Search Results

Search found 27931 results on 1118 pages for 'custom configuration'.

Page 745/1118 | < Previous Page | 741 742 743 744 745 746 747 748 749 750 751 752  | Next Page >

  • Remote Access Problems with DRAC 5 on Dell PowerEdge 1950

    - by Darin Peterson
    Today I received my first Dell PowerEdge 1950 server with a DRAC 5 card. On my local network I have static configurations on my Linux systems using this for instance: iface eth0 inet static address 192.168.1.210 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.1 dns-nameservers 8.8.8.8 8.8.4.4 For the DRAC card, I configured the LAN like this: address 192.168.1.215 netmask 255.255.255.0 gateway 192.168.1.1 For the advanced LAN settings I used dns-nameservers 8.8.8.8 8.8.4.4 I've tried many different IP addresses, but cannot communicate with the card. Is there anyone who might know if I have configuration issues, or maybe if the card might be bad?

    Read the article

  • off-the-shelf HDD in Dell Optiplex 755 - Invalid Replacement - Press F1 when rebooting

    - by Eric Liprandi
    Hi, I recently put an SSD into my work Optiplex 755. Since then, every time the system boots or reboots, I get prompted to hit F1 to continue with a message like HDD replacement is not valid. The system works just fine. What I am gathering from Dell's website is that I left the original drive internally as a data drive. And apparently the Optiplex does not support 2 drives in the configuration we purchased originally and complains. Any suggestions on how to get rid of this message? some suggested the MEBx or whatever from Intel and to turn it off, but I did not succeed earlier. It's not a big deal 80% of the time, but I regularly work from home and occasionally need to fire a reboot and well, you don't get the BIOS screen remotely :) Regards, Eric.

    Read the article

  • Partimage and autocheck problem when restoring Windows XP from image

    - by Xolstice
    I'm trying to create an image of Windows XP and clone it to several partitions on the same hard drive using Partimage. I seem to be running into a problem when I restore the image onto another partition - when I boot into the OS from the partition I just restored, it brings up this message during the boot sequence: autochk program not found - skipping autocheck, and then after this, the OS reboots the PC and the whole process repeats itself in an infinite loop. After doing some Google search, it is suggested that this loop was caused by the partition being hidden or the mountmgr.sys file is missing. I checked my configuration and verified that this was not the case. I'm just wondering: Has anyone else experienced this and is there a solution for it? Is this what happens when you try to restore the image to a different partition on the same hard disk or is Partimage itself the problem? Should I be trying out a different partition cloning software?

    Read the article

  • How to skip pushing the default gateway via DHCP in OpenWRT?

    - by francadaval
    I have a router with OpenWRT that I want to resolve IP addressing with DHCP without setting a default gateway. I have added a DHCP-Option parameter with value 3,0.0.0.0 that is supposed to set the default gateway by DHCP. Instead, the router IP is defined as default gateway for DHCP connections. How can I set a null default gateway (0.0.0.0) for connections configuration by DHCP? As said in a comment: I want this router to service a VirtualBox network that doesn't set a default gateway via DHCP.

    Read the article

  • anyone doing php-fpm and APC? cache files missing in /tmp

    - by Vangel
    I have been using xcache for a long time. Recently I put together php-fpm and nginx. I see apc is installed and enabled in the configuration. I was assuming that apc will automatically opcode the files and store it somewhere. According to config it should be in /tmp/apx.xxxx but there is no such thing there. What am i missing? any clues to investigate would be of much help. Please note I am using php 5.3 fpm. thanks mates. UPDATE: i looked at apc.php it says things are fine. will just have to take its word for it.

    Read the article

  • DON'T MISS: Live Webcast - Nimble SmartStack for Oracle with Cisco UCS (Nov 12)

    - by Zeynep Koch
    You are invited to the live webcast with Nimble Storage, Oracle and Cisco where we will talk about the new SmartStack solution from Nimble Storage that features Oracle Linux, Oracle VM and Cisco UCS products. In this webinar, you will learn how Nimble Storage SmartStack with Oracle and Cisco provides a converged infrastructure for Oracle Database environments with Oracle Linux and Oracle VM. SmartStack, built on best-of-breed components, delivers the performance and reliability needed for deploying Oracle on a single symmetric multiprocessing (SMP) server or Oracle Real Application Clusters (RAC) on multiple nodes.  When : Tuesday, November 12, 2013, 11:00 AM Pacific Time Panelists: Michele Resta, Director of Linux and Virtualization Alliances, Oracle John McAbel, Senior Product Manager, Cisco Ibby Rahmani, Solutions Marketing, Nimble Storage SmartStack™solutions provide pre-validated reference architectures that speed deployments and minimize risk.      The pre-validated converged infrastructure is based on an Oracle Validated Configuration that includes Oracle Database and Oracle Linux with the Unbreakable Enterprise Kernel.     The solution components include a Nimble Storage CS-Series array, two Cisco UCS B200 M3 blade servers, Oracle Linux 6 Update 4 with the Unbreakable Enterprise Kernel, and Oracle Database 11g Release 2 or Oracle Database 12c Release 1.     The Nimble Storage CS-Series is certified with Oracle VM 3.2 providing an even more flexible solution leveraging virtualization for functions such as test and development by delivering excellent random I/O performance in Oracle VM environments. Register today 

    Read the article

  • Mapping tomcat apache worker

    - by metamorpheus
    I am running an Apache2 server connected with Tomcat5.5 Workers.properties workers.tomcat_home=/usr/share/tomcat5.5 workers.java_home=/usr/lib/jvm/java-6-sun ps=/ worker.list=worker1 worker.worker1.port=8009 worker.worker1.host=127.0.0.1 worker.worker1.type=ajp13 worker.worker1.lbfactor=1 The JkMount is defined as follows LoadModule jk_module /usr/lib/apache2/modules/mod_jk.so JkWorkersFile /etc/apache2/workers.properties JkLogFile /var/log/apache2/mod_jk.log JkLogLevel debug JkLogStampFormat "[%a %b %d %H:%M:%S %Y] " JkMount /jsp-examples worker1 JkMount /jsp-examples/* worker1 JkMount /servlets-examples worker1 JkMount /servlets-examples/* worker1 JkMount /tcontainer worker1 JkMount /tcontainer/* worker1 If i call 127.0.0.1/servlets-examples, i get the examples displayed and executed correctly. If i call [same server as above]/tcontainer, i get the following error: The requested resource (/tcontainer) is not available. (this is an error provided by tomcat5.5) How can i define where to get the sources? i have a configuration file in /usr/share/tomcat-5.5-webapps/tcontainer.xml: <Context path="/tcontainer" docBase="/var/www/web96/html/tcontainer" debug="0" privileged="true" allowLinking="true"> </Context> What did i forget to configure or what is wrong with my definitions? Thanks

    Read the article

  • ANNOUNCEMENT: Oracle VM 3 Templates Available for Oracle Secure Global Desktop 4.62

    - by Mohan Prabhala
    Today, we are proud to announce the general availability of Oracle VM 3 templates for Oracle Secure Global Desktop version 4.62.  With Oracle VM 3 templates, anyone using Oracle VM 3 need not download, install and configure the Operating System and product(s) individually. In this case, the supported operating system (Oracle Linux 5.7) and Oracle Secure Global Dekstop 4.62 product is packaged together into a template that one can easily import and clone as a VM into Oracle VM 3. This results in a nearly instant deployment and configuration of Oracle Secure Global Desktop within Oracle VM 3.  This means drastically reducing the evaluation and deployment time for Oracle Secure Global Desktop when leveraging Oracle VM 3. Feel free to give it a try! Login into the Oracle VM section at Oracle Software Delivery Cloud  (click on 'Cloud Portal (Main)' at the top-right) and: Under Oracle VM templates - x86 64-bit, look for Oracle VM 3 Template (OVF) for Oracle Secure Global Desktop Media Pack for x86_64 (64 bit) Oracle Secure Global Desktop 4.62 template for x86_64 (64 bit) with Oracle Linux 5.7 Under Oracle VM templates – x86 32 bit, look for Oracle VM 3 Template (OVF) for Oracle Secure Global Desktop Media Pack for x86 (32 bit) Oracle Secure Global Desktop 4.62 template for x86 (32 bit) with Oracle Linux 5.7 Download any of the above templates. Once you are done, you must First import the assembly (ova) file that you downloaded from Oracle Software Delivery Cloud Next, create a virtual machine template from the assembly And finally create a virtual machine from the template. Once the virtual machine is created and starts up, be sure to configure the networking parameters (hostname, IP address, netmask, gateway etc), and optional user parameters correctly. You must also enter a root password during first boot. And that's it - the Oracle Secure Global Desktop install script will pick up the networking parameters, prompt for confirmation and complete a default installation. Once the installation is complete, you may want to refer to the Oracle Secure Global Desktop Administration Guide to learn more about Oracle Secure Global Desktop and its capabilities.

    Read the article

  • Mandatory Profiles on a Server 2003 TS Box

    - by Chloe
    I have a Windows Server 2003 box which will be acting as a terminal server. It will actually be running Citrix, but I don't believe that to be relevant here. There has been a request for every user to use a single mandatory profile. I've used mandatory profiles before, but there have been generally different profiles for different users so I've always used the "Terminal Services Profile" tab to good effect. What I'd like this time is a single setting, such as a Group Policy or similar that simply forces every non-domain admin user logging on to the box into using the mandatory profile. We'll be using Folder Redirection to take care of everything else. I'm aware of the following GPO: Computer Policy\Computer Configuration\Administrative Templates\Windows Components/Terminal Services Set path for TS Roaming Profiles But, as that's a computer policy, will it not apply to all users including administrators? If so, is it possible to exclude admins somehow?

    Read the article

  • Setting lusca and dansguardian iptables on Ubuntu 12.04 to prevent loop

    - by Heri YT
    I have a server with ubuntu 12:04 operating system, which runs as a proxy cache server lusca and DansGuardian as well as internet content filter. With the following composition: the client browser - lusca - DansGuardian - internet. And all this running only on one machine only, the following is a partial configuration on my server lusca: http_port 3128 transparent cache_peer 192.168.0.1 parent 8080 0 no-query no-digest no-netdb-exchange default which is also only found on the DansGuardian default settings namely: filterip="blank" filterport=8080 proxyip=192.168.0.1 proxyport=3128 The question is: Can all goes well? By simply relying on one machine only? What causes the "WARNING: Forwarding loop detected for:"? is not problematic if we leave? How to solve "WARNING: Forwarding loop detected for:" found in / var / log / lusca / cache.log Thank you.

    Read the article

  • Available Instance types for marketplace ami's

    - by Christian
    I based my autoscaling AMI's on the Turnkey Linux nginx AMI from the marketplace. I am now unable to select any of the newer generation instance types; for instance, my autoscaling uses m3.large type but I'd really like it to use the c3.xlarge type but every time I try to create a c3.xlarge instance with my AMI I get errors; The instance configuration for this AWS Marketplace product is not supported. My question is; Can I override this? I'm not using TKL support or any of their services, just the AMI. If I can't override it, do I have any other options besides creating a brand new AMI from scratch to use?

    Read the article

  • DSL PPPoE connection not working?

    - by Mussnoon
    I use a wired PPPoE connection to connect to the Internet. What I need to do on Windows to connect to it is put in static IP address, gateway, subnet mask and DNS servers for my LAN card. Next I have to create a dialer for a PPPoE connection, put in my user name, the service name and the password, and "dial" this connection. And it works fine. On Ubuntu 10.04, however, I have tried setting things up in a similar fashion - put in all static addresses for the "automatic" wired connection, then put in user name, service name, password for a "DSL" connection. It worked for a while, then stopped. I have tried putting in all the details within the DSL configuration dialog, same thing happened - it worked for a while, then stopped. I have tried deleting the ethernet connection and only keeping the DSL one with all the numbers put in place, same thing happened - it worked for a while, then stopped. Each of the times, when it connected, it connected randomly, after trying a few times, and either stopped working within a few minutes, or after I had rebooted. I have deleted and remade the connection dozens of times - even with different names, but nothing seems to be working. I have also tried pppoeconf from the terminal, didn't work. I have checked /var/log/kern.log, but nothing changes in the file when I try to connect. I have also checked /sbin/route, but gedit can't even open it (says it can't figure the character encoding...). The "connection established" notification pops up from the top right corner, the same way as when the computer is actually connected to a network. Can anyone figure what's wrong and how it can be solved?

    Read the article

  • How can I tell whether an interrupted rm -r removed any files?

    - by Jake Petroules
    I installed sshfs a Linux box and then mounted my Mac home directory. In the middle of troubleshooting a configuration issue, I did an ls -l on the mount directory (as normal user), receiving: total 0 d????????? ? ? ? ? ? sl I then ran sudo rm -r on that directory but pressed Ctrl+C to terminate it immediately before it (looks) like the command did anything. I notice no files missing but I want to be sure - is there a way I can somehow inspect the filesystem log on my Mac to see if any files were actually removed?

    Read the article

  • Problem to install Apache 2.4.2 in Ubuntu 12.04

    - by Michael
    I followed these steps to install Apache 2.4.2 in Ubuntu 12.04, but it seems Apache is not installed, here's what I did (I followed the steps in this site http://www.discusswire.com/apache-2-4-installation-ubuntu/): sudo apt-get install build-essential sudo apt-get build-dep apache2 wget http://apache.mirrors.pair.com/httpd/httpd-2.4.2.tar.gz tar -xzvf httpd-2.4.2.tar.gz && cd httpd-2.4.2 sudo ./configure --prefix=/usr/local/apache2 --enable-mods-shared=all --enable-deflate --enable-proxy --enable-proxy-balancer --enable-proxy-http --with-mpm=prefork sudo make sudo make install when I tried to start by issuing sudo /usr/local/apache2/bin/apachectl start at terminal, I got the following warning: "AH00558: httpd: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1. Set the 'ServerName' directive globally to suppress this message" and when I typed top at terminal, the apache is not there. I also tried to go to http://localhost/ or 127.0.0.1 or even 127.0.1.1 it showed "Can't establish connection to server ..." message. ps: I checked the error log and it showed "[Fri Jul 27 15:49:00.703901 2012] [proxy_balancer:emerg] [pid 20781] AH01177: Failed to lookup provider 'shm' for 'slotmem': is mod_slotmem_shm loaded?? [Fri Jul 27 15:49:00.704083 2012] [:emerg] [pid 20781] AH00020: Configuration Failed, exiting" What I'm missing? Thanks Michael

    Read the article

  • Exchange 2010 SP2 Not Allowing Logon for Users with Expired Passwords

    - by JJ.
    When we provision users we set the "User must change password at next logon" flag and instruct them to go to OWA to login for the first time and change their password. Using the registry setting ChangeExpiredPasswordEnabled as explained here: http://technet.microsoft.com/en-us/library/bb684904.aspx worked well prior to SP2 installation. This allows users with 'expired' passwords to logon and forces a password change before they can access OWA. We just installed Exchange 2010 Service Pack 2 and now it's no longer working. Users with this flag set ('expired' passwords) can't login in at all unless we clear the flag. FYI here's the registry key configuration as set now with SP2 installed: Any suggestions as to how I might fix this? Or did MS break this feature in Service Pack 2?

    Read the article

  • Configuring a Jetty web application on a different port

    - by sHz
    Hi folks, I'm brand new to Jetty. I'd like to ask if its possible to have Jetty listening on port 8080, however where specified, serve a specific web application under say /var/jetty/webapps/<appname> (default on CentOS) served on say port 10000 instead of http://localhost:8080/<appname> i.e. http://localhost:10000/ = http://localhost:8080/<appname&gt; ? If so, what configuration changes would be required to make this work without an additional proxy server? I've googled away, but haven't found a solution (perhaps I've missed something obvious?).

    Read the article

  • Should I choose Doctrine 2 or Propel 1.5/1.6, and why?

    - by Billy ONeal
    I'd like to hear from those who have used Doctrine 2 (or later) and Propel 1.5 (or later). Most comparisons between these two object relational mappers are based on old versions -- Doctrine 1 versus Propel 1.3/1.4, and both ORMs went through significant redesigns in their recent revisions. For example, most of the criticism of Propel seems to center around the "ModelName Peer" classes, which are deprecated in 1.5 in any case. Here's what I've accumulated so far (And I've tried to make this list as balanced as possible...): Propel Pros Extremely IDE friendly, because actual code is generated, instead of relying on PHP magic methods. This means IDE features like code completion are actually helpful. Fast (In terms of database usage -- no runtime introspection is done on the database) Clean migration between schema versions (at least in the 1.6 beta) Can generate PHP 5.3 models (i.e. namespaces) Easy to chain a lot of things into a single database query with things like useXxx methods. (See the "code completion" video above) Cons Requires an extra build step, namely building the model classes. Generated code needs rebuilt whenever Propel version is changed, a setting is changed, or the schema changes. This might be unintuitive to some and custom methods applied to the model are lost. (I think?) Some useful features (i.e. version behavior, schema migrations) are in beta status. Doctrine Pros More popular Doctrine Query Language can express potentially more complicated relationships between data than easily possible with Propel's ActiveRecord strategy. Easier to add reusable behaviors when compared with Propel. DocBlock based commenting for building the schema is embedded in the actual PHP instead of a separate XML file. Uses PHP 5.3 Namespaces everywhere Cons Requires learning an entirely new programming language (Doctrine Query Language) Implemented in terms of "magic methods" in several places, making IDE autocomplete worthless. Requires database introspection and thus is slightly slower than Propel by default; caching can remove this but the caching adds considerable complexity. Fewer behaviors are included in the core codebase. Several features Propel provides out of the box (such as Nested Set) are available only through extensions. Freakin' HUGE :) This I have gleaned though only through reading the documentation available for both tools -- I've not actually built anything yet. I'd like to hear from those who have used both tools though, to share their experience on pros/cons of each library, and what their recommendation is at this point :)

    Read the article

  • Varnish 3.0.2 to Apache2 sometimes return error 503

    - by Ronnie Jespersen
    Hey guys I hope you can help me out here. I have an Ngingx parsing http and https to a varnish cache(3.0.2). From the varnish it is sent to apache2. Now I have for some time been tracking some strange 503 errors. But I cant seem to find the silver bullet. Currently I am logging the 503 errors through varnish this way: sudo varnishlog -c -m TxStatus:503 >> /home/rj/varnishlog503.log and then referring to the apache access log to see if any 503 requests have been handled. Today I had a health check from the firewall that failed: 20 SessionOpen c 127.0.0.1 34319 :8081 20 ReqStart c 127.0.0.1 34319 607335635 20 RxRequest c HEAD 20 RxURL c /health-check 20 RxProtocol c HTTP/1.0 20 RxHeader c X-Real-IP: 192.168.3.254 20 RxHeader c Host: 192.168.3.189 20 RxHeader c X-Forwarded-For: 192.168.3.254 20 RxHeader c Connection: close 20 RxHeader c User-Agent: Astaro Service Monitor 0.9 20 RxHeader c Accept: */* 20 VCL_call c recv lookup 20 VCL_call c hash 20 Hash c /health-check 20 VCL_return c hash 20 VCL_call c miss fetch 20 Backend c 33 aurum aurum 20 FetchError c http first read error: -1 11 (No error recorded) 20 VCL_call c error deliver 20 VCL_call c deliver deliver 20 TxProtocol c HTTP/1.1 20 TxStatus c 503 20 TxResponse c Service Unavailable 20 TxHeader c Server: Varnish 20 TxHeader c Content-Type: text/html; charset=utf-8 20 TxHeader c Retry-After: 5 20 TxHeader c Content-Length: 879 20 TxHeader c Accept-Ranges: bytes 20 TxHeader c Date: Wed, 06 Jun 2012 12:35:12 GMT 20 TxHeader c X-Varnish: 607335635 20 TxHeader c Age: 60 20 TxHeader c Via: 1.1 varnish 20 TxHeader c Connection: close 20 Length c 879 20 ReqEnd c 607335635 1338986052.649786949 1338986112.648169994 0.000160217 59.997980356 0.000402689 Now the backend server (apache) does not have any 503 error in the access log at this point. So I am confused. Is this varnish throwing a 503 because it thinks apache is to slow? There is a lot traffic coming through at this point so I know the server is up and running. I do have other 503 error codes with posts and gets so there is really no pattern. It seems to be at random times and random requests. Even in the morning when the server dosen't seem to be doing anything. I do see another pattern in the log: 4 VCL_call c recv pass 4 VCL_call c hash 4 Hash c /?id=412 4 VCL_return c hash 4 VCL_call c pass pass 4 FetchError c no backend connection 4 VCL_call c error deliver 4 VCL_call c deliver deliver Here fetcherror says "no backend connection". A summery of the FetchErrors in todays log: 16 FetchError c http first read error: -1 11 (No error recorded) 5 FetchError c http first read error: -1 11 (No error recorded) 4 FetchError c http first read error: -1 11 (No error recorded) 19 FetchError c http first read error: -1 11 (No error recorded) 5 FetchError c http first read error: -1 11 (No error recorded) 23 FetchError c http first read error: -1 11 (No error recorded) 24 FetchError c http first read error: -1 11 (No error recorded) 16 FetchError c http first read error: -1 11 (No error recorded) 6 FetchError c http first read error: -1 11 (No error recorded) 4 FetchError c http first read error: -1 11 (No error recorded) 5 FetchError c http first read error: -1 11 (No error recorded) 4 FetchError c http first read error: -1 11 (No error recorded) 4 FetchError c http first read error: -1 11 (No error recorded) 22 FetchError c http first read error: -1 11 (No error recorded) 6 FetchError c http first read error: -1 11 (No error recorded) 21 FetchError c http first read error: -1 11 (No error recorded) 26 FetchError c no backend connection 4 FetchError c no backend connection 20 FetchError c http first read error: -1 11 (No error recorded) 39 FetchError c http first read error: -1 11 (No error recorded) I haven't changed the default timeout values for varnish. This is my configuration for one of the backend servers. backend xenon { .host = "192.168.3.187"; .port = "80"; .probe = { .url = "/health-check/"; .interval = 3s; .window = 5; .threshold = 2; } } I'm running prefork module on apache2 with this configuration <IfModule mpm_prefork_module> StartServers 1 MinSpareServers 2 MaxSpareServers 5 MaxClients 200 MaxRequestsPerChild 75 </IfModule> and only PHP files is sent to the server. Every other static file is handled by Nginx. Any ideas? ------- EDIT -------------- Some more debuging information I have run a varnishadm debug.health Backend radon is Healthy Current states good: 5 threshold: 2 window: 5 Average responsetime of good probes: 0.002560 Oldest Newest ================================================================ 4444444444444444444444444444444444444444444444444444444444444444 Good IPv4 XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX Good Xmit RRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR Good Recv HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH Happy Backend xenon is Healthy Current states good: 5 threshold: 2 window: 5 Average responsetime of good probes: 0.002760 Oldest Newest ================================================================ 4444444444444444444444444444444444444444444444444444444444444444 Good IPv4 XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX Good Xmit RRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR Good Recv HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH Happy Backend iridium is Healthy Current states good: 5 threshold: 2 window: 5 Average responsetime of good probes: 0.000849 Oldest Newest ================================================================ 4444444444444444444444444444444444444444444444444444444444444444 Good IPv4 XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX Good Xmit RRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR Good Recv HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH Happy Backend aurum is Healthy Current states good: 5 threshold: 2 window: 5 Average responsetime of good probes: 0.002100 Oldest Newest ================================================================ 4444444444444444444444444444444444444444444444444444444444444444 Good IPv4 XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX Good Xmit RRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR Good Recv HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH Happy And I have been monitoring varnishstat from the two load balancers 3224774 3.99 2.61 backend_conn - Backend conn. success 27 0.00 0.00 backend_unhealthy - Backend conn. not attempted 63 0.00 0.00 backend_fail - Backend conn. failures 358798 0.00 0.29 backend_reuse - Backend conn. reuses 21035 0.00 0.02 backend_toolate - Backend conn. was closed 379834 0.00 0.31 backend_recycle - Backend conn. recycles 26 0.00 0.00 backend_retry - Backend conn. retry 3217751 5.99 2.61 backend_conn - Backend conn. success 32 0.00 0.00 backend_fail - Backend conn. failures 364185 0.00 0.30 backend_reuse - Backend conn. reuses 27077 0.00 0.02 backend_toolate - Backend conn. was closed 391263 0.00 0.32 backend_recycle - Backend conn. recycles 36 0.00 0.00 backend_retry - Backend conn. retry Notice that none of them have reported backend_fail. /Ronnie

    Read the article

  • Why doesn't update-manager allow me to upgrade distribution?

    - by spoulson
    I have an Ubuntu 9.04 PC behind a corporate firewall and proxy server. This requires that in order to get update-manager to fetch and apply updates, I must set the proxy and authentication settings in the Synaptic network configuration. Once done, I can check for updates and things work smoothly (except I don't get popup notifications of new updates, must manually check periodically). However, distribution updates just don't show up in update-manager, such as the newly released 9.10 Karmic Koala. I had the same issue in upgrading 8.10 to 9.04 and solved it by downloading and upgrading from the 9.04 ISO. What do I need to do to upgrade to 9.10 using the standard update-manager UI?

    Read the article

  • How to change from own Internal/Extrernal DNS to use an outsourced service like DNS Made Easy?

    - by Joakim
    Our current setup is a co-located linux box with an openvz kernel with a handful virtual containers for www, mail etc. and one container run Bind9 with a split views configuration serving External and Internal DNS. The HW-Node runs a shorewall firewall and all containers uses private ip's. The box (and DNS) basically handles web and mail for a handful domains and it works well but we still think it would be a good idea to outsource the public DNS and now to my question... Although I am fairly comfortable with the server stuff and DNS, I'm far from a pro and guess I basically need some confirmation that I am thinking in the right direction in that I basically just move the content of our external view (with zone files) to the external service and keep the internal view (or actually remove the view), update the new external DNS with thier names servers, update the info at my registrar and wait for propagation or have I missed something? Maybe someone else here run something similar already and can share some exteriences? I found this question which at least confirms it can be done.

    Read the article

  • What are the options for hosting a small Plone site? [closed]

    - by Tina Russell
    Possible Duplicate: How to find web hosting that meets my requirements? I’ve developed a portfolio website for myself using Plone 4, and I’m looking for someplace to host it. Most Plone hosting services seem to focus on large, corporate deployments, but I need something that I can afford on a very limited budget and fits a small, single-admin website. My understanding is that my basic options are thus: I can go with a hosting service that specifically provides Plone. I know of WebFaction, but what others exist? Also, I’d have two stipulations for a Plone hosting service: (a) It needs to use Plone 4, for which I’ve developed my site, and (b) it needs to allow me SSH access to a home directory (including the Plone configuration), so that I may use my custom development eggs and such. I could use a VPS hosting service. What are my options here? Again, I need something cheap and scaled to my level. I could use Amazon EC2 or a similar service (please tell me of any) and pay by the tiniest unit of data. I’m a little scared of this because I have no idea how to do a cost-benefit analysis between this and a regular VPS host. The advantage of this approach would be that I only pay for what I use, making it very scalable, but I don’t know how the overall cost would compare to any VPS host under similar circumstances. What factors enter into the cost of Amazon EC2? What can I expect to pay under either option for regular traffic for a new website? Which one is more desirable for when a rush of visitors drive up my bandwidth bill? One last note: I know Plone isn’t common for websites for individuals, but please don’t try to talk me out of it here; that’s a completely different subject. For now, assume I’m sticking with Plone for good. Also, I have seen the Plone hosting services list on Plone.org—it’s twenty pages long, and the first page was nothing but professional Plone consulting services that sometimes offer hosting for business clients. So, that wasn’t much help. Thank you!

    Read the article

  • Ideas for SVN/SQL/PHP/Linux Dev Enviroment Supporting Multiple Isolated Environments?

    - by jpganz18
    I am trying to create a "dev" for my users. In that environment they would access to their own account of PHPMyAdmin, SQL, Subversion and FTP which is not a big problem, but I would like to emulate like if each one would be in their own server. I mean so that they could change the PHP configuration (for example) and would be done only in its own environment. Any idea how to do this? Do I have to make something "special" at the installations of my server or something like that?

    Read the article

  • SQL SERVER – Get Free Books on While Learning SQL Server 2012 Error Handling

    - by pinaldave
    Fans of this blog are aware that I have recently released my new books SQL Server Functions and SQL Server 2012 Queries. The books are available in market in limited edition but you can avail them for free on Wednesday Nov 14, 2012. Not only they are free but you can additionally learn SQL Server 2012 Error Handling as well. My book’s co-author Rick Morelan is presenting a webinar tomorrow on SQL Server 2012 Error Handling. Here is the brief abstract of the webinar: People are often shocked when they see the demo in this talk where the first statement fails and all other statements still commit. For example, did you know that BEGIN TRAN…COMMIT TRAN is not enough to make everything work together? These mistakes can still happen to you in SQL Server 2012 if you are not aware of the options. Rick Morelan, creator of Joes2Pros, will teach you how to predict the Error Action and control it with & without structured error handling. Register for the webinar now to learn: How to predict the Error Action and control it Nuances between successful and failing SQL statements Essential SQL Server 2012 configuration options Register for the Webinar and be present during the webinar. My co-author will announce a winner (may be more than 1 winner) during the session. If you are present during the session – you are eligible to win the book. The webinar is scheduled for 2 different times to accommodate various time zones. 1) 10am ET/7am PT 2) 1pm ET/11am PT. Each webinar will have their own winner. You can increase your chances by attending both the webinars. Do not miss this opportunity and register for the webinar right now. The recordings of the webinar may not be available. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Joes 2 Pros, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority News, SQLServer, T SQL, Technology

    Read the article

  • Virtual Developer Day: Oracle Fusion Development - December 11th - 10:00-14:00 CET

    - by Richard Lefebvre
    Get up to date and learn everything you wanted to know about Oracle ADF & Fusion Development plus live Q&A chats with Oracle technical staff. Oracle Application Development Framework (ADF) is the standards based, strategic framework for Oracle Fusion Applications and Oracle Fusion Middleware. Oracle ADF's integration with the Oracle SOA Suite, Oracle WebCenter and Oracle BI creates a complete productive development platform for your custom applications. Join us at this FREE virtual event and learn the latest in Fusion Development including: Is Oracle ADF development faster and simpler than Forms, Apex or .Net? Mobile Application Development with ADF Mobile Oracle ADF development with Eclipse Oracle WebCenter Portal and ADF Development Application Lifecycle Management with ADF Building Process Centric Applications with ADF and BPM Oracle Business Intelligence and ADF Integration Live Q&A chats with Oracle technical staff Developer lead, manager or architect – this event has something for everyone. Don't miss this opportunity. December 11th, 2012 9:00 – 13:00 GMT 10:00 – 14:00 CET 12:00 – 16:00 AST 13:00 – 17:00 MSK 14:30 – 18:30 IST Register online now for this FREE event! Agenda 9:00 a.m. – 9:30 a.m. Opening 9:30 a.m. – 10:00 a.m. Keynote Oracle Fusion Development Track 1 Introduction to Fusion Development Track 2 What's New in Fusion Development Track 3 Fusion Development in the Enterprise Track 4 Hands On Lab - WebCenter Portal and ADF Lab w/ JDeveloper 10:00 a.m. – 11:00 a.m. Is Oracle ADF development faster and simpler than Forms, Apex or .Net? Mobile Application Development with ADF Mobile Oracle WebCenter Portal and ADF Development Lab materials can be found on event wiki here. Q&A about the lab is available throughout the event. 11:00 a.m. – 12:00 p.m. Rich Web UI made simple – an ADF Faces Overview Oracle Enterprise Pack for Eclipse - ADF Development Building Process Centric Applications with ADF and BPM 12:00 p.m. – 1:00 p.m. Next Generation Controller for JSF Application Lifecycle Management for ADF Oracle Business Intelligence and ADF Integration View Session Abstracts We look forward to welcoming you at this free event!  

    Read the article

  • Team Foundation Server 2012 Build Global List Problems

    - by Bob Hardister
    My experience with the upgrade and use of TFS 2012 has been very positive. I did come across a couple of issues recently that tripped things up for a while. ISSUE 1 The first issue is that 2012 prior to Update 1 published an invalid build list item value to the collection global list. In 2010, the build global list, list item value syntax is an underscore between the build definition and the build number. In the 2012 RTM this underscore was replaced with a backslash, which is invalid.  Specifically, an upload of the global list fails when the backslash is followed at some point by a period. The error when using the API is: <detail ExceptionMessage="TF26204: The account you entered is not recognized. Contact your Team Foundation Server administrator to add your account." BaseExceptionName="Microsoft.TeamFoundation.WorkItemTracking.Server.ValidationException"><details id="600019" http://schemas.microsoft.com/TeamFoundation/2005/06/WorkItemTracking/faultdetail/03"http://schemas.microsoft.com/TeamFoundation/2005/06/WorkItemTracking/faultdetail/03" /></detail> when uploading the global list via the process editor the error is: This issue is corrected in Update1 as the backslash is changed to a forward slash. ISSUE 2 The second issue is that when upgrading from 2010 to 2012, the builds in 2010 are not published to the 2012 global list.  After the upgrade the 2012 global lists doesn’t have any builds and only builds run in 2012 are published to the global list. This was reported to the MSDN forums and Connect. To correct this I wrote a utility to pull all the builds and recreate the builds global list for each project in each collection.  This is a console application with a program.cs, a globallists.cs and a app.config (not published here). The utility connects to TFS 2012, loops through the collections or a target collection as specified in the app.config. Then loops through the projects, the build definitions, and builds.  It creates a global list for each project if that project has at least one build. Then it imports the new list to TFS.  Here’s the code for program and globalists classes. Program.CS using System; using System.Collections.Generic; using System.Linq; using System.Text; using Microsoft.TeamFoundation.Framework.Client; using Microsoft.TeamFoundation.Framework.Common; using Microsoft.TeamFoundation.Client; using Microsoft.TeamFoundation.Server; using System.IO; using System.Xml; using Microsoft.TeamFoundation.WorkItemTracking.Client; using System.Diagnostics; using Utilities; using System.Configuration; namespace TFSProjectUpdater_CLC { class Program { static void Main(string[] args) { DateTime temp_d = System.DateTime.Now; string logName = temp_d.ToShortDateString(); logName = logName.Replace("/", "_"); logName = logName + "_" + temp_d.TimeOfDay; logName = logName.Replace(":", "."); logName = "TFSGlobalListBuildsUpdater_" + logName + ".log"; Trace.Listeners.Add(new TextWriterTraceListener(Path.Combine(ConfigurationManager.AppSettings["logLocation"], logName))); Trace.AutoFlush = true; Trace.WriteLine("Start:" + DateTime.Now.ToString()); Console.WriteLine("Start:" + DateTime.Now.ToString()); string tfsServer = ConfigurationManager.AppSettings["TargetTFS"].ToString(); GlobalLists gl = new GlobalLists(); //replace this with the URL to your TFS instance. Uri tfsUri = new Uri("https://" + tfsServer + "/tfs"); //bool foundLite = false; TfsConfigurationServer config = new TfsConfigurationServer(tfsUri, new UICredentialsProvider()); config.EnsureAuthenticated(); ITeamProjectCollectionService collectionService = config.GetService<ITeamProjectCollectionService>(); IList<TeamProjectCollection> collections = collectionService.GetCollections().OrderBy(collection => collection.Name.ToString()).ToList(); //target Collection string targetCollection = ConfigurationManager.AppSettings["targetCollection"]; foreach (TeamProjectCollection coll in collections) { if (targetCollection.Equals(string.Empty)) { if (!coll.Name.Equals("TFS Archive") && !coll.Name.Equals("DefaultCol") && !coll.Name.Equals("Team Project Template Gallery")) { doWork(coll, tfsServer); } } else { if (coll.Name.Equals(targetCollection)) { doWork(coll, tfsServer); } } } Trace.WriteLine("Finished:" + DateTime.Now.ToString()); Console.WriteLine("Finished:" + DateTime.Now.ToString()); if (System.Diagnostics.Debugger.IsAttached) { Console.WriteLine("\nHit any key to exit..."); Console.ReadKey(); } Trace.Close(); } static void doWork(TeamProjectCollection coll, string tfsServer) { GlobalLists gl = new GlobalLists(); //target Collection string targetProject = ConfigurationManager.AppSettings["targetProject"]; Trace.WriteLine("Collection: " + coll.Name); Uri u = new Uri("https://" + tfsServer + "/tfs/" + coll.Name.ToString()); TfsTeamProjectCollection c = TfsTeamProjectCollectionFactory.GetTeamProjectCollection(u); ICommonStructureService icss = c.GetService<ICommonStructureService>(); try { Trace.WriteLine("\tChecking Collection Global Lists."); gl.RebuildBuildGlobalLists(c); } catch (Exception ex) { Console.WriteLine("Exception! :" + coll.Name); } } } } GlobalLists.CS using System; using System.Collections.Generic; using System.Linq; using System.Text; using Microsoft.TeamFoundation.Client; using Microsoft.TeamFoundation.Framework.Client; using Microsoft.TeamFoundation.Framework.Common; using Microsoft.TeamFoundation.Server; using Microsoft.TeamFoundation.WorkItemTracking.Client; using Microsoft.TeamFoundation.Build.Client; using System.Configuration; using System.Xml; using System.Xml.Linq; using System.Diagnostics; namespace Utilities { public class GlobalLists { string GL_NewList = @"<gl:GLOBALLISTS xmlns:gl=""http://schemas.microsoft.com/VisualStudio/2005/workitemtracking/globallists""> <GLOBALLIST> </GLOBALLIST> </gl:GLOBALLISTS>"; public void RebuildBuildGlobalLists(TfsTeamProjectCollection _tfs) { WorkItemStore wis = new WorkItemStore(_tfs); //export the current globals lists file for the collection to save as a backup XmlDocument globalListsFile = wis.ExportGlobalLists(); globalListsFile.Save(@"c:\temp\" + _tfs.Name.Replace("\\", "_") + "_backupGlobalList.xml"); LogExportCurrentCollectionGlobalListsAsBackup(_tfs); //Build a new global build list from each build definition within each team project IBuildServer buildServer = _tfs.GetService<IBuildServer>(); foreach (Project p in wis.Projects) { XmlDocument newProjectGlobalList = new XmlDocument(); newProjectGlobalList.LoadXml(GL_NewList); LogInstanciateNewProjectBuildGlobalList(_tfs, p); BuildNewProjectBuildGlobalList(_tfs, wis, newProjectGlobalList, buildServer, p); LogEndOfProject(_tfs, p); } } // Private Methods private static void BuildNewProjectBuildGlobalList(TfsTeamProjectCollection _tfs, WorkItemStore wis, XmlDocument newProjectGlobalList, IBuildServer buildServer, Project p) { //locate the template node XmlNamespaceManager nsmgr = new XmlNamespaceManager(newProjectGlobalList.NameTable); nsmgr.AddNamespace("gl", "http://schemas.microsoft.com/VisualStudio/2005/workitemtracking/globallists"); XmlNode node = newProjectGlobalList.SelectSingleNode("//gl:GLOBALLISTS/GLOBALLIST", nsmgr); LogLocatedGlobalListNode(_tfs, p); //add the name attribute for the project build global list XmlElement buildListNode = (XmlElement)node; buildListNode.SetAttribute("name", "Builds - " + p.Name); LogAddedBuildNodeName(_tfs, p); //add new builds to the team project build global list bool buildsExist = false; if (AddNewBuilds(_tfs, newProjectGlobalList, buildServer, p, node, buildsExist)) { //import the new build global list for each project that has builds newProjectGlobalList.Save(@"c:\temp\" + _tfs.Name.Replace("\\", "_") + "_" + p.Name + "_" + "newGlobalList.xml"); //write out temp copy of the global list file to be imported LogImportReady(_tfs, p); wis.ImportGlobalLists(newProjectGlobalList.InnerXml); LogImportComplete(_tfs, p); } } private static bool AddNewBuilds(TfsTeamProjectCollection _tfs, XmlDocument newProjectGlobalList, IBuildServer buildServer, Project p, XmlNode node, bool buildsExist) { var buildDefinitions = buildServer.QueryBuildDefinitions(p.Name); foreach (var buildDefinition in buildDefinitions) { var builds = buildDefinition.QueryBuilds(); foreach (var build in builds) { //insert the builds into the current build list node in the correct 2012 format buildsExist = true; XmlElement listItem = newProjectGlobalList.CreateElement("LISTITEM"); listItem.SetAttribute("value", buildDefinition.Name + "/" + build.BuildNumber.ToString().Replace(buildDefinition.Name + "_", "")); node.AppendChild(listItem); } } if (buildsExist) LogBuildListCreated(_tfs, p); else LogNoBuildsInProject(_tfs, p); return buildsExist; } // Logging Methods private static void LogExportCurrentCollectionGlobalListsAsBackup(TfsTeamProjectCollection _tfs) { Trace.WriteLine("\tExported Global List for " + _tfs.Name + " collection."); Console.WriteLine("\tExported Global List for " + _tfs.Name + " collection."); } private void LogInstanciateNewProjectBuildGlobalList(TfsTeamProjectCollection _tfs, Project p) { Trace.WriteLine("\t\tInstanciated the new build global list for project " + p.Name + " in the " + _tfs.Name + " collection."); Console.WriteLine("\t\tInstanciated the new build global list for project \n\t\t\t" + p.Name + " in the \n\t\t\t" + _tfs.Name + " collection."); } private static void LogLocatedGlobalListNode(TfsTeamProjectCollection _tfs, Project p) { Trace.WriteLine("\t\tLocated the build global list node for project " + p.Name + " in the " + _tfs.Name + " collection."); Console.WriteLine("\t\tLocated the build global list node for project \n\t\t\t" + p.Name + " in the \n\t\t\t" + _tfs.Name + " collection."); } private static void LogAddedBuildNodeName(TfsTeamProjectCollection _tfs, Project p) { Trace.WriteLine("\t\tAdded the name attribute to the build global list for project " + p.Name + " in the " + _tfs.Name + " collection."); Console.WriteLine("\t\tAdded the name attribute to the build global list for project \n\t\t\t" + p.Name + " in the \n\t\t\t" + _tfs.Name + " collection."); } private static void LogBuildListCreated(TfsTeamProjectCollection _tfs, Project p) { Trace.WriteLine("\t\tAdded all builds into the " + "Builds - " + p.Name + " list in the " + _tfs.Name + " collection."); Console.WriteLine("\t\tAdded all builds into the " + "Builds - \n\t\t\t" + p.Name + " list in the \n\t\t\t" + _tfs.Name + " collection."); } private static void LogNoBuildsInProject(TfsTeamProjectCollection _tfs, Project p) { Trace.WriteLine("\t\tNo builds found for project " + p.Name + " in the " + _tfs.Name + " collection."); Console.WriteLine("\t\tNo builds found for project " + p.Name + " \n\t\t\tin the " + _tfs.Name + " collection."); } private void LogEndOfProject(TfsTeamProjectCollection _tfs, Project p) { Trace.WriteLine("\t\tEND OF PROJECT " + p.Name); Trace.WriteLine(" "); Console.WriteLine("\t\tEND OF PROJECT " + p.Name); Console.WriteLine(); } private static void LogImportReady(TfsTeamProjectCollection _tfs, Project p) { Trace.WriteLine("\t\tReady to import the build global list for project " + p.Name + " to the " + _tfs.Name + " collection."); Console.WriteLine("\t\tReady to import the build global list for project \n\t\t\t" + p.Name + " to the \n\t\t\t" + _tfs.Name + " collection."); } private static void LogImportComplete(TfsTeamProjectCollection _tfs, Project p) { Trace.WriteLine("\t\tImport of the build global list for project " + p.Name + " to the " + _tfs.Name + " collection completed."); Console.WriteLine("\t\tImport of the build global list for project \n\t\t\t" + p.Name + " to the \n\t\t\t" + _tfs.Name + " collection completed."); } } }

    Read the article

< Previous Page | 741 742 743 744 745 746 747 748 749 750 751 752  | Next Page >