Search Results

Search found 7154 results on 287 pages for 'networking'.

Page 73/287 | < Previous Page | 69 70 71 72 73 74 75 76 77 78 79 80  | Next Page >

  • Keep getting invalid IP via WiFi

    - by nmuntz
    There is something wrong with my WiFi. I keep getting an invalid IP via DHCP (169.254.x.x), this happens for ALL wifi connections (home, office, etc). If I try a Local Ethernet connection via cable it works fine. I have tried downloading the latest drivers for my wireless adapter, resetting the TCP Stack and still have this issue. One strange thing I notice is under Device Manager, Network Adapters I have 4 "Unknown Devices" and three "Remote NDIS based Internet Sharing Device". My guess is that this belongs to McAfee. Not sure if this is related or not, anyways to try to fix this I tried downloading the NetLUIDfix.exe utility from McAfee but it didn't work. Any ideas how to solve this annoying issue? Thanks!!

    Read the article

  • DHCP settings out of range Internet shuts off after a few minutes

    - by user263115
    I recently upgraded from windows eight to windows 8.1 I do not know if this has anything to do with anything I have a 64 bit OS. My Internet goes off by itself every 5 minutes even though my wireless icon at the lower right of the screen still shows connected I had an error message in the last event in it said that might DHCP settings were out of range. I get my internet at my house through a wireless portable hotspot through my smart phone. But i haven't ever had any problems before and i only have this problem on this network. If i turn airplane mode on and reset my network card, the internet will come back to life but soon die. i don't experience this problem while on a different network or if i'm on WiFi. This s really annoying please help Windows IP Configuration Host Name . . . . . . . . . . . . : NastyMcnastyJr Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter Local Area Connection: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : TeamViewer VPN Adapter Physical Address. . . . . . . . . : 00-FF-5D-13-26-21 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Wireless LAN adapter Local Area Connection* 11: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Wi-Fi Direct Virtual Adapter Physical Address. . . . . . . . . : F6-B7-E2-50-09-38 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Wireless LAN adapter SAMMY McNASTY: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom 802.11n Network Adapter Physical Address. . . . . . . . . : F4-B7-E2-50-09-38 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::3107:66bc:cf1f:c776%4(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.43.3(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : Friday, November 1, 2013 9:50:20 PM Lease Expires . . . . . . . . . . : Saturday, November 2, 2013 12:56:46 AM Default Gateway . . . . . . . . . : 192.168.43.1 DHCP Server . . . . . . . . . . . : 192.168.43.1 DHCPv6 IAID . . . . . . . . . . . : 83146722 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-F1-98-B4-20-89-84-84-61-BB DNS Servers . . . . . . . . . . . : 192.168.43.1 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter Ethernet: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom NetLink (TM) Gigabit Ethernet Physical Address. . . . . . . . . : 20-89-84-84-61-BB DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Log Name: System Source: Microsoft-Windows-UserPnp Date: 10/26/2013 7:52:23 PM Event ID: 20003 Task Category: (7005) Level: Information Keywords: User: SYSTEM Computer: NastyMcnastyJr Description: Driver Management has concluded the process to add Service vwifibus for Device Instance ID PCI\VEN_14E4&DEV_4727&SUBSYS_E042105B&REV_01\4&3265ADAB&0&00E1 with the following status: 0. Event Xml: 20003 0 4 7005 0 0x8000000000000000 5118 System NastyMcnastyJr vwifibus \SystemRoot\system32\DRIVERS\vwifibus.sys PCI\VEN_14E4&DEV_4727&SUBSYS_E042105B&REV_01\4&3265ADAB&0&00E1 false true 0 Log Name: System Source: Microsoft-Windows-UserPnp Date: 10/19/2013 3:29:12 PM Event ID: 20001 Task Category: (7005) Level: Information Keywords: User: SYSTEM Computer: NastyMcnastyJr Description: Driver Management concluded the process to install driver netbc64.inf_amd64_0df63b5297d0f820\netbc64.inf for Device Instance ID PCI\VEN_14E4&DEV_4727&SUBSYS_E042105B&REV_01\4&3265ADAB&0&00E1 with the following status: 0x0. Event Xml: 20001 0 4 7005 0 0x8000000000000000 2015 System NastyMcnastyJr netbc64.inf_amd64_0df63b5297d0f820\netbc64.inf 6.30.223.102 Microsoft PCI\VEN_14E4&DEV_4727&SUBSYS_E042105B&REV_01\4&3265ADAB&0&00E1 {4D36E972-E325-11CE-BFC1-08002BE10318} false false false 0x0 Broadcom 802.11n Network Adapter Log Name: System Source: Microsoft-Windows-DNS-Client Date: 11/2/2013 12:24:59 AM Event ID: 1014 Task Category: (1014) Level: Warning Keywords: (268435456) User: NETWORK SERVICE Computer: NastyMcnastyJr Description: Name resolution for the name www.google.com timed out after none of the configured DNS servers responded. Event Xml: 1014 0 3 1014 0 0x4000000010000000 34771 System NastyMcnastyJr www.google.com 128 02000000C0A82B01000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000

    Read the article

  • Exchange 2003: Fresh install, couple noob questions.

    - by Eli
    Hi All, Thanks for reading! I have a small network set up for a local office here, and have a fresh install of Exchange 2003 on our sole-server PDC. The network uses one domain, call it ourdomain.net, which is DNSed locally, but not DNSed for the actual domain, so ourdomain.net works from within the network, but from outside, it's just pointed to some domain parking. I have a completely different domain, call it emaildomain.com, which is currently setup for our website and email, which is hosted with a standard hosting company. We've been using a combination of Thunderbird and Outlook (with local .pst files) for email. I've been asked to setup Exchange to work with our email, but am not familiar with it. The install seems to have gone just fine. The question is: How do I get email from a domain outside our network to work with the exchange server? Do I need to move the email for that domain to point to our local server (I so hope not!), or can I just set exchange so somehow slurp mail from the existing mailboxes on our host for that domain's mail? Or are there better ideas I don't know to ask for? Any help very appreciated - thanks!

    Read the article

  • Robocopy permission denied

    - by Edoode
    Robocopy is preinstalled with Windows 7. I've used it many times in the past. I tried to copy a folder to a remote share with robocopy c:\source "\\server\share\path" /s /r:2 /w:2` As a result I get permission denied. Using explorer I can copy files to this share. I've opened a command prompt with administrator permissions with the same result. The share is read/write for public. [EDIT] I've successfully mapped a driveletter to the share, but robocopy still fails EDIT I've added the /B switch without success. The exact error is: 2009/09/26 20:43:14 ERROR 5 (0x00000005) Accessing Destination Directory \drobo \Drobo\fotos__NEW\Ericsson\

    Read the article

  • Arch Linux drops me on my school network.

    - by Kravlin
    I'm running a Lenovo X61 which i carry around my college for getting on the internet at various points in the day. The network has always been finicky but recently it's gotten worse. I'll connect using iwconfig, get an ip from dhcpcd and log in using vpnc to their system. Sometimes I'll stay connected for hours but most of the time within 30 seconds my network traffic will drop to zero and i'll be unable to do anything. My computer still belives it's connected, however to try again i need to put my wireless interface down, put it back up and try again. It's gotten so bad that i've got a window on my computer pinging yahoo or google constantly in order to know if i'm still able to get online. I know other people who have used Arch Linux that don't have the same problems as well as people who use Ubuntu who haven't had any problems either. It seems like my computer is a special case. Does anyone have any suggestions on how to fix it? dmesg doesn't show anything out of the ordinary going on and i don't know where else to look for errors or other things to try.

    Read the article

  • Anti-DDoS Question

    - by Andre
    Our company´s main owner (telecon group) wants us to deploy anti-DDoS mechanisms, such as Arbor Pravail, which is a great idea. Although... I have a question... If our main ISP Backbone provider have no anti-DDoS mechanism, means that there is no point we get the Arbor Pravail? An DDoS attack can make damage uniquely the destination IP or to the whole network that the DDoS packets go through? Regards,

    Read the article

  • dynamic routing between openvpn tunnels

    - by pQd
    i'm thinking about using dynamic routing [ OSPF or RIP ] via OpenVPN tunnels. right now i have few offices connected in full mesh, but this is not scalable solution as we add more locations. i would like to avoid situation when plenty of internal traffic is affected if one of two vpn termination points that i plan to use is down. do you have similar configuration working in production? if so - what routing daemon did you use - quagga? something else? did you encounter any problems? thanks!

    Read the article

  • Ethernet switch capacity question

    - by Andrew Queisser
    We're looking at hooking up 48 small embedded systems with 10/100 Ethernet ports to an Ethernet switch and then have that switch talk to a server upstream via a faster connection. I have a couple of questions about that scenario: What kind of upstream connection is best (fiber, other?) Would it be reasonable to download 1GB/hour from each of the 48 systems concurrently? We'd be using some kind of TCP based protocol of our own design. Thanks, Andrew

    Read the article

  • Finding cause of TCP retransmission within a LAN

    - by Surreal
    Hello denizens of Server Fault I have an irritating problem with a LAN of about 100 computers, 2 Windows domain servers, and 12 VoIP phones. Since their installation around a year ago, every week or so, we notice a VoIP phone resetting itself - occasionally in the middle of a call. Simultaneously there are often signs of temporary loss of connection on computers: freezes in explorer while accessing network shares, errors in our administration software due to loss of connection to the database server. I have been doing some Wireshark monitoring on the connection between the VoIP PBX and the rest of the network. Wireshark picks up a clump of retransmitted TCP packets at the times when we record phone restarts. The Wireshark log shows about 2 clusters of retransmissions a day ranging from 5 packets to hundreds. Those in each cluster are mainly between the PBX and some set of the VoIP phones, but not always the same set. Often retransmissions at the same time are to phones connected to the same switch, but sometimes retransmissions occur together to phones at opposite ends of the network. There are usually some coincident retransmissions in passing TCP traffic, for example between client machines and the file servers. The spikes in retransmissions and phone resets do not correlate well with when the network is heavily loaded. They seem to occur slightly more during the day, but most in the evening, when traffic should be decreasing. They occur reasonably often late at night when most computers are turned off and traffic should be lowest. Do you have any ideas that might help diagnose the cause of problems like this? One thing I have not yet tried, but should have, is updating the firmware of all the switches.

    Read the article

  • How to get rid of auto-generated sequence number in network's device name in Windows?

    - by Piotr Dobrogost
    Every time one plugs in the same usb wireless adapter in a new usb port, Windows creates new network device with auto-generated sequence number which looks like this Wireless-N USB Network Adapter #2, Wireless-N USB Network Adapter #3, ... The name of a device is being displayed as part of network's information in Control Panel|Network Connections. How can I get rid of this sequence number? I found out device name which is displayed in network's information is kept in the FriendlyName REG_SZ value under HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Enum\USB\VID_[device specific string]\[usb port specific string] However when I try to modify this value I get error Cannot edit FriendlyName: Error writing the value's new contents. I tried to delete extra keys under HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Enum\USB\VID_13B1&PID_0029 but got Cannot delete KEY NAME: Error while deleting key. error. Trying to solve this problem I followed this answer but trying to change owner with Replace owner on subcontainers and objects option checked I got this error - Registry Editor could not set owner on the currently selected, or some of its subkeys. To find out which subkey is the source of problem I tried changing owner of each subkey. After successfully changing owner of Properites subkey I saw it has subkeys which were previously hidden. Now trying to change owner of these subkeys looks like this: Any idea how to delete these keys?

    Read the article

  • Can connect through Watchguard mobile VPN, but can't ping or access network drives

    - by johnnyb10
    We're having any issue in which some of our employess can no longer connect to our network drives when out of the office. We use Watchguard Mobile VPN (we have a Watchguard Firebox firewall) and the users are able to connect. That is, their status in the the VPN client says "Connected" and they have the correct IP address listed as the VPN Endpoint. The problem is, when they try to map drives, or even ping the IP address of a server on our network, it fails. Last week, we temporarily switched one of our Comcast modems to our backup DSL modem because the Comcast was accidentally shut off by Comcast, and the problem seemed to start around then. We've since switched back and the problem persists, so that doesn't seem to have been it (which makes sense). But we also made other changes at the time that might have thrown something off, although we feel like we've checked them all. Plus, some people can successfully connect to network drives through the VPN. Can someone please suggest some steps to help troubleshoot? We've checked the policies on our Watchguard box, and they seem fine. We've looked at the settings on the Mobile VPN client, but nothing seems like a probable cause. Thanks.

    Read the article

  • No network upsets gnome

    - by Darren Cook
    An issue that has been bothering me for over a year now. My notebook, running ubuntu 10.04, is almost all the time using a wired connection, with static IP address. And a remote DNS server. Network is configured with entries in /etc/network/interfaces and /etc/resolv.conf, rather than whatever the gnome UI tool was (*) But if I'm out, or simply unplug the network cable, a few things get weird. Specifically the gnome-panel stops working - it is still there, but isn't updating. And opening a nautilus window (e.g. to look at files on the local disk) has huge time-outs. By that I mean it will not open the window for something like 30 or 60 seconds; but when it does finally open it I can see the files and it is perfectly usable. Everything else works fine, alt-tab between windows, etc. I use the commandline to find the pid of gnome-panel, kill it, wait a couple of seconds, and it opens up a fresh panel which is normally usable. (Something like 10 minutes later it will have locked/crashed again; the same for the nautilus windows.) I'm guessing this is a DNS issue? Would setting up a local DNS server help? Guess number 2 was related to having a file server mount (samba, though running on another linux box), and symbolic links to files and directories on that file server on my desktop. My question is a bit vague... Does anyone recognize these symptoms, and have a suggestion? Or do you have some troubleshooting suggestions for narrowing down the problem? My /etc/hosts: 127.0.0.1 localhost 127.0.1.1 myhost # The following lines are desirable for IPv6 capable hosts ::1 localhost ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters ff02::3 ip6-allhosts 127.0.0.1 testsite.local #Other test website URLs here UPDATE: Some timings to open some desktop folder icons. This is after pulling out the network cable. A sub-directory of the desktop took 23 secs to open up. Content appears immediately (just 8 files, it has no further subdirectories). The home directory icon took 12 seconds to open up, but then took about 30 seconds for the files to appear. I closed it and tried again. This time it took 18 seconds to open up, but then 70 seconds before anything appeared. *: I couldn't work out how to use the gnome network tool for my needs, which include 3-4 static IPs for testing virtual hosts locally.

    Read the article

  • Move sendmail from Fedora 1 to a different server ( fedora 12)

    - by tanieboy4u
    We have a sendmail server that also works as DHCP, DNS, and a gateway to our ISP. It has three network interfaces, one for our ISP ( static IP) and the other two is for LANS on different subnet. The hardware is quite old and we've been experiencing downtime due to hardware failures, so we have decided to upgrade the hardware and while at it upgrade the linux OS to Fedora 12. Were trying to do this with minimal downtime. We are planning to take these steps. Install New OS (Fedora 12) on the new server with 3 network interfaces. Install DHCP, BIND, Sendmail, SpamAssassin, MailScanner, Dovecot, Squirrelmail on the new server. Transfer settings from the old server to the new server. ( This is the hardest part that we know). For DHCP and DNS, we can just copy the dhcp leases and conf file and everything should work right? How do we go about moving the users/email accounts from the old server to the new one? Thanks for all your help!

    Read the article

  • Wifi as LAN - Is it possible ? How ?

    - by sagar
    Hello ! Every one. I am having a query regarding WiFi network. I am having PC & LapTop. Now, Let me explain the situation. I requested My WiFi providers that I want connection in my PC. So that - WiFi provider set up an Antenna on my building Terrace - They joined a cable to pc & that Antenna. ( I think using RJ45 connector ) - The reason behind this - my pc is not having inbuilt wifi functionality. Now - almost laptops have inbuilt functionality. Now - On terrace there is wifi with superb speed. But on my flat - wifi comes with low speed. so, when ever I use internet on my pc - it has great speed - but my laptop works with low speed. The reason behind this - PC is catching wifi from terrace & laptop is catching the wifi from it's own place. Now, My question is something like this. Can we place an antenna or something like that & connect it to laptop for better wifi speed? ( I am not technical person - Please add comment for down vote - if any ) ( Please add comment for more explanation of my Problem ) Thanks in advance for sharing your knowledge. Sagar

    Read the article

  • Disable STP in Opensolaris bridge

    - by quentin
    Hello, how can i completely disable STP in a Opensolaris bridge. This bridge is connected to a Cisco Access Port and will disable the uplink port when the first BPDU arrives. bridged[3651]: [ID 581644 daemon.warning] unexpected BPDU on rge1 from 0:xx:xx:xx:xx:b; forwarding disabled I already disabled the transmission of BPDU Messages to the Switch by: dladm set-linkprop -p stp=0 rge1 This solved only the problem that the access switch port goes in "error-disable" mode. Thomas

    Read the article

  • Intel Wireless 4965AGN not achieving N throughput when connected to an Airport Express N network

    - by BenA
    I have an Intel Wireless WiFi Link 4965AGN adaptor in my laptop (HP Pavillion dv2000 series) which is connecting to a 5Ghz-only 802.11n network provided by an Apple Airport Express. The network is using WPA2 encryption. My desktop is also connected the Airport, via a Linksys WUSB600N USB adaptor. Both are running with the latest drivers, and the Airport is running the latest firmware. The Airport is also configured to use wide channels. The problem I have is that I never get throughput above 4MB/s when transferring files between the two machines. Even a pessimistic calculation shows a 270Mbps network as being capable of transfer rates at well above 10MB/s. I'm pretty sure I've isolated the issue to being the Intel adaptor, as wiring the desktop to the AP, and using the Linksys adaptor on the laptop immediately yielded speeds limited by the 100MB/s ethernet connection. I know that 802.11n is still a draft standard, and so mixing kit from different manufacturers can easily lead to poor results, but I was just wondering if anybody else out there has had success with this Intel adaptor on an N network? Or even better, connecting it to an Airport Express? Can anybody give me any advice on how to troubleshoot this issue? I should also mention that the Airport Express doesn't allow you to manually specify channels when running in N mode, and that I've been able to rule out interference from other Wireless LANs by scanning. There aren't any other 5GHz networks in my area. All ideas welcome! Update: A while later, I've just updated to the most recent drivers for both the Intel chip in the laptop, and the USB adaptor. Unfortunately this hasn't improved things :(. If anybody has any advice it would be be gratefully received.

    Read the article

  • XP, how to apply security to files, now have simple file sharing and can't access some files from other machines ?

    - by Jules
    For a month or two now I've been using simple file sharing, for several months before that I didn't, then before that I had simple file sharing tuned on. So at the moment I don't have a security tab (on files or folders) or sharing permissions settings there too. As an example, from another machine, I can access files from 2007 but not from the summer of last year in the same folder. I can access all files on that local machine. So I think I just need to re-apply security or permissions somehow? What should I do?

    Read the article

  • Resetting TCP/IP Settings on Windows 8

    - by cpx
    Apparently, there's a command: netsh int ip reset which is known to reset TCP/IP settings for Windows XP/Vista/7 and I'm not sure how it works correctly on Windows 8. When I typed the command under command prompt (Admin) I got two errors as pointed out in the screenshot: Resetting , failed. Access is denied. At the end it said Resetting , OK! So, how do I confirm if it worked or not?

    Read the article

  • Mac OS X: How do I disable SSID Broadcasting with Internet Sharing over Airport?

    - by Jack Chu
    I'm currently using Internet Sharing from my Ethernet over Airport on my Macbook Pro, however I don't want my SSID broadcasted†. There doesn't seem to be an option in Sharing/System Preferences to hide my ssid or prevent broadcasting. Any ideas? † My parent's restaurant has a wifi router, but it's on the roof level where the cable was installed. The signal it gets is weak, but works for the macbook. Their iPhones and 802.11G based computers can't get the wifi connection, maybe 802.11N on the macbook gets better penetration. I figure they could use the airport sharing from the laptop. For a restaurant type setting I don't think having WPA or WPA2 is super important. There's nothing sensitive or insecure on the network, so I figure hiding the SSID would be good enough for their purposes. It's not even active 100% of the time.

    Read the article

  • Windows 7 file sharing password protecting or making stuff available to just me

    - by Carbonara
    Even with the new Homegroup feature I'm still finding the way Windows deals with folder sharing utterly baffling. Here's what I want to do. I have two computers, a PC Desktop and a laptop. I also live in a shared flat with other computer users. I have set up a Homegroup and a Workgroup on the desktop and joined them on the laptop and in the home group I have shared video, music and pictures. This is so that anyone on the network can view pictures and listen to music etc. But I want my Documents folder from my desktop to only be available to me on my laptop and not to anyone else that may be on the network. The Homegroup only allows (from what I can gather from the baffling array of options) sharing with everyone or no one. Is it possible to only allow the laptop to access the documents folder on the desktop? The user name and password are the same on both computers.

    Read the article

  • Ad-hoc connection between iPhone and Macbook Pro

    - by Phil Nash
    I sometimes find it useful to connect my iPhone to my Macbook Pro by creating an ad-hoc wireless network from the MBP and connecting to that from the iPhone. However, what I find is that sometimes this works and sometimes it doesn't. When it's not working the symptoms are usually that I see the ad-hoc SSID in the list of available networks on the iPhone, can connect to it from there (including entering my WEP key), and it shows up as the wifi network in use. However I don't get the wifi symbol in the taskbar (it remains as 3G) and attempting to use the connection (e.g. trying to connect to iTunes or Keynote using their respective Remote apps) fails saying that there is so wifi connection. I've tried rebooting both the iPhone and the MBP, recreating networks with different SSIDs and tried different channels - all to no avail! I'm especially puzzled that (a) sometimes it works just fine first time and (b) the Settings app seems to think its all connected fine. Is there anything else I should be trying?

    Read the article

  • Problems linking to social networks in Windows 8

    - by Andrew Cooper
    I've upgraded my laptop to Windows 8 (from Windows 7) and I'm having problems with getting information to show in the People and Messaging apps. I've linked my Facebook, Twitter and LinkedIn accounts to my Live Id, and on Windows 7 I was able to see my Friends' facebook activity in Windows Live Messenger. In the Windows 8 People app I can see all my contacts from Facebook, Twitter and LinkedIn, and I can see the on-line status of at least my Facebook contacts. I can also see the profiles details of each contact, but I don't get anything in the "What's New" view. The Messaging app is just blank. I assume I should be able to send messages to my contacts, but I can't see any way to do it. Am I missing something?

    Read the article

  • Wire VMWare Player NIC to a VLAN in Ubuntu 8.04.3

    - by Sophie Charlesworth
    I've got VMWare Player 2.5.x installed on a Ubuntu 8.04.3 host running CentOS 5.3 running Cobbler. VMWare Player has two NICs (I actually took this image from an ESXi image, converted it to Player 2.x image via VMWare Standalone Converter). I've also setup a vlan (vlan5) on the host with 10.0.0.x and I'd like Cobbler to use that VLAN to serve any incoming requests. How do I wire up my VMWare to use the VLAN I've setup? Just one of the NICs. What I'm trying to do is to offer a laptop with a VM that our sysadmins can go, plug it into a box (which does not connect to the interwebs) and install RHEL images via cobbler. So essentially, its a cross over cable from the network port on the lappy to the Dell server box. PXE boot in the dell box and install RHEL. I have the cobbler working fine under VMWare ESXi but not so on the VMWare Player because of the VLAN issue - I think. Any ideas?

    Read the article

  • Software to consolidate contacts from multiple sources?

    - by Neil
    I'm looking for an app that can take my contacts from Gmail, Facebook, and my mobile phone, to come up with one consolidated address book that, for each contact, contains the name, email address, facebook username, and mobile number, and if possible, export this data to the Mac Address Book. Is there any app that can do this? Online or offline will do. Currently, I've been only able to find apps that need to be hosted on my own server, such as the ones below. Isn't there any standalone desktop or web app? knowee[dot]net/ noserub[dot]com/ diso-project[dot]org/

    Read the article

  • Wire VMWare Player NIC to a VLAN in Ubuntu 8.04.3

    - by Sophie Charlesworth
    Hi, I've got VMWare Player 2.5.x installed on a Ubuntu 8.04.3 host running CentOS 5.3 running Cobbler. VMWare Player has two NICs (I actually took this image from an ESXi image, converted it to Player 2.x image via VMWare Standalone Converter). I've also setup a vlan (vlan5) on the host with 10.0.0.x and I'd like Cobbler to use that VLAN to serve any incoming requests. How do I wire up my VMWare to use the VLAN I've setup? Just one of the NICs. What I'm trying to do is to offer a laptop with a VM that our sysadmins can go, plug it into a box (which does not connect to the interwebs) and install RHEL images via cobbler. So essentially, its a cross over cable from the network port on the lappy to the Dell server box. PXE boot in the dell box and install RHEL. I have the cobbler working fine under VMWare ESXi but not so on the VMWare Player because of the VLAN issue - I think. Any ideas?

    Read the article

< Previous Page | 69 70 71 72 73 74 75 76 77 78 79 80  | Next Page >