyway [Thu Oct 18 12:17:39 2012] [error] could not make child process 4925 exit, attempting to continue anyway [Thu Oct 18 12:17:39 2012] [error] could not make child process 4926 exit, attempting to continue anyway [Thu Oct 18 12:17:39 2012] [error] could not make child process 4927 exit, attempting to continue anyway [Thu Oct 18 12:17:39 2012] [error] could not make child process 4931 exit, attempting to continue anyway [Thu Oct 18 12:17:40 2012] [notice] caught SIGTERM, shutting down PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php5/20060613+lfs/curl.iso' - /usr/lib/php5/20060613+lfs/curl.iso: cannot open shared object file: No such file or directory in Unknown on line 0 [Thu Oct 18 12:17:45 2012] [notice] Apache/2.2.9 (Debian) PHP/5.2.6-1+lenny10 with Suhosin-Patch configured -- resuming normal operations And I have over thousands of line saying:(each has different process id) [Thu Oct 18 12:17:38 2012] [error] child process 4906 still did not exit, sending a SIGKILL And I also have line saying: [Wed Oct 17 09:44:58 2012] [error] server reached MaxClients setting, consider raising the MaxClients setting <IfModule prefork.c> StartServers 8 MinSpareServers 5 MaxSpareServers 50 MaxClients 300 MaxRequestsPerChild 5000 </IfModule>

Read the article

How to get http requests details in a tcpdump?

- by tucson

I am trying to get a tcpdump trace of some http requests. Here is what I got so far (I replaced the real IP addresses with REMOTE and LOCAL): C:\>Windump -na -i 3 ip host REMOTE and ip src LOCAL and tcp port 80 Windump: listening on \Device\NPF_{8056BE5E-BDBB-44E6-B492-9274B410AD66} 13:13:34.985460 IP LOCAL.4261 > REMOTE.80: . 1784894764:1784894765(1) ack 1268208398 win 65535 13:13:38.589175 IP LOCAL.4302 > REMOTE.80: F 3708464308:3708464308(0) ack 982485614 win 65535 13:13:38.589285 IP LOCAL.4303 > REMOTE.80: F 890175362:890175362(0) ack 2462862919 win 65535 13:13:38.589330 IP LOCAL.4304 > REMOTE.80: F 1838079178:1838079178(0) ack 156173959 win 65535 13:13:38.589374 IP LOCAL.4305 > REMOTE.80: F 3952718843:3952718843(0) ack 2209231545 win 65535 13:13:38.589413 IP LOCAL.4306 > REMOTE.80: F 446105750:446105750(0) ack 3141849979 win 65535 13:13:38.590265 IP LOCAL.4302 > REMOTE.80: . ack 2 win 65535 13:13:38.590403 IP LOCAL.4304 > REMOTE.80: . ack 2 win 65535 13:13:38.590429 IP LOCAL.4303 > REMOTE.80: . ack 2 win 65535 13:13:38.590484 IP LOCAL.4305 > REMOTE.80: . ack 2 win 65535 13:13:38.590514 IP LOCAL.4306 > REMOTE.80: . ack 2 win 65535 But I do not get the following level of details: Request URL:http://domain.com/index.php Request Method:POST Status Code:200 OK POST /index.php HTTP/1.1 Host: domain.com Connection: keep-alive Content-Length: 151 Cache-Control: max-age=0 etc How can I get this level of data?

Read the article

Obtaining IP addresses in Bittorrent

- by Legend

I am trying to get a list of IP addresses serving or downloading a file. What I did was to contact a tracker like openbittorrent.com to get the following (as part of the scrape file): B%00%00%0C%5F%B1%B1l%CAGa%84S%CB%B0%9BG%84%3BE:0:1 Now, the long string in the beginning is the info hash. As a next step, I did this: http://tracker.sometracker.com/announce?info_hash=B%00%00%0C%5F%B1%B1l%CAGa%84S%CB%B0%9BG%84%3BE It gave me back the following. So far so good. The message contained this: d8:completei0e10:downloadedi0e10:incompletei2e8:intervali1931e12:min intervali965e5:peers12:U????????^@^@e Can someone tell me what should I be doing after this to get the IP addresses currently serving the file or downloading it?

Read the article

Ip address of the client machine

- by Zerotoinfinite

Hi, Please let me know how to get the client IP address, I have tried all of the below things , but I am getting the same output 127.0.0.1 string strClientIP; strClientIP = Request.UserHostAddress.ToString(); string strHostName = System.Net.Dns.GetHostName(); string clientIPAddress = System.Net.Dns.GetHostAddresses(strHostName).GetValue(0).ToString(); string ipaddress = string.Empty ; ipaddress = Request.ServerVariables["HTTP_X_FORWARDED_FOR"]; if (ipaddress == "" || ipaddress == null) ipaddress = Request.ServerVariables["REMOTE_ADDR"]; Please tel me how can I get the correct IP !

Read the article

How does the same origin policy apply to IP addresses

- by recipriversexclusion

I have a server on our company intranet that runs JBoss. I want to send API calls to this server from my machine, also on the intranet, and get the resulting XML responses using JQuery. I read the entry on Wikipedia but am confused how that applies to my situation, since our machines only have IP addresses, not domain names. I have server URL: 10.2.200.3:8001/serviceroot/service client IP address: 10.2.201.217 My questions are: As far as I understand these are different domains, right? So I have to use a proxy to issue JQuery.ajax calls to the server If I want to avoid doing (2), can I install Apache on the server and server the page with JS code form there? But then the JS will be from 10.2.200.3 and the server is at 10.2.200.3:8001. Aren't these considered different domains according to policy? Thanks!

Read the article

cannot get ip address on a virtual machine

- by user175084

so i have a code which gets me the ip address of a machine i am wroking on. so if my gui is published on the server and i access it from my local machine it gives me tha address of my local machine and when i access the gui from the server itself it gives me the server address.. which is fine. But when i put the gui on a VM server and run it from a VM server itself i dont get the ip address. this works fine if i access it from another machine but does not work only when accesing gui on VM server.. please help me out as i get this value ":::1" here is my code: string ipaddress; //string ipaddress = Request.ServerVariables["LOCAL_ADDR"]; string ipaddress = Request.ServerVariables["HTTP_X_FORWARDED_FOR"]; if (ipaddress == "" || ipaddress == null) string ipaddress = Request.ServerVariables["REMOTE_ADDR"]; Label5.Text = ipaddress; thank you

Read the article

Get country location of an IP with native PHP

- by Mint

Read on before you say this is a duplicate, it's not. (as far as I could see) I want to get the county code in php from the client. Yes I know you can do this using external sites or with the likes of "geoip_record_by_name" but I don't want to be dependent on an external site, and I can't install "pear" for php as im using shard Dreamhost hosting. I thought I could just do something like this: $output = shell_exec('whois '.$ip.' -H | grep country | awk \'{print $2}\''); echo "<pre>$output</pre>"; But dreamhost seems to have an old version of whois (4.7.5), so I get this error on allot of IPs: Unknown AS number or IP network. Please upgrade this program. So unless someone knows how to get a binary of a newer version of whois onto dreamhost im stuck. Or is there another way I could get the country code from the client who is loading the page?

Read the article

Voice Communication over TCP/IP

- by Micha

Hello, I'm currently developing application using DirectSound for communication on an intranet. I've had working solution using UDP but then my boss told me he wants to use TCP/IP for some reason. I've tried to implement it in pretty much the same way as UDP, but with very little success. What I get is basically just noise. 20% of it is the recorded sound and the rest is just weird noise. My guess for the reason is that TCP needs to read all the accepted data several times until it gets the final sound I can play. Now two questions: Am I on the right tracks? Is it even good idea to use TCP/IP for this kind of application (voice conferencing of sorts)? I'm doing it in C# but I don't think this is language specific.

Read the article

IP Address vs Mac addresses

- by Codenotguru

why do we need ip addresses if mac address is enough to identify the machine???

Read the article

get server ip in java (Struts)

- by Mercer

hello, i want to get ip server where my tomcat is execute in java (Struts).?

Read the article

IP address in Silverlight

- by Usman Masood

Is there a way to get the IP address of a client in Silverlight if my Silverlight control is hosted in HTML?

Read the article

client ip address

- by jammkie same

How to get client ip address in asp.net.

Read the article

cannot access localhost using ip

- by Robert

I have done a small web development project using eclipse. It runs well when I try running it on browser with url localhost:8080/myproject/home.html. But if I want to access it on another machine (laptop, mobile, etc. using the same wifi) it is not possible; it is not able to connect. After Googling for a while found out that I have to use the IP address instead of 'localhost'. So I tried 10.0.0.4:8080/myproject/home.html, but still does not work. In fact i am unable to open that url on the same machine (where localhost:8080/myproject/home.html works fine). I also added a new Inbound rule in control panel firewall settings, allowing access to all ports for protocol TCP. Still have problem in running application with the url 10.0.0.4:8080/myproject/home.html (both on same machine as well as laptop and mobile). FYI i am using Eclipse Indigo, Apache tomcat 6.0 and server.xml file contents is as below: <?xml version="1.0" encoding="UTF-8"?> <Server port="8005" shutdown="SHUTDOWN">  <Listener SSLEngine="on" className="org.apache.catalina.core.AprLifecycleListener"/>  <Listener className="org.apache.catalina.core.JasperListener"/>  <Listener className="org.apache.catalina.core.JreMemoryLeakPreventionListener"/>  <Listener className="org.apache.catalina.mbeans.ServerLifecycleListener"/> <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener"/>  <GlobalNamingResources>  <Resource auth="Container" description="User database that can be updated and saved" factory="org.apache.catalina.users.MemoryUserDatabaseFactory" name="UserDatabase" pathname="conf/tomcat-users.xml" type="org.apache.catalina.UserDatabase"/> </GlobalNamingResources>  <Service name="Catalina">    <Connector port="8080" protocol="HTTP/1.1" address="10.0.0.4" connectionTimeout="20000" redirectPort="8443" />      <Connector port="8009" protocol="AJP/1.3" redirectPort="8443"/>   <Engine defaultHost="localhost" name="Catalina">      <Realm className="org.apache.catalina.realm.UserDatabaseRealm" resourceName="UserDatabase"/>  <Host appBase="webapps" autoDeploy="true" name="localhost" unpackWARs="true" xmlNamespaceAware="false" xmlValidation="false">     <Context docBase="myproject" path="/myproject" reloadable="true" source="org.eclipse.jst.jee.server:myproject"/></Host> </Engine> </Service> </Server>

Search Results

Search found 11313 results on 453 pages for 'ip aliasing'.

Page 72/453 | < Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79 | Next Page >

- by cdonner

- by Rob

- by Logman

- by Arvind

- by travisbotello

- by TheCleaner

- by haimg

- by JtheRocker

- by Chris

- by Michael

- by Michael Graff

- by Alice

- by tucson

- by Legend

- by Zerotoinfinite

- by recipriversexclusion

- by user175084

- by Mint

- by Micha

- by Codenotguru

- by Mercer

- by Usman Masood

- by jammkie same

- by Robert

- by Suresh S

< Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79 | Next Page >