Search Results

Search found 19788 results on 792 pages for 'remote host'.

Page 730/792 | < Previous Page | 726 727 728 729 730 731 732 733 734 735 736 737  | Next Page >

• How to get faster graphics in KVM? VNC is painfully slow with Haiku OS guest, Spice won't install and SDL doesn't work

  - by Don Quixote

  I've been coming up to speed on the Haiku operating system, an Open Source clone of BeOS 5 Pro. I'm using an Apple MacBook Pro as my development machine. Apple's BootCamp BIOS does not support more than four partitions on the internal hard drive. While I can set up extended and logical partitions, doing so will prevent any of the installed operating systems from booting. To run Haiku directly on the iron, I boot it off a USB stick. Using external storage is also helpful because I am perpetually out of filesystem space. While VirtualBox is documented to allow access to physical drives, I could not actually get it to work. Also VirtualBox can only use one of the host CPU's cores. While VB guests can be configured for more than one CPU, they are only emulated. A full build of the Haiku OS takes 4.5 under VB. I had the hope of reducing build times by using KVM instead, but it's not working nearly as well as VirtualBox did. The Linux Kernel Virtual Machine is broken in all manner of fundamental ways as seen from Haiku. But I'm a coder; maybe I could contribute to fixing some of those problems. The first problem I've got is that Haiku's video in virt-manager is quite painfully slow. When I drag Haiku windows around the desktop, they lag quite far behind where my mouse is. It's quite difficult to move a window to a precise position on the screen. Just imagine that the mouse was connected to the window title bar with a really stretchy spring. Also Haiku's mouse lags quite far behind where I have moved it. I found lots of Personal Package Archives that enable Spice from QEMU / KVM at the Ubuntu Personal Package Arhives. I tried a few of the PPAs but none of them worked; with one of them, the command "add-apt-repository" crashed with a traceback. There is a Wiki page about Spice, but it says that it only works on 64-bit. My Early 2006 MacBook Pro is 32-bit. Its Apple Model Identifier is MacBookPro1,1; these use Core Duos NOT Core 2 Duos. I don't mind building a source deb for 32-bit if I can expect it to work. Is there some reason that Spice should be 64-bit only? Does it need features of the x86_64 Instruction Set Architecture that x86 does not have? When I try using SDL from virt-manager, the configuration for Local SDL Window says "Xauth: /home/mike/.Xauthority". When I try to start my guest, virt-manager emits an error. When I Googled the error message, the usual solution was to make ~/.Xauthority readible. However, .Xauthorty does not exist in my home directory. Instead I have a $XAUTHORITY environment variable. There is no way to configure SDL in virt-manager to use $XAUTHORITY instead of ~/.Xauthority. Neither does it work to copy the value of $XAUTHORITY into the file. I am ready to scream, because I've been five fscking days trying to make KVM work for Haiku development. There is a whole lot more that is broken than the slow video. All I really want to do for now is speed up my full builds of Haiku by using "jam -j2" to use both cores in my CPU. I may try Xen next, but the last time I monkeyed with Xen it was far, far more broken than I am finding KVM to be. Just for now, I would be satisfied if there were some way to use my USB stick as a drive in VirtualBox. VB does allow me to configure /dev/sdb as a drive, but it always causes a fatal error when I try to launch the guest. Thank You For Any Advice You Can Give Me. -

  Read the article

• Heterogeneous Datacenter Management with Enterprise Manager 12c

  - by Joe Diemer

  The following is a Guest Blog, contributed by Bryce Kaiser, Product Manager at Blue MedoraWhen I envision a perfect datacenter, it would consist of technologies acquired from a single vendor across the entire server, middleware, application, network, and storage stack - Apps to Disk - that meets your organization’s every IT requirement with absolute best-of-breed solutions in every category.   To quote a familiar motto, your datacenter would consist of "Hardware and Software, Engineered to Work Together".  In almost all cases, practical realities dictate something far less than the IT Utopia mentioned above.   You may wish to leverage multiple vendors to keep licensing costs down, a single vendor may not have an offering in the IT category you need, or your preferred vendor may quite simply not have the solution that meets your needs.    In other words, your IT needs dictate a heterogeneous IT environment.  Heterogeneity, however, comes with additional complexity. The following are two pretty typical challenges:1) No End-to-End Visibility into the Enterprise Wide Application Deployment. Each vendor solution which is added to an infrastructure may bring its own tooling creating different consoles for different vendor applications and platforms.2) No Visibility into Performance Bottlenecks. When multiple management tools operate independently, you lose diagnostic capabilities including identifying cross-tier issues with database, hung-requests, slowness, memory leaks and hardware errors/failures causing DB/MW issues. As adoption of Oracle Enterprise Manager (EM) has increased, especially since the release of Enterprise Manager 12c, Oracle has seen an increase in the number of customers who want to leverage their investments in EM to manage non-Oracle workloads.  Enterprise Manager provides a single pane of glass view into their entire datacenter.  By creating a highly extensible framework via the Oracle EM Extensibility Development Kit (EDK), Oracle has provided the tooling for business partners such as my company Blue Medora as well as customers to easily fill gaps in the ecosystem and enhance existing solutions.  As mentioned in the previous post on the Enterprise Manager Extensibility Exchange, customers have access to an assortment of Oracle and Partner provided solutions through this Exchange, which is accessed at http://www.oracle.com/goto/emextensibility.  Currently, there are over 80 Oracle and partner provided plug-ins across the EM 11g and EM 12c versions.  Blue Medora is one of those contributing partners, for which you will find 3 of our solutions including our flagship plugin for VMware.  Let's look at Blue Medora’s VMware plug-in as an example to what I'm trying to convey.  Here is a common situation solved by true visibility into your entire stack:Symptoms•    My database is bogging down, however the database appears okay internally.  Maybe it’s starved for resources?•    My OS tooling is showing everything is “OK”.  Something doesn’t add up. Root cause•    Through the VMware plugin we can see the problem is actually on the virtualization layer Solution•    From within Enterprise Manager  -- the same tool you use for all of your database tuning -- we can overlay the data of the database target, host target, and virtual machine target for a true picture of the true root cause. Here is the console view: Perhaps your monitoring conditions are more specific to your environment.  No worries, Enterprise Manager still has you covered.  With Metric Extensions you have the “Next Generation” of User-Defined Metrics, which easily bring the power of your existing management scripts into a single console while leveraging the proven Enterprise Manager framework. Simply put, Oracle Enterprise manager boasts a growing ecosystem that provides the single pane of glass for your entire datacenter from the database and beyond.  Bryce can be contacted at [email protected]

  Read the article

• BizTalk 2009 - The Community ODBC Adapter: Schema Generation

  - by Stuart Brierley

  Having previously detailed the installation of the Community ODBC Adapter for BizTalk 2009, the next thing I will be looking at is the generation of schemas using this ODBC adapter. Within your BizTalk 2009 project, right click the project and select Add Generated Items.  In the resultant window choose Add Adapter Metadata and click Add to open the Add Adapter Wizard. Check that the BizTalk Server and Database names are correct, select the ODBC adapter and click next. You must now set the connection string. To start with choose set, then new DSN (data source name). You now need to define the Data Source you will be connecting to.  On the User DSN tab select Add add then driver you want to use. In this case I am going to use the MySQL ODBC Driver.  A User DSN will only be visible on the current machine with you as a user. * Although I initially set up a User DSN and this was fine for creating schemas with, I later realised that you actually need a system DSN as the BizTalk host service needs this to be able connect to the database on a receive or send port. You will then be asked to Set up the MySQL ODBC Data Source.  In my case this is a local database making use of named pipes, so I had to make sure that I ticked the "Force use of named pipes" check box and removed the "# The Pipe the MySQL Server will use socket=mysql" line from the mysql.ini; with this is place the connection would fail as there is no apparent way to specify the pipe name in the ODBC driver configuration. This will then update the User DSN tab with the new Data Source.  Make sure that you select it and press OK. Select it again in the Choose Data Source window and press OK.  On the ODBC transport window select next. You will now be presented with the Schema Information window, where you must supply the namespace, type and root element names for your schema. Next choose the type of statement that you will be using to create your schema - in this case I am using a stored procedure. *I later discovered that this option is fine for MySQL stored procedures without input parameters, but failed for MySQL stored procedures with input parameters.  (I will be posting on the way to handle input parameters soon) Next you will need to specify the name of the stored procedure.  In this case I have a simple stored procedure to return all the data held by my TestTable in MySQL. Select * from TestTable; The table itself has three columns: Name, Sex and Married. Selecting finish should now hopefully create your schemas based on the input and output from your stored procedure. In my case I have:   An empty schema for the request; after all I have no parameters for the stored procedure.  A response schema comprised of a Table Record with Name, Sex and Married children. Next I will be looking at the use of the ODBC adpater with: Receive ports Send ports

  Read the article

• jrunscript as a cross platform scripting environment

  - by user12798506

  ?????????????????????????????????????????????????????????sh????????????UNIX???????????????????sh???????????????????????????????????????????Windows????????????????? sh??????????????find?grep?sed?awk???Windows??????????????????????????????????????????????????????????????????????????????????????????????Windows???Cygwin????????????sh??????Windows??????????????Cygwin????????????????????????????????????????????JDK?????jrunscript?????JavaScript???????????????????????1?????????jrunscript??????????????????? Windows???UNIX??????????????????????? find?grep?sed?awk?????????sh???????????????Windows Script Host??????? Java????????????? ??????????????????????????????????????????????????????????(?????????????????????????????????????????) ?????????????JDK 6??????????????????????????PC????????????????JDK 6?PC????????????????????????????????????JDK????????????????????????????????????????jrunscript?????????????????????????? ?????jrunscript????JavaScript?????????????????????????????????????????? 1) Windows???UNIX????????????????? ?????????????????????????????????????????JavaScript???mytool.js???????????????????????jrunscript???????????UNIX????sh???????Windows????bat????????????????????? mytool.sh (UNIX?): #!/bin/sh bindir=$(cd $(dirname $0) && pwd) case "`uname`" in CYGWIN*) bindir=`cygpath -w "$bindir"` ;; esac jrunscript "${bindir}/mytool.js" $* mytool.bat (Windows?): @echo off set bindir=%~dp0 jrunscript "%bindir%mytool.js" %* UNIX??sh????????Cygwin???????????????????????????????????????????js??????????????UNIX?Windows??????????????????????????????? 2) jrunscript??cat, cp, find?grep?????? jrunscript???UNIX?????????????????????????????????? jrunscript JavaScript built-in functions ????UNIX??sh?????????????????????UNIX?????????????????????????????????????????src??????????java????????????enum???????java?????????????????????????????????????????????? find('src', '.*.java', function(f) { grep('enum', f); }); ???????UNIX?????????????????????????????????????????????????????????????????????????????????????????cp(from, to)??????????????????????????????????????????UNIX??????????? $ cp -r src/* tmp/ ?????????????????????????????????????????find()???????cp -r????????·?????????????????????? function cpr(fromdir, todir, pattern) { if (pattern == undefined) { pattern = ".*"; } var frdir = pathToFile(fromdir).getCanonicalPath(); find(fromdir, pattern, function(f) { // relative dir of file f from 'fromdir'. var relative = f.getParentFile().getCanonicalPath().substring(frdir.length() + 1); var dstdir = pathToFile(todir + "/" + relative); if (!dstdir.exists()) { // Create the destination dir for file f. mkdirs(dstdir); } // Copy file f to 'dstdir'. cp(f, dstdir + "/" + f.getName()); }); } java?????I/O?API??Windows?????????????"/"??????????????????????????????UNIX?Windows?????????????? ????????????exec(cmd)?????????jar???????????????????????????????????????????? $ jrunscript js> exec("jar xvf example.jar") META-INF/ ?????????????µ???B META-INF/MANIFEST.MF ???W?J???????µ???B com/ ?????????????µ???B com/example/ ?????????????µ???B com/example/Bar.class ???W?J???????µ???B com/example/dummy/ ?????????????µ???B com/example/dummy/dummy.txt ?????o???????µ???B com/example/dummy.properties ?????o???????µ???B com/example/Foo.class ???W?J???????µ???B ???exec()?????????????????????????????????????????????????????????????????Windows????????????I/O??????????????????????????????????BAT????????? errmsg.bat: for /L %%i in (1,1,50) do echo "Error Message count = %%i" 1&2 jrunscript??exec()???????????????18??????????????????????????????????? C:\tmp>jrunscript -e "exec('errmsg.bat')" C:\tmp>for /L %i in (1 1 100) do echo "Error Message count = %i" 1>&2 C:\tmp>echo "Error Message count = 1" 1>&2 : C:\tmp>echo "Error Message count = 18" 1>&2 ? ??? ???????????exec()?????????????????????????????????????????????????????????????????DataInputStream???????????????????????? $ jrunscript js this["exec"].toString() function exec(cmd) { var process = java.lang.Runtime.getRuntime().exec(cmd); var inp = new DataInputStream(process.getInputStream()); var line = null; while ((line = inp.readLine()) != null) { println(line); } process.waitFor(); $exit = process.exitValue(); } ?????????????????????????????????????????????????????exec()???????????????exec()?????????????????????????????exec()??????? function exec(cmd) { var process = java.lang.Runtime.getRuntime().exec(cmd); var stdworker = new java.lang.Runnable( {run: function() { cat(process.getInputStream()); }}); var errworker = new java.lang.Runnable( {run: function() { cat(process.getErrorStream()); }}); new java.lang.Thread(stdworker).start(); new java.lang.Thread(errworker).start(); return proc.waitFor(); } ???????????????????cat()???????????cat()?InputStreamReader?????????????????????????????????????????????????? 3) JavaScript???????????????? JavaScript?Java???????????????????????JavaScript????????????Ruby?Groovy?Scala???????????????????????????????????????????????10MB?????????????????????????????????????JavaScript????????????????????KB?????????????MB?JAR??????????????????????????JRE?JDK?????????????????????????????????????????

  Read the article

• Mastering snow and Java development at jDays in Gothenburg

  - by JavaCecilia

  Last weekend, I took the train from Stockholm to Gothenburg to attend and present at the new Java developer conference jDays. It was professionally arranged in the Swedish exhibition hall close to the amusement park Liseberg and we got a great deal out of the top-level presenters and hallway discussions. Understanding and Improving Your Java Process Our main purpose was to spread information on JVM and our monitoring tools for Java processes, so I held a crash course in the most important terms and concepts if you want to affect the performance of your Java process. From the beginning - the JVM specification to interpretation of heap usage graphs. For correct analysis, you also need to understand something about process memory - you need space for the Java heap (-Xms for initial size and -Xmx for max heap size), but the process memory also contain the thread stacks (to a size of -Xss), JVM internal data structures used for keeping track of Java objects on the heap, method compilation/optimization, native libraries, etc. If you get long pause times, make sure to monitor your application, see the allocation rate and frequency of pause times.My colleague Klara Ward then held a presentation on the Java Mission Control product, the profiling and diagnostics tools suite for HotSpot, coming soon. The room was packed and very appreciated, Klara demonstrated four different scenarios, e.g. how to diagnose and fix latencies due to lock contention for logging.My German colleague, OpenJDK ambassador Dalibor Topic travelled to Sweden to do the second keynote on "Make the Future Java". He let us in on the coming features and roadmaps of Java, now delivering major versions on a two-year schedule (Java 7 2011, Java 8 2013, etc). Also letting us in on where to download early versions of 8, to report problems early on. Software Development in teams Being a scout leader, I'm drilled in different team building and workshop techniques, creating strong groups - of course, I had to attend Henrik Berglund's session on building successful teams. He spoke about the importance of clear goals, autonomy and agreed processes. Thomas Sundberg ended the conference by doing live remote pair programming with Alex in Rumania and a concrete tips for people wanting to try it out (for local collaboration, remember to wash and change clothes). Memory Master Keynote The conference keynote was delivered by the Swedish memory master Mattias Ribbing, showing off by remembering the order of a deck of cards he'd seen once. He made it interactive by forcing the audience to learn a memory mastering technique of remembering ten ordered things by heart, asking us to shout out the order backwards and we made it! I desperately need this - bought the book, will get back on the subject. Continuous Delivery The most impressive presenter was Axel Fontaine on Continuous Delivery. Very well prepared slides with key images of his message and moved about the stage like a rock star. The topic is of course highly interesting, how to create an infrastructure enabling immediate feedback to developers and ability to release your product several times per day. Tomek Kaczanowski delivered a funny and useful presentation on good and bad tests, providing comic relief with poorly written tests and the useful rules of thumb how to rewrite them. To conclude, we had a great time and hope to see you at jDays next year :)

  Read the article

• Teminal non-responsive on load, can't enter anything until CTRL+C

  - by Silver Light

  Hello! I have an issue with terminal in Ubuntu 10.04. When I launch it, it hangs, like this: I cannot do anything until I press CTRL+C: I cannot remember when this started. What can be wrong? Looks like teminal is loading or processing something each time it loads. How can I diagnose and solve this problem? EDIT: Here are the conents of ~/.bashrc: # ~/.bashrc: executed by bash(1) for non-login shells. # see /usr/share/doc/bash/examples/startup-files (in the package bash-doc) # for examples # If not running interactively, don't do anything [ -z "$PS1" ] && return # don't put duplicate lines in the history. See bash(1) for more options # ... or force ignoredups and ignorespace HISTCONTROL=ignoredups:ignorespace # append to the history file, don't overwrite it shopt -s histappend # for setting history length see HISTSIZE and HISTFILESIZE in bash(1) HISTSIZE=1000 HISTFILESIZE=2000 # check the window size after each command and, if necessary, # update the values of LINES and COLUMNS. shopt -s checkwinsize # make less more friendly for non-text input files, see lesspipe(1) [ -x /usr/bin/lesspipe ] && eval "$(SHELL=/bin/sh lesspipe)" # set variable identifying the chroot you work in (used in the prompt below) if [ -z "$debian_chroot" ] && [ -r /etc/debian_chroot ]; then debian_chroot=$(cat /etc/debian_chroot) fi # set a fancy prompt (non-color, unless we know we "want" color) case "$TERM" in xterm-color) color_prompt=yes;; esac # uncomment for a colored prompt, if the terminal has the capability; turned # off by default to not distract the user: the focus in a terminal window # should be on the output of commands, not on the prompt #force_color_prompt=yes if [ -n "$force_color_prompt" ]; then if [ -x /usr/bin/tput ] && tput setaf 1 >&/dev/null; then # We have color support; assume it's compliant with Ecma-48 # (ISO/IEC-6429). (Lack of such support is extremely rare, and such # a case would tend to support setf rather than setaf.) color_prompt=yes else color_prompt= fi fi if [ "$color_prompt" = yes ]; then PS1='${debian_chroot:+($debian_chroot)}\[\033[01;32m\]\u@\h\[\033[00m\]:\[\033[01;34m\]\w\[\033[00m\]\$ ' else PS1='${debian_chroot:+($debian_chroot)}\u@\h:\w\$ ' fi unset color_prompt force_color_prompt # If this is an xterm set the title to user@host:dir case "$TERM" in xterm*|rxvt*) PS1="\[\e]0;${debian_chroot:+($debian_chroot)}\u@\h: \w\a\]$PS1" ;; *) ;; esac # enable color support of ls and also add handy aliases if [ -x /usr/bin/dircolors ]; then test -r ~/.dircolors && eval "$(dircolors -b ~/.dircolors)" || eval "$(dircolors -b)" alias ls='ls --color=auto' #alias dir='dir --color=auto' #alias vdir='vdir --color=auto' alias grep='grep --color=auto' alias fgrep='fgrep --color=auto' alias egrep='egrep --color=auto' fi # some more ls aliases alias ll='ls -alF' alias la='ls -A' alias l='ls -CF' # Add an "alert" alias for long running commands. Use like so: # sleep 10; alert alias alert='notify-send --urgency=low -i "$([ $? = 0 ] && echo terminal || echo error)" "$(history|tail -n1|sed -e '\''s/^\s*[0-9]\+\s*//;s/[;&|]\s*alert$//'\'')"' # Alias definitions. # You may want to put all your additions into a separate file like # ~/.bash_aliases, instead of adding them here directly. # See /usr/share/doc/bash-doc/examples in the bash-doc package. if [ -f ~/.bash_aliases ]; then . ~/.bash_aliases fi # enable programmable completion features (you don't need to enable # this, if it's already enabled in /etc/bash.bashrc and /etc/profile # sources /etc/bash.bashrc). if [ -f /etc/bash_completion ] && ! shopt -oq posix; then . /etc/bash_completion fi # Source .profile if [ -f ~/.profile ]; then . ~/.profile fi Setting -x at the beginning showed me that it tries to repeat this without stopping: +++++++++++++++++++ '[' 'complete -f -X '\''!*.@(pdf|PDF)'\'' acroread gpdf xpdf' '!=' 'complete -f -X '\''!*.@(pdf|PDF)'\'' acroread gpdf xpdf' ']' +++++++++++++++++++ line='complete -f -X '\''!*.@(pdf|PDF)'\'' acroread gpdf xpdf' +++++++++++++++++++ line='complete -f -X '\''!*.@(pdf|PDF)'\'' acroread gpdf xpdf' +++++++++++++++++++ line=' acroread gpdf xpdf' +++++++++++++++++++ list=("${list[@]}" $line) +++++++++++++++++++ read line

  Read the article

• Paper-free Customer Engagement

  - by Michael Snow

  v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} 12.00 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Appropriate repost from our friends at the AIIM blog: Digital Landfill -- John Mancini, supporting our mission of enabling customer engagement through better technology choices.  ---------- My wife didn't even give me a card for #wpfd - and they say husbands are bad at remembering anniversaries Well, today is the third World Paper Free Day.  I just got off the Tweet Jam, and there was a host of ideas for getting rid of -- or at least reducing -- paper. When we first started talking about "paper-free" most of the reasons raised to pursue this direction were "green" reasons.  I'm glad to see that the thinking has moved on to questions about how getting rid of paper and digitizing processes helps improve customer engagement.  And the bottom line.  And process responsiveness.  Not that the "green" reasons have gone away, but it's nice to see a maturation in the BUSINESS reasons to get rid of paper. Our World Paper Free Handbook (do not, do not, do not print it!) looks at how less paper in the workplace delivers significant benefits. Key findings show eliminating paper from processes can improve the responsiveness of customer service by 300 percent. Removing paper from business processes and moving content to PCs and tablets has the added advantage of helping companies adopt mobile-enable processes and eliminate elapsed time, lost forms, poor data and re-keying. To effectively mobile-enable processes and reduce reliance on paper, data should be captured as close to the point of origination as possible, which makes information easily available to whomever needs it, wherever they are, in the shortest time possible. This handbook summarizes the value of automating manual, paper-based processes. It then goes a step beyond to provide actionable steps that will set you on the path to productivity, profitability, and, yes, less paper.  Get your copy today and send the link around to your peers and colleagues.  Here's the link; please share it! http://www.aiim.org/Research-and-Publications/Research/AIIM-White-Papers/WPFD-Revolution-Handbook And don't miss out on the real world discussions about increasing engagement with WebCenter in new webinars being offered over the next couple of weeks:  October 30, 2012:  ResCare Solves Content Lifecycle Challenges with Oracle WebCenter November 1, 2012: WebCenter Content for Applications: Streamline Processes with Oracle WebCenter Content Management for Human Resources Applications Available On-Demand:  Using Oracle WebCenter to Content-Enable Your Business Applications

  Read the article

• Certify September Updates

  - by Sadia2

  We have added some release and platform certifications to MOS Certify. Applications: Oracle Demantra 12.2.2, 7.3.1.5, 7.3.1.4, 7.3.0.2.0, 7.3.0.0.0 Collaboration Technologies: Oracle Beehive 2.0.1.8.0 Database: Oracle Database Client 12.1.0.1.0, Oracle Clusterware 11.2.0.4.0, Oracle Database 11.2.0.4.0, Oracle Real Application Clusters 11.2.0.4.0 E-Business Suite: Oracle E-Business Suite 12.2.2, 12.1.3, 12.1.2, 12.1.1, 12.0.6, 11.5.10.2 Edge Applications: Oracle AutoVue 20.2.2, 20.2.1, 20.2.0 Enterprise Manager: Enterprise Manager Base Platform - OMS 12.1.0.3.0, Oracle Real User Experience Insight 12.1.0.4.0, 12.1.0.3.0, 12.1.0.1, 11.1 FSGBU Insurance Group: Oracle Health Insurance Claims 2.13.3.0.0 Fusion Middleware: Oracle Business Intelligence Applications 11.1.1.7.1, 7.9.6.4.0, Oracle Discoverer 11.1.1.6.0, Discoverer Administrator 11.1.1.6.0, Discoverer Desktop 11.1.1.6.0, Oracle JDK 1.7.0_40, 1.7.0_25", Oracle JRE 1.7.0_40, 1.7.0_25, Oracle JRockit 6u45 R28.2.7+, Oracle WebCenter Sites 11.1.1.8.0, Oracle WebCenter Sites: Community-Gadgets 11.1.1.8.0, Oracle WebCenter Sites: CIP for File Systems and MS SharePoint 11.1.1.8.0, Oracle WebCenter Sites: CIP for EMC Documentum 11.1.1.8.0 JD Edwards EnterpriseOne: JD Edwards EnterpriseOne Business Services Server 9.1.3.0, 9.1.2.0, 9.1.0.0, JD Edwards EnterpriseOne Mobile Applications 9.1.2.0 Oracle Fusion Applications: Oracle Fusion Applications 11.1.7.0.0 Primavera GBU: Primavera Unifier 9.13.0.0 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} Siebel Enterprise: Siebel Application Server 8.2.2.4.0, 8.2.2.3.0, 8.2.2.2.0, 8.1.1.10.0, 8.1.1.9.0, Siebel Database Server 8.2.2.3.0, 8.1.1.10.0, 8.1.1.9.0, Siebel Remote Client 8.2.2.4.0, 8.2.2.3.0, 8.2.2.2.0, 8.1.1.11.0, 8.1.1.10.0, 8.1.1.9.0, Siebel Tools Client 8.2.2.4.0, 8.2.2.2.0, 8.1.1.11.0, 8.1.1.9.0, Siebel SSO Integration 8.2.2.4.0, 8.2.2.3.0, 8.2.2.2.0, 8.1.1.11.0, 8.1.1.10.0, 8.1.1.9.0

  Read the article

• My LAN USB NIC is not working in ubuntu 11.10?

  - by Gaurav_Java

  Today i start my system its seems that my LAN port is not working . so i buy one USB to LAN adapter and i plug in ubuntu system its doen't connect automatically .when i check result lsusb its shows me that there is one DM9601 Ethernet adapter is connected when i click on network information in panel its shows me that there is something " wired NEtwork (Broadcom NetLink BCM5784M gigabit Ethernet PCIe) I think want some driver for that .i don't have any idea how it can be used ? here output of sudo lspci -nn *00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07) 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) 00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a43] (rev 07) 00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) 00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) 00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) 00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03) 00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) 00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03) 00:1c.2 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 [8086:2944] (rev 03) 00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 03) 00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) 00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) 00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) 00:1d.3 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) 00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) 00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M LPC Interface Controller [8086:2919] (rev 03) 00:1f.2 SATA controller [0106]: Intel Corporation ICH9M/M-E SATA AHCI Controller [8086:2929] (rev 03) 00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03) 02:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5784M Gigabit Ethernet PCIe [14e4:1698] (rev 10) 04:00.0 Network controller [0280]: Intel Corporation WiFi Link 5100 [8086:4232]* sudo lshw -class network *-network description: Ethernet interface product: NetLink BCM5784M Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 10 serial: 00:1f:16:9a:56:98 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.119 firmware=sb v2.19 latency=0 link=no multicast=yes port=twisted pair resources: irq:47 memory:f4500000-f450ffff *-network DISABLED description: Wireless interface product: WiFi Link 5100 vendor: Intel Corporation physical id: 0 bus info: pci@0000:04:00.0 logical name: wlan0 version: 00 serial: 00:22:fa:09:02:00 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlagn driverversion=3.0.0-17-generic firmware=8.83.5.1 build 33692 latency=0 link=no multicast=yes wireless=IEEE 802.11abgn resources: irq:46 memory:f4600000-f4601fff *-network description: Ethernet interface physical id: 4 logical name: eth1 serial: 00:60:6e:00:f1:7d size: 100Mbit/s capacity: 100Mbit/s capabilities: ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=dm9601 driverversion=22-Aug-2005 duplex=full firmware=Davicom DM9601 USB Ethernet ip=192.168.1.34 link=yes multicast=yes port=MII speed=100Mbit/s I am using Wimax internet connection which i have to connect from browser . at that time my system is not showing that i am connected to any wired connection. but when i connect internet from other system after getting conneted to internet . when i plug again my USB LAN then its shows that you are conneted to wired connetion. here is screenshot for conneting wimax from browser after connecting to internet network connection shows

  Read the article

• PowerShell and SMO – be careful how you iterate

  - by Fatherjack

  I’ve yet to have a totally smooth experience with PowerShell and it was late on Friday when I crashed into this problem. I haven’t investigated if this is a generally well understood circumstance and if it is then I apologise for repeating everything. Scenario: I wanted to scan a number of server for many properties, including existing logins and to identify which accounts are bestowed with sysadmin privileges. A great task to pass to PowerShell, so with a heavy heart I started up PowerShellISE and started typing. The script doesn’t come easily to me but I follow the logic of SMO and the properties and methods available with the language so it seemed something I should be able to master. Version #1 of my script. And the results it returns when executed against my home laptop server. These results looked good and for a long time I was concerned with other parts of the script, for all intents and purposes quite happy that this was an accurate assessment of the server. Let’s just review my logic for each step of the code at the top. Lines 1 to 7 just set up our variables and write out the header message Line 8 our first loop, to go through each login on the server Line 10 an inner loop that will assess each role name that each login has been assigned Line 11 a test to see if each role has the name ‘sysadmin’ Line 13 write out the login name with a bright format as it is a sysadmin login Line 17 write out the login name with no formatting It is quite possible that here someone with more PowerShell experience than me will be shouting at their screen pointing at the error I made but to me this made total sense. Until I altered the code, I altered lines 6 and 7 of code above to be: $c = $Svr.Logins.Count write-host “There are $c Logins on the server” This changed my output to look like this: This started alarm bells ringing – there are clearly not 13 logins listed So, let’s see where things are going wrong, edit the script so it looks like this. I’ve highlighted the changes to make Running this code shows me these results Our $n variable should count up by one for each login returned and We are clearly missing some logins. I referenced this list back to Management Studio for my server and see the Logins as below, where there are clearly 13 logins. We see a Login called Annette in SSMS but not in the script results so I opened that up and looked at its properties and it’s server roles in particular. The account has only public access to the server. Inspection of the other logins that the PowerShell script misses out show they too are only members of the public role. Right now I can’t work out whether there is a good reason for this and if it should be expected behaviour or not. Please spend a few minutes to leave a comment if you have an opinion or theory for this. How to get the full list of logins. Clearly I needed to get a full list of the logins so set about reviewing my code to see if there was a better way to iterate through the roles for each login. This is the code that I came up with and I think it is doing everything that I need it to. It gives me the expected results like this: So it seems that the ListMembers() method is the trouble maker in my first versions of the code. I would have expected that ListMembers should return Logins that are only members of the public role, certainly Technet makes no reference to it being left out in it’s Login.ListMembers details. Suffice to say, it’s a lesson learned and I will approach using it with caution in future circumstances.

  Read the article

• Please Help - PHP Form, when no text is entered [migrated]

  - by Joe Turner

  I'm creating a mobile landing page and I have also created a form that allows me to create more, by duplicating a folder that's host to a template file. The script then takes you to a page where you input the company details one by one and press submit. Then the page is created. My problem is, when a field is left out (YouTube for instance), the button is created and is blank. I would like there to be a default text for when there is no text. I've tried a few things and have been struggling to make this work for DAYS! <?php $company = $_POST["company"]; $phone = $_POST["phone"]; $colour = $_POST["colour"]; $email = $_POST["email"]; $website = $_POST["website"]; $video = $_POST["video"]; ?> <div id="contact-area"> <form method="post" action="generate.php"><br> <input type="text" name="company" placeholder="Company Name" /><br> <input type="text" name="slogan" placeholder="Slogan" /><br> <input class="color {required:false}" name="colour" placeholder="Company Colour"><br> <input type="text" name="phone" placeholder="Phone Number" /><br> <input type="text" name="email" placeholder="Email Address" /><br> <input type="text" name="website" placeholder="Full Website - Include http://" /><br> <input type="text" name="video" placeholder="Video URL" /><br> <input type="submit" value="Generate QuickLinks" style="background:url(images/submit.png) repeat-x; color:#FFF"/> </form> That's the form. It takes the variables and post's them to the file below. <?php $File = "includes/details.php"; $Handle = fopen($File, 'w'); ?> <?php $File = "includes/details.php"; $Handle = fopen($File, 'w'); $Data = "<div id='logo'> <h1 style='color:#$_POST[colour]'>$_POST[company]</h1> <h2>$_POST[slogan]</h2> </div> <ul data-role='listview' data-inset='true' data-theme='b'> <li style='background-color:#$_POST[colour]'><a href='tel:$_POST[phone]'>Phone Us</a></li> <li style='background-color:#$_POST[colour]'><a href='mailto:$_POST[email]'>Email Us</a></li> <li style='background-color:#$_POST[colour]'><a href='$_POST[website]'>View Full Website</a></li> <li style='background-color:#$_POST[colour]'><a href='$_POST[video]'>Watch Us</a></li> </ul> \n"; fwrite($Handle, $Data); fclose($Handle); ?> and there is what the form turns into. I need there to be a default link put in incase the field is left blank, witch it is sometimes. Thanks in advance guys.

  Read the article

• PHP code works on Chrome, but not on Firefox or IE (send email via HTML form) [on hold]

  - by Cachirro

  My brother has this form: <form id="lista" action="lista2.php" method="post"> <input name="cf_name" type="text" size="50" hidden="yes" class="obscure"> <input name="cf_email" type="text" size="50" hidden="yes" class="obscure"> <textarea name="cf_message" cols="45" rows="10" hidden="yes" class="obscure"> </textarea> <input type="image" name="submit" value="Enviar Lista por Email" src="imagens/lista_email.png" width="40" height="40" onclick="this.form.elements['cf_message'].value = lista_mail;this.form.elements['cf_name'].value = prompt('Escreva o seu nome:', '');this.form.elements['cf_email'].value = prompt('Escreva o seu email:', '');"> <input name="submit2" type="submit" value="Enviar" hidden="yes" class="obscure"> </form> That calls this PHP file: <?php if ( isset($_POST['submit']) ) { // Dados de autenticacao SMTP $smtpinfo['host'] = 'localhost'; $smtpinfo['port'] = '25'; $smtpinfo['auth'] = true; $smtpinfo['username'] = 'xxx'; $smtpinfo['password'] = 'xxx'; // Dados recebidos do formulario $nome = $_POST['cf_name']; $email = $_POST['cf_email']; $mensagem = $_POST['cf_message']; // Inclusão de ficheiro PEAR. Certifique-se que o PEAR está activado no seu alojamento require_once "Mail.php"; // Corpo da mensagem $body = "Nome: ".$nome; $body.= "\n\n"; $body.= nl2br($mensagem); $headers = array ('From' => $email, 'To' => $smtpinfo["username"], 'Subject' => 'Encomenda Website'); $mail_object = Mail::factory('smtp', $smtpinfo); $mail = $mail_object->send($smtpinfo["username"], $headers, $body); if ( PEAR::isError($mail) ) { echo ("<p>" . $mail->getMessage() . "</p>"); } else { echo ('<b><font color="FFFF00">Mensagem enviada com sucesso.<br><br></b>Seu email: ' . $email . '<br><br></font>'); }} ?> This basically sends an email with some selected products, name and email. The problem is that it works perfectly on Chrome, but not on FF or IE. When the submit image is pressed, the URL changes to the PHP file, but it displays a blank page. After display errors activated: ini_set('display_errors',1); ini_set('display_startup_errors',1); error_reporting(-1) FF/IE display blank page and email isn't sent, Chrome sends the email and displays this: Strict Standards: Non-static method Mail::factory() should not be called statically in /var/www/vhosts/[site url]/httpdocs/lista2.php on line 33 Strict Standards: Non-static method PEAR::isError() should not be called statically, assuming $this from incompatible context in /usr/share/php/Mail/smtp.php , dont know if it helps So, what is causing the email to be sent on chrome and not on FF or IE? Thank you.

  Read the article

• lvm disappeared after disc replacement on raid10

  - by user142295

  here my problem: I am running ubuntu 12.04 on a raid10 (4 disks), on top of which I installed an lvm with two volume groups (one for /, one for /home). The layout of the disks are as follows: Disk /dev/sda: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders, total 2930277168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0003f3b6 Device Boot Start End Blocks Id System /dev/sda1 * 63 481949 240943+ 83 Linux /dev/sda2 481950 2910640634 1455079342+ fd Linux raid autodetect /dev/sda3 2910640635 2930272064 9815715 82 Linux swap / Solaris Disk /dev/sdb: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders, total 2930277168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00069785 Device Boot Start End Blocks Id System /dev/sdb1 63 2910158684 1455079311 fd Linux raid autodetect /dev/sdb2 2910158685 2930272064 10056690 82 Linux swap / Solaris Disk /dev/sdc: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders, total 2930277168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdc1 63 2910158684 1455079311 fd Linux raid autodetect /dev/sdc2 2910158685 2930272064 10056690 82 Linux swap / Solaris Disk /dev/sdd: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders, total 2930277168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000f14de Device Boot Start End Blocks Id System /dev/sdd1 63 2910158684 1455079311 fd Linux raid autodetect /dev/sdd2 2910158685 2930272064 10056690 82 Linux swap / Solaris The first disk (/dev/sda) contains the /boot partition on /dev/sda1. I use grub2 to boot the system off this partition. On top of this raid10 I installed two volume groups, one for /, one for /home. This system worked well, I even exchanged two disks during the last two years. It always worked. But not this time. For the first time, /dev/sda broke. I do not know if this is an issue – I know I would have struggled anyways to overcome the problem with /boot installed on that disk and grub2 installed on the mbr of /dev/sda. Anyways, I did what I always did: start knoppix fire up the raid sudo mdadm --examine -scan which returns ARRAY /dev/md127 UUID=0dbf4558:1a943464:132783e8:19cdff95 start it up sudo mdadm --assemble /dev/md127 fail the failing disk (smart event) sudo mdadm /dev/md127 --fail /dev/sda2 remove the failing disk sudo mdadm /dev/md127 --remove /dev/sda2 stop the raid sudo mdadm -S /dev/md127 take out the disk replace it with a new one create the same partitions as on the failling one add it to the raid sudo mdadm --assemble /dev/md127 sudo mdadm /dev/md127 --add /dev/sda2 wait 4 hours All looks fine: cat /proc/mdstat returns: Personalities : [raid10] md127 : active raid10 sda2[0] sdd1[3] sdc1[2] sdb1[1] 2910158464 blocks 64K chunks 2 near-copies [4/4] [UUUU] unused devices: <none> and sudo mdadm --detail /dev/md127 returns /dev/md127: Version : 0.90 Creation Time : Wed Jun 10 13:08:46 2009 Raid Level : raid10 Array Size : 2910158464 (2775.34 GiB 2980.00 GB) Used Dev Size : 1455079232 (1387.67 GiB 1490.00 GB) Raid Devices : 4 Total Devices : 4 Preferred Minor : 127 Persistence : Superblock is persistent Update Time : Thu Mar 21 16:27:40 2013 State : clean Active Devices : 4 Working Devices : 4 Failed Devices : 0 Spare Devices : 0 Layout : near=2 Chunk Size : 64K UUID : 0dbf4558:1a943464:132783e8:19cdff95 (local to host Microknoppix) Events : 0.4824680 Number Major Minor RaidDevice State 0 8 2 0 active sync /dev/sda2 1 8 17 1 active sync /dev/sdb1 2 8 33 2 active sync /dev/sdc1 3 8 49 3 active sync /dev/sdd1 However, there is no trace of the volume groups. Rebooting into knoppix does not help Restarting the old system (I actually replugged and re-added the failing disk for that – the system begins to start, but then fails to see the / partition – no wonder if the volume group is gone) does not help. sudo vgscan, sudo vgdisplay, sudo lvs, sudo lvdisplay, sudo vgscan –mknodes all returned No volume groups found. I am completely at a loss. Can anyone tell me if and how I can recover my data? Thanks in advance!

  Read the article

• Oracle at ARM TechCon

  - by Tori Wieldt

  ARM TechCon is a technical conference for hardware and software engineers, Oct. 30-Nov 1 in Santa Clara, California. Days two and three of the conference will be geared towards systems designers and software developers, those interested in building ARM processor-based modules, boards, and systems. It will cover all of the hardware and software, tools, ranging from low-power design, networking and connectivity, open source software, and security. Oracle is a sponsor of ARM TechCon, and will present three Java sessions and a hands-on-lab:  "Do You Like Coffee with Your Dessert? Java and the Raspberry Pi" - The Raspberry Pi, an ARM-powered single board computer running a full Linux distro off an SD card has caused a huge wave of interest among developers. This session looks at how Java can be used on a device such as this. Using Java SE for embedded devices and a port of JavaFX, the presentation includes a variety of demonstrations of what the Raspberry Pi is capable of. The Raspberry Pi also provides GPIO line access, and the session covers how this can be used from Java applications. Prepare to be amazed at what this tiny board can do. (Angela Caicedo, Java Evangelist) "Modernizing the Explosion of Advanced Microcontrollers with Embedded Java" - This session explains why Oracle Java ME Embedded is the right choice for building small, connected, and intelligent embedded solutions, such as industrial control applications, smart sensing, wireless connectivity, e-health, or general machine-to-machine (M2M) functionality---extending your business to new areas, driving efficiency, and reducing cost. The new Oracle Java ME Embedded product brings the benefits of Java technology to microcontroller platforms. It is a full-featured, complete, compliant software runtime with value-add features targeted to the embedded space and has the ability to interface with additional hardware components, remote manageability, and over-the-air software updates. It is accompanied by a feature-rich set of tools free of charge. (Fareed Suliman, Java Product Manager) "Embedded Java in Smart Energy and Healthcare" - This session covers embedded Java products and technologies that enable smart and connect devices in the Smart Energy and Healthcare/Medical industries. (speaker Kevin Lee) "Java SE Embedded Development on ARM Made Easy" - This Hands-on Lab aims to show that developers already familiar with the Java develop/debug/deploy lifecycle can apply those same skills to develop Java applications, using Java SE Embedded, on embedded devices. (speaker Jim Connors) In the Oracle booth #603, you can see the following demos: Industry Solutions with JavaThis exhibit consists of a number of industry solutions and how they can be powered by Java technology deployed on embedded systems.  Examples in consumer devices, home gateways, mobile health, smart energy, industrial control, and tablets all powered by applications running on the Java platform are shown.  Some of the solutions demonstrate the ability of Java to connect intelligent devices at the edge of the network to the datacenter or the cloud as a total end-to-end platform.Java in M2M with QualcommThis station will exhibit a new M2M solutions platform co-developed by Oracle and Qualcomm that enables wireless communications for embedded smart devices powered by Java, and share the types of industry solutions that are possible.  In addition, a new platform for wearable devices based on the ARM Cortex M3 platform is exhibited.Why Java for Embedded?Demonstration platforms will show how traditional development environments, tools, and Java programming skills can be used to create applications for embedded devices.  The advantages that Java provides because of  the runtime's abstraction of software from hardware, modularity and scalability, security, and application portability and manageability are shared with attendees. Drop by and see why Java is an optimal applications platform for embedded systems.

  Read the article

• Web Services Example - Part 1: Declarative

  - by Denis T

  In this edition of the ADF Mobile blog we'll tackle part 1 of our Web Service examples. In this posting we'll take a look at using a declarative SOAP Web Service. Getting the sample code: Just click here to download a zip of the entire project. You can unzip it and load it into JDeveloper and deploy it either to iOS or Android. Please follow the previous blog posts if you need help getting JDeveloper or ADF Mobile installed. Defining our Web Service: First off, we should mention that this sample code is using a public web service provided free by CDYNE Corporation that provides weather forecasts by zipcode. Sometimes this service goes down so please ensure you know it's up before reporting this example isn't working. Let's take a look at the web service.  We created this by using the "Web Service Data Control" from the New Gallery and using this link to this wsdl:  "http://wsf.cdyne.com/WeatherWS/Weather.asmx?WSDL"   This web service has several methods but we're interested in GetCityForecastByZIP which takes a single string parameter for the zipcode and the second method, GetWeatherInformation that enumerates all possible forecast descriptions and associated image URLs.  The latter we'll use in the next edition but we included it here for completeness. Defing the Application: After adding a feature to the adfmf-feature.xml file, we added a taskflow to host the application flow.  This comprises of a home screen with a list with items for each method in the web service, "Forecast by Zip" and "Weather Info".  In this application we've also decided to hide the navigation bar since there is only one feature in the application. Forecast by Zip: The "Forecast By ZIP" option first presents the user with a screen where they can enter a zipcode and when the "Search" button is tapped, it executes the GetCityForecastByZIP method.  This is done by binding an Action binding to that method. The easiest way to accomplish this is to just drag & drop the method from the Data Control palette to the AMX page and drop it as a button and let the framework hook it up for you.  There is an inputText component on the page that is bound to a pageFlowScope variable called "zip".  This is used as the parameter to the Action binding when it is executed.  Because the actionListener attribute of the commandButton executes the Web Service each time, we ensure that the method is invoked every time the button is clicked. Weather Info: Unlike the previous method, this time instead of explictly executing the web service method we are using deferred invocation.  What this means is that we will bind to the results of the method and the framework will execute the method when it the data is required to be rendered.  We do this by simply doing a drag & drop of the results of the GetWeatherInformation to the AMX page.  When the page is rendered and the bindings are resolved the framework invokes the method.  This executes the method only when it is needed and fills the Data Control provider.  Because we never re-execute the method, you can click from Home to Weather Info and back many times and the web service is only ever invoked once. Issues and Possible Improvements: One thing you will quickly realize with this example is that the error handling is done by the framework for you. For simple examples this is fine but for real applications you'll want to customize these error messages.  With the declarative invocation of web services, this is difficult.  This is one aspect we'll address in the second installment of the web service examples where we will show you how to do programmatic invocation which allows you better error handling. Another issue you will notice with this example is that we can enumerate the weather information but there isn't an easy way to use that information to show the corresponding description and image as part of the forecast results.  We'll show you how to do this in the next example.

  Read the article

• Teminal hands on load, can't enter anything until CTRL+C

  - by Silver Light

  Hello! I have an issue with terminal in Ubuntu 10.04. When I launch it, it hangs, like this: I cannot do anything until I press CTRL+C: I cannot remember when this started. What can be wrong? Looks like teminal is loading or processing something each time it loads. How can I diagnose and solve this problem? EDIT: Here are the conents of ~/.bashrc: # ~/.bashrc: executed by bash(1) for non-login shells. # see /usr/share/doc/bash/examples/startup-files (in the package bash-doc) # for examples # If not running interactively, don't do anything [ -z "$PS1" ] && return # don't put duplicate lines in the history. See bash(1) for more options # ... or force ignoredups and ignorespace HISTCONTROL=ignoredups:ignorespace # append to the history file, don't overwrite it shopt -s histappend # for setting history length see HISTSIZE and HISTFILESIZE in bash(1) HISTSIZE=1000 HISTFILESIZE=2000 # check the window size after each command and, if necessary, # update the values of LINES and COLUMNS. shopt -s checkwinsize # make less more friendly for non-text input files, see lesspipe(1) [ -x /usr/bin/lesspipe ] && eval "$(SHELL=/bin/sh lesspipe)" # set variable identifying the chroot you work in (used in the prompt below) if [ -z "$debian_chroot" ] && [ -r /etc/debian_chroot ]; then debian_chroot=$(cat /etc/debian_chroot) fi # set a fancy prompt (non-color, unless we know we "want" color) case "$TERM" in xterm-color) color_prompt=yes;; esac # uncomment for a colored prompt, if the terminal has the capability; turned # off by default to not distract the user: the focus in a terminal window # should be on the output of commands, not on the prompt #force_color_prompt=yes if [ -n "$force_color_prompt" ]; then if [ -x /usr/bin/tput ] && tput setaf 1 >&/dev/null; then # We have color support; assume it's compliant with Ecma-48 # (ISO/IEC-6429). (Lack of such support is extremely rare, and such # a case would tend to support setf rather than setaf.) color_prompt=yes else color_prompt= fi fi if [ "$color_prompt" = yes ]; then PS1='${debian_chroot:+($debian_chroot)}\[\033[01;32m\]\u@\h\[\033[00m\]:\[\033[01;34m\]\w\[\033[00m\]\$ ' else PS1='${debian_chroot:+($debian_chroot)}\u@\h:\w\$ ' fi unset color_prompt force_color_prompt # If this is an xterm set the title to user@host:dir case "$TERM" in xterm*|rxvt*) PS1="\[\e]0;${debian_chroot:+($debian_chroot)}\u@\h: \w\a\]$PS1" ;; *) ;; esac # enable color support of ls and also add handy aliases if [ -x /usr/bin/dircolors ]; then test -r ~/.dircolors && eval "$(dircolors -b ~/.dircolors)" || eval "$(dircolors -b)" alias ls='ls --color=auto' #alias dir='dir --color=auto' #alias vdir='vdir --color=auto' alias grep='grep --color=auto' alias fgrep='fgrep --color=auto' alias egrep='egrep --color=auto' fi # some more ls aliases alias ll='ls -alF' alias la='ls -A' alias l='ls -CF' # Add an "alert" alias for long running commands. Use like so: # sleep 10; alert alias alert='notify-send --urgency=low -i "$([ $? = 0 ] && echo terminal || echo error)" "$(history|tail -n1|sed -e '\''s/^\s*[0-9]\+\s*//;s/[;&|]\s*alert$//'\'')"' # Alias definitions. # You may want to put all your additions into a separate file like # ~/.bash_aliases, instead of adding them here directly. # See /usr/share/doc/bash-doc/examples in the bash-doc package. if [ -f ~/.bash_aliases ]; then . ~/.bash_aliases fi # enable programmable completion features (you don't need to enable # this, if it's already enabled in /etc/bash.bashrc and /etc/profile # sources /etc/bash.bashrc). if [ -f /etc/bash_completion ] && ! shopt -oq posix; then . /etc/bash_completion fi # Source .profile if [ -f ~/.profile ]; then . ~/.profile fi Setting -x at the beginning showed me that it tries to repeat this without stopping: +++++++++++++++++++ '[' 'complete -f -X '\''!*.@(pdf|PDF)'\'' acroread gpdf xpdf' '!=' 'complete -f -X '\''!*.@(pdf|PDF)'\'' acroread gpdf xpdf' ']' +++++++++++++++++++ line='complete -f -X '\''!*.@(pdf|PDF)'\'' acroread gpdf xpdf' +++++++++++++++++++ line='complete -f -X '\''!*.@(pdf|PDF)'\'' acroread gpdf xpdf' +++++++++++++++++++ line=' acroread gpdf xpdf' +++++++++++++++++++ list=("${list[@]}" $line) +++++++++++++++++++ read line

  Read the article

• Fast Data - Big Data's achilles heel

  - by thegreeneman

  At OOW 2013 in Mark Hurd and Thomas Kurian's keynote, they discussed Oracle's Fast Data software solution stack and discussed a number of customers deploying Oracle's Big Data / Fast Data solutions and in particular Oracle's NoSQL Database.  Since that time, there have been a large number of request seeking clarification on how the Fast Data software stack works together to deliver on the promise of real-time Big Data solutions.   Fast Data is a software solution stack that deals with one aspect of Big Data, high velocity.   The software in the Fast Data solution stack involves 3 key pieces and their integration:  Oracle Event Processing, Oracle Coherence, Oracle NoSQL Database.   All three of these technologies address a high throughput, low latency data management requirement.   Oracle Event Processing enables continuous query to filter the Big Data fire hose, enable intelligent chained events to real-time service invocation and augments the data stream to provide Big Data enrichment. Extended SQL syntax allows the definition of sliding windows of time to allow SQL statements to look for triggers on events like breach of weighted moving average on a real-time data stream.    Oracle Coherence is a distributed, grid caching solution which is used to provide very low latency access to cached data when the data is too big to fit into a single process, so it is spread around in a grid architecture to provide memory latency speed access.  It also has some special capabilities to deploy remote behavioral execution for "near data" processing.   The Oracle NoSQL Database is designed to ingest simple key-value data at a controlled throughput rate while providing data redundancy in a cluster to facilitate highly concurrent low latency reads.  For example, when large sensor networks are generating data that need to be captured while analysts are simultaneously extracting the data using range based queries for upstream analytics.  Another example might be storing cookies from user web sessions for ultra low latency user profile management, also leveraging that data using holistic MapReduce operations with your Hadoop cluster to do segmented site analysis.  Understand how NoSQL plays a critical role in Big Data capture and enrichment while simultaneously providing a low latency and scalable data management infrastructure thru clustered, always on, parallel processing in a shared nothing architecture. Learn how easily a NoSQL cluster can be deployed to provide essential services in industry specific Fast Data solutions. See these technologies work together in a demonstration highlighting the salient features of these Fast Data enabling technologies in a location based personalization service. The question then becomes how do these things work together to deliver an end to end Fast Data solution.  The answer is that while different applications will exhibit unique requirements that may drive the need for one or the other of these technologies, often when it comes to Big Data you may need to use them together.   You may have the need for the memory latencies of the Coherence cache, but just have too much data to cache, so you use a combination of Coherence and Oracle NoSQL to handle extreme speed cache overflow and retrieval.   Here is a great reference to how these two technologies are integrated and work together.  Coherence & Oracle NoSQL Database.   On the stream processing side, it is similar as with the Coherence case.  As your sliding windows get larger, holding all the data in the stream can become difficult and out of band data may need to be offloaded into persistent storage.  OEP needs an extreme speed database like Oracle NoSQL Database to help it continue to perform for the real time loop while dealing with persistent spill in the data stream.  Here is a great resource to learn more about how OEP and Oracle NoSQL Database are integrated and work together.  OEP & Oracle NoSQL Database.

  Read the article

• Test your internet connection - Emtel Fixed Broadband

  Already at the begin of April, I had a phone conversation with my representative at Emtel Ltd. about some upcoming issues due to the ongoing construction work in my neighbourhood. Unfortunately, they finally raised the house two levels above ours, and of course this has to have a negative impact on the visibility between the WiMAX outdoor unit on the roof and the aimed access point at Medine. So, today I had a technical team here to do a site survey and to come up with potential solutions. Short version: It doesn't look good after all. The site survey Well, the two technicians did their work properly, even re-arranged the antenna to check the connection with another end point down at La Preneuse. But no improvements. Looks like we are out of luck since the construction next door hasn't finished yet and at the moment, it even looks like they are planning to put at least one more level on top. I really wonder about the sanity of the responsible bodies at the local district council. But that's another story. Anyway, the outdoor unit was once again pointed towards Medine and properly fixed with new cable guides (air from the sea and rust...). Both of them did a good job and fine-tuned the reception signal to a mere 3 over 9; compared to the original 7 over 9 I had before the daily terror started. The site survey has been done, and now it's up to Emtel to come up with (better) solutions. Well, I wouldn't mind to have an unlimited, symmetric 3G/UMTS or even LTE connection. Let's see what they can do... Testing the connection There are several online sites available which offer you to check certain aspects of your internet connection. Personally, I'm used to speedtest.net and it works very well. I think it is good and necessary to check your connection from time to time, and only a couple of days ago, I posted the following on Emtel's wall at Facebook (21.05.2013 - 14:06 hrs): Dear Emtel, could you eventually provide an answer on the miserable results of SpeedTest? I chose Rose Hill (Hosted by Emtel Ltd.) as testing endpoint... Sadly, no response to this. Seems that the marketing department is not willing to deal with customers on Facebook. Okay, over at speedtest.net you can use their Flash-based test suite to check your connection to quite a number of servers of different providers world-wide. It's actually very interesting to see the results for different end points and to compare them to each other. The results Following are the results of Rose Hill (hosted by Emtel) and respectively Frankfurt, Germany (hosted by Vodafone DE): Speedtest.net result of 30.05.2013 between Flic en Flac and Rose Hill, Mauritius (Emtel - Fixed Broadband) Speedtest.net result of 30.05.2013 between Flic en Flac and Frankfurt, Germany (Emtel - Fixed Broadband) Luckily, the results are quite similar in terms of connection speed; which is good. I'm currently on a WiMAX tariff called 'Classic Browsing 2', or Fixed Broadband as they call it now, which provides a symmetric line of 768 Kbps (or roughly 0.75 Mbps). In terms of downloads or uploads this means that I would be able to transfer files in either direction with approximately 96 KB/s. Frankly speaking, thanks to compression, my choice of browser and operating system I usually exceed this value and I have download rates up to 120 KB/s - not too bad after all. Only the ping times are a little bit of concern. Due to the difference in distance, or better said based on the number of hubs between the endpoints, they indicate the amount of time that it takes to send a package from your machine to the remote server and get a response back. A lower value is better, and usually the ping is less than 300 ms between Mauritius and Europe. The alternatives in Mauritius Not sure whether I should note this done because for my requirements there are no alternatives to Emtel WiMAX at the moment. It would be great to have your opinion on the situation of internet connectivity in Mauritius. Are there really alternatives? And if so, what are the conditions?

  Read the article

• Apache config that uses two document roots based on whether the requested resource exists in the first [closed]

  - by mattalexx

  Background I have a client site that consists of a CakePHP installation and a Magento installation: /web/example.com/ /web/example.com/app/ <== CakePHP /web/example.com/app/webroot/ <== DocumentRoot /web/example.com/app/webroot/store/ <== Magento /web/example.com/config/ <== Site-wide config /web/example.com/vendors/ <== Site-wide libraries The server runs Apache 2.2.3. The problem The whole company has FTP access and got used to clogging up the /web/example.com/, /web/example.com/app/webroot/, and /web/example.com/app/webroot/store/ directories with their own files. Sometimes these files need HTTP access and sometimes they don't. In any case, this mess makes my job harder when it comes to maintaining the site. Code merges, tarring the live code, etc, is very complicated and usually requires a bunch of filters. Abandoned solution At first, I thought I would set up a new subdomain on the same server, move all of their files there, and change their FTP chroot. But that wouldn't work for these reasons: Firstly, I have no idea (and neither do they remember) what marketing materials they've sent out that contain URLs to certain resources they've uploaded to the server, using the main domain, and also using abstract subdomains that use the main virtual host because it has ServerAlias *.example.com. So suddenly having them only use static.example.com isn't feasible. Secondly, The PHP scripts in their projects are potentially very non-portable. I want their files to stay in as similar an environment as they were built as I can. Also, I do not want to debug their code to make it portable. Half-baked solution After some thought, I decided to find a way to section off the actual website files into another directory that they would not touch. The company's uploaded files would stay where they were. This would ensure that I didn't break any of their projects that needed HTTP access. It would look something like this: /web/example.com/ <== A bunch of their files are in here /web/example.com/app/webroot/ <== 1st DocumentRoot; A bunch of their files are in here /web/example.com/app/webroot/store/ <== Some more are in here /web/example.com/site/ <== New dir; Contains only site files /web/example.com/site/app/ <== CakePHP /web/example.com/site/app/webroot/ <== 2nd DocumentRoot /web/example.com/site/app/webroot/store/ <== Magento /web/example.com/site/config/ <== Site-wide config /web/example.com/site/vendors/ <== Site-wide libraries After I made this change, I would not need to pay attention to anything except for the stuff within /web/example.com/site/ and my job would be a lot easier. I would be the only one changing stuff in there. So here's where the Apache magic would happen: I need an HTTP request to http://www.example.com/ to first use /web/example.com/app/webroot/ as the document root. If nothing is found (no miscellaneous uploaded company projects are found), try finding something within /web/example.com/site/app/webroot/. Another thing to keep in mind is, the site might have some problems if the $_SERVER['DOCUMENT_ROOT'] variable reads /web/example.com/app/webroot/ but the actual files are within /web/example.com/site/app/webroot/. It would be better if the DOCUMENT_ROOT environment variable could be /web/example.com/site/app/webroot/ for anything within the /web/example.com/site/app/webroot/ directory. Conclusion Is my half-baked solution possible with Apache 2.2.3? Is there a better way to solve this problem?

  Read the article

• Wireless device bug on 13.10. BCM4313 registers as eth1 instead of wlan0 and no internet access

  - by user205691

  My Hotel wiFi requires me to login with a username & password after connecting to the hotspot. So, my browser would open a page with username & passwrd fields to login and then connect to internet. But unfortunately, firefox & chromium dont seem to work. i dont think it is browser related but a setting for the wifi router or driver which is creating this issue. using Broadcom 801.11 STA wireless driver (proprietary). tried open source as well but same result !! The image linked below shows my wifi connection setting & Chromium. The login page itself comes up after a long time and after entering the credentials, it keeps loading for ever !! it is the same case for every other browser.. so i dont think its browser issue but something to do with wifi setting or network manager stuff.. interestingly, i am able to connect to WiFi networks with WPA key without any issue. Adhoc hotspot is a problem and that is my regular home network :( .. I hope i can get some help solving this issue ! I have tried repeating the same hotspot after login from my android, by creating a virtual repeater with WPA key and it works. I can browse on ubuntu using this method.. but cant be doing this regularly ! I tried loading the same login page of the hotel wifi while browsing through my repeater wifi created on mobile and screen shot attached below. the page loads up quick and easy.. so this means something is wrong with the way network manager handles adhoc connectivity & login ?? i installed wicd0 but it crashes on startup and not helpful at all ! Screenshot of Chromium page Login page with repeated hotspot ifconfig in my terminal results: krishna@krishna-HP-ENVY-4-Notebook-PC:~$ ifconfig eth0 Link encap:Ethernet HWaddr 28:92:4a:1d:54:fa UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth1 Link encap:Ethernet HWaddr e0:06:e6:89:fa:49 inet addr:10.24.1.71 Bcast:10.24.1.255 Mask:255.255.255.0 inet6 addr: fe80::e206:e6ff:fe89:fa49/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:10940 errors:0 dropped:0 overruns:0 frame:348431 TX packets:6611 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:7669631 (7.6 MB) TX bytes:864195 (864.1 KB) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:2146 errors:0 dropped:0 overruns:0 frame:0 TX packets:2146 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:166120 (166.1 KB) TX bytes:166120 (166.1 KB) I wonder why is the wireless configured under eth1 ? I think this is a bug with earlier ubuntu versions, but is this normal in 13.10 or is there a wrong configuration here ? The wireless device in my pc is BCM4313 and i have installed the bcmwl-kernel-sources, wireless-tools to support the device. i also reinstalled the bcmwl-kernel as suggested on broadcom website, via synaptic package manager. Nothing has changed this situation ! I tried booting into liveUSB and then ifconfig results show wireless under wlan0. But then the wireless connects and loads the login page. So is the problem with the device configuration now ? i really want to get this fixed before i start configuring the other stuff like ATI graphics and such on the laptop for overheating.. lack of internet access is too bad a bug for me :P any help is appreciated!

  Read the article

• Server-Sent Events using GlassFish (TOTD #179)

  - by arungupta

  Bhakti blogged about Server-Sent Events on GlassFish and I've been planning to try it out for past some days. Finally, I took some time out today to learn about it and build a simplistic example showcasing the touch points. Server-Sent Events is developed as part of HTML5 specification and provides push notifications from a server to a browser client in the form of DOM events. It is defined as a cross-browser JavaScript API called EventSource. The client creates an EventSource by requesting a particular URL and registers an onmessage event listener to receive the event notifications. This can be done as shown var url = 'http://' + document.location.host + '/glassfish-sse/simple';eventSource = new EventSource(url);eventSource.onmessage = function (event) { var theParagraph = document.createElement('p'); theParagraph.innerHTML = event.data.toString(); document.body.appendChild(theParagraph);} This code subscribes to a URL, receives the data in the event listener, adds it to a HTML paragraph element, and displays it in the document. This is where you'll parse JSON and other processing to display if some other data format is received from the URL. The URL to which the EventSource is subscribed to is updated on the server side and there are multipe ways to do that. GlassFish 4.0 provide support for Server-Sent Events and it can be achieved registering a handler as shown below: @ServerSentEvent("/simple")public class MySimpleHandler extends ServerSentEventHandler { public void sendMessage(String data) { try { connection.sendMessage(data); } catch (IOException ex) { . . . } }} And then events can be sent to this handler using a singleton session bean as shown: @Startup@Statelesspublic class SimpleEvent { @Inject @ServerSentEventContext("/simple") ServerSentEventHandlerContext<MySimpleHandler> simpleHandlers; @Schedule(hour="*", minute="*", second="*/10") public void sendDate() { for(MySimpleHandler handler : simpleHandlers.getHandlers()) { handler.sendMessage(new Date().toString()); } }} This stateless session bean injects ServerSentEventHandlers listening on "/simple" path. Note, there may be multiple handlers listening on this path. The sendDate method triggers every 10 seconds and send the current timestamp to all the handlers. The client side browser simply displays the string. The HTTP request headers look like: Accept: text/event-streamAccept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3Accept-Encoding: gzip,deflate,sdchAccept-Language: en-US,en;q=0.8Cache-Control: no-cacheConnection: keep-aliveCookie: JSESSIONID=97ff28773ea6a085e11131acf47bHost: localhost:8080Referer: http://localhost:8080/glassfish-sse/faces/index2.xhtmlUser-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10_7_3) AppleWebKit/536.5 (KHTML, like Gecko) Chrome/19.0.1084.54 Safari/536.5 And the response headers as: Content-Type: text/event-streamDate: Thu, 14 Jun 2012 21:16:10 GMTServer: GlassFish Server Open Source Edition 4.0Transfer-Encoding: chunkedX-Powered-By: Servlet/3.0 JSP/2.2 (GlassFish Server Open Source Edition 4.0 Java/Apple Inc./1.6) Notice, the MIME type of the messages from server to the client is text/event-stream and that is defined by the specification. The code in Bhakti's blog can be further simplified by using the recently-introduced Twitter API for Java as shown below: @Schedule(hour="*", minute="*", second="*/10") public void sendTweets() { for(MyTwitterHandler handler : twitterHandler.getHandlers()) { String result = twitter.search("glassfish", String.class); handler.sendMessage(result); }} The complete source explained in this blog can be downloaded here and tried on GlassFish 4.0 build 34. The latest promoted build can be downloaded from here and the complete source code for the API and implementation is here. I tried this sample on Chrome Version 19.0.1084.54 on Mac OS X 10.7.3.

  Read the article

• Process for Securing Web Sites and Applications

  - by Aamir Hasan

  The following quick-start guide provides a detailed overview of how to configure security for IIS 6.0. Reduce the Attack Surface of the Web Server 1.       Enable only essential Windows Server 2003 components and services. 2.       Enable only essential IIS 6.0 components and services. 3.       Enable only essential Web service extensions. 4.       Enable only essential Multipurpose Internet Mail Extensions (MIME) types. 5.       Configure Windows Server 2003 security settings. Prevent Unauthorized Access to Web Sites and Applications 1.       Store content on a dedicated disk volume. 2.       Set IIS Web site permissions. 3.       Set IP address and domain name restrictions. 4.       Set the NTFS file system permissions. Isolate Web Sites and Applications 1.       Evaluate the effects of impersonation on application compatibility: 2·         Identify the impersonation behavior for ASP applications. 3·         Select the impersonation behavior for ASP.NET applications. 4.       Configure Web sites and applications for isolation. Configure User Authentication 1.       Configure Web site authentication. 2·         Select the Web site authentication method. 3·         Configure the Web site authentication method. 4.       Configure File Transfer Protocol (FTP) site authentication. Encrypt Confidential Data Exchanged with Clients 1.       Use Secure Sockets Layer (SSL) to encrypt confidential data. 2.       Use Internet Protocol security (IPSec) or virtual private network (VPN) with remote administration. Maintain Web Site and Application Security 1.       Obtain and apply current security patches. 2.       Enable Windows Server 2003 security logs. 3.       Enable file access auditing for Web site content. 4.       Configure IIS logs. 5.       Review security policies, processes, and procedures.  Note:To secure the Web sites and applications in a Web farm, use the process described in this chapter to configure security for each server in the Web farm. Link:http://www.studentacad.com/post/2010/04/28/Process-for-Securing-Web-Sites-and-Applications.aspx

  Read the article

• Faster Trip to Innovation with Simplified Data Integration: Sabre Holdings Case Study

  - by Tanu Sood

  Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Author: Irem Radzik, Director of Product Marketing, Data Integration, Oracle In today’s fast-paced, competitive environment, IT teams are under pressure to deliver technology solutions for many critical business initiatives as fast as possible. When the focus is on speed, it can be easy to continue to use old style, point-to-point custom scripts that grow organically to the point where they are unmanageable and too costly to maintain. As data volumes, data sources, and end users grow, uncoordinated data integration efforts create significant inefficiencies for both IT and business users. In addition to losing IT productivity due to maintaining spaghetti architecture, data integrity becomes a concern as well. Errors caused by inconsistent, data and manual data entry can prove very costly for companies and disrupt business activities. Many industry leaders recognize now that data should be moved in an automated and reliable manner across all platforms to have one version of the truth. By simplifying their data integration architecture and standardizing on a centralized approach, IT teams now accelerate time to market. Especially, using a centralized, shared-service approach brings agility, increases IT productivity, and frees up resources for innovation. One such industry leader that simplified its data integration architecture is Sabre Holdings. Sabre Holdings provides distribution and technology solutions for the travel industry, and is a winner of Oracle Excellence Awards for Fusion Middleware in 2011 in the data integration category. I had the pleasure to host Sabre Holdings on a public webcast and discuss their data integration best practices for data warehousing. In this webcast Sabre’s Amjad Saeed, presented how the company reduced complexity by consolidating systems and standardizing development on Oracle Data Integrator and Oracle GoldenGate for its global data warehouse development team. With Oracle’s complete real-time data integration solution, Sabre also streamlined support and maintenance operations, achieved real-time view in the execution of the integration processes, and can manage the data warehouse and business intelligence solution performance on demand. By reducing complexity and leveraging timely market insights, the company was able to decrease time to market by 40%. You can now listen to the webcast on demand: Sabre Holdings Case Study: Accelerating Innovation using Oracle Data Integration I invite you to hear directly from Sabre how to use advanced data integration capabilities to enable accelerated innovation. To learn more about Oracle’s data integration offering you can download our free resources.

  Read the article

• Moving StarterSTS to the (Azure) Cloud

  - by Your DisplayName here!

  Quite some people asked me about an Azure version of StarterSTS. While I kinda knew what I had to do to make the move, I couldn’t find the time. Until recently. This blog post briefly documents the necessary changes and design decisions for the next version of StarterSTS which will work both on-premise and on Azure. Provider Fortunately StarterSTS is already based on the idea of “providers”. Authentication, roles and claims generation is based on the standard ASP.NET provider infrastructure. This makes the migration to different data stores less painful. In my case I simply moved the ASP.NET provider database to SQL Azure and still use the standard SQL Server based membership, roles and profile provider. In addition StarterSTS has its own providers to abstract resource access for certificates, relying party registration, client certificate registration and delegation. So I only had to provide new implementations. Signing and SSL keys now go in the Azure certificate store and user mappings (client certificates and delegation settings) have been moved to Azure table storage. The one thing I didn’t anticipate when I originally wrote StarterSTS was the need to also encapsulate configuration. Currently configuration is “locked” to the standard .NET configuration system. The new version will have a pluggable SettingsProvider with versions for .NET configuration as well as Azure service configuration. If you want to externalize these settings into e.g. a database, it is now just a matter of supplying a corresponding provider. Moving between the on-premise and Azure version will be just a matter of using different providers. URL Handling Another thing that’s substantially different on Azure (and load balanced scenarios in general) is the handling of URLs. In farm scenarios, the standard APIs like ASP.NET’s Request.Url return the current (internal) machine name, but you typically need the address of the external facing load balancer. There’s a hotfix for WCF 3.5 (included in v4) that fixes this for WCF metadata. This was accomplished by using the HTTP Host header to generate URLs instead of the local machine name. I now use the same approach for generating WS-Federation metadata as well as information card files. New Features I introduced a cache provider. Since we now have slightly more expensive lookups (e.g. relying party data from table storage), it makes sense to cache certain data in the front end. The default implementation uses the ASP.NET web cache and can be easily extended to use products like memcached or AppFabric Caching. Starting with the relying party provider, I now also provide a read/write interface. This allows building management interfaces on top of this provider. I also include a (very) simple web page that allows working with the relying party provider data. I guess I will use the same approach for other providers in the future as well. I am also doing some work on the tracing and health monitoring area. Especially important for the Azure version. Stay tuned.

  Read the article

• Get More From Your Service Request

  - by Get Proactive Customer Adoption Team

  Leveraging Service Request Best Practices Use best practices to get there faster. In the daily conversations I have with customers, they sometimes express frustration over their Service Requests. They often feel powerless to make needed changes, so their sense of frustration grows. To help you avoid some of the frustration you might feel in dealing with your Service Requests (SR), here are a few pointers that come from our best practice discussions. Be proactive. If you can anticipate some of the questions that Support will ask, or the information they may need, try to provide this up front, when you log the SR. This could be output from the Remote Diagnostic Agent (RDA), if this is a database issue, or the output from another diagnostic tool, if you’re an EBS customer. Any information you can supply that helps us understand the situation better, helps us resolve the issue sooner. As you use some of these tools proactively, you might even find the solution to the problem before you log an SR! Be right. Make sure you have the correct severity level. Since you select the initial severity level, it’s easy to accept the default without considering how significant this may be. Business impact is the driving factor, so make sure you take a moment to select the severity level that is appropriate to the situation. Also, make sure you ask us to change the severity level, should the situation dictate. Be responsive! If this is an important issue to you, quickly follow up on any action plan submitted to you by Oracle Support. The support engineer assigned to your Service Request will be able to move the issue forward more aggressively when they have the needed information. This is crucial in resolving your issues in a timely manner. Be thorough. If there are five questions in the action plan, make sure you provide an answer for all five questions in one response, rather than trickling them in one at a time. This will allow the engineer to look at all of the information as a whole and to avoid multiple trips to your SR, saving valuable time and getting you a resolution sooner. Be your own advocate! You know your situation best; make sure Oracle Support understands both how and why this issue is important to you and your company. Use the escalation process if you're concerned that your SR isn't going the right direction, the right pace, or through the right person. Don't wait until you're frustrated and angry. An escalation is as simple as a quick conversation on the phone and can be amazingly effective in getting your issues back on track. The support manager you speak with is empowered to make any needed changes. Be our partner. You can make your support experience better. When your SR has been resolved, you may receive a survey request. This is intended to get your feedback about how your SR went and what we can do to improve your overall support experience. Oracle Support is here to help you. Our goal with any Service Request is to provide the best possible solution as quickly as possible. With your help, we’ll be able to do this with your Service Request too.  

  Read the article

< Previous Page | 726 727 728 729 730 731 732 733 734 735 736 737  | Next Page >