Search Results

Search found 3690 results on 148 pages for 'apt mirror'.

Page 74/148 | < Previous Page | 70 71 72 73 74 75 76 77 78 79 80 81  | Next Page >

  • How to fix Ubuntu 12.04.3 boot to black screen full of errors in white text, after upgrading on dell inspiron 1501

    - by Ibuntu
    I am running a Dell Inspiron 1501 I use Linux only. No Microsoft or Apple operating systems (or really anything closed-source). I've only been using Linux for a little over a year but I'm starting to gain a comfortable level of familiarity with the system and terminology. I've been having some issues with Quantel Quetzal and Raring Ringtail, especially with older hardware, so I opted to install Ubuntu 12.04.3 Precise Pangolin on the Inspiron 1501. I checked my MD5 sum after downloading my ISO and all was good. I have in fact used this iso/dvd to install Precise Pangolin successfully on a few other systems (some of which are even older than this laptop). Install goes fine. The wireless card doesn't work out of the box but this is a known issue which is fairly easy to fix. So, first thing I did was open up a terminal and run sudo apt-get update && sudo apt-get upgrade which, part way through, crashed (I assume lightdm and possibly X) and took me to a black screen filled with white lines of text that were either errors or just the ouputs of commands. The reason I say that is because I was unable to gleam any useful information from the output on the screen. I did take a picture however and will post a link. After that, every time I boot the system it goes right to that black screen posting all the error messages or output in white text. I never get a purple Ubuntu splash, so from what I can tell after reading this wiki article: https://wiki.ubuntu.com/X/Troubleshooting/BlankScreen That means that after the kernel is selected, it is unable to correctly implement the settings it needs. If the purple splash never shows, the frame buffer was never set correctly right? This leads me to believe that it could be a kernel issue? The wiki suggested to try and pinpoint the issue by rolling back kernels until I find one that works. Is this my best option? I think I'm going to give it a try anyways and will let everyone know if I am able to solve the issue this way. I have since done a few reinstalls and some trouble-shooting including a couple hours scouring the net for anyone with any kind of similar issue. Most of the issues I could find involved getting a black screen after login and none of them said anything about any information output on this black screen. My reinstalls have taught me that there is no issue updating, but as soon as I run sudo apt-get upgrade my system goes to the black screen and every time I boot it up it does the same thing. The only way to fix is by reinstall. I never get any ability to log in. After a hard power off to the laptop (because I cannot use ctrl+alt+del to reboot) when it boots again it goes to the grub boot menu and I can select between regular boot, recovery mode and the two memtest options. I never tried the memtest options but the other two both lead to the same black screen. Some people having a black/blank screen issue claim to have fixed it by using 12.10 or 13.04 but I believe they were having a different issue where they got a black/blank screen after logging in. I think I will still give these images a try, but mostly figured I would just wait another day or two for 13.10. Other things I figured I would try from the following three articles: After logging in, there's a black screen and my cursor, nothing else! in Ubuntu 12.10 Black Screen on Login After Upgrading to 12.04 I can't get to the login screen include opening a terminal using ctrl+alt+f1 and trying a variety of reseting unity, x settings, lightdm (or switching to gdm); but I doubt this will work or that I will even be able to access a terminal. I'm pretty sure the whole system is stuck after it loads the last line on the black screen. I will try these things and post more information when I have. Hopefully someone has an idea in the meantime and I will keep checking back trying to find a solution. Thank you. Here are 3 different pictures of the error message. I had to take with my phone: http://ubuntuone.com/album/0TBBkxmVajJIQQtoN9mVdN

    Read the article

  • Display resolution in duplicate monitor

    - by Taher
    I use duplicate one monitor laptop LCD and other monitor that monitor resolution is bigger than laptop LCD how can i set laptop LCD resolution for them? when i use mirror button it set 1024 * 768 but my laptop LCD resolution is 1366 * 768 how can i set this resolution for them? because when i set this resolution i get error. My laptop is hp dv6 6080 and vga is intel sandy bridge if i change to AMD vga can i resolve this problem?

    Read the article

  • Linux ? ZFS ????????

    - by katsumii
    PR????????????????????????  @IT Special PR:???.com?VPS???! ZFS on Linux?????????ZFS???????????????????????????????????????5 ???Java????????????PC??ZFS????????????? Solaris and OS X (James Gosling: on the Java Road)when I get back to my desk and the USB drive reconnects, ZFS magically updates the mirror and I have an incredibly fast backup. If I want to use backups for going back in time, ZFS snapshots are perfect and fast.???????????VPS?????ISO????????????????????Oracle Linux???????????? Solaris ?????????? 

    Read the article

  • Second Monitor Unable to Display at any Resolution

    - by Ryan Sharp
    After connecting the second monitor, the only way to get it to work is with 'mirror', which isn't what I want it for. If I select a display resolution for it, I get the following error: requested position/size for CRTC 148 is outside the allowed limit: position=(1908, 0), size=(1024, 768), maximum=(1920, 1920) I'm on 12.04, with AMD HD Radeon 6950, Post-update drivers. I appreciate anybodies help with this. Thanks.

    Read the article

  • How to get robocopy running in powershell?

    - by Mark Allison
    Hi, I'm trying to use robocopy inside powershell to mirror some directories on my home machines. Here's my script: param ($configFile) $config = Import-Csv $configFile $what = "/COPYALL /B /SEC/ /MIR" $options = "/R:0 /W:0 /NFL /NDL" $logDir = "C:\Backup\" foreach ($line in $config) { $source = $($line.SourceFolder) $dest = $($line.DestFolder) $logfile = $logDIr $logfile += Split-Path $dest -Leaf $logfile += ".log" robocopy "$source $dest $what $options /LOG:MyLogfile.txt" } The script takes in a csv file with a list of source and destination directories. When I run the script I get these errors: ------------------------------------------------------------------------------- ROBOCOPY :: Robust File Copy for Windows ------------------------------------------------------------------------------- Started : Sat Apr 03 21:26:57 2010 Source : P:\ C:\Backup\Photos \COPYALL \B \SEC\ \MIR \R:0 \W:0 \NFL \NDL \LOG:MyLogfile.txt\ Dest - Files : *.* Options : *.* /COPY:DAT /R:1000000 /W:30 ------------------------------------------------------------------------------ ERROR : No Destination Directory Specified. Simple Usage :: ROBOCOPY source destination /MIR source :: Source Directory (drive:\path or \\server\share\path). destination :: Destination Dir (drive:\path or \\server\share\path). /MIR :: Mirror a complete directory tree. For more usage information run ROBOCOPY /? **** /MIR can DELETE files as well as copy them ! Any idea what I need to do to fix? Thanks, Mark.

    Read the article

  • ldap_modify: Insufficient access (50)

    - by Lynn Owens
    I am running an OpenLDAP 2.4 server that uses the SSL service for communication. It works for lookups. I am trying to add mirror mode replication. So this is the command that I'm executing: ldapmodify -D "cn=myuser,dc=mydomain,dc=com" -H ldaps://myloadbalancer -W -f /etc/ldap/ldif/server_id.ldif Where this is my server_id.ldif: dn: cn=config changetype: modify replace: olcServerID olcServerID: 1 myserver1 olcServerID: 2 myserver2 and this is my cn\=config.ldif in the slapd.d tree of text files: dn: cn=config objectClass: olcGlobal cn: config olcArgsFile: /var/run/slapd/slapd.args olcPidFile: /var/run/slapd/slapd.pid olcToolThreads: 1 structuralObjectClass: olcGlobal entryUUID: ff9689de-c61d-1031-880b-c3eb45d66183 creatorsName: cn=config createTimestamp: 20121118224947Z olcLogLevel: stats olcTLSCertificateFile: /etc/ldap/certs/ldapscert.pem olcTLSCertificateKeyFile: /etc/ldap/certs/ldapskey.pem olcTLSCACertificateFile: /etc/ldap/certs/ldapscert.pem olcTLSVerifyClient: never entryCSN: 20121119022009.770692Z#000000#000#000000 modifiersName: gidNumber=0+uidNumber=0,cn=peercred,cn=external,cn=auth modifyTimestamp: 20121119022009Z But unfortunately I'm getting this: Enter LDAP Password: modifying entry "cn=config" ldap_modify: Insufficient access (50) If I try to specify the config database I get this: ldapmodify -H 'ldaps://myloadbalancer/cn=config' -D "cn=myuser,cn=config" -W -f ./server_id.ldif Enter LDAP Password: ldap_bind: Invalid credentials (49)} Does anyone know how I can add the serverID to the config database so that I can complete the setup of mirror mode?

    Read the article

  • nginx reload failing: `object version does not match bootstrap parameter`

    - by Jean Jordaan
    I added a server stanza to my virtual.conf, and now nginx seems to have a problem reloading the config. At this point I don't know what exactly is going wrong or how to debug better. Any help would be most appreciated. The config test succeeds: root@server:~# service nginx configtest nginx: the configuration file /etc/nginx/nginx.conf syntax is ok nginx: configuration file /etc/nginx/nginx.conf test is successful I'm tailing the logfile. Upon reload, the following error is logged. As far as I can see, the new config is not used. root@server:~# service nginx reload Reloading nginx: [ OK ] root@server:~# ==> /var/log/nginx/error.log <== nginx object version 0.8.54 does not match bootstrap parameter 1.0.15 at /usr/lib64/perl5/XSLoader.pm line 94. Compilation failed in require. BEGIN failed--compilation aborted. 2012/10/18 12:31:07 [alert] 9620#0: perl_parse() failed: 2 This is the version of nginx I'm running: root@server:~# yum info nginx Loaded plugins: fastestmirror, presto Loading mirror speeds from cached hostfile * base: ftp.udc.es * epel: mirror.nl.leaseweb.net * extras: ftp.udc.es * updates: ftp.cica.es Installed Packages Name : nginx Arch : x86_64 Version : 1.0.15 Release : 2.el6 [...] Server OS: CentOS release 6.3 (Final)

    Read the article

  • RoboCopy fails with "the specified network name is no longer available"

    - by Justin Scott
    We have a scheduled task that runs robocopy periodically to mirror a rather large folder structure from one server to another (thousands of folders, 100,000+ files, 50+ GB in size). There is a share on the receiving server where the mirror gets stored. We're running the task from the origin server connecting out to the share on the receiving end. Both servers run Windows Server 2003 and are connected to the same network switch (100Mbps). The process will sometimes complete all the way through without error. More often than not, however, at some point during the process (seems random as to where), robocopy will fail with the error The specified network name is no longer available. It will wait 30 seconds and try the file again and eventually give up after a number of retries. Process will repeat at the next schedule interval and may complete... or not. When this occurs I am not able to access the share at all on the destination server from anywhere on the network for up to 30 minutes. There is nothing else on the network using this share. My question is what does this error mean specifically? Why is the share "dropping off" and becoming inaccessible? Is there a way to prevent it and get the file mirroring to be more stable?

    Read the article

  • Is it possible to shrink the size of an HP Smart Array logical drive?

    - by ewwhite
    I know extension is quite possible using the hpacucli utility, but is there an easy way to reduce the size of an existing logical drive (not array)? The controller is a P410i in a ProLiant DL360 G6 server. I'd like to reduce logicaldrive 1 from 72GB to 40GB. => ctrl all show config detail Smart Array P410i in Slot 0 (Embedded) Bus Interface: PCI Slot: 0 Serial Number: 5001438006FD9A50 Cache Serial Number: PAAVP9VYFB8Y RAID 6 (ADG) Status: Disabled Controller Status: OK Chassis Slot: Hardware Revision: Rev C Firmware Version: 3.66 Rebuild Priority: Medium Expand Priority: Medium Surface Scan Delay: 3 secs Surface Scan Mode: Idle Queue Depth: Automatic Monitor and Performance Delay: 60 min Elevator Sort: Enabled Degraded Performance Optimization: Disabled Inconsistency Repair Policy: Disabled Wait for Cache Room: Disabled Surface Analysis Inconsistency Notification: Disabled Post Prompt Timeout: 15 secs Cache Board Present: True Cache Status: OK Accelerator Ratio: 25% Read / 75% Write Drive Write Cache: Enabled Total Cache Size: 512 MB No-Battery Write Cache: Disabled Cache Backup Power Source: Batteries Battery/Capacitor Count: 1 Battery/Capacitor Status: OK SATA NCQ Supported: True Array: A Interface Type: SAS Unused Space: 412476 MB Status: OK Logical Drive: 1 Size: 72.0 GB Fault Tolerance: RAID 1+0 Heads: 255 Sectors Per Track: 32 Cylinders: 18504 Strip Size: 256 KB Status: OK Array Accelerator: Enabled Unique Identifier: 600508B1001C132E4BBDFAA6DAD13DA3 Disk Name: /dev/cciss/c0d0 Mount Points: /boot 196 MB, / 12.0 GB, /usr 8.0 GB, /var 4.0 GB, /tmp 2.0 GB OS Status: LOCKED Logical Drive Label: AE438D6A5001438006FD9A50BE0A Mirror Group 0: physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS, 146 GB, OK) physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS, 146 GB, OK) Mirror Group 1: physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SAS, 146 GB, OK) physicaldrive 1I:1:4 (port 1I:box 1:bay 4, SAS, 146 GB, OK) SEP (Vendor ID PMCSIERA, Model SRC 8x6G) 250 Device Number: 250 Firmware Version: RevC WWID: 5001438006FD9A5F Vendor ID: PMCSIERA Model: SRC 8x6G

    Read the article

  • CENTOS 6 - How to install php-mysql when php-common @remi is present?

    - by Multitut
    I am having troubles adding mysql support for my php installation, this installation was made using a ready to use-package that came with our VPS. This is my php.info: http://snake.quetzalcoatech.com/info.php I am trying to install php mysql using: yum install php-mysql And get this output: Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * base: mirrors.serveraxis.net * extras: mirror.fdcservers.net * updates: bay.uchicago.edu Setting up Install Process Resolving Dependencies --> Running transaction check ---> Package php-mysql.x86_64 0:5.3.3-14.el6_3 will be installed --> Processing Dependency: php-common = 5.3.3-14.el6_3 for package: php-mysql-5.3.3-14.el6_3.x86_64 --> Finished Dependency Resolution Error: Package: php-mysql-5.3.3-14.el6_3.x86_64 (updates) Requires: php-common = 5.3.3-14.el6_3 Installed: php-common-5.3.17-2.el6.remi.x86_64 (@remi) php-common = 5.3.17-2.el6.remi Available: php-common-5.3.3-3.el6_2.8.x86_64 (base) php-common = 5.3.3-3.el6_2.8 Available: php-common-5.3.3-14.el6_3.x86_64 (updates) php-common = 5.3.3-14.el6_3 You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofiles --nodigest I am a noob using Linux, so could you tell me which command should I use to install a compatible php-mysql module? Thank you so much!

    Read the article

  • What can I do to lower bandwidth cost on a bandwidth heavy site?

    - by acidzombie24
    The easiest answer is CDN but I'd like to ask. A friend of mine has a server that is used for mirror downloads. He says he is doing about 10TB of bandwidth a month which shocked me (I wonder if he is lying). I seen his site and he has no ads. I suspect he might close his website once he gets the bill. Anyways I was wondering since his CPU/RAM is not being used and his HD usage is around 15gb what he can do to lower cost if he continues this site. I said put up ads but I don't know if ads would cover it I found one CDN which offers $0.070 / GB. 10240gb (10TB) * .07 = $717 a month. That seems a little steep but he is using lots of traffic due to it being a mirror site. Also using a CDN doesnt make sense as he doesn't need multiple servers hosting the files in different areas (which is one reason he isn't using that now). He just needs a big upload pipe Is there something he can do? At the moment he is paying $200 a month on a dedicated server and he is using WAY more bandwidth then he should be using. Side question: Can gz-ing files large already compressed files help? like on (zip, rars, etc)

    Read the article

  • How to get robocopy running in powershell?

    - by Moo MinTroll
    I'm trying to use robocopy inside powershell to mirror some directories on my home machines. Here's my script: param ($configFile) $config = Import-Csv $configFile $what = "/COPYALL /B /SEC/ /MIR" $options = "/R:0 /W:0 /NFL /NDL" $logDir = "C:\Backup\" foreach ($line in $config) { $source = $($line.SourceFolder) $dest = $($line.DestFolder) $logfile = $logDIr $logfile += Split-Path $dest -Leaf $logfile += ".log" robocopy "$source $dest $what $options /LOG:MyLogfile.txt" } The script takes in a csv file with a list of source and destination directories. When I run the script I get these errors: ------------------------------------------------------------------------------- ROBOCOPY :: Robust File Copy for Windows ------------------------------------------------------------------------------- Started : Sat Apr 03 21:26:57 2010 Source : P:\ C:\Backup\Photos \COPYALL \B \SEC\ \MIR \R:0 \W:0 \NFL \NDL \LOG:MyLogfile.txt\ Dest - Files : *.* Options : *.* /COPY:DAT /R:1000000 /W:30 ------------------------------------------------------------------------------ ERROR : No Destination Directory Specified. Simple Usage :: ROBOCOPY source destination /MIR source :: Source Directory (drive:\path or \\server\share\path). destination :: Destination Dir (drive:\path or \\server\share\path). /MIR :: Mirror a complete directory tree. For more usage information run ROBOCOPY /? **** /MIR can DELETE files as well as copy them ! Any idea what I need to do to fix? Thanks, Mark.

    Read the article

  • Resize a RAID 1 volume on OSX Snow Leopard - how? (Note: software raid)

    - by Emmel
    I've scoured the Internet in search of an answer to this question, and as usual with OSX-related topics, I often don't find any deep-dive technical explanations sufficient enough to feel confident doing dangerous things. Here is my question: I have a Mac Pro, running OSX 10.6.2. I have, as my main root/boot disk, a RAID 1 volume called "Mirror1". Mirror1 is comprised of two 1 TB disks. Mirror1, however, is fixed at 640 GB. That's because, I originally took a 640GB disk, bought a terabyte disk, mirrored it (using diskutil appleraid enable...), when it synced I removed the 640GB and replaced it with a second 1 TB disk, and synced again. Voila! A single 640 GB replaced by two 1 TB disks in a mirror.. Actually, no. There's still something missing from the equation: Mirror1 needs to be expanded from 640GB to 1 TB to match the partition sizes on each of those disks. How do I do this? Perhaps the diskutil output will help: -> diskutil list /dev/disk0 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *1.0 TB disk0 1: EFI 209.7 MB disk0s1 2: Apple_RAID 999.9 GB disk0s2 3: Apple_Boot Boot OSX 134.2 MB disk0s3 /dev/disk1 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *1.0 TB disk1 1: EFI 209.7 MB disk1s1 2: Apple_RAID 999.9 GB disk1s2 3: Apple_Boot Boot OSX 134.2 MB disk1s3 /dev/disk2 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *640.1 GB disk2 1: EFI 209.7 MB disk2s1 2: Apple_HFS Mac Disk 2 536.7 GB disk2s2 3: Microsoft Basic Data BOOTCAMP 103.1 GB disk2s3 /dev/disk3 #: TYPE NAME SIZE IDENTIFIER 0: Apple_HFS Mirror1 *639.8 GB disk3 -> diskutil appleraid list AppleRAID sets (1 found) =============================================================================== Name: Macintosh HD Unique ID: 1953F864-B474-4EB6-8E69-41834EBD0247 Type: Mirror Status: Online Size: 639.8 GB (639791038464 Bytes) Rebuild: manual Device Node: disk3 ------------------------------------------------------------------------------- # Device Node UUID Status ------------------------------------------------------------------------------- 0 disk1s2 25109BAE-5697-40EA-B612-0217851444F7 Online 1 disk0s2 11B83AB0-8148-4DB6-8761-DEF08C855F8D Online =============================================================================== Thanks in advance.

    Read the article

  • How to configure SCSI hard drives and RAID for Poweredge 2850 web server

    - by Saul
    I'm trying to set up a Poweredge 2850 as a web server, but as a server novice it's causing me some confusion. Its a virgin install so no data to be lost as yet, so I'd like to get the best arrangement for setting up Windows Server 2008. The box will run IIS, a mail and FTP server. The current physical arrangement of the hot swap drives is 1 73GB 3 146GB 5 blank 0 73GB 2 146GB 4 146GB (but flashes green, amber off) When I enter the PERC config screens on boot up I've got Raid Ch- 0 ID 0 ONLIN A00-00 1 ONLIN A00-01 2 ONLIN A01-00 3 ONLIN A01-01 4 HOTSP I think that drives 0 and 1 are set to RAID 1 and drives 2 and 3 are also set to RAID 1, certainly I can see 2 logical drives, both raid 1 of 69880MB and 139900MB Now what I think I am getting here is that the 2 73GB drives mirror each other and the 2 146GB drives mirror 2? so by my noob thinking if a drive fails I can pull it, insert and new one and it will reduplicate from its matching pair? I think the flashing amber probably indicates a failing drive in slot 4, should that just be binned? What confuses me coming from a home user XP background is that when I load up Windows Server 2008 OS under my computer I only see a C drive of about 70GB capacity. i.e wheres the 146GB drive? Any advice appreciated

    Read the article

  • How do I remove a USB drive's write protection?

    - by nate
    I have a SanDisk Cruser Blade USB stick that suddenly seems to be write protected. I tried running DiskPart but after I write the command "attributes disk clear readonly" it displays this: Microsoft DiskPart version 5.1.3565 ADD - Add a mirror to a simple volume. ACTIVE - Marks the current basic partition as an active boot partition. ASSIGN - Assign a drive letter or mount point to the selected volume. BREAK - Break a mirror set. CLEAN - Clear the configuration information, or all information, off the disk. CONVERT - Converts between different disk formats. CREATE - Create a volume or partition. DELETE - Delete an object. DETAIL - Provide details about an object. EXIT - Exit DiskPart EXTEND - Extend a volume. HELP - Prints a list of commands. IMPORT - Imports a disk group. LIST - Prints out a list of objects. INACTIVE - Marks the current basic partition as an inactive partition. ONLINE - Online a disk that is currently marked as offline. REM - Does nothing. Used to comment scripts. REMOVE - Remove a drive letter or mount point assignment. REPAIR - Repair a RAID-5 volume. RESCAN - Rescan the computer looking for disks and volumes. RETAIN - Place a retainer partition under a simple volume. SELECT - Move the focus to an object. It's like when you type help at the DiskPart prompt, so how do I get past this? This problem started when I plugged the stick into a laptop which had viruses, if that's any help.

    Read the article

  • CentOS 6 LEMP update - dependency error issue

    - by Latheesan Kanes
    I have setup a LEMP server following the guide Install Nginx/PHP-FPM on Fedora 20/19, CentOS/RHEL 6.5/5.10. It's been a while since I did the setup, so I wanted to grab the latest updates from REMI repository. I ran the following command: yum --enablerepo=remi,remi-php55 update I now get these dependency related errors: # yum --enablerepo=remi update Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * base: mirror.nl.leaseweb.net * epel: mirror.1000mbps.com * extras: mirror.nl.leaseweb.net * remi: remi.schlundtech.de * updates: centos.mirror1.spango.com Setting up Update Process Resolving Dependencies --> Running transaction check ---> Package chkconfig.x86_64 0:1.3.49.3-2.el6 will be updated ---> Package chkconfig.x86_64 0:1.3.49.3-2.el6_4.1 will be an update ---> Package glibc.x86_64 0:2.12-1.107.el6_4.4 will be updated ---> Package glibc.x86_64 0:2.12-1.107.el6_4.5 will be an update ---> Package glibc-common.x86_64 0:2.12-1.107.el6_4.4 will be updated ---> Package glibc-common.x86_64 0:2.12-1.107.el6_4.5 will be an update ---> Package gnupg2.x86_64 0:2.0.14-4.el6 will be updated ---> Package gnupg2.x86_64 0:2.0.14-6.el6_4 will be an update ---> Package iputils.x86_64 0:20071127-17.el6_4 will be updated ---> Package iputils.x86_64 0:20071127-17.el6_4.2 will be an update ---> Package kernel.x86_64 0:2.6.32-358.23.2.el6 will be installed ---> Package kernel-firmware.noarch 0:2.6.32-358.18.1.el6 will be updated ---> Package kernel-firmware.noarch 0:2.6.32-358.23.2.el6 will be an update ---> Package libgcrypt.x86_64 0:1.4.5-9.el6_2.2 will be updated ---> Package libgcrypt.x86_64 0:1.4.5-11.el6_4 will be an update ---> Package mysql-libs.x86_64 0:5.1.69-1.el6_4 will be updated --> Processing Dependency: libmysqlclient.so.16()(64bit) for package: 2:postfix-2.6.6-2.2.el6_1.x86_64 --> Processing Dependency: libmysqlclient.so.16(libmysqlclient_16)(64bit) for package: 2:postfix-2.6.6-2.2.el6_1.x86_64 ---> Package mysql-libs.x86_64 0:5.5.34-1.el6.remi will be an update ---> Package nginx.x86_64 0:1.4.2-1.el6.ngx will be updated ---> Package nginx.x86_64 0:1.4.3-1.el6.ngx will be an update ---> Package php-pear.noarch 1:1.9.4-20.el6.remi will be updated ---> Package php-pear.noarch 1:1.9.4-23.el6.remi will be an update ---> Package php-pecl-jsonc.x86_64 0:1.3.2-1.el6.remi.1 will be updated ---> Package php-pecl-jsonc.x86_64 0:1.3.2-2.el6.remi will be an update --> Processing Dependency: php(zend-abi) = 20100525-x86-64 for package: php-pecl-jsonc-1.3.2-2.el6.remi.x86_64 --> Processing Dependency: php(api) = 20100412-x86-64 for package: php-pecl-jsonc-1.3.2-2.el6.remi.x86_64 ---> Package php-pecl-mongo.x86_64 0:1.4.3-1.el6.remi.1 will be updated ---> Package php-pecl-mongo.x86_64 0:1.4.4-1.el6.remi will be an update --> Processing Dependency: php(zend-abi) = 20100525-x86-64 for package: php-pecl-mongo-1.4.4-1.el6.remi.x86_64 --> Processing Dependency: php(api) = 20100412-x86-64 for package: php-pecl-mongo-1.4.4-1.el6.remi.x86_64 ---> Package php-pecl-sqlite.x86_64 0:2.0.0-0.3.svn313074.el6.remi.5 will be updated ---> Package php-pecl-sqlite.x86_64 0:2.0.0-0.4.svn332053.el6.remi.5.4 will be an update --> Processing Dependency: php(zend-abi) = 20100525-x86-64 for package: php-pecl-sqlite-2.0.0-0.4.svn332053.el6.remi.5.4.x86_64 --> Processing Dependency: php(api) = 20100412-x86-64 for package: php-pecl-sqlite-2.0.0-0.4.svn332053.el6.remi.5.4.x86_64 ---> Package postgresql-libs.x86_64 0:8.4.13-1.el6_3 will be updated ---> Package postgresql-libs.x86_64 0:8.4.18-1.el6_4 will be an update ---> Package remi-release.noarch 0:6-2.el6.remi will be updated ---> Package remi-release.noarch 0:6.4-1.el6.remi will be an update ---> Package rsync.x86_64 0:3.0.6-9.el6 will be updated ---> Package rsync.x86_64 0:3.0.6-9.el6_4.1 will be an update ---> Package selinux-policy.noarch 0:3.7.19-195.el6_4.12 will be updated ---> Package selinux-policy.noarch 0:3.7.19-195.el6_4.18 will be an update ---> Package selinux-policy-targeted.noarch 0:3.7.19-195.el6_4.12 will be updated ---> Package selinux-policy-targeted.noarch 0:3.7.19-195.el6_4.18 will be an update ---> Package setup.noarch 0:2.8.14-20.el6 will be updated ---> Package setup.noarch 0:2.8.14-20.el6_4.1 will be an update ---> Package tzdata.noarch 0:2013c-2.el6 will be updated ---> Package tzdata.noarch 0:2013g-1.el6 will be an update ---> Package xinetd.x86_64 2:2.3.14-38.el6 will be updated ---> Package xinetd.x86_64 2:2.3.14-39.el6_4 will be an update --> Running transaction check ---> Package compat-mysql51.x86_64 0:5.1.54-1.el6.remi will be installed ---> Package php-pecl-jsonc.x86_64 0:1.3.2-2.el6.remi will be an update --> Processing Dependency: php(zend-abi) = 20100525-x86-64 for package: php-pecl-jsonc-1.3.2-2.el6.remi.x86_64 --> Processing Dependency: php(api) = 20100412-x86-64 for package: php-pecl-jsonc-1.3.2-2.el6.remi.x86_64 ---> Package php-pecl-mongo.x86_64 0:1.4.4-1.el6.remi will be an update --> Processing Dependency: php(zend-abi) = 20100525-x86-64 for package: php-pecl-mongo-1.4.4-1.el6.remi.x86_64 --> Processing Dependency: php(api) = 20100412-x86-64 for package: php-pecl-mongo-1.4.4-1.el6.remi.x86_64 ---> Package php-pecl-sqlite.x86_64 0:2.0.0-0.4.svn332053.el6.remi.5.4 will be an update --> Processing Dependency: php(zend-abi) = 20100525-x86-64 for package: php-pecl-sqlite-2.0.0-0.4.svn332053.el6.remi.5.4.x86_64 --> Processing Dependency: php(api) = 20100412-x86-64 for package: php-pecl-sqlite-2.0.0-0.4.svn332053.el6.remi.5.4.x86_64 --> Finished Dependency Resolution Error: Package: php-pecl-jsonc-1.3.2-2.el6.remi.x86_64 (remi) Requires: php(zend-abi) = 20100525-x86-64 Installed: php-common-5.5.4-1.el6.remi.x86_64 (@remi-test) php(zend-abi) = 20121212-64 Available: php-common-5.3.3-22.el6.x86_64 (base) php(zend-abi) = 20090626 Available: php-common-5.3.3-23.el6_4.x86_64 (updates) php(zend-abi) = 20090626 Available: php-common-5.4.21-1.el6.remi.x86_64 (remi) php(zend-abi) = 20100525-x86-64 Available: php-common-5.4.21-2.el6.remi.x86_64 (remi) php(zend-abi) = 20100525-x86-64 Error: Package: php-pecl-mongo-1.4.4-1.el6.remi.x86_64 (remi) Requires: php(zend-abi) = 20100525-x86-64 Installed: php-common-5.5.4-1.el6.remi.x86_64 (@remi-test) php(zend-abi) = 20121212-64 Available: php-common-5.3.3-22.el6.x86_64 (base) php(zend-abi) = 20090626 Available: php-common-5.3.3-23.el6_4.x86_64 (updates) php(zend-abi) = 20090626 Available: php-common-5.4.21-1.el6.remi.x86_64 (remi) php(zend-abi) = 20100525-x86-64 Available: php-common-5.4.21-2.el6.remi.x86_64 (remi) php(zend-abi) = 20100525-x86-64 Error: Package: php-pecl-jsonc-1.3.2-2.el6.remi.x86_64 (remi) Requires: php(api) = 20100412-x86-64 Installed: php-common-5.5.4-1.el6.remi.x86_64 (@remi-test) php(api) = 20121113-64 Available: php-common-5.3.3-22.el6.x86_64 (base) php(api) = 20090626 Available: php-common-5.3.3-23.el6_4.x86_64 (updates) php(api) = 20090626 Available: php-common-5.4.21-1.el6.remi.x86_64 (remi) php(api) = 20100412-x86-64 Available: php-common-5.4.21-2.el6.remi.x86_64 (remi) php(api) = 20100412-x86-64 Error: Package: php-pecl-sqlite-2.0.0-0.4.svn332053.el6.remi.5.4.x86_64 (remi) Requires: php(zend-abi) = 20100525-x86-64 Installed: php-common-5.5.4-1.el6.remi.x86_64 (@remi-test) php(zend-abi) = 20121212-64 Available: php-common-5.3.3-22.el6.x86_64 (base) php(zend-abi) = 20090626 Available: php-common-5.3.3-23.el6_4.x86_64 (updates) php(zend-abi) = 20090626 Available: php-common-5.4.21-1.el6.remi.x86_64 (remi) php(zend-abi) = 20100525-x86-64 Available: php-common-5.4.21-2.el6.remi.x86_64 (remi) php(zend-abi) = 20100525-x86-64 Error: Package: php-pecl-mongo-1.4.4-1.el6.remi.x86_64 (remi) Requires: php(api) = 20100412-x86-64 Installed: php-common-5.5.4-1.el6.remi.x86_64 (@remi-test) php(api) = 20121113-64 Available: php-common-5.3.3-22.el6.x86_64 (base) php(api) = 20090626 Available: php-common-5.3.3-23.el6_4.x86_64 (updates) php(api) = 20090626 Available: php-common-5.4.21-1.el6.remi.x86_64 (remi) php(api) = 20100412-x86-64 Available: php-common-5.4.21-2.el6.remi.x86_64 (remi) php(api) = 20100412-x86-64 Error: Package: php-pecl-sqlite-2.0.0-0.4.svn332053.el6.remi.5.4.x86_64 (remi) Requires: php(api) = 20100412-x86-64 Installed: php-common-5.5.4-1.el6.remi.x86_64 (@remi-test) php(api) = 20121113-64 Available: php-common-5.3.3-22.el6.x86_64 (base) php(api) = 20090626 Available: php-common-5.3.3-23.el6_4.x86_64 (updates) php(api) = 20090626 Available: php-common-5.4.21-1.el6.remi.x86_64 (remi) php(api) = 20100412-x86-64 Available: php-common-5.4.21-2.el6.remi.x86_64 (remi) php(api) = 20100412-x86-64 You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofiles --nodigest Any idea how to solve these errors? Am I missing a package? or is this a bug?

    Read the article

  • SQL Server Database In Single User Mode after Failover

    - by jlichauc
    Here is a weird situation we experienced with a SQL Server 2008 Database Mirroring Failover. We have a pair of mirrored databases running in high-availability mode and both the principal and mirror showed as synchronized. As part of some maintenance I triggered a manual failover of the principal to the mirror. However after the failover the principal was now in single-user mode instead of the expected "Principal/Synchronized" state we usually get. The database had been in multi-user mode on the previous principal before this had happened. We ended up stopping all applications, restarting the SQL Server instances, and executing "ALTER DATABASE ... SET MULTI_USER" to bring the database back to the expected "Principal/Synchronized" state in a multi-user mode. Question. Does anyone know where SQL Server stores information about whether a database should be in single-user mode or not? I'm wondering if there is some system database or table that has this setting recorded somewhere. In particular we had an incident once with the database on the original principal (the one I was failing over to) where when trying to detach the database it was put into single-user mode. I'm wondering if that setting is cached somewhere and is the reason that SQL Server put it back into single-user mode after a failover.

    Read the article

  • Resize a RAID 1 volume on OS X Snow Leopard - how? (Note: software raid)

    - by Emmel
    I've scoured the Internet in search of an answer to this question, and as usual with OSX-related topics, I often don't find any deep-dive technical explanations sufficient enough to feel confident doing dangerous things. Here is my question: I have a Mac Pro, running OS X 10.6.2. I have, as my main root/boot disk, a RAID 1 volume called "Mirror1". Mirror1 is comprised of two 1 TB disks. Mirror1, however, is fixed at 640 GB. That's because, I originally took a 640GB disk, bought a terabyte disk, mirrored it (using diskutil appleraid enable), when it synced I removed the 640GB and replaced it with a second 1 TB disk, and synced again. Voila! A single 640 GB replaced by two 1 TB disks in a mirror.. Actually, no. There's still something missing from the equation: Mirror1 needs to be expanded from 640GB to 1 TB to match the partition sizes on each of those disks. How do I do this? Perhaps the diskutil output will help: -> diskutil list /dev/disk0 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *1.0 TB disk0 1: EFI 209.7 MB disk0s1 2: Apple_RAID 999.9 GB disk0s2 3: Apple_Boot Boot OSX 134.2 MB disk0s3 /dev/disk1 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *1.0 TB disk1 1: EFI 209.7 MB disk1s1 2: Apple_RAID 999.9 GB disk1s2 3: Apple_Boot Boot OSX 134.2 MB disk1s3 /dev/disk2 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *640.1 GB disk2 1: EFI 209.7 MB disk2s1 2: Apple_HFS Mac Disk 2 536.7 GB disk2s2 3: Microsoft Basic Data BOOTCAMP 103.1 GB disk2s3 /dev/disk3 #: TYPE NAME SIZE IDENTIFIER 0: Apple_HFS Mirror1 *639.8 GB disk3 -> diskutil appleraid list AppleRAID sets (1 found) =============================================================================== Name: Macintosh HD Unique ID: 1953F864-B474-4EB6-8E69-41834EBD0247 Type: Mirror Status: Online Size: 639.8 GB (639791038464 Bytes) Rebuild: manual Device Node: disk3 ------------------------------------------------------------------------------- # Device Node UUID Status ------------------------------------------------------------------------------- 0 disk1s2 25109BAE-5697-40EA-B612-0217851444F7 Online 1 disk0s2 11B83AB0-8148-4DB6-8761-DEF08C855F8D Online =============================================================================== Thanks in advance.

    Read the article

  • Resize a RAID 1 volume on OS X Snow Leopard - how? (Note: software raid)

    - by Emmel
    I've scoured the Internet in search of an answer to this question, and as usual with OSX-related topics, I often don't find any deep-dive technical explanations sufficient enough to feel confident doing dangerous things. Here is my question: I have a Mac Pro, running OS X 10.6.2. I have, as my main root/boot disk, a RAID 1 volume called "Mirror1". Mirror1 is comprised of two 1 TB disks. Mirror1, however, is fixed at 640 GB. That's because, I originally took a 640GB disk, bought a terabyte disk, mirrored it (using diskutil appleraid enable), when it synced I removed the 640GB and replaced it with a second 1 TB disk, and synced again. Voila! A single 640 GB replaced by two 1 TB disks in a mirror.. Actually, no. There's still something missing from the equation: Mirror1 needs to be expanded from 640GB to 1 TB to match the partition sizes on each of those disks. How do I do this? Perhaps the diskutil output will help: -> diskutil list /dev/disk0 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *1.0 TB disk0 1: EFI 209.7 MB disk0s1 2: Apple_RAID 999.9 GB disk0s2 3: Apple_Boot Boot OSX 134.2 MB disk0s3 /dev/disk1 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *1.0 TB disk1 1: EFI 209.7 MB disk1s1 2: Apple_RAID 999.9 GB disk1s2 3: Apple_Boot Boot OSX 134.2 MB disk1s3 /dev/disk2 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *640.1 GB disk2 1: EFI 209.7 MB disk2s1 2: Apple_HFS Mac Disk 2 536.7 GB disk2s2 3: Microsoft Basic Data BOOTCAMP 103.1 GB disk2s3 /dev/disk3 #: TYPE NAME SIZE IDENTIFIER 0: Apple_HFS Mirror1 *639.8 GB disk3 -> diskutil appleraid list AppleRAID sets (1 found) =============================================================================== Name: Macintosh HD Unique ID: 1953F864-B474-4EB6-8E69-41834EBD0247 Type: Mirror Status: Online Size: 639.8 GB (639791038464 Bytes) Rebuild: manual Device Node: disk3 ------------------------------------------------------------------------------- # Device Node UUID Status ------------------------------------------------------------------------------- 0 disk1s2 25109BAE-5697-40EA-B612-0217851444F7 Online 1 disk0s2 11B83AB0-8148-4DB6-8761-DEF08C855F8D Online =============================================================================== Thanks in advance.

    Read the article

  • How to make a Linux software RAID1 detect disc corruption?

    - by Paul
    This is one of the nightmare days: A virtualized server running on a Linux SW-RAID1 runs a VM that exhibits random segfaults in seemingly random codechunks. While debugging I find that a file gives different md5sums on each and every run. Digging deeper I find this: The raw disc partitions that make up the RAID1 mirror contain 2 bit-differences and ca. 9 sectors are completely empty on one disc and filled with data on the other disc. Obviously Linux gives back a sector from a undeterministically chosen disc of the mirror set. So sometimes the same sector is returned OK, sometimes the corrupted is given back. The docs say: RAID cannot and is not supposed to guard against data corruption on the media. Therefore, it doesn't make any sense either, to purposely corrupt data (using dd for example) on a disk to see how the RAID system will handle that. It is most likely (unless you corrupt the RAID superblock) that the RAID layer will never find out about the corruption, but your filesystem on the RAID device will be corrupted. Thanks. That will help me sleep. :-/ Is there a way to have Linux at least detect this corruption by using sector checksumming or something like that? Would this be detected in a RAID5 setup? Is this the moment I wish I used ZFS or btrfs (once it becomes usable without uber-admin capabilities)?

    Read the article

  • Win2008: Boot from mirrored dynamic disk fails!

    - by Daniel Marschall
    Hello. I am using Windows Server 2008 R2 Datacenter and I got two 1.5TB S-ATA2 hard disks installed and I want to make a soft raid. (I do know the disadvantages of softraid vs. hardraid) I have following partitions on Disk 0: (1) Microsoft Reserved 100 MB (dynamic), created during setup (2) System Partition 100 GB (dynamic) (3) Data partition, 1.2TB (dynamic) I already mirrored these contents to Disk 1. Its contents are: (1) System partition mirror, 100 GB (dynamic) (2) Data partition, 1.2 TB mirror (dynamic) (3) Unusued 100 MB (dynamic) -- is from "MSR" of Disk 0, created during setup. Since data and system partition are mirrored, I expect that my system works if disk 0 would fail. But it doesn't. If I force booting on disk 0: Works (I get the 2 bootloader screen) If I force booting on disk 1 (F8 for BBS), nothing happens. I got a blank black screen with the blinking caret. I already made disk1/partition1 active with diskpart, but it still does not boot from this drive. Please help. Both partitions are in "MBR" partition style. They look equal, except the missing "MSR" partition at the partition beginning (which seems to be not relevant to booting). Regards Daniel Marschall

    Read the article

  • How to connect a USB GDI printer to Linux over a D-Link print server?

    - by jpe
    The setup is the following: +------------+ +-----------------+ +---------+ | HP LJ P1005|--USB--| D-Link DPR-1020 |---LAN---| PC Linux| +------------+ +-----------------+ + +---------+ | +------------+ +--| PC Windows | +------------+ HP LJ P1005 is one of those GDI printers that requires the printer driver to do most of the work for it and therefore is a bit "special". D-Link DPR-1020 is a print server with an Ethernet and an USB port that actually supports printing to challenged (read GDI) printers using a utility called PS-Link. What the utility does is basically mirror a USB port over the network to the print server so that the printer driver and the printer both are happy to talk to each other. The PC-s are notebooks that come and go, i.e. are not there all the time. Is there an equivalent of the D-Link PS-Link utility for Linux that could mirror a USB port over the network for a Linux host? And can the solution be used with D-Link DPR-1020? If not then I basically wasted the money buying the print server because the goal was to share a small printer among a couple of users with diverse operating systems in an office. The print server specs say that it supports Linux and LJ P1005, but the Catch 22 appears to be the solution used for GDI printers... It should be noted that it is possible to print from Linux to LJ P1005 directly over USB. This far sharing involved reconnecting the USB cable to appropriate computer to print. Now one of the desks is separated, so the cable does not work. Searching the net did not yield anything useful. Please do not suggest solutions involving a Windows machine (either virtual or not), my question is whether a solution only involving a Linux machine exists.

    Read the article

  • Missing whole disk device in OpenSolaris

    - by Jeff Mc
    I have begun experimenting with Solaris and ZFS as a NAS. All was going very smoothly until I had a drive failure. When I replaced the drive, I no longer have a device file mapped to the whole disk. /dev/dsk/c7t3d0 does not exist but c7t2d0 and c7t4d0 both do. Also the sd@3,0:wd file under the /devices/ tree is non-existent. Do I have to prepare/partition the disk somehow to cause the whole disk device to exist? Here are a few outputs that might be useful. jeffmc@ats-ds2:/dev/dsk$ zpool status pool: datapool state: DEGRADED status: One or more devices could not be opened. Sufficient replicas exist for the pool to continue functioning in a degraded state. action: Attach the missing device and online it using 'zpool online'. see: http://www.sun.com/msg/ZFS-8000-2Q scrub: none requested config: NAME STATE READ WRITE CKSUM datapool DEGRADED 0 0 0 mirror-0 DEGRADED 0 0 0 c7t2d0 ONLINE 0 0 0 c7t3d0 UNAVAIL 0 0 0 cannot open mirror-1 ONLINE 0 0 0 c7t4d0 ONLINE 0 0 0 c7t5d0 ONLINE 0 0 0 jeffmc@ats-ds2:/dev/dsk$ zpool replace datapool c7t3d0 cannot open 'c7t3d0': no such device in /dev/dsk must be a full path or shorthand device name jeffmc@ats-ds2:/dev/dsk$ sudo format Searching for disks...done AVAILABLE DISK SELECTIONS: 0. c7t0d0 /pci@0,0/pci8086,3599@6/pci8086,330@0/pci1014,2cc@7,1/sd@0,0 1. c7t1d0 /pci@0,0/pci8086,3599@6/pci8086,330@0/pci1014,2cc@7,1/sd@1,0 2. c7t2d0 /pci@0,0/pci8086,3599@6/pci8086,330@0/pci1014,2cc@7,1/sd@2,0 3. c7t3d0 /pci@0,0/pci8086,3599@6/pci8086,330@0/pci1014,2cc@7,1/sd@3,0 4. c7t4d0 /pci@0,0/pci8086,3599@6/pci8086,330@0/pci1014,2cc@7,1/sd@4,0 5. c7t5d0 /pci@0,0/pci8086,3599@6/pci8086,330@0/pci1014,2cc@7,1/sd@5,0

    Read the article

  • Centos 6.2 postfix install dependency issues

    - by Mishari
    I am administrating a VPS running cPanel and I'm trying to install postfix. Redhat-release says the version is CentOS release 6.2 (Final) and uname -a says: Linux server.mydomain.com 2.6.32-220.el6.i686 #1 SMP Tue Dec 6 16:15:40 GMT 2011 i686 i686 i386 GNU/Linux This is how I'm installing postfix (I had tried to solve the problem earlier by installing epel). # yum install postfix Loaded plugins: fastestmirror, security Loading mirror speeds from cached hostfile * epel: mirror.cogentco.com Setting up Install Process Resolving Dependencies --> Running transaction check ---> Package postfix.i686 2:2.6.6-2.2.el6_1 will be installed --> Processing Dependency: mysql-libs for package: 2:postfix-2.6.6-2.2.el6_1.i686 --> Finished Dependency Resolution Error: Package: 2:postfix-2.6.6-2.2.el6_1.i686 (centos-burstnet) Requires: mysql-libs You could try using --skip-broken to work around the problem Attempts to install mysql-libs tells me several files conflict with "MySQL-server-5.1.61-0.glibc23.i386" I'm not sure why or how this is happening, does anyone know how to resolve this? Surely Centos 6.2 could not have shipped with a broken postfix.

    Read the article

  • Resize a RAID 1 volume on OSX Snow Leopard - how? (Note: software raid)

    - by Emmel
    I've scoured the Internet in search of an answer to this question, and as usual with OSX-related topics, I often don't find any deep-dive technical explanations sufficient enough to feel confident doing dangerous things. Here is my question: I have a Mac Pro, running OSX 10.6.2. I have, as my main root/boot disk, a RAID 1 volume called "Mirror1". Mirror1 is comprised of two 1 TB disks. Mirror1, however, is fixed at 640 GB. That's because, I originally took a 640GB disk, bought a terabyte disk, mirrored it (using diskutil appleraid enable...), when it synced I removed the 640GB and replaced it with a second 1 TB disk, and synced again. Voila! A single 640 GB replaced by two 1 TB disks in a mirror.. Actually, no. There's still something missing from the equation: Mirror1 needs to be expanded from 640GB to 1 TB to match the partition sizes on each of those disks. How do I do this? Perhaps the diskutil output will help: -> diskutil list /dev/disk0 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *1.0 TB disk0 1: EFI 209.7 MB disk0s1 2: Apple_RAID 999.9 GB disk0s2 3: Apple_Boot Boot OSX 134.2 MB disk0s3 /dev/disk1 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *1.0 TB disk1 1: EFI 209.7 MB disk1s1 2: Apple_RAID 999.9 GB disk1s2 3: Apple_Boot Boot OSX 134.2 MB disk1s3 /dev/disk2 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *640.1 GB disk2 1: EFI 209.7 MB disk2s1 2: Apple_HFS Mac Disk 2 536.7 GB disk2s2 3: Microsoft Basic Data BOOTCAMP 103.1 GB disk2s3 /dev/disk3 #: TYPE NAME SIZE IDENTIFIER 0: Apple_HFS Mirror1 *639.8 GB disk3 -> diskutil appleraid list AppleRAID sets (1 found) =============================================================================== Name: Macintosh HD Unique ID: 1953F864-B474-4EB6-8E69-41834EBD0247 Type: Mirror Status: Online Size: 639.8 GB (639791038464 Bytes) Rebuild: manual Device Node: disk3 ------------------------------------------------------------------------------- # Device Node UUID Status ------------------------------------------------------------------------------- 0 disk1s2 25109BAE-5697-40EA-B612-0217851444F7 Online 1 disk0s2 11B83AB0-8148-4DB6-8761-DEF08C855F8D Online =============================================================================== Thanks in advance.

    Read the article

< Previous Page | 70 71 72 73 74 75 76 77 78 79 80 81  | Next Page >