Search Results

Search found 11077 results on 444 pages for 'ip'.

Page 75/444 | < Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >

• IBM Tivoli Network Manager IP Edition - Job does not run

  - by Thorsten Niehues

  Since our network discovery takes too long I tried to split the biggest job into two parts. The two parts use the same Perl script but have a different scope. I copied a Job (Agent) doing the following: Copied the .agnt file Copied the associated perl script The problem is that one or the other job (changes randomly) does not run. The Disco Process will fail eventually. In the log of the job which does not run I see the following error message: Wed Jul 18 08:48:54 2012 Warning: Failed to send on transport layer found in file CRivObjSockClient.cc at line 1293 - Client My_MacTable_Cis is not connected to service Helper How do I fix this problem?

  Read the article

• TCP/IP Ilustrated 1 second edition [on hold]

  - by user196821

  Well, I want to read and learn about how tcpip works in detail, so I got a copy of the well known book of Richard Stevens. But after a little, I discovered there is a second edition of the book, so I checked it out. But surprisingly, the second edition does not cover some subjects that the first actually does (like telnet, ftp, smtp etc...), so I thought "well I just have to read the misshing chapters on the first edition", but if they removed them in the second, it is for a reason. Is there really a good reason for that?

  Read the article

• How to add an iptables rule with source IP address

  - by ???

  I have a bash script that starts with this: if [[ $EUID -ne 0 ]]; then echo "Permission denied (are you root?)." exit 1 elif [ $# -ne 1 ] then echo "Usage: install-nfs-server <client network/CIDR>" echo "$ bash install-nfs-server 192.168.1.1/24" exit 2 fi; I then try to add the iptables rules for NFS as follows: iptables -A INPUT -i eth0 -p tcp -s $1 --dport 111 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --sport 111 -m state --state ESTABLISHED -j ACCEPT iptables -A INPUT -i eth0 -p udp -s $1 --dport 111 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p udp --sport 111 -m state --state ESTABLISHED -j ACCEPT service iptables save service iptables restart I get the error: Try iptables -h' or 'iptables --help' for more information. Bad argument111' Try iptables -h' or 'iptables --help' for more information. Bad argument111' Saving firewall rules to /etc/sysconfig/iptables: ^[[60G[^[[0;32m OK ^[[0;39m]^M Flushing firewall rules: ^[[60G[^[[0;32m OK ^[[0;39m]^M Setting chains to policy ACCEPT: filter ^[[60G[^[[0;32m OK ^[[0;39m]^M Unloading iptables modules: ^[[60G[^[[0;32m OK ^[[0;39m]^M Applying iptables firewall rules: ^[[60G[^[[0;32m OK ^[[0;39m]^M Loading additional iptables modules: ip_conntrack_netbios_ns ^[[60G[^[[0;32m OK ^[[0;39m]^M When I open /etc/sysconfig/iptables these are the rules: # Generated by iptables-save v1.3.5 on Mon Mar 26 08:00:42 2012 *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [466:54208] :RH-Firewall-1-INPUT - [0:0] -A INPUT -j RH-Firewall-1-INPUT -A FORWARD -j RH-Firewall-1-INPUT -A OUTPUT -o eth0 -p tcp -m tcp --sport 111 -m state --state ESTABLISHED -j ACCEPT -A OUTPUT -o eth0 -p udp -m udp --sport 111 -m state --state ESTABLISHED -j ACCEPT -A OUTPUT -o eth0 -p tcp -m tcp --sport 111 -m state --state ESTABLISHED -j ACCEPT -A OUTPUT -o eth0 -p udp -m udp --sport 111 -m state --state ESTABLISHED -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 111 -j ACCEPT -A RH-Firewall-1-INPUT -p udp -m state --state NEW -m udp --dport 111 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 111 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 111 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 111 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 111 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 111 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 111 -j ACCEPT -A RH-Firewall-1-INPUT -i lo -j ACCEPT -A RH-Firewall-1-INPUT -p icmp -m icmp --icmp-type any -j ACCEPT -A RH-Firewall-1-INPUT -p esp -j ACCEPT -A RH-Firewall-1-INPUT -p ah -j ACCEPT -A RH-Firewall-1-INPUT -d 224.0.0.251 -p udp -m udp --dport 5353 -j ACCEPT -A RH-Firewall-1-INPUT -p udp -m udp --dport 631 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m tcp --dport 631 -j ACCEPT -A RH-Firewall-1-INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 22 -j ACCEPT -A RH-Firewall-1-INPUT -j REJECT --reject-with icmp-host-prohibited COMMIT # Completed on Mon Mar 26 08:00:42 2012 ~ "/etc/sysconfig/iptables" 32L, 1872C I've also tried: iptables -I RH-Firewall-1-INPUT 1 -m state --state NEW -m tcp -p tcp --source $1 --dport 111 -j ACCEPT iptables -I RH-Firewall-1-INPUT 2 -m udp -p udp --source $1 --dport 111 -j ACCEPT

  Read the article

• Using a Blackberry Bold as an IP Modem on Windows 7

  - by Lawrence

  I recently installed Windows 7 and now cannot use my Blackberry Bold as a modem (via a USB cable): When I query the modem it is successful. I have added the correct "at" commands. When I try connect it says "connecting modems" but then it times out with the following error: Error 638: The remote server is not responding in a timely fashion. I also have the latest desktop manager software installed.

  Read the article

• Can not change to a static IP in Fedora 19

  - by user196272

  Im having a bit of a weird situation. Ive installed Fedora Linux 19 onto a virtual machine with no GUI. initially eth0 does not show up when I perform ifconfig. when I run dmesg | grep eth I see the adapter but it says it changed names to p2p1. Once I perform the ifconfig p2p1 up command it shows up. Now when I try to edit the /etc/sysconfig/network-scripts/ifcfg-p2p1, it does not exist. the only scripts that are there lo and enp0s3. If I try to create the ifcfg-p2p1 file with the correct settings, I can not restart the network service. I tried editing the enp0s3 file, but that did not work. Im fairly new to linux and not sure what else to put in here, so if you need any more information just let me know and Ill put it in here.

  Read the article

• TCP/IP Forwarding in Windows Vista and Above

  - by Charles Gargent

  This is the way to do it on XP, but is it possible on Windows Vista and Above? If so how do you detect it? Is there a registry setting for it, or is there com dll or api for it?

  Read the article

• Considerations for a business looking to transition from PSTN to IP Telephony

  - by Bryce Thomas

  Full disclosure - This is related to a homework assignment question. I am not asking you to do my work for me, I am merely looking for some pointers and considerations to direct me in my further research. I have an assignment I'm working on where I've been given a scenario where a business wants to look into transitioning to using "Internet Telephone" as opposed to a traditional PSTN/PBX system and I need to write a report on it. I'm after some high level pointers from people, especially anyone that has been involved in a real life transition of this nature, on what some of the most important considerations are. These can be financial considerations, initial setup considerations, ongoing administrative considerations, quality of service considerations or anything else that is pertinent to performing such a transition.

  Read the article

• VoIP - need setup ip network with our SIP operator

  - by evgeniy.labusnkiy

  Need to make next one: for ex i'm now in UAE, but i need to make a call to my girlfriend who is in Ukraine. I need to find the way how can i make the connection to my home router and make the call from VoIP gateway using my standard phone network in Ukraine. I have some imagination about this, to do like this: Connect to router or VoIP gateway (how? soft?) using inet - Gateway make a call using standard phone line in my country. Any ideas? Best practice? What devices i need to make this? Pay attention that i don't want to use any SIP providers. Thats a lot!

  Read the article

• Centos does not open port/s after the rule/s are appended

  - by Charlie Dyason

  So after some battling and struggling with the firewall, i see that I may be doing something or the firewall isnt responding correctly there is has a port filter that is blocking certain ports. by the way, I have combed the internet, posted on forums, done almost everything and now hence the website name "serverfault", is my last resort, I need help What I hoped to achieve is create a pptp server to connect to with windows/linux clients UPDATED @ bottom Okay, here is what I did: I made some changes to my iptables file, giving me endless issues and so I restored the iptables.old file contents of iptables.old: # Firewall configuration written by system-config-firewall # Manual customization of this file is not recommended. *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT -A INPUT -j REJECT --reject-with icmp-host-prohibited -A FORWARD -j REJECT --reject-with icmp-host-prohibited COMMIT after iptables.old restore(back to stock), nmap scan shows: nmap [server ip] Starting Nmap 6.00 ( nmap.org ) at 2013-11-01 13:54 SAST Nmap scan report for server.address.net ([server ip]) Host is up (0.014s latency). Not shown: 997 filtered ports PORT STATE SERVICE 22/tcp open ssh 113/tcp closed ident 8008/tcp open http Nmap done: 1 IP address (1 host up) scanned in 4.95 seconds if I append rule: (to accept all tcp ports incoming to server on interface eth0) iptables -A INPUT -i eth0 -m tcp -j ACCEPT nmap output: nmap [server ip] Starting Nmap 6.00 ( nmap.org ) at 2013-11-01 13:58 SAST Nmap scan report for server.address.net ([server ip]) Host is up (0.017s latency). Not shown: 858 filtered ports, 139 closed ports PORT STATE SERVICE 22/tcp open ssh 443/tcp open https 8008/tcp open http Nmap done: 1 IP address (1 host up) scanned in 3.77 seconds *notice it allows and opens port 443 but no other ports, and it removes port 113...? removing previous rule and if I append rule: (allow and open port 80 incoming to server on interface eth0) iptables -A INPUT -i eth0 -m tcp -p tcp --dport 80 -j ACCEPT nmap output: nmap [server ip] Starting Nmap 6.00 ( nmap.org ) at 2013-11-01 14:01 SAST Nmap scan report for server.address.net ([server ip]) Host is up (0.014s latency). Not shown: 996 filtered ports PORT STATE SERVICE 22/tcp open ssh 80/tcp closed http 113/tcp closed ident 8008/tcp open http Nmap done: 1 IP address (1 host up) scanned in 5.12 seconds *notice it removes port 443 and allows 80 but is closed without removing previous rule and if I append rule: (allow and open port 1723 incoming to server on interface eth0) iptables -A INPUT -i eth0 -m tcp -p tcp --dport 1723 -j ACCEPT nmap output: nmap [server ip] Starting Nmap 6.00 ( nmap.org ) at 2013-11-01 14:05 SAST Nmap scan report for server.address.net ([server ip]) Host is up (0.015s latency). Not shown: 996 filtered ports PORT STATE SERVICE 22/tcp open ssh 80/tcp closed http 113/tcp closed ident 8008/tcp open http Nmap done: 1 IP address (1 host up) scanned in 5.16 seconds *notice no change in ports opened or closed??? after removing rules: iptables -A INPUT -i eth0 -m tcp -p tcp --dport 80 -j ACCEPT iptables -A INPUT -i eth0 -m tcp -p tcp --dport 1723 -j ACCEPT nmap output: nmap [server ip] Starting Nmap 6.00 ( nmap.org ) at 2013-11-01 14:07 SAST Nmap scan report for server.address.net ([server ip]) Host is up (0.015s latency). Not shown: 998 filtered ports PORT STATE SERVICE 22/tcp open ssh 113/tcp closed ident Nmap done: 1 IP address (1 host up) scanned in 5.15 seconds and returning rule: (to accept all tcp ports incoming to server on interface eth0) iptables -A INPUT -i eth0 -m tcp -j ACCEPT nmap output: nmap [server ip] Starting Nmap 6.00 ( nmap.org ) at 2013-11-01 14:07 SAST Nmap scan report for server.address.net ([server ip]) Host is up (0.017s latency). Not shown: 858 filtered ports, 139 closed ports PORT STATE SERVICE 22/tcp open ssh 443/tcp open https 8008/tcp open http Nmap done: 1 IP address (1 host up) scanned in 3.87 seconds notice the eth0 changes the 999 filtered ports to 858 filtered ports, 139 closed ports QUESTION: why cant I allow and/or open a specific port, eg. I want to allow and open port 443, it doesnt allow it, or even 1723 for pptp, why am I not able to??? sorry for the layout, the editor was give issues (aswell... sigh) UPDATE @Madhatter comment #1 thank you madhatter in my iptables file: # Firewall configuration written by system-config-firewall # Manual customization of this file is not recommended. *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -i eth0 -j ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT # ----------all rules mentioned in post where added here ONLY!!!---------- -A INPUT -j REJECT --reject-with icmp-host-prohibited -A FORWARD -j REJECT --reject-with icmp-host-prohibited COMMIT if I want to allow and open port 1723 (or edit iptables to allow a pptp connection from remote pc), what changes would I make? (please bear with me, my first time working with servers, etc.) Update MadHatter comment #2 iptables -L -n -v --line-numbers Chain INPUT (policy ACCEPT 0 packets, 0 bytes) num pkts bytes target prot opt in out source destination 1 9 660 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 2 0 0 ACCEPT icmp -- * * 0.0.0.0/0 0.0.0.0/0 3 0 0 ACCEPT all -- eth0 * 0.0.0.0/0 0.0.0.0/0 4 0 0 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 5 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:22 6 0 0 REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-host-prohibited Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) num pkts bytes target prot opt in out source destination 1 0 0 REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-host-prohibited Chain OUTPUT (policy ACCEPT 6 packets, 840 bytes) num pkts bytes target prot opt in out source destination just on a personal note, madhatter, thank you for the support , I really appreciate it! UPDATE MadHatter comment #3 here are the interfaces ifconfig eth0 Link encap:Ethernet HWaddr 00:1D:D8:B7:1F:DC inet addr:[server ip] Bcast:[server ip x.x.x].255 Mask:255.255.255.0 inet6 addr: fe80::21d:d8ff:feb7:1fdc/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:36692 errors:0 dropped:0 overruns:0 frame:0 TX packets:4247 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2830372 (2.6 MiB) TX bytes:427976 (417.9 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.8.0.1 P-t-P:10.8.0.2 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) remote nmap nmap -p 1723 [server ip] Starting Nmap 6.00 ( http://nmap.org ) at 2013-11-01 16:17 SAST Nmap scan report for server.address.net ([server ip]) Host is up (0.017s latency). PORT STATE SERVICE 1723/tcp filtered pptp Nmap done: 1 IP address (1 host up) scanned in 0.51 seconds local nmap nmap -p 1723 localhost Starting Nmap 5.51 ( http://nmap.org ) at 2013-11-01 16:19 SAST Nmap scan report for localhost (127.0.0.1) Host is up (0.000058s latency). Other addresses for localhost (not scanned): 127.0.0.1 PORT STATE SERVICE 1723/tcp open pptp Nmap done: 1 IP address (1 host up) scanned in 0.11 seconds UPDATE MadHatter COMMENT POST #4 I apologize, if there might have been any confusion, i did have the rule appended: (only after 3rd post) iptables -A INPUT -p tcp --dport 1723 -j ACCEPT netstat -apn|grep -w 1723 tcp 0 0 0.0.0.0:1723 0.0.0.0:* LISTEN 1142/pptpd There are not VPN's and firewalls between the server and "me" UPDATE MadHatter comment #5 So here is an intersting turn of events: I booted into windows 7, created a vpn connection, went through the verfication username & pword - checking the sstp then checking pptp (went through that very quickly which meeans there is no problem), but on teh verfication of username and pword (before registering pc on network), it got stuck, gave this error Connection failed with error 2147943625 The remote computer refused the network connection netstat -apn | grep -w 1723 before connecting: netstat -apn |grep -w 1723 tcp 0 0 0.0.0.0:1723 0.0.0.0:* LISTEN 1137/pptpd after the error came tried again: netstat -apn |grep -w 1723 tcp 0 0 0.0.0.0:1723 0.0.0.0:* LISTEN 1137/pptpd tcp 0 0 41.185.26.238:1723 41.13.212.47:49607 TIME_WAIT - I do not know what it means but seems like there is progress..., any thoughts???

  Read the article

• Redirect email based on Source IP / Hostname

  - by PostMan

  So, we have a situation where we would like to be able to redirect (ignoring original destination) emails coming through out exchange server (locally sent) to a different email address. The situation is as follows: Testing a new server, this hosts a lot of our custom applications / scheduled tasks (as does the production version of this server). Instead of changing config files / parameters for these applications we'd rather leave them as they are, as we want to be as close to production as possible, however we don't want the emails go to the staff they would normally go to, we'd rather they were sent to a test email address where we are able to confirm the results. The emails look exactly like the production emails (same from / to / cc / bcc) except their source, hence why we'd like to know if the ability to redirect based on hostname exists. Cheers.

  Read the article

• TCP/IP & throughput between FreeNAS (BSD) server & other LAN machines

  - by Tim Dickerson

  I have got a question for someone that knows BSD a bit better than me that are in regards to my LAN setup at home/work here outside Chicago. I can't seem to fully optimize my network's (LAN) thoughput via my FreeNAS (BSD based) file server. It runs with the latest FreeBSD release which is modified to support several protocols for file transfers and more. Every machine that is behind my Smoothwall (Linux based) router is on the usual 192.168.0.x subnet and for most part works just fine. Behind the Smoothwall box, all machines are connected to a GB HP unmanaged switch. I host a large WISP here and have an OC-3 connection here at home/work and have no issues with downloading/uploading from/to the 'net'. My problem is with throughput. When I try and transfer large files...really any for that matter..between any of the machines to/and from the FreeNAS server via FTP, the max throughput I can achieve say between a Win 7 or a Linux box is ~65Mbit/sec. All machines are running Intel Pro 1000 GB NIC's and all cable is CAT6. Each is set to 'auto negotiation' and each shows 1500 MTU Full Duplex @1GB so I know the hardware is okay. I have not adjusted the MTU on any machine as I understand it to be pointless unless certain configurations are used (I assume I am not one of those). My settings for the FreeNAS machine are the following: # FreeNAS /etc/sysctl.conf - pertinent settings shown kern.ipc.maxsockbuf=262144 kern.ipc.nmbclusters=32768 kern.ipc.somaxconn=8192 kern.maxfiles=65536 kern.maxfilesperproc=32768 net.inet.tcp.delayed_ack=0 net.inet.tcp.inflight.enable=0 net.inet.tcp.path_mtu_discovery=0 net.inet.tcp.recvbuf_auto=1 net.inet.tcp.recvbuf_inc=524288 net.inet.tcp.recvbuf_max=16777216 net.inet.tcp.recvspace=65536 net.inet.tcp.rfc1323=1 net.inet.tcp.sendbuf_inc=16384 net.inet.tcp.sendbuf_max=16777216 net.inet.tcp.sendspace=65536 net.inet.udp.recvspace=65536 net.local.stream.recvspace=65536 net.local.stream.sendspace=65536 net.inet.tcp.hostcache.expire=1 From what I can tell, that looks to be a somewhat optimized profile for a typical BSD machine acting as a server for a LAN. I might be wrong and just wanted to find out from someone that knows BSD better than I do if indeed that is ok or if something is out of tune or what. Are there other ways I would find better for P2P file transfers? I honestly do not know what I SHOULD be looking for with respect to throughput between the NAS box and another client when xferring files via FTP, but I am told that what I get on average (40-70MB/sec) is too low for what it could be. I have thought about adding another NIC in the FreeNAS box as well as the Win7 machine and use a X-over cable via a static route, but wanted to check with someone first to see if that might be worth it or not. I don't know if doing that would bypass the HP GB switch and allow for a machine to machine xfer anyways. The FTP client I use is: Filezilla and have tried both active and passive modes with no real gain over each other. The NAS box runs ProFTPD.

  Read the article

• Rewrite URL based off of IP on OpenWRT

  - by Scott

  We are running OpenWRT on a WRT54GL. I have been looking for an answer to this, but I can't seem to figure out what to search for, if its possible, or what combination of programs to use. I want to be able to redirect a HTTP request from a WiFi device based off of their MAC address. This should all be transparent to the device. Basically we are trying to redirect any non-registered devices to a website to register the device (at this point, we would push a new config to the router that would allow this MAC address "full access"). Once a device is registered, it will be redirected to a transparent squid proxy server on another machine for caching/blocking certain sites. I looked at tinyproxy - popilo which redirects but I won't have the MAC address to know if its registered or not. Any help (google suggestions, programs, anything!) would be very much appreciated!

  Read the article

• centos TCP/IP connection very slow

  - by yuli chika

  I have a VSP (centos6.1 64bit) with 4gb ram. It always runs well, but in recent few days, the server become slowly. open a small css file need 22 seconds(2kb). tested in home/office/phone with (IE,chrome,safari,firefox). see in firebug networking DNS Lookup ?4?ms Connecting ?21.18?s Sending 1?ms Waiting ?115?ms Receiving ?9?ms The connection cost 21.18 seconds I have checked all the log file, there have no error. top commond, still have free memory. top - 00:23:15 up 8 days, 3:57, 1 user, load average: 3.60, 3.42, 3.83 Tasks: 221 total, 4 running, 217 sleeping, 0 stopped, 0 zombie Cpu(s): 19.3%us, 3.2%sy, 0.0%ni, 76.1%id, 1.4%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 4194304k total, 3247724k used, 946580k free, 0k buffers Swap: 0k total, 0k used, 0k free, 0k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 32357 mysql 15 0 3710m 835m 6268 S 34.5 20.4 39:14.40 mysqld 9780 apache 15 0 442m 59m 12m S 33.2 1.4 0:05.69 httpd 9842 apache 15 0 403m 26m 10m S 16.9 0.7 0:01.23 httpd 9847 apache 15 0 412m 45m 22m R 15.3 1.1 0:01.00 httpd 9834 apache 15 0 426m 46m 11m R 13.0 1.1 0:02.22 httpd 9891 apache 15 0 407m 43m 19m S 8.0 1.1 0:00.33 httpd 9845 apache 15 0 414m 51m 24m S 6.0 1.3 0:01.53 httpd 9827 apache 15 0 402m 28m 11m S 3.3 0.7 0:02.69 httpd 9768 apache 16 0 414m 51m 24m S 3.0 1.3 0:06.51 httpd 9889 root 15 0 211m 12m 8160 S 2.7 0.3 0:00.32 php 9702 apache 15 0 415m 55m 26m S 1.7 1.4 0:10.67 httpd 9844 apache 15 0 413m 47m 21m S 1.7 1.2 0:01.21 httpd 9697 apache 15 0 414m 51m 24m S 1.3 1.3 0:11.05 httpd 9778 apache 15 0 414m 53m 25m S 1.3 1.3 0:05.38 httpd 9772 apache 15 0 414m 51m 23m R 0.7 1.3 0:05.04 httpd 9823 apache 15 0 415m 50m 23m S 0.7 1.2 0:03.97 httpd 9837 apache 15 0 402m 27m 11m S 0.3 0.7 0:01.04 httpd Then, how to check where is the problem and fixed it? I haven't change and config files in these days. Thanks.

  Read the article

• Apache /folder redirect to different IP

  - by Physikal

  We have a site, www.domain.net running on xxx.xxx.xxx.1, we would like to have a folder/alias of www.domain.net/time redirect to the root of a site at xxx.xxx.xxx.2. How would you do this with apache directives? Examples would be awesome. Or guides. Thank you very much in advance.

  Read the article

• monitoring TCP/IP performance on Solaris

  - by Andy Faibishenko

  I am trying to tune a high message traffic system running on Solaris. The architecture is a large number (600) of clients which connect via TCP to a big Solaris server and then send/receive relatively small messages (.5 to 1K payload) at high rates. The goal is to minimize the latency of each message processed. I suspect that the TCP stack of the server is getting overwhelmed by all the traffic. What are some commands/metrics that I can use to confirm this, and in case this is true, what is the best way to alleviate this bottleneck?

  Read the article

• Very long (>300s) request processing time on Apache Server serving static content from particular IP

  - by Ron Bieber

  We are running an Apache 2.2 server for a very large web site. Over the past few months we have been having some users reporting slow response times, while others (including our resources, both on the internal network and our home networks) do not see any degradation in performance. After a ton of investigation, we finally found a "Deny from none" statement in our configuration that was causing reverse DNS lookups (which were timing out) that solved the bulk of our issues, but we still have some customers that we are seeing in the Apache logs (using %D in the log format) with request processing times of 300s for images, css, javascript and other static content. We've checked all Deny / Allow statements for reoccurrence of "none", as well as all other things we know of that would cause reverse DNS lookups (such as using "REMOTE_HOST" in rewrite rules, using %a instead of %h in our log format configuration) as well as verified that HostnameLookups is set to "Off". As an aside, we've also validated that reverse DNS lookups for folks having this problem do not time out - so I'm fairly certain DNS is not an issue in this case. I've run out of ideas. Are there any Apache configuration scenarios that someone can point me to that I might be missing that would cause request times for static content to take so long only for certain users? Thank you in advance.

  Read the article

• Specific IP routing for VPN

  - by Roy

  Is there a way that I can prevent an entire subnet from using internal routing. The VPN server is supposed to be a way to access the company's intranet websites for some people, while for others it is supposed to do routing to the outside only and therefore not having access to any internal websites. The VPN server has a DNS on the actual server but not all should be using this DNS. Some of the users should be directly sent out of the server to the internet. Example: 10.0.0.1 is the DNS on the server, gateway for the VPN 10.0.0.2 is a user (A) on the VPN having access to the intranet websites (subnet is 10.0.0.0/25) 10.0.0.192 is a user (B) only needing routing and no access to intranet websites (subnet is 10.0.0.192/26) All traffic of user B should be directly rerouted out of the server. I have tried several iptables but without success.

  Read the article

• nginx 2 symfony2 web application, one ip no domain

  - by Krzysztof Koch

  I have irritating with nginx. I set up in /usr/share/nginx/www/firstapp one application and in /usr/share/nginx/www/secondapp. in my default conf i setup that in / root localization i want first app: when write 9.9.9.9 in browser show me first app, and when i write 9.9.9.9/makeup, there not show me seccond app. Why first app displays me good, and seccondapp cannot? Please help me. Sorry for quality here pasterbin code: enter link description here server { listen 80; server_name localhost; root /usr/share/nginx/www/firstapp/web; access_log /var/log/nginx/$host.access.log; error_log /var/log/nginx/error.log error; # strip app.php/ prefix if it is present rewrite ^/app\.php/?(.*)$ /$1 permanent; location / { root /usr/share/nginx/www/firstapp/web/; index app.php; try_files $uri @rewriteapp; } location /makeup/ { alias /usr/share/nginx/www/seccondapp/web/; index app.php; try_files $uri @rewriteapp; } location @rewriteapp { rewrite ^(.*)$ /app.php/$1 last; } # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 location ~ ^/(app|app_dev)\.php(/|$) { #fastcgi_pass 127.0.0.1:9000; fastcgi_pass unix:/var/lib/php5-fpm/www.sock; fastcgi_split_path_info ^(.+\.php)(/.*)$; include fastcgi_params; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_param HTTPS off; #fastcgi_param SERVER_PORT 80; }

  Read the article

• Debian 6 Internet connection sharing aka IP masquerade not working

  - by Rautamiekka

  The problem: the computers [Xbox 360 and a Kubuntu 12.04.1 laptop] can't access Internet through a recently-installed desktopless Debian 6 laptop (which is wirelessly connected to a WLAN station) but addresses are successfully given by dnsmasq. The attempts: 1.1) /etc/dnsmaq.conf conffed according to http://wiki.debian.org/HowTo/dnsmasq: add lines interface=eth0 dhcp-range=192.168.0.50,192.168.0.150,255.255.255.0,12h 1.2) Follow http://www.cyberciti.biz/faq/rhel-fedora-linux-internet-connection-sharing-howto/ and use their script to setup iptables. 2) Follow the Ubuntu Internet Gateway Method (iptables) at https://help.ubuntu.com/community/Internet/ConnectionSharing recommended and which worked at Share internet in Linux. The Debian laptop was rebooted many times and between each attempt, with and without the script auto-executing via /etc/rc.local. While adding the iptables-restore command to that file I disabled the script.

  Read the article

• Centos: multiple IP addresses

  - by ace

  I just bought 10 extra IPs from my host. How do I point these at my CentOS 5 server?

  Read the article

• Can I query DHCP server for getting mapping of MAC to IP address (I have admin rights)?

  - by Kazoom

  I need to know the MAC to IP address mapping stored on DHCP server. I don't want to use arp cache as that would require me to either broadcast ping (which is not allowed on windows) or ping the all possible ip address of subnet( which takes lot of time). I am sure that DHCP server stores the mapping of MAC to IP, how can i use that information, to map MAC to IP address?

  Read the article

• Multiple interfaces to one IP address?

  - by Delan Azabani

  At present, I have: a Netgear router with DHCP off at 192.168.0.1 my computer eth0 at 192.168.0.2 wlan0 at 192.168.0.2 The wlan0 interface always connects to the router, while the eth0 interface connects to other computers with crossover and acts as a dnsmasq DHCP server for network boot and installation. If I use the Gnome NetworkManager to enable both connections, that is, with wlan0 connected to the router/internet and eth0 to another computer, both as 192.168.0.2, I cannot access the internet while eth0 is connected. Why is this? How can I configure my computer to follow wlan0 for Internet usage, but use eth0 for itself (the latter is working but blocking wlan0).

  Read the article

• Unable to start sql service when TCP/IP is enabled under SSCM - SS Network Configuration

  - by ebel

  I get error 10048. and this in event history: The SQL server service terminated with server-specific error. Only one usage of each socket (protcol/network address/port) is normall permitted. Any idea howto fix this ? Port set is the default 1433... If this is turned off, which is default of course, SQL service starts like a champ. I have done this config many times on other servers with no problem.

  Read the article

• InstantSSL's certificate no different than a self signed certificate under Nginx with an IP accessed address

  - by Absolute0

  I ordered an ssl certificate from InstantSSL and got the following pair of files: my_ip.ca-bundle, my_ip.crt I also previously generated my own key and crt files using openssl. I concatenated all the crt files: cat my_previously_generted.crt my_ip.ca_bundle my_ip.crt chained.crt And configured nginx as follows: server { ... listen 443; ssl on; ssl_certificate /home/dmsf/csr/chained.crt; ssl_certificate_key /home/dmsf/csr/csr.nopass.key; ... } I don't have a domain name as per the clients request. When I open the browser with https://my_ip chrome gives me this error: The site's security certificate is not trusted! You attempted to reach my_ip, but the server presented a certificate issued by an entity that is not trusted by your computer's operating system. This may mean that the server has generated its own security credentials, which Google Chrome cannot rely on for identity information, or an attacker may be trying to intercept your communications. You should not proceed, especially if you have never seen this warning before for this site.

  Read the article

• vmware windows7 professional changing ip addresses

  - by chris hough

  is there a way to fix your windows 7 professional guest host os ipaddress so it does not change every time you startup? I am currently using NAT for networking and would like to remain using this networking method if possible. In older versions of windows this never used to be a problem in vmware so I am wondering if I am missing a setting in windows 7 professional or in vmware. thank you for your help, chris

  Read the article

< Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >