Search Results

Search found 50912 results on 2037 pages for 'r2 (release two)'.

Page 72/2037 | < Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >

• Dual displays not working - NVidia - Ubuntu 12.04 - Second Monitor - Two Screens

  - by user75105

  Graphics Card: NVidia 460 GTX. Driver: NVIDIA accelerated graphics driver (version current) I have one DVI monitor, an old Dell LCD from 2005, and one VGA monitor, an Asus ML238H from 2010 whose HDMI port broke. The Asus is plugged into my graphics card's primary monitor slot and is the better monitor even though it is VGA but my computer defaults to the Dell. This happens when I boot as well; the loading screens, the motherboard brand image, etc. are all displayed on the Dell monitor until Windows loads. Then both monitors work. The same thing happened when I booted up Ubuntu 12.04 but I did not see the second monitor when the log-in screen popped up, nor did I when I logged in. I went to System Settings/Displays and my Asus monitor is not an option. I clicked Detect Displays and the Asus is not detected. I looked at the other questions regarding NVIDIA drivers and recalled my problems with Ubuntu a few years ago and decided to check the driver. I went to Additional Drivers to install the proprietary driver and it looks like it's installed and active but I'm still having this problem. There is another driver option, the post-release NVIDIA driver, but that does not fix the problem either. Also, under System Details/Graphics the graphics device is listed as Unknown, which might indicate that it is using an open source generic driver and not the proprietary NVidia driver. But under Additional Drivers it says that I am using the NVidia driver. Any help is appreciated.

  Read the article

• Two small issues with Windows Phone 7 ApplicationBar buttons (and workaround)

  - by Laurent Bugnion

  When you work with the ApplicationBar in Windows Phone 7, you notice very fast that it is not quite a component like the others. For example, the ApplicationBarIconButton element is not a dependency object, which causes issues because it is not possible to add attached properties to it. Here are two other issues I stumbled upon, and what workaround I used to make it work anyway. Finding a button by name returns null Since the ApplicationBar is not in the tree of the Silverlight page, finding an element by name fails. For example consider the following code: <phoneNavigation:PhoneApplicationPage.ApplicationBar> <shell:ApplicationBar> <shell:ApplicationBar.Buttons> <shell:ApplicationBarIconButton IconUri="/Resources/edit.png" Click="EditButtonClick" x:Name="EditButton"/> <shell:ApplicationBarIconButton IconUri="/Resources/cancel.png" Click="CancelButtonClick" x:Name="CancelButton"/> </shell:ApplicationBar.Buttons> </shell:ApplicationBar> </phoneNavigation:PhoneApplicationPage.ApplicationBar> with private void EditButtonClick( object sender, EventArgs e) { CancelButton.IsEnabled = false; // Fails, CancelButton is always null } The CancelButton, even though it is named through an x:Name attribute, and even though it appears in Intellisense in the code behind, is null when it is needed. To solve the issue, I use the following code: public enum IconButton { Edit = 0, Cancel = 1 } public ApplicationBarIconButton GetButton( IconButton which) { return ApplicationBar.Buttons[(int) which] as ApplicationBarIconButton; } private void EditButtonClick( object sender, EventArgs e) { GetButton(IconButton.Cancel).IsEnabled = false; } Updating a Binding when the icon button is clicked In Silverlight, a Binding on a TextBox’s Text property can only be updated in two circumstances: When the TextBox loses the focus. Explicitly by placing a call in code. In WPF, there is a third option, updating the Binding every time that the Text property changes (i.e. every time that the user types a character). Unfortunately this option is not available in Silverlight). To select option 1, 2 (and in WPF, 3), you use the Mode property of the Binding class. The issue here is that pressing a button on the ApplicationBar does not remove the focus from the TextBox where the user is currently typing. If the button is a Save button, this is super annoying: The Binding does not get updated on the data object, the object is saved anyway with the old state, and noone understands what just happened. In order to solve this, you can make sure that the Binding is updated explicitly when the button is pressed, with the following code: private void SaveButtonClick(object sender, EventArgs e) { // Force update binding first var binding = MessageTextBox.GetBindingExpression( TextBox.TextProperty); binding.UpdateSource(); // Property was updated for sure, now we can save var vm = DataContext as MainViewModel; vm.Save(); } Obviously this is less maintainable than the usual way to do things in Silverlight. So be careful when using the ApplicationBar and remember that it is not a Silverlight element like the others!! Happy coding! Laurent   Laurent Bugnion (GalaSoft) Subscribe | Twitter | Facebook | Flickr | LinkedIn

  Read the article

• Two Weeks To Go, Still Time to Register

  - by speakjava

  Yes, it's now only two weeks to the start of the 17th JavaOne conference! This will be my ninth JavaOne, I came fairly late to this event, attending for the first time in 2002.  Since then I've missed two conferences, 2006 for the birth of my son (a reasonable excuse I think) and 2010 for reasons we'll not go into here.  I have quite the collection of show devices, I've still got the WoWee robot, the HTC phone for JavaFX, the programmable pen and the Sharp Zaurus.  The only one I didn't keep was the homePod music player (I wonder why?) JavaOne is a special conference for many reasons, some of which I list here: A great opportunity to catch up on the latest changes in the Java world.  This is not just in terms of the platform, but as much about what people are doing with Java to build new and cool applications. A chance to meet people.  We have these things called BoFs, which stands for "Birds of a Feather", as in "Birds of a feather, flock together".  The idea being to have sessions where people who are interested in the same topic don't just get to listen to a presentation, but get to talk about it.  These sessions are great, but I find that JavaOne is as much about the people I meet in the corridors and the discussions I have there as it is about the sessions I get to attend. Think outside the box.  There are a lot of sessions at JavaOne covering the full gamut of Java technologies and applications.  Clearly going to sessions that relate to your area of interest is great, but attending some of the more esoteric sessions can often spark thoughts and stimulate the imagination to go off and do new and exciting things once you get back. Get the lowdown from the Java community.  Java is as much about community as anything else and there are plenty of events where you can get involved.  The GlassFish party is always popular and for Java Champions and JUG leaders there's a couple of special events too. Not just all hard work.  Oracle knows how to throw a party and the appreciation event will be a great opportunity to mingle with peers in a more relaxed environment.  This year Pearl Jam and Kings of Leon will be playing live.  Add free beer and what more could you want? So there you have it.  Just a few reasons for why you want to attend JavaOne this year.  Oh, and of course I'll be presenting three sessions which is even more reason to go.  As usual I've gone for some mainstream ("Custom Charts" for JavaFX) and some more 'out there' ("Java and the Raspberry Pi" and "Gestural Interfaces for JavaFX").  Once again I'll be providing plenty of demos so more than half my luggage this year will consist of a Kinect, robot arm, Raspberry Pis, gamepad and even an EEG sensor. If you're a student there's one even more attractive reason for going to JavaOne: It's Free! Registration is here.  Hope to see you there!

  Read the article

• Intermittent Connection Issues to SQL Server 2008 R2 RTM

  - by Chandan Jha

  The problem I am facing is a very complex one and inspite of trying to gather a root cause of the problem, I am standing at the same place after 2 months with just bits and pieces of information.Here is a scenario: There is a windows 2003 server which uses an system DSN ODBC connection. I looked into the driver properties and it is as follows: Name Version File SQL Server 2000.86.3959.00 SQLSRV32.DLL Now, this system DSN has been given configured with TCP\IP in Network Libraries and 'determine port dynamically' is checked. Now, lets come to the database destination. It is hosted on Windows 2008 having SQL 2008 R2 RTM version 64-bit. Now, I will give you a an overview about the events that happen and whatever troubleshooting I could perform: I get an email saying 'blah blah' failed and the only message their application gets is 'cannot connect to database' I go the SQL Server logs and find the following information: Login failed for user ''. Reason: An attempt to login using SQL authentication failed. Server is configured for Windows authentication only. [CLIENT: 10.0.0.xx Error: 18456, Severity: 14, State: 58.] A quick search shows that this error may come when an SQL Server is configured with windows authentication but its not true. We have mixed mode and connection issue is intermittent. This SQL Server is configured to run on a local system account but since we use only SQL Server accounts to connect to this, there should not be any Kerberos errors. When I run a profiler trace and see only 'existing connections', i see a lot of them coming from my client server displaying the sql user but NO hostname is shown. Textdata field shows TCP\IP information along with some arithabort and ansi-null settings. Now, I tried looking into ring connectivity buffer by using following: SELECTCAST(record AS XML) FROM sys.dm_os_ring_buffers WHERE ring_buffer_type = 'RING_BUFFER_CONNECTIVITY' One sample output is: <ConnectivityTraceRecord> <RecordType>Error</RecordType> <RecordSource>Tds</RecordSource> <Spid>118</Spid> <SniConnectionId>5124905D-D1EC-460E-AD78-201050B78C67</SniConnectionId> <OSError>0</OSError> <SniConsumerError>18452</SniConsumerError> <SniProvider>7</SniProvider> <State>1</State> <RemoteHost>10.0.0.21</RemoteHost> <RemotePort>5008</RemotePort> <LocalHost>10.1.0.38</LocalHost> <LocalPort>1433</LocalPort> <RecordTime>6/6/2012 21:14:57.527</RecordTime> <TdsBuffersInformation> <TdsInputBufferError>0</TdsInputBufferError> <TdsOutputBufferError>0</TdsOutputBufferError> <TdsInputBufferBytes>120</TdsInputBufferBytes> </TdsBuffersInformation> <TdsDisconnectFlags> <PhysicalConnectionIsKilled>0</PhysicalConnectionIsKilled> <DisconnectDueToReadError>0</DisconnectDueToReadError> <NetworkErrorFoundInInputStream>0</NetworkErrorFoundInInputStream> <ErrorFoundBeforeLogin>0</ErrorFoundBeforeLogin> <SessionIsKilled>0</SessionIsKilled> <NormalDisconnect>0</NormalDisconnect> </TdsDisconnectFlags> </ConnectivityTraceRecord> <Stack> <frame id="0">0X000000000174C34B</frame> <frame id="1">0X0000000001748FDD</frame> <frame id="2">0X0000000002461001</frame> <frame id="3">0X0000000000C47E98</frame> <frame id="4">0X00000000008015AD</frame> <frame id="5">0X0000000000801492</frame> <frame id="6">0X00000000003CBBD8</frame> <frame id="7">0X00000000003CB8BA</frame> <frame id="8">0X00000000003CB6FF</frame> <frame id="9">0X00000000008E8FB6</frame> <frame id="10">0X00000000008E9175</frame> <frame id="11">0X00000000008E9839</frame> <frame id="12">0X00000000008E9502</frame> <frame id="13">0X0000000074E437D7</frame> <frame id="14">0X0000000074E43894</frame> <frame id="15">0X00000000775A652D</frame> Somehow all the errors show error number 18452 whereas I never found this error in my SQL logs where I see only 18456. I am just stuck on a dead end because this connection issue appears intermittently. Sorry for a long question but I hope if you read this, you can make out that I tried a lot at my end before giving up.

  Read the article

• Windows DNS Server 2008 R2 fallaciously returns SERVFAIL

  - by Easter Sunshine

  I have a Windows 2008 R2 domain controller which is also a DNS server. When resolving certain TLDs, it returns a SERVFAIL: $ dig bogus. ; <<>> DiG 9.8.1 <<>> bogus. ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: SERVFAIL, id: 31919 ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;bogus. IN A I get the same result for a real TLD like com. when querying the DC as shown above. Compare to a BIND server that is working as expected: $ dig bogus. @128.59.59.70 ; <<>> DiG 9.8.1 <<>> bogus. @128.59.59.70 ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NXDOMAIN, id: 30141 ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 1, ADDITIONAL: 0 ;; QUESTION SECTION: ;bogus. IN A ;; AUTHORITY SECTION: . 10800 IN SOA a.root-servers.net. nstld.verisign-grs.com. 2012012501 1800 900 604800 86400 ;; Query time: 18 msec ;; SERVER: 128.59.59.70#53(128.59.59.70) ;; WHEN: Wed Jan 25 14:09:14 2012 ;; MSG SIZE rcvd: 98 Similarly, when I query my Windows DNS server with dig . any, I get a SERVFAIL but the BIND servers return the root zone as expected. This sounds similar to the issue described in http://support.microsoft.com/kb/968372 except I am using two forwarders (128.59.59.70 from above as well as 128.59.62.10) and falling back to root hints so the preconditions to expose the issue are not the same. Nevertheless, I also applied the MaxCacheTTL registry fix as described and restarted DNS and the whole server as well but the problem persists. The problem occurs on all domain controllers in this domain and has occurred since half a year ago, even though the servers are getting automatic Windows updates. EDIT Here is a debug log. The client is 160.39.114.110, which is my workstation. 1/25/2012 2:16:01 PM 0E08 PACKET 000000001EA6BFD0 UDP Rcv 160.39.114.110 2e94 Q [0001 D NOERROR] A (5)bogus(0) UDP question info at 000000001EA6BFD0 Socket = 508 Remote addr 160.39.114.110, port 49710 Time Query=1077016, Queued=0, Expire=0 Buf length = 0x0fa0 (4000) Msg length = 0x0017 (23) Message: XID 0x2e94 Flags 0x0100 QR 0 (QUESTION) OPCODE 0 (QUERY) AA 0 TC 0 RD 1 RA 0 Z 0 CD 0 AD 0 RCODE 0 (NOERROR) QCOUNT 1 ACOUNT 0 NSCOUNT 0 ARCOUNT 0 QUESTION SECTION: Offset = 0x000c, RR count = 0 Name "(5)bogus(0)" QTYPE A (1) QCLASS 1 ANSWER SECTION: empty AUTHORITY SECTION: empty ADDITIONAL SECTION: empty 1/25/2012 2:16:01 PM 0E08 PACKET 000000001EA6BFD0 UDP Snd 160.39.114.110 2e94 R Q [8281 DR SERVFAIL] A (5)bogus(0) UDP response info at 000000001EA6BFD0 Socket = 508 Remote addr 160.39.114.110, port 49710 Time Query=1077016, Queued=0, Expire=0 Buf length = 0x0fa0 (4000) Msg length = 0x0017 (23) Message: XID 0x2e94 Flags 0x8182 QR 1 (RESPONSE) OPCODE 0 (QUERY) AA 0 TC 0 RD 1 RA 1 Z 0 CD 0 AD 0 RCODE 2 (SERVFAIL) QCOUNT 1 ACOUNT 0 NSCOUNT 0 ARCOUNT 0 QUESTION SECTION: Offset = 0x000c, RR count = 0 Name "(5)bogus(0)" QTYPE A (1) QCLASS 1 ANSWER SECTION: empty AUTHORITY SECTION: empty ADDITIONAL SECTION: empty Every option in the debug log box was checked except "filter by IP". By contrast, when I query, say, accounts.google.com, I can see the DNS server go out to its forwarder (128.59.59.70, for example). In this case, I didn't see any packets going out from my DNS server even though bogus. was not in the cache (the debug log was already running and this is the first time I queried this server for bogus. or any TLD). It just returned SERVFAIL without consulting any other DNS server, as in the Microsoft KB article linked above.

  Read the article

• Site-to-Site PPTP VPN connection between two Windows Server 2008 R2 servers

  - by steve_eyre

  We have two Windows Server 2008 R2 machines, one in our main office and one in a new office which we have just moved offsite. The main office has previously been handling client-to-server PPTP VPN connections. Now that we have moved our second server out of office, we want to set up a demand-dial or persistent VPN connection from the second server to the primary. Using a custom setting RRAS profile, we have successfully managed to set up a site-to-site VPN connection so that from the second server itself, it can access any of the devices in the main office and communicate back. However, any connected machines in the second office cannot use this connection, even when using the second server as gateway. The demand-dial interface is setup from the Second Server dialing into Main Server and a static route set up on RRAS for 192.168.0.0 with subnet mask 255.255.0.0 pointing down this network interface. The main office has the network of 192.168.0.0/16 (subnet mask 255.255.0.0). The second office has the network of 172.16.100.0/24 (subnet mask 255.255.255.0). What steps do we need to take to ensure traffic from the second office PCs going towards 192.168.x.x addresses use the VPN route? Many Thanks in advance for any help the community can offer. Debug Information Here is the route print output from the second server: =========================================================================== Interface List 23...........................Main Office 22...........................RAS (Dial In) Interface 16...e0 db 55 12 fa 02 ......Local Area Connection - Virtual Network 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 14...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 24...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #3 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 172.16.100.250 172.16.100.222 261 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 <MAIN OFFICE IP> 255.255.255.255 172.16.100.250 172.16.100.222 6 172.16.100.0 255.255.255.0 On-link 172.16.100.222 261 172.16.100.113 255.255.255.255 On-link 172.16.100.113 306 172.16.100.222 255.255.255.255 On-link 172.16.100.222 261 172.16.100.223 255.255.255.255 On-link 172.16.100.222 261 172.16.100.224 255.255.255.255 On-link 172.16.100.222 261 172.16.100.225 255.255.255.255 On-link 172.16.100.222 261 172.16.100.226 255.255.255.255 On-link 172.16.100.222 261 172.16.100.227 255.255.255.255 On-link 172.16.100.222 261 172.16.100.228 255.255.255.255 On-link 172.16.100.222 261 172.16.100.229 255.255.255.255 On-link 172.16.100.222 261 172.16.100.230 255.255.255.255 On-link 172.16.100.222 261 172.16.100.255 255.255.255.255 On-link 172.16.100.222 261 192.168.0.0 255.255.0.0 192.168.101.87 192.168.101.17 266 192.168.101.17 255.255.255.255 On-link 192.168.101.17 266 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 172.16.100.222 261 224.0.0.0 240.0.0.0 On-link 172.16.100.113 306 224.0.0.0 240.0.0.0 On-link 192.168.101.17 266 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 172.16.100.222 261 255.255.255.255 255.255.255.255 On-link 172.16.100.113 306 255.255.255.255 255.255.255.255 On-link 192.168.101.17 266 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 0.0.0.0 0.0.0.0 192.168.0.200 Default 0.0.0.0 0.0.0.0 172.16.100.250 Default =========================================================================== IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 1 306 ::1/128 On-link 16 261 fe80::/64 On-link 16 261 fe80::edf4:85c6:3c15:dcbe/128 On-link 1 306 ff00::/8 On-link 16 261 ff00::/8 On-link 22 306 ff00::/8 On-link =========================================================================== Persistent Routes: None And here is the route print from one of the second office PCs: =========================================================================== Interface List 11...10 78 d2 32 53 27 ......Atheros AR8151 PCI-E Gigabit Ethernet Controller 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 13...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 172.16.100.250 172.16.100.103 10 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 172.16.100.0 255.255.255.0 On-link 172.16.100.103 266 172.16.100.103 255.255.255.255 On-link 172.16.100.103 266 172.16.100.255 255.255.255.255 On-link 172.16.100.103 266 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 172.16.100.103 266 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 172.16.100.103 266 =========================================================================== Persistent Routes: None IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 1 306 ::1/128 On-link 11 266 fe80::/64 On-link 11 266 fe80::e973:de17:a045:aa78/128 On-link 1 306 ff00::/8 On-link 11 266 ff00::/8 On-link =========================================================================== Persistent Routes: None

  Read the article

• Uninstalled server 2008 now router won't handle DHCP

  - by john

  My set up is this. server behind router, router has a server and switch connected to it with multiple computers. router used to serve DHCP and DNS, a couple of days ago installed AD, DNS and DHCP on the server, and the server gave out IP's. For various reasons we had to uninstall the domain on our server. I removed AD, DHCP and DNS from the roles and set the router back to serving DHCP and DNS. Now I can't get computers on the network. I reset my router back to factory defaults, and if I plug a computer directly into the router I can get a IP address, but all the computers behind the switch can't get an IP address and can't see the router. All my computers say unidentified network, and if I ping the router it says host is unreachable. On the other hand, my wireless devices are just fine and connect no problem. But for desktops, ipconfig /release doesn't release anything and /renew can't find a server to renew on. My router log shows several FIN scans but they are from innocuous websites (google, netgear) and it shows a couple of smurf attacks but they are all from my external IP. Any ideas? the server isn't even connected to the route right now, and all the computers are set for dynamic IP addresses.. I don't know what else to try? Any help?

  Read the article

• [CFArray release]: message sent to deallocated instance

  - by arielcamus

  Hi, I'm using the following method in my code: - (NSMutableArray *) newOrderedArray:(NSMutableArray *)array ByKey:(NSString *)key ascending:(BOOL)ascending { NSSortDescriptor *idDescriptor = [[NSSortDescriptor alloc] initWithKey:key ascending:ascending]; NSArray *sortDescriptors = [NSArray arrayWithObject:idDescriptor]; NSArray *orderArray = [array sortedArrayUsingDescriptors:sortDescriptors]; [idDescriptor release]; NSMutableArray *result = [NSMutableArray arrayWithArray:orderArray]; return result; } Is this a well-coded convenience method? As I think, it returns an autoreleased NSMutableArray. This method is called by another one: - (id) otherMethod { NSMutableArray *otherResult = [[[NSMutableArray alloc] initWithCapacity:[otherArray count]] autorelease]; // I add some stuff to otherResult and then... NSMutableArray *result = [dbUtils newOrderedArray:otherResult ByKey:@"objectId" ascending:NO]; return result; } This method (otherMethod) is called in some view controller where I want to store returned array and release it when deallocating the view controller. However, when [result retain] is called in this view controller (because I need it to be available and I can't allow it to be deallocated) I receive the following error: [CFArray release]: message sent to deallocated instance I've tried to log [result retainCount] just before calling retain and it print "1". I don't understand why an error is thrown when calling retain. Thank you, A

  Read the article

• Standardizing a Release/Tools group on a specific language

  - by grahzny

  I'm part of a six-member build and release team for an embedded software company. We also support a lot of developer tools, such as Atlassian's Fisheye, Jira, etc., Perforce, Bugzilla, AnthillPro, and a couple of homebrew tools (like my Django release notes generator). Most of the time, our team just writes little plugins for larger apps (ex: customize workflows in Anthill), long-term utility scripts (package up a release for QA), or things like Perforce triggers (don't let people check into a specific branch unless their change description includes a bug number; authenticate against Active Directory instead of Perforce's internal passwords). That's about the scale of our problems, although we sometimes tackle something slightly more sizable. My boss, who is reasonably technical, has asked us to standardize on one or two languages so we can more easily substitute for each other. He's advocating bash scripts and Perl, due to their universality and simplicity. I can see his point--we mostly do "glue", so why not use "glue" languages rather than saddle ourselves with something designed for much larger projects? Since some of the tools we work with are Java-based, we do need to use something that speaks JVM sometimes. (The path of least resistance for these projects is BeanShell and Groovy.) I feel a tremendous itch toward language advocacy, but I'm trying to avoid saying "We should use Python 'cause I like it and Perl is gross." Instead, I'm trying to come up with a good approach to defining our problem set: what problems do we solve with scripts? Would we benefit from a library of common functions by our team, or are most of our projects more isolated? What is it reasonable to expect my co-workers to learn? What languages give us the most ease of development and ease of modification? Can you folks suggest some useful ways to approach this problem, both for my own thinking process and to help me facilitate some brainstorming among my coworkers?

  Read the article

• Basic question on retain/release semantics from Apple's reference library

  - by davetron5000

  I have done Objective-C way back when, and have recently (i.e. just now) read the documentation on Apple's site regarding the use of retain and release. However, there is a bit of code in their Creating an iPhone Application page that has me a bit confused: - (void)setUpPlacardView { // Create the placard view -- it calculates its own frame based on its image. PlacardView *aPlacardView = [[PlacardView alloc] init]; self.placardView = aPlacardView; [aPlacardView release]; // What effect does this have on self.placardView?! placardView.center = self.center; [self addSubview:placardView]; } Not seeing the entire class, it seems that self.placardView is also a PlacardView * and the assignment of it to aPlacardView doesn't seem to indicate it will retain a reference to it. So, it appears to me that the line I've commented ([aPlacardView release];) could result in aPlacardView having a retain count of 0 and thus being deallocated. Since self.placardView points to it, wouldn't that now point at deallocated memory and cause a problem?

  Read the article

• Different output between release and Debug

  - by AthomSfere

  I can't figure this one out. I have a c++ Application that works in Debug mode exactly as expected: #include "stdafx.h" #include <string> #include <Windows.h> #include <iostream> using namespace std; void truncateServer(std::string inString); int _tmain(int argc, char *argv[]) { char* server = argv[1]; truncateServer(server); } void truncateServer(std::string inString) { std::string server = ""; int whackCount = 0; for (unsigned int i = 0; i < inString.length(); i++) { char c = inString[i]; if (whackCount < 3) { if (c == '\\') whackCount++; else server += c; } } cout << server; } For example if I call the server I want via its UNC path \\serverName\Share\ in the debug it gives me exactly what I want: servername However, if I use the release build I get nothing: I deleted the release output folder, but the issue is exactly the same. I can only assume there is some other difference between the release and build applications that is exposing a major issue with my code? Or another difference between the outputs I need to account for. What do I need to do to get the expected output?

  Read the article

• Booting from integrated RAID controller when another RAID controller is installed in a PCIe slot

  - by Antony Scott

  I have a GA MA785GT UD3H motherboard with Windows Server 2008 R2 installed on a RAID1 using the on-board RAID controller. I have now installed a RocketRaid 2680 controller and set up a RAID5 for all my data to be stored on. Unfortunately I now cannot boot from the RAID1 anymore, the PC is trying to boot from the RAID5! Does anyone have any experience of this motherboard / RAID controller combination?

  Read the article

• net use - System error 1920 has occurred

  - by Martin

  On Windows Server 2008 R2, when I run the following command I am getting the 1920. I've tried pretty much everything I am aware of and I can't figure out what causes the error. When I try to map the same network share using the UI and same credentials, everything works fine. net use * \\EAAA-12345\C$\ /USER:\\EAAA-12345\Administrator Passw0rd /PERSISTENT:NO Anybody knows how to get rid of the 1920 error?

  Read the article

• Remote Desktop event ID 20499. No noticeable issues

  - by Marc05

  I get a warning event with ID 20499 for TerminalServices-RemoteConnectionManager.The error is: Remote Desktop Services has taken too long to load the user configuration from server \server.domain.home for user administrator. Yet, I don't see any issues (I'm guessing because that user is on the machine local). Why am I getting this warning? I'm on Windows Server 2012 R2 connecting from a Windows 8.1.

  Read the article

• Windows Web Server 2008 R2 Server Core local password complexity

  - by Dennis Allen

  How can I disable the local user account password complexity settings on Windows 2008 R2 "Server Core"? I am trying to migrate our windows 2003 web server to windows 2008 R2. I am trying to see if I can use the "Server Core" install, and it has been a very internet search intensive experience. What I can't find out how to do is to find out how to disable password complexity for local user accounts. While our user account generator currently creates nice strong passwords, there was a time when this was not the case and unfortunately forcing the users to change their password is not an option at this time. Any help greatly appreciated. Dennis

  Read the article

• Adding Hyper-V Role Errors

  - by Brian

  Hello, I have a Win 2008 R2 Data Center machine, and when I added the Hyper-V role, I got the following errors: 'Hypervisor' driver required by the Virtual Machine Management service is not installed or is disabled. Check your settings or try reinstalling the Hyper-V role. Hyper-V launch failed; Either VMX not present or not enabled in BIOS. ANy help would be appreciated as I am a n00b to the server world. Thanks.

  Read the article

• Why aren't RemoteApp icons showing up

  - by Andy Schneider

  I have a Windows 2008 R2 server running RDS. I have installed and configured RemoteApp to publish applications with RDS Web Access. When I browse to https://servernname.domain.local/RDWeb I can log in and get to the RemoteApp Programs tab, but there are no icons or apps to click on. I have added a bunch of apps in Remote App manager and they are all enabled for RD Web Access. Also, I am an administrator on the server.

  Read the article

• On a VPS that runs DB and IIS, should I limit the RAM used by SQL Server?

  - by Donald Hughes

  I have a Windows 2008 R2 VPS with 1 GB of RAM. I'm using the VPS to run SQL Server 2008 Express and IIS 7.5. I've noticed that SQL Server tends to use as much memory as it can, to the detriment of other applications (and this makes sense with a server is dedicated to running SQL Server). Should I set a limit? If so, what would a reasonable level be?

  Read the article

• Assigning static IP to VPN server

  - by Akroy

  I have a Win2008 R2 server that is going to be receiving many VPN connections. I want to be able to staticly set the IP addresses of both ends of each connection based on the user. I easily found how to do this for the client: when you're managing the user account, go to "Dial-In" and click "Assign Static IP Addresses." Now, whenever a certain account dials in, I have control over their client VIP, but how do I set my server VIP for each account?

  Read the article

• What is the differences between a Remote File Share Witness Quorum and a Disk Witness Quorum?

  - by arex1337

  Say you set up a Windows Server Failover Cluster consisting of two nodes, on Windows Server 2008 R2 Enterprise. Now when you want to configure quorum you can use either a remote shared folder, or a shared disk (unless your nodes are separated geographically). I'd love to know more about when to use a disk witness and when to use a file share witness. What are the differences? Does it matter at all?

  Read the article

• Working with WDS

  - by Xaver

  I work with WDS on Windows Server 2008-R2. I need to create some WIM images. For creating images i need the ImageX utility it is member of WAIK. Can i download the ImageX separately from the WAIK? Also i need articles to create images with ImageX (both of them boot and system images)

  Read the article

• IIS 7.5 Unable to write configuration file

  - by flumeware

  I have a fault regarding IIS 7.5 on Win Server 2008 R2, whenever I try to change any site bindings or start an application pool I get the error below: Filename: \\?\C:\Windows\system32\inetsrv\config\applicationHost.config Error: Cannot write configuration file the application pools run as network service. None of the sites that are running have been affected however their configuration cannot be changed UPDATED 05/10/2012 A reboot fixed this issue, however I am curious to know what caused it in the first place.

  Read the article

• Some DHCP clients end up with wrong DNS server

  - by Nic Waller

  The scenario: DC running Windows Server 2008 R2 providing DNS + DHCP Cisco 1811 Router as the gateway 30 Windows XP DHCP clients on the LAN The problem: Some workstations are spontaneously switching to an incorrect DNS server. Specifically, ipconfig /all shows that they start using the gateway as a DNS server. This happens about 5-10 times a day to various computers, sometimes more than once per day. The workaround: Repairing the connection on the XP client always fixes the problem, and the correct DNS server address is obtained. We lost our main DNS/DHCP machine a week ago, and had to bring this one online as a spare. We've been having this issue since then. DHCP leases on the old and new servers are configured for "wired" (8 day) duration. There are definitely no other DHCP servers active on the LAN. So far there is no discernible pattern about which clients will show this problem, or when. When I ran DCDIAG /test:DNS it came back clean. Manual inspection of the DNS zone shows that all the records are appearing as expected, with no traces of the previous machine in there. Update Feb 27: Added screenshots. Here is a screenshot of the DHCP scope options on the 2008 R2 server. And here is a screenshot of ipconfig /all running on a healthy host. I don't have any ailing hosts at the moment, but will grab a screencap next time it happens. Update Feb 28: More screenshots. Here's a screenshot of DHCP and DNS traffic from a healthy client when repairing the local area connection. There's definitely only one server responding, but it does seem strange that the negotiation takes place twice. I'll try to get a similar capture from a sick machine this coming week. Update Mar 01: Caught a bad ipconfig. Here's a screenshot of ipconfig /all from a client that had this issue. It says the lease was issued this morning, but it doesn't even have an entry for the secondary DNS I set up yesterday. Both DNS servers were discovered properly when repairing the connection. Update Mar 01: It even got the sysadmin! This issue finally affected my personal workstation this morning. Unfortunately I had just rebooted and wasn't running a packet dump at the time. I set up a secondary server yesterday, and was logging all DNS traffic to it. My machine had not contacted the secondary DNS in over half an hour, so that says to me that it's just spontaneously reverting to the gateway without even failing over to secondary DNS first. Today I swapped the order of the DNS servers in DHCP, so the secondary is primary and vice versa. I will update again once I know how that goes.

  Read the article

• How to install ADFS 3.0 in standalone mode?

  - by user18044

  I've installed Windows 2012 R2 and enabled the ADFS (3.0?) feature. After installation, it asks to configure ADFS, but this step requires a user account that is a domain administrator, as it wants to create certificate containers and SPN records. In ADFS 2.0, you could install in standalone mode which required only local admin rights, storing everything in the Windows Internal Database. If this still possible with the latest version? If so, how do I configure ADFS in standalone mode?

  Read the article

• Running Linux or Windows virtual

  - by Alxandr

  I'm installing a new server after this weekend, and it musth have both windows server 2008 r2 and linux (probably ubuntu) running, but I'm wondering which one of them I should run virtual. Windows will be used mostly for rdp and for serving asp.net webpages, linux will host some django-applications and a postgreSQL server etc.

  Read the article

< Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >