Search Results

Search found 1967 results on 79 pages for 'round robin'.

Page 74/79 | < Previous Page | 70 71 72 73 74 75 76 77 78 79  | Next Page >

• Slicing the EDG

  - by Antony Reynolds

  Different SOA Domain Configurations In this blog entry I would like to introduce three different configurations for a SOA environment.  I have omitted load balancers and OTD/OHS as they introduce a whole new round of discussion.  For each possible deployment architecture I have identified some of the advantages. Super Domain This is a single EDG style domain for everything needed for SOA/OSB.   It extends the standard EDG slightly but otherwise assumes a single “super” domain. This is basically the SOA EDG.  I have broken out JMS servers and Coherence servers to improve scalability and reduce dependencies. Key Points Separate JMS allows those servers to be kept up separately from rest of SOA Domain, allowing JMS clients to post messages even if rest of domain is unavailable. JMS servers are only used to host application specific JMS destinations, SOA/OSB JMS destinations remain in relevant SOA/OSB managed servers. Separate Coherence servers allow OSB cache to be offloaded from OSB servers. Use of Coherence by other components as a shared infrastructure data grid service. Coherence cluster may be managed by WLS but more likely run as a standalone Coherence cluster. Benefits Single Administration Point (1 Admin Server) Closely follows EDG with addition of application specific JMS servers and standalone Coherence servers for OSB caching and application specific caches. Coherence grid can be scaled independent of OSB/SOA. JMS queues provide for inter-application communication. Drawbacks Patching is an all or nothing affair. Startup time for SOA may be slow if large number of composites deployed. Multiple Domains This extends the EDG into multiple domains, allowing separate management and update of these domains.  I see this type of configuration quite often with customers, although some don't have OWSM, others don't have separate Coherence etc. SOA & BAM are kept in the same domain as little benefit is obtained by separating them. Key Points Separate JMS allows those servers to be kept up separately from rest of SOA Domain, allowing JMS clients to post messages even if other domains are unavailable. JMS servers are only used to host application specific JMS destinations, SOA/OSB JMS destinations remain in relevant SOA/OSB managed servers. Separate Coherence servers allow OSB cache to be offloaded from OSB servers. Use of Coherence by other components as a shared infrastructure data grid service. Coherence cluster may be managed by WLS but more likely run as a standalone Coherence cluster. Benefits Follows EDG but in separate domains and with addition of application specific JMS servers and standalone Coherence servers for OSB caching and application specific caches. Coherence grid can be scaled independent of OSB/SOA. JMS queues provide for inter-application communication. Patch lifecycle of OSB/SOA/JMS are no longer lock stepped. JMS may be kept running independently of other domains allowing applications to insert messages fro later consumption by SOA/OSB. OSB may be kept running independent of other domains, allowing service virtualization to continue independent of other domains availability. All domains use same OWSM policy store (MDS-WSM). Drawbacks Multiple domains to manage and configure. Multiple Admin servers (single view requires use of Grid Control) Multiple Admin servers/WSM clusters waste resources. Additional homes needed to enjoy benefits of separate patching. Cross domain trust needs setting up to simplify cross domain interactions. Startup time for SOA may be slow if large number of composites deployed. Shared Service Environment This model extends the previous multiple domain arrangement to provide a true shared service environment.This extends the previous model by allowing multiple additional SOA domains and/or other domains to take advantage of the shared services.  Only one non-shared domain is shown, but there could be multiple, allowing groups of applications to share patching independent of other application groups. Key Points Separate JMS allows those servers to be kept up separately from rest of SOA Domain, allowing JMS clients to post messages even if other domains are unavailable. JMS servers are only used to host application specific JMS destinations, SOA/OSB JMS destinations remain in relevant SOA/OSB managed servers. Separate Coherence servers allow OSB cache to be offloaded from OSB servers. Use of Coherence by other components as a shared infrastructure data grid service Coherence cluster may be managed by WLS but more likely run as a standalone Coherence cluster. Shared SOA Domain hosts Human Workflow Tasks BAM Common "utility" composites Single OSB domain provides "Enterprise Service Bus" All domains use same OWSM policy store (MDS-WSM) Benefits Follows EDG but in separate domains and with addition of application specific JMS servers and standalone Coherence servers for OSB caching and application specific caches. Coherence grid can be scaled independent of OSB/SOA. JMS queues provide for inter-application communication. Patch lifecycle of OSB/SOA/JMS are no longer lock stepped. JMS may be kept running independently of other domains allowing applications to insert messages fro later consumption by SOA/OSB. OSB may be kept running independent of other domains, allowing service virtualization to continue independent of other domains availability. All domains use same OWSM policy store (MDS-WSM). Supports large numbers of deployed composites in multiple domains. Single URL for Human Workflow end users. Single URL for BAM end users. Drawbacks Multiple domains to manage and configure. Multiple Admin servers (single view requires use of Grid Control) Multiple Admin servers/WSM clusters waste resources. Additional homes needed to enjoy benefits of separate patching. Cross domain trust needs setting up to simplify cross domain interactions. Human Workflow needs to be specially configured to point to shared services domain. Summary The alternatives in this blog allow for patching to have different impacts, depending on the model chosen.  Each organization must decide the tradeoffs for itself.  One extreme is to go for the shared services model and have one domain per SOA application.  This requires a lot of administration of the multiple domains.  The other extreme is to have a single super domain.  This makes the entire enterprise susceptible to an outage at the same time due to patching or other domain level changes.  Hopefully this blog will help your organization choose the right model for you.

  Read the article

• ANTS CLR and Memory Profiler In Depth Review (Part 2 of 2 &ndash; Memory Profiler)

  - by ToStringTheory

  One of the things that people might not know about me, is my obsession to make my code as efficient as possible. Many people might not realize how much of a task or undertaking that this might be, but it is surely a task as monumental as climbing Mount Everest, except this time it is a challenge for the mind… In trying to make code efficient, there are many different factors that play a part – size of project or solution, tiers, language used, experience and training of the programmer, technologies used, maintainability of the code – the list can go on for quite some time. I spend quite a bit of time when developing trying to determine what is the best way to implement a feature to accomplish the efficiency that I look to achieve. One program that I have recently come to learn about – Red Gate ANTS Performance (CLR) and Memory profiler gives me tools to accomplish that job more efficiently as well. In this review, I am going to cover some of the features of the ANTS memory profiler set by compiling some hideous example code to test against. Notice As a member of the Geeks With Blogs Influencers program, one of the perks is the ability to review products, in exchange for a free license to the program. I have not let this affect my opinions of the product in any way, and Red Gate nor Geeks With Blogs has tried to influence my opinion regarding this product in any way. Introduction – Part 2 In my last post, I reviewed the feature packed Red Gate ANTS Performance Profiler.  Separate from the Red Gate Performance Profiler is the Red Gate ANTS Memory Profiler – a simple, easy to use utility for checking how your application is handling memory management…  A tool that I wish I had had many times in the past.  This post will be focusing on the ANTS Memory Profiler and its tool set. The memory profiler has a large assortment of features just like the Performance Profiler, with the new session looking nearly exactly alike: ANTS Memory Profiler Memory profiling is not something that I have to do very often…  In the past, the few cases I’ve had to find a memory leak in an application I have usually just had to trace the code of the operations being performed to look for oddities…  Sadly, I have come across more undisposed/non-using’ed IDisposable objects, usually from ADO.Net than I would like to ever see.  Support is not fun, however using ANTS Memory Profiler makes this task easier.  For this round of testing, I am going to use the same code from my previous example, using the WPF application. This time, I will choose the ‘Profile Memory’ option from the ANTS menu in Visual Studio, which launches the solution in its currently configured state/start-up project, and then launches the ANTS Memory Profiler to help.  It prepopulates all of the fields with the current project information, and all I have to do is select the ‘Start Profiling’ option. When the window comes up, it is actually quite barren, just giving ideas on how to work the profiler.  You start by getting to the point in your application that you want to profile, and then taking a ‘Memory Snapshot’.  This performs a full garbage collection, and snapshots the managed heap.  Using the same WPF app as before, I will go ahead and take a snapshot now. As you can see, ANTS is already giving me lots of information regarding the snapshot, however this is just a snapshot.  The whole point of the profiler is to perform an action, usually one where a memory problem is being noticed, and then take another snapshot and perform a diff between them to see what has changed.  I am going to go ahead and generate 5000 primes, and then take another snapshot: As you can see, ANTS is already giving me a lot of new information about this snapshot compared to the last.  Information such as difference in memory usage, fragmentation, class usage, etc…  If you take more snapshots, you can use the dropdown at the top to set your actual comparison snapshots. If you beneath the timeline, you will see a breadcrumb trail showing how best to approach profiling memory using ANTS.  When you first do the comparison, you start on the Summary screen.  You can either use the charts at the bottom, or switch to the class list screen to get to the next step.  Here is the class list screen: As you can see, it lists information about all of the instances between the snapshots, as well as at the bottom giving you a way to filter by telling ANTS what your problem is.  I am going to go ahead and select the Int16[] to look at the Instance Categorizer Using the instance categorizer, you can travel backwards to see where all of the instances are coming from.  It may be hard to see in this image, but hopefully the lightbox (click on it) will help: I can see that all of these instances are rooted to the application through the UI TextBlock control.  This image will probably be even harder to see, however using the ‘Instance Retention Graph’, you can trace an objects memory inheritance up the chain to see its roots as well.  This is a simple example, as this is simply a known element.  Usually you would be profiling an actual problem, and comparing those differences.  I know in the past, I have spotted a problem where a new context was created per page load, and it was rooted into the application through an event.  As the application began to grow, performance and reliability problems started to emerge.  A tool like this would have been a great way to identify the problem quickly. Overview Overall, I think that the Red Gate ANTS Memory Profiler is a great utility for debugging those pesky leaks.  3 Biggest Pros: Easy to use interface with lots of options for configuring profiling session Intuitive and helpful interface for drilling down from summary, to instance, to root graphs ANTS provides an API for controlling the profiler. Not many options, but still helpful. 2 Biggest Cons: Inability to automatically snapshot the memory by interval Lack of complete integration with Visual Studio via an extension panel Ratings Ease of Use (9/10) – I really do believe that they have brought simplicity to the once difficult task of memory profiling.  I especially liked how it stepped you further into the drilldown by directing you towards the best options. Effectiveness (10/10) – I believe that the profiler does EXACTLY what it purports to do.  Features (7/10) – A really great set of features all around in the application, however, I would like to see some ability for automatically triggering snapshots based on intervals or framework level items such as events. Customer Service (10/10) – My entire experience with Red Gate personnel has been nothing but good.  their people are friendly, helpful, and happy! UI / UX (9/10) – The interface is very easy to get around, and all of the options are easy to find.  With a little bit of poking around, you’ll be optimizing Hello World in no time flat! Overall (9/10) – Overall, I am happy with the Memory Profiler and its features, as well as with the service I received when working with the Red Gate personnel.  Thank you for reading up to here, or skipping ahead – I told you it would be shorter!  Please, if you do try the product, drop me a message and let me know what you think!  I would love to hear any opinions you may have on the product. Code Feel free to download the code I used above – download via DropBox

  Read the article

• Where am I going wrong in my Xml Schema?

  - by chobo2

  Hi I am trying to make a XML Schema but everytime I use it and try to validate my data I get an error. I get this error: Validation of the XML Document failed! Error message(s): Could not find schema information for the element 'Email'. Line: 1 Column:1213 http://www.xmlforasp.net/SchemaValidator.aspx My Xml file I am trying to validate. <?xml version="1.0" encoding="utf-8" ?> <School> <SchoolPrefix>BCIT</SchoolPrefix> <TeacherAccounts> <Account> <StudentNumber>A00140000</StudentNumber> <Password>123456</Password> <Email>[email protected]</Email> </Account> <Account> <StudentNumber>A00000041</StudentNumber> <Password>1234567</Password> <Email>[email protected]</Email> </Account> <Account> <StudentNumber>A0400100</StudentNumber> <Password>1234567</Password> <Email>[email protected]</Email> </Account> </TeacherAccounts> <FullTimeAccounts> <Account> <StudentNumber>A00000000</StudentNumber> <Password>1234567</Password> <Email>[email protected]</Email> </Account> <Account> <StudentNumber>A00141000</StudentNumber> <Password>1234567</Password> <Email>[email protected]</Email> </Account> </FullTimeAccounts> <PartTimeAccounts> <Account> <StudentNumber>A81020409</StudentNumber> <Password>1234567</Password> <Email>[email protected]</Email> </Account> <Account> <StudentNumber>A040014000</StudentNumber> <Password>1234567</Password> <Email>[email protected]</Email> </Account> <Account> <StudentNumber>A00024040</StudentNumber> <Password>1234567</Password> <Email>[email protected]</Email> </Account> <Account> <StudentNumber>A00004101</StudentNumber> <Password>1234567</Password> <Email>[email protected]</Email> </Account> </PartTimeAccounts> </School> XMl Schema <?xml version="1.0" encoding="utf-8"?> <xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" targetNamespace="http://www.nothing.com" xmlns="http://www.nothing.com" elementFormDefault="qualified"> <xs:element name="School"> <xs:complexType> <xs:sequence> <xs:element name="SchoolPrefix" minOccurs="1" maxOccurs="1"> <xs:simpleType> <xs:restriction base="xs:string"> <xs:minLength value="2" /> <xs:maxLength value="8" /> </xs:restriction> </xs:simpleType> </xs:element> <xs:element name="TeacherAccounts" minOccurs="1" maxOccurs="1"> <xs:complexType> <xs:sequence> <xs:element name="Account" type="UserInfo" minOccurs="0" maxOccurs="unbounded" /> </xs:sequence> </xs:complexType> </xs:element> <xs:element name="FullTimeAccounts"> <xs:complexType> <xs:sequence> <xs:element name="Account" type="UserInfo" minOccurs="0" maxOccurs="unbounded"/> </xs:sequence> </xs:complexType> </xs:element> <xs:element name="PartTimeAccounts"> <xs:complexType> <xs:sequence> <xs:element name="Account" type="UserInfo" minOccurs="0" maxOccurs="unbounded" /> </xs:sequence> </xs:complexType> </xs:element> </xs:sequence> </xs:complexType> </xs:element> <xs:complexType name="UserInfo"> <xs:sequence> <xs:element name="StudentNumber"> <xs:simpleType> <xs:restriction base="xs:string"> <xs:minLength value="1"/> <xs:maxLength value="50"/> </xs:restriction> </xs:simpleType> </xs:element> <xs:element name="Password"> <xs:simpleType> <xs:restriction base="xs:string"> <xs:minLength value="6"/> <xs:maxLength value="50"/> </xs:restriction> </xs:simpleType> </xs:element> <xs:element name="Email"> <xs:simpleType> <xs:restriction base="xs:string"> <xs:pattern value="\w+([-+.']\w+)*@\w+([-.]\w+)*\.\w+([-.]\w+)*"/> </xs:restriction> </xs:simpleType> </xs:element> </xs:sequence> </xs:complexType> </xs:schema>

  Read the article

• Array help Index out of range exeption was unhandled

  - by Michael Quiles

  I am trying to populate combo boxes from a text file using comma as a delimiter everything was working fine, but now when I debug I get the "Index out of range exeption was unhandled" warning. I guess I need a fresh pair of eyes to see where I went wrong, I commented on the line that gets the error //Fname = fields[1]; using System; using System.Collections.Generic; using System.ComponentModel; using System.Data; using System.Drawing; using System.Drawing.Printing; using System.Linq; using System.Text; using System.Windows.Forms; using System.IO; namespace Sullivan_Payroll { public partial class xEmpForm : Form { bool complete = false; public xEmpForm() { InitializeComponent(); } private void xEmpForm_Resize(object sender, EventArgs e) { this.xCenterPanel.Left = Convert.ToInt16((this.Width - this.xCenterPanel.Width) / 2); this.xCenterPanel.Top = Convert.ToInt16((this.Height - this.xCenterPanel.Height) / 2); Refresh(); } private void exitToolStripMenuItem_Click(object sender, EventArgs e) { //Exits the application this.Close(); } private void xEmpForm_FormClosing(object sender, FormClosingEventArgs e) //use this on xtrip calculator { DialogResult Response; if (complete == true) { Application.Exit(); } else { Response = MessageBox.Show("Are you sure you want to Exit?", "Exit", MessageBoxButtons.YesNo, MessageBoxIcon.Question, MessageBoxDefaultButton.Button2); if (Response == DialogResult.No) { complete = false; e.Cancel = true; } else { complete = true; Application.Exit(); } } } private void xEmpForm_Load(object sender, EventArgs e) { //file sources string fileDept = "source\\Department.txt"; string fileSex = "source\\Sex.txt"; string fileStatus = "source\\Status.txt"; if (File.Exists(fileDept)) { using (System.IO.StreamReader sr = System.IO.File.OpenText(fileDept)) { string dept = ""; while ((dept = sr.ReadLine()) != null) { this.xDeptComboBox.Items.Add(dept); } } } else { MessageBox.Show("The Department file can not be found.", "Error", MessageBoxButtons.OK, MessageBoxIcon.Error); } if (File.Exists(fileSex)) { using (System.IO.StreamReader sr = System.IO.File.OpenText(fileSex)) { string sex = ""; while ((sex = sr.ReadLine()) != null) { this.xSexComboBox.Items.Add(sex); } } } else { MessageBox.Show("The Sex file can not be found.", "Error", MessageBoxButtons.OK, MessageBoxIcon.Error); } if (File.Exists(fileStatus)) { using (System.IO.StreamReader sr = System.IO.File.OpenText(fileStatus)) { string status = ""; while ((status = sr.ReadLine()) != null) { this.xStatusComboBox.Items.Add(status); } } } else { MessageBox.Show("The Status file can not be found.", "Error", MessageBoxButtons.OK, MessageBoxIcon.Error); } } private void xFileSaveMenuItem_Click(object sender, EventArgs e) { { const string fileNew = "source\\New Staff.txt"; string recordIn; FileStream outFile = new FileStream(fileNew, FileMode.Create, FileAccess.Write); StreamWriter writer = new StreamWriter(outFile); for (int count = 0; count <= this.xEmployeeListBox.Items.Count - 1; count++) { this.xEmployeeListBox.SelectedIndex = count; recordIn = this.xEmployeeListBox.SelectedItem.ToString(); writer.WriteLine(recordIn); } writer.Close(); outFile.Close(); this.xDeptComboBox.SelectedIndex = -1; this.xStatusComboBox.SelectedIndex = -1; this.xSexComboBox.SelectedIndex = -1; MessageBox.Show("your file is saved"); } } private void xViewFacultyMenuItem_Click(object sender, EventArgs e) { const string fileStaff = "source\\Staff.txt"; const char DELIM = ','; string Lname, Fname, Depart, Stat, Sex, Salary, cDept, cStat, cSex; double Gtotal; string recordIn; string[] fields; cDept = this.xDeptComboBox.SelectedItem.ToString(); cStat = this.xStatusComboBox.SelectedItem.ToString(); cSex = this.xSexComboBox.SelectedItem.ToString(); FileStream inFile = new FileStream(fileStaff, FileMode.Open, FileAccess.Read); StreamReader reader = new StreamReader(inFile); recordIn = reader.ReadLine(); while (recordIn != null) { fields = recordIn.Split(DELIM); Lname = fields[0]; Fname = fields[1]; // this is where the error appears Depart = fields[2]; Stat = fields[3]; Sex = fields[4]; Salary = fields[5]; Fname = fields[1].TrimStart(null); Depart = fields[2].TrimStart(null); Stat = fields[3].TrimStart(null); Sex = fields[4].TrimStart(null); Salary = fields[5].TrimStart(null); Gtotal = double.Parse(Salary); if (Depart == cDept && cStat == Stat && cSex == Sex) { this.xEmployeeListBox.Items.Add(recordIn); } recordIn = reader.ReadLine(); } reader.Close(); inFile.Close(); if (this.xEmployeeListBox.Items.Count >= 1) { this.xFileSaveMenuItem.Enabled = true; this.xFilePrintMenuItem.Enabled = true; this.xEditClearMenuItem.Enabled = true; } else { this.xFileSaveMenuItem.Enabled = false; this.xFilePrintMenuItem.Enabled = false; this.xEditClearMenuItem.Enabled = false; MessageBox.Show("Records not found"); } } private void xEditClearMenuItem_Click(object sender, EventArgs e) { this.xEmployeeListBox.Items.Clear(); this.xDeptComboBox.SelectedIndex = -1; this.xStatusComboBox.SelectedIndex = -1; this.xSexComboBox.SelectedIndex = -1; this.xFileSaveMenuItem.Enabled = false; this.xFilePrintMenuItem.Enabled = false; this.xEditClearMenuItem.Enabled = false; } } } Source file -- Anderson, Kristen, Accounting, Assistant, Female, 43155 Ball, Robin, Accounting, Instructor, Female, 42723 Chin, Roger, Accounting, Full, Male,59281 Coats, William, Accounting, Assistant, Male, 45371 Doepke, Cheryl, Accounting, Full, Female, 52105 Downs, Clifton, Accounting, Associate, Male, 46887 Garafano, Karen, Finance, Associate, Female, 49000 Hill, Trevor, Management, Instructor, Male, 38590 Jackson, Carole, Accounting, Instructor, Female, 38781 Jacobson, Andrew, Management, Full, Male, 56281 Lewis, Karl, Management, Associate, Male, 48387 Mack, Kevin, Management, Assistant, Male, 45000 McKaye, Susan, Management, Instructor, Female, 43979 Nelsen, Beth, Finance, Full, Female, 52339 Nelson, Dale, Accounting, Full, Male, 54578 Palermo, Sheryl, Accounting, Associate, Female, 45617 Rais, Mary, Finance, Instructor, Female, 27000 Scheib, Earl, Management, Instructor, Male, 37389 Smith, Tom, Finance, Full, Male, 57167 Smythe, Janice, Management, Associate, Female, 46887 True, David, Accounting, Full, Male, 53181 Young, Jeff, Management, Assistant, Male, 43513

  Read the article

• video and file caching with squid lusca?

  - by moon

  hello all i have configured squid lusca on ubuntu 11.04 version and also configured the video caching but the problem is the squid cannot configure the video more than 2 min long and the file of size upto 5.xx mbs only. here is my config please guide me how can i cache the long videos and files with squid: > # PORT and Transparent Option http_port 8080 transparent server_http11 on icp_port 0 > > # Cache Directory , modify it according to your system. > # but first create directory in root by mkdir /cache1 > # and then issue this command chown proxy:proxy /cache1 > # [for ubuntu user is proxy, in Fedora user is SQUID] > # I have set 500 MB for caching reserved just for caching , > # adjust it according to your need. > # My recommendation is to have one cache_dir per drive. zzz > > #store_dir_select_algorithm round-robin cache_dir aufs /cache1 500 16 256 cache_replacement_policy heap LFUDA memory_replacement_policy heap > LFUDA > > # If you want to enable DATE time n SQUID Logs,use following emulate_httpd_log on logformat squid %tl %6tr %>a %Ss/%03Hs %<st %rm > %ru %un %Sh/%<A %mt log_fqdn off > > # How much days to keep users access web logs > # You need to rotate your log files with a cron job. For example: > # 0 0 * * * /usr/local/squid/bin/squid -k rotate logfile_rotate 14 debug_options ALL,1 cache_access_log /var/log/squid/access.log > cache_log /var/log/squid/cache.log cache_store_log > /var/log/squid/store.log > > #I used DNSAMSQ service for fast dns resolving > #so install by using "apt-get install dnsmasq" first dns_nameservers 127.0.0.1 101.11.11.5 ftp_user anonymous@ ftp_list_width 32 ftp_passive on ftp_sanitycheck on > > #ACL Section acl all src 0.0.0.0/0.0.0.0 acl manager proto cache_object acl localhost src 127.0.0.1/255.255.255.255 acl > to_localhost dst 127.0.0.0/8 acl SSL_ports port 443 563 # https, snews > acl SSL_ports port 873 # rsync acl Safe_ports port 80 # http acl > Safe_ports port 21 # ftp acl Safe_ports port 443 563 # https, snews > acl Safe_ports port 70 # gopher acl Safe_ports port 210 # wais acl > Safe_ports port 1025-65535 # unregistered ports acl Safe_ports port > 280 # http-mgmt acl Safe_ports port 488 # gss-http acl Safe_ports port > 591 # filemaker acl Safe_ports port 777 # multiling http acl > Safe_ports port 631 # cups acl Safe_ports port 873 # rsync acl > Safe_ports port 901 # SWAT acl purge method PURGE acl CONNECT method > CONNECT http_access allow manager localhost http_access deny manager > http_access allow purge localhost http_access deny purge http_access > deny !Safe_ports http_access deny CONNECT !SSL_ports http_access allow > localhost http_access allow all http_reply_access allow all icp_access > allow all > > #========================== > # Administrative Parameters > #========================== > > # I used UBUNTU so user is proxy, in FEDORA you may use use squid cache_effective_user proxy cache_effective_group proxy cache_mgr > [email protected] visible_hostname proxy.aacable.net unique_hostname > [email protected] > > #============= > # ACCELERATOR > #============= half_closed_clients off quick_abort_min 0 KB quick_abort_max 0 KB vary_ignore_expire on reload_into_ims on log_fqdn > off memory_pools off > > # If you want to hide your proxy machine from being detected at various site use following via off > > #============================================ > # OPTIONS WHICH AFFECT THE CACHE SIZE / zaib > #============================================ > # If you have 4GB memory in Squid box, we will use formula of 1/3 > # You can adjust it according to your need. IF squid is taking too much of RAM > # Then decrease it to 128 MB or even less. > > cache_mem 256 MB minimum_object_size 512 bytes maximum_object_size 500 > MB maximum_object_size_in_memory 128 KB > > #============================================================$ > # SNMP , if you want to generate graphs for SQUID via MRTG > #============================================================$ > #acl snmppublic snmp_community gl > #snmp_port 3401 > #snmp_access allow snmppublic all > #snmp_access allow all > > #============================================================ > # ZPH , To enable cache content to be delivered at full lan speed, > # To bypass the queue at MT. > #============================================================ tcp_outgoing_tos 0x30 all zph_mode tos zph_local 0x30 zph_parent 0 > zph_option 136 > > # Caching Youtube acl videocache_allow_url url_regex -i \.youtube\.com\/get_video\? acl videocache_allow_url url_regex -i > \.youtube\.com\/videoplayback \.youtube\.com\/videoplay > \.youtube\.com\/get_video\? acl videocache_allow_url url_regex -i > \.youtube\.[a-z][a-z]\/videoplayback \.youtube\.[a-z][a-z]\/videoplay > \.youtube\.[a-z][a-z]\/get_video\? acl videocache_allow_url url_regex > -i \.googlevideo\.com\/videoplayback \.googlevideo\.com\/videoplay \.googlevideo\.com\/get_video\? acl videocache_allow_url url_regex -i > \.google\.com\/videoplayback \.google\.com\/videoplay > \.google\.com\/get_video\? acl videocache_allow_url url_regex -i > \.google\.[a-z][a-z]\/videoplayback \.google\.[a-z][a-z]\/videoplay > \.google\.[a-z][a-z]\/get_video\? acl videocache_allow_url url_regex > -i proxy[a-z0-9\-][a-z0-9][a-z0-9][a-z0-9]?\.dailymotion\.com\/ acl videocache_allow_url url_regex -i vid\.akm\.dailymotion\.com\/ acl > videocache_allow_url url_regex -i > [a-z0-9][0-9a-z][0-9a-z]?[0-9a-z]?[0-9a-z]?\.xtube\.com\/(.*)flv acl > videocache_allow_url url_regex -i \.vimeo\.com\/(.*)\.(flv|mp4) acl > videocache_allow_url url_regex -i > va\.wrzuta\.pl\/wa[0-9][0-9][0-9][0-9]? acl videocache_allow_url > url_regex -i \.youporn\.com\/(.*)\.flv acl videocache_allow_url > url_regex -i \.msn\.com\.edgesuite\.net\/(.*)\.flv acl > videocache_allow_url url_regex -i \.tube8\.com\/(.*)\.(flv|3gp) acl > videocache_allow_url url_regex -i \.mais\.uol\.com\.br\/(.*)\.flv acl > videocache_allow_url url_regex -i > \.blip\.tv\/(.*)\.(flv|avi|mov|mp3|m4v|mp4|wmv|rm|ram|m4v) acl > videocache_allow_url url_regex -i > \.apniisp\.com\/(.*)\.(flv|avi|mov|mp3|m4v|mp4|wmv|rm|ram|m4v) acl > videocache_allow_url url_regex -i \.break\.com\/(.*)\.(flv|mp4) acl > videocache_allow_url url_regex -i redtube\.com\/(.*)\.flv acl > videocache_allow_dom dstdomain .mccont.com .metacafe.com > .cdn.dailymotion.com acl videocache_deny_dom dstdomain > .download.youporn.com .static.blip.tv acl dontrewrite url_regex > redbot\.org \.php acl getmethod method GET > > storeurl_access deny dontrewrite storeurl_access deny !getmethod > storeurl_access deny videocache_deny_dom storeurl_access allow > videocache_allow_url storeurl_access allow videocache_allow_dom > storeurl_access deny all > > storeurl_rewrite_program /etc/squid/storeurl.pl > storeurl_rewrite_children 7 storeurl_rewrite_concurrency 10 > > acl store_rewrite_list urlpath_regex -i > \/(get_video\?|videodownload\?|videoplayback.*id) acl > store_rewrite_list urlpath_regex -i \.flv$ \.mp3$ \.mp4$ \.swf$ \ > storeurl_access allow store_rewrite_list storeurl_access deny all > > refresh_pattern -i \.flv$ 10080 80% 10080 override-expire > override-lastmod reload-into-ims ignore-reload ignore-no-cache > ignore-private ignore-auth refresh_pattern -i \.mp3$ 10080 80% 10080 > override-expire override-lastmod reload-into-ims ignore-reload > ignore-no-cache ignore-private ignore-auth refresh_pattern -i \.mp4$ > 10080 80% 10080 override-expire override-lastmod reload-into-ims > ignore-reload ignore-no-cache ignore-private ignore-auth > refresh_pattern -i \.swf$ 10080 80% 10080 override-expire > override-lastmod reload-into-ims ignore-reload ignore-no-cache > ignore-private ignore-auth refresh_pattern -i \.gif$ 10080 80% 10080 > override-expire override-lastmod reload-into-ims ignore-reload > ignore-no-cache ignore-private ignore-auth refresh_pattern -i \.jpg$ > 10080 80% 10080 override-expire override-lastmod reload-into-ims > ignore-reload ignore-no-cache ignore-private ignore-auth > refresh_pattern -i \.jpeg$ 10080 80% 10080 override-expire > override-lastmod reload-into-ims ignore-reload ignore-no-cache > ignore-private ignore-auth refresh_pattern -i \.exe$ 10080 80% 10080 > override-expire override-lastmod reload-into-ims ignore-reload > ignore-no-cache ignore-private ignore-auth > > # 1 year = 525600 mins, 1 month = 10080 mins, 1 day = 1440 refresh_pattern (get_video\?|videoplayback\?|videodownload\?|\.flv?) > 10080 80% 10080 ignore-no-cache ignore-private override-expire > override-lastmod reload-into-ims refresh_pattern > (get_video\?|videoplayback\?id|videoplayback.*id|videodownload\?|\.flv?) > 10080 80% 10080 ignore-no-cache ignore-private override-expire > override-lastmod reload-into-ims refresh_pattern \.(ico|video-stats) > 10080 80% 10080 override-expire ignore-reload ignore-no-cache > ignore-private ignore-auth override-lastmod negative-ttl=10080 > refresh_pattern \.etology\? 10080 > 80% 10080 override-expire ignore-reload ignore-no-cache > refresh_pattern galleries\.video(\?|sz) 10080 > 80% 10080 override-expire ignore-reload ignore-no-cache > refresh_pattern brazzers\? 10080 > 80% 10080 override-expire ignore-reload ignore-no-cache > refresh_pattern \.adtology\? 10080 > 80% 10080 override-expire ignore-reload ignore-no-cache > refresh_pattern > ^.*(utm\.gif|ads\?|rmxads\.com|ad\.z5x\.net|bh\.contextweb\.com|bstats\.adbrite\.com|a1\.interclick\.com|ad\.trafficmp\.com|ads\.cubics\.com|ad\.xtendmedia\.com|\.googlesyndication\.com|advertising\.com|yieldmanager|game-advertising\.com|pixel\.quantserve\.com|adperium\.com|doubleclick\.net|adserving\.cpxinteractive\.com|syndication\.com|media.fastclick.net).* > 10080 20% 10080 ignore-no-cache ignore-private override-expire > ignore-reload ignore-auth negative-ttl=40320 max-stale=10 > refresh_pattern ^.*safebrowsing.*google 10080 80% 10080 > override-expire ignore-reload ignore-no-cache ignore-private > ignore-auth negative-ttl=10080 refresh_pattern > ^http://((cbk|mt|khm|mlt)[0-9]?)\.google\.co(m|\.uk) 10080 80% > 10080 override-expire ignore-reload ignore-private negative-ttl=10080 > refresh_pattern ytimg\.com.*\.jpg > 10080 80% 10080 override-expire ignore-reload refresh_pattern > images\.friendster\.com.*\.(png|gif) 10080 80% > 10080 override-expire ignore-reload refresh_pattern garena\.com > 10080 80% 10080 override-expire reload-into-ims refresh_pattern > photobucket.*\.(jp(e?g|e|2)|tiff?|bmp|gif|png) 10080 80% > 10080 override-expire ignore-reload refresh_pattern > vid\.akm\.dailymotion\.com.*\.on2\? 10080 80% > 10080 ignore-no-cache override-expire override-lastmod refresh_pattern > mediafire.com\/images.*\.(jp(e?g|e|2)|tiff?|bmp|gif|png) 10080 80% > 10080 reload-into-ims override-expire ignore-private refresh_pattern > ^http:\/\/images|pics|thumbs[0-9]\. 10080 80% > 10080 reload-into-ims ignore-no-cache ignore-reload override-expire > refresh_pattern ^http:\/\/www.onemanga.com.*\/ > 10080 80% 10080 reload-into-ims ignore-no-cache ignore-reload > override-expire refresh_pattern > ^http://v\.okezone\.com/get_video\/([a-zA-Z0-9]) 10080 80% 10080 > override-expire ignore-reload ignore-no-cache ignore-private > ignore-auth override-lastmod negative-ttl=10080 > > #images facebook refresh_pattern -i \.facebook.com.*\.(jpg|png|gif) 10080 80% 10080 ignore-reload override-expire ignore-no-cache > refresh_pattern -i \.fbcdn.net.*\.(jpg|gif|png|swf|mp3) > 10080 80% 10080 ignore-reload override-expire ignore-no-cache > refresh_pattern static\.ak\.fbcdn\.net*\.(jpg|gif|png) > 10080 80% 10080 ignore-reload override-expire ignore-no-cache > refresh_pattern ^http:\/\/profile\.ak\.fbcdn.net*\.(jpg|gif|png) > 10080 80% 10080 ignore-reload override-expire ignore-no-cache > > #All File refresh_pattern -i \.(3gp|7z|ace|asx|bin|deb|divx|dvr-ms|ram|rpm|exe|inc|cab|qt) > 10080 80% 10080 ignore-no-cache override-expire override-lastmod > reload-into-ims refresh_pattern -i > \.(rar|jar|gz|tgz|bz2|iso|m1v|m2(v|p)|mo(d|v)|arj|lha|lzh|zip|tar) > 10080 80% 10080 ignore-no-cache override-expire override-lastmod > reload-into-ims refresh_pattern -i > \.(jp(e?g|e|2)|gif|pn[pg]|bm?|tiff?|ico|swf|dat|ad|txt|dll) > 10080 80% 10080 ignore-no-cache override-expire override-lastmod > reload-into-ims refresh_pattern -i > \.(avi|ac4|mp(e?g|a|e|1|2|3|4)|mk(a|v)|ms(i|u|p)|og(x|v|a|g)|rm|r(a|p)m|snd|vob) > 10080 80% 10080 ignore-no-cache override-expire override-lastmod > reload-into-ims refresh_pattern -i > \.(pp(t?x)|s|t)|pdf|rtf|wax|wm(a|v)|wmx|wpl|cb(r|z|t)|xl(s?x)|do(c?x)|flv|x-flv) > 10080 80% 10080 ignore-no-cache override-expire override-lastmod > reload-into-ims > > refresh_pattern -i (/cgi-bin/|\?) 0 0% 0 refresh_pattern ^gopher: > 1440 0% 1440 refresh_pattern ^ftp: 10080 95% 10080 > override-lastmod reload-into-ims refresh_pattern . 1440 > 95% 10080 override-lastmod reload-into-ims

  Read the article

• How to disable Mac OS X from using swap when there still is "Inactive" memory?

  - by Motin

  A common phenomena in my day to day usage (and several other's according to various posts throughout the internet) of OS X, the system seems to become slow whenever there is no more "Free" memory available. Supposedly, this is due to swapping, since heavy disk activity is apparent and that vm_stat reports many pageouts. (Correct me from wrong) However, the amount of "Inactive" ram is typically around 12.5%-25% of all available memory (^1.) when swapping starts/occurs/ends. According to http://support.apple.com/kb/ht1342 : Inactive memory This information in memory is not actively being used, but was recently used. For example, if you've been using Mail and then quit it, the RAM that Mail was using is marked as Inactive memory. This Inactive memory is available for use by another application, just like Free memory. However, if you open Mail before its Inactive memory is used by a different application, Mail will open quicker because its Inactive memory is converted to Active memory, instead of loading Mail from the slower hard disk. And according to http://developer.apple.com/library/mac/#documentation/Performance/Conceptual/ManagingMemory/Articles/AboutMemory.html : The inactive list contains pages that are currently resident in physical memory but have not been accessed recently. These pages contain valid data but may be released from memory at any time. So, basically: When a program has quit, it's memory becomes marked as Inactive and should be claimable at any time. Still, OS X will prefer to start swapping out memory to the Swap file instead of just claiming this memory, whenever the "Free" memory gets to low. Why? What is the advantage of this behavior over, say, instantly releasing Inactive memory and not even touch the swap file? Some sources (^2.) indicate that OS X would page out the "Inactive" memory to swap before releasing it, but that doesn't make sense now does it if the memory may be released from memory at any time? Swapping is expensive, releasing is cheap, right? Can this behavior be changed using some preference or known hack? (Preferably one that doesn't include disabling swap/dynamic_pager altogether and restarting...) I do appreciate the purge command, as well as the concept of Repairing disk permissions to force some Free memory, but those are ways to painfully force more Free memory than to actually fixing the swap/release decision logic... Btw a similar question was asked here: http://forums.macnn.com/90/mac-os-x/434650/why-does-os-x-swap-when/ and here: http://hintsforums.macworld.com/showthread.php?t=87688 but even though the OPs re-asked the core question, none of the replies addresses an answer to it... ^1. UPDATE 17-mar-2012 Since I first posted this question, I have gone from 4gb to 8gb of installed ram, and the problem remains. The amount of "Inactive" ram was 0.5gb-1.0gb before and is now typically around 1.0-2.0GB when swapping starts/occurs/ends, ie it seems that around 12.5%-25% of the ram is preserved as Inactive by osx kernel logic. ^2. For instance http://apple.stackexchange.com/questions/4288/what-does-it-mean-if-i-have-lots-of-inactive-memory-at-the-end-of-a-work-day : Once all your memory is used (free memory is 0), the OS will write out inactive memory to the swapfile to make more room in active memory. UPDATE 17-mar-2012 Here is a round-up of the methods that have been suggested to help so far: The purge command "Used to approximate initial boot conditions with a cold disk buffer cache for performance analysis. It does not affect anonymous memory that has been allocated through malloc, vm_allocate, etc". This is useful to prevent osx to swap-out the disk cache (which is ridiculous that osx actually does so in the first place), but with the downside that the disk cache is released, meaning that if the disk cache was not about to be swapped out, one would simply end up with a cold disk buffer cache, probably affecting performance negatively. The FreeMemory app and/or Repairing disk permissions to force some Free memory Doesn't help releasing any memory, only moving some gigabytes of memory contents from ram to the hd. In the end, this causes lots of swap-ins when I attempt to use the applications that were open while freeing memory, as a lot of its vm is now on swap. Speeding up swap-allocation using dynamicpagerwrapper Seems a good thing to do in order to speed up swap-usage, but does not address the problem of osx swapping in the first place while there is still inactive memory. Disabling swap by disabling dynamicpager and restarting This will force osx not to use swap to the price of the system hanging when all memory is used. Not a viable alternative... Disabling swap using a hacked dynamicpager Similar to disabling dynamicpager above, some excerpts from the comments to the blog post indicate that this is not a viable solution: "The Inactive Memory is high as usual". "when your system is running out of memory, the whole os hangs...", "if you consume the whole amount of memory of the mac, the machine will likely hang" To sum up, I am still unaware of a way of disabling Mac OS X from using swap when there still is "Inactive" memory. If it isn't possible, maybe at least there is an explanation somewhere of why osx prefers to swap out memory that may be released from memory at any time?

  Read the article

• Deployment Workbench no longer available after PXE boot

  - by Patrick

  Our build process revolves around windows Deployment Workbench. Unfortunately this was setup by someone who is no longer with the company, and no-one has ever dared/needed to make any changes. The other day it stopped working. It turns out that one of our build guys started thinking about changing some stuff in it, clicked something and now it no longer works (He is saying now that he right clicked on the 'LAB' entry in 'Deployment points' and hit 'Update', which took some time to run through apparently). The job has fallen on me to resolve and frankly I'm not sure what I'm doing. I was wondering if someone with more experience than me can provide some pointers as to troubleshooting cos I'm feeling quite a lot in the dark here. On the server I have Deployment Workbench up and running (MMC snapin) version 3.0. There is a WDS service that appears to be running ok, as does the tFTPd service. Nothing specific to this in event logs. From the client side; PXE boot works and gets you to the Win PE launch, and it has the correct company logo as the background (proving to me that its loading win PE from the network). WPEINIT runs, and asks for domain credentials, here the team simply put User/Pass/Domain in the boxes and click ok. Normally the build would kick off. Instead they get an error message saying that the \NATBLU01\Distribution$ share isn't available. Checking \NATBLU01\Distribution$ shows that its there and accessible over the network. Security/permissions seem ok, even 'ANONYMOUS LOGON' has read access to that share so I don't see that being a problem. Digging the trace files from C:\MININT\SMSOSD\OSDLOGS\ after an attempt to run the build I can see an error saying much the same - <![LOG[Validating connection to \\NATBLU01\Distribution$]LOG]!><time="16:42:14.000+000" date="03-15-2012" component="LiteTouch" context="" type="1" thread="" file="LiteTouch"> <![LOG[FindFile: The file OSDConnectToUNC.exe could not be found in any standard locations.]LOG]!><time="16:42:14.000+000" date="03-15-2012" component="LiteTouch" context="" type="1" thread="" file="LiteTouch"> <![LOG[The network location cannot be reached. For information about network troubleshooting, see Windows Help.]LOG]!><time="16:42:24.000+000" date="03-15-2012" component="LiteTouch" context="" type="3" thread="" file="LiteTouch"> <![LOG[ERROR - Unable to map a network drive to \\NATBLU01\Distribution$.]LOG]!><time="16:42:24.000+000" date="03-15-2012" component="LiteTouch" context="" type="3" thread="" file="LiteTouch"> BDD.LOG shows much the same. Full copies of the .LOG files can both files be found here : BDD.LOG LITETOUCH.LOG I can get to a command prompt from the Win PE that boots from PXE, however there isn't any network stuff there. IPCONFIG returns nothing so none of the tests I would usually run resolve anything. I'm at a loss frankly. I did wonder if I could perhaps start a new build process but if the change to the DeploymentWorkbench has knocked it offline I don't think I'm going to be able to create a new deployment. Failing that; we do have a deployment point labeled type 'Media' which appears to be a DVD ISO image of one of the builds, but its dated 2008, is it possible to export the network build to .ISO and build from DVD? We are looking at new hardware to run this from anyway (for the impending Windows 7 roll out) so a temporary work round isn't going to be too much of a problem. All assistance is appreciated! EDIT : OK. Got it working again. Solution was close to Newmanth's idea. The problem was that our PE image didn't appear to be connecting the network. I had an older copy of the PE boot.WIM on a stick that I had been using for other purposes. I booted that and correctly got a network connection. Showed a correct internal IP and could ping out etc etc. However I was still getting the same errors in all the logs and in when wpeinit was running. What I did seperately was to update the PE image that DeploymentWorkbench was pushing out to display a different back ground. I wanted to prove that I was working in the correct place. Turns out that I wasn't. I went and looked at the other deployment stuff we had on this machine, Windows Deployment Services was installed and although all the install images are off line the boot image was online, so I uploaded the copy from my stick to that. Booted straight off. And fixed. Working. Yay! For anyone stumbling across this in the future you may find that although your deployment images are located in the DeploymentWorkbench, the Win PE boot image you are launching from is located in the associated Windows Deployment Services images.

  Read the article

• Grails - Simple hasMany Problem - Using CheckBoxes rather than HTML Select in create.gsp

  - by gav

  My problem is this: I want to create a grails domain instance, defining the 'Many' instances of another domain that it has. I have the actual source in a Google Code Project but the following should illustrate the problem. class Person { String name static hasMany[skills:Skill] static constraints = { id (visible:false) skills (nullable:false, blank:false) } } class Skill { String name String description static constraints = { id (visible:false) name (nullable:false, blank:false) description (nullable:false, blank:false) } } If you use this model and def scaffold for the two Controllers then you end up with a form like this that doesn't work; My own attempt to get this to work enumerates the Skills as checkboxes and looks like this; But when I save the Volunteer the skills are null! This is the code for my save method; def save = { log.info "Saving: " + params.toString() def skills = params.skills log.info "Skills: " + skills def volunteerInstance = new Volunteer(params) log.info volunteerInstance if (volunteerInstance.save(flush: true)) { flash.message = "${message(code: 'default.created.message', args: [message(code: 'volunteer.label', default: 'Volunteer'), volunteerInstance.id])}" redirect(action: "show", id: volunteerInstance.id) log.info volunteerInstance } else { render(view: "create", model: [volunteerInstance: volunteerInstance]) } } This is my log output (I have custom toString() methods); 2010-05-10 21:06:41,494 [http-8080-3] INFO bumbumtrain.VolunteerController - Saving: ["skills":["1", "2"], "name":"Ian", "_skills":["", ""], "create":"Create", "action":"save", "controller":"volunteer"] 2010-05-10 21:06:41,495 [http-8080-3] INFO bumbumtrain.VolunteerController - Skills: [1, 2] 2010-05-10 21:06:41,508 [http-8080-3] INFO bumbumtrain.VolunteerController - Volunteer[ id: null | Name: Ian | Skills [Skill[ id: 1 | Name: Carpenter ] , Skill[ id: 2 | Name: Sound Engineer ] ]] Note that in the final log line the right Skills have been picked up and are part of the object instance. When the volunteer is saved the 'Skills' are ignored and not commited to the database despite the in memory version created clearly does have the items. Is it not possible to pass the Skills at construction time? There must be a way round this? I need a single form to allow a person to register but I want to normalise the data so that I can add more skills at a later time. If you think this should 'just work' then a link to a working example would be great. If I use the HTML Select then it works fine! Such as the following to make the Create page; <tr class="prop"> <td valign="top" class="name"> <label for="skills"><g:message code="volunteer.skills.label" default="Skills" /></label> </td> <td valign="top" class="value ${hasErrors(bean: volunteerInstance, field: 'skills', 'errors')}"> <g:select name="skills" from="${uk.co.bumbumtrain.Skill.list()}" multiple="yes" optionKey="id" size="5" value="${volunteerInstance?.skills}" /> </td> </tr> But I need it to work with checkboxes like this; <tr class="prop"> <td valign="top" class="name"> <label for="skills"><g:message code="volunteer.skills.label" default="Skills" /></label> </td> <td valign="top" class="value ${hasErrors(bean: volunteerInstance, field: 'skills', 'errors')}"> <g:each in="${skillInstanceList}" status="i" var="skillInstance"> <label for="${skillInstance?.name}"><g:message code="${skillInstance?.name}.label" default="${skillInstance?.name}" /></label> <g:checkBox name="skills" value="${skillInstance?.id.toString()}"/> </g:each> </td> </tr> The log output is exactly the same! With both style of form the Volunteer instance is created with the Skills correctly referenced in the 'Skills' variable. When saving, the latter fails with a null reference exception as shown at the top of this question. Hope this makes sense, thanks in advance! Gav

  Read the article

• Java: micro-optimizing array manipulation

  - by Martin Wiboe

  Hello all, I am trying to make a Java port of a simple feed-forward neural network. This obviously involves lots of numeric calculations, so I am trying to optimize my central loop as much as possible. The results should be correct within the limits of the float data type. My current code looks as follows (error handling & initialization removed): /** * Simple implementation of a feedforward neural network. The network supports * including a bias neuron with a constant output of 1.0 and weighted synapses * to hidden and output layers. * * @author Martin Wiboe */ public class FeedForwardNetwork { private final int outputNeurons; // No of neurons in output layer private final int inputNeurons; // No of neurons in input layer private int largestLayerNeurons; // No of neurons in largest layer private final int numberLayers; // No of layers private final int[] neuronCounts; // Neuron count in each layer, 0 is input // layer. private final float[][][] fWeights; // Weights between neurons. // fWeight[fromLayer][fromNeuron][toNeuron] // is the weight from fromNeuron in // fromLayer to toNeuron in layer // fromLayer+1. private float[][] neuronOutput; // Temporary storage of output from previous layer public float[] compute(float[] input) { // Copy input values to input layer output for (int i = 0; i < inputNeurons; i++) { neuronOutput[0][i] = input[i]; } // Loop through layers for (int layer = 1; layer < numberLayers; layer++) { // Loop over neurons in the layer and determine weighted input sum for (int neuron = 0; neuron < neuronCounts[layer]; neuron++) { // Bias neuron is the last neuron in the previous layer int biasNeuron = neuronCounts[layer - 1]; // Get weighted input from bias neuron - output is always 1.0 float activation = 1.0F * fWeights[layer - 1][biasNeuron][neuron]; // Get weighted inputs from rest of neurons in previous layer for (int inputNeuron = 0; inputNeuron < biasNeuron; inputNeuron++) { activation += neuronOutput[layer-1][inputNeuron] * fWeights[layer - 1][inputNeuron][neuron]; } // Store neuron output for next round of computation neuronOutput[layer][neuron] = sigmoid(activation); } } // Return output from network = output from last layer float[] result = new float[outputNeurons]; for (int i = 0; i < outputNeurons; i++) result[i] = neuronOutput[numberLayers - 1][i]; return result; } private final static float sigmoid(final float input) { return (float) (1.0F / (1.0F + Math.exp(-1.0F * input))); } } I am running the JVM with the -server option, and as of now my code is between 25% and 50% slower than similar C code. What can I do to improve this situation? Thank you, Martin Wiboe

  Read the article

• Programmatically swap colors from a loaded bitmap to Red, Green, Blue or Gray, pixel by pixel.

  - by eyeClaxton

  Download source code here: http://www.eyeClaxton.com/download/delphi/ColorSwap.zip I would like to take a original bitmap (light blue) and change the colors (Pixel by Pixel) to the red, green, blue and gray equivalence relation. To get an idea of what I mean, I have include the source code and a screen shot. Any help would be greatly appreciated. If more information is needed, please feel free to ask. If you could take a look at the code below, I have three functions that I'm looking for help on. The functions "RGBToRed, RGBToGreen and RGBToRed" I can't seem to come up with the right formulas. unit MainUnit; interface uses Windows, Messages, SysUtils, Variants, Classes, Graphics, Controls, Forms, Dialogs, ExtCtrls, StdCtrls; type TMainFrm = class(TForm) Panel1: TPanel; Label1: TLabel; Panel2: TPanel; Label2: TLabel; Button1: TButton; BeforeImage1: TImage; AfterImage1: TImage; RadioGroup1: TRadioGroup; procedure FormCreate(Sender: TObject); procedure Button1Click(Sender: TObject); private { Private declarations } public { Public declarations } end; var MainFrm: TMainFrm; implementation {$R *.DFM} function RGBToGray(RGBColor: TColor): TColor; var Gray: Byte; begin Gray := Round( (0.90 * GetRValue(RGBColor)) + (0.88 * GetGValue(RGBColor)) + (0.33 * GetBValue(RGBColor))); Result := RGB(Gray, Gray, Gray); end; function RGBToRed(RGBColor: TColor): TColor; var Red: Byte; begin // Not sure of the algorithm for this color Result := RGB(Red, Red, Red); end; function RGBToGreen(RGBColor: TColor): TColor; var Green: Byte; begin // Not sure of the algorithm for this color Result := RGB(Green, Green, Green); end; function RGBToBlue(RGBColor: TColor): TColor; var Blue: Byte; begin // Not sure of the algorithm for this color Result := RGB(Blue, Blue, Blue); end; procedure TMainFrm.FormCreate(Sender: TObject); begin BeforeImage1.Picture.LoadFromFile('Images\RightCenter.bmp'); end; procedure TMainFrm.Button1Click(Sender: TObject); var Bitmap: TBitmap; I, X: Integer; Color: Integer; begin Bitmap := TBitmap.Create; try Bitmap.LoadFromFile('Images\RightCenter.bmp'); for X := 0 to Bitmap.Height do begin for I := 0 to Bitmap.Width do begin Color := ColorToRGB(Bitmap.Canvas.Pixels[I, X]); case Color of $00000000: ; // Skip any Color Here! else case RadioGroup1.ItemIndex of 0: Bitmap.Canvas.Pixels[I, X] := RGBToBlue(Color); 1: Bitmap.Canvas.Pixels[I, X] := RGBToRed(Color); 2: Bitmap.Canvas.Pixels[I, X] := RGBToGreen(Color); 3: Bitmap.Canvas.Pixels[I, X] := RGBToGray(Color); end; end; end; end; AfterImage1.Picture.Graphic := Bitmap; finally Bitmap.Free; end; end; end. Okay, I apologize for not making it clearer. I'm trying to take a bitmap (blue in color) and swap the blue pixels with another color. Like the shots below.

  Read the article

• Custom ProgressBarBrushConverter Not Filling In ProgressBar

  - by Wonko the Sane

  Hello All, I am attempting to create a custom ProgressBarBrushConverter, based on information from here and here. However, when it runs, the progress is not being shown. If I use the code found in the links, it appears to work correctly. Here is the converter in question: public object Convert(object[] values, Type targetType, object parameter, CultureInfo culture) { ProgressBar progressBar = null; foreach (object value in values) { if (value is ProgressBar) { progressBar = value as ProgressBar; break; } } if (progressBar == null) return DependencyProperty.UnsetValue; FrameworkElement indicator = progressBar.Template.FindName("PART_Indicator", progressBar) as FrameworkElement; DrawingBrush drawingBrush = new DrawingBrush(); drawingBrush.Viewport = drawingBrush.Viewbox = new Rect(0.0, 0.0, indicator.ActualWidth, indicator.ActualHeight); drawingBrush.ViewportUnits = BrushMappingMode.Absolute; drawingBrush.TileMode = TileMode.None; drawingBrush.Stretch = Stretch.None; DrawingGroup group = new DrawingGroup(); DrawingContext context = group.Open(); context.DrawRectangle(progressBar.Foreground, null, new Rect(0.0, 0.0, indicator.ActualWidth, indicator.ActualHeight)); context.Close(); drawingBrush.Drawing = group; return drawingBrush; } Here is the ControlTemplate (the MultiBinding is to make sure that the converter is called whenever the Value or IsIndeterminate properties are changed): <ControlTemplate x:Key="customProgressBarTemplate" TargetType="{x:Type ProgressBar}"> <Grid> <Path x:Name="PART_Track" HorizontalAlignment="Left" VerticalAlignment="Top" Stretch="Fill" StrokeLineJoin="Round" Stroke="#DDCBCBCB" StrokeThickness="4" Data="M 20,100 L 80,10 C 100,120 160,140 190,180 S 160,220 130,180 T 120,150 20,100 Z "> <Path.Fill> <MultiBinding> <MultiBinding.Converter> <local:ProgressBarBrushConverter /> </MultiBinding.Converter> <Binding RelativeSource="{RelativeSource FindAncestor, AncestorType={x:Type ProgressBar}}" /> <Binding Path="IsIndeterminate" RelativeSource="{RelativeSource TemplatedParent}"/> <Binding Path="Value" RelativeSource="{RelativeSource TemplatedParent}"/> </MultiBinding> </Path.Fill> <!--<Path.LayoutTransform> <RotateTransform Angle="180" CenterX="190" CenterY="110" /> </Path.LayoutTransform>--> </Path> <Rectangle x:Name="PART_Indicator" HorizontalAlignment="Stretch" VerticalAlignment="Stretch" Margin="1" /> </Grid> </ControlTemplate> Finally, the Window code (fairly straightforward - it just animates progress from 0 to 100 and back again): <ProgressBar x:Name="progress" Template="{StaticResource customProgressBarTemplate}" Foreground="Red"> <ProgressBar.Triggers> <EventTrigger RoutedEvent="ProgressBar.Loaded"> <BeginStoryboard x:Name="storyAnimate"> <Storyboard> <DoubleAnimationUsingKeyFrames Duration="0:0:12" AutoReverse="True" FillBehavior="Stop" RepeatBehavior="Forever" Storyboard.TargetName="progress" Storyboard.TargetProperty="(ProgressBar.Value)"> <LinearDoubleKeyFrame Value="0" KeyTime="0:0:0" /> <LinearDoubleKeyFrame Value="100" KeyTime="0:0:5" /> <LinearDoubleKeyFrame Value="100" KeyTime="0:0:6" /> <LinearDoubleKeyFrame Value="0" KeyTime="0:0:11" /> <LinearDoubleKeyFrame Value="0" KeyTime="0:0:12" /> </DoubleAnimationUsingKeyFrames> </Storyboard> </BeginStoryboard> </EventTrigger> </ProgressBar.Triggers> </ProgressBar> I am thinking that the problem is in the DrawRectangle call in the Convert method, but setting a TracePoint on it shows what appear to be valid values for the Rect. What am I missing here? Thanks, wTs

  Read the article

• Need help to debug application using .Net and MySQL

  - by Tim Murphy

  What advice can you give me on how to track down a bug I have while inserting data into MySQL database with .Net? The error message is: MySql.Data.MySqlClient.MySqlException: Duplicate entry '26012' for key 'StockNumber_Number_UNIQUE' Reviewing of the log proves that StockNumber_Number of 26012 has not been inserted yet. Products in use. Visual Studio 2008. mysql.data.dll 6.0.4.0. Windows 7 Ultimate 64 bit and Windows 2003 32 bit. Custom built ORM framework (have source code). Importing data from Access 2003 database. The code works fine for 3000 - 5000 imports. The record being imported that causes the problem in a full run works fine if just importing by itself. I've also seen the error on other records if I sort the data to be imported a different way. Have tried import with and without transactions. Have logged the hell out of the system. The SQL command to create the table: CREATE TABLE `RareItems_RareItems` ( `RareItemKey` CHAR(36) NOT NULL PRIMARY KEY, `StockNumber_Text` VARCHAR(7) NOT NULL, `StockNumber_Number` INT NOT NULL AUTO_INCREMENT, UNIQUE INDEX `StockNumber_Number_UNIQUE` (`StockNumber_Number` ASC), `OurPercentage` NUMERIC , `SellPrice` NUMERIC(19, 2) , `Author` VARCHAR(250) , `CatchWord` VARCHAR(250) , `Title` TEXT , `Publisher` VARCHAR(250) , `InternalNote` VARCHAR(250) , `DateOfPublishing` VARCHAR(250) , `ExternalNote` LONGTEXT , `Description` LONGTEXT , `Scrap` LONGTEXT , `SuppressionKey` CHAR(36) NOT NULL, `TypeKey` CHAR(36) NOT NULL, `CatalogueStatusKey` CHAR(36) NOT NULL, `CatalogueRevisedDate` DATETIME , `CatalogueRevisedByKey` CHAR(36) NOT NULL, `CatalogueToBeRevisedByKey` CHAR(36) NOT NULL, `DontInsure` BIT NOT NULL, `ExtraCosts` NUMERIC(19, 2) , `IsWebReady` BIT NOT NULL, `LocationKey` CHAR(36) NOT NULL, `LanguageKey` CHAR(36) NOT NULL, `CatalogueDescription` VARCHAR(250) , `PlacePublished` VARCHAR(250) , `ToDo` LONGTEXT , `Headline` VARCHAR(250) , `DepartmentKey` CHAR(36) NOT NULL, `Temp1` INT , `Temp2` INT , `Temp3` VARCHAR(250) , `Temp4` VARCHAR(250) , `InternetStatusKey` CHAR(36) NOT NULL, `InternetStatusInfo` LONGTEXT , `PurchaseKey` CHAR(36) NOT NULL, `ConsignmentKey` CHAR(36) , `IsSold` BIT NOT NULL, `RowCreated` DATETIME NOT NULL, `RowModified` DATETIME NOT NULL ); The SQL command and parameters to insert the record: INSERT INTO `RareItems_RareItems` (`RareItemKey`, `StockNumber_Text`, `StockNumber_Number`, `OurPercentage`, `SellPrice`, `Author`, `CatchWord`, `Title`, `Publisher`, `InternalNote`, `DateOfPublishing`, `ExternalNote`, `Description`, `Scrap`, `SuppressionKey`, `TypeKey`, `CatalogueStatusKey`, `CatalogueRevisedDate`, `CatalogueRevisedByKey`, `CatalogueToBeRevisedByKey`, `DontInsure`, `ExtraCosts`, `IsWebReady`, `LocationKey`, `LanguageKey`, `CatalogueDescription`, `PlacePublished`, `ToDo`, `Headline`, `DepartmentKey`, `Temp1`, `Temp2`, `Temp3`, `Temp4`, `InternetStatusKey`, `InternetStatusInfo`, `PurchaseKey`, `ConsignmentKey`, `IsSold`, `RowCreated`, `RowModified`) VALUES (@RareItemKey, @StockNumber_Text, @StockNumber_Number, @OurPercentage, @SellPrice, @Author, @CatchWord, @Title, @Publisher, @InternalNote, @DateOfPublishing, @ExternalNote, @Description, @Scrap, @SuppressionKey, @TypeKey, @CatalogueStatusKey, @CatalogueRevisedDate, @CatalogueRevisedByKey, @CatalogueToBeRevisedByKey, @DontInsure, @ExtraCosts, @IsWebReady, @LocationKey, @LanguageKey, @CatalogueDescription, @PlacePublished, @ToDo, @Headline, @DepartmentKey, @Temp1, @Temp2, @Temp3, @Temp4, @InternetStatusKey, @InternetStatusInfo, @PurchaseKey, @ConsignmentKey, @IsSold, @RowCreated, @RowModified) @RareItemKey = 0b625bd6-776d-43d6-9405-e97159d172a6 @StockNumber_Text = 199305 @StockNumber_Number = 26012 @OurPercentage = 22.5 @SellPrice = 1250 @Author = SPARRMAN, Anders. @CatchWord = COOK: SECOND VOYAGE @Title = A Voyage Round the World with Captain James Cook in H.M.S. Resolution… Introduction and notes by Owen Rutter, wood engravings by Peter Barker-Mill. @Publisher = @InternalNote = @DateOfPublishing = 1944 @ExternalNote = The first English translation of Sparrman’s narrative, which had originally been published in Sweden in 1802-1818, and the only complete version of his account to appear in English. The eighteenth-century translation had appeared some time before the Swedish publication of the final sections of his account. Sparrman’s observant and well-written narrative of the second voyage contains much that appears nowhere else, emphasising naturally his interests in medicine, health, and natural history.&lt;br&gt;&lt;br&gt;One of 350 numbered copies: a handsomely produced and beautifully illustrated work. @Description = Small folio, wood-engravings in the text; original olive glazed cloth, top edges gilt, a very good copy. London, Golden Cockerel Press, 1944. @Scrap = @SuppressionKey = 00000000-0000-0000-0000-000000000000 @TypeKey = 93f58155-7471-46ad-84c5-262ab9dd37e8 @CatalogueStatusKey = 00000000-0000-0000-0000-000000000003 @CatalogueRevisedDate = @CatalogueRevisedByKey = c4f6fc06-956d-44c4-b393-0d5462cbffec @CatalogueToBeRevisedByKey = 00000000-0000-0000-0000-000000000000 @DontInsure = False @ExtraCosts = @IsWebReady = False @LocationKey = 00000000-0000-0000-0000-000000000000 @LanguageKey = 00000000-0000-0000-0000-000000000000 @CatalogueDescription = @PlacePublished = Golden Cockerel Press @ToDo = @Headline = @DepartmentKey = 529578a3-9189-40de-b656-eef9039d00b8 @Temp1 = @Temp2 = @Temp3 = @Temp4 = v @InternetStatusKey = 00000000-0000-0000-0000-000000000000 @InternetStatusInfo = @PurchaseKey = 00000000-0000-0000-0000-000000000000 @ConsignmentKey = @IsSold = True @RowCreated = 8/04/2010 8:49:16 PM @RowModified = 8/04/2010 8:49:16 PM Suggestions on what is causing the error and/or how to track down what is causing the problem?

  Read the article

• OpenID and Iframes

  - by Phood

  hey guys, I'm having a little bit of trouble making OpenID work from within an iframe. basically I have some heavy handed content loaded on the main page and I want to build a log in system where the page doesn't need to be reloaded (and thus reload all of that content again). I fell in love with OpenID from using stack exchange websites, and have intergrated it relatively well into other projects. I feel to do what I want to do I would like to try and use an iframe (because new windows make me cry), however I have stumbled at some form of hurdle somewhere near the middle and for the life of me can't work out whats going on... basically I have a form in a jQuery generated DIV and openID form that seems to work to dynamically load an iframe. something along these lines: <script type="text/javascript"> contentboxs = 0; function contentbox() { if (contentboxs == 0){ $('#mainpage').append("<div id='contentbox'><div style='clear:both;' id='oritext'></div><div id='f_content'><iframe src ='' name='framedcontent' width='580' height='600' scrolling='false'></iframe></div></div>"); $('#f_content').hide(); contentboxs++; } else { $('#contentbox-wipe').remove(); $('#contentbox').remove(); contentboxs--; } } function loginpanel(){ contentbox(); if (contentboxs == 1){ $('#oritext').append("<form method='post' action='login.php' name='oidform' target='framedcontent'>Please Select your OpenID Provider: <br/><input type='text' name=\"id\" id='openidbox' /><br /><input type='submit' name='submit' value='Log In' onclick='loginsubmit();' ></form>"); } } function loginsubmit() { $('#oritext').html(''); $('#contentbox').animate({'height':'600px', 'width':'700px', 'margin-top' : '-300px', 'margin-left' : '-350px'},500, 'linear', function() { $('#f_content').show(); }); } </script> <a href='javascript:loginpanel();'>login</a> and as far as I can tell this all works fine. my problem comes in my re-direction to the openID remote sites (again doing it with JS along these lines:) echo("<div><p><center>Redirecting...</center></div>"); echo "<script type='text/javascript'> function delayer() { this.location = '".$url."' } setTimeout('delayer()', 3000) </script>"; sorry this is a bit long winded, but here is my problem (finally): this works fine for some of the OID sites that I have tried, but some are giving me problems: Google won't load at all, Yahoo and mySpace open fine in the iframe then instantly redirect the full window to the home page and the OID page respectively, and wordpress returns an error. I'm assuming that this is a counter measure put in place to stop me stealing login details (thats not what i'm trying to achieve btw, hence the preamble), and thats fair enough, but still bloody aggravating. is there any thing here that i'm doing retardedly, is there some way round this, and if neither of the above, is my only other options to create new windows or build my own login/registration. If you have got this far thank you very much for your time, and I hope you didn't mind too much the spelling mistakes.

  Read the article

• creating a tooltip for a line drawn on cartesiandatacanvas in flex

  - by Guru

  I am trying to draw a line on cartesiandatacanvas. While I am able to draw lines easily using the canvas.moveTo and canvas.lineTo methods, I cannot provide a tooltip to the line if I use that functionality. I have tried creating a label(when ever I draw a line) and adding a tooltip to it but since I show the lines in a 10*10 grid both vertical and horizontal there is a overlap and it is confusing. So now I am trying to create a line object that extends shape or UIComponent. I cannot add this object to canvas using the addChild method it does not work. The addDataChild method works but it messes with the positioning of the line. Can someone help with a solution to this. Simply put I want to draw lines on a datacanvas and add tooltips to them. Here is my code for the line object: package model { import flash.display.CapsStyle; import flash.display.JointStyle; import flash.display.LineScaleMode; import mx.core.UIComponent; public class Line extends UIComponent { public var x1:Number; public var x2:Number; public var y1:Number; public var y2:Number; public var color:Number; public function Line(x1:Number, y1:Number, x2:Number, y2:Number,color:Number) { super(); this.graphics.lineStyle(4, color, 1, true, LineScaleMode.NORMAL, CapsStyle.ROUND, JointStyle.MITER, 1 ); this.graphics.moveTo(x1,y1); this.graphics.lineTo(x2,y2); } } } Here is a sample MXML that has a canvas and tries to use the line object above: <?xml version="1.0" encoding="utf-8"?> <mx:WindowedApplication xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" initialize="init()"> <mx:Script> <![CDATA[ import model.Line; import mx.charts.chartClasses.CartesianCanvasValue; private var accidImage:Image = new Image(); public function init():void { var line:Line = new Line(10,10,40,40,0XFF0000); // canvas.addChild(line); *Does not Work* canvas.addDataChild(line,10,10,null,null,null,null); } ]]> </mx:Script> <mx:Panel x="60" y="53" width="517" height="472" layout="absolute"> <mx:PlotChart x="48" y="10" id="plotchart1"> <mx:series> <mx:PlotSeries displayName="Series 1" yField=""/> </mx:series> <mx:annotationElements> <mx:CartesianDataCanvas id="canvas" includeInRanges="true"/> </mx:annotationElements> <mx:verticalAxis> <mx:LinearAxis id="axis11" minimum="0" maximum="100" interval="10" padding="10"/> </mx:verticalAxis> <mx:horizontalAxis> <mx:LinearAxis id="axis21" minimum="0" maximum="100" interval="10" padding="10"/> </mx:horizontalAxis> </mx:PlotChart> <mx:Legend dataProvider="{plotchart1}"/> </mx:Panel> </mx:WindowedApplication>

  Read the article

• Overriding Object.Equals() instance method in C#; now Code Analysis / FxCop warning CA2218: "should

  - by Chris W. Rea

  I've got a complex class in my C# project on which I want to be able to do equality tests. It is not a trivial class; it contains a variety of scalar properties as well as references to other objects and collections (e.g. IDictionary). For what it's worth, my class is sealed. To enable a performance optimization elsewhere in my system (an optimization that avoids a costly network round-trip), I need to be able to compare instances of these objects to each other for equality – other than the built-in reference equality – and so I'm overriding the Object.Equals() instance method. However, now that I've done that, Visual Studio 2008's Code Analysis a.k.a. FxCop, which I keep enabled by default, is raising the following warning: warning : CA2218 : Microsoft.Usage : Since 'MySuperDuperClass' redefines Equals, it should also redefine GetHashCode. I think I understand the rationale for this warning: If I am going to be using such objects as the key in a collection, the hash code is important. i.e. see this question. However, I am not going to be using these objects as the key in a collection. Ever. Feeling justified to suppress the warning, I looked up code CA2218 in the MSDN documentation to get the full name of the warning so I could apply a SuppressMessage attribute to my class as follows: [SuppressMessage("Microsoft.Naming", "CA2218:OverrideGetHashCodeOnOverridingEquals", Justification="This class is not to be used as key in a hashtable.")] However, while reading further, I noticed the following: How to Fix Violations To fix a violation of this rule, provide an implementation of GetHashCode. For a pair of objects of the same type, you must ensure that the implementation returns the same value if your implementation of Equals returns true for the pair. When to Suppress Warnings ----- Do not suppress a warning from this rule. [arrow & emphasis mine] So, I'd like to know: Why shouldn't I suppress this warning as I was planning to? Doesn't my case warrant suppression? I don't want to code up an implementation of GetHashCode() for this object that will never get called, since my object will never be the key in a collection. If I wanted to be pedantic, instead of suppressing, would it be more reasonable for me to override GetHashCode() with an implementation that throws a NotImplementedException? Update: I just looked this subject up again in Bill Wagner's good book Effective C#, and he states in "Item 10: Understand the Pitfalls of GetHashCode()": If you're defining a type that won't ever be used as the key in a container, this won't matter. Types that represent window controls, web page controls, or database connections are unlikely to be used as keys in a collection. In those cases, do nothing. All reference types will have a hash code that is correct, even if it is very inefficient. [...] In most types that you create, the best approach is to avoid the existence of GetHashCode() entirely. ... that's where I originally got this idea that I need not be concerned about GetHashCode() always.

  Read the article

• What is "elegant" code?

  - by Breton

  I see a lot of lip service and talk about the most "elegant" way to do this or that. I think if you spend enough time programming you begin to obtain a sort of intuitive feel for what it is we call "elegance". But I'm curious. Even if we can look at a bit of code, and say instinctively "That's elegant", or "That's messy", I wonder if any of us really understands what that means. Is there a precise definition for this "elegance" we keep referring to? If there is, what is it? Now, what I mean by a precise definition, is a series of statements which can be used to derive questions about a peice of code, or a program as a whole, and determine objectively, or as objectively as possible, whether that code is "elegant" or not. May I assert, that perhaps no such definition exists, and it's all just personal preference. In this case, I ask you a slightly different question: Is there a better word for "elegance", or a better set of attributes to use for judging code quality that is perhaps more objective than merely appealing to individual intuition and taste? Perhaps code quality is a matter of taste, and the answer to both of my questions is "no". But I can't help but feel that we could be doing better than just expressing wishy washy feelings about our code quality. For example, user interface design is something that to a broad range of people looks for all the world like a field of study that oughtta be 100% subjective matter of taste. But this is shockingly and brutally not the case, and there are in fact many objective measures that can be applied to a user interface to determine its quality. A series of tests could be written to give a definitive and repeatable score to user interface quality. (See GOMS, for instance). Now, okay. is Elegance simply "code quality" or is it something more? Is it something that can be measured? Or is it a matter of taste? Does our profession have room for taste? Maybe I'm asking the wrong questions altogether. Help me out here. Bonus Round If there is such a thing as elegance in code, and that concept is useful, do you think that justifies classifying the field of programming as an "Art" capital A, or merely a "craft". Or is it just an engineering field populated by a bunch of wishful thinking humans? Consider this question in the light of your thoughts about the elegance question. Please note that there is a distinction between code which is considered "art" in itself, and code that was written merely in the service of creating an artful program. When I ask this question, I ask if the code itself justifies calling programming an art. Bounty Note I liked the answers to this question so much, I think I'd like to make a photographic essay book from it. Released as a free PDF, and published on some kind of on demand printing service of course, such as "zazz" or "tiggle" or "printley" or something . I'd like some more answers, please!

  Read the article

• Asp.net mvc application deployment / security issues

  - by WestDiscGolf

  I'll start with appologies; I wasn't sure if this was best posted here of Server Fault so if its in the wrong place then please move :-) Basic information I have written the first module of a new application at work. This is written using Visual Studio 2010, targetting .net 3.5 (at the moment) and asp.net mvc 2. This has been working fine during development running on the built in Development server from VS but however does not work once deployed to IIS 7/7.5. To deploy the application, I have built it in release mode and created a deployment package by right clicking on the project in the solution explorer (this will be done with an automated build in tfs once upgrade from the beta). This has then been imported into IIS on the server. The application is using windows/domain authentication. Issue #1 I can fire up internet explorer and browse to the application from a client computer as well as on a remote desktop connection. I can execute the code which reads/stores data in Session fine from the IE instance on the remote desktop but if I browse to it from the client pc it seems to lose the session state. I click on the form submit and the page refreshes and doesn't execute the required code. I've tried setting with; InProc, SQLServer and StateServer. but with no luck :-( Issue #2 As part of the application it views PDF and Tiff documents on the fly which are on a network share on the office network and creates thumbnails if the document hasn't been viewed before. This works if running on the machine the application is deployed to; however when browsing from a client pc I get an error saying: Access to the path '\\fileserver\folder\file.tif' is denied Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.UnauthorizedAccessException: Access to the path '\\fileserver\folder\file.TIF' is denied. ASP.NET is not authorized to access the requested resource. Consider granting access rights to the resource to the ASP.NET request identity. ASP.NET has a base process identity (typically {MACHINE}\ASPNET on IIS 5 or Network Service on IIS 6) that is used if the application is not impersonating. If the application is impersonating via , the identity will be the anonymous user (typically IUSR_MACHINENAME) or the authenticated request user. As this is on a different server the user is not accessible. To get round this I have tried: 1 - setting the application pool to run as domain administrator (I know this is a security risk, but I'm just trying to get it to work at the moment!) 2 - to set the log on account for World Wide Web Publishing service to be the domain admin . When trying to restart the service I get ... Windows could not start the World Wide Web Publishing Service service on the Local Computer. Error 1079: The account specified for this service is different from the account specified fro the other services running in the same process. Any pointers/help would be much appriciated as I'm pulling my hair out (of what little I have left). Update I've been using this funky little tool I found - DelegConfig v2 beta (Delegation / Kerberos Configuration Tool). This has been really usefull. So I've got the accessing of the file share working (there is a test page which will read the files) so now I've just got the issue of passing through the users credentials through to the SQL Server (wans't my choice to do it this way!!) to execute the queries etc. but I can't get it to log on as the user. It tries to access it as "NT Authority\Network Service" which doesn't have a sql login (as should be the logged on user). My connection string is: <add name="User" connectionString="Data Source=.;Integrated Security=True" providerName="System.Data.SqlClient" /> No initial catalog is specified as the system is over multiple dbs (also wasn't my choice!!). I really appriciate all the help so far! :-) Any further hints?!

  Read the article

• How can I make this Java code run faster?

  - by Martin Wiboe

  Hello all, I am trying to make a Java port of a simple feed-forward neural network. This obviously involves lots of numeric calculations, so I am trying to optimize my central loop as much as possible. The results should be correct within the limits of the float data type. My current code looks as follows (error handling & initialization removed): /** * Simple implementation of a feedforward neural network. The network supports * including a bias neuron with a constant output of 1.0 and weighted synapses * to hidden and output layers. * * @author Martin Wiboe */ public class FeedForwardNetwork { private final int outputNeurons; // No of neurons in output layer private final int inputNeurons; // No of neurons in input layer private int largestLayerNeurons; // No of neurons in largest layer private final int numberLayers; // No of layers private final int[] neuronCounts; // Neuron count in each layer, 0 is input // layer. private final float[][][] fWeights; // Weights between neurons. // fWeight[fromLayer][fromNeuron][toNeuron] // is the weight from fromNeuron in // fromLayer to toNeuron in layer // fromLayer+1. private float[][] neuronOutput; // Temporary storage of output from previous layer public float[] compute(float[] input) { // Copy input values to input layer output for (int i = 0; i < inputNeurons; i++) { neuronOutput[0][i] = input[i]; } // Loop through layers for (int layer = 1; layer < numberLayers; layer++) { // Loop over neurons in the layer and determine weighted input sum for (int neuron = 0; neuron < neuronCounts[layer]; neuron++) { // Bias neuron is the last neuron in the previous layer int biasNeuron = neuronCounts[layer - 1]; // Get weighted input from bias neuron - output is always 1.0 float activation = 1.0F * fWeights[layer - 1][biasNeuron][neuron]; // Get weighted inputs from rest of neurons in previous layer for (int inputNeuron = 0; inputNeuron < biasNeuron; inputNeuron++) { activation += neuronOutput[layer-1][inputNeuron] * fWeights[layer - 1][inputNeuron][neuron]; } // Store neuron output for next round of computation neuronOutput[layer][neuron] = sigmoid(activation); } } // Return output from network = output from last layer float[] result = new float[outputNeurons]; for (int i = 0; i < outputNeurons; i++) result[i] = neuronOutput[numberLayers - 1][i]; return result; } private final static float sigmoid(final float input) { return (float) (1.0F / (1.0F + Math.exp(-1.0F * input))); } } I am running the JVM with the -server option, and as of now my code is between 25% and 50% slower than similar C code. What can I do to improve this situation? Thank you, Martin Wiboe

  Read the article

• c - dereferencing issue

  - by Joe

  Hi, I have simplified an issue that I've been having trying to isolate the problem, but it is not helping. I have a 2 dimensional char array to represent memory. I want to pass a reference to that simulation of memory to a function. In the function to test the contents of the memory I just want to iterate through the memory and print out the contents on each row. The program prints out the first row and then I get seg fault. My program is as follows: #include <stdio.h> #include <stdlib.h> #include <ctype.h> #include <string.h> void test_memory(char*** memory_ref) { int i; for(i = 0; i < 3; i++) { printf("%s\n", *memory_ref[i]); } } int main() { char** memory; int i; memory = calloc(sizeof(char*), 20); for(i = 0; i < 20; i++) { memory[i] = calloc(sizeof(char), 33); } memory[0] = "Mem 0"; memory[1] = "Mem 1"; memory[2] = "Mem 2"; printf("memory[1] = %s\n", memory[1]); test_memory(&memory); return 0; } This gives me the output: memory[1] = Mem 1 Mem 0 Segmentation fault If I change the program and create a local version of the memory in the function by dereferencing the memory_ref, then I get the right output: So: #include <stdio.h> #include <stdlib.h> #include <ctype.h> #include <string.h> void test_memory(char*** memory_ref) { char** memory = *memory_ref; int i; for(i = 0; i < 3; i++) { printf("%s\n", memory[i]); } } int main() { char** memory; int i; memory = calloc(sizeof(char*), 20); for(i = 0; i < 20; i++) { memory[i] = calloc(sizeof(char), 33); } memory[0] = "Mem 0"; memory[1] = "Mem 1"; memory[2] = "Mem 2"; printf("memory[1] = %s\n", memory[1]); test_memory(&memory); return 0; } gives me the following output: memory[1] = Mem 1 Mem 0 Mem 1 Mem 2 which is what I want, but making a local version of the memory is useless because I need to be able to change the values of the original memory from the function which I can only do by dereferencing the pointer to the original 2d char array. I don't understand why I should get a seg fault on the second time round, and I'd be grateful for any advice. Many thanks Joe

  Read the article

• Function calls not working in my page

  - by Vivek Dragon

  I made an select menu that works with the google-font-Api. I made to function in JSBIN here is my work http://jsbin.com/ocutuk/18/ But when i made the copy of my code in a html page its not even loading the font names in page. i tried to make it work but still it is in dead end. This is my html code <!DOCTYPE html> <html> <head> <script src="http://ajax.googleapis.com/ajax/libs/jquery/1/jquery.min.js"> </script> <meta charset=utf-8 /> <title>FONT API</title> <script> function SetFonts(fonts) { for (var i = 0; i < fonts.items.length; i++) { $('#styleFont') .append($("<option></option>") .attr("value", fonts.items[i].family) .text(fonts.items[i].family)); } } var script = document.createElement('script'); script.src = 'https://www.googleapis.com/webfonts/v1/webfonts?key=AIzaSyB8Ua6XIfe-gqbkE8P3XL4spd0x8Ft7eWo&callback=SetFonts'; document.body.appendChild(script); WebFontConfig = { google: { families: ['ABeeZee', 'Abel', 'Abril Fatface', 'Aclonica', 'Acme', 'Actor', 'Adamina', 'Advent Pro', 'Aguafina Script', 'Akronim', 'Aladin', 'Aldrich', 'Alegreya', 'Alegreya SC', 'Alex Brush', 'Alfa Slab One', 'Alice', 'Alike', 'Alike Angular', 'Allan', 'Allerta', 'Allerta Stencil', 'Allura', 'Almendra', 'Almendra Display', 'Almendra SC', 'Amarante', 'Amaranth', 'Amatic SC', 'Amethysta', 'Anaheim', 'Andada', 'Andika', 'Angkor', 'Annie Use Your Telescope', 'Anonymous Pro', 'Antic', 'Antic Didone', 'Antic Slab', 'Anton', 'Arapey', 'Arbutus', 'Arbutus Slab', 'Architects Daughter', 'Archivo Black', 'Archivo Narrow', 'Arimo', 'Arizonia', 'Armata', 'Artifika', 'Arvo', 'Asap', 'Asset', 'Astloch', 'Asul', 'Atomic Age', 'Aubrey', 'Audiowide', 'Autour One', 'Average', 'Average Sans', 'Averia Gruesa Libre', 'Averia Libre', 'Averia Sans Libre', 'Averia Serif Libre', 'Bad Script', 'Balthazar', 'Bangers', 'Basic', 'Battambang', 'Baumans', 'Bayon', 'Belgrano', 'Belleza', 'BenchNine', 'Bentham', 'Berkshire Swash', 'Bevan', 'Bigelow Rules', 'Bigshot One', 'Bilbo', 'Bilbo Swash Caps', 'Bitter', 'Black Ops One', 'Bokor', 'Bonbon', 'Boogaloo', 'Bowlby One', 'Bowlby One SC', 'Brawler', 'Bree Serif', 'Bubblegum Sans', 'Bubbler One', 'Buda', 'Buenard', 'Butcherman', 'Butterfly Kids', 'Cabin', 'Cabin Condensed', 'Cabin Sketch', 'Caesar Dressing', 'Cagliostro', 'Calligraffitti', 'Cambo', 'Candal', 'Cantarell', 'Cantata One', 'Cantora One', 'Capriola', 'Cardo', 'Carme', 'Carrois Gothic', 'Carrois Gothic SC', 'Carter One', 'Caudex', 'Cedarville Cursive', 'Ceviche One', 'Changa One', 'Chango', 'Chau Philomene One', 'Chela One', 'Chelsea Market', 'Chenla', 'Cherry Cream Soda', 'Cherry Swash', 'Chewy', 'Chicle', 'Chivo', 'Cinzel', 'Cinzel Decorative', 'Clicker Script', 'Coda', 'Coda Caption', 'Codystar', 'Combo', 'Comfortaa', 'Coming Soon', 'Concert One', 'Condiment', 'Content', 'Contrail One', 'Convergence', 'Cookie', 'Copse', 'Corben', 'Courgette', 'Cousine', 'Coustard', 'Covered By Your Grace', 'Crafty Girls', 'Creepster', 'Crete Round', 'Crimson Text', 'Croissant One', 'Crushed', 'Cuprum', 'Cutive', 'Cutive Mono']} }; (function() { var wf = document.createElement('script'); wf.src = ('https:' == document.location.protocol ? 'https' : 'http') + '://ajax.googleapis.com/ajax/libs/webfont/1/webfont.js'; wf.type = 'text/javascript'; wf.async = 'true'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(wf, s); })(); $("#styleFont").change(function (){ var id =$('#styleFont option' +':selected').val(); $("#custom_text").css('font-family',id); }); </script> <style> #custom_text { font-family: Arial; resize: none; margin-top: 20px; width: 500px; } #styleFont { width: 100px; } </style> </head> <body> <select id="styleFont"> </select><br> <textarea id="custom_text"></textarea> </body> </html> How can i make it work. Whats the mistake i am making here.

  Read the article

• PHP MINISERVER DOWNLOAD RESUME-ERROR! Resource id # 4

  - by snikolov

  $httpsock = @socket_create_listen("9090"); if (!$httpsock) { print "Socket creation failed!\n"; exit; } while (1) { $client = socket_accept($httpsock); $input = trim(socket_read ($client, 4096)); $input = explode(" ", $input); $range = $input[12]; $input = $input[1]; $fileinfo = pathinfo($input); switch ($fileinfo['extension']) { default: $mime = "text/html"; } if ($input == "/") { $input = "index.html"; } $input = ".$input"; if (file_exists($input) && is_readable($input)) { echo "Serving $input\n"; $contents = file_get_contents($input); $output = "HTTP/1.0 200 OK\r\nServer: APatchyServer\r\nConnection: close\r\nContent-Type: $mime\r\n\r\n$contents"; } else { //$contents = "The file you requested doesn't exist. Sorry!"; //$output = "HTTP/1.0 404 OBJECT NOT FOUND\r\nServer: BabyHTTP\r\nConnection: close\r\nContent-Type: text/html\r\n\r\n$contents"; if(isset($range)) { list($a, $range) = explode("=",$range); str_replace($range, "-", $range); $size2 = $size-1; $new_length = $size-$range; $output = "HTTP/1.1 206 Partial Content\r\n"; $output .= "Content-Length: $new_length\r\n"; $output .= "Content-Range: bytes $range$size2/$size\r\n"; } else { $size2=$size-1; $output .= "Content-Length: $new_length\r\n"; } $chunksize = 1*(1024*1024); $bytes_send = 0; $file = "a.mp3"; $filesize = filesize($file); if ($file = fopen($file, 'r')) { if(isset($range)) $output = 'HTTP/1.0 200 OK\r\n'; $output .= "Content-type: application/octet-stream\r\n"; $output .= "Content-Length: $filesize\r\n"; $output .= 'Content-Disposition: attachment; filename="'.$file.'"\r\n'; $output .= "Accept-Ranges: bytes\r\n"; $output .= "Cache-Control: private\n\n"; fseek($file, $range); $download_rate = 1000; while(!feof($file) and (connection_status()==0)) { $var_stat = fread($file, round($download_rate *1024)); $output .= $var_stat;//echo($buffer); // is also possible flush(); sleep(1);//// decrease download speed } fclose($file); } /** $filename = "dada"; $file = fopen($filename, 'r'); $filesize = filesize($filename); $buffer = fread($file, $filesize); $send = array("Output"=$buffer,"filesize"=$filesize,"filename"=$filename); $file = $send['filename']; */ //@ob_end_clean(); // $output .= "Content-Transfer-Encoding: binary"; //$output .= "Connection: Keep-Alive\r\n"; } socket_write($client, $output); socket_close ($client); } socket_close ($httpsock); hey guys i have create a miniwebserver downloader it can download files from your server, however i am unable to resume my download when i download the file i get Resource id # 4 and also i cant resume the download,i would like to know how i can monitor record the client output how much bandwidth he has downloaded perl has something like this put its hardcore if possible kindly provide me with some pointers thank you :)

  Read the article

• Boost::Spirit::Qi autorules -- avoiding repeated copying of AST data structures

  - by phooji

  I've been using Qi and Karma to do some processing on several small languages. Most of the grammars are pretty small (20-40 rules). I've been able to use autorules almost exclusively, so my parse trees consist entirely of variants, structs, and std::vectors. This setup works great for the common case: 1) parse something (Qi), 2) make minor manipulations to the parse tree (visitor), and 3) output something (Karma). However, I'm concerned about what will happen if I want to make complex structural changes to a syntax tree, like moving big subtrees around. Consider the following toy example: A grammar for s-expr-style logical expressions that uses autorules... // Inside grammar class; rule names match struct names... pexpr %= pand | por | var | bconst; pand %= lit("(and ") >> (pexpr % lit(" ")) >> ")"; por %= lit("(or ") >> (pexpr % lit(" ")) >> ")"; pnot %= lit("(not ") >> pexpr >> ")"; ... which leads to parse tree representation that looks like this... struct var { std::string name; }; struct bconst { bool val; }; struct pand; struct por; struct pnot; typedef boost::variant<bconst, var, boost::recursive_wrapper<pand>, boost::recursive_wrapper<por>, boost::recursive_wrapper<pnot> > pexpr; struct pand { std::vector<pexpr> operands; }; struct por { std::vector<pexpr> operands; }; struct pnot { pexpr victim; }; // Many Fusion Macros here Suppose I have a parse tree that looks something like this: pand / ... \ por por / \ / \ var var var var (The ellipsis means 'many more children of similar shape for pand.') Now, suppose that I want negate each of the por nodes, so that the end result is: pand / ... \ pnot pnot | | por por / \ / \ var var var var The direct approach would be, for each por subtree: - create pnot node (copies por in construction); - re-assign the appropriate vector slot in the pand node (copies pnot node and its por subtree). Alternatively, I could construct a separate vector, and then replace (swap) the pand vector wholesale, eliminating a second round of copying. All of this seems cumbersome compared to a pointer-based tree representation, which would allow for the pnot nodes to be inserted without any copying of existing nodes. My question: Is there a way to avoid copy-heavy tree manipulations with autorule-compliant data structures? Should I bite the bullet and just use non-autorules to build a pointer-based AST (e.g., http://boost-spirit.com/home/2010/03/11/s-expressions-and-variants/)?

  Read the article

• Why can't my program display this dialog box, while another program can?

  - by nonoitall

  I'm trying to write a wrapper for Winamp input plugins and have hit a bit of a snag. I'd like my wrapper to be able to display a plugin's configuration dialog, which is (or should be) achieved by calling the plugin's Config(HWND hwndParent) function. For most plugins, this works fine and my program is able to display the plugin's configuration dialog. However, 64th Note (a plugin for playing USF files) is giving me problems. Winamp can display its configuration dialog just fine, but whenever I try to display it from my wrapper, the dialog gets destroyed before it ever shows itself. Thankfully, 64th Note is open source, so I took a look at its innards to try and get an idea of what's going wrong. I've trimmed off the irrelevant bits and am left with this: Config function in the plugin (should show configuration dialog): void Config(HWND hwndParent) { DialogBox(slave, (const char *) IDD_CONFIG_WINDOW, NULL, configDlgProc); } (Slave is the plugin DLL's HINSTANCE handle.) The proc for the dialog is as follows (I have stripped out all the functionality, since it doesn't appear to have an influence on this problem): BOOL CALLBACK configDlgProc(HWND hDlg, UINT uMsg, WPARAM wParam, LPARAM lParam) { return 0; } The template for IDD_CONFIG_WINDOW is as follows: IDD_CONFIG_WINDOW DIALOGEX 0, 0, 269, 149 STYLE DS_SETFONT | DS_MODALFRAME | WS_POPUP | WS_CAPTION | WS_SYSMENU CAPTION "64th Note configuration" FONT 8, "MS Sans Serif", 0, 0, 0x0 BEGIN DEFPUSHBUTTON "OK",IDOK,212,38,50,14 CONTROL "Play Forever",IDC_NOLENGTH,"Button",BS_AUTORADIOBUTTON,7,7,55,8 CONTROL "Always Use Default Length",IDC_SETLEN,"Button",BS_AUTORADIOBUTTON,7,17,101,8 CONTROL "Default Length",IDC_DEFLEN,"Button",BS_AUTORADIOBUTTON,7,29,63,8 EDITTEXT IDC_DEFLENVAL,71,28,38,12,ES_AUTOHSCROLL EDITTEXT IDC_DEFFADEVAL,71,42,38,12,ES_AUTOHSCROLL CONTROL "Detect Silence",IDC_DETSIL,"Button",BS_AUTOCHECKBOX | WS_TABSTOP,7,56,63,8 EDITTEXT IDC_DETSILVAL,71,56,38,12,ES_AUTOHSCROLL CONTROL "Slider2",IDC_PRISLIDER,"msctls_trackbar32",TBS_AUTOTICKS | WS_TABSTOP,74,90,108,11 EDITTEXT IDC_TITLEFMT,7,127,255,15,ES_AUTOHSCROLL CONTROL "Default to file name on missing field",IDC_FNONMISSINGTAG, "Button",BS_AUTOCHECKBOX | WS_TABSTOP,50,114,124,8 CONTROL "Use Recompiler CPU",IDC_RECOMPILER,"Button",BS_AUTOCHECKBOX | WS_TABSTOP,145,7,83,8 CONTROL "Round Frequency",IDC_ROUNDFREQ,"Button",BS_AUTOCHECKBOX | WS_TABSTOP,145,16,73,8 CONTROL "Seek Backwards",IDC_BACKWARDS,"Button",BS_AUTOCHECKBOX | WS_TABSTOP,145,26,70,8 CONTROL "Fast Seek",IDC_FASTSEEK,"Button",BS_AUTOCHECKBOX | WS_TABSTOP,145,35,48,8 CONTROL "RSP Sections",IDC_SECTIONS,"Button",BS_AUTOCHECKBOX | WS_TABSTOP,145,45,60,8 CONTROL "Soft Amplify",IDC_SOFTAMP,"Button",BS_AUTOCHECKBOX | WS_TABSTOP,145,54,53,8 CONTROL "Audio HLE",IDC_AUDIOHLE,"Button",BS_AUTOCHECKBOX | WS_TABSTOP,145,63,50,8 CONTROL "Auto Audio HLE",IDC_AUTOAUDIOHLE,"Button",BS_AUTOCHECKBOX | WS_TABSTOP,145,72,64,8 CONTROL "Display Errors",IDC_DISPERROR,"Button",BS_AUTOCHECKBOX | WS_TABSTOP,145,81,58,8 EDITTEXT IDC_RELVOL,211,104,28,12,ES_AUTOHSCROLL PUSHBUTTON "Cancel",IDCANCEL,212,54,50,14 PUSHBUTTON "Help",IDHELPBUTTON,212,71,50,14 LTEXT "Title format:",IDC_STATIC,7,113,38,8 LTEXT "seconds",IDC_STATIC,112,29,28,8 LTEXT "Default Fade",IDC_STATIC,19,43,42,8 LTEXT "seconds",IDC_STATIC,112,43,28,8 LTEXT "seconds",IDC_STATIC,112,57,28,8 CTEXT "CPU Thread Priority",IDC_STATIC,7,91,63,8 CTEXT "Look ma, I'm data!",IDC_CPUPRI,75,104,108,8 LTEXT "Relative Volume",IDC_STATIC,199,94,52,8 LTEXT "Fade Type",IDC_STATIC,7,75,35,8 COMBOBOX IDC_FADETYPE,45,72,87,74,CBS_DROPDOWNLIST | WS_TABSTOP END Naturally, without any substance in the proc function, the dialog doesn't have any functionality, but it still displays in Winamp when the Config function is invoked. However, it does not appear when I invoke it from my wrapper program. When I monitored the messages sent to the dialog in its proc function, I saw that WM_DESTROY and WM_NCDESTROY were sent within the first few messages, though I have no clue as to why. If I change the Config function so that it displays the plugin's About dialog instead of its configuration dialog, both Winamp and my wrapper will display the About dialog, which suggests that there is something unique to the configuration dialog template that's causing the problem. The modified Config function reads like so: void Config(HWND hwndParent) { DialogBox(slave, (const char *) IDD_ABOUTBOX, NULL, configDlgProc); } The template for the About dialog is as follows: IDD_ABOUTBOX DIALOGEX 0, 0, 152, 151 STYLE DS_SETFONT | DS_MODALFRAME | WS_POPUP | WS_CAPTION | WS_SYSMENU CAPTION "About 64th Note" FONT 8, "MS Sans Serif", 0, 0, 0x1 BEGIN LTEXT "64th Note v1.2 beta 3\nBased on Project 64 1.6 by Zilmar and Jabo\nAudio HLE by Azimer\nPSF concept and tagging by Neill Corlett\nPlayer by hcs, Josh W, dr0\nhttp://hcs64.com/usf",IDC_STATIC,7,94,138,50 CONTROL 110,IDC_STATIC,"Static",SS_BITMAP,26,7,95,86,WS_EX_DLGMODALFRAME END Like I said, my wrapper displays the About dialog just fine, as does Winamp. Why can Winamp display the Config dialog, while my wrapper cannot?

  Read the article

• Delphi7 - How can i copy a file that is being written to

  - by Simon

  I have an application that logs information to a daily text file every second on a master PC. A Slave PC on the network using the same application would like to copy this text file to its local drive. I can see there is going to be file access issues. These files should be no larger than 30-40MB each. the network will be 100MB ethernet. I can see there is potential for the copying process to take longer than 1 second meaning the logging PC will need to open the file for writing while it is being read. What is the best method for the file writing(logging) and file copying procedures? I know there is the standard Windows CopyFile() procedure, however this has given me file access problems. There is also TFileStream using the fmShareDenyNone flag, but this also very occasionally gives me an access problem too (like 1 per week). What is this the best way of accomplishing this task? My current File Logging: procedure FSWriteline(Filename,Header,s : String); var LogFile : TFileStream; line : String; begin if not FileExists(filename) then begin LogFile := TFileStream.Create(FileName, fmCreate or fmShareDenyNone); try LogFile.Seek(0,soFromEnd); line := Header + #13#10; LogFile.Write(line[1],Length(line)); line := s + #13#10; LogFile.Write(line[1],Length(line)); finally logfile.Free; end; end else begin line := s + #13#10; Logfile:=tfilestream.Create(Filename,fmOpenWrite or fmShareDenyNone); try logfile.Seek(0,soFromEnd); Logfile.Write(line[1], length(line)); finally Logfile.free; end; end; end; My file copy procedure: procedure DoCopy(infile, Outfile : String); begin ForceDirectories(ExtractFilePath(outfile)); //ensure folder exists if FileAge(inFile) = FileAge(OutFile) then Exit; //they are the same modified time try { Open existing destination } fo := TFileStream.Create(Outfile, fmOpenReadWrite or fmShareDenyNone); fo.Position := 0; except { otherwise Create destination } fo := TFileStream.Create(OutFile, fmCreate or fmShareDenyNone); end; try { open source } fi := TFileStream.Create(InFile, fmOpenRead or fmShareDenyNone); try cnt:= 0; fi.Position := cnt; max := fi.Size; {start copying } Repeat dod := BLOCKSIZE; // Block size if cnt+dod>max then dod := max-cnt; if dod>0 then did := fo.CopyFrom(fi, dod); cnt:=cnt+did; Percent := Round(Cnt/Max*100); until (dod=0) finally fi.free; end; finally fo.free; end; end;

  Read the article

• PHP mini-server download resulme-error! Resource id # 4

  - by snikolov

  <?php $httpsock = @socket_create_listen("9090"); if (!$httpsock) { print "Socket creation failed!\n"; exit; } while (1) { $client = socket_accept($httpsock); $input = trim(socket_read ($client, 4096)); $input = explode(" ", $input); $range = $input[12]; $input = $input[1]; $fileinfo = pathinfo($input); switch ($fileinfo['extension']) { default: $mime = "text/html"; } if ($input == "/") { $input = "index.html"; } $input = ".$input"; if (file_exists($input) && is_readable($input)) { echo "Serving $input\n"; $contents = file_get_contents($input); $output = "HTTP/1.0 200 OK\r\nServer: APatchyServer\r\nConnection: close\r\nContent-Type: $mime\r\n\r\n$contents"; } else { //$contents = "The file you requested doesn't exist. Sorry!"; //$output = "HTTP/1.0 404 OBJECT NOT FOUND\r\nServer: BabyHTTP\r\nConnection: close\r\nContent-Type: text/html\r\n\r\n$contents"; if(isset($range)) { list($a, $range) = explode("=",$range); str_replace($range, "-", $range); $size2 = $size-1; $new_length = $size-$range; $output = "HTTP/1.1 206 Partial Content\r\n"; $output .= "Content-Length: $new_length\r\n"; $output .= "Content-Range: bytes $range$size2/$size\r\n"; } else { $size2=$size-1; $output .= "Content-Length: $new_length\r\n"; } $chunksize = 1*(1024*1024); $bytes_send = 0; $file = "a.mp3"; $filesize = filesize($file); if ($file = fopen($file, 'r')) { if(isset($range)) $output = 'HTTP/1.0 200 OK\r\n'; $output .= "Content-type: application/octet-stream\r\n"; $output .= "Content-Length: $filesize\r\n"; $output .= 'Content-Disposition: attachment; filename="'.$file.'"\r\n'; $output .= "Accept-Ranges: bytes\r\n"; $output .= "Cache-Control: private\n\n"; fseek($file, $range); $download_rate = 1000; while(!feof($file) and (connection_status()==0)) { $var_stat = fread($file, round($download_rate *1024)); $output .= $var_stat;//echo($buffer); // is also possible flush(); sleep(1);//// decrease download speed } fclose($file); } /** $filename = "dada"; $file = fopen($filename, 'r'); $filesize = filesize($filename); $buffer = fread($file, $filesize); $send = array("Output"=>$buffer,"filesize"=>$filesize,"filename"=>$filename); $file = $send['filename']; */ //@ob_end_clean(); // $output .= "Content-Transfer-Encoding: binary"; //$output .= "Connection: Keep-Alive\r\n"; } socket_write($client, $output); socket_close ($client); } socket_close ($httpsock); Hey guys, I haved create a miniwebserver downloader. It can download files from your server. However, I am unable to resume my download when I download the file – I get Resource id # 4 – and I also can't resume the download. I would like to know how I can monitor and record the client output and how much bandwidth he has downloaded. Perl has something like this, but it's hardcore; if possible, kindly provide me with some pointers thank you :)

  Read the article

< Previous Page | 70 71 72 73 74 75 76 77 78 79  | Next Page >