Search Results

Search found 41520 results on 1661 pages for 'fault tolerant'.

Page 73/1661 | < Previous Page | 69 70 71 72 73 74 75 76 77 78 79 80  | Next Page >

  • How HP D2700 disk enclosure is monitored for alarms via SNMP

    - by VSAC
    We have HP D2700 disk enclosure and we would like to monitor D2700 (connected to HP Proliant DL360G8) for alarms.I have following questions regarding this. What are the options available for reporting D2700 hardware alarms (disk failure, power failure) via SNMP? We understand the D2700 to have an Ethernet interface for controller A and B and alarms are available via SNMP via this interface. Can anyone provide the actual alarms via this interface? (MIB and alarm list) As we have a number of D2700’s and would like to minimize the number of physical connections to the switch and associated IP addresses; Is there a mechanism to monitor the D2700 from the SCSI connected HPDL360 and raise SNMP alarms from the DL360 for hardware failures on the D2700? If so can anyone provide details and the actual alarms and MIB via this mechanism? Thanks!

    Read the article

  • reverse proxy on PFsense, squid or otherwise

    - by Mustafa Ismail Mustafa
    I've been trying to get this to work for days now and its not working. After bashing my head against the desk enough times, I've decided to man up and ask. I'm desperately trying to set up a reverse proxy on the pfsense box itself. One because its a pretty powerful box and its not being utilized to the maximum at all and two because I don't have any spare machines to setup squid (or any other reverse proxy [capable]) server on. So, on pfsense, everytime I set up rules (on ServicesProxy ServerGeneral) as so: acl surveillance dstdomain surveillance.myweb.local; acl camera dstdomain camera.myweb.local; http_access allow surveillance AND camera (ad nauseum) when I check the services, squid stops and refuses to restart until I remove them pesky acls that are supposed to make my life easier! What am I doing wrong? How can I get it to work? Is there another way/package I can use? Thanks

    Read the article

  • Problem with squid log files

    - by Gatura
    I am using SARG to get a report on the squid log files, I get this result /usr/local/Sarg/bin/sarg -l /usr/local/squid/var/logs/access.log SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% sort: open failed: +6.5nr: No such file or directory SARG: (index) Cannot open file: /Applications/Sarg/reports/index.sort SARG: Records in file: 0, reading: 0.00% What could be the problem?

    Read the article

  • Windows 2003 Domain Controller Very Upset about NIC Teaming

    - by Kyle Brandt
    I set up BACS (Broadcom Teaming) to team two NIC on a Windows 2003 Active Directory Domain Controller. Networking still works okay, I can ping the gateway etc, but both DNS and Active Directory fail to start with various 40xx errors. The team that I created is Smart load Balancing with Failover, with one backup and only one in smart load balancing (So really it is just failover). I have the team the same IP address that the single active NIC had before. Anyone seen this before, or have any ideas what the problem might be? Event Type: Error Event Source: DNS Event Category: None Event ID: 4015 Date: 3/7/2010 Time: 10:33:03 AM User: N/A Computer: ADC Description: The DNS server has encountered a critical error from the Active Directory. Check that the Active Directory is functioning properly. The extended error debug information (which may be empty) is "". The event data contains the error. Event Type: Error Event Source: DNS Event Category: None Event ID: 4004 Date: 3/7/2010 Time: 10:33:03 AM User: N/A Computer: ADC Description: The DNS server was unable to complete directory service enumeration of zone .. This DNS server is configured to use information obtained from Active Directory for this zone and is unable to load the zone without it. Check that the Active Directory is functioning properly and repeat enumeration of the zone. The extended error debug information (which may be empty) is "". The event data contains the error. Event Type: Error Event Source: NTDS Replication Event Category: DS RPC Client Event ID: 2087 Date: 3/7/2010 Time: 10:40:28 AM User: NT AUTHORITY\ANONYMOUS LOGON Computer: ADC Description: Active Directory could not resolve the following DNS host name of the source domain controller to an IP address. This error prevents additions, deletions and changes in Active Directory from replicating between one or more domain controllers in the forest. Security groups, group policy, users and computers and their passwords will be inconsistent between domain controllers until this error is resolved, potentially affecting logon authentication and access to network resources.

    Read the article

  • Why does tracerpt use up all of my Sql Server's memory?

    - by Cypher
    We have a MS Sql Server 2008 machine with 12 GB of RAM... twice now within the last week this server was knocked on its backside by a process called "tracerpt.exe" which was found to have taken up ALL of the system's memory and leaving nothing for sqlserver. Done my homework, figured out what this program is... but still no idea why it's hogging up so much RAM (though I have an idea), nor what application is actually executing it. This server is the back-end to a Microsoft Dynamics CRM 4.0 application which is hosted on a separate server and is our production database used for just about everything. If this program is necessary, I would like to be able to find the application that is executing this thing and remove it or disable whatever feature is causing this quite annoying occurrence. Any ideas?

    Read the article

  • "power limit notification" clobbering on 12G Dell servers with RHEL6

    - by Andrew B
    Server: Poweredge r620 OS: RHEL 6.4 Kernel: 2.6.32-358.18.1.el6.x86_64 I'm experiencing application alarms in my production environment. Critical CPU hungry processes are being starved of resources and causing a processing backlog. The problem is happening on all the 12th Generation Dell servers (r620s) in a recently deployed cluster. As near as I can tell, instances of this happening are matching up to peak CPU utilization, accompanied by massive amounts of "power limit notification" spam in dmesg. An excerpt of one of these events: Nov 7 10:15:15 someserver [.crit] CPU12: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU0: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU6: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU14: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU18: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU2: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU4: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU16: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU0: Package power limit notification (total events = 11) Nov 7 10:15:15 someserver [.crit] CPU6: Package power limit notification (total events = 13) Nov 7 10:15:15 someserver [.crit] CPU14: Package power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU18: Package power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU20: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU8: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU2: Package power limit notification (total events = 12) Nov 7 10:15:15 someserver [.crit] CPU10: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU22: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU4: Package power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU16: Package power limit notification (total events = 13) Nov 7 10:15:15 someserver [.crit] CPU20: Package power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU8: Package power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU10: Package power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU22: Package power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU15: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU3: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU1: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU5: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU17: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU13: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU15: Package power limit notification (total events = 375) Nov 7 10:15:15 someserver [.crit] CPU3: Package power limit notification (total events = 374) Nov 7 10:15:15 someserver [.crit] CPU1: Package power limit notification (total events = 376) Nov 7 10:15:15 someserver [.crit] CPU5: Package power limit notification (total events = 376) Nov 7 10:15:15 someserver [.crit] CPU7: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU19: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU17: Package power limit notification (total events = 377) Nov 7 10:15:15 someserver [.crit] CPU9: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU21: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU23: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU11: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU13: Package power limit notification (total events = 376) Nov 7 10:15:15 someserver [.crit] CPU7: Package power limit notification (total events = 375) Nov 7 10:15:15 someserver [.crit] CPU19: Package power limit notification (total events = 375) Nov 7 10:15:15 someserver [.crit] CPU9: Package power limit notification (total events = 374) Nov 7 10:15:15 someserver [.crit] CPU21: Package power limit notification (total events = 375) Nov 7 10:15:15 someserver [.crit] CPU23: Package power limit notification (total events = 374) A little Google Fu reveals that this is typically associated with the CPU running hot, or voltage regulation kicking in. I don't think that's what is happening though. Temperature sensors for all servers in the cluster are running fine, Power Cap Policy is disabled in the iDRAC, and my System Profile is set to "Performance" on all of these servers: # omreport chassis biossetup | grep -A10 'System Profile' System Profile Settings ------------------------------------------ System Profile : Performance CPU Power Management : Maximum Performance Memory Frequency : Maximum Performance Turbo Boost : Enabled C1E : Disabled C States : Disabled Monitor/Mwait : Enabled Memory Patrol Scrub : Standard Memory Refresh Rate : 1x Memory Operating Voltage : Auto Collaborative CPU Performance Control : Disabled A Dell mailing list post describes the symptoms almost perfectly. Dell suggested that the author try using the Performance profile, but that didn't help. He ended up applying some settings in Dell's guide for configuring a server for low latency environments and one of those settings (or a combination thereof) seems to have fixed the problem. Kernel.org bug #36182 notes that power-limit interrupt debugging was enabled by default, which is causing performance degradation in scenarios where CPU voltage regulation is kicking in. A RHN KB article (RHN login required) mentions a problem impacting PE r620 and r720 servers not running the Performance profile, and recommends an update to a kernel released two weeks ago. ...Except we are running the Performance profile... Everything I can find online is running me in circles here. What's the heck is going on?

    Read the article

  • ESXI Crash need help to understand log and support about nexentastor on virtual machine

    - by Bgnt44
    If i understand right, the following core dump means that the cpu4 has crashed the Host if i read the next line it seem that at the time the CPU 4 was assigned to the NexentaStore Vm ... SO if im right i can say that NexentaStor Vm crash my esxi Am i right ? Does that core dump can provide me some more informations ? 2012-11-14T03:48:01.046Z cpu4:6089)0x41221f25ba08:[0x41803007abff]PanicvPanicInt@vmkernel#nover+0x56 stack: 0x3000000008, 0x41221f25ba 2012-11-14T03:48:01.046Z cpu4:6089)0x41221f25bae8:[0x41803007b4a7]Panic@vmkernel#nover+0xae stack: 0x2e067c00000010, 0x0, 0x1f25bb38, 2012-11-14T03:48:01.047Z cpu4:6089)0x41221f25bc18:[0x4180300a7823]TLBDoInvalidate@vmkernel#nover+0x45a stack: 0xca, 0x0, 0x0, 0x0, 0x0 2012-11-14T03:48:01.047Z cpu4:6089)0x41221f25bc68:[0x418030489e17]UserMem_CartelFlush@<None>#<None>+0xce stack: 0xcaa0b, 0x0, 0x0, 0x4 2012-11-14T03:48:01.047Z cpu4:6089)0x41221f25bd78:[0x41803048ab91]UserMemUnmapStateCleanup@<None>#<None>+0x58 stack: 0x0, 0x41221f25bd 2012-11-14T03:48:01.047Z cpu4:6089)0x41221f25be58:[0x41803048b97d]UserMemUnmap@<None>#<None>+0x104 stack: 0x41221f267000, 0x41221f25bf 2012-11-14T03:48:01.048Z cpu4:6089)0x41221f25be98:[0x41803048bf20]UserMem_Unmap@<None>#<None>+0xe3 stack: 0x426, 0x0, 0x41221f25bef8, 2012-11-14T03:48:01.048Z cpu4:6089)0x41221f25beb8:[0x4180304a5985]UW64VMKSyscallUnpackReleasePhysMemMap@<None>#<None>+0x18 stack: 0x10 2012-11-14T03:48:01.048Z cpu4:6089)0x41221f25bef8:[0x418030476791]User_LinuxSyscallHandler@<None>#<None>+0x17c stack: 0x41803004cc70, 2012-11-14T03:48:01.048Z cpu4:6089)0x41221f25bf18:[0x4180300a82be]User_LinuxSyscallHandler@vmkernel#nover+0x19 stack: 0x3ffe63bed80, 0 2012-11-14T03:48:01.049Z cpu4:6089)0x41221f25bf28:[0x418030110064]gate_entry@vmkernel#nover+0x63 stack: 0x10b, 0x0, 0x0, 0x426, 0xcf76 2012-11-14T03:48:01.049Z cpu4:6089)VMware ESXi 5.1.0 [Releasebuild-799733 x86_64] PCPU 1 locked up. Failed to ack TLB invalidate (total of 1 locked up, PCPU(s): 1). 2012-11-14T03:48:01.050Z cpu4:6089)cr0=0x80010031 cr2=0xcaa0b750 cr3=0x197d7b000 cr4=0x42768 2012-11-14T03:48:01.050Z cpu4:6089)pcpu:0 world:6111 name:"vmm0:Windows_2012_-_SQL" (V) 2012-11-14T03:48:01.050Z cpu4:6089)pcpu:1 world:6032 name:"vmm0:Windows_2012_-_AD" (V) 2012-11-14T03:48:01.050Z cpu4:6089)pcpu:2 world:6098 name:"vmm0:Windows_2012_-_App" (V) 2012-11-14T03:48:01.050Z cpu4:6089)pcpu:3 world:4099 name:"idle3" (IS) 2012-11-14T03:48:01.050Z cpu4:6089)pcpu:4 world:6089 name:"vmx-vcpu-0:NexentaStor" (U) 2012-11-14T03:48:01.050Z cpu4:6089)pcpu:5 world:6134 name:"vmm0:Ubuntu_-_NGINX" (V) 2012-11-14T03:48:01.050Z cpu4:6089)pcpu:6 world:4102 name:"idle6" (IS) 2012-11-14T03:48:01.050Z cpu4:6089)pcpu:7 world:4103 name:"idle7" (IS) 2012-11-14T03:48:01.050Z cpu4:6089)@BlueScreen: PCPU 1 locked up. Failed to ack TLB invalidate (total of 1 locked up, PCPU(s): 1).

    Read the article

  • API numbers don't match on compiled PHP extension

    - by tixrus
    I'm trying to get GD into my PHP. I recently installed PHP5.3.0 on my system running Mac Leopard using mac ports. It did not come with the gd module. So I downloaded gd, compiled it as an extension module as per http://www.kenior.ch/macintosh/adding-gd-library-for-mac-os-x-leopard, made php.ini point to it, restarted apache etc. But no GD. So in apache error log it says PHP Warning: PHP Startup: gd: Unable to initialize module\nModule compiled with module API=20060613\nPHP compiled with module API=20090115\nThese options need to match\n in Unknown on line 0 So a bit of googling says I should not use the phpize I have before configuring and making these. I should use a new one called phpize5. I surely don't have any such thing. Unless its packed up inside something else in my php5.3. distro. Where do you get it. In Ubuntu I could just run sudo apt-get install php-dev, (apparently) and it would just appear by magic. At least that's what the webpage said. Unfortunately I am running MacOSX version Leopard. How can I build this GD module on Leopard so that it will match the API number in my PHP?

    Read the article

  • Add Scheduled Task to reset search indexes for Exchange 2007

    - by Samosa
    I simply want to run a ResetSearchIndex -force on a schedule. What is the correct usage for the command in the Scheduled Task properties? It seems I would first need to start Powershell, then load the console file or snap-in for Exchange, which one of these is the closest: C:\WINDOWS\system32\WINDOW~2\v1.0\POWERS~1.EXE -"D:\Program Files\Microsoft\Exchange Server\Scripts" ResetSearchIndex.ps1 -force dbname or C:\WINDOWS\system32\WINDOW~2\v1.0\POWERS~1.EXE -PSConsoleFile "D:\Program Files\Microsoft\Exchange Server\bin\exshell.psc1" -noexit -command ".'D:\Program Files\Microsoft\Exchange Server\Scripts' ResetSearchIndex.ps1 -force dbname or C:\WINDOWS\system32\WINDOW~2\v1.0\POWERS~1.EXE -PSConsoleFile "D:\Program Files\Microsoft\Exchange Server\bin\exshell.psc1" -noexit -command ".'D:\Program Files\Microsoft\Exchange Server\Scripts\ResetSearchIndex.ps1' -force dbname

    Read the article

  • MDaemon vs Exchange (2007-2010). Which one should we choose ?

    - by Deniz
    We are at the verge of a mail server decision. We do currently use 2 mail servers : MDaemon 10 and Exchange 2003. We are planning to use a company and customer wide one point solution. Our main candidates are MDaemon 11 and Exchange 2007 or 2010. We would like to learn other users experiences on those solutions. The server-side experiences, the user-side experiences, feature set, TCO, support options etc. And if there were other solutions (like MDaemon 11 + Exchange or anything else) what would you suggest ?

    Read the article

  • QLogic QLE8152 won't link up with a fiber loop

    - by Mike Pennington
    I have a Dell R710 running Debian Linux 6.0 (Squeeze). I installed a QLogic QLE8152 CNA in the PCI-E riser today and I have been trying to get the CNA's ethernet layer to come up after I put a fiber loop on it; I also scoped it with a light meter, and the SFP+ transceiver is getting the correct amount of light. The whole time I have been working on this problem, the lights on the CNA are blinking green at a rate of about 1 flash every 3 seconds. When I plug the fiber into a Juniper EX4500 10GE in a rack next to it, the Juniper's link stays down as well. I have to confess that this is my first wrangling with a CNA, so perhaps I'm doing something fundamentally wrong, but here is what I have found so far... First the basics... [mpenning@Finger ~]$ uname -a Linux Finger 2.6.32-5-amd64 #1 SMP Mon Oct 3 03:59:20 UTC 2011 x86_64 GNU/Linux [mpenning@Finger ~]$ cat /etc/issue Debian GNU/Linux 6.0 \n \l [mpenning@Finger ~]$ lspci -v shows that the card is properly installed (physically) 04:00.0 Ethernet controller: QLogic Corp. 10GbE Converged Network Adapter (TCP/IP Networking) (rev 02) Subsystem: QLogic Corp. Device 017e Flags: bus master, fast devsel, latency 0, IRQ 34 I/O ports at e000 [size=256] Memory at df8f0000 (64-bit, non-prefetchable) [size=16K] Memory at df900000 (64-bit, non-prefetchable) [size=1M] Expansion ROM at df800000 [disabled] [size=256K] Capabilities: [44] Power Management version 3 Capabilities: [4c] Express Endpoint, MSI 00 Capabilities: [88] MSI: Enable- Count=1/32 Maskable- 64bit+ Capabilities: [98] Vital Product Data Capabilities: [a0] MSI-X: Enable+ Count=8 Masked- Capabilities: [100] Advanced Error Reporting Capabilities: [138] Device Serial Number 00-c0-dd-ff-fe-1c-53-b4 Capabilities: [144] Power Budgeting <?> Kernel driver in use: qlge The output from ethtool shows that eth4 is the QLE8152... [mpenning@Finger ~]$ sudo ethtool eth4 Settings for eth4: Supported ports: [ FIBRE ] Supported link modes: 10000baseT/Full Supports auto-negotiation: No Advertised link modes: 10000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: No Speed: 10000Mb/s Duplex: Full Port: FIBRE PHYAD: 0 Transceiver: external Auto-negotiation: on Current message level: 0x000060f7 (24823) Link detected: no [mpenning@Finger ~]$ sudo ethtool -i eth4 driver: qlge version: v1.00.00-b3 firmware-version: v1.35.11 bus-info: 0000:04:00.0 [mpenning@Finger ~]$ Finally, I tried modprobe -r qlge; modprobe -r qla2xxx and then modprobe qla2xxx; modprobe qlge to kick the system again... I don't see a smoking gun in /var/log/messages... Nov 17 19:46:21 finger kernel: [ 6212.298275] qlge 0000:04:00.1: PCI INT B disabled Nov 17 19:46:22 finger kernel: [ 6213.779974] qlge 0000:04:00.0: PCI INT A disabled Nov 17 19:46:33 finger kernel: [ 6224.554074] qla2xxx 0000:04:00.3: PCI INT D disabled Nov 17 19:46:33 finger kernel: [ 6224.555322] qla2xxx 0000:04:00.2: PCI INT C disabled Nov 17 19:46:54 finger kernel: [ 6245.625854] QLogic Fibre Channel HBA Driver: 8.03.01-k6 Nov 17 19:46:54 finger kernel: [ 6245.625888] qla2xxx 0000:04:00.2: PCI INT C -> GSI 35 (level, low) -> IRQ 35 Nov 17 19:46:54 finger kernel: [ 6245.626837] qla2xxx 0000:04:00.2: MSI-X vector count: 7 Nov 17 19:46:54 finger kernel: [ 6245.626841] qla2xxx 0000:04:00.2: Found an ISP8001, irq 35, iobase 0xffffc90012664000 Nov 17 19:46:54 finger kernel: [ 6245.627113] qla2xxx 0000:04:00.2: Configuring PCI space... Nov 17 19:46:54 finger kernel: [ 6245.639429] qla2xxx 0000:04:00.2: Configure NVRAM parameters... Nov 17 19:46:54 finger kernel: [ 6245.642597] qla2xxx 0000:04:00.2: Verifying loaded RISC code... Nov 17 19:46:54 finger kernel: [ 6245.642708] qla2xxx 0000:04:00.2: FW: Loading from flash (a0000)... Nov 17 19:46:55 finger kernel: [ 6246.273340] qla2xxx 0000:04:00.2: Allocated (64 KB) for FCE... Nov 17 19:46:55 finger kernel: [ 6246.273401] qla2xxx 0000:04:00.2: Allocated (64 KB) for EFT... Nov 17 19:46:55 finger kernel: [ 6246.273486] qla2xxx 0000:04:00.2: Allocated (1350 KB) for firmware dump... Nov 17 19:46:55 finger kernel: [ 6246.273856] scsi9 : qla2xxx Nov 17 19:46:55 finger kernel: [ 6246.274631] qla2xxx 0000:04:00.2: Nov 17 19:46:55 finger kernel: [ 6246.274633] QLogic Fibre Channel HBA Driver: 8.03.01-k6 Nov 17 19:46:55 finger kernel: [ 6246.274634] QLogic QLE8152 - QLogic PCI-Express Dual Channel 10GbE CNA Nov 17 19:46:55 finger kernel: [ 6246.274636] ISP8001: PCIe (5.0GT/s x4) @ 0000:04:00.2 hdma+, host#=9, fw=5.01.04 (8d4) Nov 17 19:46:55 finger kernel: [ 6246.274666] qla2xxx 0000:04:00.3: PCI INT D -> GSI 37 (level, low) -> IRQ 37 Nov 17 19:46:55 finger kernel: [ 6246.274748] qla2xxx 0000:04:00.3: MSI-X vector count: 7 Nov 17 19:46:55 finger kernel: [ 6246.274751] qla2xxx 0000:04:00.3: Found an ISP8001, irq 37, iobase 0xffffc900125c4000 Nov 17 19:46:55 finger kernel: [ 6246.275098] qla2xxx 0000:04:00.3: Configuring PCI space... Nov 17 19:46:55 finger kernel: [ 6246.287329] qla2xxx 0000:04:00.3: Configure NVRAM parameters... Nov 17 19:46:55 finger kernel: [ 6246.290624] qla2xxx 0000:04:00.3: Verifying loaded RISC code... Nov 17 19:46:55 finger kernel: [ 6246.290736] qla2xxx 0000:04:00.3: FW: Loading from flash (a0000)... Nov 17 19:46:55 finger kernel: [ 6246.920204] qla2xxx 0000:04:00.3: Allocated (64 KB) for FCE... Nov 17 19:46:55 finger kernel: [ 6246.920264] qla2xxx 0000:04:00.3: Allocated (64 KB) for EFT... Nov 17 19:46:55 finger kernel: [ 6246.920345] qla2xxx 0000:04:00.3: Allocated (1350 KB) for firmware dump... Nov 17 19:46:55 finger kernel: [ 6246.920749] scsi10 : qla2xxx Nov 17 19:46:55 finger kernel: [ 6246.921715] qla2xxx 0000:04:00.3: Nov 17 19:46:55 finger kernel: [ 6246.921716] QLogic Fibre Channel HBA Driver: 8.03.01-k6 Nov 17 19:46:55 finger kernel: [ 6246.921717] QLogic QLE8152 - QLogic PCI-Express Dual Channel 10GbE CNA Nov 17 19:46:55 finger kernel: [ 6246.921719] ISP8001: PCIe (5.0GT/s x4) @ 0000:04:00.3 hdma+, host#=10, fw=5.01.04 (8d4) Nov 17 19:46:58 finger kernel: [ 6249.519911] qlge 0000:04:00.0: PCI INT A -> GSI 34 (level, low) -> IRQ 34 Nov 17 19:46:58 finger kernel: [ 6249.533970] qlge 0000:04:00.0: QLogic 10 Gigabit PCI-E Ethernet Driver Nov 17 19:46:58 finger kernel: [ 6249.533975] qlge 0000:04:00.0: Driver name: qlge, Version: v1.00.00-b3. Nov 17 19:46:58 finger kernel: [ 6249.534856] qlge 0000:04:00.0: ql_display_dev_info: Function #0, Port 0, NIC Roll 0, NIC Rev = 1, XG Roll = 0, XG Rev = 1. Nov 17 19:46:58 finger kernel: [ 6249.534860] qlge 0000:04:00.0: ql_display_dev_info: MAC address 00:c0:dd:1c:53:b4 Nov 17 19:46:58 finger kernel: [ 6249.534888] qlge 0000:04:00.1: PCI INT B -> GSI 44 (level, low) -> IRQ 44 Nov 17 19:46:58 finger kernel: [ 6249.549109] qlge 0000:04:00.1: ql_display_dev_info: Function #1, Port 1, NIC Roll 0, NIC Rev = 1, XG Roll = 0, XG Rev = 1. Nov 17 19:46:58 finger kernel: [ 6249.549112] qlge 0000:04:00.1: ql_display_dev_info: MAC address 00:c0:dd:1c:53:b6 Any assistance getting a link up on this is greatly appreciated...

    Read the article

  • Exchange 2007 Email Error 451 4.7.0 Timeout waiting for client input

    - by HK1
    Our SBS 2008 server with Exchange 2007 started rejecting some (most) emails starting about 3 or 4 days ago. The return failure message looks something like this: The error that the other server returned was: 451 451 4.7.0 Timeout waiting for client input (state 18) I've rebooted our Sonicwall TZ-210 router and that doesn't make any difference. I think this problem has something to do with MTU (packet size) but I don't understand why the problem just started now. We haven't made any changes to our network infrastructure for weeks. If I ping our SonicWall (DSL connection, bridge mode) forcing unfragmented packets, I start getting packet dropouts at packet size 1320 or so. Maybe this is completely normal, I'm not sure. I haven't tried rebooting the DSL modem yet because I'm not on site. That's one of the next things I'll try.

    Read the article

  • OSSEC : send alerts true gmail? how?

    - by Rubytastic
    Try to setup OSSEC to use google gmail to send my alerts like so: <email_notification>yes</email_notification> <email_to>[email protected]</email_to> <smtp_server>smtp.gmail.com</smtp_server> <email_from>ossec@host</email_from> Then I set email alerts value to 3 and restart ossec. This does not trigger email alert. how to correctly send alerts with gmail? better way to test if mails are sending out?

    Read the article

  • Problems connecting to MS Dynamics AX 2009 Application Object Server

    - by Sam
    I've got a funny problem connecting to an AOS server. I got a domain network containing a (VM) Server running the Application Object Server (AOS). Client computer A) can connect to the AOS without problems and work. When client computer B) tries to connect, all I get is this error message: Logon Error Connection with the Application Object Server could not be established. The event log of Client B) does not contain any messages about this. Firewalls are off on all three computers (by GP). Tcp/ip from cliebt B) to the AOS server does run fine. Both clients run the same OS (win 7 RC), sit on the same subnet, next to each other. Yesterday it all worked, today just one computer can connect. Any ideas what might cause this problem, how to resolve it, or how to debug it?

    Read the article

  • Mono fast cgi not working on nginx

    - by Luka Horvatic
    I installed mono fast cgi for nginx following instructions on: http://www.mono-project.com/FastCGI_Nginx but when i try to load test aspx file i getting 502 error gateway,and following error in error log: 2011/11/28 18:49:51 [error] 5376#0: *6 upstream sent unexpected FastCGI record: 3 while reading response header from upstream, client: ipadress, server: ipadress, request: "GET /default.aspx HTTP/1.1", upstream: "fastcgi://127.0.0.1:9999", host: "ipadress" I tried different things to change but always same result,except maybe sometime in error log is number 1 or 3 instead 6.Nginx ver is 1.03 64 bit,mono and xsp latest versions. Any idea what could be wrong?

    Read the article

  • Fatal error 9001 on shared SQL Server 2008

    - by user643192
    I've asked this same question on StackOverflow, but I might actually have a better chance for an answer here so am posting here as well. I know this question has been asked here before, but none of the suggestions have worked for me. I have an ASP.NET MVC (v. 3) website on a shared server. The website was working fine for a few weeks now, until I started getting a Fatal Error 9001 error straight after login. Because this is a shared server, there are only very limited things I can do with the database (and I don't know that much about databases anyway). The help desk insist that there is nothing wrong with their server. I got various suggestions from them: Upgrading to the business plan because I am out of space (first suggestion) Even though the .mdb file is small, the .ldb can grow very quickly. The .ldb file is probably taking up all the space. I have 100MB available, the database size is 16.5MB. Can the .ldb file take up the remaining space? On querying this with the helpdesk, they admitted that my entire db is only 25MB. There is something wrong with my SQL queries and I should check the website. I'm using EF with linq to SQL. Everything was working fine until now... Can there be something that goes wrong in the queries that causes this sort of error? There is nothing wrong to be seen in the db logs, so this error cannot possibly have happened. I should log it next time it happens and contact again. I found some posts suggesting that restoring a DB backup can get rid of the issue. I do not have a recent backup, and can't take a new one because of a fatal error 9001 occurring. Since this is a shared server I have about 0 authority to execute anything against the DB (think CHECKDB, truncating the log, etc.). So I am at my wits end pretty much. What else can I do/try to get my website moving again?

    Read the article

  • Changes made to cli's php.ini not taking effect

    - by Sandeepan Nath
    I have two php.ini files - /etc/php.ini which loads in case of cli /opt/lampp/etc/php.ini which loads in case of browser. I am able to use PHP's Mailparse extension after adding the line extension=mailparse.so in the /opt/lampp/etc/php.ini and restarting lampp. But I am not able to load the same in case of command line - getting PHP Fatal error: Call to undefined function mailparse_msg_create() in ... mailparse_msg_create() is a part of the Mailparse extension. I tried by relogging with the user after making the change and even restarting the system. What needs to be done so that the change takes effect. Update I checked that php -i | grep 'Configuration File' gives PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/mailparse.so' - /usr/lib/php/modules/mailparse.so: cannot open shared object file: No such file or directory in Unknown on line 0 Configuration File (php.ini) Path => /etc Loaded Configuration File => /etc/php.ini Update 2 I copied the mailparse.so from /opt/lampp/lib/php/extensions/no-debug-non-zts-20090626 and put it in /usr/lib/php/modules. I added extension=mailparse.so to /etc/php.ini as well. But it still showed this warning PHP Warning: PHP Startup: Unable to load dynamic library ... As told by Lekensteyn, I did ldd /usr/lib/php/modules/mailparse.so and got ldd: warning: you do not have execution permission for /usr/lib/php/modules/mailparse.so' So I gave execute permission. Then ldd /usr/lib/php/modules/mailparse.so showed linux-gate.so.1 => (0x00110000) libc.so.6 => /lib/libc.so.6 (0x0011d000) /lib/ld-linux.so.2 (0x003aa000) which looks normal. BUt now, running php command says PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/mailparse.so' - /usr/lib/php/modules/mailparse.so: undefined symbol: mbfl_name2no_encoding in Unknown on line 0

    Read the article

  • How to manage sub-domains on WinHost with IIS7 URL Rewrite 2.0?

    - by jrummell
    I'm trying out WinHost and I'm running into some issues with sub-domains. On WinHost, you can have multiple sub-domains per hosting account, but each sub-domain points to the root website. E.g. you can have www.example.com, sub1.example.com, and sub2.example.com but all of them display the content at http://www.example.com/. Other Hosts allow you to point sub-domains to a sub folder in your website. This would allow you to point sub1.example.com to /sub1, sub2.example.com to /sub2 and www.example.com to /. WinHost recommends using an asp/aspx page to redirect http://sub1.example.com to http://sub1.example.com/sub1, which points to /sub1. While that would work, I'd like to not have the subdomain in the url twice. So I tried using IIS7 URL Rewrite to point http://sub1.example.com to /sub1. Ben Powell describes this in detail on his blog. This is great, except Request.ApplicationPath is now /sub1/path/to/current/page.aspx, which breaks ASP.Net Themes (and probably other stuff too). What can I do to fix the ApplicationPath? Is there a better way to accomplish this?

    Read the article

  • which performance counters mainly matter for windows server performance?

    - by Karl Cassar
    We have a website which is sometimes performing slowly, and / or completely hangs. I have setted up temporarily the default system performance data collector in Performance Monitor, to see if this can shed some light. However, the default Data Collector set collects a huge amount of counters, as well as generates huge logs files. Just 8 hours of data resulted in 4GB of data. Which performance counters matter the most, when judging server load? Also, is it a performance concern if one leaves such data-collectors running indefinitely? Obviously, I will not know when the server will experience slow performance, so I need the logs there so that I can check them out. Any other specific guidelines on monitoring server performance would be greatly appreciated. OS is a Windows Server 2008 R2 (Web Edition).

    Read the article

  • Router for creating site to site VPN to server provider using Cisco ASA 5540

    - by fondie
    We have dedicated servers hosted for us by a third party, we connect to these over a VPN. My server provider uses Cisco ASA 5540 as VPN devices. Currently we're using software clients on individual machines to connect to this VPN, either: Cisco VPN Client Shrew Soft VPN Connect However, I'm looking to purchase a new load balancing router for our office and thought this could be an opportunity to get VPN client duties taken over by hardware. We could then create a permanent VPN tunnel that could be used by anyone on the network with no software client necessary. Sadly I'm not the most knowledgeable on this kind of stuff so is: 1) This a realizable goal? Next I need to know what kind of hardware I will need. I'm not looking to spend lots of money on this (~$500), so doubtful I can afford any Cisco kit. Therefore, this is the most promising candidate I've seen (as far as my limited knowledge goes): Draytek Vigor 2955 - http://www.draytek.co.uk/products/vigor2955.html 2) Would this be compatible with the Cisco kit my server provider uses? 3) If not, are there any alternatives I should consider? Many thanks in advance.

    Read the article

  • How to set up spf records to send mail from google hosted apps to gmail addresses

    - by Chris Adams
    Hi there, I'm trying to work out why email I send from one domain I own is rejected by another that I own, and while I think it may be related to how I've setup spf records, I'm not sure what steps I need to take to fix it. Here's the error message I receive: Technical details of permanent failure: Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 550 550-Verification failed for <[email protected]> 550-No Such User Here 550 Sender verify failed (state 14). Here's the response from [email protected] Delivered-To: [email protected] Received: by 10.86.92.9 with SMTP id p9cs85371fgb; Wed, 2 Sep 2009 22:33:32 -0700 (PDT) Received: by 10.90.205.4 with SMTP id c4mr2406190agg.29.1251956007562; Wed, 02 Sep 2009 22:33:27 -0700 (PDT) Return-Path: <[email protected]> Received: from verifier.port25.com (207-36-201-235.ptr.primarydns.com [207.36.201.235]) by mx.google.com with ESMTP id 26si831174aga.24.2009.09.02.22.33.25; Wed, 02 Sep 2009 22:33:26 -0700 (PDT) Received-SPF: pass (google.com: domain of [email protected] designates 207.36.201.235 as permitted sender) client-ip=207.36.201.235; Authentication-Results: mx.google.com; spf=pass (google.com: domain of [email protected] designates 207.36.201.235 as permitted sender) [email protected]; dkim=pass [email protected] DKIM-Signature: v=1; a=rsa-sha1; c=relaxed/relaxed; s=auth; d=port25.com; h=Date:From:To:Subject:Message-Id:In-Reply-To; [email protected]; bh=GRMrcnoucTl4upzqJYTG5sOZMLU=; b=uk6TjADEyZVRkceQGjH94ZzfVeRTsiZPzbXuhlqDt1m+kh1zmdUEoiTOzd89ryCHMbVcnG1JajBj 5vOMKYtA3g== DomainKey-Signature: a=rsa-sha1; c=nofws; q=dns; s=auth; d=port25.com; b=NqKCPK00Xt49lbeO009xy4ZRgMGpghvcgfhjNy7+qI89XKTzi6IUW0hYqCQyHkd2p5a1Zjez2ZMC l0u9CpZD3Q==; Received: from verifier.port25.com (127.0.0.1) by verifier.port25.com (PowerMTA(TM) v3.6a1) id hjt9pq0hse8u for <[email protected]>; Thu, 3 Sep 2009 01:26:52 -0400 (envelope-from <[email protected]>) Date: Thu, 3 Sep 2009 01:26:52 -0400 From: [email protected] To: [email protected] Subject: Authentication Report Message-Id: <[email protected]> Precedence: junk (auto_reply) In-Reply-To: <[email protected]> This message is an automatic response from Port25's authentication verifier service at verifier.port25.com. The service allows email senders to perform a simple check of various sender authentication mechanisms. It is provided free of charge, in the hope that it is useful to the email community. While it is not officially supported, we welcome any feedback you may have at <[email protected]>. Thank you for using the verifier, The Port25 Solutions, Inc. team ========================================================== Summary of Results ========================================================== SPF check: pass DomainKeys check: neutral DKIM check: neutral Sender-ID check: pass SpamAssassin check: ham ========================================================== Details: ========================================================== HELO hostname: fg-out-1718.google.com Source IP: 72.14.220.158 mail-from: [email protected] ---------------------------------------------------------- SPF check details: ---------------------------------------------------------- Result: pass ID(s) verified: [email protected] DNS record(s): stemcel.co.uk. 14400 IN TXT "v=spf1 include:aspmx.googlemail.com ~all" aspmx.googlemail.com. 7200 IN TXT "v=spf1 redirect=_spf.google.com" _spf.google.com. 300 IN TXT "v=spf1 ip4:216.239.32.0/19 ip4:64.233.160.0/19 ip4:66.249.80.0/20 ip4:72.14.192.0/18 ip4:209.85.128.0/17 ip4:66.102.0.0/20 ip4:74.125.0.0/16 ip4:64.18.0.0/20 ip4:207.126.144.0/20 ?all" ---------------------------------------------------------- DomainKeys check details: ---------------------------------------------------------- Result: neutral (message not signed) ID(s) verified: [email protected] DNS record(s): ---------------------------------------------------------- DKIM check details: ---------------------------------------------------------- Result: neutral (message not signed) ID(s) verified: NOTE: DKIM checking has been performed based on the latest DKIM specs (RFC 4871 or draft-ietf-dkim-base-10) and verification may fail for older versions. If you are using Port25's PowerMTA, you need to use version 3.2r11 or later to get a compatible version of DKIM. ---------------------------------------------------------- Sender-ID check details: ---------------------------------------------------------- Result: pass ID(s) verified: [email protected] DNS record(s): stemcel.co.uk. 14400 IN TXT "v=spf1 include:aspmx.googlemail.com ~all" aspmx.googlemail.com. 7200 IN TXT "v=spf1 redirect=_spf.google.com" _spf.google.com. 300 IN TXT "v=spf1 ip4:216.239.32.0/19 ip4:64.233.160.0/19 ip4:66.249.80.0/20 ip4:72.14.192.0/18 ip4:209.85.128.0/17 ip4:66.102.0.0/20 ip4:74.125.0.0/16 ip4:64.18.0.0/20 ip4:207.126.144.0/20 ?all" ---------------------------------------------------------- SpamAssassin check details: ---------------------------------------------------------- SpamAssassin v3.2.5 (2008-06-10) Result: ham (-2.6 points, 5.0 required) pts rule name description ---- ---------------------- -------------------------------------------------- -0.0 SPF_PASS SPF: sender matches SPF record -2.6 BAYES_00 BODY: Bayesian spam probability is 0 to 1% [score: 0.0000] 0.0 HTML_MESSAGE BODY: HTML included in message I've registered the spf records for my domain, as advised here Both domains pass validate according to Kitterman's spf record testing tools, so I'm somewhat confused about this. I also have the catchall address set up on the stemcel.co.uk domain here, but I don't have one setup for chrisadams.me.uk. Instead, we have the following forwarders setup [email protected] to [email protected] [email protected] to [email protected] [email protected] to [email protected] [email protected] to [email protected] Any ideas how to get this working? I'm not sure what I should be looking for here.

    Read the article

  • Hyper-V + RRAS NAT + Port Forwarding + RDP, can I get it all working together?

    - by Tom Bull
    I am running a Windows 2008 R2 server with various services running natively and two virtualised servers running on Hyper-V. The hardware server, I'm going to call it REAL1, has one external NIC, to which I can assign any of the following IP addresses: 1.2.3.4, 1.2.3.5, 1.2.3.6, etc... I need to achieve the following: I would like to be able to connect to REAL1 via remote desktop (RDP / port 3389) on one IP address (say 1.2.3.4), but also to the virtualised servers (I'm going to call them VIRTUAL1 and VIRTUAL2) on the other available IP addresses (say 1.2.3.5 and 1.2.3.6). The easiest way of doing this is to connect the virtual servers directly to the external interface and assign them each their own IP address. REAL1 will have 1.2.3.4, VIRTUAL1 will have 1.2.3.5 and VIRTUAL2 will have 1.2.3.6. Unfortunately, although I don't directly manage the two virtual servers, I have responsibility for their security. I would like to have some kind of firewall between the virtual servers an the internet. I have tried running a virtual machine firewall, but have found the performance on Hyper-V pretty terrible. The alternative I am now trying is Routing and Remote Access (RRAS): I have set up a virtual network called 'Internal' and REAL1 has a virtual network adapter connected to this virtual network I have connected each of the virtual servers to this network too I have assigned each server static IP addresses on this virtual network (REAL1 has 10.1.1.1, VIRTUAL1 has 10.1.1.2 and VIRTUAL2 has 10.1.1.3) I have installed RRAS and set up a NAT. The external interface is the external NIC, the internal interface is the virtual NIC connected to the internal network I have assigned all the available external IP addresses to the external NIC on REAL1. The virtual servers have been set up appropriately such that their default gateway is pointing to 10.1.1.1 and they can both access externally. Success! The RRAS is routing packets. The problem I have is that when I try to port forward services from the external IP address on REAL1, it only works if there is not already a service bound to the port. Remote desktop 'greedily' binds to every available IP address on port 3389 on REAL1 so I can't selectively forward incoming traffic for 1.2.3.5:3389 to 10.1.1.2:3389. RRAS will allow me to set up this port forwarding, and no errors come up. It just doesn't work. So the question I have is: Is there a better way of doing this? Or at least is there a way of resolving the apparant conflict between RRAS and everything else on the physical server?

    Read the article

  • SUSE EC2 Problem - zypper - Permission denied

    - by phuu
    I'm trying to use zypper to install gcc on my Amazon EC2 instance running SUSE.When I try:zypper in gcc I get: Retrieving repository 'SLE11-SDK-SP1' metadata [] Permission to access 'http://eu-west-1-ec2-update.susecloud.net/repo/install/SLE11-SDK-SP1/sle-11-i586/media.1/media' denied. Abort, retry, ignore? [a/r/i/?] (a): i Retrieving repository 'SLE11-SDK-SP1' metadata [error] Repository 'SLE11-SDK-SP1' is invalid. Can't provide /media.1/media : User-requested skipping of a file Please check if the URIs defined for this repository are pointing to a valid repository. Warning: Disabling repository 'SLE11-SDK-SP1' because of the above error. Retrieving repository 'SLE11-SDK-SP1-Updates' metadata [|] Permission to access 'http://eu-west-1-ec2-update.susecloud.net/repo/update/SLE11-SDK-SP1-Updates/sle-11-i586/repodata/repomd.xml' denied. Abort, retry, ignore? [a/r/i/?] (a): i Retrieving repository 'SLE11-SDK-SP1-Updates' metadata [error] Repository 'SLE11-SDK-SP1-Updates' is invalid. Can't provide /repodata/repomd.xml : User-requested skipping of a file Please check if the URIs defined for this repository are pointing to a valid repository. Warning: Disabling repository 'SLE11-SDK-SP1-Updates' because of the above error. Retrieving repository 'SLES11-Extras' metadata [/] Permission to access 'http://eu-west-1-ec2-update.susecloud.net/repo/update/SLES11-Extras/sle-11-i586/repodata/repomd.xml' denied. Abort, retry, ignore? [a/r/i/?] (a): r Permission to access 'http://eu-west-1-ec2-update.susecloud.net/repo/update/SLES11-Extras/sle-11-i586/repodata/repomd.xml' denied. Abort, retry, ignore? [a/r/i/?] (a): zypper in gcc Invalid answer 'zypper in gcc'. [a/r/i/?] (a): a Retrieving repository 'SLES11-Extras' metadata [error] Repository 'SLES11-Extras' is invalid. Can't provide /repodata/repomd.xml : Please check if the URIs defined for this repository are pointing to a valid repository. Warning: Disabling repository 'SLES11-Extras' because of the above error. Retrieving repository 'SLES11-SP1' metadata [-] Permission to access 'http://eu-west-1-ec2-update.susecloud.net/repo/install/SLES11-SP1/sle-11-i586/media.1/media' denied. Abort, retry, ignore? [a/r/i/?] (a): a Retrieving repository 'SLES11-SP1' metadata [error] Repository 'SLES11-SP1' is invalid. Can't provide /media.1/media : Please check if the URIs defined for this repository are pointing to a valid repository. Warning: Disabling repository 'SLES11-SP1' because of the above error. Retrieving repository 'SLES11-SP1-Updates' metadata [] Permission to access 'http://eu-west-1-ec2-update.susecloud.net/repo/update/SLES11-SP1-Updates/sle-11-i586/repodata/repomd.xml' denied. I've search for the problem and this thread came up, but offered no solutions.I've triedsces-activate. Am I doing something wrong? I should say I'm very new to this, and I admit I don't really know what I'm doing, but I'm trying to learn about setting up and running a server and so I thought I'd throw myself in at the deep(ish) end. Thanks for reading.

    Read the article

  • Can't install Perl DBD module on Ubuntu (for Bugzilla)

    - by Mara
    Trying to install bugzilla-4.2.2 on Ubuntu 12.04. When I run checksetup.pl I get the following error: YOU MUST RUN ONE OF THE FOLLOWING COMMANDS (depending on which database you use): PostgreSQL: /usr/bin/perl install-module.pl DBD::Pg MySQL: /usr/bin/perl install-module.pl DBD::mysql SQLite: /usr/bin/perl install-module.pl DBD::SQLite Oracle: /usr/bin/perl install-module.pl DBD::Oracle To attempt an automatic install of every required and optional module with one command, do: /usr/bin/perl install-module.pl --all I have installed MySQL via XAMPP so I run: /urs/bin/perl install-module.pl DBD::mysql And get the following error: perl Makefile.PL --testuser=username Can't exec "mysql_config": No such file or directory at Makefile.PL line 479. Can't find mysql_config. Use --mysql_config option to specify where mysql_config is located Can't exec "mysql_config": No such file or directory at Makefile.PL line 479. Can't find mysql_config. Use --mysql_config option to specify where mysql_config is located Can't exec "mysql_config": No such file or directory at Makefile.PL line 479. Can't find mysql_config. Use --mysql_config option to specify where mysql_config is located Failed to determine directory of mysql.h. Use perl Makefile.PL --cflags=-I<dir> to set this directory. For details see the INSTALL.html file, section "C Compiler flags" or type perl Makefile.PL --help Warning: No success on command[/usr/bin/perl Makefile.PL LIB="/opt/lampp/htdocs/bugzilla/4.2.2/bugzilla-4.2.2/lib" INSTALLMAN1DIR="/opt/lampp/htdocs/bugzilla/4.2.2/bugzilla-4.2.2/lib/man/man1" INSTALLMAN3DIR="/opt/lampp/htdocs/bugzilla/4.2.2/bugzilla-4.2.2/lib/man/man3" INSTALLBIN="/opt/lampp/htdocs/bugzilla/4.2.2/bugzilla-4.2.2/lib/bin" INSTALLSCRIPT="/opt/lampp/htdocs/bugzilla/4.2.2/bugzilla-4.2.2/lib/bin" INSTALLDIRS=perl] CAPTTOFU/DBD-mysql-4.021.tar.gz /usr/bin/perl Makefile.PL LIB="/opt/lampp/htdocs/bugzilla/4.2.2/bugzilla-4.2.2/lib" INSTALLMAN1DIR="/opt/lampp/htdocs/bugzilla/4.2.2/bugzilla-4.2.2/lib/man/man1" INSTALLMAN3DIR="/opt/lampp/htdocs/bugzilla/4.2.2/bugzilla-4.2.2/lib/man/man3" INSTALLBIN="/opt/lampp/htdocs/bugzilla/4.2.2/bugzilla-4.2.2/lib/bin" INSTALLSCRIPT="/opt/lampp/htdocs/bugzilla/4.2.2/bugzilla-4.2.2/lib/bin" INSTALLDIRS=perl -- NOT OK Skipping test because of notest pragma Running make install Make had some problems, won't install Could not read metadata file. Falling back to other methods to determine prerequisites So then I tried checksetup.pl's suggestion and ran: /usr/bin/perl install-module.pl --all And it seems to have installed DBD::SQLite without any problems, but again I see a warning that says it's skipping tests because of notest pragma. When I re-run checksetup.pl It shows 3 of the 4 original DB drivers in the "not found" list: PostgreSQL: /usr/bin/perl install-module.pl DBD::Pg MySQL: /usr/bin/perl install-module.pl DBD::mysql Oracle: /usr/bin/perl install-module.pl DBD::Oracle So running it with --all seems to have installed the SQLite driver without any problems, but for some reason I can't seem to install the MySQL driver. Again I need MySQL because thats what XAMPP uses and because I prefer MySQL regardless. I have a feeling it has something to do with this notest pragma error. Any ideas? Thanks in advance!

    Read the article

< Previous Page | 69 70 71 72 73 74 75 76 77 78 79 80  | Next Page >