Search Results

Search found 10844 results on 434 pages for 'device mapper'.

Page 72/434 | < Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >

  • How to inject a key string to andoid device through ADB?

    - by Nandi
    Hi, Can somebody help me for the following. I want to select a perticular string in the list displayed in android phone. If i take example of phone book. i want to pass a person name to the device using adb interface and that name should get highlighted in the list. I tried all adb commands for this but could pass string and key events to the screen but not able to select the respective string. please help. Thanks in advance.

    Read the article

  • What knowledge/expertize is required to port android to custom arm device ?

    - by Sunny
    Hi Friends, I am working on a system on which currently linux kernel and microwindows windowing system is running. Code of current linux system drivers is available to me. I want to port android on it, just as a hobby project. can you please tell me what all understanding of linux-kernel is required to port it? Please give me references (Books, Tutorials) to build-up understandings. Thanks, Sunny. P.S. I have basic understanding of linux. Configuration of device is 450 Mhz ARM9, 64 MB RAM, 256 MB NAND 480x272 resolution.

    Read the article

  • Can I use Duff's Device on an array in C?

    - by Ben Fossen
    I have a loop here and I want to make it run faster. I am passing in a large array. I recently heard of Duff's Device can it be applied to this for loop? any ideas? for (i = 0; i < dim; i++) { for (j = 0; j < dim; j++) { dst[RIDX(dim-1-j, i, dim)] = src[RIDX(i, j, dim)]; } }

    Read the article

  • Why do .png backgrounds appear black on iPhone device but not simulator?

    - by David Rea
    I started with a .tiff file and used GraphicConverter to change it to a .png and set a transparency color. Worked fine in the simulator but when I pushed to the device the transparency color became black. Tested with a .png I downloaded from the net and that worked fine, so it seems to only happen with some files. Thus I suspect it has something to do with the way GraphicConverter writes the .pngs, but I don't know enough about file formats to debug it. Any ideas/suggestions? Ideally I'd like to programatically treat all .pngs because my app allowed dynamic loading of arbitrary files, so I can't verify the transparency beforehand.

    Read the article

  • What is the preferred method of device-specific rendering in .net websites?

    - by alimac83
    I'm working on a website using webforms (although I'd be keen to hear how this works with MVC) and I'm trying to figure out the best approach for rendering content for mobile devices. Usually when I'm working on sites that have to be viewed on mobile devices, I use media queries to style the content differently. The problem is that in my current scenario I'm trying to display different content altogether, rather than just changing the layout of existing content. What's the preferred approach for this? I've had a look at 'device specific rendering' on msdn (http://msdn.microsoft.com/en-us/library/hkx121s4.aspx) although I'm not sure if this is a good approach? What are the pros/cons/alternatives? Thank you EDIT: I've found this but it's for use with mvc4, not webforms. EDIT #2: I think I've found what I'm after here but is this a good approach?

    Read the article

  • Trying to draw textured triangles on device fails, but the emulator works. Why?

    - by Dinedal
    I have a series of OpenGL-ES calls that properly render a triangle and texture it with alpha blending on the emulator (2.0.1). When I fire up the same code on an actual device (Droid 2.0.1), all I get are white squares. This suggests to me that the textures aren't loading, but I can't figure out why they aren't loading. All of my textures are 32-bit PNGs with alpha channels, under res/raw so they aren't optimized per the sdk docs. Here's how I am loading my textures: private void loadGLTexture(GL10 gl, Context context, int reasource_id, int texture_id) { //Get the texture from the Android resource directory Bitmap bitmap = BitmapFactory.decodeResource(context.getResources(), reasource_id, sBitmapOptions); //Generate one texture pointer... gl.glGenTextures(1, textures, texture_id); //...and bind it to our array gl.glBindTexture(GL10.GL_TEXTURE_2D, textures[texture_id]); //Create Nearest Filtered Texture gl.glTexParameterf(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_MIN_FILTER, GL10.GL_NEAREST); gl.glTexParameterf(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_MAG_FILTER, GL10.GL_LINEAR); //Different possible texture parameters, e.g. GL10.GL_CLAMP_TO_EDGE gl.glTexParameterf(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_WRAP_S, GL10.GL_REPEAT); gl.glTexParameterf(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_WRAP_T, GL10.GL_REPEAT); //Use the Android GLUtils to specify a two-dimensional texture image from our bitmap GLUtils.texImage2D(GL10.GL_TEXTURE_2D, 0, bitmap, 0); //Clean up bitmap.recycle(); } Here's how I am rendering the texture: //Clear gl.glClear(GL10.GL_COLOR_BUFFER_BIT | GL10.GL_DEPTH_BUFFER_BIT); //Enable vertex buffer gl.glEnableClientState(GL10.GL_VERTEX_ARRAY); gl.glEnableClientState(GL10.GL_TEXTURE_COORD_ARRAY); gl.glVertexPointer(3, GL10.GL_FLOAT, 0, vertexBuffer); gl.glTexCoordPointer(2, GL10.GL_FLOAT, 0, textureBuffer); //Push transformation matrix gl.glPushMatrix(); //Transformation matrices gl.glTranslatef(x, y, 0.0f); gl.glScalef(scalefactor, scalefactor, 0.0f); gl.glColor4f(1.0f,1.0f,1.0f,1.0f); //Bind the texture gl.glBindTexture(GL10.GL_TEXTURE_2D, textures[textureid]); //Draw the vertices as triangles gl.glDrawElements(GL10.GL_TRIANGLES, indices.length, GL10.GL_UNSIGNED_BYTE, indexBuffer); //Pop the matrix back to where we left it gl.glPopMatrix(); //Disable the client state before leaving gl.glDisableClientState(GL10.GL_VERTEX_ARRAY); gl.glDisableClientState(GL10.GL_TEXTURE_COORD_ARRAY); And here are the options I have enabled: gl.glShadeModel(GL10.GL_SMOOTH); //Enable Smooth Shading gl.glEnable(GL10.GL_DEPTH_TEST); //Enables Depth Testing gl.glDepthFunc(GL10.GL_LEQUAL); //The Type Of Depth Testing To Do gl.glEnable(GL10.GL_TEXTURE_2D); gl.glEnable(GL10.GL_BLEND); gl.glBlendFunc(GL10.GL_SRC_ALPHA,GL10.GL_ONE_MINUS_SRC_ALPHA); Edit: I just tried supplying a BitmapOptions to the BitmapFactory.decodeResource() call, but this doesn't seem to fix the issue, despite manually setting the same preferredconfig, density, and targetdensity. Edit2: As requested, here is a screenshot of the emulator working. The underlaying triangles are shown with a circle texture rendered onto it, the transparency is working because you can see the black background. Here is a shot of what the droid does with the exact same code on it: Edit3: Here are my BitmapOptions, updated the call above with how I am now calling the BitmapFactory, still the same results as below: sBitmapOptions.inPreferredConfig = Bitmap.Config.RGB_565; sBitmapOptions.inDensity = 160; sBitmapOptions.inTargetDensity = 160; sBitmapOptions.inScreenDensity = 160; sBitmapOptions.inDither = false; sBitmapOptions.inSampleSize = 1; sBitmapOptions.inScaled = false; Here are my vertices, texture coords, and indices: /** The initial vertex definition */ private static final float vertices[] = { -1.0f, -1.0f, 0.0f, 1.0f, -1.0f, 0.0f, -1.0f, 1.0f, 0.0f, 1.0f, 1.0f, 0.0f }; /** The initial texture coordinates (u, v) */ private static final float texture[] = { //Mapping coordinates for the vertices 0.0f, 1.0f, 1.0f, 1.0f, 0.0f, 0.0f, 1.0f, 0.0f }; /** The initial indices definition */ private static final byte indices[] = { //Faces definition 0,1,3, 0,3,2 }; Is there anyway to dump the contents of the texture once it's been loaded into OpenGL ES? Maybe I can compare the emulator's loaded texture with the actual device's loaded texture? I did try with a different texture (the default android icon) and again, it works fine for the emulator but fails to render on the actual phone. Edit4: Tried switching around when I do texture loading. No luck. Tried using a constant offset of 0 to glGenTextures, no change. Is there something that I'm using that the emulator supports that the actual phone does not? Edit5: Per Ryan below, I resized my texture from 200x200 to 256x256, and the issue was NOT resolved. Edit: As requested, added the calls to glVertexPointer and glTexCoordPointer above. Also, here is the initialization of vertexBuffer, textureBuffer, and indexBuffer: ByteBuffer byteBuf = ByteBuffer.allocateDirect(vertices.length * 4); byteBuf.order(ByteOrder.nativeOrder()); vertexBuffer = byteBuf.asFloatBuffer(); vertexBuffer.put(vertices); vertexBuffer.position(0); byteBuf = ByteBuffer.allocateDirect(texture.length * 4); byteBuf.order(ByteOrder.nativeOrder()); textureBuffer = byteBuf.asFloatBuffer(); textureBuffer.put(texture); textureBuffer.position(0); indexBuffer = ByteBuffer.allocateDirect(indices.length); indexBuffer.put(indices); indexBuffer.position(0); loadGLTextures(gl, this.context);

    Read the article

  • Is it possible to talk to the iPhone simulator/device.

    - by Plumenator
    I need to automate the build/deploy process for my iphone applications from a script. I can use xcodebuild to build the project, then use Applescript to deploy and debug/run the application. Assuming the application will stop by itself after a while, I need to collect the generated logs for verification. But the problem is I have no way to know when the application ended from outside of the application itself. If the running time is fixed, I can again use Applescript to stop the application (Cmd+Shift+Enter). So there has to be a way to connect to the device/simulator and wait on the application somehow.

    Read the article

  • iPhone SDK: How to get 4.0 on a device?

    - by jp chance
    This is a question about installing 4.0 on an 3rd gen iPod Touch. I already have a developer account. I have also downloaded the 4.0 SDK with XCode. I can test the new functionality in the simulator but I want to also try it on my device hence my question. I am looking for instructions on how to get it on my new third gen iPod Touch. Could someone suggest a link that has worked well for them? thanks.

    Read the article

  • "There was an internal API error." while running an app on any iPhone/iPod-touch device

    - by Martin Cowie
    I am in the process of submitting an iPhone app to the app store. While making the final touches to the app I was in the process of compiling and running the app on my iPhone when I got the message ... "There was an internal API error." The console had this to say ... 25/08/2010 10:10:54 Xcode[3556] Failed willExecute: Error Domain=com.apple.platform.iphoneos Code=0 UserInfo=0x2011adec0 "There was an internal API error." -- { NSLocalizedDescription = "There was an internal API error."; NSLocalizedFailureReason = ""; NSLocalizedRecoverySuggestion = ""; } The problem is specific to this project, others projects don't suffer the same problem. The same problem exhibits when moved to another machine, or another mobile device is swapped in. I should be most grateful for any hints or ideas on the subject ...

    Read the article

  • Why are button sizes on Eclipse vs Device not the same.

    - by Mike Droid
    O.k....this is weird. I had my buttons looking fine last week, now something has changed. My buttons on the eclipse emulator are much larger than on my device (Droid 2.1). I checked my skin settings, screen size permissions, density factors....what am I missing? My skin is set to WVGA854, but when the app goes to the phone the buttons are smaller!? Text and pictures are fine...looking the same as the emulator...just the buttons are shrunk! Hmm....I know it has to be something simple...:)

    Read the article

  • Serial connection over a single USB cable (Windows to linux, or linux to linux)

    - by andyortlieb
    I'm helping out with a project for an embedded device that only has USB and no serial. This device is running Linux. These days, when we need to connect to a serial port on a device we typically use a USB to serial adapter (on something like a phone system or a load balancing device, etc). I would like to know if it is possible to have the host device behave as though it were a serial adapter, thus removing the need for one. Given the nature of USB, is this approach even necessary? To recap, I would like to be able to connect a single A-to-A USB cable from my workstation (be it windows or linux) to this device, for the purpose of administration (especially initial setup), using minicom, putty or hyperterminal. Thanks

    Read the article

  • FreeBSD performance tuning. Sysctls, loader.conf, kernel.

    - by SaveTheRbtz
    I wanted to share knowledge of tuning FreeBSD via sysctls, so i'm posting them with comments. Based on Igor Sysoev (author of nginx) presentation about FreeBSD tuning up to 100,000-200,000 active connections. Sysctls are for 7.x FreeBSD. Since 7.2 amd64 some of them are tuned well by default. Prior 7.0 some of them are boot only (set via /boot/loader.conf) or does not exist at all. Highload web server sysctls: # Max. backlog size kern.ipc.somaxconn=4096 # Shared memory // 7.2+ can use shared memory > 2Gb kern.ipc.shmmax=2147483648 # Sockets kern.ipc.maxsockets=204800 # Do not use lager sockbufs on 8.0 # ( http://old.nabble.com/Significant-performance-regression-for-increased-maxsockbuf-on-8.0-RELEASE-tt26745981.html#a26745981 ) kern.ipc.maxsockbuf=262144 # Recive clusters (on amd64 7.2+ 65k is default) # For such high value vm.kmem_size must be increased to 3G #kern.ipc.nmbclusters=229376 # Jumbo pagesize(4k/8k) clusters # Used as general packet storage for jumbo frames # can be monitored via `netstat -m` #kern.ipc.nmbjumbop=192000 # Jumbo 9k/16k clusters # If you are using them #kern.ipc.nmbjumbo9=24000 #kern.ipc.nmbjumbo16=10240 # Every socket is a file, so increase them kern.maxfiles=204800 kern.maxfilesperproc=200000 kern.maxvnodes=200000 # Turn off receive autotuning #net.inet.tcp.recvbuf_auto=0 # Small receive space, only usable on http-server, on file server this # should be increased to 65535 or even more #net.inet.tcp.recvspace=8192 # Small send space is useful for http servers that serve small files # Autotuned since 7.x net.inet.tcp.sendspace=16384 # This should be enabled if you going to use big spaces (>64k) #net.inet.tcp.rfc1323=1 # Turn this off on highspeed, lossless connections (LAN 1Gbit+) #net.inet.tcp.delayed_ack=0 # This feature is useful if you are serving data over modems, Gigabit Ethernet, # or even high speed WAN links (or any other link with a high bandwidth delay product), # especially if you are also using window scaling or have configured a large send window. # You can try setting it to 0 on fileserver with 1GBit+ interfaces # Automatically disables on small RTT ( http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/netinet/tcp_subr.c?#rev1.237 ) #net.inet.tcp.inflight.enable=0 # Disable randomizing of ports to avoid false RST # Before usage check SA here www.bsdcan.org/2006/papers/ImprovingTCPIP.pdf # (it's also says that port randomization auto-disables at some conn.rates, but I didn't tested it thou) #net.inet.ip.portrange.randomized=0 # Increase portrange # For outgoing connections only. Good for seed-boxes and ftp servers. net.inet.ip.portrange.first=1024 net.inet.ip.portrange.last=65535 # Security net.inet.ip.redirect=0 net.inet.ip.sourceroute=0 net.inet.ip.accept_sourceroute=0 net.inet.icmp.maskrepl=0 net.inet.icmp.log_redirect=0 net.inet.icmp.drop_redirect=1 net.inet.tcp.drop_synfin=1 # Security net.inet.udp.blackhole=1 net.inet.tcp.blackhole=2 # Increases default TTL, sometimes useful # Default is 64 net.inet.ip.ttl=128 # Lessen max segment life to conserve resources # ACK waiting time in miliseconds (default: 30000 from RFC) net.inet.tcp.msl=5000 # Max bumber of timewait sockets net.inet.tcp.maxtcptw=40960 # Don't use tw on local connections # As of 15 Apr 2009. Igor Sysoev says that nolocaltimewait has some buggy realization. # So disable it or now till get fixed #net.inet.tcp.nolocaltimewait=1 # FIN_WAIT_2 state fast recycle net.inet.tcp.fast_finwait2_recycle=1 # Time before tcp keepalive probe is sent # default is 2 hours (7200000) #net.inet.tcp.keepidle=60000 # Should be increased until net.inet.ip.intr_queue_drops is zero net.inet.ip.intr_queue_maxlen=4096 # Interrupt handling via multiple CPU, but with context switch. # You can play with it. Default is 1; #net.isr.direct=0 # This is for routers only #net.inet.ip.forwarding=1 #net.inet.ip.fastforwarding=1 # This speed ups dummynet when channel isn't saturated net.inet.ip.dummynet.io_fast=1 # Increase dummynet(4) hash #net.inet.ip.dummynet.hash_size=2048 #net.inet.ip.dummynet.max_chain_len # Should be increased when you have A LOT of files on server # (Increase until vfs.ufs.dirhash_mem becames lower) vfs.ufs.dirhash_maxmem=67108864 # Explicit Congestion Notification (see http://en.wikipedia.org/wiki/Explicit_Congestion_Notification) net.inet.tcp.ecn.enable=1 # Flowtable - flow caching mechanism # Useful for routers #net.inet.flowtable.enable=1 #net.inet.flowtable.nmbflows=65535 # Extreme polling tuning #kern.polling.burst_max=1000 #kern.polling.each_burst=1000 #kern.polling.reg_frac=100 #kern.polling.user_frac=1 #kern.polling.idle_poll=0 # IPFW dynamic rules and timeouts tuning # Increase dyn_buckets till net.inet.ip.fw.curr_dyn_buckets is lower net.inet.ip.fw.dyn_buckets=65536 net.inet.ip.fw.dyn_max=65536 net.inet.ip.fw.dyn_ack_lifetime=120 net.inet.ip.fw.dyn_syn_lifetime=10 net.inet.ip.fw.dyn_fin_lifetime=2 net.inet.ip.fw.dyn_short_lifetime=10 # Make packets pass firewall only once when using dummynet # i.e. packets going thru pipe are passing out from firewall with accept #net.inet.ip.fw.one_pass=1 # shm_use_phys Wires all shared pages, making them unswappable # Use this to lessen Virtual Memory Manager's work when using Shared Mem. # Useful for databases #kern.ipc.shm_use_phys=1 /boot/loader.conf: # Accept filters for data, http and DNS requests # Usefull when your software uses select() instead of kevent/kqueue or when you under DDoS # DNS accf available on 8.0+ accf_data_load="YES" accf_http_load="YES" accf_dns_load="YES" # Async IO system calls aio_load="YES" # Adds NCQ support in FreeBSD # WARNING! all ad[0-9]+ devices will be renamed to ada[0-9]+ # 8.0+ only #ahci_load= #siis_load= # Increase kernel memory size to 3G. # # Use ONLY if you have KVA_PAGES in kernel configuration, and you have more than 3G RAM # Otherwise panic will happen on next reboot! # # It's required for high buffer sizes: kern.ipc.nmbjumbop, kern.ipc.nmbclusters, etc # Useful on highload stateful firewalls, proxies or ZFS fileservers # (FreeBSD 7.2+ amd64 users: Check that current value is lower!) #vm.kmem_size="3G" # Older versions of FreeBSD can't tune maxfiles on the fly #kern.maxfiles="200000" # Useful for databases # Sets maximum data size to 1G # (FreeBSD 7.2+ amd64 users: Check that current value is lower!) #kern.maxdsiz="1G" # Maximum buffer size(vfs.maxbufspace) # You can check current one via vfs.bufspace # Should be lowered/upped depending on server's load-type # Usually decreased to preserve kmem # (default is 200M) #kern.maxbcache="512M" # Sendfile buffers # For i386 only #kern.ipc.nsfbufs=10240 # syncache Hash table tuning net.inet.tcp.syncache.hashsize=1024 net.inet.tcp.syncache.bucketlimit=100 # Incresed hostcache net.inet.tcp.hostcache.hashsize="16384" net.inet.tcp.hostcache.bucketlimit="100" # TCP control-block Hash table tuning net.inet.tcp.tcbhashsize=4096 # Enable superpages, for 7.2+ only # Also read http://lists.freebsd.org/pipermail/freebsd-hackers/2009-November/030094.html vm.pmap.pg_ps_enabled=1 # Usefull if you are using Intel-Gigabit NIC #hw.em.rxd=4096 #hw.em.txd=4096 #hw.em.rx_process_limit="-1" # Also if you have ALOT interrupts on NIC - play with following parameters # NOTE: You should set them for every NIC #dev.em.0.rx_int_delay: 250 #dev.em.0.tx_int_delay: 250 #dev.em.0.rx_abs_int_delay: 250 #dev.em.0.tx_abs_int_delay: 250 # There is also multithreaded version of em drivers can be found here: # http://people.yandex-team.ru/~wawa/ # # for additional em monitoring and statistics use # `sysctl dev.em.0.stats=1 ; dmesg` # #Same tunings for igb #hw.igb.rxd=4096 #hw.igb.txd=4096 #hw.igb.rx_process_limit=100 # Some useful netisr tunables. See sysctl net.isr #net.isr.defaultqlimit=4096 #net.isr.maxqlimit: 10240 # Bind netisr threads to CPUs #net.isr.bindthreads=1 # Nicer boot logo =) loader_logo="beastie" And finally here is my additions to GENERIC kernel # Just some of them, see also # cat /sys/{i386,amd64,}/conf/NOTES # This one useful only on i386 #options KVA_PAGES=512 # You can play with HZ in environments with high interrupt rate (default is 1000) # 100 is for my notebook to prolong it's battery life #options HZ=100 # Polling is goot on network loads with high packet rates and low-end NICs # NB! Do not enable it if you want more than one netisr thread #options DEVICE_POLLING # Eliminate datacopy on socket read-write # To take advantage with zero copy sockets you should have an MTU of 8K(amd64) # (4k for i386). This req. is only for receiving data. # Read more in man zero_copy_sockets #options ZERO_COPY_SOCKETS # Support TCP sign. Used for IPSec options TCP_SIGNATURE options IPSEC # This ones can be loaded as modules. They described in loader.conf section #options ACCEPT_FILTER_DATA #options ACCEPT_FILTER_HTTP # Adding ipfw, also can be loaded as modules options IPFIREWALL options IPFIREWALL_VERBOSE options IPFIREWALL_VERBOSE_LIMIT=10 options IPFIREWALL_DEFAULT_TO_ACCEPT options IPFIREWALL_FORWARD # Adding kernel NAT options IPFIREWALL_NAT options LIBALIAS # Traffic shaping options DUMMYNET # Divert, i.e. for userspace NAT options IPDIVERT # This is for OpenBSD's pf firewall device pf device pflog # pf's QoS - ALTQ options ALTQ options ALTQ_CBQ # Class Bases Queuing (CBQ) options ALTQ_RED # Random Early Detection (RED) options ALTQ_RIO # RED In/Out options ALTQ_HFSC # Hierarchical Packet Scheduler (HFSC) options ALTQ_PRIQ # Priority Queuing (PRIQ) options ALTQ_NOPCC # Required for SMP build # Pretty console # Manual can be found here http://forums.freebsd.org/showthread.php?t=6134 #options VESA #options SC_PIXEL_MODE # Disable reboot on Ctrl Alt Del #options SC_DISABLE_REBOOT # Change normal|kernel messages color options SC_NORM_ATTR=(FG_GREEN|BG_BLACK) options SC_KERNEL_CONS_ATTR=(FG_YELLOW|BG_BLACK) # More scroll space options SC_HISTORY_SIZE=8192 # Adding hardware crypto device device crypto device cryptodev # Useful network interfaces device vlan device tap #Virtual Ethernet driver device gre #IP over IP tunneling device if_bridge #Bridge interface device pfsync #synchronization interface for PF device carp #Common Address Redundancy Protocol device enc #IPsec interface device lagg #Link aggregation interface device stf #IPv4-IPv6 port # Also for my notebook, but may be used with Opteron #device amdtemp # Support for ECMP. More than one route for destination # Works even with default route so one can use it as LB for two ISP # For now code is unstable and panics (panic: rtfree 2) on route deletions. #options RADIX_MPATH # Multicast routing #options MROUTING #options PIM # DTrace options KDTRACE_HOOKS # all architectures - enable general DTrace hooks options DDB_CTF # all architectures - kernel ELF linker loads CTF data #options KDTRACE_FRAME # amd64-only # Adaptive spining in lockmgr (8.x+) # See http://www.mail-archive.com/[email protected]/msg10782.html options ADAPTIVE_LOCKMGRS # UTF-8 in console (9.x+) #options TEKEN_UTF8 #options TEKEN_XTERM # NCQ support # WARNING! all ad[0-9]+ devices will be renamed to ada[0-9]+ #options ATA_CAM # FreeBSD 9+ # Deadlock resolver thread # For additional information see http://www.mail-archive.com/[email protected]/msg18124.html #options DEADLKRES PS. Also most of FreeBSD's limits can be monitored by # vmstat -z and # limits PPS. variety of network counters can be monitored via # netstat -s In FreeBSD-9 netstat's -Q option appeared, try following command to display netisr stats # netstat -Q PPPS. also see # man 7 tuning PPPPS. I wanted to thank FreeBSD community, especially author of nginx - Igor Sysoev, nginx-ru@ and FreeBSD-performance@ mailing lists for providing useful information about FreeBSD tuning. So here is the question: What tunings are you using on yours FreeBSD servers? You can also post your /etc/sysctl.conf, /boot/loader.conf, kernel options, etc with description of its' meaning (do not copy-paste from sysctl -d). Don't forget to specify server type (web, smb, gateway, etc) Let's share experience!

    Read the article

  • Why don't I have write permission to my vmware virtual network device?

    - by Robert Martin
    I want to allow my VMWare machine to force the virtual network it's on into promiscuous mode so I can play around with honeyd. I received an error message that told me to go to http://vmware.com/info?id=161 to allow this behavior. Based on their advice, I did: $ groupadd promiscuous $ cat /etc/group | grep promiscuous promiscuous:x:1002:robert $ usermod -a -G promiscuous robert $ id robert uid=1000(robert) gid=1000(robert) groups=1000(robert),....,1002(promiscuous) $ chgrp newgroup /dev/vmnet8 $ chmod g+rw /dev/vmnet8 $ ls -l /dev/vmnet8 crw-rw---- 1 root promiscuous 119, 8 2012-03-29 10:29 /dev/vmnet8 Looks like I gave RW permission to the promiscuous group, and added myself. Except that VMWare still gives me an error message that says I cannot enter promiscuous mode. To try out the group thing, I tried: $ echo "1" >/dev/vmnet8 bash: /dev/vmnet8: Permission denied That really surprised me: It makes me think that I still haven't properly given myself the correct permissions... What am I missing?

    Read the article

  • How can I connect any USB device to my computer wirelessly?

    - by daviesgeek
    I am trying to connect the Canon 550D wirelessly to my computer so that I can control it from at a distance. It can connect normally via a USB cable, so I was wondering if there was a way to plug a dongle into the computer, and a dongle into the camera so the two can connect. I'm basically looking for a really long USB cord that will work over long distances (200+ feet). Another important factor is that I really would prefer not having use a power cord, rather just plugging in a dongle, as it will make the setup more mobile. Does anything like this exist? (I know that Cables Unlimited had something like what I wanted, but they went out of business last year)

    Read the article

  • WD1000FYPS harddrive is marked 0 mb in 3ware (and no SMART)

    - by osgx
    After reboot my SATA 1TB WD1000FYPS (previously is was "Drive error") is marked 0 mb in 3ware web gui. Complete message: Available Drives (Controller ID 0) Port 1 WDC WD1000FYPS-01ZKB0 0.00 MB NOT SUPPORTED [Remove Drive] SMART gives me only Device Model and ATA protocol version 1 (not 7-8 as it must be for SATA) What does it mean? Just before reboot, when is was marked only with "Device Error", smart was: Device Model: WDC WD1000FYPS-01ZKB0 Serial Number: WD-WCASJ1130*** Firmware Version: 02.01B01 User Capacity: 1,000,204,886,016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Sun Mar 7 18:47:35 2010 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled SMART overall-health self-assessment test result: PASSED SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0003 188 186 021 Pre-fail Always - 7591 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 229 5 Reallocated_Sector_Ct 0x0033 199 199 140 Pre-fail Always - 3 7 Seek_Error_Rate 0x000e 193 193 000 Old_age Always - 125 9 Power_On_Hours 0x0032 078 078 000 Old_age Always - 16615 10 Spin_Retry_Count 0x0012 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0012 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 77 192 Power-Off_Retract_Count 0x0032 198 198 000 Old_age Always - 1564 193 Load_Cycle_Count 0x0032 146 146 000 Old_age Always - 164824 194 Temperature_Celsius 0x0022 117 100 000 Old_age Always - 35 196 Reallocated_Event_Count 0x0032 199 199 000 Old_age Always - 1 197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 What can be wrong with he? Can it be restored? PS new smart is === START OF INFORMATION SECTION === Device Model: WDC WD1000FYPS-01ZKB0 Serial Number: [No Information Found] Firmware Version: [No Information Found] Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 1 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Mon Mar 8 00:29:44 2010 MSK SMART is only available in ATA Version 3 Revision 3 or greater. We will try to proceed in spite of this. SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 82-83 don't show if SMART supported. Checking for SMART support by trying SMART ENABLE command. Command failed, ata.status=(0x00), ata.command=(0x51), ata.flags=(0x01) Error SMART Enable failed: Input/output error SMART ENABLE failed - this establishes that this device lacks SMART functionality. A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options. PPS There was a rapid grow of " 192 Power-Off_Retract_Count " before dying. The hard was used in raid, with several hards from the same fabric packaging box (close id's). The hard drives were placed identically. Rapid means almost linear grow from 300 to 1700 in 6-7 hours. Maximal temperature was 41C. (thanks to munin's smart monitoring)

    Read the article

  • How to fix corrupted filesystem (shows as RAW) in USB device?

    - by Erico Yan
    I would like to ask if you know how to fix a corrupted USB? I've tried the diskpart command but it didn't work. The media is write protected. Do you have any idea that is much better? I need to fix it because I have important files in my flash drive. I really need to retrieve it. I saw that the file system is seen as RAW and is unaccessible. I tried error checking, but it requires you to format it. I tried data recovery software but all files come out corrupted. My USB is Imation 4GB. Any suggestions?

    Read the article

  • SQL Server Express backup/restore error: The Media Family on Device is Incorrectly Formed.

    - by Chris
    Basically, I'm having this issue: http://www.sqlcoffee.com/Troubleshooting047.htm What I'm doing is running a script I found online (http://pastebin.com/3n0ZfybL) to do a full backup, then rar'ing up the file and moving it to my computer. The CRC of the backup file inside the rar is correct on both computers, so there is no problem with data being corrupted when I transfer it. But then I go and try to restore the database on my dev computer here and I get the errors "sql server cannot process this media family" ... "msg 3013". Why is this happening? I'd test out the backup on the server I'm getting it from, but it's a production server. Edit: I was about to say how I wasn't doing anything stupid like trying to restore the database to an earlier version of SQL Server, but apparently I am: From: Microsoft SQL Server 2008 (SP1) - 10.0.2531.0 (Intel X86) Mar 29 2009 10:27:29 Copyright (c) 1988-2008 Microsoft Corporation Express Edition on Windows NT 6.0 (Build 6002: Service Pack 2) To: Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86) Feb 9 2007 22:47:07 Copyright (c) 1988-2005 Microsoft Corporation Express Edition on Windows NT 6.0 (Build 6001: Service Pack 1) Let me get back to this post after I reinstall this.

    Read the article

  • How do you get the IP addresses of KVM guests that are using a Bridge Network Device from the KVM host

    - by slm
    Does anyone know of a way using KVM to find out the IP addresses of KVM guests that are using a bridge interface (br0) through the KVM host? Currently I have br0 setup with a single NIC (eth0) included. The KVM host is a system running CentOS 5.6 in case that matters. The guests are also running CentOS 5.6. BTW, the guests do not just show up in the KVM host's arp table, I'm looking for better solutions and/or leads.

    Read the article

  • Why can I not access the internet when Windows 7 finds no issue with the ethernet connection and the network can see my device?

    - by WannabeCoder
    So I just moved from a house to an apartment. In the house and the apartment I had Uverse set up - and in both I had my desktop connected via a ~40 foot long cat5 cable. However, upon moving to the apartment I found that my ethernet connection no longer provides internet. This would seem like a mundane problem if not for: The router can see the computer on the network Windows 7 (the desktop's OS) detects no problems with the ethernet connection. Connections over the internet (i.e. browser windows, Pandora, etc.) do not immediately fail. Instead they load for 2 minutes and then finally give up. Devices connected over the Wifi (PS4, Laptop) access the internet just fine While removing the cat5 cable from my house, I accidentally damaged the locking tab but managed to bend it back into the appropriate position. I would suspect that a bad cat5 cable might be to blame if not for the above issues (thought I've heard bad cat5 cables cause the most nonsensical problems) and the fact that I tested the cat5 cable by having it share internet between my laptop (working internet) to my desktop and it functioned just fine and provided the desktop with internet. My ipconfig /all successfully finds a default gateway, DHCP server, and DNS server. What could possibly be causing the problem?

    Read the article

  • connecting to bsnl wll, with huawei fixed wireless modem with connected to usb port on linux mint.

    - by Rakesh
    On windows, when I plugged in the usb connector, to the device was recognized as a mass storage device and installed all the drivers, to my computer, then the device, automatically restarted and started behaving like a modem, I'm writing this post, using the same modem, through windows... On linux mint (debian kernel, similar to ubuntu 8.10), the device is recognized as a mass storage device, some times, but, has no programs, useful for linux... When I use the modem on windows and restart the computer and login to linux, the device shows up as "not yet configured" in the terminal command "lsusb"... I googled a lot for solutions, tried many things, atlast, configured it and run the command "wvdial". But, get the error, that the modem is not responding, at last ! :'( Please help me out... Many more people are facing this problem, as I could discover, when I googled for it. this is the website address of huawei, the company of my modem... "www.huawei.com" Specification: model: ETS1220 FEQ: 800M Thank you.

    Read the article

  • How do I enable greedy MigrationHeuristic in Karmic?

    - by Matthew
    My laptop performs very poorly for 2d graphics. For example, Docky's zoom effect and compiz effects are very choppy. In Jaunty, I was able to fix this by adding the following line under the "Device" section in my xorg.conf: Option "MigrationHeuristic" "greedy" In Karmic, there is no xorg.conf by default, so I copied my old one (from Jaunty). However, everything is still slow. Here is my xorg.conf: Section "Device" Identifier "Configured Video Device" Option "MigrationHeuristic" "greedy" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" Device "Configured Video Device" EndSection From googling about, it sounds like "MigrationHeuristic" is only an option for the "EXA" mode, while Karmic has switched the intel driver to "UXA". So I tried adding this line under the "Device" section: Option "AccelMethod" "exa" But this didn't help.

    Read the article

  • USB resets with Ubuntu 9.10

    - by Grumbel
    Since the upgrade to Ubuntu 9.10 I have issues with getting USB device resets on my Maxtor OneTouch USB harddrive: Nov 9 20:54:37 localhost kernel: [32459.100021] usb 2-2: reset high speed USB device using ehci_hcd and address 4 Nov 9 21:54:37 localhost kernel: [36059.100017] usb 2-2: reset high speed USB device using ehci_hcd and address 4 Nov 9 23:24:37 localhost kernel: [41459.112025] usb 2-2: reset high speed USB device using ehci_hcd and address 4 The device itself continues to work fine, the resets however wake the device out of its sleep state and thus cause it to spin up, which is very annoying. Interestingly, as the log shows, the resets happen at pretty regular intervals (i.e. one hour or half an hour), not randomly. An USB card reader seems to have the same issues, while another USB harddrive from a different manufactor works fine on the same PC. What could be causing this and how could I fix it?

    Read the article

  • Skydrive does not synchronize with one device but synchronizes successfully with another one.

    - by Hobbes
    I have an Outlook id. I also have Skydrive installed on my personal laptop (Windows 7 x64). The folders and files synchronize successfully. Today, I installed Skydrive on my office PC and logged in with the same id as above but it does not synchronize any of my folders or files, other than the default ones. When I view the logs (filename: SkyDrive.exe.reg.2012-08-09-150239.654.log), I see the following entry. 09-17-12,13:31:35.075,45a,146c,0,PAL,systeminformationhelper.cpp(661),0,0018E4F8,CRIT,The registry key to block Remote Access is not found.,System Error Code=0x2 Any idea as to what could be the problem?

    Read the article

  • Is it safe to use any USB charger for charging any USB device?

    - by Vineet Menon
    I have an apple USB AC charger which is rated to provide 5V, 1A output and a Sony mp3 player NWZ B143F. I don't know the spec of Sony audio player. But I have another mp3 player from Transcend which is rated to take 5V, 1A input voltage. So, is it safe to assume that Sony or for that matter any mainstream mp3 player would take 5V, 1A as input? Is it safe to use the apple charger with Sony mp3 player?

    Read the article

  • Multi serial devices on one port

    - by adopilot
    I am developing one software for managing parking lot. System is designed to use four HID RFID devices for authorization clients on gates. Each device should be connected to server by Serial port RS232. Now I wondering is there some device or method to join all that devices on one device and after that to I have only one RS232 cable connected to server. My problem is in that RFID card readers are simple (stupid) devices and there I am not able to change anything, but Ill like to know from which specific device is coming input. What Ill want to do with that new device which need to join four readers is to add suffix or prefix to string that sent from RFID card reader. So I can identify device that is sending card number to my server. I am developing my system on Win platforms.

    Read the article

< Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >