Search Results

Search found 3565 results on 143 pages for 'in house distribution'.

Page 74/143 | < Previous Page | 70 71 72 73 74 75 76 77 78 79 80 81  | Next Page >

• pinx 501 with print server - 10 licenses

  - by ra170

  I have pix 501 with only 10 licenses. I'm already approaching this limit, running 2 computers at home, 2 laptops, PS3, iphones, 2 web cams..not everthing is on all the time, but it's possible as I'm looking into adding a print server, so that I can print from anywhere in the house. So my question is, will the print server count as a connection towards the license? I think it will need default gateway, which in this case will be my pix 501. I've seen somewhere on some othee board saying, don't set default gateway in the print server to pix 501, but then how would that work? is there a work around? I don't need to print from VPN or from outside, just inside..

  Read the article

• Disconnected from WiFi, Windows claims otherwise [closed]

  - by Manu

  I'm connected via wifi to my ISP's router/modem. While Windows says that I'm always connected, I keep getting messages from Netgear Genie that I've lost contact to the Internet, and I cannot access webpages until it comes back. There are two other computers in the house, one connected to the router via ethernet, the other via wifi, both seem to have no such problems. I've wondered if Netgear genie itself was the problem, but I am regularly disconnected even if I uninstall it. And I'd rather have it since it accurently tells me if I'm connected or not. Why does windows says I'm online if I can't access any online game, or website ? I've removed the connection, recreated it, I've even copied the settings to a usb key from the computer that has wifi access. Is there a tool that can tell me which program, if any, is disconecting me ?

  Read the article

• Moving files from Public folder to C: takes a minute, even though they are same hard drive and same

  - by Jian Lin

  I have a big file, like 2GB, and would like to move it from Network -> Bookroom -> Users -> Public (this is the computer in the bookroom in the house) to c:\myfiles and they are actually on the SAME hard drive (and same partition). But copying still takes a minute or so? I thought if on the same hard drive and partition, then it is a "move" and it should take 2, 3 seconds only. that public folder also is \\Bookroom\Users\Public Update: Sorry, I actually mean "move" all the way... so it is not copy but move. So that's why I thought it should take 2, 3 seconds only.

  Read the article

• Why does my wifi fail to stay connected?

  - by Mark0978

  We have 5 different laptops in the house, 1 macbook, 1 Compaq, 3 dells, plus numerous little devices like ipods, squeezeboxs, squeezebox radios and controllers, you name it. All of them connect to and stay connected to the "downstairs" WIFI just fine. But my laptop (the most expensive of the lot) refuses to stay connected, preferring the much weaker and slower signal upstairs. My laptop is running Win7 (64 bit) Ultimate with an Intel 3945ABG WIFI contoller (It's a Dell Precision M6300). The WIFI Access Point is a Cisco WRT54G2 V1 with firmware: Firmware: DD-WRT v24-sp2 (10/10/09) micro Time: 11:11:10 up 42 min, load average: 0.06, 0.01, 0.00 WAN: Disabled

  Read the article

• What is the right way to use Internet Sharing in OS X?

  - by Bob King

  For a while now I've been using the Wireless in my Mac Mini as a seperate WiFi access point because my main router doesn't quite cover my whole house. There is a dedicated CAT 5E line down to the Mini, which has a static IP address. I've turned Internet Sharing on, using Airport/WiFi but it seems my options for security are limited. Can I do WPA2? Also, it seems like my iPhone only connects 25% of the time, and the rest of the time it claims I've given a bad password. I've tried "Forget this network" repeatedly.

  Read the article

• Why are default spamassassin rules not being applied to emails we generate?

  - by Chance

  My company uses a standalone spam-assassin install to test marketing emails, however, mail originating from us does not seem to run the full gamut of test. For example, Spam assassin has a default rule that flags messages that contain the phrase Dear [Something], and it properly flags spam that I feed it.It does not, however, apply that same rule to in house email I send it. Is it possible that spam assassin has white-listed us somehow, perhaps because the mail originates in the same domain as the server or receiver? I believe most of the recent spamassassin questions have been mine, so thanks for bearing with me as I figure this out! Chance EDIT Details on our SA setup: We are piping the emails into the CL with spamc -R < test_email.eml Identical results testing as root or a user, no user_prefs file

  Read the article

• postfix relay access denied from some IPs

  - by Caballero

  This is driving me nuts. I have Postfix/Dovecot set up on Centos 6 VPS for my emails. I can send and receive emails without any problems on my outlook (home broadband), on my Android phone (3G connection), however when I set up exactly the same email account on Outlook at my friends house I'm getting bouncebacks when I'm trying to send email (receiving works fine): 554 5.7.1 : Relay access denied Now if it wasn't working at all I'd understand, but why is it working on several internet connections, but not everywhere? Can someone shed some light on this? Where should I look for the problem?

  Read the article

• Windows 8 doesn't automatically join Wi-Fi network if Ethernet connection is active

  - by Herb Caudill

  In Windows 7, my laptop would automatically join both an Ethernet network and the Wi-Fi network in my house (both going through the same router). In Windows 8, if the Ethernet connection is present, it doesn't join the Wi-Fi network at all. The reason I noticed this is that if Wi-Fi isn't active, I don't see my AirPlay speakers. My wireless printer is also unavailable until I manually connect to Wi-Fi. To recap: When I turn on my computer and it's connected to Ethernet, this is what my Network Connections control panel looks like: After I manually join my Wi-Fi network, it looks like this: I would prefer for it to join both networks automatically on startup, the way it did in Windows 7. Is there a way to make this happen?

  Read the article

• Shielded ethernet cable and ethernet sockets earthing how to?

  - by ageis23

  Hi I'm going to install 5 Ethernet sockets in my house using cat5e shielded cable. I decided to use this because the sockets will be on the second floor and the most practical way up is within a trunk along with some mains wiring. The cable will be terminated at the router and at the Ethernet faceplate. What can I use to earth then? The faceplate/router are both plastic hence no earth wire needed. I can't use the earth wire within the main socket can I? I figured it will be very very dangerous. I don't want to be connecting to the earth block on the mains either since I totally incompetent when it comes to mains electricity.

  Read the article

• Install wireless router with cable modem - need authentication server?

  - by Paul

  I've bought a wireless router which I'm installing with a Telstra BigPond cable modem for a friend. As part of the setup I've got to a screen requesting username / password / authentication server for the cable modem They have contacted Telstra who supply the username / password and say that is all they need. They dont know anything about an authentication server. There are a couple of answers up on Whirlpool forum found through google but those answers are 4 years old. http://forums.whirlpool.net.au/forum-replies-archive.cfm/475258.html http://forums.whirlpool.net.au/forum-replies-archive.cfm/479615.html I havent tried them yet as I hoped to get actual answers before trundling over to my friends house again. Can anyone suggest, How to get information from Telstra support? (I realise this question maybe impossible to answer) What is the authentication server for Telstra BigPond for a user in Sydney Australia Are those whirlpool forum answers still valid? I guess if I dont get anything more here I'll try what it says on whirlpool and see what happens.

  Read the article

• stunnel crashing

  - by Jay

  I'm trying to use stunnel to secure a legacy application's communications. I can't seem to get it setup and working. Can anyone provide any hints where I'm going wrong? Here's what I'm trying to accomplish: A windows service on a client machine connects to a server on port 7000 using TCP. I'd like to encrypt the communication between client and server. Here's what I've tried: Created a new server that accepts ssl connections on port 7443. Got a certificate for the server and installed it. That seems to work with my test setup. Installed stunnel on my windows machine (version 7.43 from the distribution archive file). Installed libssl32.dll and libeay32.dll in the same directory as stunnel.exe ( from the openssl-0.9.8h-1 binary distribution). Installed it as a service using "stunnel -install" Configured stunnel as follows: debug=7 output=C:\p4\internal\Utility\Proxy\proxy.log service=Proxy taskbar=no [exchange] accept=7000 client=yes connect=proxy.blah.com:7443 I changed my hosts file to trick the old application into connecting through stunnel: server.blah.com 127.0.0.1 # when client looks up server it goes to stunnel proxy.blah.com IP-address-of-server.blah.com # stunnel connects to new server "server.blah.com" now resolves to the machine it's running on (i.e. stunnel). "proxy.blah.com" goes to the real server. stunnel should connect to the server. I start the stunnel service and try to connect. It looks like it's working but the stunnel service just shuts down with no message. 2010.04.19 13:16:21 LOG5[4924:3716]: stunnel 4.33 on x86-pc-mingw32-gnu with OpenSSL 0.9.8h 28 May 2008 2010.04.19 13:16:21 LOG5[4924:3716]: Threading:WIN32 SSL:ENGINE Sockets:SELECT,IPv6 2010.04.19 13:16:49 LOG5[4924:3748]: Service exchange accepted connection from 127.0.0.1:4134 2010.04.19 13:16:49 LOG6[4924:3748]: connect_blocking: connecting x.80.60.32:7443 2010.04.19 13:16:49 LOG5[4924:3748]: connect_blocking: connected x.80.60.32:7443 2010.04.19 13:16:49 LOG5[4924:3748]: Service exchange connected remote server from x.253.120.19:4135 2010.04.19 13:20:24 LOG5[3668:3856]: Reading configuration from file stunnel.conf 2010.04.19 13:20:24 LOG7[3668:3856]: Snagged 64 random bytes from C:/.rnd 2010.04.19 13:20:24 LOG7[3668:3856]: Wrote 1024 new random bytes to C:/.rnd 2010.04.19 13:20:24 LOG7[3668:3856]: RAND_status claims sufficient entropy for the PRNG 2010.04.19 13:20:24 LOG7[3668:3856]: PRNG seeded successfully 2010.04.19 13:20:24 LOG7[3668:3856]: SSL context initialized for service exchange 2010.04.19 13:20:24 LOG5[3668:3856]: Configuration successful 2010.04.19 13:20:24 LOG5[3668:3856]: No limit detected for the number of clients 2010.04.19 13:20:24 LOG7[3668:3856]: FD=312 in non-blocking mode 2010.04.19 13:20:24 LOG7[3668:3856]: Option SO_REUSEADDR set on accept socket 2010.04.19 13:20:24 LOG7[3668:3856]: Service exchange bound to 0.0.0.0:7000 2010.04.19 13:20:24 LOG7[3668:3856]: Service exchange opened FD=312 2010.04.19 13:20:24 LOG5[3668:3856]: stunnel 4.33 on x86-pc-mingw32-gnu with OpenSSL 0.9.8h 28 May 2008 2010.04.19 13:20:24 LOG5[3668:3856]: Threading:WIN32 SSL:ENGINE Sockets:SELECT,IPv6 2010.04.19 13:21:02 LOG7[3668:4556]: Service exchange accepted FD=372 from 127.0.0.1:4156 2010.04.19 13:21:02 LOG7[3668:4556]: Creating a new thread 2010.04.19 13:21:02 LOG7[3668:4556]: New thread created 2010.04.19 13:21:02 LOG7[3668:3756]: Service exchange started 2010.04.19 13:21:02 LOG7[3668:3756]: FD=372 in non-blocking mode 2010.04.19 13:21:02 LOG5[3668:3756]: Service exchange accepted connection from 127.0.0.1:4156 2010.04.19 13:21:02 LOG7[3668:3756]: FD=396 in non-blocking mode 2010.04.19 13:21:02 LOG6[3668:3756]: connect_blocking: connecting x.80.60.32:7443 2010.04.19 13:21:02 LOG7[3668:3756]: connect_blocking: s_poll_wait x.80.60.32:7443: waiting 10 seconds 2010.04.19 13:21:02 LOG5[3668:3756]: connect_blocking: connected x.80.60.32:7443 2010.04.19 13:21:02 LOG5[3668:3756]: Service exchange connected remote server from x.253.120.19:4157 2010.04.19 13:21:02 LOG7[3668:3756]: Remote FD=396 initialized 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): before/connect initialization 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 write client hello A 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 read server hello A 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 read server certificate A 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 read server done A 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 write client key exchange A 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 write change cipher spec A 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 write finished A 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 flush data 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 read finished A The client thinks the connection is closed: No connection could be made because the target machine actively refused it 127.0.0.1:7000 at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress) at System.Net.Sockets.Socket.Connect(EndPoint remoteEP) at Service.ConnUtility.Connect() Any suggestions?

  Read the article

• Issue Connecting two home networks

  - by Alex

  Hi, I have a home networking question. I have two DLINK wireless/wired routers in my house, connected to the Internet ISP. There are a 2 computers on each of the two networks. Network1: has 192.168.0.0 (gateway) Valid IP'S range - 192.168.0.1 - 192.168.0.10, with COMP1 having a fixed IP of 162.168.0.1 Network2: has 192.168.0.100 (gateway) Valid IP'S range - 192.168.0.101 - 192.168.0.110 with COMP2 having a static IP of 162.168.0.101, a WIRELESS printer on 192.168.0.102 Both routers have a netmask of 255.255.255.0 My need is to connect the two routers, so that I can Remote desktop for COMP1 to COMP2 and viceversa, and COMP1 to connect to the wireless printer on Network2. can anyone help to set this up so that the both networks can talk to each other. Any help is appreciated. -Alex

  Read the article

• need advice for storing data setup hardware for client with 80TB per year of data footprint increase

  - by dasko

  hi everyone, i currently have a client that will be adding replicated data from satellite locations in the number of approximately 80TB per year. with this said in year 2 we will have 160TB and so on year after year. i want to do some sort of raid 10 or raid 6 setup. i want to keep the servers to approximately 4u high and rack mounted. all suggestions welcome on a replication strategy. we will be wanting to have one instance of the data in house and the other to be co-located (any suggestions on co-locate sites too?). the obvious hardware will be something like a rack mount server with hot swap trays and dual xeon based type processors. the use of the data is for archives of information, files will be made up of small file sizes. i can add or expand to this question if it is too vague. thanks for looking.

  Read the article

• Files turned into folders on external hard drive

  - by Kashif

  I have a networked hard drive where I like to store audio/video/software and all sorts of other files for my house. While the software files are all intact and working, many of my video and audio files have been turned into folders! Can anyone explain why this is happening, how I can prevent it, and if it is possible to revert these "folders" back into files. Thanks much! An example of what the folders are named: "Highschool Graduation.avi", "Birthday party.avi", "Somesong.mp3" The HDD is connected to a Linksys E4200 router (Firmware Version: 2.0.37). This is how the HDD is networked.

  Read the article

• LAN connection suddenly domain_not_set.invalid

  - by Liam Coates

  I went to work today - internet fine as always. Came back, dreaded yellow triangle. I can connect wirelessly like i am now on my tablet. Thats completely fine. But through LAN I get the domain_not_set.Invalid message if I renew my IP for example. It seems I just don't have a DNS. But I have literally not touched anything no ones even been in the house. Hows that happen? Any help on why only wireless works would be great, I am gonna buy a wireless adapter tomorrow for the interim but I would like to know why. Thanks.

  Read the article

• Problem installing build-essential and upgrading g++ on Ubuntu 8.04

  - by ehsanul

  I'm having some trouble with dependencies it seems, but myself don't really know how to resolve the issue. Here's the output: ~:) sudo apt-get install build-essential Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. Since you only requested a single operation it is extremely likely that the package is simply not installable and a bug report against that package should be filed. The following information may help to resolve the situation: The following packages have unmet dependencies: build-essential: Depends: g++ (>= 4:4.3.1) but 4:4.2.3-1ubuntu6 is to be installed E: Broken packages ~:) sudo apt-get install g++ Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. Since you only requested a single operation it is extremely likely that the package is simply not installable and a bug report against that package should be filed. The following information may help to resolve the situation: The following packages have unmet dependencies: g++: Depends: cpp (>= 4:4.3.1-1ubuntu2) but 4:4.2.3-1ubuntu6 is to be installed Depends: gcc (>= 4:4.3.1-1ubuntu2) but 4:4.2.3-1ubuntu6 is to be installed Depends: g++-4.3 (>= 4.3.1-1) but it is not going to be installed Depends: gcc-4.3 (>= 4.3.1-1) but it is not installable E: Broken packages ~:) Edit: I just tried aptitude instead of apt-get, as suggested. Doesn't work, had other problems: ~:) sudo aptitude install build-essential [sudo] password for ehsanul: Reading package lists... Done Building dependency tree Reading state information... Done Reading extended state information Initializing package states... Done Building tag database... Done The following packages are BROKEN: g++ g++-4.3 libstdc++6-4.3-dev The following packages have been automatically kept back: dpkg-dev fakeroot libdns35 libisc35 linux-libc-dev patch The following NEW packages will be automatically installed: libgmp3c2 libmpfr1ldbl The following packages have been kept back: adobe-flashplugin bind9-host dnsutils gvfs gvfs-backends gvfs-fuse libatm1 libbind9-30 libgvfscommon0 libisccc30 libisccfg30 liblwres30 libnautilus-extension1 linux-headers-2.6.24-24 linux-headers-2.6.24-24-generic linux-image-2.6.24-24-generic nautilus nautilus-data The following NEW packages will be installed: libgmp3c2 libmpfr1ldbl The following packages will be upgraded: build-essential The following partially installed packages will be configured: timidity 2 packages upgraded, 4 newly installed, 0 to remove and 24 not upgraded. Need to get 775kB/6265kB of archives. After unpacking 20.3MB will be used. The following packages have unmet dependencies: libstdc++6-4.3-dev: Depends: gcc-4.3-base (= 4.3.2-1ubuntu11) which is a virtual package. Depends: libstdc++6 (>= 4.3.2-1ubuntu11) but 4.2.4-1ubuntu4 is installed. g++-4.3: Depends: gcc-4.3-base (= 4.3.2-1ubuntu11) which is a virtual package. Depends: gcc-4.3 (= 4.3.2-1ubuntu11) which is a virtual package. Depends: libc6 (>= 2.8~20080505) but 2.7-10ubuntu4 is installed. g++: Depends: cpp (>= 4:4.3.1-1ubuntu2) but 4:4.2.3-1ubuntu6 is installed. Depends: gcc (>= 4:4.3.1-1ubuntu2) but 4:4.2.3-1ubuntu6 is installed. Depends: gcc-4.3 (>= 4.3.1-1) which is a virtual package. Resolving dependencies... The following actions will resolve these dependencies: Keep the following packages at their current version: build-essential [11.3ubuntu1 (hardy, now)] g++ [4:4.2.3-1ubuntu6 (hardy-updates, now)] g++-4.3 [Not Installed] libstdc++6-4.3-dev [Not Installed] Score is -9852 Accept this solution? [Y/n/q/?]

  Read the article

• Can't connect back to the wireless network after the password was changed

  - by 7777

  Family changed the network password and some other network settings after new computers were brought into the house because apparently they wouldn't work with what we had. Actually an off-site tech remotely changed it, and I have no idea what he did. My laptop detects the network (it shows up under available networks) but whenever I try to connect it says: Windows is unable to connect to the selected network. The network may no longer be in range. Please refresh the list of available networks, and try to connect again. I wish I could give more details, config settings, but frankly I have no idea what I'm looking for. This is XP (also, not a password issue, I know the password, it's just that I have no idea where to enter it, etc.)

  Read the article

• Terrible Performance with SATA Drives on Dell PowerEdge, steps to troubleshoot?

  - by Tom

  I had asked this question earlier and the question went missing so here it is again. Bought a DELL Poweredge 2950 to use as in-house QA Server. Disk performance is beyond terrible, 1000-4000 ms response time on the drive with our SQL Server database .mdf. Sql Server disk queue upwards of 300 at times. I'm a software guy, can anyone help me with steps to determine the issue? I don't know what RAID controller it has, how can I determine that? I'm speculating it could be BIOS issue. Perhaps the server used to have another kind of drive in it and when I added SATA the ??? buffer size is wrong??? Perhaps I chose wrong options (chose defaults) when setting up the RAID 1 arrays? I thought RAID 1 was a performance array?

  Read the article

• Migrating to LDAP

  - by Frank Brenner

  Hi Folks, I've started a new job at a house where they've got an amazingly unruly patchwork of Linux, xBSD, and OpenSolaris boxes. Every box has its own user auth using local /etc/passwd, etc. Users/Groups have differing uids/gids on each machine, and each machine has its own /home/ tree. (no central NAS /homes) My job is get get everything into an LDAP directory and use that for login auth. How do I get LDAP to deal with the differing uids/gids? Thanks.

  Read the article

• My laptop can connect to every wireless network except fios

  - by going crazy

  I have always been able to connect to every wireless router secured or unsecured wep or wpa. I had Fios installed and could not connect. Verizon suggested it was my computer and gave me an outside wirless drive to use, it worked. I got rid of fios and went back to comcast and threw out the drive, but now 2 years later, I am sitting at my friends house haveing the same problem. My tech savy friend told me it is a firewall setting or something in my antivirus software, but I disabled them both and still nothing works........Funny it is only FIOS

  Read the article

• Where are Wireless Profiles stored in Ubuntu

  - by LonnieBest

  Where does Ubuntu store profiles that allow it to remember the credentials to private wireless networks that it has previously authenticate to and used? I just replaced my Uncle's hard drive with a new one and installed Ubuntu 10.04 on it (he had Ubuntu 9.10 on his old hard drive. He is at my house right now, and I want him to be able to access his private wireless network when he gets home. Usually, when I upgrade Ubuntu, I have his /home directory on another partition, so his wireless profile to his own network persists. However, right now, I'm trying to figure out which .folder I need to copy from his /home/user folder on the old hard drive, to the new hard drive, so that he will be able to have wireless Internet when he gets home. Does anyone know with certainty, exactly which folder I need to copy to the new hard drive to achieve this?

  Read the article

• Copying files from Public folder to C: takes a minute, even though they are same hard drive and same

  - by Jian Lin

  I have a big file, like 2GB, and would like to copy it from Network -> Bookroom -> Users -> Public (this is the computer in the bookroom in the house) to c:\myfiles and they are actually on the SAME hard drive (and same partition). But copying still takes a minute or so? I thought if on the same hard drive and partition, then it is a "move" and it should take 2, 3 seconds only. that public folder also is \\Bookroom\Users\Public

  Read the article

• How to make a server check it's own availability on the web?

  - by Javawag

  Hi all, Just a quick question – my server is running at my house serving www pages at www.javawag.com. The problem is that my home internet connection keeps dropping randomly - for about 10 mins at a time. This is only an intermittent problem and will go away soon I hope. However, my server doesn't recover properly - when the connection comes back, I can still access it at 192.168.0.8 (locally) without any issue, but at www.javawag.com there's no reply! (Just an aside - my home internet connection is dynamic ISP, the domain www.javawag.com points to javawag.dyndns.org which in turn points to my IP, updated every minute by ddclient on the server) Is there some way for the server to check if it's accessible from the outside world periodically, and if not restart Apache/reboot? Oh, and if I reboot the problem fixes itself also! Javawag

  Read the article

• Wi-fi signal with keeping the internet cable

  - by daGrevis

  So the situation is that I have Ethernet cable which provides internet to my computer. Thing I want is to have wi-fi connection in my house and Ethernet cable (like I have before) to use for my PC. I will use wi-fi for my laptop and mobile phone. I think I need router for that and I'm looking at Asus RT-N16 (suggested in Coding Horror) for it, but I am not sure. Is it the right thing for me and I will be able to get wi-fi signal and keep the Ethernet cable? I guess the system will be that current cable goes into router, router provides wi-fi signal and gives back new cable... or something like that. Thanks in any advice! And sorry if topic isn't in right site.

  Read the article

• Bridging two connections in windows 7

  - by Serban Razvan

  I have recently bought an Samsung UE32ES5500 and I want to connect it to the internet. Not wanting to buy an expensive Samsung wireless adapter for the TV, I've decided to use an ethernet cable. Because the Internet cable passes through underground to the bedroom and the TV is located in the living room, i decided to put a router in the bedroom, and receive it's signal in the living room using a windows 7 laptop. Afterwards I connected the laptop to the TV through an ethernet cable, and bridged the two connections in Network Connections in Control Panel on the laptop. The TV successfully finds the laptop (and the router I think) but still cannot connect to the internet. Does anyone knows a solution to this problem? (the connections must be bridged because I want to have only one network in the house)

  Read the article

< Previous Page | 70 71 72 73 74 75 76 77 78 79 80 81  | Next Page >