Search Results

Search found 14985 results on 600 pages for 'port 25'.

Page 73/600 | < Previous Page | 69 70 71 72 73 74 75 76 77 78 79 80  | Next Page >

  • Is 0x9B (155decimal) a special control character? Why is it missing from ascii tables?

    - by Chris
    Hi, I'm working on an embedded system, and i'm having dramas getting it to send a certain chunk of data across the serial port. I narrowed it down and found that if a 0x9B is present in the message, it corrupts the message. So i then look up 0x9b (155) on http://www.asciitable.com/, and it's missing! Isn't that a bizarre coincidence! Any ideas, is this a special character or something?

    Read the article

  • What is wrong with this attempt of sending a break-signal?

    - by Jook
    I have quite a headache about this seemingly easy task: send a break signal to my device, like the wxTerm (or any similar Terminal application) does. This signal has to be 125ms long, according to my tests and the devices specification. It should result in a specific response, but what I get is a longer response than expected, and the transmitted date is false. e.g.: what it should respond 08 00 81 00 00 01 07 00 what it does respond 08 01 0A 0C 10 40 40 07 00 7F What really boggles me is, that after I have used wxTerm to look at my available com-ports (without connecting or sending anything), my code starts to work! I can send then as many breaks as I like, I get my response right from then on. I have to reset my PC in order to try it again. What the heck is going on here?! Here is my code for a reset through a break-signal: minicom_client(boost::asio::io_service& io_service, unsigned int baud, const string& device) : active_(true), io_service_(io_service), serialPort(io_service, device) { if (!serialPort.is_open()) { cerr << "Failed to open serial port\n"; return; } boost::asio::serial_port_base::flow_control FLOW( boost::asio::serial_port_base::flow_control::hardware ); boost::asio::serial_port_base::baud_rate baud_option(baud); serialPort.set_option(FLOW); serialPort.set_option(baud_option); read_start(); std::cout << SetCommBreak(serialPort.native_handle()) << std::endl; std::cout << GetLastError() << std::endl; boost::posix_time::ptime mst1 = boost::posix_time::microsec_clock::local_time(); boost::this_thread::sleep(boost::posix_time::millisec(125)); boost::posix_time::ptime mst2 = boost::posix_time::microsec_clock::local_time(); std::cout << ClearCommBreak(serialPort.native_handle()) << std::endl; std::cout << GetLastError() << std::endl; boost::posix_time::time_duration msdiff = mst2 - mst1; std::cout << msdiff.total_milliseconds() << std::endl; } Edit: It was only necessary to look at the combo-box selection of com-ports of wxTerm - no active connection was needed to be established in order to make my code work. I am guessing, that there is some sort of initialisation missing, which is done, when wxTerm is creating the list for the serial-port combo-box.

    Read the article

  • SerialPort.Write() - How to stop writing?

    - by DaniMelo
    Hello, I am developing in C# using the SerialPort class. SerialPort.Write() is a blocking method. How can I exit this method when I want to stop writing? I use a thread to write. I abort this thread when I want to stop writing but the COM port continues to write. Any ideas? Thanks a lot. Sorry for my basic English.

    Read the article

  • Bluetooth not found on BCM43228

    - by TK Kocheran
    I've got a Broadcom BCM43228 mPCIe card which came with my motherboard (ASUS ROG Maximus V Extreme, can't seem to find a link to what the card is) which is working great for WiFi right now, but I can't detect the Bluetooth hardware onboard. In Windows, I have full Bluetooth 4.0 support. $ lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:19.0 Ethernet controller: Intel Corporation 82579V Gigabit Network Connection (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.4 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 5 (rev c4) 00:1c.6 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 7 (rev c4) 00:1c.7 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 8 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 1189 (rev a1) 01:00.1 Audio device: NVIDIA Corporation Device 0e0a (rev a1) 0d:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller 0e:00.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 0f:01.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 0f:04.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 0f:05.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 0f:06.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 0f:07.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 0f:08.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 0f:09.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 10:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller 12:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 01) 15:00.0 Network controller: Broadcom Corporation BCM43228 802.11a/b/g/n 17:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 01) The key line seems to be: 15:00.0 Network controller: Broadcom Corporation BCM43228 802.11a/b/g/n If I try to detect the Bluetooth card, I don't see anything: $ hcitool dev Devices: rfkill list all: Output lspci: Output lsusb: Output I finally found the card with usb-devices: T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0b05 ProdID=17b5 Rev=01.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=############ C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) I've heard that this card needs to have firmware injected into it in order to function. If that's the case, how do I do it?

    Read the article

  • Having problems with high CPU usage and apparent memory leak of Exim

    - by Dancrumb
    I'm having problems with my server and am hoping you can help. The culprit appears to be exim. The CPU usage is consistently high and the memory usage trends up and up and up for no apparent reason (this is not a heavily used server). To demonstrate the issue, I ran the following: root@server [/var/log]# service exim restart; for iter in `seq 0 9`; do date; top -n1 | grep exim; sleep 10; done Shutting down exim: [ OK ] Shutting down spamd: [ OK ] Starting exim: [ OK ] Sun Jun 6 18:12:07 CDT 2010 62592 root 25 0 11400 6572 2356 R 51.5 1.3 0:00.92 exim 62587 mailnull 18 0 7548 1212 792 S 0.0 0.2 0:00.00 exim Sun Jun 6 18:12:18 CDT 2010 62592 root 25 0 28768 23m 2356 R 57.4 4.6 0:06.75 exim 62587 mailnull 18 0 7548 1212 792 S 0.0 0.2 0:00.00 exim 62588 root 18 0 7536 2052 1648 S 0.0 0.4 0:00.00 exim Sun Jun 6 18:12:28 CDT 2010 62592 root 25 0 36408 30m 2356 R 55.5 6.0 0:12.59 exim 62587 mailnull 18 0 7548 1212 792 S 0.0 0.2 0:00.00 exim 62588 root 18 0 7536 2052 1648 S 0.0 0.4 0:00.00 exim Sun Jun 6 18:12:39 CDT 2010 62592 root 25 0 41396 35m 2356 R 53.5 7.0 0:18.35 exim 62587 mailnull 18 0 7548 1212 792 S 0.0 0.2 0:00.00 exim 62588 root 18 0 7536 2052 1648 S 0.0 0.4 0:00.00 exim Sun Jun 6 18:12:49 CDT 2010 62592 root 25 0 45868 40m 2356 R 47.5 7.8 0:24.06 exim 62587 mailnull 18 0 7548 1212 792 S 0.0 0.2 0:00.00 exim 62588 root 18 0 7536 2052 1648 S 0.0 0.4 0:00.00 exim Sun Jun 6 18:13:00 CDT 2010 62592 root 25 0 50056 44m 2356 R 55.3 8.6 0:29.84 exim 62587 mailnull 18 0 7548 1212 792 S 0.0 0.2 0:00.00 exim 62588 root 18 0 7536 2052 1648 S 0.0 0.4 0:00.00 exim Sun Jun 6 18:13:10 CDT 2010 62592 root 25 0 53888 47m 2356 R 55.2 9.4 0:35.63 exim 62587 mailnull 18 0 7548 1212 792 S 0.0 0.2 0:00.00 exim 62588 root 18 0 7536 2052 1648 S 0.0 0.4 0:00.00 exim Sun Jun 6 18:13:21 CDT 2010 62592 root 20 0 56920 50m 2356 R 55.3 9.9 0:41.15 exim 62587 mailnull 18 0 7548 1212 792 S 0.0 0.2 0:00.00 exim 62588 root 18 0 7536 2052 1648 S 0.0 0.4 0:00.00 exim Sun Jun 6 18:13:31 CDT 2010 62592 root 25 0 60380 54m 2356 R 53.4 10.6 0:46.98 exim 62587 mailnull 18 0 7548 1212 792 S 0.0 0.2 0:00.00 exim 62588 root 18 0 7536 2052 1648 S 0.0 0.4 0:00.00 exim Sun Jun 6 18:13:42 CDT 2010 62592 root 22 0 63400 57m 2356 R 49.5 11.2 0:52.74 exim 62587 mailnull 18 0 7548 1212 792 S 0.0 0.2 0:00.00 exim 62588 root 18 0 7536 2052 1648 S 0.0 0.4 0:00.00 exim After some time, it gets to a rate of picking up an extra MB every 10s. I've checked the exim logs and there are no messages coming in there. exim -bV shows: Exim version 4.69 #1 built 16-Mar-2009 14:44:43 Copyright (c) University of Cambridge 2006 Berkeley DB: Sleepycat Software: Berkeley DB 4.2.52: (February 22, 2005) Support for: crypteq iconv() IPv6 PAM Perl OpenSSL Content_Scanning Old_Demime Experimental_SPF Experimental_SRS Experimental_DomainKeys Lookups: lsearch wildlsearch nwildlsearch iplsearch dbm dbmnz passwd Authenticators: cram_md5 dovecot plaintext spa Routers: accept dnslookup ipliteral manualroute queryprogram redirect Transports: appendfile/maildir autoreply pipe smtp Size of off_t: 8 Configuration file is /etc/exim.conf I'm at something of a loss as to how to proceed. Any recommendations would be well received!

    Read the article

  • Why are people trying to connect to me network on TCP port 445?

    - by Solignis
    I was playing with my new syslog server and had my m0n0wall firewall logs forwarded as a test, I noticed a bunch of recent firewall log entries that say that it blocked other WAN IPs from my ISP (I checked) from connecting to me on TCP port 445. Why would a random computer be trying to connect to me on a port apperently used for Windows SMB shares? Just internet garbage? A port scan? I am just curious. here is what I am seeing Mar 15 23:38:41 gateway/gateway ipmon[121]: 23:38:40.614422 fxp0 @0:19 b 98.82.198.238,60653 -> 98.103.xxx.xxx,445 PR tcp len 20 48 -S IN broadcast Mar 15 23:38:42 gateway/gateway ipmon[121]: 23:38:41.665571 fxp0 @0:19 b 98.82.198.238,60665 -> 98.103.xxx.xxx,445 PR tcp len 20 48 -S IN Mar 15 23:38:43 gateway/gateway ipmon[121]: 23:38:43.165622 fxp0 @0:19 b 98.82.198.238,60670 -> 98.103.xxx.xxx,445 PR tcp len 20 48 -S IN broadcast Mar 15 23:38:44 gateway/gateway ipmon[121]: 23:38:43.614524 fxp0 @0:19 b 98.82.198.238,60653 -> 98.103.xxx.xxx,445 PR tcp len 20 48 -S IN broadcast Mar 15 23:38:44 gateway/gateway ipmon[121]: 23:38:43.808856 fxp0 @0:19 b 98.82.198.238,60665 -> 98.103.xxx.xxx,445 PR tcp len 20 48 -S IN Mar 15 23:38:44 gateway/gateway ipmon[121]: 23:38:43.836313 fxp0 @0:19 b 98.82.198.238,60670 -> 98.103.xxx,xxx,445 PR tcp len 20 48 -S IN broadcast Mar 15 23:38:48 gateway/gateway ipmon[121]: 23:38:48.305633 fxp0 @0:19 b 98.103.22.25 -> 98.103.xxx.xxx PR icmp len 20 92 icmp echo/0 IN broadcast Mar 15 23:38:48 gateway/gateway ipmon[121]: 23:38:48.490778 fxp0 @0:19 b 98.103.22.25 -> 98.103.xxx.xxx PR icmp len 20 92 icmp echo/0 IN Mar 15 23:38:48 gateway/gateway ipmon[121]: 23:38:48.550230 fxp0 @0:19 b 98.103.22.25 -> 98.103.xxx.xxx PR icmp len 20 92 icmp echo/0 IN broadcast Mar 15 23:43:33 gateway/gateway ipmon[121]: 23:43:33.185836 fxp0 @0:19 b 98.86.34.225,64060 -> 98.103.xxx.xxx,445 PR tcp len 20 48 -S IN broadcast Mar 15 23:43:34 gateway/gateway ipmon[121]: 23:43:33.405137 fxp0 @0:19 b 98.86.34.225,64081 -> 98.103.xxx.xxx,445 PR tcp len 20 48 -S IN Mar 15 23:43:34 gateway/gateway ipmon[121]: 23:43:33.454384 fxp0 @0:19 b 98.86.34.225,64089 -> 98.103.xxx.xxx,445 PR tcp len 20 48 -S IN broadcast I blacked out part of my IP address for my own safety.

    Read the article

  • CentOS 6.2 Bridge Setup for KVM

    - by Gaia
    I'm trying to set up bridged networking with KVM on CentOS 6.2 to no avail. There are plenty of docs and tutorials about it, but they all seem to conflict or don't provide info specific enough to my situation. I just don't get it. I access the host via public IP "xxx.xxx.128.58". All other available IPs (/29) should be bridged and made available to the only KVM guest (running a public facing LAMP stack) that will be setup on this machine. The amazingly unhelpful NOC people assigned the extra IPs to eth1. Is this correct? Should br0 bridge to eth0 or eth1? How do I set this up? Here is the relevant info: eth0 Link encap:Ethernet HWaddr 00:25:90:68:FE:BC inet6 addr: fe80::225:90ff:fe68:febc/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:763 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:550811 (537.9 KiB) TX bytes:648 (648.0 b) Memory:fb980000-fba00000 eth1 Link encap:Ethernet HWaddr 00:25:90:68:FE:BD inet addr:xxx.xxx.128.58 Bcast:xxx.xxx.128.63 Mask:255.255.255.248 inet6 addr: fe80::225:90ff:fe68:febd/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1806 errors:0 dropped:0 overruns:0 frame:0 TX packets:1505 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:133166 (130.0 KiB) TX bytes:106070 (103.5 KiB) Memory:fb900000-fb980000 eth1:0 Link encap:Ethernet HWaddr 00:25:90:68:FE:BD inet addr:xxx.xxx.128.59 Bcast:xxx.xxx.128.63 Mask:255.255.255.248 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Memory:fb900000-fb980000 eth1:1 Link encap:Ethernet HWaddr 00:25:90:68:FE:BD inet addr:xxx.xxx.128.60 Bcast:xxx.xxx.128.63 Mask:255.255.255.248 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Memory:fb900000-fb980000 eth1:2 Link encap:Ethernet HWaddr 00:25:90:68:FE:BD inet addr:xxx.xxx.128.61 Bcast:xxx.xxx.128.63 Mask:255.255.255.248 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Memory:fb900000-fb980000 eth1:3 Link encap:Ethernet HWaddr 00:25:90:68:FE:BD inet addr:xxx.xxx.128.62 Bcast:xxx.xxx.128.63 Mask:255.255.255.248 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Memory:fb900000-fb980000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) virbr0 Link encap:Ethernet HWaddr 52:54:00:62:55:68 inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) > cat /etc/sysconfig/network NETWORKING=yes HOSTNAME=XXXX.domain.com > brctl show bridge name bridge id STP enabled interfaces br0 8000.00259068febc no eth0 virbr0 8000.525400625568 yes virbr0-nic > ls -fl | grep ifcfg -rw-r--r-- 1 root root 198 Jun 7 10:58 ifcfg-eth0 -rw-r--r--. 1 root root 254 Oct 7 2011 ifcfg-lo -rw-r--r-- 1 root root 77 Jun 6 18:51 ifcfg-eth1-range0 -rw-r--r-- 1 root root 168 Jun 6 18:50 ifcfg-eth1 > cat ifcfg-eth0 DEVICE="eth0" BOOTPROTO="static" BRIDGE="br0" HWADDR="00:25:90:68:FE:BC" IPV6INIT="yes" MTU="1500" NM_CONTROLLED="yes" ONBOOT="yes" TYPE="Ethernet" IPADDR="yyy.yyy.216.131" NETMASK="255.255.255.128" > cat ifcfg-eth1 DEVICE="eth1" HWADDR="00:25:90:68:FE:BD" NM_CONTROLLED="yes" ONBOOT="yes" BOOTPROTO="static" IPADDR="xxx.xxx.128.58" NETMASK="255.255.255.248" GATEWAY="xxx.xxx.128.57" > cat ifcfg-eth1-range0 IPADDR_START="xxx.xxx.128.59" IPADDR_END="xxx.xxx.128.62" CLONENUM_START="0" Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface xxx.xxx.128.56 * 255.255.255.248 U 0 0 0 eth1 192.168.122.0 * 255.255.255.0 U 0 0 0 virbr0 link-local * 255.255.0.0 U 1003 0 0 eth1 default xxx.xxx.128.57 0.0.0.0 UG 0 0 0 eth1

    Read the article

  • Postfix certificate verification failed for smtp.gmail.com

    - by Andi Unpam
    I have problem, my email server using postfix with gmail smtp, i use account google apps, but always ask for SASL authentication failed, I sent an email using php script, after I see the error logs in the wrong password, after I open the URL from the browser and no verification postfixnya captcha and could return, but after 2-3 days later happen like that again. This my config postfix #myorigin = /etc/mailname smtpd_banner = Hostingbitnet Mail Server biff = no append_dot_mydomain = no readme_directory = no myhostname = webmaster.hostingbitnet.com alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = localhost, webmaster.hostingbitnet.com, localhost.localdomain, 103.9.126.163 relayhost = [smtp.googlemail.com]:587 relay_transport = relay relay_destination_concurrency_limit = 1 mynetworks = 127.0.0.0/8, 192.168.0.0/16, 172.16.0.0/16, 10.0.0.0/8, 103.9.126.0/24 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all default_transport = smtp relayhost = [smtp.gmail.com]:587 smtp_sasl_auth_enable = yes smtp_sasl_password_maps = hash:/etc/postfix/google-apps smtp_sasl_security_options = noanonymous smtp_use_tls = yes smtp_sender_dependent_authentication = yes tls_random_source = dev:/dev/urandom default_destination_concurrency_limit = 1 smtp_tls_CAfile = /etc/postfix/tls/root.crt smtp_tls_cert_file = /etc/postfix/tls/cert.pem smtp_tls_key_file = /etc/postfix/tls/privatekey.pem smtp_tls_session_cache_database = btree:$data_directory/smtp_tls_session_cache smtp_tls_security_level = may smtp_tls_loglevel = 1 smtpd_tls_CAfile = /etc/postfix/tls/root.crt smtpd_tls_cert_file = /etc/postfix/tls/cert.pem smtpd_tls_key_file = /etc/postfix/tls/privatekey.pem smtpd_tls_session_cache_database = btree:$data_directory/smtpd_tls_session_cache smtpd_tls_security_level = may smtpd_tls_loglevel = 1 #secure smtpd_recipient_restrictions = permit_mynetworks,permit_sasl_authenticated,check_client_access hash:/var/lib/pop-before-smtp/hosts,reject_unauth_destination Log from mail.log Oct 30 14:51:13 webmaster postfix/smtp[9506]: Untrusted TLS connection established to smtp.gmail.com[74.125.25.109]:587: TLSv1 with cipher RC4-SHA (128/128 bits) Oct 30 14:51:15 webmaster postfix/smtp[9506]: 87E2739400B1: SASL authentication failed; server smtp.gmail.com[74.125.25.109] said: 535-5.7.1 Please log in with your web browser and then try again. Learn more at?535 5.7.1 https://support.google.com/mail/bin/answer.py?answer=78754 ix9sm156630pbc.7 Oct 30 14:51:15 webmaster postfix/smtp[9506]: setting up TLS connection to smtp.gmail.com[74.125.25.108]:587 Oct 30 14:51:15 webmaster postfix/smtp[9506]: certificate verification failed for smtp.gmail.com[74.125.25.108]:587: untrusted issuer /C=US/O=Equifax/OU=Equifax Secure Certificate Authority Oct 30 14:51:16 webmaster postfix/smtp[9506]: Untrusted TLS connection established to smtp.gmail.com[74.125.25.108]:587: TLSv1 with cipher RC4-SHA (128/128 bits) Oct 30 14:51:17 webmaster postfix/smtp[9506]: 87E2739400B1: to=<[email protected]>, relay=smtp.gmail.com[74.125.25.108]:587, delay=972, delays=967/0.03/5.5/0, dsn=4.7.1, status=deferred (SASL authentication failed; server smtp.gmail.com[74.125.25.108] said: 535-5.7.1 Please log in with your web browser and then try again. Learn more at?535 5.7.1 https://support.google.com/mail/bin/answer.py?answer=78754 s1sm3850paz.0) Oct 30 14:51:17 webmaster postfix/error[9508]: B3960394009D: to=<[email protected]>, orig_to=<root>, relay=none, delay=29992, delays=29986/5.6/0/0.07, dsn=4.7.1, status=deferred (delivery temporarily suspended: SASL authentication failed; server smtp.gmail.com[74.125.25.108] said: 535-5.7.1 Please log in with your web browser and then try again. Learn more at?535 5.7.1 https://support.google.com/mail/bin/answer.py?answer=78754 s1sm3850paz.0) BTW I made cert follow the link here http://koti.kapsi.fi/ptk/postfix/postfix-tls-cacert.shtml and it worked, but after 2/3 days my email back to problem invalid SASL, and then i'm required to log in use a browser and enter the captcha there but success log in after input captcha, and my email server can send emails from telnet or php script. but it will be back in trouble after 2/3days later. My question is how to make it permanent certificate? Thanks n greeting.

    Read the article

  • x11vnc working in Ubuntu 10.10

    - by pablorc
    I'm trying to start x11vnc in a Ubuntu 10.10 (my server is in Amazon EC2), but I have the next error $ sudo x11vnc -forever -usepw -httpdir /usr/share/vnc-java/ -httpport 5900 -auth /usr/sbin/gdm 25/11/2010 13:29:51 passing arg to libvncserver: -httpport 25/11/2010 13:29:51 passing arg to libvncserver: 5900 25/11/2010 13:29:51 -usepw: found /home/ubuntu/.vnc/passwd 25/11/2010 13:29:51 x11vnc version: 0.9.10 lastmod: 2010-04-28 pid: 3504 25/11/2010 13:29:51 XOpenDisplay(":0.0") failed. 25/11/2010 13:29:51 Trying again with XAUTHLOCALHOSTNAME=localhost ... 25/11/2010 13:29:51 *************************************** 25/11/2010 13:29:51 *** XOpenDisplay failed (:0.0) *** x11vnc was unable to open the X DISPLAY: ":0.0", it cannot continue. *** There may be "Xlib:" error messages above with details about the failure. Some tips and guidelines: ** An X server (the one you wish to view) must be running before x11vnc is started: x11vnc does not start the X server. (however, see the -create option if that is what you really want). ** You must use -display <disp>, -OR- set and export your $DISPLAY environment variable to refer to the display of the desired X server. - Usually the display is simply ":0" (in fact x11vnc uses this if you forget to specify it), but in some multi-user situations it could be ":1", ":2", or even ":137". Ask your administrator or a guru if you are having difficulty determining what your X DISPLAY is. ** Next, you need to have sufficient permissions (Xauthority) to connect to the X DISPLAY. Here are some Tips: - Often, you just need to run x11vnc as the user logged into the X session. So make sure to be that user when you type x11vnc. - Being root is usually not enough because the incorrect MIT-MAGIC-COOKIE file may be accessed. The cookie file contains the secret key that allows x11vnc to connect to the desired X DISPLAY. - You can explicitly indicate which MIT-MAGIC-COOKIE file should be used by the -auth option, e.g.: x11vnc -auth /home/someuser/.Xauthority -display :0 x11vnc -auth /tmp/.gdmzndVlR -display :0 you must have read permission for the auth file. See also '-auth guess' and '-findauth' discussed below. ** If NO ONE is logged into an X session yet, but there is a greeter login program like "gdm", "kdm", "xdm", or "dtlogin" running, you will need to find and use the raw display manager MIT-MAGIC-COOKIE file. Some examples for various display managers: gdm: -auth /var/gdm/:0.Xauth -auth /var/lib/gdm/:0.Xauth kdm: -auth /var/lib/kdm/A:0-crWk72 -auth /var/run/xauth/A:0-crWk72 xdm: -auth /var/lib/xdm/authdir/authfiles/A:0-XQvaJk dtlogin: -auth /var/dt/A:0-UgaaXa Sometimes the command "ps wwwwaux | grep auth" can reveal the file location. Starting with x11vnc 0.9.9 you can have it try to guess by using: -auth guess (see also the x11vnc -findauth option.) Only root will have read permission for the file, and so x11vnc must be run as root (or copy it). The random characters in the filenames will of course change and the directory the cookie file resides in is system dependent. See also: http://www.karlrunge.com/x11vnc/faq.html I've already tried with some -auth options but the error persist. I have gdm running. Thank you in advance

    Read the article

  • How do I map a friendly name (e.g. www.example.com) to 127.0.0.1:port# on Mac OS X

    - by Fred Finkle
    I am trying to create a demo for a class of mine and I want to configure "fake" domain names on my laptop. A previous question "Can I specify a port in an entry in my /etc/hosts on OS X?" contained an answer indicating that to do it you must use /etc/hosts plus changes to the iptables "If OS X uses iptables you could point xyz.com to some ip in the hosts file like 157.166.226.25 and then: sudo iptables -t nat -A OUTPUT -p tcp --dport 80 -d 157.166.226.25 -j DNAT --to-destination 127.0.0.1:3000 " Since OS X doesn't use iptables, how do I do the equivalent using the tools available on OS X? (the original "asker" seemed to know how to do this, so it wasn't explained). Thanks in advance.

    Read the article

  • repaint problem

    - by user357816
    I have a problem with my repaint in the method move. I dont know what to doo, the code is below import java.awt.*; import java.io.*; import java.text.*; import java.util.*; import javax.sound.sampled.*; import javax.swing.*; import javax.swing.Timer; import java.awt.event.*; import java.lang.*; public class bbb extends JPanel { public Stack<Integer> stacks[]; public JButton auto,jugar,nojugar; public JButton ok,ok2; public JLabel info=new JLabel("Numero de Discos: "); public JLabel instruc=new JLabel("Presiona la base de las torres para mover las fichas"); public JLabel instruc2=new JLabel("No puedes poner una pieza grande sobre una pequenia!"); public JComboBox numeros=new JComboBox(); public JComboBox velocidad=new JComboBox(); public boolean seguir=false,parar=false,primera=true; public int n1,n2,n3; public int click1=0; public int opcion=1,tiempo=50; public int op=1,continuar=0,cont=0; public int piezas=0; public int posx,posy; public int no; public bbb() throws IOException { stacks = new Stack[3]; stacks[0]=new Stack<Integer>(); stacks[1]=new Stack<Integer>(); stacks[2]=new Stack<Integer>(); setPreferredSize(new Dimension(1366,768)); ok=new JButton("OK"); ok.setBounds(new Rectangle(270,50,70,25)); ok.addActionListener(new okiz()); ok2=new JButton("OK"); ok2.setBounds(new Rectangle(270,50,70,25)); ok2.addActionListener(new vel()); add(ok2);ok2.setVisible(false); auto=new JButton("Automatico"); auto.setBounds(new Rectangle(50,80,100,25)); auto.addActionListener(new a()); jugar=new JButton("PLAY"); jugar.setBounds(new Rectangle(100,100,70,25)); jugar.addActionListener(new play()); nojugar=new JButton("PAUSE"); nojugar.setBounds(new Rectangle(100,150,70,25)); nojugar.addActionListener(new stop()); setLayout(null); info.setBounds(new Rectangle(50,50,170,25)); info.setForeground(Color.white); instruc.setBounds(new Rectangle(970,50,570,25)); instruc.setForeground(Color.white); instruc2.setBounds(new Rectangle(970,70,570,25)); instruc2.setForeground(Color.white); add(instruc);add(instruc2); add(jugar);add(nojugar);jugar.setVisible(false);nojugar.setVisible(false); add(info); info.setVisible(false); add(ok); ok.setVisible(false); add(auto); numeros.setBounds(new Rectangle(210,50,50,25)); numeros.addItem(1);numeros.addItem(2);numeros.addItem(3);numeros.addItem(4);numeros.addItem(5); numeros.addItem(6);numeros.addItem(7);numeros.addItem(8);numeros.addItem(9);numeros.addItem(10); add(numeros); numeros.setVisible(false); velocidad.setBounds(new Rectangle(150,50,100,25)); velocidad.addItem("Lenta"); velocidad.addItem("Intermedia"); velocidad.addItem("Rapida"); add(velocidad); velocidad.setVisible(false); } public void Mover(int origen, int destino) { for (int i=0;i<3;i++) { System.out.print("stack "+i+": "); for(int n : stacks[i]) System.out.print(n+";"); System.out.println(""); } System.out.println("de <"+origen+"> a <"+destino+">"); stacks[destino].push(stacks[origen].pop()); System.out.println(""); this.validate(); this.repaint( ); } public void hanoi(int origen, int destino, int cuantas) { while (parar) {} if (cuantas <= 1) Mover(origen,destino); else { hanoi(origen,3 - (origen+destino),cuantas-1); Mover(origen,destino); hanoi(3 - (origen+destino),destino,cuantas-1); } } public void paintComponent(Graphics g) { ImageIcon fondo= new ImageIcon("fondo.jpg"); g.drawImage(fondo.getImage(),0, 0,1366,768,null); g.setColor(new Color((int)(Math.random() * 254), (int)(Math.random() *255), (int)(Math.random() * 255))); g.fillRect(0,0,100,100); g.setColor(Color.white); g.fillRect(150,600,250,25); g.fillRect(550,600,250,25); g.fillRect(950,600,250,25); g.setColor(Color.red); g.fillRect(270,325,10,275); g.fillRect(270+400,325,10,275); g.fillRect(270+800,325,10,275); int x, y,top=0; g.setColor(Color.yellow); x=150;y=580; for(int ii:stacks[0]) { g.fillRect(x+((ii*125)/10),y-(((ii)*250)/10),((10-ii)*250)/10,20);} x=550;y=580; for(int ii:stacks[1]) {g.fillRect(x+((ii*125)/10),y-(((ii)*250)/10),((10-ii)*250)/10,20);} x=950;y=580; for(int ii:stacks[2]) {g.fillRect(x+((ii*125)/10),y-(((ii)*250)/10),((10-ii)*250)/10,20);} System.out.println("ENTRO"); setOpaque(false); } private class play implements ActionListener //manual { public void actionPerformed(ActionEvent algo) { parar=false; if(primera=true) { hanoi(0,2,no); primera=false; } } } private class stop implements ActionListener //manual { public void actionPerformed(ActionEvent algo) { parar=true; } } private class vel implements ActionListener //manual { public void actionPerformed(ActionEvent algo) { if (velocidad.getSelectedItem()=="Lenta") {tiempo=150;} else if (velocidad.getSelectedItem()=="Intermedia") {tiempo=75;} else tiempo=50; ok2.setVisible(false); jugar.setVisible(true); nojugar.setVisible(true); } } private class a implements ActionListener //auto { public void actionPerformed(ActionEvent algo) { auto.setVisible(false); info.setVisible(true); numeros.setVisible(true); ok.setVisible(true); op=3; } } private class okiz implements ActionListener //ok { public void actionPerformed(ActionEvent algo) { no=Integer.parseInt(numeros.getSelectedItem().toString()); piezas=no; if (no>0 && no<11) { info.setVisible(false); numeros.setVisible(false); ok.setVisible(false); for (int i=no;i>0;i--) stacks[0].push(i); opcion=2; if (op==3) { info.setText("Velocidad: ");info.setVisible(true); velocidad.setVisible(true); ok2.setVisible(true); } } else { } repaint(); } } } the code of the other class that calls the one up is below: import java.awt.*; import java.io.*; import java.net.URL; import javax.imageio.*; import javax.swing.*; import javax.swing.border.*; import java.lang.*; import java.awt.event.*; public class aaa extends JPanel { private ImageIcon Background; private JLabel fondo; public static void main(String[] args) throws IOException { JFrame.setDefaultLookAndFeelDecorated(true); final JPanel cp = new JPanel(new BorderLayout()); JFrame frame = new JFrame ("Torres de Hanoi"); frame.setDefaultCloseOperation (JFrame.EXIT_ON_CLOSE); frame.setSize(550,550); frame.setVisible(true); bbb panel = new bbb(); frame.getContentPane().add(panel); frame.pack(); frame.setVisible(true); } }

    Read the article

  • Binary to Ascii and back again

    - by rross
    I'm trying to interface with a hardware device via the serial port. When I use software like Portmon to see the messages they look like this: 42 21 21 21 21 41 45 21 26 21 29 21 26 59 5F 41 30 21 2B 21 27 42 21 21 21 21 41 47 21 27 21 28 21 27 59 5D 41 32 21 2A 21 28 When I run them thru a hex to ascii converter the commands don't make sense. Are these messages in fact something different than hex? My hope was to see the messages the device is passing and emulate them using c#. What can I do to find out exactly what the messages are?

    Read the article

  • Why not port Linux kernel to Common Lisp?

    - by rplevy
    Conventional wisdom states that OS kernels must be written in C in order to achieve the necessary levels of performance. This has been the justification for not using more expressive high level languages. However, for a few years now implementations of Common Lisp such as SBCL have proven to be just as performant as C. What then are the arguments against redoing the kernel in a powerfully expressive language, namely Common Lisp? I don't think anyone (at least anyone who knows what they are talking about) could argue against the fact that the benefits in transparency and readability would be tremendous, not to mention all the things that can't be done in C that can be done in Lisp, but there may be implementation details that would make this a bad idea.

    Read the article

  • Visual Studio 2008 Web Project error: Unable to start program http://localhost:port

    - by JookyDFW
    I am re-hashing this question because I have looked at over 50 threads in different forums and have not been able to get a resolution to my problem. Here are the specs: Windows XP SP3, Visual Studio 2008 SP1, .NET 3.5, ASP. NET MVC 2 project, IE 7 (was IE 8) Up until a few days ago I was not having any issues. It is now happening on any solution that I try to debug. I start a debug session (F5), the solution rebuilds, a VS development web server starts and then I get this error: Unable to start program http://localhost:2012/ If I open a web browser and enter the URL the application loads up. I had upgraded to IE 8 a few weeks ago and read there may be some issues so it has been uninstalled and I am currently on IE 7. Also, while IE 8 was installed I had switched my default browser to Firefox but my current default broweser is now IE7. I have reveiewed the threads on this site and others and have not been able to fix the issue. Any help would be appreciated.

    Read the article

  • Ruby SerialPorts Gem

    - by Seth Archer
    Using Ruby SerialPorts Gem to interact with hardware. When I write a byte array to the hardware using a program called "Serial Port Monitor" the hardware responds correctly. However, when I write the same byte array using ruby it doesn't work unless I do a read request just before the write request. This device doesn't respond correctly with this sp = SerialPort.new(args) sp.write [200.chr, 30.chr, 6.chr, 5.chr, 1.chr, 2.chr, 0.chr, 244.chr] But it does if I add a read request before the write. Like this sp SerialPort.new(args) sp.read sp.write [200.chr, 30.chr, 6.chr, 5.chr, 1.chr, 2.chr, 0.chr, 244.chr] This works, but I'm at a loss as to why. I should also add that the first snippet does work occasionally maybe 1/10 of the time.

    Read the article

  • CherryPy sessions for same domain, different port

    - by detly
    Consider the script below. It will launch two subprocesses, each one a CherryPy app (hit Ctrl+C or whatever the KeyboardInterrupt combo is on your system to end them both). If you run it with CP 3.0 (taking care to change the 3.0/3.1 specific lines in "StartServer"), then visit: http://localhost:15002/ ...you see an empty dict. Then visit: http://localhost:15002/set?val=10 http://localhost:15002/ ...and you see the newly populated dict. Then visit: http://localhost:15012/ ...and go back to http://localhost:15002/ ...and nothing has changed. If you try the same thing with CP 3.1 (remember the lines in "StartServer"!), when you get to the last step, the dict is now empty. This happens in Windows and Debian, Python 2.5 and 2.6. You can try all sorts of things: changing to file storage, separating the storage paths... the only difference it makes is that the sessions might get merged instead of erased. I've read another post about this as well, and there's a suggestion there to put the session tools config keys in the app config rather than the global config, but I don't think that's relevant to this usage where the apps run independently. What do I do to get independent CherryPy applications to NOT interfere with each other? Note: I originally asked this on the CherryPy mailing list but haven't had a response yet so I'm trying here. I hope that's okay. import os, os.path, socket, sys import subprocess import cgi import cherrypy HTTP_PORT = 15002 HTTP_HOST = "127.0.0.1" site1conf = { 'global' : { 'server.socket_host' : HTTP_HOST, 'server.socket_port' : HTTP_PORT, 'tools.sessions.on' : True, # 'tools.sessions.storage_type': 'file', # 'tools.sessions.storage_path': '1', # 'tools.sessions.storage_path': '.', 'tools.sessions.timeout' : 1440}} site2conf = { 'global' : { 'server.socket_host' : HTTP_HOST, 'server.socket_port' : HTTP_PORT + 10, 'tools.sessions.on' : True, # 'tools.sessions.storage_type': 'file', # 'tools.sessions.storage_path': '2', # 'tools.sessions.storage_path': '.', 'tools.sessions.timeout' : 1440}} class Home(object) : def __init__(self, key): self.key = key @cherrypy.expose def index(self): return """\ <html> <body>Session: <br>%s </body> </html> """ % cgi.escape(str(dict(cherrypy.session))) @cherrypy.expose def set(self, val): cherrypy.session[self.key.upper()] = val return """\ <html> <body>Set %s to %s</body> </html>""" % (cgi.escape(self.key), cgi.escape(val)) def StartServer(conf, key): cherrypy.config.update(conf) print 'Starting server (%s)' % key cherrypy.tree.mount(Home(key), '/', {}) # Start the web server. #### 3.0 # cherrypy.server.quickstart() # cherrypy.engine.start() #### #### 3.1 cherrypy.engine.start() cherrypy.engine.block() #### def Main(): # Start first webserver proc1 = subprocess.Popen( [sys.executable, os.path.abspath(__file__), "1"]) proc2 = subprocess.Popen( [sys.executable, os.path.abspath(__file__), "2"]) proc1.wait() proc2.wait() if __name__ == "__main__": print sys.argv if len(sys.argv) == 1: # Master process Main() elif(int(sys.argv[1]) == 1): StartServer(site1conf, 'magic') elif(int(sys.argv[1]) == 2): StartServer(site2conf, 'science') else: sys.exit(1)

    Read the article

  • MacPorts manual port location

    - by gok
    I am installing one library for python from MacPorts. But macports version is older than actual development svn version. Is it possible to specify a custom location for installation in MacPorts so I could install latest library from the developer's site?

    Read the article

  • Where to get apache poi port for .net

    - by Nassign
    I would like to know if there is a website where I could download the Apache POI ported for .net? I already found this link in the web http://www.apache.org/~avik/dist/poi-2.5.1-dev-20040708.dll But the version of apache poi now is 3.6, I was wondering if there is a latest version out there? Does the apache foundation support such porting? I already tried to search the apache website too with no avail. As for using Microsoft library, the excel interopt is not that good for concurrent processing like a web backend. If I use the DocumentFormat.OpenXML library, I have a limitation of creating office 2007 document only.

    Read the article

  • org.smslib port in use exception

    - by danar jabbar
    I am trying to create web application to send sms by gsm modem in JSP first I put destination mobile number and sms text in url and get by request.getparameter and first message sent with no problem but when send a message again by referenshing the same page i get this exception: org.smslib.GatewayException: Comm library exception: java.lang.RuntimeException: gnu.io.PortInUseException: org.smslib at org.smslib.modem.SerialModemDriver.connectPort(SerialModemDriver.java:102) at org.smslib.modem.AModemDriver.connect(AModemDriver.java:114) at org.smslib.modem.ModemGateway.startGateway(ModemGateway.java:189) at org.smslib.Service$1Starter.run(Service.java:276) I tried to stop gateway and stop service but no hope My code: public boolean sendMessage(String strMobileNo,String strSMSText) { try { OutboundMessage outboundMessage=new OutboundMessage(); SMS message=new SMS(); SerialModemGateway gateway = new SerialModemGateway("modem.com1", "COM12", 9600, "Huawie", "EF200"); gateway.setInbound(true); gateway.setOutbound(true); gateway.setSimPin("0000"); gateway.setSmscNumber("+9647701144010"); Service.getInstance().setOutboundMessageNotification(message); Service.getInstance().addGateway(gateway); Service.getInstance().startService(); outboundMessage.setText(strSMSText); outboundMessage.setRecipient(strMobileNo); outboundMessage.setEncoding(Message.MessageEncodings.ENCUCS2); //outboundMessage.setDeliveryDelay(5000); Service.getInstance().sendMessage(outboundMessage); System.out.println(outboundMessage); gateway.stopGateway(); Service.getInstance().stopService(); Thread.sleep(10000); return true; } catch (Exception e) { e.printStackTrace(); return false; } }

    Read the article

  • I want to port my delicious bookmarks to my website

    - by puneet
    I started building a app that will automatically download my delicious bookmarks, and save to a database, so they I can view them on my own website in my favoured format. I am forced to use oAuth, as I have a yahoo id to login to delicious. The problem is I am stuck at the point where oAuth requires a user to manually go and authenticate. Is there a code/ guidelines available anywhere I can follow? All I want is a way to automatically save my bookmarks to my database. Any help is appreciated. I can work on java, .net and php. Thanks.

    Read the article

  • Port a live system from App Engine Helper to App Engine Patch

    - by Alexander
    I am running a live system that is currently serving about 20K pages a day which is based on App Engine Helper (Python) with session support provided by AppEngine utilities. One problem that I have been having is that sessions are occasionally randomly logging out. I would like to try using the App Engine Patch, since it has "native" django session support, but I am worried that this is possibly going to be like doing a brain transplant. Specifically, current database models are all inhereted from BaseModel provided by the App Engine Helper. While, App Engine Patch does not have this inheritance. Does anyone know if it is possible to migrate a live system from App Engine Helper to App Engine Patch? If so, do you have any advice or warnings that I should heed, before attempting this transition? Thank you and kind regards Alex

    Read the article

  • Communication with HyperTerminal [ QT and WINApi ]

    - by javaAmator
    Hi! I write program to communicate with modem (it useing Hayes commands) and this is working. GUI is programmed with QT, but communication with COM port is write with winapi library. I have problem when I want to send with my program message from one computer to another, i can't send Polish chars (they are repleaced by '?'), how can I fix it ? Does anyone have idea ?? And I have one more problem, I can't send message from my program to Microsoft HyperTerminal, HyperTerminal receive something, but not that what I send. Thx for any help :) Important pieces of code: Connect with port: portHandle = CreateFile (portName, GENERIC_WRITE | GENERIC_READ, 0, NULL, OPEN_EXISTING, 0, NULL); GetCommState (portHandle, &dcb); switch(ui->comboBox->currentIndex()) { case 0 : dcb.BaudRate=CBR_110; break; case 1 : dcb.BaudRate=CBR_300; break; case 2 : dcb.BaudRate=CBR_600; break; case 3 : dcb.BaudRate=CBR_1200; break; case 4 : dcb.BaudRate=CBR_2400; break; case 5 : dcb.BaudRate=CBR_4800; break; case 6 : dcb.BaudRate=CBR_9600; break; case 7 : dcb.BaudRate=CBR_14400; break; case 8 : dcb.BaudRate=CBR_19200; break; case 9 : dcb.BaudRate=CBR_38400; break; case 10 : dcb.BaudRate=CBR_56000; break; case 11 : dcb.BaudRate=CBR_57600; break; case 12 : dcb.BaudRate=CBR_115200; break; case 13 : dcb.BaudRate=CBR_128000; break; case 14 : dcb.BaudRate=CBR_256000; break; } dcb.fBinary = TRUE; dcb.fParity = TRUE; dcb.fOutxCtsFlow = FALSE; dcb.fOutxDsrFlow = FALSE; dcb.fDtrControl = DTR_CONTROL_ENABLE; dcb.fDsrSensitivity = FALSE; dcb.fTXContinueOnXoff = TRUE; dcb.fOutX = FALSE; dcb.fInX = FALSE; dcb.fErrorChar = FALSE; dcb.fNull = FALSE; dcb.fRtsControl = RTS_CONTROL_ENABLE; dcb.fAbortOnError = FALSE; //dcb.ByteSize = dataBits; dcb.DCBlength = sizeof (DCB); switch(ui->comboBox_3->currentIndex()) { case 1 : dcb.Parity = EVENPARITY; break; case 3 : dcb.Parity = MARKPARITY; break; case 2 : dcb.Parity = ODDPARITY; break; case 4 : dcb.Parity = SPACEPARITY; break; case 0 : dcb.Parity = NOPARITY; break; } switch (ui->comboBox_4->currentIndex()) { case 0 : dcb.StopBits = ONESTOPBIT; break; case 1 : dcb.StopBits = ONE5STOPBITS;break; case 2 : dcb.StopBits = TWOSTOPBITS; break; } switch (ui->comboBox_2->currentIndex()) { case 0 : dcb.ByteSize = 5; break; case 1 : dcb.ByteSize = 6;break; case 2 : dcb.ByteSize= 7; break; case 3 : dcb.ByteSize = 8; break; } SetCommState (portHandle, &dcb); GetCommTimeouts (portHandle, &CommTimeouts); CommTimeouts.ReadIntervalTimeout = MAXDWORD; CommTimeouts.ReadTotalTimeoutMultiplier = 0; CommTimeouts.ReadTotalTimeoutConstant = 0; CommTimeouts.WriteTotalTimeoutMultiplier = 10; CommTimeouts.WriteTotalTimeoutConstant = 1000; SetCommTimeouts (portHandle, &CommTimeouts); Send MSG: void MainWindow::Send(char c) { do {WriteFile(portHandle, &c, 1, &cbWritten, NULL); } while (!(cbWritten)); } void MainWindow::on_pushButton_clicked() { QString str = ui->lineEdit->text(); std::string str2; ui->lineEdit->clear(); str2 = str.toStdString(); for(int i=0; i < str2.size();i++) { Send(str2[i]); //qDebug()<< str2[i]; } Send(char(13)); } Receive MSG: void ReaderThread::run() { char c; while(1) { c = Receive(); if(c==13) { emit insertPlainText("\n"); } else { emit insertPlainText(QString(c)); } } } char ReaderThread::Receive() { char c; do{ ReadFile(portHandle, &c, 1, &cbRead, NULL); } while (!(cbRead)); return c; }

    Read the article

< Previous Page | 69 70 71 72 73 74 75 76 77 78 79 80  | Next Page >