Search Results

Search found 29638 results on 1186 pages for 'phone number'.

Page 726/1186 | < Previous Page | 722 723 724 725 726 727 728 729 730 731 732 733  | Next Page >

• Recommendation for a non-standard SSL port

  - by onurs

  Hey guys, On our server I have a single IP, and need to host 2 different SSL sites. Sites have different owners so have different SSL certificates, and can't share the same certificate with SAN. So as a last resort I have modified the web application to give the ability to use a specified port for secure pages. For its simple look I used port 200. However I'm worried about some visitors may be unable to see the site because of their firewalls / proxies blocking the port for ssl connections. I heard some people were unable to see the website, a home user and someone from an enterprise company, don't know if this was the reason. So, any recommendations for a non-standard SSL port number (443 is used by the other site) which may work for visitors better than port 200 ? Like 8080 or 8443 perhaps? Thanks!

  Read the article

• Optimal Configuration for five 300 GB 15K SAS Drives

  - by Bob

  I recently acquired an HP Z800 workstation that has five 300 GB 15K SAS Drives. This system will be dedicated to running multiple virtual machines under VMware Workstation (Note: I'm not using ESXi because I do plan to use the system for other purposes.). For the host OS, I plan to install RHEL 5. My number one concern is guest performance. For example, should I create a RAID 10 array for the OS and virtual machine storage with four of the drives and reserve the 5th? Or, is there a solution that will provide better performance?

  Read the article

• What are some good, IP Address Management solutions for IPv6? [closed]

  - by Russell Heilling

  There are a number of open source IPAM tools available for IPv4 address management; however there seems to be a distinct lack of actively updated tools available for IPv6. Other than FreeIPdb (code no longer maintained) or the RIPE Database (I have seen some customisations to the RIPEdb that allow for enterprise/ISP IPAM but it seems like overkill for a system that will probably only ever handle one /32 worth of space). Are there any other options that I'm missing? (Database only please. I know vi can be used for flat text IPAM, that's how I'm handling our /32 at the moment, but I don't see it scaling for much longer) It doesn't have to be open source but what are folks doing to manage IPv6 in a dual stack environment

  Read the article

• gltail “Missing gem net-ssh”

  - by Ian

  I'm attempting to get gltail set up on my local system to monitor logs remotely. I've got all the dependencies installed, but when I go to run gltail ... ./gl_tail configfile ../config.yaml I get this output: Missing gem net-ssh. Ubuntu: sudo gem install -y net-ssh -r .. which I've done a number of times. Here is the output: dev@ubuntu:~/Desktop/Fudge-gltail-e5b252d/bin$ sudo gem install net-ssh Successfully installed net-ssh-2.0.15 1 gem installed Installing ri documentation for net-ssh-2.0.15... Installing RDoc documentation for net-ssh-2.0.15... But when I go to run it again, I get the same missing gem net-ssh error. dev@ubuntu:~/Desktop/Fudge-gltail-e5b252d/bin$ which ruby /usr/bin/ruby dev@ubuntu:~/Desktop/Fudge-gltail-e5b252d/bin$ which gem /usr/bin/gem Why isn't net-ssh being seen as properly installed?

  Read the article

• how to prevent log output from PostgreSQL stored procedure ?

  - by ssc

  I am running a number of PostgreSQL scripts that used to produce excessive log output. I managed to reduce most of the output to an acceptable amount by passing --quiet as parameter to the psql command line client and adding SET client_min_messages='warning'; to the beginning of my SQL scripts. This works fine for most basic statements like SELECT, INSERT, UPDATE, etc.) However, when I call a stored function in a script using e.g. SELECT my_func(my_args);, there is still log output similar to my_func (omitted a long with many '-' here because SF thinks that's a headline) (1 row) The output is useless; it only makes me having to scroll back up a long way after the script has run and also makes it much harder than necessary to spot any relevant error output. How can I get rid of it ?

  Read the article

• apache returning "The connection was reset"

  - by usjes

  One of my dedicated servers had some network issue today and the data center has to replace some router. Since then the sites on that server returns "The connection was reset" error most of the time. I tried installing nginx and it opens better, but it still shows the error sometimes. Everything in the config seems normal, what could be causing this error? UPDATE: Just noticed that in whm apache status there are always only 1 requests currently being processed, 8 idle workers. I know for sure the server received thousands of requests per minute. What could be limiting this to such a low number?

  Read the article

• How do I parse a header with two different version [ID3] avoiding code duplication?

  - by user66141

  I really hope you can give me some interesting viewpoints for my situation, because I am not satisfied with my current approach. I am writing an MP3 parser, starting with an ID3v2 parser. Right now I`m working on the extended header parsing, my issue is that the optional header is defined differently in version 2.3 and 2.4 of the tag. The 2.3 version optional header is defined as follows: struct ID3_3_EXTENDED_HEADER{ DWORD dwExtHeaderSize; //Extended header size (either 6 or 8 bytes , excluded) WORD wExtFlags; //Extended header flags DWORD dwSizeOfPadding; //Size of padding (size of the tag excluding the frames and headers) }; While the 2.4 version is defined : struct ID3_4_EXTENDED_HEADER{ DWORD dwExtHeaderSize; //Extended header size (synchsafe int) BYTE bNumberOfFlagBytes; //Number of flag bytes BYTE bFlags; //Flags }; How could I parse the header while minimizing code duplication? Using two different functions to parse each version sounds less great, using a single function with a different flow for each occasion is similar, any good practices for this kind of issues ? Any tips for avoiding code duplication? Any help would be appreciated.

  Read the article

• Flashback Database

  - by Sebastian Solbach (DBA Community)

  Flashback Database bezeichnet die Funktionalität der Oracle Datenbank, die Datenbank zeitlich auf einen bestimmten Punkt, respektive eine bestimmte System Change Number (SCN) zurücksetzen zu können - vergleichbar mit einem Rückspulknopf eines Kassettenrekorders oder der Rücksetztaste eines CD-Players. Mag dieses Vorgehen bei Produktivsystemen eher selten Einsatz finden, da beim Rücksetzten alle Daten nach dem zurückgesetzten Zeitpunkt verloren wären (es sei denn man würde dieser vorher exportieren), gibt es gerade für Test- oder Standby Systeme viele Einsatzmöglichkeiten: Rücksetzten des Systems bei fehlgeschlagenen Applikations-Upgrade Alternatives Point in Time Recovery (PITR) mit anschließendem Roll Forward (besonders geeignet bei Standby Systemen) Testdatenbank mit definiertem, reproduzierbaren Ausgangspunkt (z.B. für Real Application Testing) Datenbank Upgrade Test Einige bestehende Datenbank Funktionalitäten verwenden Flashback Database implizit: Snapshot Standby Reinstanziierung der Standby (z.B. bei Fast Start Failover) Obwohl diese Funktionalität gerade für Standby Systeme und Testsysteme bestens geeignet ist, gibt es eine gewisse Zurückhaltung Flashback Database einzusetzen. Eine Ursache ist oft die Angst vor zusätzlicher Last, die das Schreiben der Flashback Logs erzeugt, sowie der zusätzlich benötigte Plattenplatz. Dabei ist die Last im Normalfall relativ gering (ca. 5%) und auch der zusätzlich benötigte Platz für die Flashback Logs lässt sich relativ genau bestimmen. Ebenfalls wird häufig nicht beachtet, dass es auch ohne das explizite Einschalten der Flashback Logs möglich ist, einen garantieren Rücksetzpunkt (Guaranteed Restore Point kurz GRP) festzulegen, und die Datenbank dann auf diesen Restore Point zurückzusetzen. Das Setzen eines garantierten Rücksetzpunktes funktioniert in 11gR2 im laufenden Betrieb. Wie dies genau funktioniert, welche Unterschiede es zum generellen Einschalten von Flashback Logs gibt, wie man Flashback Database monitoren kann und was es sonst noch zu berücksichtigen gibt, damit beschäftigt sich dieser Tipp.

  Read the article

• How does azure memory usage work?

  - by Jed Grant

  I have a windows azure website. In the dashboard it shows me that I have used 1.51 GB of the 2GB available per hour. I keep increasing the number of instances available in the shared node so the site doesn't shut down. After each hour finishes, the memory usage still shows 1.51 GB used. I assume this would start at ZERO and then be used as time goes on, but that doesn't appear to be the case. How does server memory work? What are some reasons my application using this much memory? (I use no output caching and generally have just built off of the basic MVC templates provided in visual studio.) What other considerations should I be making to get the amount of memory needed to decrease?

  Read the article

• OS X clients ignoring Windows print server permissions

  - by Ilumiari

  I'm in the process of testing a Windows Server 2008 R2 print server for a mixed OS X/Windows environment. Any security permissions (AD groups) I set for the printers on the print server are not honoured by the OS X clients. Only if I remove absolutely all permissions for a given printer will an OS X client not print to that printer. The Windows clients honour the permissions as expected. The PrintService log doesn't record any activity when an unprivileged Windows client attempts to print, and records a typical print job when an unprivileged OS X client attempts to print. Has anyone encountered this problem before and have a fix? With 600-700 clients, a number of which are dual-booting, restricting by IP address is not viable. EDIT: The jobs are definitely going through the print server, they show up in the logs with their AD credentials.

  Read the article

• Frequent disconnects using wlan AR9285

  - by John Neil

  I'm getting a large number of disconnects from my wireless when I switched to oneiric server (I did not see these happen with oneiric desktop) from my AR9285 wireless LAN device. Here is the syslog snippet: Oct 17 09:43:17 weather kernel: [ 1537.329138] wlan0: deauthenticated from 00:12:17:7a:8e:42 (Reason: 7) Oct 17 09:43:17 weather kernel: [ 1537.340409] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 17 09:43:17 weather kernel: [ 1537.340423] cfg80211: Restoring regulatory settings Oct 17 09:43:17 weather kernel: [ 1537.340435] cfg80211: Calling CRDA to update world regulatory domain Oct 17 09:43:17 weather kernel: [ 1537.348571] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain Oct 17 09:43:17 weather kernel: [ 1537.348581] cfg80211: World regulatory domain updated: Oct 17 09:43:17 weather kernel: [ 1537.348586] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Oct 17 09:43:17 weather kernel: [ 1537.348594] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Oct 17 09:43:17 weather kernel: [ 1537.348600] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Oct 17 09:43:17 weather kernel: [ 1537.348607] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Oct 17 09:43:17 weather kernel: [ 1537.348613] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Oct 17 09:43:17 weather kernel: [ 1537.348620] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Here is the relevant lspci output: # lspci | grep Atheros 02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) I have done quite a bit of searching and saw discussions for previous versions of ubuntu that recommended installing the linux-backports-modules package. However, this does not appear to be available for oneiric (just the headers are listed as a package). Any advice on how to achieve a stable wireless connection for this server? It's location mitigates against using a wired connection.

  Read the article

• Trying to recover deleted Ubuntu partition

  - by user110984

  I made a mistake in logging into my 200 GB Ubuntu partition. I could not access Grub after that. Using a live CD I then ran Boot_Repair and apparently deleted the partition, I guess because I ran it from my 70 GB Windows partition. I can send the results of boot_info before that and of Boot_Repair. Then I ran TestDisk, which apparently found only dev/sda/ -320GB / 298 / GiB - WDC - WD3200BEVT-22A23T0 (Was there any more I could have done with TestDisk? I looked at the TestDisk_Step_By_Step example and found no way forward given that no other partitions turned up) I have run gpart and found this: /sda1 - 15 GB /sda2 - system reserved /sda3 - 70.15 GB /sda4 - extended 212.84 unallocated - 209.10 /sda5 - unknown 3.74 . I have been told I can recover the partition using gparted's Rescue start end command, but I don't know what to enter for start and end. [--EDIT: TestDisk Deeper Search stated that "the following partitions can't be recovered" and listed a 220-GB Linux partition 6 times. Then it stated that "The current number of heads per cylinder is 255 but the correct value may be 128" and I could try to change it in the Geometry menu (because apparently these are overlapping partitions) So should I do that?--]

  Read the article

• Routing tables don't show ppp0 after 12.04 kernel upgrade to 3.5.0: Haier CE682 modem configuration

  - by ubunsteve

  I'm trying to get my Haier CE682 EVDO modem, model number 201e:1022 to work in ubuntu 12.04 kernel 3.5.0-030500-generic #201207211835 . I had it working in a previous 12.04 kernel, using compat-wireless and these instructions http://zulkhamsyahmh.blogspot.com/2012/05/install-smartfren-haier-ce682-on-ubuntu.html, and to get it working had to edit the routing tables so that there was a ppp0 showing up, as suggested at http://www.linuxquestions.org/questions/slackware-14/wvdial-is-connecting-but-im-unable-to-do-anything-714861/ Network manager doesn't work with this modem, so I use either wvdial or gpppon to connect to it, both which work (after I run the command sudo modprobe usbserial vendor=0x201e product=0x1022 ) This is the output of when I connect with gpppon to the modem: Using interface ppp0 Connect: ppp0 <-- /dev/ttyUSB0 sent [LCP ConfReq id=0x1 ] rcvd [LCP ConfAck id=0x1 ] rcvd [LCP ConfReq id=0x2 ] sent [LCP ConfAck id=0x2 ] sent [LCP EchoReq id=0x0 magic=0x819c86db] rcvd [CHAP Challenge id=0x1 <1ac8f12799e953967a3cc222c9254690, name = ""] sent [CHAP Response id=0x1 <6f12a903dc40915ca2761c17b87f8fbd, name = "smart"] rcvd [LCP EchoRep id=0x0 magic=0x0] rcvd [CHAP Success id=0x1 ""] CHAP authentication succeeded CHAP authentication succeeded sent [CCP ConfReq id=0x1 ] sent [IPCP ConfReq id=0x1 ] rcvd [IPCP ConfReq id=0x1 ] sent [IPCP ConfAck id=0x1 ] rcvd [CCP ConfReq id=0x1] sent [CCP ConfAck id=0x1] rcvd [CCP ConfRej id=0x1 ] sent [CCP ConfReq id=0x2] rcvd [IPCP ConfRej id=0x1 ] sent [IPCP ConfReq id=0x2 ] rcvd [CCP ConfAck id=0x2] rcvd [IPCP ConfNak id=0x2 ] sent [IPCP ConfReq id=0x3 ] rcvd [IPCP ConfAck id=0x3 ] not replacing existing default route via 192.168.3.1 local IP address 10.191.248.154 remote IP address 10.17.95.25 primary DNS address 10.17.3.244 secondary DNS address 10.17.3.245 as you can see there is a problem with "not replacing existing default route via 192.168.3.1" This it the out put of route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 192.168.3.1 0.0.0.0 UG 0 0 0 wlan0 link-local * 255.255.0.0 U 1000 0 0 wlan0 192.168.3.0 * 255.255.255.0 U 2 0 0 wlan0 I had tried these commands, which had previously worked in the earlier kernel: route del default route add default ppp0 but that broke my wireless internet connection. I then added the default routing as shown above with sudo route add default gw 192.168.3.1 wlan0 So it seems I need to add or change the routing to show a ppp0 connection, but I don't know how to do that.

  Read the article

• Internet Explorer 9 is coming Monday to a web near you

  - by brian_ritchie

  Internet Explorer 9 is finally here...well almost.  Microsoft is releasing their new browser on March 14, 2011. IE9 has a number of improvements, including: Faster, Faster, Faster.  Did I mention it is faster?   With the new browsers coming out from Mozilla, Google, and Microsoft, there have been a flood of speed test coverage.  Chrome has long held the javascript speed crown.  But according to Steven J. Vaughan-Nichols over at ZDNET..."for the moment at least IE9 is actually the fastest browser I’ve tested to date."  He came to this revelation after figuring out that the 32-bit version of IE9 has the new Chakra JIT (the 64-bit version doesn't).  It also has a DirectX-based rendering engine so it can do cool tricks once reserved for desktop applications. Windows 7 Desktop Integration.  Read my post for more details.  Unfortantely, they didn't integrate my ideas...at least not yet :) Hot new UI.  Ok, they "borrowed" some ideas from Chrome...but that is the best form of flattery. Standards Compliance.  A real focus on HTML5 and CSS3.  Definite goodness for developers. So, go get yourself some IE9 on Monday and enjoy! 

  Read the article

• Sendmail Alias for Nonlocal Email Account

  - by Mark Roddy

  I admin a server which is running a number of web applications for a software dev team (source control, bug tracking, etc). The server has sendmail running solely as a transport to the departmental email server over which I have no control. We have someone who is still in the department but no longer on the dev team so I need to configure the transport agent to redirect all outgoing email (which would be coming from these applications) to the person that has taken their place. I added an entry in /etc/aliases like such: [email protected]: [email protected] But when I run /etc/init.d/sendmail newaliases I get the following error: /etc/mail/aliases: line 32: [email protected]... cannot alias non-local names So clearly I'm doing something I shouldn't. Is there a way to get aliases to work with non-local names or alternatively is their a way to accomplish my goal of redirecting outgoing mail for this user to another one? Technical Specs if the matter: Ubuntu 6.06 sendmail 8.13 (ubuntu provided package)

  Read the article

• How can i automatically move files based on their name?

  - by Pasha

  I have 13 folders containing scanned photographs. Some photographs have been renamed to the date on which they were taken, resulting in YYYY.MM.DD.tif name. It could potentially be YYYY.MM.DD (###).tif where ### is just a number. Others are just named IMG_###.tif I would like to move the files with the YYYY.MM.DD name to a YYYY\MM\DD folder structure. While the files are being moved, I would also like to append the original folder name to the end of the file name. So, a file 01\2012.06.26 (1).tif should end up 2012\06\26\2012.06.26 (1) - 01.tif Is there a Windows tool that can help me with this? Or do I need to resort to writing a custom app?

  Read the article

• Is it possible to add tcp autotuning to windows xp?

  - by Caspin

  I have a network application that needs to send messages at 60 times a second. The messages are usually 300-400 bytes, but can be as large as 1500. The default setting for SO_SNDBUF is too small and limits the number of message that can be sent if the network latency is anything greater then 100ms. The naive solution is to just bump the SO_SNDBUF size to to something large. However, depending on the latency and the packet size that could be anywhere from 64K to 8MB. One of Vista's new features is TCP autotuning. Autotuning monitors the tcp connection and dynamically adjust the buffer sizes to allow for optimal communication. I would like to use auto tuning on our windows xp machine so I don't need to guess what my buffers sizes should be. Is there a way to install either a microsoft or 3rd party tcp autotuner on windows xp?

  Read the article

• Is it possible to add tcp autotuning to windows xp?

  - by Caspin

  I have a network application that needs to send messages at 60 times a second. The messages are usually 300-400 bytes, but can be as large as 1500. The default setting for SO_SNDBUF is too small and limits the number of message that can be sent if the network latency is anything greater then 100ms. The naive solution is to just bump the SO_SNDBUF size to to something large. However, depending on the latency and the packet size that could be anywhere from 64K to 8MB. One of Vista's new features is TCP autotuning. Autotuning monitors the tcp connection and dynamically adjust the buffer sizes to allow for optimal communication. I would like to use auto tuning on our windows xp machine so I don't need to guess what my buffers sizes should be. Is there a way to install either a microsoft or 3rd party tcp autotuner on windows xp?

  Read the article

• Can I use an nVidia Geforce 9600GT for triple-monitor?

  - by John Rudy

  My work PC has (as you can guess from the title) a single Geforce 9600GT card. According to the spec page for this card, both DVI ports are Dual-Link DVI. Both are currently in use on Dell 19" 1280x1024 screens. I'm running Windows 7, with Aero enabled, for what that's worth. What I'm wondering is if I can use a standard DVI splitter cable to drive a third screen from one of the ports -- specifically a Samsung 22" 1680x1050. I'm really outgrowing the two-screen setup, and am strongly considering bringing in my home monitor (which is almost never used) to bolster my usable space. If I can't, then my alternative is to replace one of these Dells with that Samsung, to give me at least a "little" more space. (Before you ask, there's probably no chance I can get my company to spring for a second video card and third monitor. Even if I could, it would not be politically expedient, as a number of my other coworkers are already pretty jealous at my setup.)

  Read the article

• How to calculate Bradford Factors with Excel 2007?

  - by pnuts

  Bradford Factors are used by some to measure the significance of absenteeism and are computed for each individual as S squared * D where S is the number of spells (continuous periods of absence) and D is the sum of the days. The calculation is often made over a rolling 52 weeks. Commercial HR software often has the facility to calculate these factors but a Google search indicates quite a lot of interest without any free solutions. Using units of half a day and including any non-working days in each spell, how does one calculate the factors using Excel 2007?

  Read the article

• Fix a jQuery/HTML5 dynamic content issue by upgrading jQuery

  - by Steve Albers

  The default NuGet template for MVC3 pushes down jQuery 1.5.1.  You can upgrade to a new version (1.7.1 is current when this is written) to avoid a problem with the creation of “unknown” HTML5 tags in IE6-8: Take this sample HTML page using HTML5Shiv to provide support for new HTML5 tags in IE6 – IE8.  The page has a number of <article> tags that are backwards compatible in Internet Explorer 6-8 thanks to the HTML5Shiv. After the article elements there is a jQuery 1.5.1 script tag, and a ready() event handler that appends a footer element with a copyright to each of the article tags.  This appears correctly in IE9, but in older IE browsers the unknown tag problem reappears for the dynamic <footer> elements, even though we have the HTML5Shiv at the top of the page.  The copyright text sits outside of the two separate footer tags. To solve the issue upgrade your jQuery files to an up-to-date version.  For instance in Visual Studio 2010: In the Solution Explorer right click on References and choose Manage NuGet Packages. In the Manage NuGet Packages window select the jQuery item on the middle of the page and click the “Upgrade” button. You may need to upgrade your script src references to point at the new version. Using the updated jQuery library the incorrect tags should disappear and styles should work properly:   You can find more information about the issue on the jQuery Bug Tracker site.

  Read the article

• Suggestions for Summer Intern Application Assignments

  - by orangepips

  As part of our application process we want prospective college interns to complete an assignment on their own - either programming or analytical - to give us something tangible to evaluate such as code or a flowchart. I have two ideas for these assignments, one programming and one analytical, I am interested in gathering feedback about these. Programming Assignment Generate an a month's calendar for a given date. The first row should indicate the days of the week (e.g. Sunday - Saturday). Each subsequent row should contain a week's days. The date supplied should be highlighted (e.g. bolded). I am thinking we'll probably proscribe the output format even more strictly - probably down to what the HTML source should look like including CSS classes. Thinking is this forces answerers to actually do some work if they merely copy a solution from the internet. Analytical Assignment Diagram or describe in prose a system for managing a set of traffic lights for traffic at a four way intersection. Each direction (i.e. North, South, East and West) has two lanes (i.e. right and left). The left lane is turn only and has green arrow light to indicate right of way. The system is able to detect if lanes have cars in them and change the lights accordingly. I would expect a flow chart or some prose describing a finite state machine that deals with each contingency. This would hopefully provide some indication of the applicant's ability to reason through a logic problem of sorts and articulate an approach for solving. Areas Seeking Feedback Is it unreasonable to ask this of applicants? If not, is it better to request before or after a phone screen? Are these questions too hard or easy for a collegiate audience? Any suggestions for alternate questions? Do these seem like good tools for analyzing people who would part of a software development life cycle? Programming language suggestions - I'm thinking Java, Python and/or C# (we're actually a ColdFusion shop).

  Read the article

• CentOS: safe to yum reinstall after removing 32-bit packages?

  - by virtualeyes

  as per the CentOS FAQ on removing 32-bit packages present in a 64-bit install, is it safe to perform the last step: You may also want to do this: yum reinstall \* The reason is that sometimes the /usr/share/ items (shared between BOTH packages) get removed when removing the 32-bit RPM packages. on an existing installation? (i.e. where data & settings of possibly affected applications need to be preserved) rpm -Va shows a number of entries like: /sbin/ethtool: at least one of file's dependencies has changed since prelinking S.?..... /sbin/ethtool /usr/libexec/mysqld: at least one of file's dependencies has changed since prelinking S.?..... /usr/libexec/mysqld along with /usr/share entries with T flag (apparently filetime diff, seems safe) The machine is up & running fine, but may not be whenever a reboot occurs. Clue-in as to the real state of the machine (hosed or OK) appreciated Thanks

  Read the article

• Oracle VM Virtualbox 4.0 extension packs

  - by wim.coekaerts

  Some people have asked what this new extension pack is in Oracle VM Virtualbox 4.0 and how it's different from 3.2 and earlier releases. The extension pack is a restructuring of how Oracle VM VirtualBox is installed. Please take a look at http://virtualbox.org and read up on what the product install looked like prior to 4.0, you'll see the following : There were 2 versions to download : - Oracle VM VirtualBox (open source edition) OSE - download of the source tarball with a GPL license + compile needed to run. - Oracle VM VirtualBox PUEL (personal use/eval license) - download of an installable binary with a number of additional non-gpl license drivers, usb2, sata, pxe boot for e1000, vrdp server etc., all built in to the install. This contained the OSE edition + additional drivers with the installer. Customers could purchase an enterprise software license for the latter version. To make it easier to build and release additional drivers, they have been separated out and are now installed through an "extension pack" starting with Oracle VirtualBox version 4. This extension pack is still licensed the same way as in every prior version, via a PUEL license or with the ability to purchase a commercial license. It is now also possible for other companies or users that want to add extensions to do so by creating a similar extension pack -- and there's no need to do a new release of the entire product to do so. So it's a more flexible structure for installing VirtualBox and drivers and allows for more modular additions. The source code of Oracle VM Virtualbox is, of course, still available just like in 3.x, for 4.0. Like 3.x, not for the additional drivers which are now in the extension pack.

  Read the article

• You wouldn&rsquo;t drink 9 year old milk would you?

  - by Jim Duffy

  This is an absolutely brilliant campaign to urge users that its time to move on from IE 6. I like how it puts it terms that everyone can understand and has probably experienced at one time or another. How many times have you opened the milk, took a sniff, and experienced that visceral reaction that accompanies catching a whiff of milk that has turned to the dark side of the force? I call it Darth Vader milk. :-) Of course I’m assuming that you haven’t used IE 6 for a long time now. It is our responsibility as information technology workers to communicate to our friends and family how lame using IE 6 is. Shame them into upgrading if necessary. I don’t care how you get through to them but get through. Tell them that only losers use IE 6. Tell them you’ll cut them out of the your will. Tell them they’re banned from your annual BBQ blowout. Tell them that [insert their favorite celebrity’s name here] thinks people using IE6 are losers.  :-) Seriously, IE6 sucks and blows at the same time and has got to go for a number of reasons including the security leaks that come with using it. Confidentially, I urge them to upgrade for purely selfish reasons. Because I am the first level of computer support for waaaaaay to many of my family members I always advocate they use a current browser (IE 8 or Firefox) and anti-virus software (AVG). Call me selfish but I’d rather not waste my time dealing with a virus or malware that could potentially slip through with IE6. Yes, I’m selfish with my time that way. :-) Have a day. :-|

  Read the article

< Previous Page | 722 723 724 725 726 727 728 729 730 731 732 733  | Next Page >