Search Results

Search found 3584 results on 144 pages for 'astral projection forum'.

Page 75/144 | < Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >

  • Hibernating Ubuntu on EC2 instance?

    - by Dan
    I've got an application I'd like to move to EC2. It will likely spend more than half the day completely dormant, so I'm trying to come up with a good solution for starting and stopping it as needed. It takes a few minutes to start up from nothing, so it would be nice if i could hibernate the OS for quicker resumes. I've seen a couple forum discussions on the topic of hibernation within EC2, but never anything conclusive. Has anyone found a working solution to this, or at least some resources that could help me out?

    Read the article

  • Motherboard max memory supported

    - by Ashfame
    I have an Intel DG965RY motherboard and its specification says it supports 8GB with 533 or 667Mhz RAM sticks and only 4GB with 800Mhz RAM sticks. I am running a 64bit OS. I earlier had 2 X 1GB sticks (800Mhz), so I bought 2 X 2GB sticks (800Mhz) and I underclocked them in the settings to run at 667Mhz. Shouldn't it support all 6GB RAM now? It would be a bummer if I will specifically need 667Mhz sticks thinking that at the worst they will underclock and then run at 667Mhz. I tried this because I saw someone posted at some forum that he put in 4GB+ of RAM in the same board @ 800Mhz and the system uses it all. In my case (On Ubuntu), it only shows 3.2GB as of now (link to Question) so needed to confirm if this is a hardware limitation.

    Read the article

  • Office 365 E3 with Exchange Hosted Encryption (EHE)

    - by Stephen
    I hope this is the right forum for posting this question. I have a client who wants to move to Office 365. They are currently running on a trial of Office 365 E3 plan. My staff are now also using Office 365 E3 via the internal use licences provided as part of the MS Cloud Partner benefits. We've search high and low, spoken to about 15 different people at Office 365 Support, as well as my local distributor's MS Product Manager, but we cannot seem to find out exactly how to purchase/subscribe to the Exchange Hosted Encryption (EHE) service, or how to configure/use it from Office 365. Does anybody out there have any insight into how we can setup and use the EHE service? Thanks! Stephen

    Read the article

  • No HDMI audio - Windows 8 - ASUS H81M-PLUS

    - by Paul Wright
    I have an issue with HDMI audio on Windows 8 using an ASUS H81M-PLUS motherboard (without an external GFX card). There are many forum posts advising you to go into playback devices and setting HDMI to be default - I have done this. To eliminate what works and what doesn't work: I have not been able to get sound from my HDTV using HDMI. I have used this HDMI cable with my PS3, so this cable should be fine. I am able to use the HDMI cable in extended mode, so that I have two monitors (including the TV), just no audio. This HDMI cable goes straight from the motherboard to the TV. Below I have included 'Device manager', and 'Playback Devices' (Sound). Device Manager Playback Devices, showing disabled and disconnected devices I am at a loss. I have uninstalled all drivers, and then rebooted and made windows look for the correct ones, made sure the HDMI device was default. Thanks, Paul

    Read the article

  • Running a home mail server using dynamic dns [closed]

    - by Anand
    Hi, Is it possible to run an email server on my home box using dynamic dns? The scenario is, I want to auto cc all incoming and outgoing emails from my one account to another, from some server side config instead of configuring email clients for rules. I have tried Google Apps Mail but it doesn't allow auto cc of outgoing emails. After having read tons of blogs, forum messages etc (hope I have been reading the correct info :) ) the only option to achieve what I am needing is to setup my own mail server, but the cost of getting a static IP doesn't fit my budget. Please can someone point me in the correct direction. Platform doesn't matter, I can setup a Windows or Linux server. Many Thanks

    Read the article

  • Print Preview Blank IE8

    - by Ben
    On a Windows XP, in IE8 print preview always appears completely blank except for header information. I can open the generated temp file in firefox and print it from there. I have tried browsing without addons to no success. I have tried re-creating the "%TEMP%\low" folder as described on the web, e.g. here: http://answers.microsoft.com/en-us/ie/forum/ie8-windows_xp/ie8-printing-does-not-work-preview-empty/920588e5-ccc4-4e24-83d6-606d5e3b1c70 ... all with no success.

    Read the article

  • Servicing a WIM image with the recently released SP1 for Windows 7/Server 2008 R2

    - by noonand
    Hello, I normally hang out over on SO but wanted to ask this question in a more appropriate forum. I have, for the sheer fun of learning how to do (as I'm sick of GHOST and dd images) set up WDS and captured a reference WIM file. One of the things that I remember being promised was the ability to do offline servicing of WIM files. I'm just wondering what the actual procedure is for this? I have the full SP1 ISO down (covers 7 and 2008R2) and was wondering about next steps. If someone could point me in the right direction I'd appreciate it greatly. Thanks - Derek

    Read the article

  • Windows 7 stopped connecting to samba share

    - by Jan
    I have a problem with Windows 7 Home connecting to samba on linux server. It's worked fine for a year and without any changes in configuration or updates it suddenly stopped working. The strangest thing for me is that it stopped working for no reason that I could think of. After a few minutes after trying to connect I get: \\ip is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. Other computers in that network (XP machines) connect to samba without any problem. I've tried adding LmCompatibilityLevel as described here: http://www.tomshardware.com/forum/75-63-windows-samba-issue , but it didn't help.

    Read the article

  • PHP file gets download instead of getting executed when browsed in any browser

    - by baltusaj
    I have a phpinfo.php file which I am trying to run by browsing to it using browser but the browser downloads the file instead of executing it. phpinfo.php <?php phpinfo(); ?> I followed following this post, added following lines to my /etc/apache2/httpd.conf and restarted apache but invain. phpinfo.php still gets downloaded. AddType application/x-httpd-php .php .phtml AddType application/x-httpd-php-source .phps Have I added these line to the correct file? On an openSuSE forum following was mentioned. I followed this too but still no success. Same problem is persisting. In case the browser wants to save your php files instead of displaying the content, you should enable php support in the /etc/apache2/mod_userdir.conf file. Add the following line to it, just after the line and restart the server. Include /etc/apache2/conf.d/php5.conf

    Read the article

  • How to create multiple OS on same DVD [duplicate]

    - by learner
    This question already has an answer here: How to make a multiboot CD that will start a user-chosen ISO file 7 answers I searched this forum but there are only general answers which doesn't give me desired output. Here is what I want to do. I have (1). Windows 7 ISO (2). Windows 8.1 previews ISO and (3). Ubuntu 12.10 ISO files. Using which I want to create single bootable DVD, so that after creating DVD it should ask to choose to install between 3 OS. Is it possible? If so please help me.

    Read the article

  • "This file can't be previewed because of an error in the Microsoft Word previewer."

    - by danielson
    The issue is: Outlook 2013 simply will not give a preview of Word (nor Excel) docs in attachments. Never had the issue with Outlook 2010. Using Outlook 2013 on Windows 7 64bit SSD with Word 2010. I did notice that "Microsoft Word" is not listed specifically in Trust Center attachment handling, could that be part of the problem? Excel, Visio, RTF and many more are there. Update: strange, search can be performed in Word attachments... but can't preview Word file. So, Outlook can 'see' Word docs but won't let us have that preview. For reference, here is a similar question I posted in the Microsoft Answers forum.

    Read the article

  • 'DNS server isn't responding' error in windows 7 home premium

    - by pradeeptp
    Hi All, I bought a brand new Dell Studio 1558 just last week. It has windows 7 home premium 64-bit installed on it. My friend who is occupying the adjacent room has a laptop with windows XP. Both of us are connecting to the same wireless router of the hotel. My friend is able to connect to the wireless network without any trouble, but when I try to connect, I get the error "DNS service isn't responding". I get this error when I run the troubleshooting option. I met two more people in the same hotel with win XP laptop and they too dont have any problem. I have gone to possibly all the forums and website but I haven't been able to fix this error :(. I have done all the basic troubleshooting but I have no luck yet. Pls help. Following is one forum where the problem seem to have been trouble shooted but not for all. http://social.technet.microsoft.com/Forums/en/w7itpronetworking/thread/eeb84518-903d-46d1-9398-80cf211878d7

    Read the article

  • Why is my Asus P5PL2-E using 640MB of RAM (out of 4GB) ? [closed]

    - by Tom
    Possible Duplicate: Windows XP and RAM 3.5GB+ I've recently installed 4GB of RAM on my server, which is running Windows XP SP2 32-bit and My Computer showed that only 3.37GB were installed. After digging Google for a bit, I couldn't find anything helpful, but I do remember reading a post in a forum regarding the motherboard using 640MB of RAM. Digging in my own BIOS, I've also found that my motherboard has also reserved that amount for its self. Why does my motherboard reserve this memory and how can I tune it down to say 128MB?

    Read the article

  • iPhone always assigned wrong ip

    - by Ashley Ray
    for some reason most of the time my iPhone connects to the home network the ip address seems wrongly assigned as it 'loses connection' even even with strong reception. If I change the ip address to a static from 168.2.10 to 168.2.15 works fine until it appears to renew back to the prior. I am using a power-plug extender from the modem to router. Then have a laptop Printer playstation tv and another iPhone that always connect fine. The modem also has a crappy wireless which I haven't connected any devices to. I'm sure the forum will have a simple answer!

    Read the article

  • Will I experience problems running a Corsair Force GT SSD in IDE mode?

    - by Ian
    I'm planning to buy the Corsair Force GT 120GB (CSSD-F120GBGT-BK) and I'm planning to use it with an older motherboard that doesn't support AHCI (ASUS P5K SE). Will I experience any problems when running this SSD in IDE mode? A slight performance drop is acceptable. EDIT See my answer below. Conclusion: It works great. Follow the discussion here: http://forum.corsair.com/v3/showthread.php?p=570829#post570829 So far so good. Running Corsair Force GT 120GB (using FW1.3.3) on IDE. No BSOD/Freeze whatsoever. Here are my atto benchmark results:

    Read the article

  • mount dev, proc, sys in a chroot environment?

    - by Patrick
    I'm trying to create a Linux image with custom picked packages. I followed the guide here http://www.olpcnews.com/forum/index.php?topic=4766.0 However, when I tried to install some packages, it failed to configure due to missing the proc, sys, dev directories. So, I learned from other places that I need to "mount" the host proc, ... directories to my chroot environment. Though, I saw two syntax and am not sure which one to use. In host machine: mount --bind /proc <chroot dir>/proc and another syntax (in chroot envrionment): mount -t proc none /proc Which one should I use, and what are the difference? Edit: What I'm trying to do is to hand craft the packages I'm going to use on an XO laptop, because compiling packages takes really long time on the real XO hardware, if I can build all the packages I need and just flash the image to the XO, I can save time and space.

    Read the article

  • Looking for a good Web Server that is cheap

    - by SoLoGHoST
    I am a Project Manager, and former Lead Developer for a software portal system that requires a forum software to run. I am in need of a server that is cheap, reliable, and supports the latest PHP (5.2+), MySQL, unlimited e-mails (preferably), a cPanel, multiple sub-domains (atleast 3+). Currently I am paying $34.95 USD/month (approx. $420 USD/year). This is too high for me to pay to keep the site running. I just recently became Project Manager and in charge of Finances and I'm extremely concerned for the future of Dream Portal. With those prices I'm not sure I'll be able to keep it running for too long. Can someone please tell me of a good server that meets all of the requirements that I listed above that is cheaper on a yearly basis? Note: Currently on a Dedicated Server with limited disk space at 15000 MB (15 GB), monthly bandwidth = 500000 MB, 50 emails limit, 20 sub-domains limit, 30 FTP accts., and 25 SQL Databases.

    Read the article

  • Thunderbird 3.1.7 file system and file extensions

    - by Sharon Bode
    I have lost all email messages and folders in my Thunderbird program. Where can I look for them? The messages were organized in folders for several years. My system is Windows XP. I have looked in the Thunderbird Profiles default profile folder. I can see Inbox and Trash but none of the other folders I have set up are visible. I cannot directly open Inbox or Trash so I don't know if my lost messages are in these folders. Others in the Community Forum seem to have the same problem but no one has answered them or me. Is there someone in this community who can help? Thank you, Sharon Bode

    Read the article

  • install bluetooth in samsung R430, windows 7

    - by voodoomsr
    how can i install the bluetooth driver in this laptop in windows 7. The installation process tells me that i need to activate the bluetooth device to continue, but how can i activate if till that moment the device doesn't exist. There isn't any button or switch to activate the device manually. Edited: it's the np-r430 model. I read somewhere (a users forum, not official info) that for Chile and Argentina this models doesn't have built in the bluetooth device, but the US models have it. Maybe for some political and weird reason they send to south american laptops without that. The link of my notebook's specifications in an AR domain: np-r40

    Read the article

  • Sound problems in Windows 7

    - by Plastkort
    hi! I hope I reached the correct forum for this question. I have a media computer with a third party audio card (Soundblaster audigy SE) I use a coaxial digital audio cable connected to a Onkyo TX SR508. if I use normal audio, the sound seems very low, I have to set volume atleast to 62 in my amplifier to hear anything, however if I set digital SPDIF I have no means of controlling the audio volume from the PC (only from the amplifier) and this can be nasty if I toggle between movies that uses Digital AC3/THX and movies wihtouth, if I look at movies capable of AC3 the volume gets VERY loud if amp is set to 62, 32 is more than enough volume when using passthrough. so this bothers me is how can I get the same amount of volume with or without digital output? I tried also other soundcards, internal red light Digital audio cable... if I connect to my television I get ok sound on any sound source via HDMI... help :)

    Read the article

  • LGA 1155 or LGA 2011? Which has a brighter future?

    - by Langdon
    I'd basically like to rehash this question, only 22 months later. The last system I built was in 2006, shortly after AMD came out with socket AM2. I was able to upgrade the processor on it 3 times and would love to do the same with my next computer. Since AMD seems to be lagging, I'm going for Intel this time. I've read that Intel changes chip sets all the time, so there's no safe bet. I also read (1 comment on 1 forum) that said LGA 2011 will have 8-core support, but LGA 1155 won't, which leads me to believe that LGA 2011 might be a better choice. Anyone have any good advice for me?

    Read the article

  • Unable to copy multiple files from remote sftp via ssh

    - by Kevin S
    I am trying to copy multiple (1000s) .JPG files from remote SFTP server to current server using mget command but it is not working. Here is the command that I used sftp [email protected] sftp> cd /images sftp> mget *.JPG Screenshot at http://i.stack.imgur.com/bSciQ.png Nothing happens so when I do CTRL + C it gives an error that says File "/images/*.JPG" not found. I have already referred all suggestions posted on the forum but nothing is working. Let me know if there is another way to copy.

    Read the article

  • Fixing restore active desktop on windows xp

    - by Rachel Nark
    I've already tried this: http://answers.microsoft.com/en-us/windows/forum/windows_xp-desktop/windows-xp-will-not-restore-my-active-desktop/f664bfe4-0acd-4b11-8918-eb779bb2cc07 had no luck. All I know is that the computer crashed from a power outage. I've tried clicking the restore button and rebooting. Nothing. What else is there to try? Would like to have the desktop back. It powers on fine. I can login and use windows just fine. Just you get that annoying restore active desktop screen.

    Read the article

  • CentOS VM, NTP synchronization problems

    - by Spirit
    We have three CentOS 5.9 VMs on an ESX3.5 host. Because of the nature of the services we provide it is required that the NTP time is synchronized and the time is correct on all three of them. However one of them constantly drifts back each day for about 66 sec. So far none of us seems to understand as why is this happening. We included the possibility that the VM may be somehow pulling the time from the host, however all of the three VMs have identical configuration settings and they did not have VMware tools installed. Although I realize that this is probably a question of an internal matter and not to ask for on a forum, I would appreciate if anyone of you knows some CentOS NTP diagnostic routines that will help me to diagnose the problem and find a reliable solution. I thank you for the assistance.

    Read the article

  • Citrix and WPF, blue window

    - by Ian
    We are building WPF applications which will be deployed on Citrix. Currently you simply see a blue window under Citrix, although the app runs fine on the server itself. There do seem to be some issues detailed on the net. Citrix forum discussion Microsoft hot fix We've applied the hot fix but this does not appear to fix the problem for us at least. Also, found this identical question on this site, but it had been removed by the author, so no answers. I'm running citrix 4.5 on a Windows 2003 server. I am trying to publish a WPF app (any WPF app has this problem) and all I get is a blue rectangle where the app is supposed to be. The rectangle is the exact size and shape of the window I expect, but it is just blue (looks like the color of the citrix desktop background). Any ideas?

    Read the article

< Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >