Search Results

Search found 19966 results on 799 pages for 'wild thing'.

Page 724/799 | < Previous Page | 720 721 722 723 724 725 726 727 728 729 730 731  | Next Page >

• What to do after a servicing fails on TFS 2010

  - by Martin Hinshelwood

  What do you do if you run a couple of hotfixes against your TFS 2010 server and you start to see seem odd behaviour? A customer of mine encountered that very problem, but they could not just, or at least not easily, go back a version.   You see, around the time of the TFS 2010 launch this company decided to upgrade their entire 250+ development team from TFS 2008 to TFS 2010. They encountered a few problems, owing mainly to the size of their TFS deployment, and the way they were using TFS. They were not doing anything wrong, but when you have the largest deployment of TFS outside of Microsoft you tend to run into problems that most people will never encounter. We are talking half a terabyte of source control in TFS with over 80 proxy servers. Its certainly the largest deployment I have ever heard of. When they did their upgrade way back in April, they found two major flaws in the product that meant that they had to back out of the upgrade and wait for a couple of hotfixes. KB983504 – Hotfix KB983578 – Patch KB2401992 -Hotfix In the time since they got the hotfixes they have run 6 successful trial migrations, but we are not talking minutes or hours here. When you have 400+ GB of data it takes time to copy it around. It takes time to do the upgrade and it takes time to do a backup. Well, last week it was crunch time with their developers off for Christmas they had a window of opportunity to complete the upgrade. Now these guys are good, but they wanted Northwest Cadence to be available “just in case”. They did not expect any problems as they already had 6 successful trial upgrades. The problems surfaced around 20 hours in after the first set of hotfixes had been applied. The new Team Project Collection, the only thing of importance, had disappeared from the Team Foundation Server Administration console. The collection would not reattach either. It would not even list the new collection as attachable! Figure: We know there is a database there, but it does not This was a dire situation as 20+ hours to repeat would leave the customer over time with 250+ developers sitting around doing nothing. We tried everything, and then we stumbled upon the command of last resort. TFSConfig Recover /ConfigurationDB:SQLServer\InstanceName;TFS_ConfigurationDBName /CollectionDB:SQLServer\instanceName;"Collection Name" -http://msdn.microsoft.com/en-us/library/ff407077.aspx WARNING: Never run this command! Now this command does something a little nasty. It assumes that there really should not be anything wrong and sets about fixing it. It ignores any servicing levels in the Team Project Collection database and forcibly applies the latest version of the schema. I am sure you can imagine the types of problems this may cause when the schema is updated leaving the data behind. That said, as far as we could see this collection looked good, and we were even able to find and attach the team project collection to the Configuration database. Figure: After attaching the TPC it enters a servicing mode After reattaching the team project collection we found the message “Re-Attaching”. Well, fair enough that sounds like something that may need to happen, and after checking that there was disk IO we left it to it. 14+ hours later, it was still not done so the customer raised a priority support call with MSFT and an engineer helped them out. Figure: Everything looks good, it is just offline. Tip: Did you know that these logs are not represented in the ~/Logs/* folder until they are opened once? The engineer dug around a bit and listened to our situation. He knew that we had run the dreaded “tfsconfig restore”, but was not phased. Figure: This message looks suspiciously like the wrong servicing version As it turns out, the servicing version was slightly out of sync with the schema. KB Schema Successful           KB983504 341 Yes   KB983578 344 sort of   KB2401992 360 nope   Figure: KB, Schema table with notation to its success The Schema version above represents the final end of run version for that hotfix or patch. The only way forward The problem was that the version was somewhere between 341 and 344. This is not a nice place to be in and the engineer give us the  only way forward as the removal of the servicing number from the database so that the re-attach process would apply the latest schema. if his sounds a little like the “tfsconfig recover” command then you are exactly right. Figure: Sneakily changing that 3 to a 1 should do the trick Figure: Changing the status and dropping the version should do it Now that we have done that we should be able to safely reattach and enable the Team Project Collection. Figure: The TPC is now all attached and running You may think that this is the end of the story, but it is not. After a while of mulling and seeking expert advice we came to the opinion that the database was, for want of a better term, “hosed”. There could well be orphaned data in there and the likelihood that we would have problems later down the line is pretty high. We contacted the customer back and made them aware that in all likelihood the repaired database was more like a “cut and shut” than anything else, and at the first sign of trouble later down the line was likely to split in two. So with 40+ hours invested in getting this new database ready the customer threw it away and started again. What would you do? Would you take the “cut and shut” to production and hope for the best?

  Read the article

• Career guidance/advice for Junior-level Software Engineer [closed]

  - by John Do

  I have quite a few questions on my mind, so please bare with me. Please don't feel obligated to answer all of them, any as you choose will do. I'd appreciate if you could share some insight on any of these. Before I begin, some context: I currently have almost two years of professional experience as a Software Engineer, mainly developing software in Java. At this point, I feel that I have reached the peak in my career growth at the current company I am at and therefore I am looking for a new job, ideally again, as a Software Engineer. I have been interviewing for the past few months casually but have not had luck with companies I have a passion for. So, in no particular order - 1) In general, what are your thoughts on having graduate degrees in CS / Software Engineering. How much does it influence a salary increase, and do you think it's beneficial when working on real-world problems? I get the sense that a graduate degree in the field is trivial unless you really have a passion for research. 2) In general, in professional practice, how often had you have to write your own data structures and "complex" algorithms from scratch? In my own work, I have found myself relying mainly on third-party frameworks and the Java standard library to implement solutions as per business requirements. What are your thoughts on this? 3) In terms of resume, I feel the most ambivalent here. I want to be able to "blemish" my resume to a certain extent so that it stands out from others', but at the same time I do not want to over-exagerate my abilities. How do you strike a balance here? For example: I say that I am proficient in Java with data structures and algorithms. This is obviously a subjective and relative statement. I've taken the classes in my undergrad, and I've applied it in my work experience. What I feel as "prociency" can be seen as junior-level to others. How do you know what to say? Most of the time, recruiters (with no technical background) will be looking for keywords that stand out. This leads me to my next question (4). 4) Just from interviewing for the past few months (and getting plenty of rejections), I've come to realize that I may not be as proficient in data structures and algorithms as I thought I was. Do you think it's a good idea to remove the "proficient in java/data structure and algorithms"? I feel that being too hoenst on the resume will impede me from scoring opportunities to even have an interview with top-notch companies. What are your thoughts? 5) What is the absolute "must-have" knowledge going into a technical interview? I've been practicing several algorithmic and data sturcture problems now, and I feel that my abilities to solve arbitrary problems efficiently has not gotten significantly better. Do you think these abilities are something innate - it's either you have in you, or you don't? How can you teach yourself to learn, if you will? 6) How easy is it to go from industry/function to the next? I work mainly with backend technologies and I'm now interested in working with the frontend, i.e javascript,jquery,php or even mobile development. In your own experience, how did you not get pidgeon holed in your career? I feel that the choices you make now ultimately decide your future. As cliche as it sounds, I think it may be true. Here's what I mean: you've worked mainly as a backend engineer, people are interested in you doing the same thing since you've already accumulated experience in that function. How do get experience in a new function if people won't accept you because you don't already have it? It's a catch 22, you see... Are side projects the only real way to help you move from one function to another that you're truly interested in? For example: I could start writing my own mobile applications, even though I've worked mainly on the backend. Thanks so much for the long read. As a relatively new engineer to the real world, I am very humble and would like those who are experienced to shed some light. Thank you so much.

  Read the article

• When is my View too smart?

  - by Kyle Burns

  In this posting, I will discuss the motivation behind keeping View code as thin as possible when using patterns such as MVC, MVVM, and MVP.  Once the motivation is identified, I will examine some ways to determine whether a View contains logic that belongs in another part of the application.  While the concepts that I will discuss are applicable to most any pattern which favors a thin View, any concrete examples that I present will center on ASP.NET MVC. Design patterns that include a Model, a View, and other components such as a Controller, ViewModel, or Presenter are not new to application development.  These patterns have, in fact, been around since the early days of building applications with graphical interfaces.  The reason that these patterns emerged is simple – the code running closest to the user tends to be littered with logic and library calls that center around implementation details of showing and manipulating user interface widgets and when this type of code is interspersed with application domain logic it becomes difficult to understand and much more difficult to adequately test.  By removing domain logic from the View, we ensure that the View has a single responsibility of drawing the screen which, in turn, makes our application easier to understand and maintain. I was recently asked to take a look at an ASP.NET MVC View because the developer reviewing it thought that it possibly had too much going on in the view.  I looked at the .CSHTML file and the first thing that occurred to me was that it began with 40 lines of code declaring member variables and performing the necessary calculations to populate these variables, which were later either output directly to the page or used to control some conditional rendering action (such as adding a class name to an HTML element or not rendering another element at all).  This exhibited both of what I consider the primary heuristics (or code smells) indicating that the View is too smart: Member variables – in general, variables in View code are an indication that the Model to which the View is being bound is not sufficient for the needs of the View and that the View has had to augment that Model.  Notable exceptions to this guideline include variables used to hold information specifically related to rendering (such as a dynamically determined CSS class name or the depth within a recursive structure for indentation purposes) and variables which are used to facilitate looping through collections while binding. Arithmetic – as with member variables, the presence of arithmetic operators within View code are an indication that the Model servicing the View is insufficient for its needs.  For example, if the Model represents a line item in a sales order, it might seem perfectly natural to “normalize” the Model by storing the quantity and unit price in the Model and multiply these within the View to show the line total.  While this does seem natural, it introduces a business rule to the View code and makes it impossible to test that the rounding of the result meets the requirement of the business without executing the View.  Within View code, arithmetic should only be used for activities such as incrementing loop counters and calculating element widths. In addition to the two characteristics of a “Smart View” that I’ve discussed already, this View also exhibited another heuristic that commonly indicates to me the need to refactor a View and make it a bit less smart.  That characteristic is the existence of Boolean logic that either does not work directly with properties of the Model or works with too many properties of the Model.  Consider the following code and consider how logic that does not work directly with properties of the Model is just another form of the “member variable” heuristic covered earlier: @if(DateTime.Now.Hour < 12) {     <div>Good Morning!</div> } else {     <div>Greetings</div> } This code performs business logic to determine whether it is morning.  A possible refactoring would be to add an IsMorning property to the Model, but in this particular case there is enough similarity between the branches that the entire branching structure could be collapsed by adding a Greeting property to the Model and using it similarly to the following: <div>@Model.Greeting</div> Now let’s look at some complex logic around multiple Model properties: @if (ModelPageNumber + Model.NumbersToDisplay == Model.PageCount         || (Model.PageCount != Model.CurrentPage             && !Model.DisplayValues.Contains(Model.PageCount))) {     <div>There's more to see!</div> } In this scenario, not only is the View code difficult to read (you shouldn’t have to play “human compiler” to determine the purpose of the code), but it also complex enough to be at risk for logical errors that cannot be detected without executing the View.  Conditional logic that requires more than a single logical operator should be looked at more closely to determine whether the condition should be evaluated elsewhere and exposed as a single property of the Model.  Moving the logic above outside of the View and exposing a new Model property would simplify the View code to: @if(Model.HasMoreToSee) {     <div>There’s more to see!</div> } In this posting I have briefly discussed some of the more prominent heuristics that indicate a need to push code from the View into other pieces of the application.  You should now be able to recognize these symptoms when building or maintaining Views (or the Models that support them) in your applications.

  Read the article

• Why does calling CreateDXGIFactory prevent my program from exiting?

  - by smoth190

  I'm using CreateDXGIFactory to get the graphics adapters and display modes. When I call it, it works fine and I get all the data. However, when I exit my program, the main Win32 thread exits, but something stays open because it keeps debugging. Does CreateDXGIFactory create an extra thread and I'm not closing it? I don't understand. The only thing I would suspect is that in the documentation it says it doesn't work if it's called from DllMain. It is in a DLL, but it's not called from DllMain. And it doesn't fail, either. I'm using DirectX 11. Here is the function that initializes DirectX. I haven't gotten past retrieving the refresh rate because of this problem. I commented everything out to pinpoint the problem. bool CGraphicsManager::InitDirectX(HWND hWnd, int width, int height) { HRESULT result; IDXGIFactory* factory; IDXGIOutput* output; IDXGIAdapter* adapter; DXGI_MODE_DESC* displayModes; DXGI_ADAPTER_DESC adapterDesc; unsigned int modeCount = 0; unsigned int refreshNum = 0; unsigned int refreshDen = 0; //First, we need to get the monitors refresh rater result = CreateDXGIFactory(__uuidof(IDXGIFactory), (void**)&factory); //if(FAILED(result)) //{ //MemoryUtil::MessageBoxError(TEXT("InitDirectX"), 0, 0, TEXT("Failed to create DXGI factory\nError:\n%s"), DXGetErrorDescription(result)); //return false; //} /*//Create a graphics card adapter result = factory->EnumAdapters(0, &adapter); if(FAILED(result)) { MemoryUtil::MessageBoxError(TEXT("InitDirectX"), 0, 0, TEXT("Failed to get graphics adapters\nError:\n%s"), DXGetErrorDescription(result)); return false; } //Get the output result = adapter->EnumOutputs(0, &output); if(FAILED(result)) { MemoryUtil::MessageBoxError(TEXT("InitDirectX"), 0, 0, TEXT("Failed to get adapter output\nError:\n%s"), DXGetErrorDescription(result)); return false; } //Get the modes result = output->GetDisplayModeList(DXGI_FORMAT_R8G8B8A8_UNORM, DXGI_ENUM_MODES_INTERLACED, &modeCount, 0); if(FAILED(result)) { MemoryUtil::MessageBoxError(TEXT("InitDirectX"), 0, 0, TEXT("Failed to get mode count\nError:\n%s"), DXGetErrorDescription(result)); return false; } displayModes = new DXGI_MODE_DESC[modeCount]; result = output->GetDisplayModeList(DXGI_FORMAT_R8G8B8A8_UNORM, DXGI_ENUM_MODES_INTERLACED, &modeCount, displayModes); if(FAILED(result)) { MemoryUtil::MessageBoxError(TEXT("InitDirectX"), 0, 0, TEXT("Failed to get display modes\nError:\n%s"), DXGetErrorDescription(result)); return false; } //Now we need to find one for our screen size for(unsigned int i = 0; i < modeCount; i++) { if(displayModes[i].Width == (unsigned int)width) { if(displayModes[i].Height == (unsigned int)height) { refreshNum = displayModes[i].RefreshRate.Numerator; refreshDen = displayModes[i].RefreshRate.Denominator; break; } } } //Store the video card data result = adapter->GetDesc(&adapterDesc); if(FAILED(result)) { MemoryUtil::MessageBoxError(TEXT("InitDirectX"), 0, 0, TEXT("Failed to get adapter description\nError:\n%s"), DXGetErrorDescription(result)); return false; } m_videoCard = new CVideoCard(); MemoryUtil::CreateGameObject(m_videoCard); m_videoCard->VideoCardMemory = (unsigned int)(adapterDesc.DedicatedVideoMemory); wcstombs_s(0, m_videoCard->VideoCardDescription, 128, adapterDesc.Description, 128);*/ //ReleaseCOM(output); //ReleaseCOM(adapter); ReleaseCOM(factory); //DeletePointerArray(displayModes); return true; } Also, I don't know if this means anything, but this is some of the output log when the function is commented out: //... 'LostRock.exe': Loaded 'C:\Windows\SysWOW64\msvcr100d.dll', Symbols loaded. 'LostRock.exe': Loaded 'C:\Windows\SysWOW64\imm32.dll', Cannot find or open the PDB file 'LostRock.exe': Loaded 'C:\Windows\SysWOW64\msctf.dll', Cannot find or open the PDB file 'LostRock.exe': Loaded 'C:\Windows\SysWOW64\uxtheme.dll', Cannot find or open the PDB file 'LostRock.exe': Loaded 'C:\Program Files (x86)\Common Files\microsoft shared\ink\tiptsf.dll', Cannot find or open the PDB file 'LostRock.exe': Loaded 'C:\Windows\SysWOW64\ole32.dll', Cannot find or open the PDB file 'LostRock.exe': Loaded 'C:\Windows\SysWOW64\oleaut32.dll', Cannot find or open the PDB file 'LostRock.exe': Loaded 'C:\Windows\SysWOW64\clbcatq.dll', Cannot find or open the PDB file 'LostRock.exe': Loaded 'C:\Windows\SysWOW64\oleacc.dll', Cannot find or open the PDB file The program '[6560] LostRock.exe: Native' has exited with code 0 (0x0). And when it isn't commented out... //... 'LostRock.exe': Loaded 'C:\Windows\SysWOW64\cfgmgr32.dll', Cannot find or open the PDB file 'LostRock.exe': Loaded 'C:\Windows\SysWOW64\devobj.dll', Cannot find or open the PDB file 'LostRock.exe': Loaded 'C:\Windows\SysWOW64\wintrust.dll', Cannot find or open the PDB file 'LostRock.exe': Loaded 'C:\Windows\SysWOW64\crypt32.dll', Cannot find or open the PDB file 'LostRock.exe': Loaded 'C:\Windows\SysWOW64\msasn1.dll', Cannot find or open the PDB file 'LostRock.exe': Unloaded 'C:\Windows\SysWOW64\setupapi.dll' 'LostRock.exe': Unloaded 'C:\Windows\SysWOW64\devobj.dll' 'LostRock.exe': Unloaded 'C:\Windows\SysWOW64\cfgmgr32.dll' 'LostRock.exe': Loaded 'C:\Windows\SysWOW64\clbcatq.dll', Cannot find or open the PDB file 'LostRock.exe': Loaded 'C:\Windows\SysWOW64\oleacc.dll', Cannot find or open the PDB file The thread 'Win32 Thread' (0xb94) has exited with code 0 (0x0). The program '[8096] LostRock.exe: Native' has exited with code 0 (0x0). //This is called when I click "Stop Debugging" P.S. I know it is CreateDXGIFactory because if I comment it out, the program exits correctly.

  Read the article

• Microsoft Forcing Dev/Partners Hands on Win 8 Through Certification

  - by D'Arcy Lussier

  I remember 2.5 years ago when Microsoft dropped a bomb on the Microsoft Partner community: all Gold competencies would require .NET 4 based premiere certifications (MCPD). Problem was, this gave a window of about 6 months for partners to update their employees’ certifications. At the place I was working, I put together an aggressive plan and we were able to attain the certs needed. Microsoft is always open that the certification requirements will change as the industry changes. .NET 1.0 certifications are useless here in 2012, and rightfully so they’ve been retired for a long time now. But now we’re seeing a new tactic by Microsoft – shifting gears away from certifications that speak to what industry needs and more to the Windows 8 agenda. Consider that currently the premiere development certification is the Microsoft Certified Professional Developer, which comes in three flavours – Web, Windows, and Azure. All require WCF and Data Access exams, as well as one that deals with the associated base technologies (ASP.NET, WinForms/WPF, Azure), and one that ties all three together in a solution-based exam. For Microsoft-based organizations, these skills aren’t just valid but necessary in building Microsoft applications. But the MCPD is being replaced with our old friend Microsoft Certified Solutions Developer (MCSD). So far, Microsoft has only released two types of MCSD – Web and Windows Store Apps. Windows Store Apps?! In a push to move developers to create WinRT-based applications, desktop development is now considered a second-class citizen in the eyes of Redmond. Also interesting are the language options for the exams: HTML5 and C#. Sorry VB folks, its time to embrace curly braces whether they be JavaScript or C#. Consider too the skills being assessed for the Windows Store Apps: Get your MCSD: Windows Store Apps Using HTML5 Get your MCSD: Windows Store Apps Using C# *Image Source: http://www.microsoft.com/learning/en/us/certification/mcsd-windows-store-apps.aspx Nov 21/2012 If you look at the skills being tested in each exam, you’ll find that skills like WCF and Data Access are downplayed compared to things like integrating Charms, facilitating Search, programming for the microphone and camera – all very Windows 8 focussed items. Where this becomes maddening is that Microsoft is still pushing Windows 7 with enterprise clients. According to a ZDNet article, Microsoft wants to see Windows 7 on 70% of enterprise desktops by mid 2013. Assuming they somehow meet that (its a pretty lofty goal), there’s years of traditional desktop-based development that will still be required at some level. For those thinking they’ll just write and stick with the MCPD certification, note that most exams that go towards that certification will be retired at the end of July 2013! (Read the small print). And while details haven’t been finalized, its a safe bet that MCPD certifications eventually won’t count towards Gold-level competencies in the Microsoft Partner program. What this means for Microsoft Partners and Developers is that certification for desktop development is going to be limited to Windows Store Apps unless Microsoft re-introduces a traditional desktop (WPF) based MCSD cert. Web Application Development – It’s Not All Bad There’s big changes on the web side of certification, but I actually see these changes as being for the good! Check out the new exam requirements for MCSD – Web Applications: Get your MCSD: Web Applications certification *Image Source: http://www.microsoft.com/learning/en/us/certification/cert-mcsd-web-applications.aspx Nov 21, 2012 We now *start* with HTML5, JavaScript, and CSS3! Now I’m sure that these will be slanted towards web development in IE, and I can hear designers everywhere bemoaning the CSS/IE combination. Still, I applaud Microsoft for adopting HTML5 as the go-to web technology and requiring certified developers to prove they have skills in the basics of web dev. The fact that the second exam clearly states “MVC Web Applications” shows that Web Forms is truly legacy and deprecated. That’s not to say there aren’t those out there that are still supporting or (for whatever reason) doing new dev with Web Forms, but this move by Microsoft is telling the community they better get on the MVC bandwagon if they want to stay current. Fantastic! And of course Azure needs to be here as well, and this is where the Microsoft agenda fits in. It’s no secret that there’s been a huge push in getting developers on to Azure. I don’t see this as being a bad thing either, as cloud computing (whether Azure, private, or 3rd party) is a necessary skill for developers to have here in 2012. The cynic in me realizes that the HTML5/JavaScript/CSS push wouldn’t be as prominent though if not for the Windows 8 Store App play, where HTML5 is a first class citizen (and an available language for the MCSD Windows Store App cert). In this case, the desktop developers loss is the web developers gain. Get Ready for Changes In addition to the changes in certifications, the Microsoft Partner competencies are going through changes as well. Web and Software Development are being merged into a single competency, meaning that licenses you would have received from having both as Gold are reduced. Other competencies are either being removed or changed, as are the exam requirements. In the same way that we’re seeing faster release cycles from Microsoft, so too will we see the Microsoft Partner Program and MS Certifications evolve faster than ever before. Many of us got caught in the last wave of changes, but this time we can see the wave coming – and it looks pretty big!

  Read the article

• OpenGL (glx) not working with ubuntu 12.10

  - by user26766

  It all started when I installed nvidia's own (download from website) driver. Uninstalling it and reverting back to nvidia-current didn't solve the problem, so I have been playing with this for a while. It seems glx support is missing, and my intel graphics is not responding. gnome loads only in fallback mode. Here are some outputs: glxinfo name of display: :0.0 Error: couldn't find RGB GLX visual or fbconfig glxgears Error: couldn't get an RGB, Double-buffered visual optirun glxgears works fine lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 540M] (rev ff) Here's the content of log file when just after running glxinfo: less /var/log/Xorg.0.log | grep gl [ 112.156] (II) LoadModule: "glx" [ 112.157] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 112.157] (II) Module glx: vendor="X.Org Foundation" [ 112.157] (II) UnloadModule: "glx" [ 112.157] (II) Unloading glx [ 112.157] (EE) Failed to load module "glx" (module requirement mismatch, 0) Some more info... lsmod Module Size Used by bbswitch 13612 0 pci_stub 12623 1 vboxpci 23195 0 vboxnetadp 25671 0 vboxnetflt 23480 0 vboxdrv 320372 3 vboxpci,vboxnetadp,vboxnetflt parport_pc 32689 0 ppdev 17074 0 bnep 18141 2 rfcomm 46620 12 binfmt_misc 17501 1 snd_hda_codec_hdmi 32049 1 snd_hda_codec_realtek 78147 1 joydev 17458 0 uvcvideo 76750 0 videobuf2_core 32852 1 uvcvideo videodev 120310 2 uvcvideo,videobuf2_core videobuf2_vmalloc 12861 1 uvcvideo videobuf2_memops 13405 1 videobuf2_vmalloc snd_hda_intel 33492 3 coretemp 13401 0 kvm_intel 132760 0 arc4 12530 2 snd_hda_codec 134213 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel kvm 414111 1 kvm_intel iwlwifi 386837 0 i915 520799 2 snd_hwdep 17699 1 snd_hda_codec snd_pcm 96668 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec psmouse 100389 0 drm_kms_helper 49113 1 i915 ghash_clmulni_intel 13221 0 snd_seq_midi 13325 0 snd_rawmidi 30513 1 snd_seq_midi btusb 22475 0 drm 288436 3 i915,drm_kms_helper serio_raw 13216 0 snd_seq_midi_event 14900 1 snd_seq_midi snd_seq 61555 2 snd_seq_midi,snd_seq_midi_event mac80211 535936 1 iwlwifi bluetooth 209249 22 bnep,rfcomm,btusb snd_timer 29426 2 snd_pcm,snd_seq snd_seq_device 14498 3 snd_seq_midi,snd_rawmidi,snd_seq snd 78921 16 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device cfg80211 206797 2 iwlwifi,mac80211 aesni_intel 51038 1 cryptd 20404 2 ghash_clmulni_intel,aesni_intel aes_x86_64 17256 1 aesni_intel dell_wmi 12682 0 sparse_keymap 13891 1 dell_wmi dcdbas 14439 0 i2c_algo_bit 13414 1 i915 microcode 22804 0 lpc_ich 17062 0 soundcore 15048 1 snd snd_page_alloc 18485 2 snd_hda_intel,snd_pcm video 19391 1 i915 mac_hid 13206 0 wmi 19071 1 dell_wmi mei 40691 0 lp 17760 0 parport 46346 3 parport_pc,ppdev,lp ahci 25721 3 libahci 31192 1 ahci atl1c 41102 0 how can I fix this? any ideas? Here is another thing I've tried: sudo apt-get purge nvidia* sudo reboot sudo apt-get install bumblebee bumblebee-nvidia didn't make any difference. The most relevant post I found on the web was this: http://ubuntuforums.org/archive/index.php/t-1722306.html Here it's explained that the problem is with the priority of shared libraries that are loaded for glxinfo. Here's what I get when I look up the libraries: linux-vdso.so.1 => (0x00007fff6bf8b000) libGL.so.1 => /usr/lib/x86_64-linux-gnu/mesa/libGL.so.1 (0x00007f22d6ccd000) libX11.so.6 => /usr/lib/x86_64-linux-gnu/libX11.so.6 (0x00007f22d6993000) libc.so.6 => /lib/x86_64-linux-gnu/libc.so.6 (0x00007f22d65d3000) libglapi.so.0 => /usr/lib/x86_64-linux-gnu/libglapi.so.0 (0x00007f22d63ad000) libXext.so.6 => /usr/lib/x86_64-linux-gnu/libXext.so.6 (0x00007f22d619b000) libXdamage.so.1 => /usr/lib/x86_64-linux-gnu/libXdamage.so.1 (0x00007f22d5f97000) libXfixes.so.3 => /usr/lib/x86_64-linux-gnu/libXfixes.so.3 (0x00007f22d5d91000) libX11-xcb.so.1 => /usr/lib/x86_64-linux-gnu/libX11-xcb.so.1 (0x00007f22d5b8f000) libxcb-glx.so.0 => /usr/lib/x86_64-linux-gnu/libxcb-glx.so.0 (0x00007f22d5977000) libxcb.so.1 => /usr/lib/x86_64-linux-gnu/libxcb.so.1 (0x00007f22d5759000) libXxf86vm.so.1 => /usr/lib/x86_64-linux-gnu/libXxf86vm.so.1 (0x00007f22d5553000) libdrm.so.2 => /usr/lib/x86_64-linux-gnu/libdrm.so.2 (0x00007f22d5346000) libpthread.so.0 => /lib/x86_64-linux-gnu/libpthread.so.0 (0x00007f22d5129000) libdl.so.2 => /lib/x86_64-linux-gnu/libdl.so.2 (0x00007f22d4f25000) /lib64/ld-linux-x86-64.so.2 (0x00007f22d6f54000) libXau.so.6 => /usr/lib/x86_64-linux-gnu/libXau.so.6 (0x00007f22d4d20000) libXdmcp.so.6 => /usr/lib/x86_64-linux-gnu/libXdmcp.so.6 (0x00007f22d4b1a000) librt.so.1 => /lib/x86_64-linux-gnu/librt.so.1 (0x00007f22d4911000) It seems "mesa" instead of nvidia-current is being used. However I didn't find any obvious link to /lib/nvidia-current in /etc/ld.so.conf (where the directories containing the shared libraries are listed). I don't know if there's anything missing or if this is normal. thanks, UPDATE: The problem was solved by updating to Ubuntu 13.04. It seems bumblebee was to blame, but I'm not sure what was going wrong...

  Read the article

• Dealing with "I-am-cool-and-you-are-dumb" manager [closed]

  - by Software Guy

  I have been working with a software company for about 6 months now. I like the projects I work on there and I really like all the people there except for 1 guy. That guy is technically smart, and he is a co-founder of the company. He is an okay guy in person (the kind you wouldn't want to care about much) but things get tricky when he is your manager. In general I am all okay but there are times when I feel I am not being treated fairly: He doesn't give much thought to when he makes mistakes and when I do something similar, he is super critical. Recently he went as far as to say "I am not sure if I can trust you with this feature". The detais of this specific case are this: I was working on this feature, and I was already a couple of hours over my normal working hours, and then I decided to stop and continue tomorrow. We use git, and I like to commit changes locally and only push when I feel they are ready. This manager insists that I push all the changes to the central repo (in case my hard drive crashes). So I push the change, and the ticket is marked as "to be tested". Next day I come in, he sits next to me and starts complaining and says that I posted above. I really didn't know what to say, I tried to explain to him that the ticket is still being worked upon but he didn't seem to listen. He interrupts me in-between when I am coding, which I do not mind, but when I do that same, his face turns like this :| and reacts as if his work was super important and I am just wasting his time. He asks me to accumulate all questions, and then ask him altogether which is not always possible, as you need a clarification before you can continue on a feature implementation. And when I am coding, he talks on the phone with his customers next to me (when he can go to the meeting room with his laptop) and doesn't care. He made me switch to a whole new IDE (from Netbeans to a commercial IDE costing a lot of money) for a really tiny feature (which I later found out was in Netbeans as well!). I didn't make a big deal out of it as I am equally comfortable working with this new IDE, but I couldn't get the science behind his obsession. He said this feature makes sure that if any method is updated by a programmer, the IDE will turn the method name to red in places where it is used. I told him that I do not have a problem since I always search for method usage in the project and make sure its updated. IDEs even have refactoring features for exactly that, but... I recently implemented a feature for a project, and I was happy about it and considering him a senior, I asked him his comments about the implementation quality.. he thought long and hard, made a few funny faces, and when he couldn't find anything, he said "ummm, your program will crash if JS is disabled" - he was wrong, since I had made sure it would work fine with default values even if JS was disabled. I told him that and then he said "oh okay". BUT, the funny thing is, a few days back, he implemented something and I objected with "But that would not run if JS is disabled" and his response was "We don't have to care about people who disable JS" :-/ Once he asked me to investigate if there was a way to modify a CMS generated menu programmatically by extending the CMS, I did my research and told him that the only was is to inject a menu item using JavaScript / jQuery and his reaction was "ah that's ugly, and hacky, not acceptable" and two days later, I see that feature implemented in the same way as I had suggested. The point is, his reaction was not respectful at all, even if what I proposed was hacky, he should be respectful, that I know what's hacky and if I am suggesting something hacky, there must be a reason for it. There are plenty of other reasons / examples where I feel I am not being treated fairly. I want your advice as to what is it that I am doing wrong and how to deal with such a situation. The other guys in the team are actually very good people, and I do not want to leave the job either (although I could, if I want to). All I want is respect and equal treatment. I have thought about talking to this guy in a face to face meeting, but that worries me that his attitude might get worse and make things more difficult for me (since he doesn't seem to be the guy who thinks he can be wrong too). I am also considering talking to the other co-founder but I am not sure how he will take it (as both founders have been friends forever). Thanks for reading the long message, I really appreciate your help.

  Read the article

• Ransomware: Why This New Malware is So Dangerous and How to Protect Yourself

  - by Chris Hoffman

  Ransomware is a type of malware that tries to extort money from you. One of the nastiest examples, CryptoLocker, takes your files hostage and holds them for ransom, forcing you to pay hundreds of dollars to regain access. Most malware is no longer created by bored teenagers looking to cause some chaos. Much of the current malware is now produced by organized crime for profit and is becoming increasingly sophisticated. How Ransomware Works Not all ransomware is identical. The key thing that makes a piece of malware “ransomware” is that it attempts to extort a direct payment from you. Some ransomware may be disguised. It may function as “scareware,” displaying a pop-up that says something like “Your computer is infected, purchase this product to fix the infection” or “Your computer has been used to download illegal files, pay a fine to continue using your computer.” In other situations, ransomware may be more up-front. It may hook deep into your system, displaying a message saying that it will only go away when you pay money to the ransomware’s creators. This type of malware could be bypassed via malware removal tools or just by reinstalling Windows. Unfortunately, Ransomware is becoming more and more sophisticated. One of the latest examples, CryptoLocker, starts encrypting your personal files as soon as it gains access to your system, preventing access to the files without knowing the encryption key. CryptoLocker then displays a message informing you that your files have been locked with encryption and that you have just a few days to pay up. If you pay them $300, they’ll hand you the encryption key and you can recover your files. CryptoLocker helpfully walks you through choosing a payment method and, after paying, the criminals seem to actually give you a key that you can use to restore your files. You can never be sure that the criminals will keep their end of the deal, of course. It’s not a good idea to pay up when you’re extorted by criminals. On the other hand, businesses that lose their only copy of business-critical data may be tempted to take the risk — and it’s hard to blame them. Protecting Your Files From Ransomware This type of malware is another good example of why backups are essential. You should regularly back up files to an external hard drive or a remote file storage server. If all your copies of your files are on your computer, malware that infects your computer could encrypt them all and restrict access — or even delete them entirely. When backing up files, be sure to back up your personal files to a location where they can’t be written to or erased. For example, place them on a removable hard drive or upload them to a remote backup service like CrashPlan that would allow you to revert to previous versions of files. Don’t just store your backups on an internal hard drive or network share you have write access to. The ransomware could encrypt the files on your connected backup drive or on your network share if you have full write access. Frequent backups are also important. You wouldn’t want to lose a week’s worth of work because you only back up your files every week. This is part of the reason why automated back-up solutions are so convenient. If your files do become locked by ransomware and you don’t have the appropriate backups, you can try recovering them with ShadowExplorer. This tool accesses “Shadow Copies,” which Windows uses for System Restore — they will often contain some personal files. How to Avoid Ransomware Aside from using a proper backup strategy, you can avoid ransomware in the same way you avoid other forms of malware. CryptoLocker has been verified to arrive through email attachments, via the Java plug-in, and installed on computers that are part of the Zeus botnet. Use a good antivirus product that will attempt to stop ransomware in its tracks. Antivirus programs are never perfect and you could be infected even if you run one, but it’s an important layer of defense. Avoid running suspicious files. Ransomware can arrive in .exe files attached to emails, from illicit websites containing pirated software, or anywhere else that malware comes from. Be alert and exercise caution over the files you download and run. Keep your software updated. Using an old version of your web browser, operating system, or a browser plugin can allow malware in through open security holes. If you have Java installed, you should probably uninstall it. For more tips, read our list of important security practices you should be following. Ransomware — CryptoLocker in particular — is brutally efficient and smart. It just wants to get down to business and take your money. Holding your files hostage is an effective way to prevent removal by antivirus programs after it’s taken root, but CryptoLocker is much less scary if you have good backups. This sort of malware demonstrates the importance of backups as well as proper security practices. Unfortunately, CryptoLocker is probably a sign of things to come — it’s the kind of malware we’ll likely be seeing more of in the future.     

  Read the article

• XmlWriter and lower ASCII characters

  - by Rick Strahl

  Ran into an interesting problem today on my CodePaste.net site: The main RSS and ATOM feeds on the site were broken because one code snippet on the site contained a lower ASCII character (CHR(3)). I don't think this was done on purpose but it was enough to make the feeds fail. After quite a bit of debugging and throwing in a custom error handler into my actual feed generation code that just spit out the raw error instead of running it through the ASP.NET MVC and my own error pipeline I found the actual error. The lovely base exception and error trace I got looked like this: Error: '', hexadecimal value 0x03, is an invalid character. at System.Xml.XmlUtf8RawTextWriter.InvalidXmlChar(Int32 ch, Byte* pDst, Boolean entitize)at System.Xml.XmlUtf8RawTextWriter.WriteElementTextBlock(Char* pSrc, Char* pSrcEnd)at System.Xml.XmlUtf8RawTextWriter.WriteString(String text)at System.Xml.XmlWellFormedWriter.WriteString(String text)at System.Xml.XmlWriter.WriteElementString(String localName, String ns, String value)at System.ServiceModel.Syndication.Rss20FeedFormatter.WriteItemContents(XmlWriter writer, SyndicationItem item, Uri feedBaseUri)at System.ServiceModel.Syndication.Rss20FeedFormatter.WriteItem(XmlWriter writer, SyndicationItem item, Uri feedBaseUri)at System.ServiceModel.Syndication.Rss20FeedFormatter.WriteItems(XmlWriter writer, IEnumerable`1 items, Uri feedBaseUri)at System.ServiceModel.Syndication.Rss20FeedFormatter.WriteFeed(XmlWriter writer)at System.ServiceModel.Syndication.Rss20FeedFormatter.WriteTo(XmlWriter writer)at CodePasteMvc.Controllers.ApiControllerBase.GetFeed(Object instance) in C:\Projects2010\CodePaste\CodePasteMvc\Controllers\ApiControllerBase.cs:line 131 XML doesn't like extended ASCII Characters It turns out the issue is that XML in general does not deal well with lower ASCII characters. According to the XML spec it looks like any characters below 0x09 are invalid. If you generate an XML document in .NET with an embedded &#x3; entity (as mine did to create the error above), you tend to get an XML document error when displaying it in a viewer. For example, here's what the result of my  feed output looks like with the invalid character embedded inside of Chrome which displays RSS feeds as raw XML by default: Other browsers show similar error messages. The nice thing about Chrome is that you can actually view source and jump down to see the line that causes the error which allowed me to track down the actual message that failed. If you create an XML document that contains a 0x03 character the XML writer fails outright with the error: '', hexadecimal value 0x03, is an invalid character. The good news is that this behavior is overridable so XML output can at least be created by using the XmlSettings object when configuring the XmlWriter instance. In my RSS configuration code this looks something like this:MemoryStream ms = new MemoryStream(); var settings = new XmlWriterSettings() { CheckCharacters = false }; XmlWriter writer = XmlWriter.Create(ms,settings); and voila the feed now generates. Now generally this is probably NOT a good idea, because as mentioned above these characters are illegal and if you view a raw XML document you'll get validation errors. Luckily though most RSS feed readers however don't care and happily accept and display the feed correctly, which is good because it got me over an embarrassing hump until I figured out a better solution. How to handle extended Characters? I was glad to get the feed fixed for the time being, but now I was still stuck with an interesting dilemma. CodePaste.net accepts user input for code snippets and those code snippets can contain just about anything. This means that ASP.NET's standard request filtering cannot be applied to this content. The code content displayed is encoded before display so for the HTML end the CHR(3) input is not really an issue. While invisible characters are hardly useful in user input it's not uncommon that odd characters show up in code snippets. You know the old fat fingering that happens when you're in the middle of a coding session and those invisible characters do end up sometimes in code editors and then end up pasted into the HTML textbox for pasting as a Codepaste.net snippet. The question is how to filter this text? Looking back at the XML Charset Spec it looks like all characters below 0x20 (space) except for 0x09 (tab), 0x0A (LF), 0x0D (CR) are illegal. So applying the following filter with a RegEx should work to remove invalid characters:string code = Regex.Replace(item.Code, @"[\u0000-\u0008,\u000B,\u000C,\u000E-\u001F]", ""); Applying this RegEx to the code snippet (and title) eliminates the problems and the feed renders cleanly.© Rick Strahl, West Wind Technologies, 2005-2012Posted in .NET  XML   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• SQL SERVER – ?Finding Out What Changed in a Deleted Database – Notes from the Field #041

  - by Pinal Dave

  [Note from Pinal]: This is a 41th episode of Notes from the Field series. The real world is full of challenges. When we are reading theory or book, we sometimes do not realize how real world reacts works and that is why we have the series notes from the field, which is extremely popular with developers and DBA. Let us talk about interesting problem of how to figure out what has changed in the DELETED database. Well, you think I am just throwing the words but in reality this kind of problems are making our DBA’s life interesting and in this blog post we have amazing story from Brian Kelley about the same subject. In this episode of the Notes from the Field series database expert Brian Kelley explains a how to find out what has changed in deleted database. Read the experience of Brian in his own words. Sometimes, one of the hardest questions to answer is, “What changed?” A similar question is, “Did anything change other than what we expected to change?” The First Place to Check – Schema Changes History Report: Pinal has recently written on the Schema Changes History report and its requirement for the Default Trace to be enabled. This is always the first place I look when I am trying to answer these questions. There are a couple of obvious limitations with the Schema Changes History report. First, while it reports what changed, when it changed, and who changed it, other than the base DDL operation (CREATE, ALTER, DELETE), it does not present what the changes actually were. This is not something covered by the default trace. Second, the default trace has a fixed size. When it hits that size, the changes begin to overwrite. As a result, if you wait too long, especially on a busy database server, you may find your changes rolled off. But the Database Has Been Deleted! Pinal cited another issue, and that’s the inability to run the Schema Changes History report if the database has been dropped. Thankfully, all is not lost. One thing to remember is that the Schema Changes History report is ultimately driven by the Default Trace. As you may have guess, it’s a trace, like any other database trace. And the Default Trace does write to disk. The trace files are written to the defined LOG directory for that SQL Server instance and have a prefix of log_: Therefore, you can read the trace files like any other. Tip: Copy the files to a working directory. Otherwise, you may occasionally receive a file in use error. With the Default Trace files, if you ask the question early enough, you can see the information for a deleted database just the same as any other database. Testing with a Deleted Database: Here’s a short script that will create a database, create a schema, create an object, and then drop the database. Without the database, you can’t do a standard Schema Changes History report. CREATE DATABASE DeleteMe; GO USE DeleteMe; GO CREATE SCHEMA Test AUTHORIZATION dbo; GO CREATE TABLE Test.Foo (FooID INT); GO USE MASTER; GO DROP DATABASE DeleteMe; GO This sets up the perfect situation where we can’t retrieve the information using the Schema Changes History report but where it’s still available. Finding the Information: I’ve sorted the columns so I can see the Event Subclass, the Start Time, the Database Name, the Object Name, and the Object Type at the front, but otherwise, I’m just looking at the trace files using SQL Profiler. As you can see, the information is definitely there: Therefore, even in the case of a dropped/deleted database, you can still determine who did what and when. You can even determine who dropped the database (loginame is captured). The key is to get the default trace files in a timely manner in order to extract the information. If you want to get started with performance tuning and database security with the help of experts, read more over at Fix Your SQL Server. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: Notes from the Field, PostADay, SQL, SQL Authority, SQL Query, SQL Security, SQL Server, SQL Tips and Tricks, T SQL

  Read the article

• How customers view and interact with a company

  The Harvard Business Review article written by Rayport and Jaworski is aptly titled “Best Face Forward” because it sheds light on how customers view and interact with a company. In the past most business interaction between customers was performed in a face to face meeting where one party would present an item for sale and then the other would decide whether to purchase the item. In addition, if there was a problem with a purchased item then they would bring the item back to the person who sold the item for resolution. One of my earliest examples of witnessing this was when I was around 6 or 7 years old and I was allowed to spend the summer in Tennessee with my Grandparents. My Grandfather had just written a book about the local history of his town and was selling them to his friends and local bookstores. I still remember he offered to pay me a small commission for every book I helped him sell because I was carrying the books around for him. Every sale he made was face to face with his customers which allowed him to share his excitement for the book with everyone. In today’s modern world there is less and less human interaction as the use of computers and other technologies allow us to communicate within seconds even though both parties may be across the globe or just next door. That being said, customers view a company through multiple access points called faces that represent the ability to interact without actually seeing a human face. As a software engineer this is a good and a bad thing because direct human interaction and technology based interaction have both good and bad attributes based on the customer. How organizations coordinate business and IT functions, to provide quality service varies based on each individual business and the goals and directives put in place by its management. According to Rayport and Jaworski, the type of interaction used through a particular access point may lend itself to be people-dominate, machine-dominate, or a combination of both. The method by which a company communicates information through an access point is a strategic choice that relates costs and customer outcomes. To simplify this, the choice is based on what can give the customer the best experience interacting with the company when the cost of the interaction is also a factor. I personally see examples of this every day at work. The company website is machine-dominate with people updating and maintaining information, our groups department is people dominate because most of the customer interaction is done at the customers location and is backed up by machine based data sources, and our sales/member service department is a hybrid because employees work in tandem with machines in order for them to assist customers with signing up or any other issue they may have. The positive and negative aspects of human and machine interfaces are a key aspect in deciding which interface to use when allowing customers to access a company or a combination of the two. Rayport and Jaworski also used MIT professor Erik Brynjolfsson preliminary catalog of human and machine strengths. He stated that humans outperform machines in judgment, pattern recognition, exception processing, insight, and creativity. I have found this to be true based on the example of how sales and member service reps at my company handle a multitude of questions and various situations with a lot of unknown variables. A machine interface could never effectively be able to handle these scenarios because there are too many variables to consider and would not have the built-in logic to process each customer’s claims and needs. In addition, he also stated that machines outperform humans in collecting, storing, transmitting and routine processing. An example of this would be my employer’s website. Customers can simply go online and purchase a product without even talking to a sales or member services representative. The information is then stored in a database so that the customer can always go back and review there order, and access their selected services. A human, no matter how smart they are would never be able to keep track of hundreds of thousands of customers let alone know what they purchased or how much they paid. In today’s technology driven economy every company must offer their customers multiple methods of accessibly in order to survive. The more of an opportunity a company has to create a positive experience for their customers, in my opinion, they more likely the customer will return to that company again. I have noticed this with my personal shopping habits and experiences. References Rayport, J., & Jaworski, B. (2004). Best Face Forward. Harvard Business Review, 82(12), 47-58. Retrieved from Business Source Complete database.

  Read the article

• Modularity through HTTP

  - by Michael Williamson

  As programmers, we strive for modularity in the code we write. We hope that splitting the problem up makes it easier to solve, and allows us to reuse parts of our code in other applications. Object-orientation is the most obvious of many attempts to get us closer to this ideal, and yet one of the most successful approaches is almost accidental: the web. Programming languages provide us with functions and classes, and plenty of other ways to modularize our code. This allows us to take our large problem, split it into small parts, and solve those small parts without having to worry about the whole. It also makes it easier to reason about our code. So far, so good, but now that we’ve written our small, independent module, for example to send out e-mails to my customers, we’d like to reuse it in another application. By creating DLLs, JARs or our platform’s package container of choice, we can do just that – provided our new application is on the same platform. Want to use a Java library from C#? Well, good luck – it might be possible, but it’s not going to be smooth sailing. Even if a library exists, it doesn’t mean that using it going to be a pleasant experience. Say I want to use Java to write out an XML document to an output stream. You’d imagine this would be a simple one-liner. You’d be wrong: import org.w3c.dom.*; import java.io.*; import javax.xml.transform.*; import javax.xml.transform.dom.*; import javax.xml.transform.stream.*; private static final void writeDoc(Document doc, OutputStream out) throws IOException { try { Transformer t = TransformerFactory.newInstance().newTransformer(); t.setOutputProperty(OutputKeys.DOCTYPE_SYSTEM, doc.getDoctype().getSystemId()); t.transform(new DOMSource(doc), new StreamResult(out)); } catch (TransformerException e) { throw new AssertionError(e); // Can't happen! } } Most of the time, there is a good chance somebody else has written the code before, but if nobody can understand the interface to that code, nobody’s going to use it. The result is that most of the code we write is just a variation on a theme. Despite our best efforts, we’ve fallen a little short of our ideal, but the web brings us closer. If we want to send e-mails to our customers, we could write an e-mail-sending library. More likely, we’d use an existing one for our language. Even then, we probably wouldn’t have niceties like A/B testing or DKIM signing. Alternatively, we could just fire some HTTP requests at MailChimp, and get a whole slew of features without getting anywhere near the code that implements them. The web is inherently language agnostic. So long as your language can send and receive text over HTTP, and probably parse some JSON, you’re about as well equipped as anybody. Instead of building libraries for a specific language, we can build a service that almost every language can reuse. The text-based nature of HTTP also helps to limit the complexity of the API. As SOAP will attest, you can still make a horrible mess using HTTP, but at least it is an obvious horrible mess. Complex data structures are tedious to marshal to and from text, providing a strong incentive to keep things simple. By contrast, spotting the complexities in a class hierarchy is often not as easy. HTTP doesn’t solve every problem. It probably isn’t such a good idea to use it inside an inner loop that’s executed thousands of times per second. What’s more, the HTTP approach might introduce some new problems. We often need to add a thin shim to each application that we wish to communicate over HTTP. For instance, we might need to write a small plugin in PHP if we want to integrate WordPress into our system. Suddenly, instead of a system written in one language, we’re maintaining a system with several distinct languages and platforms. Even then, we should strive to avoid re-implementing the same old thing. As programmers, we consistently underestimate both the cost of building a system and the ongoing maintenance. If we allow ourselves to integrate existing applications, even if they’re in unfamiliar languages, we save ourselves those development and maintenance costs, as well as being able to pick the best solution for our problem. Thanks to the web, HTTP is often the easiest way to get there.

  Read the article

• Vendors: Partners or Salespeople?

  - by BuckWoody

  I got a great e-mail from a friend that asked about how he could foster a better relationship with his vendors. So many times when you work with a vendor it’s more of a used-car sales experience than a partnership – but you can actually make your vendor more of a partner, as long as you both set some ground-rules at the start. Sit down with your vendor, and have a heart-to-heart talk with them, explain that they won’t win every time, but that you’re willing to work with them in an honest way on both sides. Here’s the advice I sent him verbatim. I hope this post generates lots of comments from both customers and vendors. I don’t expect that you’ve had a great experience with your Microsoft reps, but I happen to work with some of the best sales teams in the business, and our clients tell us that all the time. “The key to this relationship is to keep the audience really small. Ideally there should be one person from your side that is responsible for the relationship, and one from the vendor’s side. Each responsible person should have the authority to make decisions, and to bring in other folks as needed for a given topic, project or decision.   For Microsoft, this is called an “Account Manager” – they aren’t technical, they aren’t sales. They “own” a relationship with a company. They learn what the company does, who does it, and how. They are responsible to understand what the challenges in your company are. While they don’t know the bits and bytes of everything we sell, they know what each thing does, and who to talk to about it. I get a call from an Account Manager every week that has pre-digested an issue at an organization and says to me: “I need you to set up an architectural meeting with their technical staff to get a better read on how we can help with problem X.” I do that and then report back to the Account Manager what we learned.  All through this process there’s the atmosphere of a “team”, not a “sales opportunity” per se. I’ve even recommended that the firm use a rival product, and I’ve never gotten push-back on that decision from my Account Managers.   But that brings up an interesting point. Someone pays an Account Manager and pays me. They expect something in return. At some point, you have to buy something. Not every time, not every situation – sometimes it’s just helping you with what you already bought from us. But the point is that you can’t expect lots of love and never spend any money. That’s the way business works.   Finally, don’t view the vendor as someone with their hand in your pocket – somebody that’s just trying to sell you something and doesn’t care if they ever see you again – unless they deserve it. There are plenty of “love them and leave them” companies out there, and you may have even had this experience with us, but that isn’t the case in the firms I work with. In fact, my customers get a questionnaire that asks them that exact question. “How many times have you seen your account team? Did you like your interaction with them? Can they do better?” My raises, performance reviews and general standing in my group are based on the answers the company gives.  Ask your vendor if they measure their sales and support teams this way – if not, seek another vendor to partner with.   Partnering with someone is a big deal. It involves time and effort on your part, and on the vendor’s part. If either of you isn’t pulling your weight, it just won’t work. You have every right to expect them to treat you as a partner, and they have the same right for your side.” Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• 24 Hours of PASS – first reflections

  - by Rob Farley

  A few days after the end of 24HOP, I find myself reflecting on it. I’m still waiting on most of the information. I want to be able to discover things like where the countries represented on each of the sessions, and things like that. So far, I have the feedback scores and the numbers of attendees. The data was provided in a PDF, so while I wait for it to appear in a more flexible format, I’ve pushed the 24 attendee numbers into Excel. This chart shows the numbers by time. Remember that we started at midnight GMT, which was 10:30am in my part of the world and 8pm in New York. It’s probably no surprise that numbers drooped a bit at the start, stayed comparatively low, and then grew as the larger populations of the English-speaking world woke up. I remember last time 24HOP ran for 24 hours straight, there were quite a few sessions with less than 100 attendees. None this time though. We got close, but even when it was 4am in New York, 8am in London and 7pm in Sydney (which would have to be the worst slot for attracting people), we still had over 100 people tuning in. As expected numbers grew as the UK woke up, and even more so as the US did, with numbers peaking at 755 for the “3pm in New York” session on SQL Server Data Tools. Kendra Little almost reached those numbers too, and certainly contributed the biggest ‘spike’ on the chart with her session five hours earlier. Of all the sessions, Kendra had the highest proportion of ‘Excellent’s for the “Overall Evaluation of the session” question, and those of you who saw her probably won’t be surprised by that. Kendra had one of the best ranked sessions from the 24HOP event this time last year (narrowly missing out on being top 3), and she has produced a lot of good video content since then. The reports indicate that there were nearly 8.5 thousand attendees across the 24 sessions, averaging over 350 at each one. I’m looking forward to seeing how many different people that was, although I do know that Wil Sisney managed to attend every single one (if you did too, please let me know). Wil even moderated one of the sessions, which made his feat even greater. Thanks Wil. I also want to send massive thanks to Dave Dustin. Dave probably would have attended all of the sessions, if it weren’t for a power outage that forced him to take a break. He was also a moderator, and it was during this session that he earned special praise. Part way into the session he was moderating, the speaker lost connectivity and couldn’t get back for about fifteen minutes. That’s an incredibly long time when you’re in a live presentation. There were over 200 people tuned in at the time, and I’m sure Dave was as stressed as I was to have a speaker disappear. I started chasing down a phone number for the speaker, while Dave spoke to the audience. And he did brilliantly. He started answering questions, and kept doing that until the speaker came back. Bear in mind that Dave hadn’t expected to give a presentation on that topic (or any other), and was simply drawing on his SQL expertise to get him through. Also consider that this was between midnight at 1am in Dave’s part of the world (Auckland, NZ). I would’ve been expecting just to welcome people, monitor questions, probably read some out, and in general, help make things run smoothly. He went far beyond the call of duty, and if I had a medal to give him, he’d definitely be getting one. On the whole, I think this 24HOP was a success. We tried a different platform, and I think for the most part it was a popular move. We didn’t ask the question “Was this better than LiveMeeting?”, but we did get a number of people telling us that they thought the platform was very good. Some people have told me I get a chance to put my feet up now that this is over. As I’m also co-ordinating a tour of SQLSaturday events across the Australia/New Zealand region, I don’t quite get to take that much of a break (plus, there’s the little thing of squeezing in seven SQL 2012 exams over the next 2.5 weeks). But I am pleased to be reflecting on this event rather than anticipating it. There were a number of factors that could have gone badly, but on the whole I’m pleased about how it went. A massive thanks to everyone involved. If you’re reading this and thinking you wish you could’ve tuned in more, don’t worry – they were all recorded and you’ll be able to watch them on demand very soon. But as well as that, PASS has a stream of content produced by the Virtual Chapters, so you can keep learning from the comfort of your desk all year round. More info on them at sqlpass.org, of course.

  Read the article

• Updates broke my themes/shell [Ubuntu 12.04 running Gnome 3 ]

  - by APNW

  I am running gnome-session 3.4.2.1. After the latest updates (listed below) my theme regressed to what looks like tango - not sure. Am unable to change it using Gnome-tweak tool or the display settings. I am also unable to change the wallpaper. Here's what it looks like: Synaptic: Chromium and this is the wallpaper page even though I have selected the wallpaper, it actually does not change. This same problem occurred on my personal computer, and one other computer I have, all running the same software/config. The interesting thing is that while Gnome 3 and Unity are affected, Cinnamon is not. What I've done so far: purged and re-installed both gnome 3 and Unity- no change noted. So, how do I fix this? Thanks Here's the installation log: Start-Date: 2013-11-07 12:01:28 Upgrade: chromium-browser-l10n:i386 (28.0.1500.71-0ubuntu1.12.04.1, 30.0.1599.114-0ubuntu0.12.04.3), libswscale2:i386 (0.8.6-0ubuntu0.12.04.1, 0.8.8-0ubuntu0.12.04.1), chromium-codecs-ffmpeg:i386 (28.0.1500.71-0ubuntu1.12.04.1, 30.0.1599.114-0ubuntu0.12.04.3), chromium-browser:i386 (28.0.1500.71-0ubuntu1.12.04.1, 30.0.1599.114-0ubuntu0.12.04.3), libpostproc52:i386 (0.8.6-0ubuntu0.12.04.1, 0.8.8-0ubuntu0.12.04.1), libavcodec-extra-53:i386 (0.8.6ubuntu0.12.04.1, 0.8.8ubuntu0.12.04.1), libavformat53:i386 (0.8.6-0ubuntu0.12.04.1, 0.8.8-0ubuntu0.12.04.1), libavutil-extra-51:i386 (0.8.6ubuntu0.12.04.1, 0.8.8ubuntu0.12.04.1) End-Date: 2013-11-07 12:02:00 Start-Date: 2013-11-07 17:32:55 Commandline: aptdaemon role='role-commit-packages' sender=':1.136' Install: libmusicbrainz5-0:i386 (5.0.1-2~precise2), udisks2:i386 (1.98.0-1~precise1), libclutter-gst-1.0-0:i386 (1.5.4-0ubuntu2), libudisks2-0:i386 (1.98.0-1~precise1), cinnamon-session-common:i386 (2.0.4-20131105043005-precise), librhythmbox-core6:i386 (2.97-1ubuntu1~precise1), gcr:i386 (3.4.1-3~precise1), libcluttergesture-0.0.2-0:i386 (0.0.2.1-2ubuntu3), libmx-1.0-2:i386 (1.4.3-0ubuntu1), guile-2.0-libs:i386 (2.0.5+1-1), libclutter-imcontext-0.1-0:i386 (0.1.4-2build1), libnatpmp1:i386 (20110808-3ubuntu1) Upgrade: gnome-keyring:i386 (3.2.2-2ubuntu4.1, 3.4.1-4ubuntu1~precise1), cinnamon:i386 (2.0.6-20131026040307-precise, 2.0.10-20131105040309-precise), gir1.2-muffin-3.0:i386 (2.0.3-20131023003029-precise, 2.0.3-20131105003012-precise), gir1.2-totem-1.0:i386 (3.0.1-0ubuntu21.1, 3.4.3-0ubuntu1~precise1), nemo:i386 (2.0.2-20131023010018-precise, 2.0.5-20131105010007-precise), aisleriot:i386 (3.2.3.2-0ubuntu1, 3.4.1-1~precise1), procps:i386 (3.2.8-11ubuntu6.2, 3.2.8-11ubuntu6.3), libcinnamon-desktop0:i386 (2.0.2-20131025011504-precise, 2.0.3-20131105011505-precise), libgck-1-0:i386 (3.2.2-2ubuntu4.1, 3.4.1-3~precise1), totem-plugins:i386 (3.0.1-0ubuntu21.1, 3.4.3-0ubuntu1~precise1), cinnamon-desktop-data:i386 (2.0.2-20131025011504-precise, 2.0.3-20131105011505-precise), rhythmbox:i386 (2.96-0ubuntu4.3, 2.97-1ubuntu1~precise1), libgcr-3-1:i386 (3.2.2-2ubuntu4.1, 3.4.1-3~precise1), seahorse:i386 (3.2.2-0ubuntu2.1, 3.4.1-2~precise1), muffin-common:i386 (2.0.3-20131023003029-precise, 2.0.3-20131105003012-precise), totem-common:i386 (3.0.1-0ubuntu21.1, 3.4.3-0ubuntu1~precise1), libtotem0:i386 (3.0.1-0ubuntu21.1, 3.4.3-0ubuntu1~precise1), rhythmbox-data:i386 (2.96-0ubuntu4.3, 2.97-1ubuntu1~precise1), gir1.2-cinnamondesktop-3.0:i386 (2.0.2-20131025011504-precise, 2.0.3-20131105011505-precise), cinnamon-session:i386 (2.0.1-20131021043004-precise, 2.0.4-20131105043005-precise), rhythmbox-mozilla:i386 (2.96-0ubuntu4.3, 2.97-1ubuntu1~precise1), rhythmbox-plugin-zeitgeist:i386 (2.96-0ubuntu4.3, 2.97-1ubuntu1~precise1), libmuffin0:i386 (2.0.3-20131023003029-precise, 2.0.3-20131105003012-precise), cjs:i386 (2.0.0-20131021020602-precise, 2.0.0-20131105020703-precise), rhythmbox-plugin-cdrecorder:i386 (2.96-0ubuntu4.3, 2.97-1ubuntu1~precise1), cinnamon-common:i386 (2.0.6-20131026040307-precise, 2.0.10-20131105040309-precise), gnome-disk-utility:i386 (3.0.2-2ubuntu7, 3.4.1-0ubuntu1~precise1), nemo-fileroller:i386 (2.0.0-20131021020004-precise, 2.0.0-20131105020003-precise), libnemo-extension1:i386 (2.0.2-20131023010018-precise, 2.0.5-20131105010007-precise), rhythmbox-plugins:i386 (2.96-0ubuntu4.3, 2.97-1ubuntu1~precise1), gimp:i386 (2.8.6-0precise1~ppa, 2.8.8-0precise0~ppa), cinnamon-settings-daemon:i386 (2.0.5-20131026004504-precise, 2.0.6-20131105004505-precise), libgimp2.0:i386 (2.8.6-0precise1~ppa, 2.8.8-0precise0~ppa), gir1.2-rb-3.0:i386 (2.96-0ubuntu4.3, 2.97-1ubuntu1~precise1), wpasupplicant:i386 (0.7.3-6ubuntu2.1, 0.7.3-6ubuntu2.2), libcjs0c:i386 (2.0.0-20131021020602-precise, 2.0.0-20131105020703-precise), nemo-data:i386 (2.0.2-20131023010018-precise, 2.0.5-20131105010007-precise), totem:i386 (3.0.1-0ubuntu21.1, 3.4.3-0ubuntu1~precise1), gimp-data:i386 (2.8.6-0precise1~ppa, 2.8.8-0precise0~ppa), transmission-common:i386 (2.51-0ubuntu1.3, 2.73-0ubuntu1~precise1), cinnamon-translations:i386 (2.0.1-20131021040407-precise, 2.0.1-20131105040807-precise), totem-mozilla:i386 (3.0.1-0ubuntu21.1, 3.4.3-0ubuntu1~precise1), rhythmbox-plugin-magnatune:i386 (2.96-0ubuntu4.3, 2.97-1ubuntu1~precise1), transmission-gtk:i386 (2.51-0ubuntu1.3, 2.73-0ubuntu1~precise1) End-Date: 2013-11-07 17:34:40

  Read the article

• Lazy HTML attributes wrapping in Internet Explorer

  - by AGS777

  Having encountered this Internet Explorer (all versions) behavior several times previously, I eventually decided to share this most probably useless knowledge. Excuse my lengthy explanations because I am going to show the behavior along with a very simple case when one can come across it inadvertently. Let's say I want to implement some simple templating solution in JavaScript. I wrote an HTML template with an intention to bind data to it on the client side: Please note, that name of the “sys-template” class is just a coincidence. I do not use any ASP.NET AJAX code in this simple example. As you can see we need to replace placeholders (property name wrapped with curly braces) with actual data. Also, as you can see, many of the placeholders are situated within attribute values and it is where the danger lies. I am going to use <a /> element HTML as a template and replace each placeholder pattern with respective properties’ values with a little bit of jQuery like this: You can find complete code along with the contextFormat() method definition at the end of the post. Let’s assume that value for the name property (that we want to put in the title attribute) of the first data item is “first tooltip”. So it consists of two words. When the replacement occurred, title attribute should contain the “first tooltip” text which we are going to see as a tooltip for the <a /> element. But let’s run the sample code in Internet Explorer and check it out. What you’ll see is that only the first word of the supposed “title” attribute’s content is shown. So, were is the rest of my attribute and what happened? The answer is obvious once you see the result of jQuery(“.sys-template”).html() line for the given HTML markup. In IE you’ll get the following <A id={id} class={cssClass} title={name} href="{source}" myAttr="{attr}">Link to {source}</A> See any difference between this HTML and the one shown earlier? No? Then look carefully. While the original HTML of the <a /> element is well-formed and all the attributes are correctly quoted, when you take the same HTML back in Internet Explorer (it doesn’t matter whether you use html() method from jQuery library or IE’s innerHTML directly), you lose attributes’ quotes for some of the attributes. Then, after replacement, we’ll get following HTML for our first data item. I marked the attribute value in question with italic: <A id=1 class=first title=first tooltip href="first.html" myAttr="firstAttr">Link to first.html</A> Now you can easily imagine for yourself what happens when this HTML is inserted into the document and why we do not see the second (and any subsequent words if any) of our title attribute in the tooltip. There are still two important things to note. The first one (and it actually the reason why I named the post “lazy wrapping” is that if value of the HTML attribute does contains spaces in the original HTML, then it WILL be wrapped with quotation marks. For example, if I wrote following on my page (note the trailing space for the title attribute value) <a href="{source}" title="{name}  " id="{id}" myAttr="{attr}" class="{cssClass}">Link to {source}</a> then I would have my placeholder quoted correctly and the result of the replacement would render as expected: The second important thing to note is that there are exceptions for the lazy attributes wrapping rule in IE. As you can see href attribute value did not contain spaces exactly as all the other attributes with placeholders, but it was still returned correctly quoted Custom attribute myAttr is also quoted correctly when returned back from document, though its placeholder value does not contain spaces either. Now, on account of the highly unlikely probability that you found this information useful and need a solution to the problem the aforementioned behavior introduces for Internet Explorer browser, I can suggest a simple workaround – manually quote the mischievous attributes prior the placeholder pattern is replaced. Using the code of contextFormat() method shown below, you would need to add following line right before the return statement: result = result.replace(/=({([^}]+)})/g, '="$1"'); Below please find original sample code:

  Read the article

• UppercuT v1.0 and 1.1&ndash;Linux (Mono), Multi-targeting, SemVer, Nitriq and Obfuscation, oh my!

  - by Robz / Fervent Coder

  Recently UppercuT (UC) quietly released version 1 (in August). I’m pretty happy with where we are, although I think it’s a few months later than I originally planned. I’m glad I held it back, it gave me some more time to think about some things a little more and also the opportunity to receive a patch for running builds with UC on Linux. We also released v1.1 very recently (December). UppercuT v1 Builds On Linux Perhaps the most significant changes to UC going v1 is that it now supports builds on Linux using Mono! This is thanks mostly to Svein Ackenhausen for the patches and working with me on getting it all working while not breaking the windows builds!  This means you can use mono on Windows or Linux. Notice the shell files to execute with Linux that come as part of UC now. Multi-Targeting Perhaps one of the hardest things to do that requires an automated build is multi-targeting. At v1 this is early, and possibly prone to some issues, but available.  We believe in making everything stupid simple, so it’s as simple as adding a comma to the microsoft.framework property. i.e. “net-3.5, net-4.0” to suddenly produce both framework builds. When you build, this is what you get (if you meet each framework’s requirements): At this time you have to let UC override the build location (as it does by default) or this will not work.  Semantic Versioning By now many of you have been using UppercuT for awhile and have watched how we have done versioning. Many of you who use git already know we put the revision hash in the informational/product version as the last octet. At v1, UppercuT has adopted the semantic versioning scheme. What does that mean? This is a short read, but a good one: http://SemVer.org SemVer (Semantic Versioning) is really using versioning what it was meant for. You have three octets. Major.Minor.Patch as in 1.1.0.  UC will use three different versioning concepts, one for the assembly version, one for the file version, and one for the product version. All versions - The first three octects of the version are owned by SemVer. Major.Minor.Patch i.e.: 1.1.0 Assembly Version - The assembly version would much closer follow SemVer. Last digit is always 0. Major.Minor.Patch.0 i.e: 1.1.0.0 File Version - The file version occupies the build number as the last digit. Major.Minor.Patch.Build i.e.: 1.1.0.2650 Product/Informational Version - The last octect of your product/informational version is the source control revision/hash. Major.Minor.Patch.RevisionOrHash i.e. (TFS/SVN): 1.1.0.235 i.e. (Git/HG): 1.1.0.a45ace4346adef0 SemVer is not on by default, the passive versioning scheme is still in effect. Notice that version.use_semanticversioning has been added to the UppercuT.config file (and version.patch in support of the third octet): Gems Support Gems support was added at v1. This will probably be deprecated as some point once there is an announced sunset for Nu v1. Application gems may keep it around since there is no alternative for that yet though (CoApp would be a possible replacement). Nitriq Support Nitriq is a code analysis tool like NDepend. It’s built by Mr. Jon von Gillern. It uses LINQ query language, so you can use a familiar idiom when analyzing your code base. It’s a pretty awesome tool that has a free version for those looking to do code analysis! To use Nitriq with UC, you are going to need the console edition.  To take advantage of Nitriq, you just need to update the location of Nitriq in the config: Then add the nitriq project files at the root of your source. Please refer to the Nitriq documentation on how these are created. UppercuT v1.1 Obfuscation One thing I started looking into was an easy way to obfuscate my code. I came across EazFuscator, which is both free and awesome. Plus the GUI for it is super simple to use. How do you make obfuscation even easier? Make it a convention and a configurable property in the UC config file! And the code gets obfuscated! Closing Definitely get out and look at the new release. It contains lots of chocolaty (sp?) goodness. And remember, the upgrade path is almost as simple as drag and drop!

  Read the article

• Creating SparseImages for Pivot

  - by John Conwell

  Learning how to programmatically make collections for Microsoft Live Labs Pivot has been a pretty interesting ride. There are very few examples out there, and the folks at MS Live Labs are often slow on any feedback.  But that is what Reflector is for, right? Well, I was creating these InfoCard images (similar to the Car images in the "New Cars" sample collection that that MS created for Pivot), and wanted to put a Tag Cloud into the info card.  The problem was the size of the tag cloud might vary in order for all the tags to fit into the tag cloud (often times being bigger than the info card itself).  This was because the varying word lengths and calculated font sizes. So, to fix this, I made the tag cloud its own separate image from the info card.  Then, I would create a sparse image out of the two images, where the tag cloud fit into a small section of the info card.  This would allow the user to see the info card, but then zoom into the tag cloud and see all the tags at a normal resolution.  Kind'a cool. But...I couldn't find one code example (not one!) of how to create a sparse image.  There is one page on the SeaDragon site (http://www.seadragon.com/developer/creating-content/deep-zoom-tools/) that gives over the API for creating images and collections, and it sparsely goes over how to create a sparse image, but unless you are familiar with the API already, the documentation doesn't help very much. The key is the Image.ViewportWidth and Image.ViewportOrigin properties of the image that is getting super imposed on the main image.  I'll walk through the code below.  I've setup a couple Point structs to represent the parent and sub image sizes, as well as where on the parent I want to position the sub image.  Next, create the parent image.  This is pretty straight forward.  Then I create the sub image.  Then I calculate several ratios; the height to width ratio of the sub image, the width ratio of the sub image to the parent image, the height ratio of the sub image to the parent image, then the X and Y coordinates on the parent image where I want the sub image to be placed represented as a ratio of the position to the parent image size. After all these ratios have been calculated, I use them to calculate the Image.ViewportWidth and Image.ViewportOrigin values, then pass the image objects into the SparseImageCreator and call Create. The key thing that was really missing from the API documentation page is that when setting up your sub images, everything is expressed in a ratio in relation to the main parent image.  If I had known this, it would have saved me a lot of trial and error time.  And how did I figure this out?  Reflector of course!  There is a tool called Deep Zoom Composer that came from MS Live Labs which can create a sparse image.  I just dug around the tool's code until I found the method that create sparse images.  But seriously...look at the API documentation from the SeaDragon size and look at the code below and tell me if the documentation would have helped you at all.  I don't think so!   public static void WriteDeepZoomSparseImage(string mainImagePath, string subImagePath, string destination) {     Point parentImageSize = new Point(720, 420);     Point subImageSize = new Point(490, 310);     Point subImageLocation = new Point(196, 17);     List<Image> images = new List<Image>();     //create main image     Image mainImage = new Image(mainImagePath);     mainImage.Size = parentImageSize;     images.Add(mainImage);     //create sub image     Image subImage = new Image(subImagePath);     double hwRatio = subImageSize.X/subImageSize.Y;            // height width ratio of the tag cloud     double nodeWidth = subImageSize.X/parentImageSize.X;        // sub image width to parent image width ratio     double nodeHeight = subImageSize.Y / parentImageSize.Y;    // sub image height to parent image height ratio     double nodeX = subImageLocation.X/parentImageSize.X;       //x cordinate position on parent / width of parent     double nodeY = subImageLocation.Y / parentImageSize.Y;     //y cordinate position on parent / height of parent     subImage.ViewportWidth = (nodeWidth < double.Epsilon) ? 1.0 : (1.0 / nodeWidth);     subImage.ViewportOrigin = new Point(         (nodeWidth < double.Epsilon) ? -1.0 : (-nodeX / nodeWidth),         (nodeHeight < double.Epsilon) ? -1.0 : ((-nodeY / nodeHeight) / hwRatio));     images.Add(subImage);     //create sparse image     SparseImageCreator creator = new SparseImageCreator();     creator.Create(images, destination); }

  Read the article

• How is the gimbal locked problem solved using accumulative matrix transformations

  - by Luke San Antonio

  I am reading the online "Learning Modern 3D Graphics Programming" book by Jason L. McKesson As of now, I am up to the gimbal lock problem and how to solve it using quaternions. However right here, at the Quaternions page. Part of the problem is that we are trying to store an orientation as a series of 3 accumulated axial rotations. Orientations are orientations, not rotations. And orientations are certainly not a series of rotations. So we need to treat the orientation of the ship as an orientation, as a specific quantity. I guess this is the first spot I start to get confused, the reason is because I don't see the dramatic difference between orientations and rotations. I also don't understand why an orientation cannot be represented by a series of rotations... Also: The first thought towards this end would be to keep the orientation as a matrix. When the time comes to modify the orientation, we simply apply a transformation to this matrix, storing the result as the new current orientation. This means that every yaw, pitch, and roll applied to the current orientation will be relative to that current orientation. Which is precisely what we need. If the user applies a positive yaw, you want that yaw to rotate them relative to where they are current pointing, not relative to some fixed coordinate system. The concept, I understand, however I don't understand how if accumulating matrix transformations is a solution to this problem, how the code given in the previous page isn't just that. Here's the code: void display() { glClearColor(0.0f, 0.0f, 0.0f, 0.0f); glClearDepth(1.0f); glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); glutil::MatrixStack currMatrix; currMatrix.Translate(glm::vec3(0.0f, 0.0f, -200.0f)); currMatrix.RotateX(g_angles.fAngleX); DrawGimbal(currMatrix, GIMBAL_X_AXIS, glm::vec4(0.4f, 0.4f, 1.0f, 1.0f)); currMatrix.RotateY(g_angles.fAngleY); DrawGimbal(currMatrix, GIMBAL_Y_AXIS, glm::vec4(0.0f, 1.0f, 0.0f, 1.0f)); currMatrix.RotateZ(g_angles.fAngleZ); DrawGimbal(currMatrix, GIMBAL_Z_AXIS, glm::vec4(1.0f, 0.3f, 0.3f, 1.0f)); glUseProgram(theProgram); currMatrix.Scale(3.0, 3.0, 3.0); currMatrix.RotateX(-90); //Set the base color for this object. glUniform4f(baseColorUnif, 1.0, 1.0, 1.0, 1.0); glUniformMatrix4fv(modelToCameraMatrixUnif, 1, GL_FALSE, glm::value_ptr(currMatrix.Top())); g_pObject->Render("tint"); glUseProgram(0); glutSwapBuffers(); } To my understanding, isn't what he is doing (modifying a matrix on a stack) considered accumulating matrices, since the author combined all the individual rotation transformations into one matrix which is being stored on the top of the stack. My understanding of a matrix is that they are used to take a point which is relative to an origin (let's say... the model), and make it relative to another origin (the camera). I'm pretty sure this is a safe definition, however I feel like there is something missing which is blocking me from understanding this gimbal lock problem. One thing that doesn't make sense to me is: If a matrix determines the difference relative between two "spaces," how come a rotation around the Y axis for, let's say, roll, doesn't put the point in "roll space" which can then be transformed once again in relation to this roll... In other words shouldn't any further transformations to this point be in relation to this new "roll space" and therefore not have the rotation be relative to the previous "model space" which is causing the gimbal lock. That's why gimbal lock occurs right? It's because we are rotating the object around set X, Y, and Z axes rather than rotating the object around it's own, relative axes. Or am I wrong? Since apparently this code I linked in isn't an accumulation of matrix transformations can you please give an example of a solution using this method. So in summary: What is the difference between a rotation and an orientation? Why is the code linked in not an example of accumulation of matrix transformations? What is the real, specific purpose of a matrix, if I had it wrong? How could a solution to the gimbal lock problem be implemented using accumulation of matrix transformations? Also, as a bonus: Why are the transformations after the rotation still relative to "model space?" Another bonus: Am I wrong in the assumption that after a transformation, further transformations will occur relative to the current? Also, if it wasn't implied, I am using OpenGL, GLSL, C++, and GLM, so examples and explanations in terms of these are greatly appreciated, if not necessary. The more the detail the better! Thanks in advance...

  Read the article

• Is Data Science “Science”?

  - by BuckWoody

  I hold the term “science” in very high esteem. I grew up on the Space Coast in Florida, and eventually worked at the Kennedy Space Center, surrounded by very intelligent people who worked in various scientific fields. Recently a new term has entered the computing dialog – “Data Scientist”. Since it’s not a standard term, it has a lot of definitions, and in fact has been disputed as a correct term. After all, the reasoning goes, if there’s no such thing as “Data Science” then how can there be a Data Scientist? This argument has been made before, albeit with a different term – “Computer Science”. In Peter Denning’s excellent article “Is Computer Science Science” (April  2005/Vol. 48, No. 4 COMMUNICATIONS OF THE ACM) there are many points that separate “science” from “engineering” and even “art”.  I won’t repeat the content of that article here (I recommend you read it on your own) but will leverage the points he makes there. Definition of Science To ask the question “is data science ‘science’” then we need to start with a definition of terms. Various references put the definition into the same basic areas: Study of the physical world Systematic and/or disciplined study of a subject area ...and then they include the things studied, the bodies of knowledge and so on. The word itself comes from Latin, and means merely “to know” or “to study to know”. Greek divides knowledge further into “truth” (episteme), and practical use or effects (tekhne). Normally computing falls into the second realm. Definition of Data Science And now a more controversial definition: Data Science. This term is so new and perhaps so niche that the major dictionaries haven’t yet picked it up (my OED reference is older – can’t afford to pop for the online registration at present). Researching the term's general use I created an amalgam of the definitions this way: “Studying and applying mathematical and other techniques to derive information from complex data sets.” Using this definition, data science certainly seems to be science - it's learning about and studying some object or area using systematic methods. But implicit within the definition is the word “application”, which makes the process more akin to engineering or even technology than science. In fact, I find that using these techniques – and data itself – part of science, not science itself. I leave out the concept of studying data patterns or algorithms as part of this discipline. That is actually a domain I see within research, mathematics or computer science. That of course is a type of science, but does not seek for practical applications. As part of the argument against calling it “Data Science”, some point to the scientific method of creating a hypothesis, testing with controls, testing results against the hypothesis, and documenting for repeatability.  These are not steps that we often take in working with data. We normally start with a question, and fit patterns and algorithms to predict outcomes and find correlations. In this way Data Science is more akin to statistics (and in fact makes heavy use of them) in the process rather than starting with an assumption and following on with it. So, is Data Science “Science”? I’m uncertain – and I’m uncertain it matters. Even if we are facing rampant “title inflation” these days (does anyone introduce themselves as a secretary or supervisor anymore?) I can tolerate the term at least from the intent that we use data to study problems across a wide spectrum, rather than restricting it to a single domain. And I also understand those who have worked hard to achieve the very honorable title of “scientist” who have issues with those who borrow the term without asking. What do you think? Science, or not? Does it matter?

  Read the article

• How do I cleanly design a central render/animation loop?

  - by mtoast

  I'm learning some graphics programming, and am in the midst of my first such project of any substance. But, I am really struggling at the moment with how to architect it cleanly. Let me explain. To display complicated graphics in my current language of choice (JavaScript -- have you heard of it?), you have to draw graphical content onto a <canvas> element. And to do animation, you must clear the <canvas> after every frame (unless you want previous graphics to remain). Thus, most canvas-related JavaScript demos I've seen have a function like this: function render() { clearCanvas(); // draw stuff here requestAnimationFrame(render); } render, as you may surmise, encapsulates the drawing of a single frame. What a single frame contains at a specific point in time, well... that is determined by the program state. So, in order for my program to do its thing, I just need to look at the state, and decide what to render. Right? Right. But that is more complicated than it seems. My program is called "Critter Clicker". In my program, you see several cute critters bouncing around the screen. Clicking on one of them agitates it, making it bounce around even more. There is also a start screen, which says "Click to start!" prior to the critters being displayed. Here are a few of the objects I'm working with in my program: StartScreenView // represents the start screen CritterTubView // represents the area in which the critters live CritterList // a collection of all the critters Critter // a single critter model CritterView // view of a single critter Nothing too egregious with this, I think. Yet, when I set out to flesh out my render function, I get stuck, because everything I write seems utterly ugly and reminiscent of a certain popular Italian dish. Here are a couple of approaches I've attempted, with my internal thought process included, and unrelated bits excluded for clarity. Approach 1: "It's conditions all the way down" // "I'll just write the program as I think it, one frame at a time." if (assetsLoaded) { if (userClickedToStart) { if (critterTubDisplayed) { if (crittersDisplayed) { forEach(crittersList, function(c) { if (c.wasClickedRecently) { c.getAgitated(); } }); } else { displayCritters(); } } else { displayCritterTub(); } } else { displayStartScreen(); } } That's a very much simplified example. Yet even with only a fraction of all the rendering conditions visible, render is already starting to get out of hand. So, I dispense with that and try another idea: Approach 2: Under the Rug // "Each view object shall be responsible for its own rendering. // "I'll pass each object the program state, and each can render itself." startScreen.render(state); critterTub.render(state); critterList.render(state); In this setup, I've essentially just pushed those crazy nested conditions to a deeper level in the code, hiding them from view. In other words, startScreen.render would check state to see if it needed actually to be drawn or not, and take the correct action. But this seems more like it only solves a code-aesthetic problem. The third and final approach I'm considering that I'll share is the idea that I could invent my own "wheel" to take care of this. I'm envisioning a function that takes a data structure that defines what should happen at any given point in the render call -- revealing the conditions and dependencies as a kind of tree. Approach 3: Mad Scientist renderTree({ phases: ['startScreen', 'critterTub', 'endCredits'], dependencies: { startScreen: ['assetsLoaded'], critterTub: ['startScreenClicked'], critterList ['critterTubDisplayed'] // etc. }, exclusions: { startScreen: ['startScreenClicked'], // etc. } }); That seems kind of cool. I'm not exactly sure how it would actually work, but I can see it being a rather nifty way to express things, especially if I flex some of JavaScript's events. In any case, I'm a little bit stumped because I don't see an obvious way to do this. If you couldn't tell, I'm coming to this from the web development world, and finding that doing animation is a bit more exotic than arranging an MVC application for handling simple requests - responses. What is the clean, established solution to this common-I-would-think problem?

  Read the article

• Centered Content using panelGridLayout

  - by Duncan Mills

  A classic layout conundrum,  which I think pretty much every ADF developer may have faced at some time or other, is that of truly centered (centred) layout. Typically this requirement comes up in relation to say displaying a login type screen or similar. Superficially the  problem seems easy, but as my buddy Eduardo explained when discussing this subject a couple of years ago it's actually a little more complex than you might have thought. If fact, even the "solution" provided in that posting is not perfect and suffers from a several issues (not Eduardo's fault, just limitations of panelStretch!) The top, bottom, end and start facets all need something in them The percentages you apply to the topHeight, startWidth etc. are calculated as part of the whole width.  This means that you have to guestimate the correct percentage based on your typical screen size and the sizing of the centered content. So, at best, you will in fact only get approximate centering, and the more you tune that centering for a particular browser size the more it will fail if the user resizes. You can't attach styles to the panelStretchLayout facets so to provide things like background color or fixed sizing you need to embed another container that you can apply styles to, typically a panelgroupLayout   For reference here's the code to print a simple 100px x 100px red centered square  using the panelStretchLayout solution, approximately tuned to a 1980 x 1080 maximized browser (IDs omitted for brevity): <af:panelStretchLayout startWidth="45%" endWidth="45%"                        topHeight="45%"  bottomHeight="45%" >   <f:facet name="center">     <af:panelGroupLayout inlineStyle="height:100px;width:100px;background-color:red;"                          layout="vertical"/>   </f:facet>   <f:facet name="top">     <af:spacer height="1" width="1"/>   </f:facet>   <f:facet name="bottom">     <af:spacer height="1" width="1"/>   </f:facet>   <f:facet name="start">     <af:spacer height="1" width="1"/>   </f:facet>   <f:facet name="end">     <af:spacer height="1" width="1"/>    </f:facet> </af:panelStretchLayout>  And so to panelGridLayout  So here's the  good news, panelGridLayout makes this really easy and it works without the caveats above.  The key point is that percentages used in the grid definition are evaluated after the fixed sizes are taken into account, so rather than having to guestimate what percentage will "more, or less", center the content you can just say "allocate half of what's left" to the flexible content and you're done. Here's the same example using panelGridLayout: <af:panelGridLayout> <af:gridRow height="50%"/> <af:gridRow height="100px"> <af:gridCell width="50%" /> <af:gridCell width="100px" halign="stretch" valign="stretch"  inlineStyle="background-color:red;"> <af:spacer width="1" height="1"/> </af:gridCell> <af:gridCell width="50%" /> </af:gridRow> <af:gridRow height="50%"/> </af:panelGridLayout>  So you can see that the amount of markup is somewhat smaller (as is, I should mention, the generated DOM structure in the browser), mainly because we don't need to introduce artificial components to ensure that facets are actually observed in the final result.  But the key thing here is that the centering is no longer approximate and it will work as expected as the user resizes the browser screen.  By far this is a more satisfactory solution and although it's only a simple example, it will hopefully open your eyes to the potential of panelGridLayout as your number one, go-to layout container. Just a reminder though, right now, panelGridLayout is only available in 11.1.2.2 and above.

  Read the article

• Thread.Interrupt Is Evil

  - by Alois Kraus

  Recently I have found an interesting issue with Thread.Interrupt during application shutdown. Some application was crashing once a week and we had not really a clue what was the issue. Since it happened not very often it was left as is until we have got some memory dumps during the crash. A memory dump usually means WindDbg which I really like to use (I know I am one of the very few fans of it).  After a quick analysis I did find that the main thread already had exited and the thread with the crash was stuck in a Monitor.Wait. Strange Indeed. Running the application a few thousand times under the debugger would potentially not have shown me what the reason was so I decided to what I call constructive debugging. I did create a simple Console application project and try to simulate the exact circumstances when the crash did happen from the information I have via memory dump and source code reading. The thread that was  crashing was actually MS code from an old version of the Microsoft Caching Application Block. From reading the code I could conclude that the main thread did call the Dispose method on the CacheManger class which did call Thread.Interrupt on the cache scavenger thread which was just waiting for work to do. My first version of the repro looked like this   static void Main(string[] args) { Thread t = new Thread(ThreadFunc) { IsBackground = true, Name = "Test Thread" }; t.Start(); Console.WriteLine("Interrupt Thread"); t.Interrupt(); } static void ThreadFunc() { while (true) { object value = Dequeue(); // block until unblocked or awaken via ThreadInterruptedException } } static object WaitObject = new object(); static object Dequeue() { object lret = "got value"; try { lock (WaitObject) { } } catch (ThreadInterruptedException) { Console.WriteLine("Got ThreadInterruptException"); lret = null; } return lret; } I do start a background thread and call Thread.Interrupt on it and then directly let the application terminate. The thread in the meantime does plenty of Monitor.Enter/Leave calls to simulate work on it. This first version did not crash. So I need to dig deeper. From the memory dump I did know that the finalizer thread was doing just some critical finalizers which were closing file handles. Ok lets add some long running finalizers to the sample. class FinalizableObject : CriticalFinalizerObject { ~FinalizableObject() { Console.WriteLine("Hi we are waiting to finalize now and block the finalizer thread for 5s."); Thread.Sleep(5000); } } class Program { static void Main(string[] args) { FinalizableObject fin = new FinalizableObject(); Thread t = new Thread(ThreadFunc) { IsBackground = true, Name = "Test Thread" }; t.Start(); Console.WriteLine("Interrupt Thread"); t.Interrupt(); GC.KeepAlive(fin); // prevent finalizing it too early // After leaving main the other thread is woken up via Thread.Abort // while we are finalizing. This causes a stackoverflow in the CLR ThreadAbortException handling at this time. } With this changed Main method and a blocking critical finalizer I did get my crash just like the real application. The funny thing is that this is actually a CLR bug. When the main method is left the CLR does suspend all threads except the finalizer thread and declares all objects as garbage. After the normal finalizers were called the critical finalizers are executed to e.g. free OS handles (usually). Remember that I did call Thread.Interrupt as one of the last methods in the Main method. The Interrupt method is actually asynchronous and does wake a thread up and throws a ThreadInterruptedException only once unlike Thread.Abort which does rethrow the exception when an exception handling clause is left. It seems that the CLR does not expect that a frozen thread does wake up again while the critical finalizers are executed. While trying to raise a ThreadInterrupedException the CLR goes down with an stack overflow. Ups not so nice. Why has this nobody noticed for years is my next question. As it turned out this error does only happen on the CLR for .NET 4.0 (x86 and x64). It does not show up in earlier or later versions of the CLR. I have reported this issue on connect here but so far it was not confirmed as a CLR bug. But I would be surprised if my console application was to blame for a stack overflow in my test thread in a Monitor.Wait call. What is the moral of this story? Thread.Abort is evil but Thread.Interrupt is too. It is so evil that even the CLR of .NET 4.0 contains a race condition during the CLR shutdown. When the CLR gurus can get it wrong the chances are high that you get it wrong too when you use this constructs. If you do not believe me see what Patrick Smacchia does blog about Thread.Abort and List.Sort. Not only the CLR creators can get it wrong. The BCL writers do sometimes have a hard time with correct exception handling as well. If you do tell me that you use Thread.Abort frequently and never had problems with it I do suspect that you do not have looked deep enough into your application to find such sporadic errors.

  Read the article

• MERGE gives better OUTPUT options

  - by Rob Farley

  MERGE is very cool. There are a ton of useful things about it – mostly around the fact that you can implement a ton of change against a table all at once. This is great for data warehousing, handling changes made to relational databases by applications, all kinds of things. One of the more subtle things about MERGE is the power of the OUTPUT clause. Useful for logging.   If you’re not familiar with the OUTPUT clause, you really should be – it basically makes your DML (INSERT/DELETE/UPDATE/MERGE) statement return data back to you. This is a great way of returning identity values from INSERT commands (so much better than SCOPE_IDENTITY() or the older (and worse) @@IDENTITY, because you can get lots of rows back). You can even use it to grab default values that are set using non-deterministic functions like NEWID() – things you couldn’t normally get back without running another query (or with a trigger, I guess, but that’s not pretty). That inserted table I referenced – that’s part of the ‘behind-the-scenes’ work that goes on with all DML changes. When you insert data, this internal table called inserted gets populated with rows, and then used to inflict the appropriate inserts on the various structures that store data (HoBTs – the Heaps or B-Trees used to store data as tables and indexes). When deleting, the deleted table gets populated. Updates get a matching row in both tables (although this doesn’t mean that an update is a delete followed by an inserted, it’s just the way it’s handled with these tables). These tables can be referenced by the OUTPUT clause, which can show you the before and after for any DML statement. Useful stuff. MERGE is slightly different though. With MERGE, you get a mix of entries. Your MERGE statement might be doing some INSERTs, some UPDATEs and some DELETEs. One of the most common examples of MERGE is to perform an UPSERT command, where data is updated if it already exists, or inserted if it’s new. And in a single operation too. Here, you can see the usefulness of the deleted and inserted tables, which clearly reflect the type of operation (but then again, MERGE lets you use an extra column called $action to show this). (Don’t worry about the fact that I turned on IDENTITY_INSERT, that’s just so that I could insert the values) One of the things I love about MERGE is that it feels almost cursor-like – the UPDATE bit feels like “WHERE CURRENT OF …”, and the INSERT bit feels like a single-row insert. And it is – but into the inserted and deleted tables. The operations to maintain the HoBTs are still done using the whole set of changes, which is very cool. And $action – very convenient. But as cool as $action is, that’s not the point of my post. If it were, I hope you’d all be disappointed, as you can’t really go near the MERGE statement without learning about it. The subtle thing that I love about MERGE with OUTPUT is that you can hook into more than just inserted and deleted. Did you notice in my earlier query that my source table had a ‘src’ field, that wasn’t used in the insert? Normally, this would be somewhat pointless to include in my source query. But with MERGE, I can put that in the OUTPUT clause. This is useful stuff, particularly when you’re needing to audit the changes. Suppose your query involved consolidating data from a number of sources, but you didn’t need to insert that into the actual table, just into a table for audit. This is now very doable, either using the INTO clause of OUTPUT, or surrounding the whole MERGE statement in brackets (parentheses if you’re American) and using a regular INSERT statement. This is also doable if you’re using MERGE to just do INSERTs. In case you hadn’t realised, you can use MERGE in place of an INSERT statement. It’s just like the UPSERT-style statement we’ve just seen, except that we want nothing to match. That’s easy to do, we just use ON 1=2. This is obviously more convoluted than a straight INSERT. And it’s slightly more effort for the database engine too. But, if you want the extra audit capabilities, the ability to hook into the other source columns is definitely useful. Oh, and before people ask if you can also hook into the target table’s columns... Yes, of course. That’s what deleted and inserted give you.

  Read the article

• Keep a programming language backwards compatible vs. fixing its flaws

  - by Radu Murzea

  First, some context (stuff that most of you know anyway): Every popular programming language has a clear evolution, most of the time marked by its version: you have Java 5, 6, 7 etc., PHP 5.1, 5.2, 5.3 etc. Releasing a new version makes new APIs available, fixes bugs, adds new features, new frameworks etc. So all in all: it's good. But what about the language's (or platform's) problems? If and when there's something wrong in a language, developers either avoid it (if they can) or they learn to live with it. Now, the developers of those languages get a lot of feedback from the programmers that use them. So it kind of makes sense that, as time (and version numbers) goes by, the problems in those languages will slowly but surely go away. Well, not really. Why? Backwards compatibility, that's why. But why is this so? Read below for a more concrete situation. The best way I can explain my question is to use PHP as an example: PHP is loved thousands of people and hated by just as many thousands. All languages have flaws, but apparently PHP is special. Check out this blog post. It has a very long list of so called flaws in PHP. Now, I'm not a PHP developer (not yet), but I read through all of it and I'm sure that a big chunk of that list are indeed real issues. (Not all of it, since it's potentially subjective). Now, if I was one of the guys who actively develops PHP, I would surely want to fix those problems, one by one. However, if I do that, then code that relies on a particular behaviour of the language will break if it runs on the new version. Summing it up in 2 words: backwards compatibility. What I don't understand is: why should I keep PHP backwards compatible? If I release PHP version 8 with all those problems fixed, can't I just put a big warning on it saying: "Don't run old code on this version !"? There is a thing called deprecation. We had it for years and it works. In the context of PHP: look at how these days people actively discourage the use of the mysql_* functions (and instead recommend mysqli_* and PDO). Deprecation works. We can use it. We should use it. If it works for functions, why shouldn't it work for entire languages? Let's say I (the developer of PHP) do this: Launch a new version of PHP (let's say 8) with all of those flaws fixed New projects will start using that version, since it's much better, clearer, more secure etc. However, in order not to abandon older versions of PHP, I keep releasing updates to it, fixing security issues, bugs etc. This makes sense for reasons that I'm not listing here. It's common practice: look for example at how Oracle kept updating version 5.1.x of MySQL, even though it mostly focused on version 5.5.x. After about 3 or 4 years, I stop updating old versions of PHP and leave them to die. This is fine, since in those 3 or 4 years, most projects will have switched to PHP 8 anyway. My question is: Do all these steps make sense? Would it be so hard to do? If it can be done, then why isn't it done? Yes, the downside is that you break backwards compatibility. But isn't that a price worth paying ? As an upside, in 3 or 4 years you'll have a language that has 90 % of its problems fixed.... a language much more pleasant to work with. Its name will ensure its popularity. EDIT: OK, so I didn't expressed myself correctly when I said that in 3 or 4 years people will move to the hypothetical PHP 8. What I meant was: in 3 or 4 years, people will use PHP 8 if they start a new project.

  Read the article

< Previous Page | 720 721 722 723 724 725 726 727 728 729 730 731  | Next Page >