Search Results

Search found 9398 results on 376 pages for 'matt dev'.

Page 74/376 | < Previous Page | 70 71 72 73 74 75 76 77 78 79 80 81  | Next Page >

• Unable to ping between subnets and out to internet

  - by battlemidget

  My setup is Modem - Linksys router - Laptop with 2 devices (wlan0/eth0) - desktop machine Router is 192.168.1.1 gateway to the internet Laptop wlan0 is 192.168.1.4 with a gw of 192.168.1.1 Laptop eth0 is 192.168.2.254 which acts as a second gateway desktop is 192.168.2.100 On laptop i've setup ip_forward to 1, and have inserted 2 iptables rules -A FORWARD -i eth0 -o wlan0 -j ACCEPT -A FORWARD -i wlan0 -o eth0 -j ACCEPT The laptop can ping outside the network (i,e, yahoo.com) it can not ping 192.168.2.100. The desktop can ping 192.168.2.254 but nothing outside the network or 192.168.1.0 subnet. On laptop ip route show lists: 192.168.2.0/24 dev eth0 proto kernel scope link src 192.168.2.254 192.168.1.0/24 dev wlan0 proto kernel scope link src 192.168.1.4 127.0.0.0/8 dev lo scope link default via 192.168.1.1 dev wlan0 What am I missing to make my desktop go through the laptop in order to access the router which provides access to the internet? Thanks

  Read the article

• OpenVPN + iptables / NAT routing

  - by Mikeage

  I'm trying to set up an OpenVPN VPN, which will carry some (but not all) traffic from the clients to the internet via the OpenVPN server. My OpenVPN server has a public IP on eth0, and is using tap0 to create a local network, 192.168.2.x. I have a client which connects from local IP 192.168.1.101 and gets VPN IP 192.168.2.3. On the server, I ran: iptables -A INPUT -i tap+ -j ACCEPT iptables -A FORWARD -i tap+ -j ACCEPT iptables -t nat -A POSTROUTING -s 192.168.2.0/24 -o eth0 -j MASQUERADE On the client, the default remains to route via 192.168.1.1. In order to point it to 192.168.2.1 for HTTP, I ran ip rule add fwmark 0x50 table 200 ip route add table 200 default via 192.168.2.1 iptables -t mangle -A OUTPUT -j MARK -p tcp --dport 80 --set-mark 80 Now, if I try accessing a website on the client (say, wget google.com), it just hangs there. On the server, I can see $ sudo tcpdump -n -i tap0 tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on tap0, link-type EN10MB (Ethernet), capture size 96 bytes 05:39:07.928358 IP 192.168.1.101.34941 > 74.125.67.100.80: S 4254520618:4254520618(0) win 5840 <mss 1334,sackOK,timestamp 558838 0,nop,wscale 5> 05:39:10.751921 IP 192.168.1.101.34941 > 74.125.67.100.80: S 4254520618:4254520618(0) win 5840 <mss 1334,sackOK,timestamp 559588 0,nop,wscale 5> Where 74.125.67.100 is the IP it gets for google.com . Why isn't the MASQUERADE working? More precisely, I see that the source showing up as 192.168.1.101 -- shouldn't there be something to indicate that it came from the VPN? Edit: Some routes [from the client] $ ip route show table main 192.168.2.0/24 dev tap0 proto kernel scope link src 192.168.2.4 192.168.1.0/24 dev wlan0 proto kernel scope link src 192.168.1.101 metric 2 169.254.0.0/16 dev wlan0 scope link metric 1000 default via 192.168.1.1 dev wlan0 proto static $ ip route show table 200 default via 192.168.2.1 dev tap0

  Read the article

• Setting up a subdomain on IIS7

  - by EvanGWatkins

  I have a dev server for my C# Web Application and to access the dev site I go to the server name in my browser (lfi-fsxmv06) and I can access my web application. Now I want to set up a subdomain of that (test.lfi-fsxmv06) is this possible? My bindings on the dev site (lfi-fsxmv06) are http with port 80 and ip address *, and the hostname is blank. My bindings on the subdomain site are http, port 80, IP adddress *, and the hostname is test.lfi-fsxmv06 however if I try t

  Read the article

• How do you get autofs and updatedb to work together?

  - by Veek.M

  /etc/my.misc sda1 -fstype=ntfs,user,exec :/dev/sda1 sda3 -fstype=ntfs,user,exec :/dev/sda3 sda4 -fstype=ntfs,user,exec :/dev/sda4 /etc/auto.master /my /etc/my.misc --ghost When I run locate .pdf, I get nothing because though the mount points (sda1, sda2, ..) are created in /my - there's nothing in them till I access them. Unfortunately this is not good enough for updatedb and it purges its cache of /my/sdaX files. How do I prevent/solve this problem?

  Read the article

• Linux missing disk space

  - by cpt.Buggy

  I have KVM vps with strange disk usage: # df -h Filesystem Size Used Avail Use% Mounted on /dev/sdb 493G 1.2G 466G 1% / tmpfs 4.0G 0 4.0G 0% /dev/shm /dev/sda1 96M 41M 51M 45% /boot # du -sh / du: cannot access `/proc/1633/task/1633/fd/4': No such file or directory du: cannot access `/proc/1633/task/1633/fdinfo/4': No such file or directory du: cannot access `/proc/1633/fd/4': No such file or directory du: cannot access `/proc/1633/fdinfo/4': No such file or directory 1021M / How could it be? Where are ~20G of free space?

  Read the article

• Does urandom share the same entropy of random?

  - by ???

  Does the entropy pool /dev/random used the same to /dev/urandom? I want to mknod /dev/random 1 9 to replace the slow random, I think the current entropy is randomly enough, if urandom is based on the same entropy, and all succeed random numbers are generated based on that entropy, I don't think there'll be any vulnerable.

  Read the article

• Boot stuck at blinking cursor before GRUB - only works via BIOS boot menu

  - by delta1

  I have a new box running Debian Squeeze. Grub is installed on /dev/sda, but when booting up I just get a blinking cursor, before the Grub menu. I can only boot to grub successfully when I choose boot options (during post) and select that specific drive! I have made sure the correct drive is set to boot first in the BIOS. So Grub works, but the system won't boot to that drive automatically? Any ideas on what could cause this? Drives sda/b/c are all 2TB (sda runs the system with b/c as raid device md0) with the following partitions: $ cat /proc/partitions major minor #blocks name 8 0 1953514584 sda 8 1 977 sda1 8 2 9765625 sda2 8 3 6445313 sda3 8 4 1937302627 sda4 8 32 1953514584 sdc 8 16 1953514584 sdb 9 0 1953513424 md0 but # fdisk -l /dev/sda gives WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sda1 1 243202 1953514583+ ee GPT Any insight into this strange behaviour would be greatly appreciated.

  Read the article

• permission not to change on eth0 file?

  - by user133916

  I am logged in as a root user i want to edit my /etc/sysconfig/network-scripts/ifcfg-eth0 file when i edit this showing -- INSERT -- W10: Warning: Changing a readonly file while i have logged in as root user my mount showing [root@s1202 ~]# mount rootfs on / type rootfs (rw) /dev/root on / type ext3 (ro,data=ordered) /dev on /dev type tmpfs (rw) /proc on /proc type proc (rw) /sys on /sys type sysfs (rw) /proc/bus/usb on /proc/bus/usb type usbfs (rw)

  Read the article

• Unix bidirectional pipe on commandline

  - by John W

  I've been able to use this linux command to connect Netcat to a serial port: nc -l 80 <> /dev/ttyS0 I would like to be able to log this transaction. My backup plan is to use Wireshark to monitor the netcat stream, but ideally I'd like to do something like this: cat /dev/ttyS0 | tee upstream.bin | nc -l 80| tee downstream.bin | /dev/ttyS0 This tries to open ttyS0 twice and therefore throws a permissions error. Does anyone know a smarter way to do this?

  Read the article

• ec2-user password for running sudo -H -u

  - by bool.dev

  I have to run this command to initialize gitosis: sudo -H -u git gitosis-init < /home/ec2-user/id_rsa.pub But that asks me for a password for ec2-user: $ sudo -H -u git gitosis-init < id_rsa.pub [sudo] password for ec2-user: I do not have a password as i use the default .pem key file to login. I know i can probably login as the git user and do this, but is there any other way? Update: Using Linux AMI 12.09 (micro-instance), in region us-east-1 (N. Virginia)

  Read the article

• What does 'Can't sync file './database_name/…frm' to disk (Errcode: 28)' mean?

  - by cool_cs

  I am getting this error message whenever I try to create a new index or a new table in my mysql server. Does anyone know what the reason is? This is the ouput after I run df -a Filesystem Size Used Avail Use% Mounted on /dev/sda2 13G 7.3G 4.5G 63% / /dev/sda1 251M 27M 212M 12% /boot tmpfs 3.9G 0 3.9G 0% /dev/shm 10.156.248.29:/vol/pharos_pnxd_data_01/env_empty_sbid_27133_qdcprod 30G 30G 32K 100% /app

  Read the article

• how do I determine how much VRAM is in the system?

  - by Cocoa Dev

  I just bought a Samsung Series 7 laptop but I have no idea how much VRAM the graphics card has. This is an NVIDIA OPTIMUS card. I am using Windows 7 and will upgrade to 8 within the hour. I switched from Mac to PC. So its not familiar to me. I am sorry that you guys know where to look and think this question is very trivial. Someone is selling me his laptop and claims it has 1GB VRAM. The stock # says it should have 512MB and I wanted to verify these details.

  Read the article

• Shrinking windows and recovery partitions on the samsung new series 9

  - by bobbaluba

  I just bought a samsung NP900X3C, and as I was going to install linux, I noticed the windows partitions and recovery partitions occupied a major portion of the disk. The disk is a 128 GB SSD, and I want to keep the windows partition in order to play some games once in a while, but the windows disk is already 45GB full (with no installed programs) and the recovery partition is 20GB. That leaves under 60 GB for linux, which is not optimal, since that is what I'm going to be using most of the time, and there would be no room for games on the windows partition. There are also two small partitions that I don't know what are doing, one 100mb at the start of the disk that I'm guessing is some kind of boot partition, and one 5GB, that is described as an OS/2 hidden C: drive What I'm wondering is: can i delete the recovery partition? What about the mystical 5gb partition? Here is what fdisk reports: ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/sda: 128.0 GB, 128035676160 bytes 255 heads, 63 sectors/track, 15566 cylinders, total 250069680 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x83953ffc Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 198273023 99033088 7 HPFS/NTFS/exFAT /dev/sda3 198273024 207276031 4501504 84 OS/2 hidden C: drive /dev/sda4 207276032 250068991 21396480 27 Hidden NTFS WinRE

  Read the article

• Why does changing a truecrypt password take such a long time?

  - by Alex

  I am changing the password of a truecrypt file container. This takes around 1 minute. Why? time truecrypt --text --change /tmp/user1.tc --keyfiles= --new-keyfiles= --password=known --new-password=known --random-source=/dev/null" If I use strace I see that it basically does not do anything: it simply reads lots of random data from /dev/urandom (even if i specified /dev/null as random source) and finally changes the password: open("/dev/urandom", O_RDONLY) = 6 read(6, "\36&{\351\212\212\343\202\34\313\242\312I\326\235\245\224\300\354O)\270Q\200 \201J\227\224\311_\212\367"..., 640) = 640 close(6) = 0

  Read the article

• How do I re-configure grub options

  - by Ash

  I've searched this topic and I can't find an article with a plausable solution, to my problem. I installed windows 7 first, with 100gb of disk space. I created the necessary partitions via windows. Then I installed Ubuntu 12.04 on the remaining 400gb of disk space. During the Ubuntu installation I installed the ubuntu boot loader on /dev/sda3 which Windows (as expected never granted me the option pre-boot for which OS I wanted to boot). So I re-installed Ubuntu on that /dev/sda3 partition, overriding the windows 7 loader. Now when I boot windows 7, it runs GNU Grub, so like an infinite loop. How can I reconfigure grub to say: /dev/sda is the bootloader. /dev/sda2 is Windows. /dev/sda3 is Ubuntu. Re-installing windows and my partitions isn't an option, purchasing software for windows isn't an option (theres a reason I use linux, it's not because it's free, because you don't have to install lots of shit to get stuff working, and over-all it's a robust OS).

  Read the article

• Block a Server from reaching a machine

  - by user

  I have a Windows 2003 server that I want to block from accessing a specific IP address. I want to control this from the Server. because I control the machine. The traffic is http traffic (webservice call). It uses a non-standard port, so IP address+ Port combination would also work. Background: I have a development enviornment that for some reason is ignoring host file enteries under some circumstances. These host files point the enviornment at services in another Dev enviornment. Wne th host files are ignored, dev is talking to production. This is not my question, rather the motivation for this inquiry. I want is a failsafe to ensure dev will error instead of happily engaging in transactions with production. I control the dev server, I do not control the firewalls or the target production machine.

  Read the article

• Setup SSH key per user for Git access

  - by ThatGuyJJ

  I'm setting up a site that will have multiple development instances running on the same server. Essentially, we'd have dev-a.whatever.com, dev-b.whatever.com, etc.. all running off a single server. I want to give each user some bit of SSH access in order to update and check in code from our Git repository and to manage files via SFTP. However, I want to restrict each user to their own site as well. So if you have access to dev-a.whatever.com, you don't also have access to dev-b.whatever.com and so on. The restriction is already in place if I login via FTP as a certain user, I can't navigate outside my own site -- but if I grant SSH access to that account I can immediately navigate to any file on the server in SFTP. Is RSSH part of the solution? And how can I assign the correct SSH pub key to the corresponding user? We're using BeanStalk for our Git repository management if that makes any impact.

  Read the article

• Server refuses to boot when Raid5 disk is disconnected - /root/ missing

  - by Ronni

  I recently set up a NAS server running a Debian OS (6.0.4) It contains 4 disks, 3 of them are in a Raid5 array, while the last one is used for the OS. To simulate a disk-failure I unplugged one of the raid disks, which resulted in the OS being unable to boot. It started the boot, recognized that md0 (the raid array) was running on 2/3 disks, and then threw a few errors. It was unable to find the following directories: /dev/root on /root, /dev on /root/dev, /sys on /root/sys, /proc on /root/proc It appears this happens regardless of which raid disk is removed. These directories are supposed to be on /dev/sdd my system disk. Output from fstab and blkid : http://dl.dropbox.com/u/6017799/NASOutput.txt If you need additional info, please let me know.

  Read the article

• How do I load external images into Excel? [duplicate]

  - by Cocoa Dev

  This question already has an answer here: Inserting a (jpg) picture into a cell in Microsoft Excel 2007 1 answer I have a table with a column of links (URLs) to images. I want to load the linked images into the next cell over. For example: A1 contains http://example.com/image.jpg I want to load the image in B1. How can I do it?

  Read the article

• jaas authentication using jetty and gwt

  - by dubreakkk

  Hello, I am trying to use JAAS to authenticate my users. My project is in GWT v2, which runs jetty. I use eclipse for development. From http://code.google.com/p/google-web-toolkit/issues/detail?id=4462 I found out that jetty doesn't like any realm definitions in web.xml, so I moved them to jetty-web.xml. I keep getting ClassNotFound exceptions so I followed the advice here: communitymapbuilder.org/display/JETTY/Problems+with+JAAS+in+Jetty+6.0.0 However, I am still getting ClassNotFoundExceptionsHere in my jetty-web.xml file. How do I configure jetty to work jaas in GWT projects? My jetty-web.xml file: <Configure class="org.mortbay.jetty.webapp.WebAppContext"> <Set name="serverClasses"> <Array type="java.lang.String"> <Item>-org.mortbay.jetty.plus.jaas.</Item> <Item>org.mortbay.jetty</Item> <Item>org.slf4j.</Item> </Array> </Set> <Get name="securityHandler"> <Set name="userRealm"> <New class="org.mortbay.jetty.plus.jaas.JAASUserRealm"> <Set name="name">xyzrealm</Set> <Set name="LoginModuleName">xyz</Set> <Set name="config"><SystemProperty name="jetty.home" default="."/>/WEB-INF/classes/jdbcRealm.properties</Set> </New> </Set> <Set name="authenticator"> <New class="org.mortbay.jetty.security.FormAuthenticator"> <Set name="loginPage">/login.jsp</Set> <Set name="errorPage">/error.jsp</Set> </New> </Set> </Get> Error I am receiving: [WARN] Failed startup of context com.google.gwt.dev.shell.jetty.JettyLauncher$WebAppContextWithReload@1fcef4f7{/,/home/dev/workspace/project/war} java.lang.ClassNotFoundException: org.mortbay.jetty.plus.jaas.JAASUserRealm at java.lang.ClassLoader.findClass(ClassLoader.java:359) at java.lang.ClassLoader.loadClass(ClassLoader.java:307) at java.lang.ClassLoader.loadClass(ClassLoader.java:248) at org.mortbay.jetty.webapp.WebAppClassLoader.loadClass(WebAppClassLoader.java:352) at org.mortbay.jetty.webapp.WebAppClassLoader.loadClass(WebAppClassLoader.java:337) at org.mortbay.util.Loader.loadClass(Loader.java:91) at org.mortbay.xml.XmlConfiguration.nodeClass(XmlConfiguration.java:216) at org.mortbay.xml.XmlConfiguration.newObj(XmlConfiguration.java:564) at org.mortbay.xml.XmlConfiguration.itemValue(XmlConfiguration.java:907) at org.mortbay.xml.XmlConfiguration.value(XmlConfiguration.java:829) at org.mortbay.xml.XmlConfiguration.set(XmlConfiguration.java:278) at org.mortbay.xml.XmlConfiguration.configure(XmlConfiguration.java:240) at org.mortbay.xml.XmlConfiguration.get(XmlConfiguration.java:460) at org.mortbay.xml.XmlConfiguration.configure(XmlConfiguration.java:246) at org.mortbay.xml.XmlConfiguration.configure(XmlConfiguration.java:182) at org.mortbay.jetty.webapp.JettyWebXmlConfiguration.configureWebApp(JettyWebXmlConfiguration.java:109) at org.mortbay.jetty.webapp.WebAppContext.startContext(WebAppContext.java:1217) at org.mortbay.jetty.handler.ContextHandler.doStart(ContextHandler.java:513) at org.mortbay.jetty.webapp.WebAppContext.doStart(WebAppContext.java:448) at com.google.gwt.dev.shell.jetty.JettyLauncher$WebAppContextWithReload.doStart(JettyLauncher.java:447) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:39) at org.mortbay.jetty.handler.HandlerWrapper.doStart(HandlerWrapper.java:130) at org.mortbay.jetty.handler.RequestLogHandler.doStart(RequestLogHandler.java:115) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:39) at org.mortbay.jetty.handler.HandlerWrapper.doStart(HandlerWrapper.java:130) at org.mortbay.jetty.Server.doStart(Server.java:222) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:39) at com.google.gwt.dev.shell.jetty.JettyLauncher.start(JettyLauncher.java:543) at com.google.gwt.dev.DevMode.doStartUpServer(DevMode.java:421) at com.google.gwt.dev.DevModeBase.startUp(DevModeBase.java:1035) at com.google.gwt.dev.DevModeBase.run(DevModeBase.java:783) at com.google.gwt.dev.DevMode.main(DevMode.java:275)

  Read the article

• Problem using form builder & DOM manipulation in Rails with multiple levels of nested partials

  - by Chris Hart

  I'm having a problem using nested partials with dynamic form builder code (from the "complex form example" code on github) in Rails. I have my top level view "new" (where I attempt to generate the template): <% form_for (@transaction_group) do |txngroup_form| %> <%= txngroup_form.error_messages %> <% content_for :jstemplates do -%> <%= "var transaction='#{generate_template(txngroup_form, :transactions)}'" %> <% end -%> <%= render :partial => 'transaction_group', :locals => { :f => txngroup_form, :txn_group => @transaction_group }%> <% end -%> This renders the transaction_group partial: <div class="content"> <% logger.debug "in partial, class name = " + txn_group.class.name %> <% f.fields_for txn_group.transactions do |txn_form| %> <table id="transactions" class="form"> <tr class="header"><td>Price</td><td>Quantity</td></tr> <%= render :partial => 'transaction', :locals => { :tf => txn_form } %> </table> <% end %> <div>&nbsp;</div><div id="container"> <%= link_to 'Add a transaction', '#transaction', :class => "add_nested_item", :rel => "transactions" %> </div> <div>&nbsp;</div> ... which in turn renders the transaction partial: <tr><td><%= tf.text_field :price, :size => 5 %></td> <td><%= tf.text_field :quantity, :size => 2 %></td></tr> The generate_template code looks like this: def generate_html(form_builder, method, options = {}) options[:object] ||= form_builder.object.class.reflect_on_association(method).klass.new options[:partial] ||= method.to_s.singularize options[:form_builder_local] ||= :f form_builder.fields_for(method, options[:object], :child_index => 'NEW_RECORD') do |f| render(:partial => options[:partial], :locals => { options[:form_builder_local] => f }) end end def generate_template(form_builder, method, options = {}) escape_javascript generate_html(form_builder, method, options) end (Obviously my code is not the most elegant - I was trying to get this nested partial thing worked out first.) My problem is that I get an undefined variable exception from the transaction partial when loading the view: /Users/chris/dev/ss/app/views/transaction_groups/_transaction.html.erb:2:in _run_erb_app47views47transaction_groups47_transaction46html46erb_locals_f_object_transaction' /Users/chris/dev/ss/app/helpers/customers_helper.rb:29:in generate_html' /Users/chris/dev/ss/app/helpers/customers_helper.rb:28:in generate_html' /Users/chris/dev/ss/app/helpers/customers_helper.rb:34:in generate_template' /Users/chris/dev/ss/app/views/transaction_groups/new.html.erb:4:in _run_erb_app47views47transaction_groups47new46html46erb' /Users/chris/dev/ss/app/views/transaction_groups/new.html.erb:3:in _run_erb_app47views47transaction_groups47new46html46erb' /Users/chris/dev/ss/app/views/transaction_groups/new.html.erb:1:in _run_erb_app47views47transaction_groups47new46html46erb' /Users/chris/dev/ss/app/controllers/transaction_groups_controller.rb:17:in new' I'm pretty sure this is because the do loop for form_for hasn't executed yet (?)... I'm not sure that my approach to this problem is the best, but I haven't been able to find a better solution for dynamically adding form partials to the DOM. Basically I need a way to add records to a has_many model dynamically on a nested form. Any recommendations on a way to fix this particular problem or (even better!) a cleaner solution are appreciated. Thanks in advance. Chris

  Read the article

• VS 2010 SP1 installation error: Generic Trust Failure

  - by guybarrette

  I tried to install VS SP1 from the ISO (not the Web Installer) on a machine and ended up with a non successful install with the following error: Generic Trust Failure.   The log file said: Possible transient lock. WinVerifyTrust failed with error: 2148204800 [3/9/2011, 10:6:29]Possible transient lock. WinVerifyTrust failed with error: 2148204800 [3/9/2011, 10:6:30]C:\Dev\VSSP1\VS2010SP1\VC10sp1-KB983509-x86.msp - Signature verification for file VC10sp1-KB983509-x86.msp (C:\Dev\VSSP1\VS2010SP1\VC10sp1-KB983509-x86.msp) failed with error 0x800b0100 (No signature was present in the subject.) [3/9/2011, 10:6:30] C:\Dev\VSSP1\VS2010SP1\VC10sp1-KB983509-x86.msp Signature could not be verified for VC10sp1-KB983509-x86.msp [3/9/2011, 10:6:30]No FileHash provided. Cannot perform FileHash verification for VC10sp1-KB983509-x86.msp [3/9/2011, 10:6:30]File VC10sp1-KB983509-x86.msp (C:\Dev\VSSP1\VS2010SP1\VC10sp1-KB983509-x86.msp), failed authentication. (Error = -2146762496). It is recommended that you delete this file and retry setup again. Since I didn’t want to download the 1.5GB ISO a second time, I tried the Web installer and this time it worked like a charm.  Was the problem with a corrupt download or a file missing a signature I can’t say. var addthis_pub="guybarrette";

  Read the article

• "wrong fs type, bad option, bad superblock" error while mounting FAT Drives

  - by cshubhamrao

  I am unable to mount any fat32 or fat16 formatted usb disks under Ubuntu 13.10. The thing here to note is that it is happening only with fat formatted Disks. ntfs, ext formatted external usb disks work well (I tried formatting the same with ext4 and it worked) While mounting via nautilus: Error while mounting from terminal: root@shubham-pc:~# mount -t vfat /dev/sdc1 /media/shubham/n mount: wrong fs type, bad option, bad superblock on /dev/sdc1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so As suggested by the error: Output from dmesg | tail root@shubham-pc:~# dmesg | tail [ 3545.482598] scsi8 : usb-storage 1-1:1.0 [ 3546.481530] scsi 8:0:0:0: Direct-Access SanDisk Cruzer 1.26 PQ: 0 ANSI: 5 [ 3546.482373] sd 8:0:0:0: Attached scsi generic sg3 type 0 [ 3546.483758] sd 8:0:0:0: [sdc] 15633408 512-byte logical blocks: (8.00 GB/7.45 GiB) [ 3546.485254] sd 8:0:0:0: [sdc] Write Protect is off [ 3546.485262] sd 8:0:0:0: [sdc] Mode Sense: 43 00 00 00 [ 3546.488314] sd 8:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 3546.499820] sdc: sdc1 [ 3546.503388] sd 8:0:0:0: [sdc] Attached SCSI removable disk [ 3547.273396] FAT-fs (sdc1): IO charset iso8859-1 not found Output from fsck.vfat: root@shubham-pc:~# fsck.vfat /dev/sdc1 dosfsck 3.0.16, 01 Mar 2013, FAT32, LFN /dev/sdc1: 1 files, 1/1949978 clusters All normal Tried re-creating the whole partition table and then formatting as fat32 but to no avail so the possibility of corrupted drive is ruled out. Tried the same with around 4 Disks or so and all have the same things

  Read the article

• Restoring GRUB2 on Software RAID 0 after Windows 7 wiped it using Ubuntu 10.10 LiveCD

  - by unknownthreat

  I have installed Ubuntu 10.10 on my system. However, I need to install Windows 7 back, and I expect that it would alter GRUB and it did. Right now, my partition on my Software RAID 0 looks like this: nvidia_acajefec1 is Ubuntu 10.10 and nvidia_acajefec3 is Windows 7. I've been following some guides around and I am always stuck at GRUB not able to detect the usual RAID content. I've tried running: sudo grub > root (hd0,0) GRUB complains it couldn't find my hard disk. So I tried: find (hd0,0) And it complains that it couldn't find anything. So I tried: find /boot/grub/stage1 It said "file not found". Here's the text from the console: ubuntu@ubuntu:~$ grub Probing devices to guess BIOS drives. This may take a long time. [ Minimal BASH-like line editing is supported. For the first word, TAB lists possible command completions. Anywhere else TAB lists the possible completions of a device/filename. ] grub> root (hd0,0) root (hd0,0) Error 21: Selected disk does not exist grub> find /boot/grub/stage1 find /boot/grub/stage1 Error 15: File not found Fortunately, I got one person suggesting that what I've been trying to do is for GRUB Legacy, not GRUB2. So I went to the suggested website, ** (http://grub.enbug.org/Grub2LiveCdInstallGuide) **try to look around, and try: ubuntu@ubuntu:~$ sudo fdisk -l Unable to seek on /dev/sda This is just the step 2 of the instruction in the http://grub.enbug.org/Grub2LiveCdInstallGuide and I cannot proceed because it cannot seek /dev/sda. However, ubuntu@ubuntu:~$ sudo dmraid -r /dev/sdb: nvidia, "nvidia_acajefec", stripe, ok, 488397166 sectors, data@ 0 /dev/sda: nvidia, "nvidia_acajefec", stripe, ok, 488397166 sectors, data@ 0 So what now? Do you have an idea for how to make fdisk see my RAID array on live cd (Ubuntu 10.10)? Honestly, I am lost, very lost in trying to restore GRUB2 on this software RAID 0 system right now.

  Read the article

• How do I transition from WUBI to a native installation?

  - by Sammy Black

  I have Ubuntu 10.04 Lucid installed through wubi on my laptop (it came with Windows 7 preinstalled). This was my first foray into Linux, and I'm here to stay. I have no use for Windows, and yet I must manually choose not to boot into it! Should I shrink the Windows partition to something negligible and grow the Linux one using something like gparted or fdisk, and just be content that everything runs? In that case, I need to understand the filesystems. Which is which? Here's the output of $ df -h: Filesystem Size Used Avail Use% Mounted on /dev/loop0 17G 11G 4.5G 71% / none 1.8G 300K 1.8G 1% /dev none 1.8G 376K 1.8G 1% /dev/shm none 1.8G 316K 1.8G 1% /var/run none 1.8G 0 1.8G 0% /var/lock none 1.8G 0 1.8G 0% /lib/init/rw /dev/sda3 290G 50G 240G 18% /host I would prefer to start over with a clean install of 10.10 Maverick, but I fear what I may lose. Certainly, I will backup my home directory tree (gzip?), but what about various pieces of software that I've acquired from the repositories? Can I keep a record of them? By the way, I asked a similar question over on Ubuntu forums.

  Read the article

< Previous Page | 70 71 72 73 74 75 76 77 78 79 80 81  | Next Page >