Search Results

Search found 28163 results on 1127 pages for 'project vba'.

Page 737/1127 | < Previous Page | 733 734 735 736 737 738 739 740 741 742 743 744  | Next Page >

• JDK bug migration: bugs.sun.com now backed by JIRA

  - by darcy

  The JDK bug migration from a Sun legacy system to JIRA has reached another planned milestone: the data displayed on bugs.sun.com is now backed by JIRA rather than by the legacy system. Besides maintaining the URLs to old bugs, bugs filed since the migration to JIRA are now visible too. The basic information presented about a bug is the same as before, but reformatted and using JIRA terminology: Instead of a "category", a bug now has a "component / subcomponent" classification. As outlined previously, part of the migration effort was reclassifying bugs according to a new classification scheme; I'll write more about the new scheme in a subsequent blog post. Instead of a list of JDK versions a bug is "reported against," there is a list of "affected versions." The names of the JDK versions have largely been regularized; code names like "tiger" and "mantis" have been replaced by the release numbers like "5.0" and "1.4.2". Instead of "release fixed," there are now "Fixed Versions." The legacy system had many fields that could hold a sequence of text entries, including "Description," "Workaround", and "Evaluation." JIRA instead only has two analogous fields labeled as "Description" and a unified stream of "Comments." Nearly coincident with switching to JIRA, we also enabled an agent which automatically updates a JIRA issue in response to pushes into JDK-related Hg repositories. These comments include the changeset URL, the user making the push, and a time stamp. These comments are first added when a fix is pushed to a team integration repository and then added again when the fix is pushed into the master repository for a release. We're still in early days of production usage of JIRA for JDK bug tracking, but the transition to production went smoothly and over 1,000 new issues have already been filed. Many other facets of the migration are still in the works, including hosting new incidents filed at bugs.sun.com in a tailored incidents project in JIRA.

  Read the article

• XNA CustomModelAnimationSample problem

  - by Mentoliptus

  I downloaded the official tutorial from:CustomModelAnimationSample It works fine but when I try to replicate it in my project, it fails to load the Tag property in my model. Is found that the probelm is in the line: skinnedModel = Content.Load<Model>("DudeWalk"); This line loads the model from the DudeWalk.fbx file and with the custom SkinnedModelProcessor. It loads the animations data in the model. After the line the Tag property is full. I stepped into the method and it went to the custom ModelData class. I copied everything from the projects CustomModelAnimationWindows and CustomModelAnimationPipeline to my solution and set all the references. I tried the same line of code and couldn't step in the method. It called the default method or model constructor and after the line the model's Tag propetry was null. I have to load the model through my custom SkinnedModelProcessor class, but how I tell the game to use this class? In the tutroail CustomModelClass the line is changed to: model = Content.Load<CustomModel>("tank"); So I assumed that I have to set the generic type to a custom model class, but the first example works without it. If anyone has some useful advice or some other helpful link, I'll be happy to try it.

  Read the article

• What to choose for a multilingual site with support for Markdown and commenting

  - by Kent

  I want to publish articles at a multilingual site. I want to be able to write an article in two languages and have them available on separate URLs: thesite.foo/english-breakfast thesite.com/engelsk-frukost If the users web browser is set to English I'd like to show a small notice at the top of the Swedish version with a link to the English one. The link should have an appropriate rel attribute for a translation (search for hreflang at http://diveintohtml5.org/semantics.html). There should be a way to list all articles belonging to these sets: Swedish only, English only, Swedish versions + English only, English versions + Swedish only. I'd like to publish these as four RSS-feeds. And I would like to have two versions of the main site, one in Swedish (showing Swedish versions + English only) and one in English (showing English versions). I shall be able to write the articles using Markdown, as that is the formatting language I find most convenient. There should be a way for users to comment. And some kind of way for me to protect myself against comment spam. I am leaning towards learning Drupal. I suspect I'll have to code this behavior myself as a module. To be frank I'd rather work with Java. Is Drupal the way to go? Or is there something more suitable for this project?

  Read the article

• Weird behavior when debugging ASP.NET Web application: cookie expires (1/1/0001 12:00AM) by itself on next breakpoint hit.

  - by evovision

  I'm working on ajaxified (Telerik AJAX Manager) ASP.NET application using Visual Studio 2010 (runs with admin privileges) and IIS 7.5. Basically, everything on the page is inside update panels. As for cookies I have custom encrypted "settings" cookie which is added to Response if it's not there on session start. Application runs smoothly, problem was arising when I started the debugging it: Actions:  no breakpoints set, F5 - application has started in debug mode, browser window loaded. I login to site, click on controls, all is fine. Next I set *any* breakpoint somewhere in code, break on it then let it continue running, but once I break again (immediately after first break) and check cookie: it has expired date 1/1/0001 12:00AM and no data in value property. I was storing current language there, which was used inside Page's InitializeCulture event and obviously exception was being raised. I spent several hours trying deleting browser cache, temporary ASP.NET files etc, nothing seemed to work. Same application has been tested on exactly same environment on another PC and no problems with debugging there. After all I've found the solution: visual studio generates for every solution additional .suo file where additional settings are stored, like UI state, breakpoints info, etc, so I deleted it and loaded project again, tried debugging - everything is ok now.

  Read the article

• Unity - Invert Movement Direction

  - by m41n

  I am currently developing a 2,5D Sidescroller in Unity (just starting to get to know it). Right now I added a turn-script to have my character face the appropriate direction of movement, though something with the movement itself is behaving oddly now. When I press the right arrow key, the character moves and faces towards the right. If I press the left arrow key, the character faces towards the left, but "moon-walks" to the right. I allready had enough trouble getting the turning to work, so what I am trying is to find a simple solution, if possible without too much reworking of the rest of my project. I was thinking of just inverting the movement direction for a specific input-key/facing-direction. So if anyone knows how to do something like that, I'd be thankful for the help. If it helps, the following is the current part of my "AnimationChooser" script to handle the turning: Quaternion targetf = Quaternion.Euler(0, 270, 0); // Vector3 Direction when facing frontway Quaternion targetb = Quaternion.Euler(0, 90, 0); // Vector3 Direction when facing opposite way if (Input.GetAxisRaw ("Vertical") < 0.0f) // if input is lower than 0 turn to targetf { transform.rotation = Quaternion.Lerp(transform.rotation, targetf, Time.deltaTime * smooth); } if (Input.GetAxisRaw ("Vertical") > 0.0f) // if input is higher than 0 turn to targetb { transform.rotation = Quaternion.Lerp(transform.rotation, targetb, Time.deltaTime * smooth); } The Values (270 and 90) and Axis are because I had to turn my model itself in the very first place to face towards any of the movement directions.

  Read the article

• Eclipse: would more CPU cores with HyperThreading help increase speed?

  - by Dylan

  I'm programming a very large project in Eclipse. Right now I use a dual core machine with 2GB RAM, but Eclipse is sometimes busy for minutes (refreshing/indexing/building), so I'm upgrading to a new machine (with 16GB RAM and an SSD). Now I must choose between an Intel 2500K or an Intel 2600K that has HyperThreading. The price difference is about $100. Would that be worth it, for Eclipse, or is more memory/faster drive much more important for Eclipse ? Can Eclipse make use of the HyperThreading at all?

  Read the article

• Regulating how much to draw based on how much was drawn last frame.

  - by Mike Howard

  I have a 3D game world on an iPhone (limited graphics speed), and I'm already regulating whether I draw each shape on the screen based on it's size and distance from the camera. Something like... if (how_big_it_looks_from_the_camera > constant) then draw What I want to do now is also take into account how many shapes are being drawn, so that in busier areas of the game world I can draw less than I otherwise would. I tried to do this by dividing how_big_it_looks by the number of shapes that were drawn last frame (well, the square root of this but I'm simplifying - the problem is the same). if (how_big_it_looks / shapes_drawn > constant2) then draw But the check happens at the level of objects which represent many drawn shapes, and if an object containing many shapes is switched on, it increases shapes_drawn lots and switches itself back off the next frame. It flickers on and off. I tried keeping a kind of weighted average of previous values, by each frame doing something like shapes_drawn_recently = 0.9 * shapes_drawn_recently + 0.1 * shapes_just_drawn, but of course it only slows the flickering down because of the nature of the feedback loop. Is there a good way of solving this? My project is in Objective-C, but a general algorithm or pseudo-code is good too. Thanks.

  Read the article

• Collision Detection for a 2D RPG

  - by PHMitrious

  First of all, I have done some research on this topic before asking, and I'm asking this question as a mean to get some opinions on this topic, so I don't make a decision only on my own, but taking into account other people's experience as well. I'm starting a 2D online RPG project. I am using SFML for graphics and input and I'm creating a basic game structure and all for the game, creating modules for each part of the game. Well, let me get to the point I just wanted to give you guys some context. I want to decide on how I'm going to work with collision detection. Well I'm kinda going to work on maps with a tile map divided in layers (as usual) and add an extra 2 layers - not exactly in the map - for objects. So I'll have collisions between objects and agents (players - npcs - monsters - spells etc) and agents and tiles. The seconds one can be easily solved the first one need a little bit of work. I considered both creating a basic collision test engine using polygons and a quadtree to diminish tests since I'm going to be working with big maps with lots of objects - creating both a physical and graphical world representation. And I also considered using a physics engine like Box2D for collision tests. I think the first approach would take more work on my part but the second one would have the overhead of using a whole physics engine for just collision detection and no physics. What do you guys think ?

  Read the article

• Encoding video stream for playback on a vanilla Windows XP with mencoder

  - by Tamás

  I have a bunch of PNG files, generated from a script. They represent consecutive frames of a video sequence and I'd like to encode them into a single AVI file (or some other video format) using mencoder. What parameters should I use to ensure that the video can be viewed on a vanilla Windows XP using Windows Media Player with no extra codecs installed apart from the default ones? So far I've tried -ovc lavc -lavcopts vcodec=wmv2 and -ovc lavc -lavcopts vcodec=msmpeg4 with no success. (Background story: some of the people I'm collaborating with on a scientific project cannot install any codecs on their university computers without the help of the local sysadmins, who are of course not very willing to install anything. I'd like to ensure that they can also view the video files I am creating).

  Read the article

• How to estimate a server specifications for this particular system? [on hold]

  - by Alvaro Fallas

  I'm working in a college project and I'm supposed to specify the server's hardware to hold a system. The system is some kind of social network. And it is supposed to hold around 100 000 users the first year, also the system must be able to handle 1000 users working at the same time. It is the first time I'm asked to do something like this, so I hope you can give me a hand and help me because I feel a little lost. The system's data base is Mysql. I found some server configurations offered by Amazon Web Services, but I don't know which of them is the better for my system due to lack of experience Hope you can help me.

  Read the article

• The Ideal Platform for Oracle Database 12c In-Memory and in-memory Applications

  - by Michael Palmeter (Engineered Systems Product Management)

  Oracle SuperCluster, Oracle's SPARC M6 and T5 servers, Oracle Solaris, Oracle VM Server for SPARC, and Oracle Enterprise Manager have been co-engineered with Oracle Database and Oracle applications to provide maximum In-Memory performance, scalability, efficiency and reliability for the most critical and demanding enterprise deployments. The In-Memory option for the Oracle Database 12c, which has just been released, has been specifically optimized for SPARC servers running Oracle Solaris. The unique combination of Oracle's M6 32 Terabytes Big Memory Machine and Oracle Database 12c In-Memory demonstrates 2X increase in OLTP performance and 100X increase in analytics response times, allowing complex analysis of incredibly large data sets at the speed of thought. Numerous unique enhancements, including the large cache on the SPARC M6 processor, massive 32 TB of memory, uniform memory access architecture, Oracle Solaris high-performance kernel, and Oracle Database SGA optimization, result in orders of magnitude better transaction processing speeds across a range of in-memory workloads. Oracle Database 12c In-Memory The Power of Oracle SuperCluster and In-Memory Applications (Video, 3:13) Oracle’s In-Memory applications Oracle E-Business Suite In-Memory Cost Management on the Oracle SuperCluster M6-32 (PDF) Oracle JD Edwards Enterprise One In-Memory Applications on Oracle SuperCluster M6-32 (PDF) Oracle JD Edwards Enterprise One In-Memory Sales Advisor on the SuperCluster M6-32 (PDF) Oracle JD Edwards Enterprise One Project Portfolio Management on the SuperCluster M6-32 (PDF)

  Read the article

• Visual Studio 2010 editor painfully slow [closed]

  - by Daniel Gehriger

  I'm running out of patience with MS VisualStudio 2010: I'm working on a solution containing ~50 C++ projects. When using the editor, I experience a lag of 1 - 2 seconds whenever I move the cursor to a different line, or when I move to a different window, or generally when the editor losses and gains focus. I went through a whole series of optimizations, to no avail: installed all hotfixes for VS2010 disabled all add-ins and extensions disabled Intellisense deleted all temporary files created by VS2010 disabled hardware acceleration unloaded all but 15 projects disabled tracking changes closed all but one window and so on. This is on a Dual Core machine with SSD harddrive (verified throughput 100MB/s), enough free space on HD, Windows 7 Pro 32-bit with 3GB of RAM and most of it still free. Whenever I type a letter, CPU usage of devenv.exe goes to 50 - 90% in process monitor for 1 - 2 seconds before returning to 5%. I used Process Explorer to analyze registry and file system access, and I only notice frequent accesses to the .sln file (which is quiet small), and a few registry reads, but nothing that would raise a red flag. I don't have this problem with solutions containing less projects, so I'm inclined to think that it's related to the number of projects. For your information, the entire solution has been migrated over the years from VS2005 to VS2008 to now VS2010. Does anyone have any ideas what else I could do to resume work on this project, other than returning to VS2008?

  Read the article

• How ReSharper saved the day

  - by Randy Walker

  The Back Story: As a Microsoft MVP awardee, one of the many benefits is free software, books, and various products.  Some of the producers/manufacturers ask for reviews in exchange, others just ask for a brief mention (nothing is ever really free).  But considering that some of the products are essential to my everyday computing, I never mind mentioning their names and evangelizing their products. One of these tools just happened to save me a countless number of hours.  With the release of Microsoft’s Visual Studio 2010, JetBrains released their new 5.0 version of ReSharper. The Story: My specialty is Visual Basic development.  I am not, and probably will never be a C# developer.  As such, trying to figure out how to debug a C# project, that was written 2 years ago by a contract developer, let’s just say it’s a painful process. I have a special class for config file reading and writing, written in C#.  I kept getting exceptions when the reader would get to a line that had an xml comment in it.  It took me a couple of hours to narrow down where it was happening and why, but I couldn’t figure out the best way to fix it.  It was a for loop that was implicitly casting the type of the variable.  I knew I need to explicitly cast the variable type, but only after the type was verified.  So after I finally got some of the code written, ReSharper gave me some suggestions on how to write the code better. One of the ways was to safely cast the variable into the type I wanted.  Blammo, no more exceptions in a way I hadn’t anticipated.  Instead of having to check the type before I cast it.  Beautiful, simple, and taught me a better way to code C#. Kudos JetBrains … now if it only worked better with VB (then it could be called ReBasic, ReVB, RE???)

  Read the article

• Why Wouldn't Root Be Able to Change a Zone's IP Address in Oracle Solaris 11?

  - by rickramsey

  You might assume that if you have root access to an Oracle Solaris zone, you'd be able to change the root's IP address. If so, you'd proceed along these lines ... First, you'd log in: root@global_zone:~# zlogin user-zone Then you'd remove the IP interface: root@user-zone:~# ipadm delete-ip vnic0 Next, you'd create a new IP interface: root@user-zone:~# ipadm create-ip vnic0 Then you'd assign the IP interface a new IP address (10.0.0.10): root@user-zone:~# ipadm create-addr -a local=10.0.0.10/24 vnic0/v4 ipadm: cannot create address: Permission denied Why would that happen? Here are some potential reasons: You're in the wrong zone Nobody bothered to tell you that you were fired last week. The sysadmin for the global zone (probably your ex-girlfriend) enabled link protection mode on the zone with this sweet little command: root@global_zone:~# dladm set-linkprop -p \ protection=mac-nospoof,restricted,ip-nospoof vnic0 How'd your ex-girlfriend learn to do that? By reading this article: Securing a Cloud-Based Data Center with Oracle Solaris 11 by Orgad Kimchi, Ron Larson, and Richard Friedman When you build a private cloud, you need to protect sensitive data not only while it's in storage, but also during transmission between servers and clients, and when it's being used by an application. When a project is completed, the cloud must securely delete sensitive data and make sure the original data is kept secure. These are just some of the many security precautions a sysadmin needs to take to secure data in a cloud infrastructure. Orgad, Ron, and Richard and explain the rest and show you how to employ the security features in Oracle Solaris 11 to protect your cloud infrastructure. Part 2 of a three-part article on cloud deployments that use the Oracle Solaris Remote Lab as a case study. About the Photograph That's the fence separating a small group of tourist cabins from a pasture in the small town of Tropic, Utah. Follow Rick on: Personal Blog | Personal Twitter | Oracle Forums   Follow OTN Garage on: Web | Facebook | Twitter | YouTube

  Read the article

• Working WCF WebServices with NLB server

  - by gguth

  Im starting the architecture of a new project using WCF, but im not the right person to make some network considerations, so im doing some research but cannot find the answers to these questions: We´ll host the WCF service in a common Windows Service app in 2 servers and we´ll have another server to make the Load-Balancing job using the WNLB. The fact that we are hosting the WCF in a Windows Service app can disturb the NLB job? Before my research i thought the load balancing was tought to configure, but with NLB it seems to be very simple, its really that simple? Note: The binding will be basicHttpBinding

  Read the article

• What is the correct and most efficient approach of streaming vertex data?

  - by Martijn Courteaux

  Usually, I do this in my current OpenGL ES project (for iOS): Initialization: Create two VBO's and one IndexBuffer (since I will use the same indices), same size. Create two VAO's and configure them, both bound to the same Index Buffer. Each frame: Choose a VBO/VAO couple. (Different from the previous frame, so I'm alternating.) Bind that VBO Upload new data using glBufferSubData(GL_ARRAY_BUFFER, ...). Bind the VAO Render my stuff using glDrawElements(GL_***, ...); Unbind the VAO However, someone told me to avoid uploading data (step 3) and render immediately the new data (step 5). I should avoid this, because the glDrawElements call will stall until the buffer is effectively uploaded to VRAM. So he suggested to draw all my geometry I uploaded the previous frame and upload in the current frame what will be drawn in the next frame. Thus, everything is rendered with the delay of one frame. Is this true or am I using the good approach to work with streaming vertex data? (I do know that the pipeline will stall the other way around. Ie: when you draw and immediately try to change the buffer data. But I'm not doing that, since I implemented double buffering.)

  Read the article

• Handy Tool for Code Cleanup: Automated Class Element Reordering

  - by Geertjan

  You're working on an application and this thought occurs to you: "Wouldn't it be cool if I could define rules specifying that all static members, initializers, and fields should always be at the top of the class? And then, whenever I wanted to, I'd start off a process that would actually do the reordering for me, moving class elements around, based on the rules I had defined, automatically, across one or more classes or packages or even complete code bases, all at the same time?" Well, here you go: That's where you can set rules for the ordering of your class members. A new hint (i.e., new in NetBeans IDE 7.3), which you need to enable yourself because by default it is disabled, let's the IDE show a hint in the Java Editor whenever there's code that isn't ordered according to the rules you defined: The first element in a file that the Java Editor identifies as not matching your rules gets a lightbulb hint shown in the left sidebar: Then, when you click the lightbulb, automatically the file is reordered according to your defined rules. However, it's not much fun going through each file individually to fix class elements as shown above. For that reason, you can go to "Refactor | Inspect and Transform". There, in the "Inspect and Transform" dialog, you can choose the hint shown above and then specify that you'd like it to be applied to a scope of your choice, which could be a file, a package, a project, combinations of these, or all of the open projects, as shown below: Then, when Inspect is clicked, the Refactoring window shows all the members that are ordered in ways that don't conform to your rules: Click "Do Refactoring" above and, in one fell swoop, all the class elements within the selected scope are ordered according to your rules.

  Read the article

• SharePoint Unit Testing and Load Testing Finally?

  - by Kit Ong

  It has always been a real pain to incorporate extensive SharePoint Unit Testing and Load Testing in a project, could Visual Studio 2012 finally make this easier? It certaining looks like it, here's a brief overview on SharePoint support in Visual Studio 2012. Load testing – We now support load testing for SharePoint out of the box. This is more involved than you might imagine due to how dynamic SharePoint is. You can’t just record a script and play it back – it won’t work because SharePoint generates and expects dynamic data (like GUIDs). We’ve built the extensions to our load testing solution to parse the dynamic SharePoint data and include it appropriately in subsequent requests. So now you can record a script and play it back and we will dynamically adjust it to match what SharePoint expects.Unit testing – One of the big problems with unit testing SharePoint is that most code requires SharePoint to be running and trying to run tests against a live SharePoint instance is a pain. So we’ve built a SharePoint “emulator” using our new VS 2012 Fakes & Stubs capability. This will make unit testing of SharePoint components WAY easier.Read more in the link belowhttp://blogs.msdn.com/b/bharry/archive/2012/09/12/visual-studio-update-this-fall.aspx

  Read the article

• Metaphor for task synchronization [closed]

  - by nkint

  I'm looking for a metaphor. A friend of mine taught me to use metaphors from nature, everyday life, math, and use them to design my projects. They can help in creating a better design or better understanding or the problem, and they are cool. Now I'm working on a project with hardware and micro-controllers in C. For convenience, I have decided to use multiple micro-controllers as co-processor units for real-time (the slaves) and a master. This has saved me a lot of headache: I can code the main logic in the master without paying too much attention to super optimizing everything; I don't care if I need some blocking-call; I don't worry about serial communication with the computer. I just send messages to the slaves and they are super fast super in real time. I like my design and it seems to work well. So here are the important concepts that I'm trying capture in the metaphor: hierarchy of processing Not using one big brain but rather several small, distributed brain units using distributed power or resources I'm looking for a good metaphor for this concept of having one unit synchronize the work of all the others. Preferably, the metaphor would come from nature, biology, or zoology.

  Read the article

• GPL - what is distribution?

  - by Martin Beckett

  An interesting point came up on another thread about alleged misappropriation of a GPL project. In this case the enterprise software was used by some large companies who essentially took the code, changed the name, removed the GPL notices and used the result. The point was - if the company did this and only used the software internally then there isn't any distribution and that's perfectly legal under GPL. Modifications by their own employees for internal use would also be allowed. So At what point does it become a distribution? Presumably if they brought in outside contractors under 'work for hire' their modifications would also be internal and so not a distribution. If they hired an external software outfit to do modifications and those changes were only used internally by the company - would those changes be distributed? Does the GPL apply to the client or to the external developers? If the company then give the result to another department, another business unit, another company? What if the other company is a wholly owned subsidiary? ps. yes I know the answer is ask a lawyer. But all the discussion I have seen over GPL2/GPL3 distribution has been about webservices - not about internal use.

  Read the article

• Upgrade TFS 2010 build server to support .net 4.5

  - by JustEngland

  What is needed in the tfs 2010 build agent, to build .net 4.5 projects, in tfs 2008 we had to set the MSBuildPath property, but the configuration seems to be different in 2010. I get the following error message. (614): The imported project "C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets" was not found. Confirm that the path in the declaration is correct, and that the file exists on disk. How we handled it in 2008 http://blogs.msdn.com/b/willbar/archive/2009/11/01/building-net-4-0-applications-using-team-build-2008.aspx

  Read the article

• How to make pulseaudio and ubuntu detect the same audio device as alsa driver

  - by Kiwy

  I use Ubuntu 14.04 x64 and I use gnome-shell on my laptop. I have a Bose companion 5 (which is basically a USB sound system) and a HDMI port, both does work perfectly when I just boot with the cable plugin. However, when my laptop go to sleep or get unplugged from those two outputs, if I plug back the device, I end up without any hardware detection (only the built-in speakers) from pulse and gnome-shell sound output selector while if I use alsamixer, the device look up and ready. gstreamer-properties allow me to select and test effectively any device but while alsa recognize any device on the run, pulse is not capable of handling things correctly, my question is then: How can I make pulse detect and use the same hardware as alsa, or how to remove completely and gracefully pulseaudio (meaning volume applet running in gnome shell) I don't mind if the project implies to recompile half gnome shell if it implies those audio outputs work all the time. Pulse does not list my soundcard when I use command pactl list cards while the module plug&play for sound card is loaded in pactl list modules. I really don't know what to do, the behavior seems pretty random.

  Read the article

• Software design of a browser-based strategic MMO game

  - by Mehran

  I wonder if there are any known tested software designs for Travian-like browser-based strategic MMO games? I mean how would they implement the server of such games or what is stored in database and what is stored in RAM? Is the state of the world stored in one piece or is it distributed among a number of storage? Does anyone know a resource to study the problems and solutions of creating such games? [UPDATE] Suggested in comments, I'm going to give an example how would I design such a project. Even though I'm not sure if I'm proposing the right one. Having stored the world state in a MongoDB, I would implement an event collection in which all the changes to the world will register. Changes that are meant to happen in the future will come with an action date set to the future and those that are to be carried out immediately will be set to now. Having this datastore as the central point of the system, players will issue their actions as events inserted in datastore. At the other end of the system, I'll have a constant-running software taking out events out of the datastore which are due to be carried out and not done yet. Executing an event means apply some update on the world's state and thus the datastore. As scalable as this design sounds, I'm not sure if it will be worth implementing. For one, it is pointless to cache the datastore as most of updates happen once without any follow ups. For instance if you have the growth of resources in your game, you'll be updating the whole world state periodically in which case, having incorporated a cache, you are keeping the whole world in RAM (which most likely is impossible). So can someone come up with a better design?

  Read the article

• "Siebel2FusionCRM Integration" solution by ec4u (D)

  - by Richard Lefebvre

  ec4u, a CRM System Integration leader based in Germany and Switzerland, and an historical Oracle/Siebel partner, offers a complete "Siebel2FusionCRM Integration" solution, based on tools methodology and services. ec4u Siebel2FusionCRM Integration solution's main objectives are: Integration between Siebel (on-premise) and Fusion CRM / Marketing (“in the cloud”) Accounts, Contacts and Addresses are maintained by Sales in Siebel CRM and synchronized in real-time into Fusion CRM / Marketing CDM Processing ensures clean data for marketing campaigns (validation and deduplication) Create E-Mail marketing campaigns and newsletters in Fusion The solution features: Upsert processes figure out what information needs to be updated, inserted or terminated (deleted). However, as Siebel is the data master, it is still a one-way synchronization. Handle deleted or nullified information by terminating them in Fusion CRM (set start and end date to define the validity period) Initial load and real-time synchronization use the same processes Invocations/Operations can be repeated due to no transactional support from Fusion web services Tagging sub entries in case of 1 to N mapping (Example: Telephone number is one simple field in Siebel but in Fusion you can have multiple telephone numbers in a sub table) E-Mail-Notification in case of any error (containing error message, instance number, detailed payload) Schematron Validation Interested? Looking for more details or a partnership with ec4u for a "Siebel2FusionCRM Integration" project? Contact: Gregor Bublitz, Director Expert Services ([email protected])

  Read the article

• SOA Starting Point: Methods for Service Identification and Definition

  As more and more companies start to incorporate a Service Oriented Architectural design approach into their existing enterprise systems, it creates the need for a standardized integration technology. One common technology used by companies is an Enterprise Service Bus (ESB). An ESB, as defined by Progress Software, connects and mediates all communications and interactions between services. In essence an ESB is a form of middleware that allows services to communicate with one another regardless of framework, environment, or location. With the emergence of ESB, a new emphasis is now being placed on approaches that can be used to determine what Web services should be built. In addition, what order should these services be built? In May 2011, SOA Magazine published an article that identified 10 common methods for identifying and defining services. SOA’s Ten Common Methods for Service Identification and Definition: Business Process Decomposition Business Functions Business Entity Objects Ownership and Responsibility Goal-Driven Component-Based Existing Supply (Bottom-Up) Front-Office Application Usage Analysis Infrastructure Non-Functional Requirements  Each of these methods provides various pros and cons in regards to their use within the design process. I personally feel that during a design process, multiple methodologies should be used in order to accurately define a design for a system or enterprise system. Personally, I like to create a custom cocktail derived from combining these methodologies in order to ensure that my design fits with the project’s and business’s needs while still following development standards and guidelines. Of these ten methods, I am particularly fond of Business Process Decomposition, Business Functions, Goal-Driven, Component-Based, and routinely use them in my designs.  Works Cited Hubbers, J.-W., Ligthart, A., & Terlouw , L. (2007, 12 10). Ten Ways to Identify Services. Retrieved from SOA Magazine: http://www.soamag.com/I13/1207-1.php Progress.com. (2011, 10 30). ESB ARCHITECTURE AND LIFECYCLE DEFINITION. Retrieved from Progress.com: http://web.progress.com/en/esb-architecture-lifecycle-definition.html

  Read the article

< Previous Page | 733 734 735 736 737 738 739 740 741 742 743 744  | Next Page >