Search Results

Search found 11903 results on 477 pages for 'ip forwarding'.

Page 72/477 | < Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >

• Nautilus cannot handle "sftp" locations via x11

  - by blockhead

  I'm logging into my home computer (Ubuntu 10.04) via ssh, and now I want to open a remote connection (one that is stored in my bookmarks). Nautilus tells me "Nautilus cannot handle "sftp" locations via x11". Why might this be?

  Read the article

• Access port on machine by connecting to other machine via SSH?

  - by piquadrat

  I have to access my home router's web interface on port 80. Unfortunately, the only way into the network I have at the moment is SSH to another machine on the same network. me ---|---SSH Box----Home Router My Google foo seems to have abandoned me, I couldn't didn't find anything helpful. Any ideas? Thanks! To clarify: I'm not at home right now. I do however have access to one machine on the network (a QNAP NAS) over SSH. I need to access the home router web interface on port 80 from my notebook which is outside of the home network.

  Read the article

• DNS forwarders limitations

  - by thejartender

  My question is very simple (maybe a tad too simple), but I will try and phrase it in a way to hopefully assist future visitors. I have just set up (successfully I hope) a DNS server at with some name server records on Ubuntu 12.10 while I am waiting for it to propagate I would like to know for future reference if I can use more than 2 forwarders in my /etc/named.conf.options.Would this speed up propagation? Do make this question and answer more valuable what other public DNS servers are available over and above Google's public DNS adresses: 8.8.8.8 8.8.4.4 I would also like to know if a restart of bind means that my servers will need to re-propagate? Is there a methodology to update settings while bind is running?

  Read the article

• Is it possible to host a web server from behind a NAT

  - by iamrohitbanga

  My PC is behind a NAT router that has a public IP address. If I want to host a website then I believe I need a domain name which I can purchase from some site which would pledge to resolve all DNS requests for that domain name and send the IP address of my NAT router (assuming I do not want to host my domain name on their servers). Now I want to host a web server on my computer. What changes should be done to the NAT router's configuration to forward all HTTP requests for example.com to my PC in the internal network. Is the above strategy correct? Is it commonly used?

  Read the article

• postfix cannot send email

  - by AKLP

  I'd like to mention that im really new to this so please bear with me. I'm trying to setup a forum software to send emails via postfix but I think my server has the port 25 blocked. I tried running these: works: ping alt2.gmail-smtp-in.l.google.com don't work: telnet alt2.gmail-smtp-in.l.google.com 25 telnet 66.249.93.114 25 tried flushing iptables and then using these rules but didn't work either: sudo iptables --flush sudo iptables -P INPUT ACCEPT sudo iptables -P OUTPUT ACCEPT sudo iptables -P FORWARD ACCEPT sudo iptables -F sudo iptables -X doing a telnet on 25 port to localhost url works but nothing when telnet'ing in none local urls. mail.log: Oct 17 01:20:24 webhost postfix/smtp[3642]: connect to alt2.gmail-smtp-in.l.google.com[2607:f8b0:400e:c03::1a]:25: Connection timed out Oct 17 01:20:24 webhost postfix/smtp[3643]: connect to alt2.gmail-smtp-in.l.google.com[2607:f8b0:400e:c03::1a]:25: Connection timed out Oct 17 01:20:24 webhost postfix/smtp[3642]: 4744380032: to=<[email protected]>, relay=none, delay=2892, delays=2741/0.03/150/0, dsn=4.4.1, status=deferred (connect to alt2.gmail-smtp-in.l.google.com[2607:f$

  Read the article

• VPC SSH port forward into private subnet

  - by CP510

  Ok, so I've been racking my brain for DAYS on this dilema. I have a VPC setup with a public subnet, and a private subnet. The NAT is in place of course. I can connect from SSH into a instance in the public subnet, as well as the NAT. I can even ssh connect to the private instance from the public instance. I changed the SSHD configuration on the private instance to accept both port 22 and an arbitrary port number 1300. That works fine. But I need to set it up so that I can connect to the private instance directly using the 1300 port number, ie. ssh -i keyfile.pem [email protected] -p 1300 and 1.2.3.4 should route it to the internal server 10.10.10.10. Now I heard iptables is the job for this, so I went ahead and researched and played around with some routing with that. These are the rules I have setup on the public instance (not the NAT). I didn't want to use the NAT for this since AWS apperantly pre-configures the NAT instances when you set them up and I heard using iptables can mess that up. *filter :INPUT ACCEPT [129:12186] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [84:10472] -A INPUT -i lo -j ACCEPT -A INPUT -i eth0 -p tcp -m state --state NEW -m tcp --dport 1300 -j ACCEPT -A INPUT -d 10.10.10.10/32 -p tcp -m limit --limit 5/min -j LOG --log-prefix "SSH Dropped: " -A FORWARD -d 10.10.10.10/32 -p tcp -m tcp --dport 1300 -j ACCEPT -A OUTPUT -o lo -j ACCEPT COMMIT # Completed on Wed Apr 17 04:19:29 2013 # Generated by iptables-save v1.4.12 on Wed Apr 17 04:19:29 2013 *nat :PREROUTING ACCEPT [2:104] :INPUT ACCEPT [2:104] :OUTPUT ACCEPT [6:681] :POSTROUTING ACCEPT [7:745] -A PREROUTING -i eth0 -p tcp -m tcp --dport 1300 -j DNAT --to-destination 10.10.10.10:1300 -A POSTROUTING -p tcp -m tcp --dport 1300 -j MASQUERADE COMMIT So when I try this from home. It just times out. No connection refused messages or anything. And I can't seem to find any log messages about dropped packets. My security groups and ACL settings allow communications on these ports in both directions in both subnets and on the NAT. I'm at a loss. What am I doing wrong?

  Read the article

• switch OFF syn cookies

  - by Nick

  We have several servers they have public IP's, but work together (one is with Load Balancer, orther with Apache Web server, other with MySQL and so on. Most of the ports are fire-walled, so only "local" servers can be connect there. However ALL servers have some ports that must be publicly open. We have SYN Cookies enabled and from time to time we got: possible SYN flooding on port 8080. Sending cookies. Port 8080 is not public. How we can switch OFF SYN Cookies for some ports (e.g. 8080, 3306 etc) or from some sources (e.g. our servers), but in same time SYN Cookies to be switched ON for all other ports, e.g. port 80. We found this similar problem, except our servers are with public IP's: SYN cookies on internal machines

  Read the article

• What router hardware or software should be used when multiple public IPs are routed into the same LAN?

  - by lcbrevard

  I am looking for recommendations to replace a set of consumer grade (Linksys, Netgear, Belkin) routers with something that can handle more traffic while routing more than one static public IP into the same LAN address space. We have a block of static public IPs, 5 usable, with Comcast Business. Currently four of them are in use for: General office access Web server Mail and DNS servers Download and backup web server for separate business All systems (a mixture of physical and virtual) are in the same LAN address space (10.x.y.0/24) to enable easy access between them inside the office. There are 30 or more systems in use depending on which virtual machines are currently active. We have a mixture of Windows, Linux, FreeBSD, and Solaris. Currently a separate consumer grade router is used for each of the four static addresses, with its WAN address set to the specific static address and a different gateway address for each: uses 10.x.y.1 - various ports are forwarded to various LAN IPs on systems with gateway 10.x.y.1 uses 10.x.y.254 - port 80 is forwarded to a server with gateway 10.x.y.254 uses 10.x.y.253 - ports for mail and dns are forwarded to a server with gateway 10.x.y.253 uses 10.x.y.252 - ports as needed are forwarded to server with gateway 10.x.y.252 Only router 1. is allowed to serve DHCP and address reservation based on the MAC is used for most of the internal "server" IP addresses so they are at fixed values. [Some are set static due to limitations in the address reservation capabilities of router 1.] And, yes, this really does work! But... I am looking for: better DHCP with more capable address reservation higher capacity so I don't have to periodically power cycle the routers One obvious improvement would be to have a real DHCP server and not use a consumer grade router for that purpose. I am torn between buying a "professional" router such as Cisco or Juniper or Sonic Wall verus learning to configure some spare hardware to perform this function. The price goes up extremely rapidly with capabilities for commercial routers! Worse, some routers require licensing based on the number of clients - a disaster in our environment with so many virtual machines. Sorry for such a long posting but I am getting tired of having to power cycle routers and deal with shifting IP addresses afterwards!

  Read the article

• Can I pass HTTPS traffic from one port to another?

  - by Kit Sunde

  I'm doing a proxy_pass in nginx on port 80 to 8000 on my remote server, and then a port forward from 8000 to 80 from the remote to my localhost. This works great, but I'd also like to do it with https but it seems like nginx needs a valid cert to pass the traffic on. Is there a way for my remote server to simply forward the trafic from port 443 to say 8443 (and then I'll forward remote 8443 to local 443). Then terminate ssl on my development machine instead instead of needing to do it on the remote server? My remote runs ubuntu and my localhost runs osx.

  Read the article

• VPN pre-shared key problems

  - by Owl

  I have two vpns set up on a Symantec Gateway Security 320. VPN 1 goes to a Symantec Firewall/VPN 100 to another clinic of ours and every hour they lose connectivity and the error log on the Firewall/VPN100 shows an invalid pre-shared key error, although, both devices show the same pre-shared key entered. VPN 2 goes to our software vendor to use an additional part of our program. I am unable to ping the remote address and so is the other company, but my VPN status shows it is connected. They have told me the pre-shared key seemed to be automatically trying to resubmit itself as if it were incorrect, about every hour even though it is correct. They also told me port80 traffic was closed but I show the HTTP service using 80 redirected to 80 in my firewall settings. Please help.

  Read the article

• X11 not sending windows to remote computer matlab

  - by MZimmerman6

  I am trying to set up my home desktop, running OS X Mountain Lion, to basically do a bunch of grunt work for me remotely. I have set up ssh, and am able to remotely control the computer fine, but the issue comes in when I try to run X11 apps, like MATLAB, remotely and get windows to pop up. Every time I try to bring up a new window it either opens that window on the remote computer (not the one I am using to control it), or it tells me it can't find a display. here is how I am setting up my ssh assume my matlab alias is set up properly, which it is. ssh -X [email protected] matlab -nodesktop figure; This will open the window on the computer I am SSHing into, and not on the remote one. Basically I want that window to open on the computer I am remoting from. I changed my SSH X11Forwarding and stuff to be yes in ssh_config and sshd_config. Any other suggestions?

  Read the article

• Forward e-mail to multiple addresses with conditions

  - by Valera Leontyev

  I need to forward e-mails to different mail accounts by different conditions. The aim is to create mail notification scheme for my company. I'd like to setup server on dedicated mail domain for it. Is there any software that helps to get my aim (Linux)? Examples: 1) forward all e-mail sent to [email protected] to x@x, y@y, z@z (no conditions) 2) forward e-mail sent to [email protected] where subject contains '[finance]' to a@b and b@b 3) forward e-mail sent to [email protected] where subject contains '[fault]' to s@s and s2@s. Receivers' domains are different. P.S. Now we use Gmail filters to get this functionality, but it's unstable and hard to maintain.

  Read the article

• Configure Postfix with Virtual Mailboxes to forward to a script

  - by keykiller91

  I am using the Postfix MTA with a virtual configuration from MySQL for the Users and Forwardings. Now I want some Adresses (that are dynamicaly generated, for writing via E-Mail to a Forum) to be forwarded to a php-script. I already have tried to put the script quoted and piped as destination bit it doesn't work. "|php -q /path/to/script.php" But if I send a mail to that domain it says: User “|php -q /path/to/script.php"@mydomain.tld not found

  Read the article

• What are the methods of separating network spaces in a LAN?

  - by dash17291

  Please detail me the methods. My thoughts: put the servers in separate (sub)networks the servers are forced to go through the firewall but no NAT is required assign more IP addresses to the internal interface of the server choosing gateway addresses from the clients and servers IP address ranges split DNS Netfilter/{iptables, ipset} could be heavily involved, I'm talking about Linux servers. See for example: Destination NAT Onto the Same Network from internal clients Please do not explain what is NAT or DNS. This is a theoretical question, but my poor English knowledge prevent me to describe it in a fancy fashion.

  Read the article

• Isolated Network Set-Up

  - by Isaac Kleinman

  I am looking to set up a small network for a client which would be isolated from his primary network. (I'm hoping to set-up the additional network as VMs on the primary network.) I've instructed the client to request a bunch of static ip addresses from his ISP, but I'm not sure how to proceed with setting this up. What hardware will I need and how do I go about the configuration? Heavy security is not my concern. All that's really required is that web requests from the two networks be presented to the outside world with different ip addresses.

  Read the article

• How can I monitor ports on Windows?

  - by Olav

  What is the simplest way on "local" (1*) Windows, for known ports, to: Find out if it is used. Find out as much as possible about what is behind the port. Find out as much as possible about traffic through the port. Find out if something else is interfering with the port and traffic to it. I have used Fiddler in the past, but I think that's mostly HTTP? I don't if Wire-shark does more? I think there is a tool closely integrated with Windows? Which one? (5). I am looking at NMap, but its seems to be more a suite of tools, and a high entry level. 1*: Primarily this is for what happens inside my Windows Machine, but if necessary, I can for example use a VM, or the wireless connection.

  Read the article

• Request to server x Reply from server y

  - by klaasio

  I need some advice from you guys: I'm dealing with a custom loadbalancer/software for which we will use 2 main servers and about 8 slave servers. In short: User sends request to main server, main server will receive and handle the requests, sends a request to a slave server and slave server should send data DIRECTLY to the "user". User - Main server Main server - Slave server Slave server - User The reason for which data should be send directly to the user and not through the main server is because of bandwidth and low budget. Now I have the following idea's: -IPinIP, but that is not possible in Layer7 (so far i know there some expensive routers for that) -IP Spoof, using C/C++ we will make it look like the reply came from main server. But I was thinking, perhaps the reply "slave server - User" could just come from a different IP without causing issues in the firewall from the user or his anti-virus. I don't know so well about "home" firewalls/routers and/or anti-virus software. I guess the user machine wouldn't handle it well?

  Read the article

• Redirect websockets to port?

  - by DigitalMan

  So, I've got a WebSocket server in C++, that is a completely stand-alone entity - handles header parsing, receiving, sending, all of it on its own, listening directly to the port. Problem is, it needs to run on a server alongside Apache, and that's a bit of a problem. Now, there was a solution here to a similar issue involving mod_proxy, but I'm hoping I can intercept and redirect WebSocket communication before Apache even knows about it, possibly with iptables. So the question is, is it possible to direct traffic bound for chat.mysite.net to a WebSocket server on, say, port 8080, while anything else headed to mysite.net proceeds as expected to Apache?

  Read the article

• How can I forward Mailer Daemon notifications in Outlook 2000?

  - by Elvith

  I have a rule in Outlook 2000 which states that any incoming message should be forwarded to another adress (The mailaccount is only used to send automatic alerts and notifications of an application, answers to this adress should be forwarded to the admin of this application). When the application tries to send an eMail to a non existent adress, the resulting Mailer Daemon notification won't be forwarded and the admin of the server will notice this problem very late (if ever). Is there a way to forward such messages to another adress? The problem seems to be, that Exchange delivers such notifications as "Report" but the rules will only apply to "Messages". Thanks in advance!

  Read the article

• How can I forward certain emails based on header information with Postfix?

  - by Jason Novinger

  We receive service requests via a particular email. The request is then forwarded to other addresses, using an entry in virtual_alias_maps. Upon seeing the word "EMERGENCY" in the subject line of a request to this email, I would also like to forward this to another address (an alias of our administrator's SMS email addresses). I think I can accomplish this with header checks and the REDIRECT command. However, REDIRECT only sends it to the redirected address, not the forwarded addresses. In the case of "EMERGENCY" I would like it to go to the redirect address and the original forwarded addresses. I am fairly new to Postfix and I feel like I am missing something here. Any suggestions?

  Read the article

• how does openvpn decide which interface to get IP addrs from

  - by bkrupa

  Using ubuntu 10.04 on both ends. We have a client and server machine on the SAME network attempting to make a vpn connection. We use the config files from here and made minimal changes. The server and client start and seem to connect without any trouble. The server looks like: Wed Feb 23 22:13:22 2011 MULTI: multi_create_instance called Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Re-using SSL/TLS context Wed Feb 23 22:13:22 2011 192.168.1.55:47166 LZO compression initialized Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Control Channel MTU parms [ L:1574 D:138 EF:38 EB:0 ET:0 EL:0 ] Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Data Channel MTU parms [ L:1574 D:1450 EF:42 EB:135 ET:32 EL:0 AF:3/1 ] Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Local Options hash (VER=V4): 'f7df56b8' Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Expected Remote Options hash (VER=V4): 'd79ca330' Wed Feb 23 22:13:22 2011 192.168.1.55:47166 TLS: Initial packet from 192.168.1.55:47166, sid=69112e42 5458135b *...* Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Wed Feb 23 22:13:22 2011 192.168.1.55:47166 [client1] Peer Connection Initiated with 192.168.1.55:47166 On the client side the connection looks like: Wed Feb 23 22:20:07 2011 [server] Peer Connection Initiated with [AF_INET]192.168.1.41:1194 Wed Feb 23 22:20:10 2011 SENT CONTROL [server]: 'PUSH_REQUEST' (status=1) Wed Feb 23 22:20:10 2011 PUSH: Received control message: 'PUSH_REPLY,route-gateway 10.8.0.4,ping 10,ping-restart 120,ifconfig 10.8.0.50 255.255.255.0' ... Wed Feb 23 22:20:10 2011 /sbin/ifconfig tap0 10.8.0.50 netmask 255.255.255.0 mtu 1500 broadcast 10.8.0.255 Wed Feb 23 22:20:10 2011 Initialization Sequence Completed The openvpn server has been configured to assign ip addresses in the range 10.8.0.* and the client has been given 10.8.0.50. When I run the following nmap from the client: Starting Nmap 5.00 ( http://nmap.org ) at 2011-02-23 22:04 EST Host 10.8.0.50 is up (0.00047s latency). Nmap done: 256 IP addresses (1 host up) scanned in 30.34 seconds Host 192.168.1.1 is up (0.0025s latency). Host 192.168.1.18 is up (0.074s latency). Host 192.168.1.41 is up (0.0024s latency). Host 192.168.1.55 is up (0.00018s latency). Nmap done: 256 IP addresses (4 hosts up) scanned in 6.33 seconds If I run an nmap from the server on 10.8.0.* I get nothing. If the client has two interfaces (wireless and tap device) when you look for a certain ip address, how does it decide which interface to connect on? edit I am trying to set up a vpn so that I can connect to my home network from a remote network. It seems like openvpn is connecting but none of the computers on my home network appear as network machines even after the connection is "Established". Stripped versions of the client and server config files are posted below. Thanks for any help you can offer. server.conf port 1194 proto udp dev tap ca /etc/openvpn/easy-rsa/keys/ca.crt cert /etc/openvpn/easy-rsa/keys/server.crt key /etc/openvpn/easy-rsa/keys/server.key # This file should be kept secret dh /etc/openvpn/easy-rsa/keys/dh1024.pem ifconfig-pool-persist ipp.txt server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100 keepalive 10 120 comp-lzo persist-key persist-tun status openvpn-status.log verb 3 client.conf client dev tap dev-node tap0901 proto udp remote ********** 1194 resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert client1.crt key client1.key comp-lzo verb 3 one other thing that might be helpful, I tried to connect using the openvpn gui for windows and the connection stalls out on "obtaining configuration" and the bar just scrolls forever.

  Read the article

• nginx : backend https, proxy_pass shows ip

  - by Vulpo

  I am using nginx as a reverse proxy listening at port 80 (http). I am using proxy_pass to forward requests to backend http and https servers. Everything works fine for my http server but when I try to reach the https server through nginx reverse proxy the ip of the https server is shown in the client's web browser. I want the uri of the nginx server to be shown instead of the https backend server's ip (once again, this works fine with the http server but not for the https server). See this post on the forum Here is my configuration file : server { listen 80; server_name domain1.com; access_log off; root /var/www; if ($request_method !~ ^(GET|HEAD|POST)$ ) { return 444; } location / { proxy_pass http://ipOfHttpServer:port/; } } server { listen 80; server_name domain2.com; access_log off; root /var/www; if ($request_method !~ ^(GET|HEAD|POST)$ ) { return 444; } location / { proxy_pass http://ipOfHttpsServer:port/; proxy_set_header X_FORWARDED_PROTO https; #proxy_set_header Host $http_host; } } When I try the "proxy_set_header Host $http_host" directive and "proxy_set_header Host $host" the web page can't be reached (page not found). But when I comment it, the ip of the https server is shown in the browser (which is bad). Does anyone have an idea ? My other configs files are : proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; #proxy_hide_header X-Powered-By; proxy_intercept_errors on; proxy_buffering on; proxy_cache_key "$scheme://$host$request_uri"; proxy_cache_path /var/cache/nginx levels=1:2 keys_zone=cache:10m inactive=7d max_size=700m; user www-data; worker_processes 2; error_log /var/log/nginx/error.log; pid /var/run/nginx.pid; events { worker_connections 1024; } http { include /etc/nginx/mime.types; default_type application/octet-stream; access_log /var/log/nginx/access.log; server_names_hash_bucket_size 64; sendfile off; tcp_nopush on; #keepalive_timeout 0; keepalive_timeout 65; tcp_nodelay on; gzip on; gzip_comp_level 5; gzip_http_version 1.0; gzip_min_length 0; gzip_types text/plain text/html text/css image/x-icon application/x-javascript; gzip_vary on; include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; } Thanks for your help !

  Read the article

• OpenStack: How to make Cloudify use the floating IP instead of the fixed one?

  - by polslinux

  I have a problem with Cloudify (both 2.5 and 2.6-rc release). I have an All-In-One Openstack 2013.1.1 setup and I'm trying to use Cloudify to bootstrap a cirros 0.3.1 vm. My quantum configuration is: pool of fixed ip (10.0.0.0/24) for vm management; pool of floating ip (192.168.1.170-190) taken from 192.168.1.1/24 (my lan) When I deploy a vm first, an ip from 10.0.0.0/24 is given (I cannot reach it from my PCs because it is only for vm management) and then I associate a floating ip with which I can ping (and ssh) the deployed machine. The problem is when I do: bootstrap-cloud openstack because Cloudify stay forever into "attempting to access management vm 10.0.0.3" and this is due to the fact that 10.0.0.3 is not reachable. What can I do to get Cloudify take the floating ip instead of the fixed one?

  Read the article

• How can I work out how many IP addresses there are in a given range?

  - by Jarede

  I'm wondering if there is a formula to work out the amount of IP addresses in a given range. I have a system that takes either a single IP address or a start and and end IP address: A single one might be: 145.16.23.241 A range might be: 145.16.23.122 - 145.16.23.144 The people inputting these aren't technical, nor are they receiving these details from technical people, so suggesting using CIDR notation isn't an answer for me. I want to be able to highlight that when entering a range such as: 122.100.10.12 - 128.10.200.140 it might not actually be a range and rather 2 singular IP addresses since such a range would comprise of x (large number of) IP addresses. Is there a basic formula to help me highlight this?

  Read the article

• Setting up an IP Camera with silverlight

  - by Sean

  I am trying to set up an IP camera and have it work through Silverlight I am using both Microsoft Expression and Microsoft Visual Studio 2008. I am able to do encoding with a usb connected web cam but I cannot find a way to use the encoder to connect to ip camera connected to our switch. Does anyone have experience setting up an ip camera to encode into the Silverlight framework?

  Read the article

< Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >