Search Results

Search found 9963 results on 399 pages for 'special commands'.

Page 74/399 | < Previous Page | 70 71 72 73 74 75 76 77 78 79 80 81  | Next Page >

• Upgrading to 12.10 on an external hard drive

  - by Tom Childers

  I did some googling on this and didn't find anything specific for my situation. I currently have 12.04 installed on an external USB hard drive. It's working great. I want to upgrade it to 12.10. My bandwidth is very limited so I have a friend who will download 12.10 for me and put it on a flash stik. Then I can upgrade without having to do the download myself. Which particular version of the 12.10 download file(s) should I get? Are there alternate 12.10 downloads that have all the packages? How do I set it up so when I upgrade 12.04 I can specify that it look in some local repository for the 12.10 files? Can I just dump the 12.10 files in some local directory? Or do I have do go thru some complex commands to create a local repository? I'm pretty new to Linux so a long process of complex terminal commands will probably be a show stopper for me. Remember that my 12.04 install resides on an external hard drive. And I have a laptop with multiple USB ports. Thanks! Advait

  Read the article

• More NASM with GVim

  - by MarkPearl

  Today I am bashing around with nasm again… some useful things I found… Set the current working directory of gvim to the current file path I have found setting the current working directory of gvim to the file location is very useful, especially if you are wanting to use commands in gvim to run your compiled code. It can be done by typing in the following in the command mode in gvim… cd %:p:h Once you have set it, you can use the ! to run commands you would normally run in the dos shell.. e.g. !dir Compiling code to make an executable There are three thing you need to specify to compile a basic file in name, they are… The output file format The output file name The source file name An example of this would be the following (where you have a file called temp.asm which is the source file) nasm –f bin temp.asm –o temp.com Output file format The –f specifies the output file format (in this case a binary file). To get a list of the available output file formats you can type nasm –hf (for my installation bin is the default, in which case I can omit it) Output file name This is just the name you want the compiled file to be called. For windows machines I specify .com as my default format.

  Read the article

• How do I get a different type of scrollbars in 12.04? [closed]

  - by Joseph Garvin

  Possible Duplicate: How do I disable overlay scrollbars? By default 12.04 uses overlay scroll bars that do not suit my taste, and every method I've found so far of disabling them makes them broken in a different way. When I was using 11.10 this wasn't a problem because I could still change the GTK theme. In 12.04, the Appearance settings only contain a few stock themes, and other than the special purpose contrast ones they all have the overlay scroll bars. If I aptitude search gtk3 | grep theme I get no results so there appears to be no packaged alternative either. Most suggestions I've seen for disabling the overlay scroll bars involve uninstalling packages or editing files as root. I want to disable them just for the current user, not for everyone on the whole box; as should be the case for any theme/display setting. There is a gsettings command that temporarily disables the overlay scrollbars just for the current user, but this has two problems of its own: The setting doesn't stick after log off. Because who would want to save settings? The scroll bars put in place have no contrast. They have a black scroller on a black background and are completely unusable. In short what I'd like to know is how to disable overlay scroll bars such that: My preference is user specific. My preference is actually saved. The scroller can actually be seen against the background without having to use a special high contrast theme that makes my whole desktop look like a negative photo from Tron.

  Read the article

• Changing the Default Install Location of an MSI

  - by PSteele

  A few months ago, I had to tweak an MSI installer.  It was installing into a specific directory (named the same as the application) underneath Program Files.  Since the location of Program Files can change from machine to machine, the MSI has a special token you can use for Program Files (as well as for the application name).  So the current value for “DefaultLocation” of the Application Folder was: [ProgramFilesFolder]\[ProductName] During installation, these tokens would be replaced by the actual location based on the current machine. I needed to change this to a specific folder underneath the users My Documents directory.  I poked around the help file and I could not find where these special tokens (like “[ProgramFilesFolder]”) were defined.  Obviously, there must be some specific set of values that are available and I’m sure My Documents is one of them. I finally found them documented so I’m posting the link here.  Hopefully, it will help someone else out.  Not sure where I found this link… System Folder Properties For me, it was as easy as changing the DefaultLocation to: [PersonalFolder]\MyToolName\Application Technorati Tags: .NET,MSI

  Read the article

• Unity no longer loads in 13.04 for main user

  - by user152973

  When Ubuntu starts up, Unity fails to load (I can only see my desktop with no unity sidebar and no system bar in the top right). I tried the advice of Unity does not start in Ubuntu 13.04 which recommended the following commands: dconf reset -f /org/compiz/ unity --reset-icons &disown I ran the commands without errors an restarted the computer, but the problem persists. I am currently running Gnome. I have looked at other pages from the Google search "ubuntu unity failed to load 13.04", but the advice was similar to above and seems to be concerned with a system upgrade in April 18, 2013. I suspect my issue is something far more recent. Please give me advice on how to restore Unity on my account or at least figure out what the problem is. Thank you. Some information that might be relevant: -Unity has worked fine on 13.04 for the 6 months that I've had it until today. (November 10, 2013) -I have set up the update tool to automatically update when available. It is very possible that the system applied some updates without my knowledge. -Interestingly, Unity works fine on the Guest account. -I have made it so the system automatically logs me in at start-up. -This is a personal laptop. No one else has access to it. -I was not doing anything with the system settings or the terminal and have not installed any new software for the past 3 days. -I am running the System76 native Linux laptop Ultra Lemur. I did not contact their support yet because it seemed unlikely that this is a System76-specific error.

  Read the article

• Trying to wrap my head around class structure for domain-specific language

  - by svaha

  My work is mostly in embedded systems programming in C, and the proper class structure to pull this off eludes me. Currently we communicate via C# and Visual Basic with a large collection of servos, pumps, and sensors via a USB-to-CAN hid device. Right now, it is quite cumbersome to communicate with the devices. To read the firmware version of controller number 1 you would use: SendCan(Controller,1,ReadFirmwareVersion) or SendCan(8,1,71) This sends three bytes on the CAN bus: (8,1,71) Connected to controllers are various sensors. SendCan(Controller,1,PassThroughCommand,O2Sensor,2,ReadO2) would tell Controller number 1 to pass a command to O2 Sensor number 2 to read O2 by sending the bytes 8,1,200,16,2,0 I would like to develop a domain-specific language for this setup. Instead of commands issued like they are currently, commands would be written like this: Controller1.SendCommand.O2Sensor2.ReadO2 to send the bytes 8,1,200,16,0 What's the best way to do this? Some machines have 20 O2 Sensors, others have 5 controllers, so the numbers and types of controllers and sensors, pumps, etc. aren't static.

  Read the article

• Why is MediaWiki auto-linking the word “files”

  - by dfrankow

  Our MediaWiki installation is auto-linking the word "files". So Here are some files: a, b, c would result in the word "files" being linked to http://ourhost/mediawiki/files. Why is that happening and how do I make it stop? I can use the nowiki tag, but perhaps it does not surprise you that the word "files" appears often, and it is aggravating to use that tag all the time. Here is some info on our MediaWiki installation from Special:Version. Yes, it's old. Installed software Product Version MediaWiki 1.16.5 PHP 5.2.14-pl0-gentoo (apache2handler) MySQL 5.0.84 Installed extensions Parser hooks GoogleDocs4MW (Version 1.1) Adds tag for Google Docs' spreadsheets display Jack Phoenix SyntaxHighlight (Version 1.0.8.6) Provides syntax highlighting using GeSHi Highlighter Brion Vibber, Tim Starling, Rob Church and Niklas Laxström WebServiceSequenceDiagram(Version 1.0) Render inline sequence diagrams using websequencediagrams.com Eddie Olsson Other MWSearch MWSearch plugin Kate Turner and Brion Vibber Extension functions efLucenePrefixSetup Parser extension tags gallery, googlespreadsheet, html, nowiki, pre, sequencediagram, source and syntaxhighlight Parser function hooks anchorencode, basepagename, basepagenamee, defaultsort, displaytitle, filepath, formatdate, formatnum, fullpagename, fullpagenamee, fullurl, fullurle, gender, grammar, int, language, lc, lcfirst, localurl, localurle, namespace, namespacee, ns, nse, numberingroup, numberofactiveusers, numberofadmins, numberofarticles, numberofedits, numberoffiles, numberofpages, numberofusers, numberofviews, padleft, padright, pagename, pagenamee, pagesincategory, pagesize, plural, protectionlevel, special, subjectpagename, subjectpagenamee, subjectspace, subjectspacee, subpagename, subpagenamee, tag, talkpagename, talkpagenamee, talkspace, talkspacee, uc, ucfirst and urlencode

  Read the article

• How to pass dynamic information between a form and a service? [closed]

  - by qminator

  I have a design problem and hopefully the braintrust which is stack exchange can help. I have a generic form, which loads a dataset and displays it. It never has direct knowledge of what it contains but can pass it to a service for manipulation (via an Onclick event for example). However, the form might need to alter its behaviour based on the manipulation by the service. Example: The service realises this dataset requires sending of an email by the user and needs to send an instruction to the form to open up a mail form. My idea is thus: I'm thinking about passing back some type of key/name dictionary, filled with commands which the service requires. They could then be interpeted by the form without it need to reference something specific. Example: IF the service decides that the dataset needs to refresh it would send back a key/name pair, I might even be able to chain commands. Refreshing the dataset and sending a mail. Refresh / "Foo" Mail / "[email protected]" The form would reference an action explicitly (Refresh or Mail) but not the instructions themselves. Is this a valid idea or am I wasting time?

  Read the article

• How do I add more than one command to /etc/rc.local?

  - by Andreas

  I want to add two power saving commands to /etc/rc.local file. This to dissable bluetooth: rfkill block bluetooth And this to reduce screen brightness: echo 3024 > /sys/class/backlight/intel_backlight/brightness Separately added to /etc/rc.local they work but not both of them together like this: #/bin/sh -e # # rc.local # # This script is executed at the end of each multiuser runlevel. # Make sure that the script will "exit 0" on success or any other # value on error. # # In order to enable or disable this script just change the execution # bits. # # By default this script does nothing. echo 3024 > /sys/class/backlight/intel_backlight/brightness rfkill block bluetooth exit 0 How do I add the two commands to get them properly executed at start-up? Update It turned out to be a timing issue. I fixed it by delaying the execution of the first command thus: (sleep 5; echo 3021 > /sys/class/backlight/intel_backlight/brightness)&

  Read the article

• OOP Design: relationship between entity classes

  - by beginner_

  I have at first sight a simple issue but can't wrap my head around on how to solve. I have an abstract class Compound. A Compound is made up of Structures. Then there is also a Container which holds 1 Compound. A "special" implementation of Compound has Versions. For that type of Compound I want the Container to hold the Versionof the Compound and not the Compound itself. You could say "just create an interface Containable" and a Container holds 1 Containable. However that won't work. The reason is I'm creating a framework and the main part of that framework is to simplify storing and especially searching for special data type held by Structure objects. Hence to search for Containers which contain a Compound made up of a specific Structure requires that the "Path" from Containerto Structure is well defined (Number of relationships or joins). I hope this was understandable. My question is how to design the classes and relationships to be able to do what I outlined.

  Read the article

• Managing TFS Workspaces

  - by Enrique Lima

  You are the administrator (or since you may be the one that knows the most about it) and you need to do some cleanup on what is connected and perhaps even cleanup after people that have left the organization and left some code checked out in their workspace. What permissions do I need? You will need to have Administer Workspaces permission to perform the following tasks. The commands. In order to execute the commands, you will need to open a Visual Studio Command Prompt, once there you will be able to use the tf command.  This has a nice set of options, which I will be providing a listing for later on in another post. To list all workspaces registered: tf workspaces /collection:<url to your TPC> <workspace>;<owner> To delete a specific workspace: tf workspace /delete /server:<url to your TPC> <workspace>;<owner> If for any reason a workspace has embedded spaces, then surround that with “” (double quotes).

  Read the article

• Ubuntu 12.10 Quantal Quetzal and AMD 12.11 Beta Driver

  - by White

  I'm using a Quantal AMDx64 install and a XFX Radeon HD5850 video card. I first enabled restricted drivers through additional drivers, but it resulted in breaking Unity and Compiz (I can only see my wallpaper and shortcuts. But the terminal still works and Nautilus too, however, without Close/Maximize/Minimize and slower). Then I uninstalled it and everything went back to normal. Then I installed it via terminal (12.10 version), and the result was the same. Then I downloaded it via ATI's web site (12.11 beta) and installed the .run file using the terminal, but the result was yet again the same. Then I went to the terminal and entered these commands: sudo apt-get remove --purge fglrx fglrx_* fglrx-amdcccle* fglrx-dev* - It said it had nothing to uninstall sudo rm /ect/x11/xorg.conf - No such directory sudo dpkg-reconfigure xserver-xorg sudo startx sudo cp/ect/x11/xorg.conf.orig /ect/x11/xorg.conf - Also, no such directory sudo aticonfig --initial sudo reboot Then, I was presented with the log in screen, but when I tried to login (with my account), it flashed a black screen and then threw me back. Guest account still works (without unity and compiz, tough) and I can still use TTY. And I also got the "AMD Testing Only" watermark. Then I figured that I should stop messing with the terminal and get help before I unleashed Apocalypse XD. Side notes: My Ubuntu is installed on a ext4 partition with 60GB, and I dual boot with Windows 7 (at least for now). My internet is a 50kbps 3G-ish, so downloading even small files is a pain, let alone a video driver. I would rather not reinstall the O.S., it was a herculean task to download everything I had in there, and I have very little free disk space for backups. I'm still new to Ubuntu (I know some basic commands), and I don't know how to debug, so please, be patient XD And using Windows, my internet is even slower (is that possible?), so it kind of leaves a torture aftertaste xD. So, if you guys could answer quickly, it would be greatly appreciated. Thanks in advance. If you need any info, just ask (and explain how to get it XD).

  Read the article

• How to Boot or "enter" into ubnutu 11.04 (Natty Narwhall) on PS3 after installing it?

  - by Xdm

  After failing to install ubuntu 11.04 Desktop version (burned on a dvd, because iso's file size was 726 Mb), in tried the alternate version (about 686 Mb) which i burned into a CD. During the installation process, i manually partitioned the hard drive using ext3. After the installation, the CD ejects itself and i hit "continue". In the k boot prompt i hit "enter" on my the keyboard. I see i welcome message in a dark background (a kind of full screen terminal/console called CLI i think) and was asked to enter my user name and password. After that, instead of booting into the beautiful desktop of Ubuntu, i saw this: ubuntu@my_name$ It was like a line of command i think, where you can use "sudo" commands. It is called a non-graphic mode i think. My my REAL problem is to enter Ubuntu 11.04 with the chocolate-colored background and the African music drum. I tried many commands to boot into the graphic mode of the system such as Ctr+Alt+F7 but nothing happened. In this case, i just saw numbers showing available blocks. I DON'T UNDERSTAND. I also tried startx and sudo startx without result. I DO bought a PS3 BOTH for gaming and for Ubuntu because i can't afford buying a PC. Please help me with my trouble dear Ubuntu 11.04 users. I am counting on you. All the best Xdm

  Read the article

• Very slow wireless connection (unrelated to power management) using Netgear N150 WNA1100 in 12.04

  - by vgaldikas

  I am using a Netgear N150 WNA1100 USB Adapter. The network driver is: ath9k_htc. When I use Ubuntu 12.04 my wireless connection is much slower than when I use the WNA1100 with my Windows 7 installation on the same machine. I have been researching this and the most common reason for this seems to be related to power management. However for me this is off by default. I had entered a bunch of different commands and, at one stage, I got it to work at full power. But then I rebooted the machine and it went back to slow again. After entering the different commands I was afraid that I may have messed something up, so I performed a fresh install of Ubuntu. I still have the same problem. My wireless connection is still much slower when using Ubuntu than when using Windows 7. I am not sure what other info could help... EDIT: Ok, I have made live usb from the iso file I used to install Ubuntu on this pc, and ran it on my laptop. Still the same problem. However la[top works grand on cable. I suppose this means that my wireless adapter or network driver can be eliminated as root of the problem.. So maybe to do with router itself? I use ZyXEL P-660HW-D1

  Read the article

• SQLAuthority News – A Successful Community TechDays at Ahmedabad – December 11, 2010

  - by pinaldave

  We recently had one of the best community events in Ahmedabad. We were fortunate that we had SQL Experts from around the world to have presented at this event. This gathering was very special because besides Jacob Sebastian and myself, we had two other speakers traveling all the way from Florida (Rushabh Mehta) and Bangalore (Vinod Kumar).There were a total of nearly 170 attendees and the event was blast. Here are the details of the event. Pinal Dave Presenting at Community Tech Days On the day of the event, it seemed to be the coldest day in Ahmedabad but I was glad to see hundreds of people waiting for the doors to be opened some hours before. We started the day with hot coffee and cookies. Yes, food first; and it was right after my keynote. I could clearly see that the coffee did some magic right away; the hall was almost full after the coffee break. Jacob Sebastian Presenting at Community Tech Days Jacob Sebastian, an SQL Server MVP and a close friend of mine, had an unusual job of surprising everybody with an innovative topic accompanied with lots of question-and-answer portions. That’s definitely one thing to love Jacob, that is, the novelty of the subject. His presentation was entitled “Best Database Practices for the .Net”; it really created magic on the crowd. Pinal Dave Presenting at Community Tech Days Next to Jacob Sebastian, I presented “Best Database Practices for the SharePoint”. It was really fun to present Database with the perspective of the database itself. The main highlight of my presentation was when I talked about how one can speed up the database performance by 40% for SharePoint in just 40 seconds. It was fun because the most important thing was to convince people to use the recommendation as soon as they walk out of the session. It was really amusing and the response of the participants was remarkable. Pinal Dave Presenting at Community Tech Days My session was followed by the most-awaited session of the day: that of Rushabh Mehta. He is an international BI expert who traveled all the way from Florida to present “Self Service BI” session. This session was funny and truly interesting. In fact, no one knew BI could be this much entertaining and fascinating. Rushabh has an appealing style of presenting the session; he instantly got very much interaction from the audience. Rushabh Mehta Presenting at Community Tech Days We had a networking lunch break in-between, when we talked about many various topics. It is always interesting to get in touch with the Community and feel a part of it. I had a wonderful time during the break. Vinod Kumar Presenting at Community Tech Days After lunch was apparently the most difficult session for the presenter as during this time, many people started to fall sleep and get dizzy. This spot was requested by Microsoft SQL Server Evangelist Vinod Kumar himself. During our discussion he suggested that if he gets this slot he would make sure people are up and more interactive than during the morning session. Just like always, this session was one of the best sessions ever. Vinod is true to his word as he presented the subject of “Time Management for Developer”. This session was the biggest hit in the event because the subject was instilled in the mind of every participant. Vinod Kumar Presenting at Community Tech Days Vinod’s session was followed by his own small session. Due to “insistent public demand”, he presented an interesting subject, “Tricks and Tips of SQL Server“. In 20 minutes he has done another awesome job and all attendees wanted more of the tricks. Just as usual he promised to do that next time for us. Vinod’s session was succeeded by Prabhjot Singh Bakshi’s session. He presented an appealing Silverlight concept. Just the same, he did a great job and people cheered him. Prabhjot Presenting at Community Tech Days We had a special invited speaker, Dhananjay Kumar, traveling all the way from Pune. He always supports our cause to help the Community in empowering participants. He presented the topic about Win7 Mobile and SharePoint integration. This was something many did not even expect to be possible. Kudos to Dhananjay for doing a great job. Dhananjay Kumar Presenting at Community Tech Days All in all, this event was one of the best in the Community Tech Days series in Ahmedabad. We were fortunate that legends from the all over the world were present here to present to the Community. I’d say never underestimate the power of the Community and its influence over the direction of the technology. Vinod Kumar Presenting trophy to Pinal Dave Vinod Kumar Presenting trophy to Pinal Dave This event was a very special gathering to me personally because of your support to the vibrant Community. The following awards were won for last year’s performance: Ahmedabad SQL Server User Group (President: Jacob Sebastian; Leader: Pinal Dave) – Best Tier 2 User Group Best Development Community Individual Contributor – Pinal Dave Speakers I was very glad to receive the award for our entire Community. Attendees at Community Tech Days I want to say thanks to Rushabh Mehta, Vinod Kumar and Dhananjay Kumar for visiting the city and presenting various technology topics in Community Tech Days. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: MVP, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, SQLAuthority News, T SQL, Technology

  Read the article

• EBS Techstack Sessions at OAUG/Collaborate 2010

  - by Steven Chan

  We have a large contingent of E-Business Suite Applications Technology Group staff rolling out to the OAUG/Collaborate 2010 conference in Las Vegas new week.  Our Applications Technology Group staff will be appearing as guest speakers or full-speakers at the following E-Business Suite technology stack related sessions:Database Special Interest GroupSunday, April 18, 11:00 AM, Breakers FSIG Leaders:  Michael Brown, Colibri; Sandra Vucinic, Vlad GroupGuest Speaker:  Steven ChanCovering database upcoming and past desupport dates, and database support policies as they apply to E-Business Suite environments, general Q&A E-Business Suite Technology Stack Special Interest GroupSunday, April 18, 3:00 PM, Breakers FSIG Leaders:  Elke Phelps, Paul Jackson, HumanaGuest Speaker:  Steven ChanCovering the latest EBS technology stack certifications, roadmap, desupport noticesupgrade options for Discoverer, OID, SSO, Portal, general Q&A E-Business Suite Applications Technology Roadmap & VisionMonday, April 19, 8:00 AM, South Seas GOracle Speaker:  Uma PrabhalaLatest developments for SOA, AOL, OAF, Web ADI, SES, AMP, ACMP, security, and other technologies Oracle E-Business Suite Applications Strategy and General Manager UpdateMonday, April 19, 2:30 PM, Mandalay Bay Ballroom DOracle Speaker:  Cliff GodwinUpdate on the entire Oracle E-Business Suite product line. The session covers the value delivered by the current release of Oracle E-Business Suite applications, the momentum, and how Oracle E-Business Suite applications integrate into Oracle's overall applications strategy 10 Things You Can Do Today to Prepare for the Next Generation ApplicationsTuesday, April 20, 8:00 AM, South Seas FOracle Speaker:  Nadia Bendjedou"Common sense" and "practical" steps that can be taken today to increase the value of your Oracle Applications (E-Business Suite, PeopleSoft, Siebel, and JDE) investments by using the latest Oracle solutions and technologiesReducing TCO using Oracle E-Business Suite Management PacksTuesday, April 20, 10:30 AM, South Seas EOracle Speaker:  Angelo RosadoLearn how you can reduce the Total Cost of Ownership by implementing Application Management Pack (AMP) and Application Change Management Pack (ACP) for E-Business Suite 11i, R12, R12.1. AMP is Oracle's next generation system manageability product offering that provides a centralized platform to manage and maintain EBS. ACP is Oracle's offering to monitor and manage E-Business Suite changes in the areas of E-Business Suite Customizations, Patches and Functional Setups. E-Business Suite Upgrade Special Interest GroupTuesday, April 20, 3:15 PM, South Seas ESIG Leaders:  John Stouffer; Sandra Vucinic, Vlad GroupGuest Speaker:  Steven ChanParticipating in general Q&A E-Business Suite Technology Essentials: Using the Latest Oracle Technologies with E-Business Suite Wednesday, April 21, 8:00 AM, South Seas HOracle Speaker:  Lisa ParekhOracle continues to build new functionality into the Oracle Database, Fusion Middleware, and Enterprise Manager. Come see how you can enhance the value of E-Business Suite for your users and lower your costs of ownership by utilizing the latest features of these Oracle technologies with E-Business Suite. Learn about the latest advanced E-Business Suite topologies and features, including new options for security, performance, third-party integration, SOA, virtualization, clouds, systems management, and much more How to Leverage the New E-Business Suite R12.1 Solutions Without Upgrading your 11.5.10 EnvironmentWednesday, April 21, 10:30 AMOracle Speaker:  Nadia Bendjedou, South Seas ELearn how you can use the latest E-Business Suite 12.1 standalone solutions without upgrading from your E-Business Suite 11.5.10 environment Web 2.0 User Experience and Oracle Fusion Middleware Integration with Oracle E-Business SuiteWednesday, April 21, 4:00 PM, South Seas FOracle Speaker:  Padmaprabodh AmbaleSee the next generation Oracle E-Business Suite OA framework improvements that will provide new rich interactions in components such as LOV, Tables and Attachments.  See  new components like the Rich Container that allows any Web 2.0 content like Flash or OBIEE to be embedded in OA Framework pages. Advanced Technology Deployment Architectures for E-Business Suite Wednesday, April 21, 2:15 PM, South Seas EOracle Speaker:  Steven ChanLearn how to take advantage of the latest version of Oracle Fusion Middleware with Oracle E-Business Suite. Learn how to utilize identity management systems and LDAP directories. In addition, come to this session for answers about advanced network deployments involving reverse proxy servers, load balancers, and DMZ's, and to see how you can take benefit from virtualization and new system management capabilities. Upgrading to Oracle E-Business Suite 12.1 - Best PracticesThursday, April 22, 11:00 AM, South Seas EOracle Speaker:  Lester Gutierrez, Udayan ParvateFundamental of upgrading to Release 12.1, which includes the technology stack components and differences, the upgrade path from various releases of Oracle E-Business Suite, upgrade steps, monitoring the upgrade, hints and tips for minimizing downtime and upgrade best practices for making the upgrade to Release 12.1 a success.  We look forward to seeing you there!

  Read the article

• Look Inside WebLogic Server Embedded LDAP with an LDAP Explorer

  - by james.bayer

  Today a question came up on our internal WebLogic Server mailing lists about an issue deleting a Group from WebLogic Server.  The group had a special character in the name. The WLS console refused to delete the group with the message a java.net.MalformedURLException and another message saying “Errors must be corrected before proceeding.” as shown below. The group aa:bb is the one with the issue.  Click to enlarge. WebLogic Server includes an embedded LDAP server that can be used for managing users and groups for “reasonably small environments (10,000 or fewer users)”.  For organizations scaling larger or using more high-end features, I recommend looking at one of Oracle’s very popular enterprise directory services products like Oracle Internet Directory or Oracle Directory Server Enterprise Edition.  You can configure multiple authenicators in WebLogic Server so that you can use multiple directories at the same time. I am not sure WebLogic Server supports special characters in group names for the Embedded LDAP server, but in this case both the console and WLST reported the same issue deleting the group with the special character in the name.  Here’s the WLST output: wls:/hotspot_domain/serverConfig/SecurityConfiguration/hotspot_domain/Realms/myrealm/AuthenticationProviders/DefaultAuthenticator> cmo.removeGroup('aa:bb') Traceback (innermost last): File "<console>", line 1, in ? weblogic.security.providers.authentication.LDAPAtnDelegateException: [Security:090296]invalid URL ldap:///ou=people,ou=myrealm,dc=hotspot_domain??sub?(&(objectclass=person)(wlsMemberOf=cn=aa:bb,ou=groups,ou=myrealm,dc=hotspot_domain)) at weblogic.security.providers.authentication.LDAPAtnGroupMembersNameList.advance(LDAPAtnGroupMembersNameList.java:254) at weblogic.security.providers.authentication.LDAPAtnGroupMembersNameList.<init>(LDAPAtnGroupMembersNameList.java:119) at weblogic.security.providers.authentication.LDAPAtnDelegate.listGroupMembers(LDAPAtnDelegate.java:1392) at weblogic.security.providers.authentication.LDAPAtnDelegate.removeGroup(LDAPAtnDelegate.java:1989) at weblogic.security.providers.authentication.DefaultAuthenticatorImpl.removeGroup(DefaultAuthenticatorImpl.java:242) at weblogic.security.providers.authentication.DefaultAuthenticatorMBeanImpl.removeGroup(DefaultAuthenticatorMBeanImpl.java:407) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at weblogic.management.jmx.modelmbean.WLSModelMBean.invoke(WLSModelMBean.java:437) at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:836) at com.sun.jmx.mbeanserver.JmxMBeanServer.invoke(JmxMBeanServer.java:761) at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$16.run(WLSMBeanServerInterceptorBase.java:449) at java.security.AccessController.doPrivileged(Native Method) at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.invoke(WLSMBeanServerInterceptorBase.java:447) at weblogic.management.mbeanservers.internal.JMXContextInterceptor.invoke(JMXContextInterceptor.java:263) at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$16.run(WLSMBeanServerInterceptorBase.java:449) at java.security.AccessController.doPrivileged(Native Method) at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.invoke(WLSMBeanServerInterceptorBase.java:447) at weblogic.management.mbeanservers.internal.SecurityInterceptor.invoke(SecurityInterceptor.java:444) at weblogic.management.jmx.mbeanserver.WLSMBeanServer.invoke(WLSMBeanServer.java:323) at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder$11$1.run(JMXConnectorSubjectForwarder.java:663) at java.security.AccessController.doPrivileged(Native Method) at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder$11.run(JMXConnectorSubjectForwarder.java:661) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363) at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder.invoke(JMXConnectorSubjectForwarder.java:654) at javax.management.remote.rmi.RMIConnectionImpl.doOperation(RMIConnectionImpl.java:1427) at javax.management.remote.rmi.RMIConnectionImpl.access$200(RMIConnectionImpl.java:72) at javax.management.remote.rmi.RMIConnectionImpl$PrivilegedOperation.run(RMIConnectionImpl.java:1265) at java.security.AccessController.doPrivileged(Native Method) at javax.management.remote.rmi.RMIConnectionImpl.doPrivilegedOperation(RMIConnectionImpl.java:1367) at javax.management.remote.rmi.RMIConnectionImpl.invoke(RMIConnectionImpl.java:788) at javax.management.remote.rmi.RMIConnectionImpl_WLSkel.invoke(Unknown Source) at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:667) at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:522) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146) at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:518) at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207) at weblogic.work.ExecuteThread.run(ExecuteThread.java:176) Caused by: java.net.MalformedURLException at netscape.ldap.LDAPUrl.readNextConstruct(LDAPUrl.java:651) at netscape.ldap.LDAPUrl.parseUrl(LDAPUrl.java:277) at netscape.ldap.LDAPUrl.<init>(LDAPUrl.java:114) at weblogic.security.providers.authentication.LDAPAtnGroupMembersNameList.advance(LDAPAtnGroupMembersNameList.java:224) ... 41 more It’s fairly clear that in order to work that the : character needs to be URL encoded to %3A or similar.  But all is not lost, there is another way.  You can configure an LDAP Explorer like JXplorer to WebLogic Server Embedded LDAP and browse/edit the entries. Follow the instructions here, being sure to change the authentication credentials to the Embedded LDAP server to some value you know, as by default they are some unknown value.  You’ll need to reboot the WebLogic Server Admin Server after making this change. Now configure JXplorer to connect as described in the documentation.  I’ve circled the important inputs.  In this example, my domain name is “hotspot_domain” which listens on the localhost listen address and port 7001.  The cn=Admin user name is a constant identifier for the Administrator of the embedded LDAP and that does not change, but you need to know what it is so you can enter it into the tool you use. Once you connect successfully, you can explore the entries and in this case delete the group that is no longer desired.

  Read the article

• How to configure a zone cluster on Solaris Cluster 4.0

  - by JuergenS

  This is a short overview on how to configure a zone cluster on Solaris Cluster 4.0. This is a little bit different as in Solaris Cluster 3.2/3.3 because Solaris Cluster 4.0 is only running on Solaris 11. The name of the zone cluster must be unique throughout the global Solaris Cluster and must be configured on a global Solaris Cluster. Please read all the requirements for zone cluster in Solaris Cluster Software Installation Guide for SC4.0. For Solaris Cluster 3.2/3.3 please refer to my previous blog Configuration steps to create a zone cluster in Solaris Cluster 3.2/3.3. A. Configure the zone cluster into the already running global clusterCheck if zone cluster can be created # cluster show-netprops to change number of zone clusters use # cluster set-netprops -p num_zoneclusters=12 Note: 12 zone clusters is the default, values can be customized! Create config file (zc1config) for zone cluster setup e.g: Configure zone cluster # clzc configure -f zc1config zc1 Note: If not using the config file the configuration can also be done manually # clzc configure zc1 Check zone configuration # clzc export zc1 Verify zone cluster # clzc verify zc1 Note: The following message is a notice and comes up on several clzc commands Waiting for zone verify commands to complete on all the nodes of the zone cluster "zc1"... Install the zone cluster # clzc install zc1 Note: Monitor the consoles of the global zone to see how the install proceed! (The output is different on the nodes) It's very important that all global cluster nodes have installed the same set of ha-cluster packages! Boot the zone cluster # clzc boot zc1 Login into non-global-zones of zone cluster zc1 on all nodes and finish Solaris installation. # zlogin -C zc1 Check status of zone cluster # clzc status zc1 Login into non-global-zones of zone cluster zc1 and configure the shell environment for root (for PATH: /usr/cluster/bin, for MANPATH: /usr/cluster/man) # zlogin -C zc1 If using additional name service configure /etc/nsswitch.conf of zone cluster non-global zones. hosts: cluster files netmasks: cluster files Configure /etc/inet/hosts of the zone cluster zones Enter all the logical hosts of non-global zones B. Add resource groups and resources to zone cluster Create a resource group in zone cluster # clrg create -n <zone-hostname-node1>,<zone-hostname-node2> app-rg Note1: Use command # cluster status for zone cluster resource group overview. Note2: You can also run all commands for zone cluster in global cluster by adding the option -Z to the command. e.g: # clrg create -Z zc1 -n <zone-hostname-node1>,<zone-hostname-node2> app-rg Set up the logical host resource for zone cluster In the global zone do: # clzc configure zc1 clzc:zc1 add net clzc:zc1:net set address=<zone-logicalhost-ip> clzc:zc1:net end clzc:zc1 commit clzc:zc1 exit Note: Check that logical host is in /etc/hosts file In zone cluster do: # clrslh create -g app-rg -h <zone-logicalhost> <zone-logicalhost>-rs Set up storage resource for zone cluster Register HAStoragePlus # clrt register SUNW.HAStoragePlus Example1) ZFS storage pool In the global zone do: Configure zpool eg: # zpool create <zdata> mirror cXtXdX cXtXdX and # clzc configure zc1 clzc:zc1 add dataset clzc:zc1:dataset set name=zdata clzc:zc1:dataset end clzc:zc1 verify clzc:zc1 commit clzc:zc1 exit Check setup with # clzc show -v zc1 In the zone cluster do: # clrs create -g app-rg -t SUNW.HAStoragePlus -p zpools=zdata app-hasp-rs Example2) HA filesystem In the global zone do: Configure SVM diskset and SVM devices. and # clzc configure zc1 clzc:zc1 add fs clzc:zc1:fs set dir=/data clzc:zc1:fs set special=/dev/md/datads/dsk/d0 clzc:zc1:fs set raw=/dev/md/datads/rdsk/d0 clzc:zc1:fs set type=ufs clzc:zc1:fs add options [logging] clzc:zc1:fs end clzc:zc1 verify clzc:zc1 commit clzc:zc1 exit Check setup with # clzc show -v zc1 In the zone cluster do: # clrs create -g app-rg -t SUNW.HAStoragePlus -p FilesystemMountPoints=/data app-hasp-rs Example3) Global filesystem as loopback file system In the global zone configure global filesystem and it to /etc/vfstab on all global nodes e.g.: /dev/md/datads/dsk/d0 /dev/md/datads/dsk/d0 /global/fs ufs 2 yes global,logging and # clzc configure zc1 clzc:zc1 add fs clzc:zc1:fs set dir=/zone/fs (zc-lofs-mountpoint) clzc:zc1:fs set special=/global/fs (globalcluster-mountpoint) clzc:zc1:fs set type=lofs clzc:zc1:fs end clzc:zc1 verify clzc:zc1 commit clzc:zc1 exit Check setup with # clzc show -v zc1 In the zone cluster do: (Create scalable rg if not already done) # clrg create -p desired_primaries=2 -p maximum_primaries=2 app-scal-rg # clrs create -g app-scal-rg -t SUNW.HAStoragePlus -p FilesystemMountPoints=/zone/fs hasp-rs More details of adding storage available in the Installation Guide for zone cluster Switch resource group and resources online in the zone cluster # clrg online -eM app-rg # clrg online -eM app-scal-rg Test: Switch of the resource group in the zone cluster # clrg switch -n zonehost2 app-rg # clrg switch -n zonehost2 app-scal-rg Add supported dataservice to zone cluster Documentation for SC4.0 is available here Example output: Appendix: To delete a zone cluster do: # clrg delete -Z zc1 -F + Note: Zone cluster uninstall can only be done if all resource groups are removed in the zone cluster. The command 'clrg delete -F +' can be used in zone cluster to delete the resource groups recursively. # clzc halt zc1 # clzc uninstall zc1 Note: If clzc command is not successful to uninstall the zone, then run 'zoneadm -z zc1 uninstall -F' on the nodes where zc1 is configured # clzc delete zc1

  Read the article

• Algorithmia Source Code released on CodePlex

  - by FransBouma

  Following the release of our BCL Extensions Library on CodePlex, we have now released the source-code of Algorithmia on CodePlex! Algorithmia is an algorithm and data-structures library for .NET 3.5 or higher and is one of the pillars LLBLGen Pro v3's designer is built on. The library contains many data-structures and algorithms, and the source-code is well documented and commented, often with links to official descriptions and papers of the algorithms and data-structures implemented. The source-code is shared using Mercurial on CodePlex and is licensed under the friendly BSD2 license. User documentation is not available at the moment but will be added soon. One of the main design goals of Algorithmia was to create a library which contains implementations of well-known algorithms which weren't already implemented in .NET itself. This way, more developers out there can enjoy the results of many years of what the field of Computer Science research has delivered. Some algorithms and datastructures are known in .NET but are re-implemented because the implementation in .NET isn't efficient for many situations or lacks features. An example is the linked list in .NET: it doesn't have an O(1) concat operation, as every node refers to the containing LinkedList object it's stored in. This is bad for algorithms which rely on O(1) concat operations, like the Fibonacci heap implementation in Algorithmia. Algorithmia therefore contains a linked list with an O(1) concat feature. The following functionality is available in Algorithmia: Command, Command management. This system is usable to build a fully undo/redo aware system by building your object graph using command-aware classes. The Command pattern is implemented using a system which allows transparent undo-redo and command grouping so you can use it to make a class undo/redo aware and set properties, use its contents without using commands at all. The Commands namespace is the namespace to start. Classes you'd want to look at are CommandifiedMember, CommandifiedList and KeyedCommandifiedList. See the CommandQueueTests in the test project for examples. Graphs, Graph algorithms. Algorithmia contains a sophisticated graph class hierarchy and algorithms implemented onto them: non-directed and directed graphs, as well as a subgraph view class, which can be used to create a view onto an existing graph class which can be self-maintaining. Algorithms include transitive closure, topological sorting and others. A feature rich depth-first search (DFS) crawler is available so DFS based algorithms can be implemented quickly. All graph classes are undo/redo aware, as they can be set to be 'commandified'. When a graph is 'commandified' it will do its housekeeping through commands, which makes it fully undo-redo aware, so you can remove, add and manipulate the graph and undo/redo the activity automatically without any extra code. If you define the properties of the class you set as the vertex type using CommandifiedMember, you can manipulate the properties of vertices and the graph contents with full undo/redo functionality without any extra code. Heaps. Heaps are data-structures which have the largest or smallest item stored in them always as the 'root'. Extracting the root from the heap makes the heap determine the next in line to be the 'maximum' or 'minimum' (max-heap vs. min-heap, all heaps in Algorithmia can do both). Algorithmia contains various heaps, among them an implementation of the Fibonacci heap, one of the most efficient heap datastructures known today, especially when you want to merge different instances into one. Priority queues. Priority queues are specializations of heaps. Algorithmia contains a couple of them. Sorting. What's an algorithm library without sort algorithms? Algorithmia implements a couple of sort algorithms which sort the data in-place. This aspect is important in situations where you want to sort the elements in a buffer/list/ICollection in-place, so all data stays in the data-structure it already is stored in. PropertyBag. It re-implements Tony Allowatt's original idea in .NET 3.5 specific syntax, which is to have a generic property bag and to be able to build an object in code at runtime which can be bound to a property grid for editing. This is handy for when you have data / settings stored in XML or other format, and want to create an editable form of it without creating many editors. IEditableObject/IDataErrorInfo implementations. It contains default implementations for IEditableObject and IDataErrorInfo (EditableObjectDataContainer for IEditableObject and ErrorContainer for IDataErrorInfo), which make it very easy to implement these interfaces (just a few lines of code) without having to worry about bookkeeping during databinding. They work seamlessly with CommandifiedMember as well, so your undo/redo aware code can use them out of the box. EventThrottler. It contains an event throttler, which can be used to filter out duplicate events in an event stream coming into an observer from an event. This can greatly enhance performance in your UI without needing to do anything other than hooking it up so it's placed between the event source and your real handler. If your UI is flooded with events from data-structures observed by your UI or a middle tier, you can use this class to filter out duplicates to avoid redundant updates to UI elements or to avoid having observers choke on many redundant events. Small, handy stuff. A MultiValueDictionary, which can store multiple unique values per key, instead of one with the default Dictionary, and is also merge-aware so you can merge two into one. A Pair class, to quickly group two elements together. Multiple interfaces for helping with building a de-coupled, observer based system, and some utility extension methods for the defined data-structures. We regularly update the library with new code. If you have ideas for new algorithms or want to share your contribution, feel free to discuss it on the project's Discussions page or send us a pull request. Enjoy!

  Read the article

• FAT Volume and CE

  - by Kate Moss' Open Space

  Whenever we format a disk volume, it is a good idea to name the label so it will be easier to categorize. To label a volume, we can use LABEL command or UI depends on your preference. Windows CE does provide FAT driver and support various format (FAT12, FAT16,FAT32, ExFAT and TFAT - transaction-safe FAT) and many feature to let you scan and even defrag the volume but not labeling. At any time you format a volume in CE and then mount it on PC, the label is always empty! Of course, you can always label the volume on PC, even it is formatted in CE. So looks like CE does not care about the volume label at all, neither report the label to OS nor changing the label on FAT.So how can we set the volume label in CE? To Answer this question, we need to know how does FAT stores the volume label. Here are some on-line resources are handy for parsing FAT. http://en.wikipedia.org/wiki/File_Allocation_Table http://www.pjrc.com/tech/8051/ide/fat32.html http://www.microsoft.com/whdc/system/platform/firmware/fatgen.mspx You can refer to PUBLIC\COMMON\OAK\DRIVERS\FSD\FATUTIL\MAIN\bootsec.h and dosbpb.h or the above links for the fields we discuss here. The first sector of a FAT Volume (it is not necessary to be the first sector of a disk.) is a FAT boot sector and BPB (BIOS Parameter Block). And at offset 43, bgbsVolumeLabel (or bsVolumeLabel on FAT16) is for storing the volume lable, but note in the spec also indicates "FAT file system drivers should make sure that they update this field when the volume label file in the root directory has its name changed or created.". So we can't just simply update the bgbsVolumeLabel but also need to create a volume lable file in root directory. The volume lable file is not a real file but just a file entry in root directory with zero file lenth and a very special file attribute, ATTR_VOLUME_ID. (defined in public\common\oak\drivers\fsd\fatutil\MAIN\fatutilp.h) Locating and accessing bootsector is quite straight forward, as long as we know the starting sector of a FAT volume, that's it. But where is the root directory? The layout of a typical FAT is like this Boot sector (Volume ID in the figure) followed by Reserved Sectors (1 on FAT12/16 and 32 on FAT32), then FAT chain table(s) (can be 1 or 2), after that is the root directory (FAT12/16 and not shows in the figure) then begining of the File and Directories. In FAT12/16, the root directory is placed right after FAT so it is not hard to caculate the offset in the volume. But in FAT32, this rule is no longer true: the first cluster of the root directory is determined by BGBPB_RootDirStrtClus (or offset 44 in boot sector). Although this field is usually 0x00000002 (it is how CE initial the root directory after formating a volume. Note we should never assume it is always true) which means the first cluster contains data but not like the root directory is contiguous in FAT12/16, it is just like a regular file can be fragmented. So we need to access the root directory (of FAT32) hopping one cluster to another by traversing FAT table. Let's trace the code now. Although the source of FAT driver is not available in CE Shared Source program, but the formatter, Fatutil.dll, is available in public\common\oak\drivers\fsd\fatutil\MAIN\formatdisk.cpp. Be aware the public code only provides formatter for FAT12/16/32 for ExFAT it is still not available. FormatVolumeInternal is the main worker function. With the knowledge here, you should be able the trace the code easily. But I would like to discuss the following code pieces     dwReservedSectors = (fo.dwFatVersion == 32) ? 32 : 1;     dwRootEntries = (fo.dwFatVersion == 32) ? 0 : fo.dwRootEntries; Note the dwReservedSectors is 32 in FAT32 and 1 in FAT12/16. Root Entries is another different mentioned in previous paragraph, 0 for FAT32 (dynamic allocated) and fixed size (usually 512, defined in DEFAULT_ROOT_ENTRIES in public\common\sdk\inc\fatutil.h) And then here   memset(pBootSec->bsVolumeLabel, 0x20, sizeof(pBootSec->bsVolumeLabel)); It sets the Volume Label as empty string. Now let's carry on to the next section - write the root directory.     if (fo.dwFatVersion == 32) {         if (!(fo.dwFlags & FATUTIL_FORMAT_TFAT)) {             dwRootSectors = dwSectorsPerCluster;         }         else {             DIRENTRY    dirEntry;             DWORD       offset;             int               iVolumeNo;             memset(pbBlock, 0, pdi->di_bytes_per_sect);             memset(&dirEntry, 0, sizeof(DIRENTRY));                         dirEntry.de_attr = ATTR_VOLUME_ID;             // the first one is volume label             memcpy(dirEntry.de_name, "TFAT       ", sizeof (dirEntry.de_name));             memcpy(pbBlock, &dirEntry, sizeof(dirEntry));              ...             // Skip the next step of zeroing out clusters             dwCurrentSec += dwSectorsPerCluster;             dwRootSectors = 0;         }     }     // Each new root directory sector needs to be zeroed.     memset(pbBlock, 0, cbSizeBlk);     iRootSec=0;     while ( iRootSec < dwRootSectors) { Basically, the code zero out the each entry in root directory depends on dwRootSectors. In FAT12/16, the dwRootSectors is calculated as the sectors we need for the root entries (512 for most of the case) and in FAT32 it just zero out the one cluster. Please note that, if it is a TFAT volume, it initialize the root directory with special volume label entries for some special purpose. Despite to its unusual initialization process for TFAT, it does provide a example for how to create a volume entry. With some minor modification, we can assign the volume label in FAT formatter and also remember to sync the volume label with bsVolumeLabel or bgbsVolumeLabel in boot sector.

  Read the article

• Killing Stuck Child JVM's

  - by ACShorten

  Note: This facility only applies to Oracle Utilities Application Framework products using COBOL. In some situations, the Child JVM's may spin. This causes multiple startup/shutdown Child JVM messages to be displayed and recursive child JVM's to be initiated and shunned. If the following: Unable to establish connection on port …. after waiting .. seconds.The issue can be caused intermittently by CPU spins in connection to the creation of new processes, specifically Child JVMs. Recursive (or double) invocation of the System.exit call in the remote JVM may be caused by a Process.destroy call that the parent JVM always issues when shunning a JVM. The issue may happen when the thread in the parent JVM that is responsible for the recycling gets stuck and it affects all child JVMs. If this issue occurs at your site then there are a number of options to address the issue: Configure an Operating System level kill command to force the Child JVM to be shunned when it becomes stuck. Configure a Process.destroy command to be used if the kill command is not configured or desired. Specify a time tolerance to detect stuck threads before issuing the Process.destroy or kill commands. Note: This facility is also used when the Parent JVM is also shutdown to ensure no zombie Child JVM's exit. The following additional settings must be added to the spl.properties for the Business Application Server to use this facility: spl.runtime.cobol.remote.kill.command – Specify the command to kill the Child JVM process. This can be a command or specify a script to execute to provide additional information. The kill.command property can accept two arguments, {pid} and {jvmNumber}, in the specified string. The arguments must be enclosed in curly braces as shown here. Note: The PID will be appended to the killcmd string, unless the {pid} and {jvmNumber} arguments are specified. The jvmNumber can be useful if passed to a script for logging purposes. Note: If a script is used it must be in the path and be executable by the OS user running the system. spl.runtime.cobol.remote.destroy.enabled – Specify whether to use the Process.destroy command instead of the kill command. Specify true or false. Default value is false. Note: Unless otherwise required, it is recommended to use the kill command option if shunning JVM's is an issue. There this value can remain its default value, false, unless otherwise required. spl.runtime.cobol.remote.kill.delaysecs – Specify the number of seconds to wait for the Child JVM to terminate naturally before issuing the Process.destroy or kill commands. Default is 10 seconds. For example: spl.runtime.cobol.remote.kill.command=kill -9 {pid} {jvmNumber}spl.runtime.cobol.remote.destroy.enabled=falsespl.runtime.cobol.remote.kill.delaysecs=10 When a Child JVM is to be recycled, these properties are inspected and the spl.runtime.cobol.remote.kill.command, executed if provided. This is done after waiting for spl.runtime.cobol.remote.kill.delaysecs seconds to give the JVM time to shut itself down. The spl.runtime.cobol.remote.destroy.enabled property must be set to true AND the spl.runtime.cobol.remote.kill.command omitted for the original Process.destroy command to be used on the process. Note: By default the spl.runtime.cobol.remote.destroy enabled is set to false and is therefore disabled. If neither spl.runtime.cobol.remote.kill.command nor spl.runtime.cobol.remote.destroy.enabled is specified, child JVMs will not beforcibly killed. They will be left to shut themselves down (which may lead to orphan JVMs). If both are specified, the spl.runtime.cobol.remote.kill.command is preferred and spl.runtime.cobol.remote.destroy.enabled defaulted to false.It is recommended to invoke a script to issue the direct kill command instead of directly using the kill -9 commands.For example, the following sample script ensures that the process Id is an active cobjrun process before issuing the kill command: forcequit.sh #!/bin/shTHETIME=`date +"%Y-%m-%d %H:%M:%S"`if [ "$1" = "" ]then  echo "$THETIME: Process Id is required" >>$SPLSYSTEMLOGS/forcequit.log  exit 1fijavaexec=cobjrunps e $1 | grep -c $javaexecif [ $? = 0 ]then  echo "$THETIME: Process $1 is an active $javaexec process -- issuing kill-9 $1" >>$SPLSYSTEMLOGS/forcequit.log  kill -9 $1exit 0else  echo "$THETIME: Process id $1 is not a $javaexec process or not active --  kill will not be issued" >>$SPLSYSTEMLOGS/forcequit.logexit 1fi This script's name would then be specified as the value for the spl.runtime.cobol.remote.kill.command property, for example: spl.runtime.cobol.remote.kill.command=forcequit.sh The forcequit script does not have any explicit parameters but pid is passed automatically. To use the jvmNumber parameter it must explicitly specified in the command. For example, to call script forcequit.sh and pass it the pid and the child JVM number, specify it as follows: spl.runtime.cobol.remote.kill.command=forcequit.sh {pid} {jvmNumber} The script can then use the JVM number for logging purposes or to further ensure that the correct pid is being killed.If the arguments are omitted, the pid is automatically appended to the spl.runtime.cobol.remote.kill.command string. To use this facility the following patches must be installed: Patch 13719584 for Oracle Utilities Application Framework V2.1, Patches 13684595 and 13634933 for Oracle Utilities Application Framework V2.2 Group Fix 4 (as Patch 13640668) for Oracle Utilities Application Framework V4.1.

  Read the article

• Bring Office 2003 Menus Back to 2010 with UBitMenu

  - by Matthew Guay

  Are you having trouble getting used to the Ribbon interface in Office 2010?  Here’s how you can roll back the clock a bit and bring back the familiar menus and toolbars from 2003. The Office 2007 Ribbon was both praised and criticized.  While many users felt they were more productive with the new interface, others felt frustrated searching for commands they had memorized in older versions of Office.  Now, with Office 2010, the ribbon interface has been brought to every app in the Office suite, and is integrated into many newer programs from Microsoft. If you’re moving from Office 2003, using UBitMenu allows you to add the old familiar menus back along with the new Ribbon interface for an easier learning curve. Also, with the customizability of Office 2010, we can strip away the extra Ribbon tabs to make it more like 2003. Get the 2003 Menus and Toolbars Back in Office 2010 Download UBitMenu (link below), and install as normal.  Make sure all of your Office programs are closed during the installation.  This handy utility is very small, and installed amazingly quick. Open Word, Excel, or PowerPoint and there’s now a new Menu tab beside Home in the Ribbon.  Now you can access all of your favorite old Office commands in the familiar menus, and access many of the newer Office features such as SmartArt.   Here’s a close-up of the toolbar.  Notice that the layout is very similar to that of Word 2003. You can access all of the new Transitions in PowerPoint 2010 from the menu bar.   The menu in Excel even included support for the new PivotTable and PivotCharts Wizard. One problem we noticed was that the toolbars were condensed to a drop-down menu if the Office window was less than 870px wide.  This may be a frustration to users with low-resolution displays, and you might want to use the Office Apps maximized. Get Rid of the Ribbon Now that you’ve got the old menus back, you can get rid of the extra ribbon tabs if you’d like.  Office 2010 lets you customize your ribbon and remove tabs, so let’s get rid of all the other tabs except for our new Menu tab.  In our example we’re using Word, but you can do it in Excel or PowerPoint the same way. Click the File tab and select Options. Alternately, in the Menu tab, select Tools and then Word Options. Select Customize Ribbon on the left sidebar, then uncheck the boxes beside all the ribbon tabs you want to hide on the right.  Click Ok when you’re finished. While you’re at it, you can change the default color scheme as well. Note: The color change will automatically change the color scheme in all of the Office apps, so you’ll only need to do that once. Now the ribbon only has 2 tabs…the File tab for the new Backstage View, and the UBitMenu tab we just installed.  It almost has the appearance Word 2003, but with the new features of Word 2010!  You’ll need to repeat these steps in Excel and PowerPoint if you want to customize their ribbon the same.   Conclusion If you’ve been having a hard time getting used to Office 2010, UBitMenu is a great way to get familiar with the new interface, or simply stay productive with your old tricks.  We do wish it supported the other Office applications like OneNote and Outlook. That doesn’t make it a deal breaker though, it can make the learning curve easier in Word, PowerPoint, and Excel. UBitMenu is free for personal use, and available at a very reasonable price for businesses. If you’re using Office 2007 and not a fan of the Ribbon, UBitMenu works for it as well. Download UBitMenu Similar Articles Productive Geek Tips How To Bring Back the Old Menus in Office 2007Upgrade Office 2003 to 2010 on XP or Run them Side by SideHow to Find Office 2003 Commands in Office 2010Make Word 2007 Always Save in Word 2003 FormatMake Excel 2007 Always Save in Excel 2003 Format TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Speed Up Windows With ReadyBoost Awesome World Cup Soccer Calendar Nice Websites To Watch TV Shows Online 24 Million Sites Windows Media Player Glass Icons (icons we like) How to Forecast Weather, without Gadgets

  Read the article

• A Gentle Introduction to NuGet

  - by Joe Mayo

  Not too long ago, Microsoft released, NuGet, an automated package manager for Visual Studio.  NuGet makes it easy to download and install assemblies, and their references, into a Visual Studio project.  These assemblies, which I loosely refer to as packages, are often open source, and include projects such as LINQ to Twitter. In this post, I'll explain how to get started in using NuGet with your projects to include: installng NuGet, installing/uninstalling LINQ to Twitter via console command, and installing/uninstalling LINQ to Twitter via graphical reference menu. Installing NuGet The first step you'll need to take is to install NuGet.  Visit the NuGet site, at http://nuget.org/, click on the Install NuGet button, and download the NuGet.Tools.vsix installation file, shown below. Each browser is different (i.e. FireFox, Chrome, IE, etc), so you might see options to run right away, save to a location, or access to the file through the browser's download manager.  Regardless of how you receive the NuGet installer, execute the downloaded NuGet.Tools.vsix to install Nuget into visual Studio. The NuGet Footprint When you open visual Studio, observe that there is a new menu option on the Tools menu, titled Library Package Manager; This is where you use NuGet.  There are two menu options, from the Library Package Manager Menu that you can use: Package Manager Console and Package Manager Settings.  I won't discuss Package Manager Settings in this post, except to give you a general idea that, as one of a set of capabilities, it manages the path to the NuGet server, which is already set for you. Another menu, added by the NuGet installer, is Add Library Package Reference, found by opening the context menu for either a Solution Explorer project or a project's References folder or via the Project menu.  I'll discuss how to use this later in the post. The following discussion is concerned with the other menu option, Package Manager Console, which allows you to manage NuGet packages. Gettng a NuGet Package Selecting Tools -> Library Package Manager -> Package Manager Console opens the Package Manager Console.  As you can see, below, the Package Manager Console is text-based and you'll need to type in commands to work with packages. In this post, I'll explain how to use the Package Manager Console to install LINQ to Twitter, but there are many more commands, explained in the NuGet Package Manager Console Commands documentation.  To install LINQ to Twitter, open your current project where you want LINQ to Twitter installed, and type the following at the PM> prompt: Install-Package linqtotwitter If all works well, you'll receive a confirmation message, similar to the following, after a brief pause: Successfully installed 'linqtotwitter 2.0.20'. Successfully added 'linqtotwitter 2.0.20' to NuGetInstall. Also, observe that a reference to the LinqToTwitter.dll assembly was added to your current project. Uninstalling a NuGet Package I won't be so bold as to assume that you would only want to use LINQ to Twitter because there are other Twitter libraries available; I recommend Twitterizer if you don't care for LINQ to Twitter.  So, you might want to use the following command at the PM> prompt to remove LINQ to Twitter from your project: Uninstall-Package linqtotwitter After a brief pause, you'll see a confirmation message similar to the following: Successfully removed 'linqtotwitter 2.0.20' from NuGetInstall. Also, observe that the LinqToTwitter.dll assembly no longer appears in your project references list. Sometimes using the Package Manager Console is required for more sophisticated scenarios.  However, LINQ to Twitter doesn't have any dependencies and is a very simple install, so you can use another method of installing graphically, which I'll show you next. Graphical Installations As explained earlier, clicking Add Library Package Reference, from the context menu for either a Solution Explorer project or a project's References folder or via the Project menu opens the Add Library Package Reference window. This window will allow you to add a reference a NuGet package in your project. To the left of the window are a few accordian folders to help you find packages that are either on-line or already installed.  Just like the previous section, I'll assume you are installing LINQ to Twitter for the first time, so you would select the Online folder and click All.  After waiting for package descriptions to download, you'll notice that there are too many to scroll through in a short period of time, over 900 as I write this.  Therefore, use the search box located at the top right corner of the window and type LINQ to Twitter as I've done in the previous figure. You'll see LINQ to Twitter appear in the list. Click the Install button on the LINQ to Twitter entry. If the installation was successful, you'll see a message box display and disappear quickly (or maybe not if your machine is very fast or you blink at that moment). Then you'll see a reference to the LinqToTwitter.dll assembly in your project's references list. Note: While running this demo, I ran into an issue where VS had created a file lock on an installation folder without releasing it, causing an error with "packagename already exists. Skipping..." and then an error describing that it couldn't write to a destination folder.  I resolved the problem by closing and reopening VS. If you open the Add a Library Package Reference window again, you'll see LINQ to Twitter listed in the Recent packages folder. Summary You can install NuGet via the on-line home page with a click of a button.  Nuget provides two ways to work with packages, via console or graphical window.  While the graphical window is easiest, the console window is more powerful. You can now quickly add project references to many available packages via the NuGet service. Joe

  Read the article

• Using Transaction Logging to Recover Post-Archived Essbase data

  - by Keith Rosenthal

  Data recovery is typically performed by restoring data from an archive.  Data added or removed since the last archive took place can also be recovered by enabling transaction logging in Essbase.  Transaction logging works by writing transactions to a log store.  The information in the log store can then be recovered by replaying the log store entries in sequence since the last archive took place.  The following information is recorded within a transaction log entry: Sequence ID Username Start Time End Time Request Type A request type can be one of the following categories: Calculations, including the default calculation as well as both server and client side calculations Data loads, including data imports as well as data loaded using a load rule Data clears as well as outline resets Locking and sending data from SmartView and the Spreadsheet Add-In.  Changes from Planning web forms are also tracked since a lock and send operation occurs during this process. You can use the Display Transactions command in the EAS console or the query database MAXL command to view the transaction log entries. Enabling Transaction Logging Transaction logging can be enabled at the Essbase server, application or database level by adding the TRANSACTIONLOGLOCATION essbase.cfg setting.  The following is the TRANSACTIONLOGLOCATION syntax: TRANSACTIONLOGLOCATION [appname [dbname]] LOGLOCATION NATIVE ENABLE | DISABLE Note that you can have multiple TRANSACTIONLOGLOCATION entries in the essbase.cfg file.  For example: TRANSACTIONLOGLOCATION Hyperion/trlog NATIVE ENABLE TRANSACTIONLOGLOCATION Sample Hyperion/trlog NATIVE DISABLE The first statement will enable transaction logging for all Essbase applications, and the second statement will disable transaction logging for the Sample application.  As a result, transaction logging will be enabled for all applications except the Sample application. A location on a physical disk other than the disk where ARBORPATH or the disk files reside is recommended to optimize overall Essbase performance. Configuring Transaction Log Replay Although transaction log entries are stored based on the LOGLOCATION parameter of the TRANSACTIONLOGLOCATION essbase.cfg setting, copies of data load and rules files are stored in the ARBORPATH/app/appname/dbname/Replay directory to optimize the performance of replaying logged transactions.  The default is to archive client data loads, but this configuration setting can be used to archive server data loads (including SQL server data loads) or both client and server data loads. To change the type of data to be archived, add the TRANSACTIONLOGDATALOADARCHIVE configuration setting to the essbase.cfg file.  Note that you can have multiple TRANSACTIONLOGDATALOADARCHIVE entries in the essbase.cfg file to adjust settings for individual applications and databases. Replaying the Transaction Log and Transaction Log Security Considerations To replay the transactions, use either the Replay Transactions command in the EAS console or the alter database MAXL command using the replay transactions grammar.  Transactions can be replayed either after a specified log time or using a range of transaction sequence IDs. The default when replaying transactions is to use the security settings of the user who originally performed the transaction.  However, if that user no longer exists or that user's username was changed, the replay operation will fail. Instead of using the default security setting, add the REPLAYSECURITYOPTION essbase.cfg setting to use the security settings of the administrator who performs the replay operation.  REPLAYSECURITYOPTION 2 will explicitly use the security settings of the administrator performing the replay operation.  REPLAYSECURITYOPTION 3 will use the administrator security settings if the original user’s security settings cannot be used. Removing Transaction Logs and Archived Replay Data Load and Rules Files Transaction logs and archived replay data load and rules files are not automatically removed and are only removed manually.  Since these files can consume a considerable amount of space, the files should be removed on a periodic basis. The transaction logs should be removed one database at a time instead of all databases simultaneously.  The data load and rules files associated with the replayed transactions should be removed in chronological order from earliest to latest.  In addition, do not remove any data load and rules files with a timestamp later than the timestamp of the most recent archive file. Partitioned Database Considerations For partitioned databases, partition commands such as synchronization commands cannot be replayed.  When recovering data, the partition changes must be replayed manually and logged transactions must be replayed in the correct chronological order. If the partitioned database includes any @XREF commands in the calc script, the logged transactions must be selectively replayed in the correct chronological order between the source and target databases. References For additional information, please see the Oracle EPM System Backup and Recovery Guide.  For EPM 11.1.2.2, the link is http://docs.oracle.com/cd/E17236_01/epm.1112/epm_backup_recovery_1112200.pdf

  Read the article

• Scripting custom drawing in Delphi application with IF/THEN/ELSE statements?

  - by Jerry Dodge

  I'm building a Delphi application which displays a blueprint of a building, including doors, windows, wiring, lighting, outlets, switches, etc. I have implemented a very lightweight script of my own to call drawing commands to the canvas, which is loaded from a database. For example, one command is ELP 1110,1110,1290,1290,3,8388608 which draws an ellipse, parameters are 1110x1110 to 1290x1290 with pen width of 3 and the color 8388608 converted from an integer to a TColor. What I'm now doing is implementing objects with common drawing routines, and I'd like to use my scripting engine, but this calls for IF/THEN/ELSE statements and such. For example, when I'm drawing a light, if the light is turned on, I'd like to draw it yellow, but if it's off, I'd like to draw it gray. My current scripting engine has no recognition of such statements. It just accepts simple drawing commands which correspond with TCanvas methods. Here's the procedure I've developed (incomplete) for executing a drawing command on a canvas: function DrawCommand(const Cmd: String; var Canvas: TCanvas): Boolean; type TSingleArray = array of Single; var Br: TBrush; Pn: TPen; X: Integer; P: Integer; L: String; Inst: String; T: String; Nums: TSingleArray; begin Result:= False; Br:= Canvas.Brush; Pn:= Canvas.Pen; if Assigned(Canvas) then begin if Length(Cmd) > 5 then begin L:= UpperCase(Cmd); if Pos(' ', L)> 0 then begin Inst:= Copy(L, 1, Pos(' ', L) - 1); Delete(L, 1, Pos(' ', L)); L:= L + ','; SetLength(Nums, 0); X:= 0; while Pos(',', L) > 0 do begin P:= Pos(',', L); T:= Copy(L, 1, P - 1); Delete(L, 1, P); SetLength(Nums, X + 1); Nums[X]:= StrToFloatDef(T, 0); Inc(X); end; Br.Style:= bsClear; Pn.Style:= psSolid; Pn.Color:= clBlack; if Inst = 'LIN' then begin Pn.Width:= Trunc(Nums[4]); if Length(Nums) > 5 then begin Br.Style:= bsSolid; Br.Color:= Trunc(Nums[5]); end; Canvas.MoveTo(Trunc(Nums[0]), Trunc(Nums[1])); Canvas.LineTo(Trunc(Nums[2]), Trunc(Nums[3])); Result:= True; end else if Inst = 'ELP' then begin Pn.Width:= Trunc(Nums[4]); if Length(Nums) > 5 then begin Br.Style:= bsSolid; Br.Color:= Trunc(Nums[5]); end; Canvas.Ellipse(Trunc(Nums[0]),Trunc(Nums[1]),Trunc(Nums[2]),Trunc(Nums[3])); Result:= True; end else if Inst = 'ARC' then begin Pn.Width:= Trunc(Nums[8]); Canvas.Arc(Trunc(Nums[0]),Trunc(Nums[1]),Trunc(Nums[2]),Trunc(Nums[3]), Trunc(Nums[4]),Trunc(Nums[5]),Trunc(Nums[6]),Trunc(Nums[7])); Result:= True; end else if Inst = 'TXT' then begin Canvas.Font.Size:= Trunc(Nums[2]); Br.Style:= bsClear; Pn.Style:= psSolid; T:= Cmd; Delete(T, 1, Pos(' ', T)); Delete(T, 1, Pos(',', T)); Delete(T, 1, Pos(',', T)); Delete(T, 1, Pos(',', T)); Canvas.TextOut(Trunc(Nums[0]), Trunc(Nums[1]), T); Result:= True; end; end else begin //No space found, not a valid command end; end; end; end; What I'd like to know is what's a good lightweight third-party scripting engine I could use to accomplish this? I would hate to implement parsing of IF, THEN, ELSE, END, IFELSE, IFEND, and all those necessary commands. I need simply the ability to tell the scripting engine if certain properties meet certain conditions, it needs to draw the object a certain way. The light example above is only one scenario, but the same solution needs to also be applicable to other scenarios, such as a door being open or closed, locked or unlocked, and draw it a different way accordingly. This needs to be implemented in the object script drawing level. I can't hard-code any of these scripting/drawing rules, the drawing needs to be controlled based on the current state of the object, and I may also wish to draw a light a certain shade or darkness depending on how dimmed the light is.

  Read the article

< Previous Page | 70 71 72 73 74 75 76 77 78 79 80 81  | Next Page >