Search Results

Search found 10844 results on 434 pages for 'device mapper'.

Page 73/434 | < Previous Page | 69 70 71 72 73 74 75 76 77 78 79 80  | Next Page >

  • apcupsd on Linux does not report on APC BackUPS Pro 900

    - by lserni
    From what documentation I could find, the UPS should be (is!) supported by Linux and ought to work with apcupsd. I looked for specific problems such as the infamous Microlink protocol, and found none. I have found a feedback from a guy in UK that reports using this very model on a not-too-different OS version (his OpenSuSE 12.1, mine 12.3 x86_64). The USB port is detected, lsusb reports Bus 002 Device 003: ID 051d:0002 American Power Conversion Uninterruptible Power Supply and lsusb -v -s002:003 confirms and expands: Bus 002 Device 003: ID 051d:0002 American Power Conversion Uninterruptible Power Supply Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x051d American Power Conversion idProduct 0x0002 Uninterruptible Power Supply bcdDevice 0.90 iManufacturer 1 American Power Conversion iProduct 2 Back-UPS RS 900G FW:879.L4 .I USB FW:L4 bNumConfigurations 1 Configuration Descriptor: [...] Interface Descriptor: [...] bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 No Subclass bInterfaceProtocol 0 None iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.00 bCountryCode 33 US bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 1134 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 100 Device Status: 0x0000 (Bus Powered) The kernel recognizes this and duly sets up crw------- 1 root root 180, 96 Nov 4 16:11 /dev/usb/hiddev0 As far as I know, everything is as it should be. I have put the standard configuration in /etc/apcupsd/apcupsd.conf (which is Unix-terminated, ASCII-only, no BOM (just in case)) UPSCABLE usb UPSTYPE usb DEVICE (I have also tried commenting out DEVICE, and setting a device of /dev/puppa results in an access attempt to /dev/puppa, not some /var/lib/dev/puppa or /dev/puppa\r\n). Yet, what apcaccess tells me is VERSION : 3.14.10 (13 September 2011) suse CABLE : USB Cable DRIVER : USB UPS Driver UPSMODE : Stand Alone STARTTIME: 2013-11-04 16:24:22 +0100 MODEL : STATUS : NOBATT LINEV : 000.0 Volts LOADPCT : 0.0 Percent Load Capacity BCHARGE : 000.0 Percent TIMELEFT : 0.0 Minutes MBATTCHG : 5 Percent MINTIMEL : 3 Minutes MAXTIME : 0 Seconds SENSE : Low LOTRANS : 000.0 Volts HITRANS : 000.0 Volts It doesn't recognize the model, and reports no battery (and no voltage). This confirms that it's not the Microlink problem, or it would report the battery status, if precious little else. If I disconnect the USB cable, I get an apcupsd message to the effect that communications have been lost; and I get the "communication restored" broadcast too, if I reconnect the cable. apcupsd is monitoring. So everything tells me that it should work -- only it doesn't. Does anyone spot what I'm missing?

    Read the article

  • What's the weirdest thing you've ever seen a non-techie do to a computing device?

    - by googletorp
    I thought it would be fun to bring out the stories on what people have done throughout the ages with computers due to their sometimes, to put it politely, less than perfect grasp of technology. I'll start out with a little story from my high-school days. After graduation, a classmate of mine, who took IT and subsequently scored an A in the subject, was sent an e-mail by a friend. She replied to his mail: "I'm sorry, but I can't reply your mail, since I don't have your email address." Till this day I still can't understand why she gave such a weird reply as she was a bright girl although not a techie. Now, let's hear those other battle stories from the real world...

    Read the article

  • What parameters to mdadm, to re-create md device with payload starting at 0x22000 position on backing storage?

    - by Adam Ryczkowski
    I try to recover from mdadm raid disaster, which happened when moving from ubuntu server 10.04 to 12.04. I know the correct order of devices from dmesg log, but given this information, I still cannot access the data. The superblocks look messy; the mdadm --examine for each disk is on this question on askubuntu By inspecting the raw contents of backing storage, I found the beginning of my data (the LUKS container in my case) at position 0x22000 relative to the beginning of the first partition in the raid. Question: What is the combination of options issued to "mdadm --create" to re-create mdadm that starts with the given offset? Bitmap size? PS. The relevant information from syslog when the system was healthy are pasted here.

    Read the article

  • Create access point (uap0) on debian 7(arm) - not found?

    - by ethrbunny
    I'm working with a fanless PC that has an ARM chipset, 2 eth plugs and a wifi card (among other things). If I install debian 6 on it all three network interfaces are available at boot time. Today I tried to install debian 7 and had numerous errors indicating that the wireless card isn't supported. uap0: error fetching interface information: Device not found SIOCSIFADDR: No such device uap0: ERROR while getting interface flags: No such device uap0: ERROR while getting interface flags: No such device No such device ERR:UAPHOSTCMD is not supported by uap0 ERR:Command sending failed! No such device ERR:UAPHOSTCMD is not supported by uap0 ERR:Command sending failed! I've tried comparing the kernel module list to the working system but there are too many other differences to make something obvious enough (to me) stand out. How would I get started debugging this problem?

    Read the article

  • How to free up block device that is mounted to an inaccessible place?

    - by Vi
    root@vi-notebook:~# cat /proc/mounts | grep raidy /dev/md0 /root/e/i/wpc2/boot/mnt/raidy reiserfs ro,nosuid,nodev,noexec,noatime 0 0 root@vi-notebook:~# umount -n /root/e/i/wpc2/boot/mnt/raidy umount: /root/e/i/wpc2/boot/mnt/raidy: Transport endpoint is not connected root@vi-notebook:~# mount /dev/md/raidy /mnt/raidy/ -t reiserfs -o nodev,nosuid,noexec,acl,noatime mount: /dev/md0 already mounted or /mnt/raidy/ busy The only workaround I found is: root@vi-notebook:~# losetup /dev/loop0 /dev/md/raidy root@vi-notebook:~# mount /dev/loop0 /mnt/raidy/ -t reiserfs -o nodev,nosuid,noexec,acl,noatime

    Read the article

  • Help me find the offending process waking my Windows 7 PC from hibernate every night

    - by DavidGugick
    Recently my Windows 7 64-bit PC has started waking every night from hibernation around 3:30am. I have done the following to try and figure out what is causing the issue with no luck: Examined the Windows Event logs. Nothing is noted Ran powercfg -lastwake and that reports nothing c:\powercfg -lastwake Wake History Count - 1 Wake History [0] Wake Source Count - 0 Ran powercfg to find what devices are armed for wake. Interestingly, this reports two items (I've already unchecked the "Allow this device to wake the computer" in device manager): The keyboard and something called the "eHome Infrared Receiver (USBCIR)". This is a desktop PC and it does not have an Infrared received, so I'm not sure what that device is. Suffice to say it does not have the option to "Allow device to wake..." available in Device Manager. C:\powercfg -devicequery wake_armed eHome Infrared Receiver (USBCIR) HID Keyboard Device My next step is to disable the Keyboard from wake, but I'm not convined that's the problem. This is on a Dell XPS435 if that helps anyone.

    Read the article

  • How to display incoming trunk name at called device end with Asterisk?

    - by netmano
    We have an Asterisk with FreePBX, and using Grandstream and Panasonic VoIP phones. Now when an incoming call rings on the phones only displays "Line 1" (as it is configured at account 1 on phone) and the caller number. We would need to see the trunk name where the call comes. Please, suggest how can be achieved. I was wondering about rewriting the callerID to extend by the trunk name (like "LP - +12345").

    Read the article

  • SQL Server backup/restore error: The Media Family on Device is Incorrectly Formed.

    - by Chris
    Basically, I'm having this issue: http://www.sqlcoffee.com/Troubleshooting047.htm What I'm doing is running a script I found online (http://pastebin.com/3n0ZfybL) to do a full backup, then rar'ing up the file and moving it to my computer. The CRC of the backup file inside the rar is correct on both computers, so there is no problem with data being corrupted when I transfer it. But then I go and try to restore the database on my dev computer here and I get the errors "sql server cannot process this media family" ... "msg 3013". Why is this happening? I'd test out the backup on the server I'm getting it from, but it's a production server.

    Read the article

  • When disabling the firewire-driver in Windows will this too disable firewire connected through a PCMCIA device?

    - by Christoffer
    The broader overarching question (not seeking an answer to this, but wanted to provide context) is how do I ensure that laptops running Microsoft Windows 7 and exposing DMA-ports (eg. firewire) are disabled once the operating system have loaded. Preventing the Firewire-driver from loading once Windows have booted works as expected, but I've been unable to confirm whether this too will disable a Firewire-port exposed through a PCMCIA-card. My question is hence whether disabling the Firewire-driver will also prevent a Firewire-port exposed through a PCMCIA from functioning?

    Read the article

  • What to do when a device has no driver for Windows 7 but it has Vista, XP drivers

    - by Mehper C. Palavuzlar
    This has always been a bothersome matter for me. Some devices (printers, scanners, etc.) have drivers for older versions of Windows (Vista, XP, 2000, NT) but no driver for Windows 7. What are my chances to install such devices on Windows 7? Example case: I have a Sharp printer & scanner (Sharp AR-122E N) which I have used for my old Windows XP based PC. Now I want to install it on a Windows 7 x64 based PC. Windows 7 cannot load its driver. I used the original driver CD but when I run the setup.exe (which is included in AR122EN111.exe, 6713KB), it says Cannot install driver on this operating system. Supported operating systems are: Windows 2000, XP, Vista. I tried to install the driver using compatibility settings. I tried Windows Vista and Windows XP SP3, but to no avail. The setup gave the same error. I also googled for Windows 7 driver for "Sharp AR-122E N" but it only listed the original driver that I tried. The official site of Sharp does not even list the driver for this product. In the past, the compatibility setting workaround did work for some devices, but this time it failed. What else can I do to overcome this problem?

    Read the article

  • Ubuntu stopped recognizing my iPod

    - by flashnode
    Rythmbox on Ubuntu 10.10 used to recognize my 3rd gen Nano and transfer mp3s. Now I plug it in and Ubuntu doesn't pop-up that box that asks what you want to do anymore. It is only recognized if I reboot and the thing is plugged in. Here is the output to 'lsusb -v -s bus:device' Bus 001 Device 008: ID 05ac:1262 Apple, Inc. iPod Nano 3.Gen Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x05ac Apple, Inc. idProduct 0x1262 iPod Nano 3.Gen bcdDevice 0.01 iManufacturer 1 Apple Inc. iProduct 2 iPod iSerial 3 000A27001A670128 bNumConfigurations 2 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 149 bNumInterfaces 3 bConfigurationValue 2 iConfiguration 4 iPod USB Interface bmAttributes 0xc0 Self Powered MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 1 Audio bInterfaceSubClass 1 Control Device bInterfaceProtocol 0 iInterface 0 AudioControl Interface Descriptor: bLength 9 bDescriptorType 36 bDescriptorSubtype 1 (HEADER) bcdADC 1.00 wTotalLength 30 bInCollection 1 baInterfaceNr( 0) 1 AudioControl Interface Descriptor: bLength 12 bDescriptorType 36 bDescriptorSubtype 2 (INPUT_TERMINAL) bTerminalID 1 wTerminalType 0x0201 Microphone bAssocTerminal 2 bNrChannels 2 wChannelConfig 0x0003 Left Front (L) Right Front (R) iChannelNames 0 iTerminal 0 AudioControl Interface Descriptor: bLength 9 bDescriptorType 36 bDescriptorSubtype 3 (OUTPUT_TERMINAL) bTerminalID 2 wTerminalType 0x0101 USB Streaming bAssocTerminal 1 bSourceID 1 iTerminal 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 1 bNumEndpoints 1 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 AudioStreaming Interface Descriptor: bLength 7 bDescriptorType 36 bDescriptorSubtype 1 (AS_GENERAL) bTerminalLink 2 bDelay 1 frames wFormatTag 1 PCM AudioStreaming Interface Descriptor: bLength 35 bDescriptorType 36 bDescriptorSubtype 2 (FORMAT_TYPE) bFormatType 1 (FORMAT_TYPE_I) bNrChannels 2 bSubframeSize 2 bBitResolution 16 bSamFreqType 9 Discrete tSamFreq[ 0] 8000 tSamFreq[ 1] 11025 tSamFreq[ 2] 12000 tSamFreq[ 3] 16000 tSamFreq[ 4] 22050 tSamFreq[ 5] 24000 tSamFreq[ 6] 32000 tSamFreq[ 7] 44100 tSamFreq[ 8] 48000 Endpoint Descriptor: bLength 9 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x00c0 1x 192 bytes bInterval 4 bRefresh 0 bSynchAddress 0 AudioControl Endpoint Descriptor: bLength 7 bDescriptorType 37 bDescriptorSubtype 1 (EP_GENERAL) bmAttributes 0x01 Sampling Frequency bLockDelayUnits 0 Undefined wLockDelay 0 Undefined Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 No Subclass bInterfaceProtocol 0 None iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.01 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 208 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 1 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 2 Device Status: 0x0000 (Bus Powered) This ubuntu forum told me to check the automount settings under /apps/nautilus/preferences/media_automount_open in gconf-editor. And I did that. Any clues?

    Read the article

  • Is it possible to run an Automator workflow when a USB device is connected?

    - by pkaeding
    I would like to run an Automator workflow every time I connect a certain thumbdrive to my OS X Snow Leopard system. This workflow will copy certain files from my hard drive onto the thumb drive. I have the workflow part figured out, but I don't know how to trigger it. Ideally, I wouldn't need to do anything; it would run as soon as the drive is mounted. Is this possible? Am I approaching this from the wrong angle? The solution only really needs to work on Snow Leopard. Thanks!

    Read the article

  • How can I setup OpenVPN with IPv4 and IPv6 using a tap device?

    - by Lekensteyn
    I've managed to setup OpenVPN for full IPv4 connectivity using tap0. Now I want to do the same for IPv6. Addresses and network setup (note that my real prefix is replaced by 2001:db8): 2001:db8::100:0:0/96 my assigned IPv6 range 2001:db8::100:abc:0/112 OpenVPN IPv6 range 2001:db8::100:abc:1 tap0 (on server) (set as gateway on client) 2001:db8::100:abc:2 tap0 (on client) 2001:db8::1:2:3:4 gateway for server Home laptop (tap0: 2001:db8::100:abc:2/112 gateway 2001:db8::100:abc:1/112) | | | (running Kubuntu 10.10; OpenVPN 2.1.0-3ubuntu1) | wifi | | router | | OpenVPN INTERNET | eth0 | /tap0 VPS (eth0:2001:db8::1:2:3:4/64 gateway 2001:db8::1) (tap0: 2001:db8::100:abc:1/112) (running Debian 6; OpenVPN 2.1.3-2) The server has both native IPv4 and IPv6 connectivity, the client has only IPv4. I can ping6 to and from my server over OpenVPN, but not to other machines (for example, ipv6.google.com). net.ipv6.conf.all.forwarding is set to 1, I've tried disabling net.ipv6.conf.all.accept_ra as well, without luck. Using tcpdump on both the server and client, I can see that packets are actually transferred over tap0 to eth0. The router (2001:db8::1) send a neighbor solicitation for the client (2001:db8::100:abc:2) to eth0 after it receives the ICMP6 echo-request. The server does not respond to that solicitation, which causes the ICMP6 echo-request not be routed to the destination. How can I make this IPv6 connection work?

    Read the article

  • How can I make IPv6 on OpenVPN work using a tap device?

    - by Lekensteyn
    I've managed to setup OpenVPN for full IPv4 connectivity using tap0. Now I want to do the same for IPv6. Addresses and network setup (note that my real prefix is replaced by 2001:db8): 2001:db8::100:0:0/96 my assigned IPv6 range 2001:db8::100:abc:0/112 OpenVPN IPv6 range 2001:db8::100:abc:1 tap0 server side (set as gateway on client) 2001:db8::100:abc:2 tap0 client side 2001:db8::1:2:3:4 gateway for server Home laptop (tap0: 2001:db8::100:abc:2/112 gateway 2001:db8::100:abc:1/112) | | | (running Kubuntu 10.10; OpenVPN 2.1.0-3ubuntu1) | wifi | | router | | OpenVPN INTERNET | eth0 | /tap0 VPS (eth0:2001:db8::1:2:3:4/64 gateway 2001:db8::1) (tap0: 2001:db8::100:abc:1/112) (running Debian 6; OpenVPN 2.1.3-2) The server has both native IPv4 and IPv6 connectivity, the client has only IPv4. I can ping6 to and from my server over OpenVPN, but not to other machines (for example, ipv6.google.com). Using tcpdump on both the server and client, I can see that packets are actually transferred over tap0 to eth0. The router (2001:db8::1) send a neighbor solicitation for the client (2001:db8::100:abc:2) to eth0 after it receives the ICMP6 echo-request. The server does not respond to that solicitation, which causes the ICMP6 echo-request not be routed to the destination. How can I make this IPv6 connection work?

    Read the article

  • Is there any way to see the contents of a device via windows media player/sync?

    - by snorfys
    I've got a sansa clip mp3 player and an htc touch pro 2 phone that I put music/audio books etc. on. Putting stuff on there is easy peasy I open media player 11, go to the sync tab at the right and drag media to it. The problem is seeing what's already on there and removing anything I no-longer want on there - I have no way to see that aside from browsing via explorer. Both devices move media around to specifc folders so it's a bit annoying. Is there any way to do what I need in media player or is there any other good and free alternatives that will?

    Read the article

  • Can I create a virtual network interface to connect to a real network device?

    - by michelemarcon
    I have a networked windows pc with 2 network interfaces. The first connects to a lan with ip address 10.1.. The second connects to another lan with ip address 10.2.. Maybe it's a dumb question, however is it possible to virtualize the second network interface, so that the pc can connect to the 2 lans? If necessary, I may switch to linux or paravirtualization. CLARIFICATION: I want to send DHCP broadcast packets on the second lan, but not on the first lan. I want to do it with one single physical network interface. At the moment, I'm not using any virtualization software.

    Read the article

  • solaris + EMC + power-path

    - by yael
    please advice - when I run powercf command on my Solaris machine , which changes this command do on the EMC storage , or on Solaris file system ? from maanual page: DESCRIPTION During system boot on Solaris hosts, the powercf utility configures PowerPath devices by scanning the HBAs for both single-ported and multiported storage system logical dev- ices. (A multiported logical device shows up on two or more HBAs with the same storage system subsystem/device identity. The identity comes from the serial number for the logical device.) For each storage system logical device found in the scan of the HBAs, powercf creates a corresponding emcpower device entry in the emcp.conf file, and it saves a primary path and an alternate primary path to that device.

    Read the article

  • Use a media player in Linux just to play files from an iPod device (no sync, no manage, just play)?

    - by Somebody still uses you MS-DOS
    I have an ipod classic 160gb, that I sync with my machine at home. I use Linux at work, and want to just plug my ipod and just listen to the tracks, with all the playlists and such. I don't want to sync nothing, I just want to listen to the tracks as if I was using the ipod itself. Why? Because this way I can use the usb port. So, I don't want to manage my ipod in Linux, I just want to listen to the tracks on it in Linux, like it was a local library but it's instead in my ipod. (I've tried gtkpod, it works to show my files, but I can't play, shuffle, etc. It would be interesting to have a complete audio software to handle everything like it was a local library)

    Read the article

  • How to switch a Sound Ouput Device before the Mac goes to sleep?

    - by Konzepz
    I've connected my MacBook to a set of external speakers with a USB. Now, every time the computer goes to Sleep Mode, there's an awful static sound coming from the speakers. I guess this is some bad wiring; but that's what I've got. However, I can use an idea for a script (AppleScript, bash, whatever) that will switch off the USB output sound in (System Preferences) before the computer goes to sleep, and will switch it back on (if exists) on Wake. Any ideas? Thanks!

    Read the article

< Previous Page | 69 70 71 72 73 74 75 76 77 78 79 80  | Next Page >