Search Results

Search found 2138 results on 86 pages for 'daniel ball'.

Page 74/86 | < Previous Page | 70 71 72 73 74 75 76 77 78 79 80 81  | Next Page >

• networking fails when DNS servers are specified manualy

  - by Matthew Scouten

  When I let Windows-7 use DHCP to find its own DNS server, everything works fine. Then I use ipconfig to get the IPs of the DNS servers in question, and specify them manually. Now the network stops working. (I need to do this because my next step is to restore the router that is going to lie about the proper DNS server. Don't ask why, it is required by my father's work. The IT there are not exactly on the ball.) Why would this make a difference? It is the same set of servers, just obtained differently.

  Read the article

• Collision with half semi-circle

  - by heitortsergent

  I am trying to port a game I made using Flash/AS3, to the Windows Phone using C#/XNA 4.0. You can see it here: http://goo.gl/gzFiE In the flash version I used a pixel-perfect collision between meteors (it's a rectangle, and usually rotated) that spawn outside the screen, and move towards the center, and a shield in the center of the screen(which is half of a semi-circle, also rotated by the player), which made the meteor bounce back in the opposite direction it came from, when they collided. My goal now is to make the meteors bounce in different angles, depending on the position it collides with the shield (much like Pong, hitting the borders causes a change in the ball's angle). So, these are the 3 options I thought of: -Pixel-perfect collision (microsoft has a sample(http://create.msdn.com/en-US/education/catalog/tutorial/collision_2d_perpixel_transformed)) , but then I wouldn't know how to change the meteor angle after the collision -3 BoundingCircle's to represent the half semi-circle shield, but then I would have to somehow move them as I rotate the shield. -Farseer Physics. I could make a shape composed of 3 lines, and use that as the collision object for the shield. Is there any other way besides those? Which would be the best way to do it(it's aimed towards mobile devices, so pixel-perfect is probably not a good choice)? Most of the time there's always a easier/better way than what we think of...

  Read the article

• Announcing SharePoint Saturday Columbus 2010

  - by Brian Jackett

  It is with great pleasure that today I can announce the very first SharePoint Saturday Columbus.  SharePoint Saturday Columbus 2010 will be happening on August 14th at The Conference Center at OCLC in Dublin, OH.  As many of the readers of my blog may be aware I’ve attended or spoken at over half a dozen SharePoint Saturdays in the past 8 months alone, but this will be my first time actually organizing one.  Myself and a group of very dedicated individuals have been hard at work the past few months getting the ball rolling and we’re happy to see it taking shape.   Pertinent Resources Website – find announcements and up to the date details at www.SharePointSaturday.org/Columbus Twitter – follow us at @SPSColumbus Email – email us at [email protected] with any questions, comments, or concerns   What can you do?     There are three main areas that we are looking for your help at this time. Spread the word – simply put start spreading the word to friends, coworkers, user groups, clients, and anyone else you think may be interested in SharePoint Saturday Columbus 2010.  We’ll be opening registration in early July so look for an announcement with details closer to that timeframe. Sponsorship – if your company or a company you know is interested in sponsoring SharePoint Saturday Columbus 2010 we have many opportunity levels available.  Email [email protected] for more information and we’ll send you a sponsorship packet. Speakers – if you or someone you know is interested in presenting at SharePoint Saturday Columbus 2010 please fill out a speaker submission form found here and email it to [email protected] by July 10th. I hope you can join us for this great event!         -Frog Out

  Read the article

• Font Book does not Install all Fonts

  - by waiwai933

  My Mac decided to delete all but 19 fonts, which is fairly annoying. It didn't really delete them, as in I still have the original files in the /Library/Fonts folder, but they've disappeared from Font Book, so I can't use them. Now, Apple says that you can select a folder to install all fonts in that folder, but when I try that, the spinning wheel (not the beach ball) comes up in the lower right hand corner for a few seconds and then leaves, without installing any fonts. The same thing happens if I use the + sign in the menu bar, select multiple, or if I try validating and then installing (actually, that installs one font). Is there any way to mass-install these fonts or will I have to install them one by one? Comp info: Mac OS X 10.5.8 running Font Book 2.1 (123).

  Read the article

• Tips about how to spread Object Oriented practices

  - by Augusto

  I work for a medium company that has around 250 developers. Unfortunately, lots of them are stuck in a procedural way of thinking and some teams constantly deliver big Transactional Script applications, when in fact the application contains rich logic. They also fail to manage the design dependencies, and end up with services which depend on another large number of services (a clean example of Big Ball of Mud). My question is: Can you suggest how to spread this type of knowledge? I know that the surface of the problem is that these applications have a poor architecture and design. Another issue is that there are some developers who are against writing any kind of test. A few things I'm doing to change this (but I'm either failing or the change is too small are) Running presentations about design principles (SOLID, clean code, etc). Workshops about TDD and BDD. Coaching teams (this includes using sonar, findbugs, jdepend and other tools). IDE & Refactoring talks. A few things I'm thinking to do in the future (but I'm concern that they might not be good) Form a team of OO evangelists, who disseminate an OO way of thinking in differet teams (these people would need to change teams every few months). Running design review sessions, to criticise the design and suggest improvements (even if the improvements are not done because of time constraints, I think this might be useful) . Something I found with the teams I coach, is that as soon as I leave them, they revert back to the old practices. I know I don't spend a lot of time with them, usually just one month. So whatever I'm doing, it doesn't stick. I'm sorry this question is spattered with frustration, but the alterative to write this was to hit my head on the wall until I pass out.

  Read the article

• Mix10 is in history, Windows Phone 7 is here!

  MIX10was really a fantastic conference for Telerik! We had great talks, many customers stopped by our booth and we've got a lot of great feedback for our Silverlight Controls. Thank you for stopping by and sharing your opinion! So now, that the MIX is over, there is one question left: What Telerik will develop for theWindows Phone 7? We had this question on the booth over and over again and it is no doubt that the WP7 development is a hot topic now. All we can sayat this momentis that Yes, we are looking into this and we actually have some of our controls already partially working with WP7 internally :) You know that the Silverlight version for WP7 is Silverlight 3 and it has some very good additions over it in order to support the phone hardware - like webcam, mic, accelerometer, etc. If you missed the conference and the sessions- here is a list of videos thatwill get you started: Building Windows Phone Applications with Silverlight, Part 1 Mike Harsh Building Windows Phone Applications with Silverlight, Part 2 Peter Torr The good thing isthat our controls will needvery few tweaks in order to be *compiled* against the WP7 Silverlight runtime. But, the more interesting part is actually what are the scenarios that our controls will be used in. How different they will be from the desktop version of the SL? This is where we need your feedback - drop as a line and let us know what are your expectations in this area. Do you need something specific, a feature or a new control that you like to use, or maybe you have a specific scenario that you want to share. Nowthe ball is in your hands - write on the forums, send us a ticket, or just leave your comment on WP7 developmentbelow! Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Puppet: Conditional file source based on naming convention

  - by thinice

  I'm getting the ball rolling on puppet for my environment - and I'd like to have a conditional file resource based on whether or not the module itself contains a file based on a naming convention. So visually, assume a module named 'mysql' and it's layout: mysql/ /files /etc/ my.cnf my.hostname1.cnf my.hostname2.cnf /manifests init.pp ... So I'd like the block to verify if the resource for the module exists or not, and take action accordingly, in pseudo-terms: file { '/etc/my.cnf': if -f 'puppet:///mysql/etc/my.$hostname.cnf' { source => 'puppet:///mysql/etc/my.$hostname.cnf' } else { source => 'puppet:///mysql/etc/my.cnf' } } This way one wouldn't have to manage a csv file or the .pp file with a host specific case statement - is this possible?

  Read the article

• this.BoundingBox.Intersects(Wall[0].BoundingBox) not working properly

  - by Pieter

  I seem to be having this problem a lot, I'm still learning XNA / C# and well, trying to make a classic paddle and ball game. The problem I run into (and after debugging have no answer) is that everytime I run my game and press either of the movement keys, the Paddle won't move. Debugging shows that it never gets to the movement part, but I can't understand why not? Here's my code: // This is the If statement for checking Left movement. if (keyboardState.IsKeyDown(Keys.Left) || keyboardState.IsKeyDown(Keys.A)) { if (!CheckCollision(walls[0])) { Location.X -= Velocity; } } //This is the CheckCollision(Wall wall) boolean public bool CheckCollision(Wall wall) { if (this.BoundingBox.Intersects(wall.BoundingBox)) { return true; } return false; } As far as I can tell there should be absolutely no problem with this, I initialize the bounding box in the constructor whenever a new instance of Walls and Paddle is created. this.BoundingBox = new Rectangle(0, 0, Sprite.Width, Sprite.Height); Any idea as to why this isn't working? I have previously succeeded with using the whole Location.X < Wall.Location.X + Wall.Texture.Width code... But to me that seems like too much coding if a simple boolean check could be done.

  Read the article

• Collision with half of a semi-circle

  - by heitortsergent

  I am trying to port a game I made using Flash/AS3, to the Windows Phone using C#/XNA 4.0. You can see it here: http://goo.gl/gzFiE In the flash version I used a pixel-perfect collision between meteors (it's a rectangle, and usually rotated) that spawn outside the screen, and move towards the center, and a shield in the center of the screen(which is half of a semi-circle, also rotated by the player), which made the meteor bounce back in the opposite direction it came from, when they collided. My goal now is to make the meteors bounce in different angles, depending on the position it collides with the shield (much like Pong, hitting the borders causes a change in the ball's angle). So, these are the 3 options I thought of: Pixel-perfect collision (Microsoft has a sample) , but then I wouldn't know how to change the meteor angle after the collision 3 BoundingCircle's to represent the half semi-circle shield, but then I would have to somehow move them as I rotate the shield. Farseer Physics. I could make a shape composed of 3 lines, and use that as the collision object for the shield. Is there any other way besides those? Which would be the best way to do it(it's aimed towards mobile devices, so pixel-perfect is probably not a good choice)? Most of the time there's always a easier/better way than what we think of...

  Read the article

• How can I draw crisp per-pixel images with OpenGL ES on Android?

  - by Qasim

  I have made many Android applications and games in Java before, however I am very new to OpenGL ES. Using guides online, I have made simple things in OpenGL ES, including a simple triangle and a cube. I would like to make a 2D game with OpenGL ES, but what I've been doing isn't working quite so well, as the images I draw aren't to scale, and no matter what guide I use, the image is always choppy and not the right size (I'm debugging on my Nexus S). How can I draw crisp, HD images to the screen with GL ES? Here is an example of what happens when I try to do it: And the actual image: Here is how my texture is created: //get id int id = -1; gl.glGenTextures(1, texture, 0); id = texture[0]; //get bitmap Bitmap bitmap = BitmapFactory.decodeResource(context.getResources(), R.drawable.ball); //parameters gl.glBindTexture(GL10.GL_TEXTURE_2D, id); gl.glTexParameterf(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_MIN_FILTER, GL10.GL_NEAREST); gl.glTexParameterf(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_MAG_FILTER, GL10.GL_LINEAR); gl.glTexParameterf(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_WRAP_S, GL10.GL_CLAMP_TO_EDGE); gl.glTexParameterf(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_WRAP_T, GL10.GL_CLAMP_TO_EDGE); gl.glTexEnvf(GL10.GL_TEXTURE_ENV, GL10.GL_TEXTURE_ENV_MODE, GL10.GL_REPLACE); GLUtils.texImage2D(GL10.GL_TEXTURE_2D, 0, bitmap, 0); //crop image mCropWorkspace[0] = 0; mCropWorkspace[1] = height; mCropWorkspace[2] = width; mCropWorkspace[3] = -height; ((GL11) gl).glTexParameteriv(GL10.GL_TEXTURE_2D, GL11Ext.GL_TEXTURE_CROP_RECT_OES, mCropWorkspace, 0);

  Read the article

• Coordinate and positioning problem on iOS with cocos2d-x

  - by Vexille

  I'm using cocos2d-x alongside with Marmalade and running some tests and tutorials before starting an actual project with them. So far things are working reasonably well on the windows simulator, Android and even on Blackberry's Playbook, but on iOS devices (iPhone and iPad) the positioning seems to be off. To make things clearer, I put together a scene that just draws an image in the middle of the screen. It worked as expected on everything else, but this is the result I got on an iPhone: To get the coordinates for the center of the screen I'm using the VisibleRect class from the TestCpp sample. It just uses sharedOpenGLView to get the visible size and visible origin, and calculate the center from that. CCSprite* test = CCSprite::create("Ball.png", CCRectMake(0, 0, 80, 80) ); test->setPosition( ccp(VisibleRect::center().x, VisibleRect::center().y) ); this->addChild(test); Also I have a noBorder policy set on AppDelegate: CCEGLView::sharedOpenGLView()->setDesignResolutionSize(designSize.width, designSize.height, kResolutionNoBorder); One funny thing is that I tried to deploy the TestCpp sample project to some iOS devices and it worked reasonably well on the iPhone, but on the iPad the application was only being drawn on a small portion of the screen - just like what happened on the iPhone when I tried using the ShowAll policy.

  Read the article

• Is a computer's DRAM size not as important once we get a Solid State Drive?

  - by Jian Lin

  I am thinking of getting a Dell X11 netbook, and it can go up to 8GB of DRAM, together with a 256GB Solid State Drive. So in that case, it can handle quite a bit of Virtual PC running Linux, and Win XP, etc. But is the 8GB of RAM not so important any more? Won't 2GB or 4GB be quite good if a Solid State Drive is used? I think the most worrying thing is that the memory is not enough and the less often used data is swapped to the pagefile on hard disk and it will become really slow, but with an SSD drive, the problem is a lot less of a concern? Is there a comparison as to, if DRAM speed is n, then SSD drive speed is how many n and hard disk speed is how many n just as a ball park comparison?

  Read the article

• Poppler installation

  - by Menopia

  I downloaded the new poppler 0.15 tar ball and i built it from source successfully but when trying dpkg -l | grep poppler it outputs ii libpoppler-dev 0.14.3-0ubuntu1.1 PDF rendering library -- development files ii libpoppler-glib-dev 0.14.3-0ubuntu1.1 PDF rendering library -- development files (GLib interface) ii libpoppler-glib4 0.12.4-1ubuntu1 PDF rendering library (GLib-based shared library) ii libpoppler-glib5 0.14.3-0ubuntu1.1 PDF rendering library (GLib-based shared library) ii libpoppler5 0.12.4-1ubuntu1 PDF rendering library rc libpoppler6 0.14.2.is.0.14.1-0ubuntu1 PDF rendering library ii libpoppler7 0.14.3-0ubuntu1.1 PDF rendering library ii poppler-utils 0.14.3-0ubuntu1.1 PDF utilitites (based on libpoppler) So AFAIK this means that the new version is not installed !!

  Read the article

• How do I clip an image in OpenGL ES on Android?

  - by Maxim Shoustin

  My game involves "wiping off" an image by touch: After moving a finger over it, it looks like this: At the moment, I'm implementing it with Canvas, like this: 9Paint pTouch; 9int X = 100; 9int Y = 100; 9Bitmap overlay; 9Canvas c2; 9Rect dest; pTouch = new Paint(Paint.ANTI_ALIAS_FLAG); pTouch.setXfermode(new PorterDuffXfermode(Mode.SRC_OUT)); pTouch.setColor(Color.TRANSPARENT); pTouch.setMaskFilter(new BlurMaskFilter(15, Blur.NORMAL)); overlay = BitmapFactory.decodeResource(getResources(),R.drawable.wraith_spell).copy(Config.ARGB_8888, true); c2 = new Canvas(overlay); dest = new Rect(0, 0, getWidth(), getHeight()); Paint paint = new Paint();9 paint.setFilterBitmap(true); ... @Override protected void onDraw(Canvas canvas) { ... c2.drawCircle(X, Y, 80, pTouch); canvas.drawBitmap(overlay, 0, 0, null); ... } @Override 9public boolean onTouchEvent(MotionEvent event) { switch (event.getAction()) { case MotionEvent.ACTION_DOWN: case MotionEvent.ACTION_MOVE: { X = (int) event.getX(); Y = (int) event.getY();9 invalidate(); c2.drawCircle(X, Y, 80, pTouch);9 break; } } return true; ... What I'm essentially doing is drawing transparency onto the canvas, over the red ball image. Canvas and Bitmap feel old... Surely there is a way to do something similar with OpenGL ES. What is it called? How do I use it? [EDIT] I found that if I draw an image and above new image with alpha 0, it goes to be transparent, maybe that direction? Something like: gl.glColor4f(0.0f, 0.0f, 0.0f, 0.01f);

  Read the article

• Diff and ignore lines missing in one file

  - by Millianz

  I want to diff two files and ignore lines that are present in one file but missing in the other. For example File1: foo bar baz bat File2: foo ball bat I'm currently running the following diff command diff File1 File2 --changed-group-format='%>' --unchanged-group-format='' Which in this case would produce bar baz as the output, i.e. only missing or conflicting lines. I would like to only print conflicting lines, i.e. ignore cases where one line is missing from File2 and is present in File1 (not the other way around). Is there any way to do something like this using diff or do I have to resort to other tools? If so, what would you recommend?

  Read the article

• How to adjust the shooting angle of an object

  - by Blue

  I've been trying to add an angle adjustment feature to a power bar that I got from unity3dStudents. But I can't seem to get the code right. I'm using addforce to rigidbody, it works but the power is too great. I also found that rotating the object it's shooting from changes the angle. But I don't know how to proceed from that. Can somebody show me the problem with the script below, as in how to add height to the addforce without it going to far up or to the side? Or how to change the angle of the object? var theAngle : int; var maxAngle : int = 130; var minAngle : int = 0; var angleIncreasing : boolean = false; var angleDecreasing : boolean = false; var rotationSpeed : float = 10; var ball : Rigidbody; var spawnPos : Transform; var shotForce : float = 25; function Update () { if(Input.GetKeyDown("k")){ angleIncreasing = true; angleDecreasing = false; } if(Input.GetKeyUp("k")){ angleIncreasing = false; } if(Input.GetKeyDown("l")){ angleIncreasing = false; angleDecreasing = true; } if(Input.GetKeyUp("l")){ angleDecreasing = false; } ------- if(angleIncreasing){ theAngle += Time.deltaTime * rotationSpeed; if(theAngle > maxAngle){ theAngle = maxAngle; } } if(angleDecreasing){ theAngle -= Time.deltaTime * rotationSpeed; if(theAngle < minAngle){ theAngle = minAngle; } } } function Shoot(power : float, angle : int){ ---- var forward : Vector3 = spawnPos.forward; var upward : Vector3 = spawnPos.up; pFab.AddForce(forward * power * shotForce); pFab.AddForce(upward * angle * 10); ---- }

  Read the article

• OpenGL ES multiple objects not being rendered

  - by ladiesMan217

  I am doing the following to render multiple balls move around the screen but only 1 ball is seen to appear and function. I don't know why the rest (count-1) balls are not being drawn public void onDrawFrame(GL10 gl) { // TODO Auto-generated method stub gl.glDisable(GL10.GL_DITHER); gl.glClear(GL10.GL_COLOR_BUFFER_BIT | GL10.GL_DEPTH_BUFFER_BIT); gl.glMatrixMode(GL10.GL_MODELVIEW); gl.glClientActiveTexture(DRAWING_CACHE_QUALITY_HIGH); gl.glLoadIdentity(); for(int i=0;i<mParticleSystem.getParticleCount();i++){ gl.glPushMatrix(); gl.glTranslatef(mParticleSystem.getPosX(i), mParticleSystem.getPosY(i), -3.0f); gl.glScalef(0.3f, 0.3f, 0.3f); gl.glColor4f(r.nextFloat(), r.nextFloat(), r.nextFloat(), 1); gl.glEnable(GL10.GL_TEXTURE_2D); mParticleSystem.getBall(i).draw(gl); gl.glPopMatrix(); } } Here is my void draw(GL10 gl) method public void draw(GL10 gl){ gl.glEnable(GL10.GL_CULL_FACE); gl.glEnable(GL10.GL_SMOOTH); gl.glEnable(GL10.GL_DEPTH_TEST); // gl.glTranslatef(0.2f, 0.2f, -3.0f); // gl.glScalef(size, size, 1.0f); gl.glVertexPointer(3, GL10.GL_FLOAT, 0, vertBuff); gl.glEnableClientState(GL10.GL_VERTEX_ARRAY); gl.glDrawArrays(GL10.GL_TRIANGLE_FAN, 0, points/2); gl.glDisableClientState(GL10.GL_VERTEX_ARRAY); }

  Read the article

• How do I interpolate air drag with a variable time step?

  - by Valentin Krummenacher

  So I have a little game which works with small steps, however those steps vary in time, so for example I sometimes have 10 Steps/second and then I have 20 Steps/second. This changes automatically depending on how many steps the user's computer can take. To avoid inaccurate positioning of the game's player object I use y=v0*dt+g*dt^2/2 to determine my objects y-position, where dt is the time since the last step, v0 is the velocity of my object in the beginning of my step and g is the gravity. To calculate the velocity in the end of a step I use v=v0+g*dt what also gives me correct results, independent of whether I use 2 steps with a dt of for example 20ms or one step with a dt of 40ms. Now I would like to introduce air drag. For simplicity's sake I use a=k*v^2 where a is the air drag's acceleration (I am aware that it would usually result in a force, but since I assume 1kg for my object's mass the force is the same as the resulting acceleration), k is a constant (in this case I'm using 0.001) and v is the speed. Now in an infinitely small time interval a is k multiplied by the velocity in this small time interval powered by 2. The problem is that v in the next time interval would depend on the drag of the last which again depends on the v of the last interval and so on... In other words: If I use a=k*v^2 I get different results for my position/velocity when I use 2 steps of 20ms than when I use one step of 40ms. I used to have this problem for my position too, but adding +g*dt^2/2 to the formula for my position fixed the problem since it takes into account that the position depends on the velocity which changes slightly in every infinitely small time interval. Does something like that exist for air drag too? And no, I dont mean anything like Adding air drag to a golf ball trajectory equation or similar, for that kind of method only gives correct results when all my steps are the same. (I hope you can understand my intermediate english, it's not my main language so I would like to say sorry for all the silly mistakes I might have made in my question)

  Read the article

• Find possible variations of one item out of multiple baskets.

  - by tugberk

  I have three baskets of balls and each of them has 10 balls which have the following numbers: Basket 1: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 Basket 2: 11, 12, 13, 14, 15, 16, 17, 18, 19, 20 Basket 3: 21, 22, 23, 24, 25, 26, 27, 28, 29, 30 What would be the possible variations If I were to pick one ball from each basket? I guess this is called as Probability in Mathematics but not sure. How would you write this code in C# (or any other programming language) to get the correct results? Edit: Based on @Kilian Foth's comment, here is the solution in C#: class Program { static void Main(string[] args) { IEnumerable<string> basket1 = new List<string> { "1", "2", "3", "4", "5", "6", "7", "8", "9", "10" }; IEnumerable<string> basket2 = new List<string> { "11", "12", "13", "14", "15", "16", "17", "18", "19", "20" }; IEnumerable<string> basket3 = new List<string> { "21", "22", "23", "24", "25", "26", "27", "28", "29", "30" }; foreach (var item1 in basket1) foreach (var item2 in basket2) foreach (var item3 in basket3) { Console.WriteLine("{0}, {1}, {2}", item1, item2, item3); } Console.ReadLine(); } }

  Read the article

• How to play SWF files without browser

  - by Mehper C. Palavuzlar

  I like to play some downloaded Shockwave Flash (.SWF) files without opening my internet browser. Sometime ago, I remember I could do it just double clicking on the SWF item. Then it was opening in a plain Shockwave window. Now XP won't play ball. I tried Folder Options > File types but couldn't find the associated player exe. How can I surpass this? Edit: There has to be some way to do this without a 3rd party software since I can already play SWFs on my browsers.

  Read the article

• Hyperion Training from Oracle University

  - by Mike.Hallett(at)Oracle-BI&EPM

  Normal 0 false false false EN-GB X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;} There is a great portfolio of the latest version of Hyperion Training from Oracle University, available at a discount for Oracle Partners, for example see these sets of courses: Disclosure Management Financial Close Management (2) Financial Data Quality Management (3) Hyperion Financial Management (14) Integrated Operational Planning Planning (13) Profitability Management (2) Public Sector Planning and Budgeting (3) Smart View (9) Strategic Finance Data Relationship Management (3) Crystal Ball (4)

  Read the article

• How do I improve picture quality while streaming live football (soccer) from my Dell D600 to an HDTV?

  - by Bob

  I have fibre broadband with speeds up to 38mbs, my Dell D600 has its max 2gb ram and has an ATI Mobility RADEON 9000 4xAGP 32mb card in it...Its TV support it says is NTSC or PAL in S-video and composite modes with a 7-pin mini-DIN connector (optional S-video to composite video adapter cable) and a vga port which i am using at the moment... The laptop runs Windows XP, an 80g HD with only windows + necessary updates and anti virus software on it..... There is HDMI on the TV, but not the laptop Fairly slow moving and close up pictures arent too bad, but when the movment is fast(a shot on goal) or in the distance, I cant see the ball and the images go out of focus.

  Read the article

• Installing software from source

  - by Learning

  I'm trying to understand the rational behind installing from software from source in Ubuntu 12.04. Obviously, I know I can download what I need from repos, but I want to develop a deeper understanding of Linux. As a Windows users, when I download a program I double click it, and it installs into the program files directory unless I specify otherwise. When I want to uninstall it, Windows has a tools that does that for me. When I install a program in Linux, where does it install to? How do I uninstall it afterwards? Are there residual files left over? How would I tell if it's been fully removed? For instance, I'm going to install LMMS (Linux Multimedia Studio) from source. I download and decompress the tar ball, and have a folder name lmms_XXX.tar (whatever). The folder is now on my desktop with an install file. If I run the install file from that location, does it install into that folder? If so, can I move that folder to where ever I want? I want thinking about putting it in /opt/lmms

  Read the article

• How to move the rigidbody at the position of the mouse on release

  - by Edvin

  I'm making a "Can Knockdown" game and I need the rigidbody to move where the player released the mouse(OnMouseUp). Momentarily the Ball moves OnMouseUp because of rigidbody.AddForce(force * factor); and It moves toward the mousePosition but doesn't end up where the mousePosition is. Here's what I have so far in the script. var factor = 20.0; var minSwipeDistY : float; private var startTime : float; private var startPos : Vector3; function OnMouseDown(){ startTime = Time.time; startPos = Input.mousePosition; startPos.z = transform.position.z - Camera.main.transform.position.z; startPos = Camera.main.ScreenToWorldPoint(startPos); } function OnMouseUp(){ var endPos = Input.mousePosition; endPos.z = transform.position.z - Camera.main.transform.position.z; endPos = Camera.main.ScreenToWorldPoint(endPos); var force = endPos - startPos; force.z = force.magnitude; force /= (Time.time - startTime); rigidbody.AddForce(force * factor); }

  Read the article

• Game with changing logic

  - by rsprat

  I'm planing to develop a puzzle like mobile game (android/ios) with a different logic for each puzzle. Say, for example one puzzle could be a Rubik's cube and another one a ball maze. Many more new puzzles will appear during the life of the game, and I want the users to be able to play those new puzzles. The standard way for managing this would be through application updates. Each time a new puzzle or bunch of puzzles appear, create a new update for the app that the user can download. However, I would like to do it in a more transparent way. When a new puzzle appears, the basic info of the puzzle would be displayed in the app menu, and the user would be able to play it by just clicking it. What comes to my mind is that the app would automatically download a .dll or .jar and inject it in the application at runtime. Is that even possible? Are there any restrictions from the OS? Is there a better way for solving it? Thanks alot

  Read the article

< Previous Page | 70 71 72 73 74 75 76 77 78 79 80 81  | Next Page >