Search Results

Search found 22546 results on 902 pages for 'mode management'.

Page 752/902 | < Previous Page | 748 749 750 751 752 753 754 755 756 757 758 759  | Next Page >

• break Folder Protection, Folder Guard Lock or Folder in Windows XP?

  - by SonyAdi

  when I'm making a new partition by the partition magic. Then all of a sudden power failure. Unfortunately because my computer is not equipped with UPS (Power supply Uniterruptible), my computer finally died, too. When power is restored, I tried to turn on the computer. Suddenly my computer can not boot normally into windows. Option through safemode and others all I've tried. The result fails, can not boot at all, into safe mode also can not. And I know the cause. Partition Magic did not finish the work and stopped in the middle of the road and cause the transfer of data files or stopped, finally file2 any default windows were destroyed as well. Unfortunately my important data I store in my document. Finally, I take my hard drive to a friend. Hopes to open a computer hard drive through friend, at least I could save my important data, and then I can install window again by reformatting my hard drive is first. I read the hard drive in explorer my friend, complete with their data, but the data of my important data in my document can not get to go because it requires administrator privileges or the original user's default start my windows (my computer) to open my document folder tersebut.Ini actually very similar to the work or Folder Protection Folder Guard. result I was disappointed and almost desperate to get back my important data is. how do i break Folder Protection, Folder Guard Lock or Folder in Windows XP?

  Read the article

• OpenVPN-based VPN server on same system it's "protecting": feasible?

  - by Johnny Utahh

  Scenario: hosted machine (typically a VPS) serving wiki, svn, git, forums, email lists (eg: GNU mailman), Bugzilla (etc) privately to < 20 people. People not on team not allowed access. Seeking VPN-restricted access to said server. Have good user experience with OpenVPN-based servers/clients, but have yet to server-admin such systems. Otherwise, experienced Linux sysadmin. Target system: Ubuntu, probably 12.04. Seeking to put an OpenVPN process on above server to "protect" all the above-mentioned services, enabling only OpenVPN-authorized clients/processes to access above services. (Can easily acquire additional IP address(es) as needed for this setup.) Option: if absolutely needed, can employ an additional, dedicated, "VPN server" VPS simply to be my VPN server "front end." But prefer to have all server processes (VPN server plus other server apps) all running on same machine, if possible. Will consider further if dedicated-VPN-machine setup enables 1. easier installation/administration, 2. better/easier end-user experience, and/or 3. makes system significantly more secure. Any of above feasible? The main intention: create a VPN from purely-hosted resources, and not spend all the effort to make a non-VPN, secure site--which typically means "SSL wrapping" + all the continual webserver-application-update management. Let the VPN server deal with access security, and spend list time pushing said security "down" in the other apps/Apache.

  Read the article

• how to remove background layer of djvu file

  - by Jon

  Hello, I've downloaded some files from the Internet Archive. They come in different file formats and most of the time I use pdf. However, sometimes the scans are saves in colour instead of b/w. This makes it difficult/impossible to read on a dedicated ebook reader. In that case I downloaded the djvu files as on the PC you can select which layer (color, bw,fore,back) one would like to see. Selecting the bw gives excellent results. However, the ebook reader does not has this option. The question is, how can I remove /extract a layer from the djvu file and save only this layer. So far I've tried the following two approaches: 1) select bw in the djvu viewer on the PC and printed to postscript file. Followed by a ps2pdf conversion. This works, but generates a fairly large pdf file. Sure, I can again upload it to any2djvu but it just seems to much manual work for each file. 2) I tried the shared annotation feature and said (mode bw). This works on the PC as desired but is ignored on the ebook reader as the other layers are still present. Any help or suggestions would be greatly appreciated.

  Read the article

• Max. Temp. on Intel Burn Test for Stock Dell Precision T3500

  - by HK1

  I'm troubleshooting an issue on a Dell Precision T3500. As part of my troubleshooting I've decided to try running a stress test using Intel Burn Test software. This machine is a stock configuration with 12GB of RAM and a Xeon W3670 processor (nothing overclocked). When I run IBT using the standard mode, SpeedFan reports a processor temperature in excess of 80C. I've seen numbers as high as 90C but even at that temperature the machine does not become unstable or crash. However, it seems way too high. This processor has a TCase of 67.9C according to Intel's website. I'm guessing that means I'm in the danger zone any time I go over that temperature. I've checked the cooling system and everything looks fine. I've even took out the heat sink and reinstalled it with new thermal compound. This did not appear to make the problem better or worse. Is there a discrepancy somewhere here in the way temperatures are measured or displayed? I've also tried using HWMonitor from CPUID and it reports the same temperatures. Should I just let the Standard Test go and disregard the temperature outputs?

  Read the article

• "Access is Denied" when executing application from Command Prompt

  - by xpda

  Today when I tried to run an old DOS utility from the XP Command prompt, I got the message "Access is Denied." Then I found that most of the DOS utilities would not run, even though I have "full control" over them. They worked just fine a few weeks ago, and I have not made any OS changes other than Windows Upgrades. Then I tried running edlin.exe and edit.com from the Windows\system32 folder. Same result - "Access is Denied." I tried running these applications from Windows Explorer and got the message "Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item." I am logged in as a member of Administrators and have full control over these files. I tried logging in as THE Administrator, with no change. I checked the security settings on the files, and have full control over all of them. I have tried copying the files to different drives, booting in safe mode, and running without antivirus and firewall, all with no change. Does anybody know what could cause this?

  Read the article

• Application Virtualization

  - by Peter Versnee

  I have been looking for a solution to virtualize my desktop application as a SaaS. After picking Citrix XenApp as the best solution for my case and trying for ever to get it to work (with some more experienced people) I can't help but to conclude that Citrix has too much problems for my case. Every time I fix one thing some other thing pops up. As I can't imagine Citrix XenApp is the only way to deliver my application to my clients, I'd like to ask you experienced guys if you think there is an other way to deliver it whilst meeting my requirements. I've got no money issues - time on the other hand... My requirements: My application must run on a windows server; The application should be virtualized with the application window only (no desktop); Content Redirection (my application is the only one virtualized, so PDF, DOC(X) etc. is on the users' system); Easy user management; SSO;* Cross platform (Windows, Linux, Mac OSX).* I truly hope I don't annoy you with another of the same question. I've tried to find the same question here and - obviously - didn't found it. *) these I can live without, however very much appreciated

  Read the article

• What XMonad Configuration Best Replicates Default Ion3 Behavior and Feature Set?

  - by mtp

  Not being very familiar with Haskell and lamenting that Ion 3 is now abandonware, I am curious if anyone out there has found a way of replicating the default Ion 3 behavior and aesthetics in XMonad. If I can't have a near-exact replica of Ion 3-style behavior in XMonad, here is what would be critical to me: Virtual desktops that are empty by default and that spawn full-screen applications, which can be split horizontally or vertically evenly, leaving an empty adjacent pane. The panes, which house open windows, are manually resizable, preferably via keyboard. The panes exhibit tabbed behavior, meaning that they can house multiple windows. Windows can be tagged and moved between panes / virtual desktops via keyboard sequence. A given window may be temporarily exploded into full-screen mode via keyboard sequence. Each new virtual desktop starts in the same state—i.e., with one pane. Each virtual desktop may have its panes divided independently of other virtual desktops. From my investigation, it appears that there are several configurations that provide #3. For as much as I want to spend the time to familiarize myself with Haskell, I just simply don't have time. Any suggestions would be greatly appreciated. As far as I can tell, Ion has no conception of master pane or window, so this behavior is not desired.

  Read the article

• Regarding partitions for dual-booting Ubuntu with pre-existing Windows 7

  - by Shasteriskt

  I have zero actual experience with configuring disk partitions and the stuff I have read for the past few hours have been confusing me a bit, so please bear with me. First of all, I'd like to explain what I'm setting to achieve: Windows 7 with: C:\ Windows 7 (pre-existing installation) D:\ Data (Already exists and has files already) Ubuntu 11 - Does not exist yet, but I already have a LiveCD in hand. \root directory for Ubuntu \home on its own partition I plan \swap on its own partition with around 8GB Here is the current situation: I have a single 500 GB hard-disk with Windows 7 x64 installed, and the current partition schemes is as follows: System Reserved: 100 MB (Primary, Active) C: 100 GB - Where Windows 7 is installed (Primary) D: 365 GB - Where my files are located, LOTS of free space (Primary) Now, I would like to shrink my D: drive and create around 40 GB of unallocated disk space for the Ubuntu installation, but here what's confusing me a bit: I'm thinking I would create an extended partition and subdivide it into 3 logical partitions for the Ubuntu setup I had in mind. (If you think my setup is a bad idea, please let me know & why. I also hope you can suggest a better one...) I am aware that I can only have up to 4 primary partitions, or 3 primary partitions with 1 extended parition max. Now, does the System Recovery portion count as one primary partition? I'm really new to these things and it is totally unclear to me. In shrinking my D: drive using Windows 7's Disk Management tool, I would get an unallocated free space which I don't know how to make an extended partition from. It seems like I can only create a primary partition from it, not an extended one. How do I go about it? (I'd also like to note, if it is of any importance, that I am trying to avoid using the option to install Ubuntu alongside Windows, and much rather prefer using the custom install where I can specify which drives I wish to use and stuff. Somehow I feel its safer that way.)

  Read the article

• external drive and CentOS - Reset high speed USB device number

  - by Phil

  I have 2 external drives (3TB) and both will not work with my centOS Box. Tested them in windows ( different machine ) No problems ( 2.6.32-279.9.1.el6.i686 ) dmesg reports: usb 2-2: new high speed USB device number 3 using ehci_hcd usb 2-2: New USB device found, idVendor=2109, idProduct=0700 usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-2: Product: USB 3.0 SATA Bridge usb 2-2: Manufacturer: VIA Labs, Inc. usb 2-2: SerialNumber: 0000000000006121 usb 2-2: configuration #1 chosen from 1 choice scsi6 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning usb-storage: device scan complete scsi 6:0:0:0: Direct-Access ST3000DM 001-9YN166 CC4B PQ: 0 ANSI: 2 sd 6:0:0:0: Attached scsi generic sg3 type 0 sd 6:0:0:0: [sdd] Very big device. Trying to use READ CAPACITY(16). sd 6:0:0:0: [sdd] 5860533165 512-byte logical blocks: (3.00 TB/2.72 TiB) sd 6:0:0:0: [sdd] Write Protect is off sd 6:0:0:0: [sdd] Mode Sense: 00 06 00 00 sd 6:0:0:0: [sdd] Assuming drive cache: write through sd 6:0:0:0: [sdd] Very big device. Trying to use READ CAPACITY(16). sd 6:0:0:0: [sdd] Assuming drive cache: write through sdd: sdd1 sd 6:0:0:0: [sdd] Very big device. Trying to use READ CAPACITY(16). sd 6:0:0:0: [sdd] Assuming drive cache: write through sd 6:0:0:0: [sdd] Attached SCSI disk Tyring to use cfdisk / fdisk / gdisk or even fdisk -l results in the program hanging and dmesg reports: usb 2-2: reset high speed USB device number 3 using ehci_hcd usb 2-2: reset high speed USB device number 3 using ehci_hcd usb 2-2: reset high speed USB device number 3 using ehci_hcd I have the same 2 drives physically installed in the computer via SATA Any Ideas?

  Read the article

• VMWare Workstation 8 Disk I/O & Hard Faults

  - by Scott

  I have VMWare Workstation 8 installed on a host machine with the following specs: Intel i5 2500k CPU 16GB DDR3 1600 ram 1TB Western Digital Caviar Black HD I have two Windows 7 virtual machines configured (currently running one at a time but will be operating both at once when my 32GB RAM kit arrives in a couple days). Each one is configured with 8GB of RAM and no tweaks/performance customizations or anything done. All of the VMWare settings are the defaults. When I boot into these machines and run various programs (Visual Studio, Outlook, etc), I can hear the disk thrashing quite a bit and checking Resource Monitor, I can see that I'm getting anywhere between 300-800 hard faults per second. From the host machine, it shows they're coming from the VMWare image. If I go to the virtual machine, whatever app I'm currently loading is the image that's causing the hard faults. As I understand it, hard faults are (simply) when an address in memory has been swapped out to the page file and has to be read from the page file instead of from memory. I don't understand why this is happening though. With 8GB of ram on the guest machine and 6.5GB available, what could be causing this? I know Windows 7 supposedly improved on page file management over XP but it seems excessive for this kind of slowdown, disk thrashing and high hard fault count when I have that much free RAM. Is there anything I can to to improve the performance in my guest machines? On the host machine, I can open/run any applications at all and hard faults stays around 0 with low disk I/O.

  Read the article

• Managing rolling deployments in the cloud

  - by Josh Nankin

  Recently I've been experimenting with various cloud management tools like RightScale, Scalr, custom scripts for managing a variety of servers, each hosting several roles (app, db, load balancer, job queues, etc). The one thing I find lacking in most solutions is a way to do rolling deployments, i.e. running deployments sequentially across a number of servers with the same role. For instance, I dont want to build all of my webservers at the same time, as that will almost definitely result in some down time or 500s for my customers. I'd rather have one or two servers build at a time, while other servers are still available to handle requests. The other alternative is obviously to launch new servers that automatically update themselves on boot, but this isn't as cost effective, and most likely requires more time for the build to complete (it's faster to build on an existing server than to launch a new server and kill old ones). We've all heard of the big companies having the famous "push to build" button (companies like Twilio, Etsy, etc.) but it seems that they all have custom implementations of this. I'm not talking about a simple ssh-loop, clusterssh, or even an mcollective - I preferably want something with a nice simple interface that allows me to specify something like a RightScript or a Scalr script to run on a set of servers with a specific role, and it builds them sequentially. Does any one know of easy ways to get this done, or is this a candidate for a new open source project?

  Read the article

• Problem mirroring two monitors with different resolution

  - by quad

  Hello I am trying to put two monitors in mirror mode (Windows 7 Professional) with Ultramon 3.1.0. The two monitors: Main monitor: 24" Asus. 1680x1050 resolution (16/10). Secondary monitor: 19" LG. 1280x1024 resolution. The graphic card is a Nvidia GeForce 8600 GT. I have installed the Ultramon 3.1.0 and I have created a mirror, with the "stretch mirror image to fill monitor" and the "disable video overlays and 3D acceleration". When I start the mirroring, there are two zones in the lateral edges that are not displayed in the second monitor. I think this is because the width of the main monitor is 1680 px. and the width of the secondary monitor is 1280 px., but I have indicated "stretch mirror image to fill monitor" in the options. The same occurs in the top and the bottom edges, but the diference is minimal (1050 vs 1024 pixels). I want the same image (distortioned in the secondary monitor if is neccesary), but I don't know what is failing. Someone can help me, please? I have read Mirrored monitors of different resolution. Cloned screen on monitors with different resolutions

  Read the article

• fglrx-legacy-driver not seeing Radeon HD 4650 AGP

  - by Rocket Hazmat

  I am running Debian Squeeze on an old Dell Dimension 8300 box. It has an AGP Radeon HD 4650 card. I use this machine to mine bitcoins, and today I noticed that the machine had rebooted! My precious uptime! Anyway, my miner wouldn't start, so I figured might as well update my graphics driver, maybe that would fix the issue. I went to amd.com and downloaded the newest driver (12.6 legacy), but after installing it, aticonfig gave an error: aticonfig: No supported adapters detected I uninstalled the driver and figured I'd try to install it from apt. AMD has dropped support for the HD 4000 series in fglrx, forcing me to use fglrx-legacy-driver (currently only in experimental). In order to install this, I had to update libc6 (and some other important packages, like gcc), I had to use their wheezy versions. I finally got fglrx-legacy-driver installed, but I still got: aticonfig: No supported adapters detected Why isn't the driver finding my video card? I have a hunch it has something to do with the fact that it's an AGP video card. Here is the output of lspci -v (why does it say Kernel driver in use: fglrx_pci?): 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV730 Pro AGP [Radeon HD 4600 Series] (prog-if 00 [VGA controller]) Subsystem: Advanced Micro Devices [AMD] nee ATI Device 0028 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16 Memory at e0000000 (32-bit, prefetchable) [size=256M] I/O ports at de00 [size=256] Memory at fe9f0000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at fea00000 [disabled] [size=128K] Capabilities: [50] Power Management version 3 Capabilities: [58] AGP version 3.0 Kernel driver in use: fglrx_pci EDIT: fglrx 12.4 seems to work. Thing is, since I am on kernel 3.2, I need to apply this patch to common/lib/modules/fglrx/build_mod/firegl_public.c. I thought ATI dropped support for the 4xxx series after 12.4. Why doesn't 12.6 legacy work?

  Read the article

• Can I format a usb stick on windows xp, in HFS+ format, and make the usb stick mac os x bootable?

  - by user717236

  My Intel Mac OS X computer is corrupt and I feel, at this point, I need to perform a fresh install of the OS. It consistently and automatically logs out, right after I log in. I tried logging in as the root. I tried safe boot and it wouldn't load. Anyway, the point is I want put the Mac OS X installer on a USB thumb drive and have it boot up on the Intel Mac OS X computer. Unfortunately, the computer is inaccessible, as I mentioned above. So, I have a Windows XP machine that I'm using and attempting to create a bootable USB thumb drive that's compatible with Mac OS X. I have tried transmac, macdrive, and paradox for windows -- all of which proved unable to format the usb stick in HFS+. How do I know this? Well, even though the Transmac reports that's been formatted to HFS+, Computer Management in Windows says otherwise: I even put the installer on the usb drive, after transmac reportedly formatted it properly, and the mac os x computer didn't even recognize that a USB thumb drive was inserted, via pressing the option key at boot-up time. I'm not sure what the problem is and how to actually format the drive. Can anybody offer any help? I would appreciate it. Thank you.

  Read the article

• Starting multiple Chrome full screen instances on multiple monitors from (batch) script

  - by Bob Groeneveld

  My goal is to show different web content full screen on multiple monitors automatically after booting from a single computer. The browser I would like to use is Chrome. If Chrome does not support this and Firefox does that would be fine. The OS I would prefer is Windows, if it turns out that Linux is possible that would be fine. On Windows it is possible to set the position of the Chrome browser window (--window-position=) and make Chrome start in full screen mode (--kiosk). Using these options combined you can start Chrome full screen on any of the desktops/screens that you have connected to your computer. I have managed to get this working. However, if I then try to do the same thing a second time to have Chrome full screen on a second screen the second Chrome window will open over the first window, no matter the coordinates I use for the --window-position parameter. I have tried using Chrome profiles and copying the Chrome directory and starting the second chrome.exe. All these things result in the same behaviour.

  Read the article

• Ubuntu via Wubi refuses to show up in boot menu

  - by Redandwhite

  I'm in this strange situation: I have 3 partitions, one for Vista (C), one for Windows 7 (D), and one 10GB partition (E). At least that's how my original OEM Vista partition sees them. The primary OS that I boot into everyday is Windows 7. The situation is that for some reason it sees the Windows 7 partition (its own) as drive C, the 10GB one as (D) and the Vista one as (E). I've successfully used the Wubi installation before on Vista, but now it simply doesn't work. Ubuntu just does not show up in the boot menu, no matter what I try to do. I'm running out of ideas. I heard it doesn't really play well with Windows 7 either. I set it to Vista compatibility mode and that didn't work, I also tried installing it from Vista itself and that didn't work either for some reason. Any ideas what I should try? If anyone is about to suggest EasyBCD, please underline the command-line instructions I'm gonna need to follow. Thanks.

  Read the article

• Can't connect to Server Manager from Windows 7

  - by SAdmin317

  I have a Windows 7 Pro 64bit with SP1 desktop that has RSAT tools installed. I opened Server Manager and can't connect to the server (Server 2008 R2 core). I followed the guide to enable everything on the server, added a registry key to enable read-only on the device manager as well. On the Windows 7 PC I turned on winrm, did the quick config, and added the server IP and name as trusted hosts. I still get an error when connecting. "Connecting to the remote server failed with the following error message: The WinRM client cannot process the requests. If the authentication scheme is different from Kerberos, or if the client computer is not joined to a domain, then HTTPS transport must be used or the destination machine must be added to the TrustedHosts configuration setting...." I also added the name of the server to the windows 7 /etc/hosts file. Ping the server name translates to the IP of the server. Also opened up the firewall for "Remote Volume Management" Both machines are on the same Workgroup, using the same Administrator account, with the same password. Any help appreciated.

  Read the article

• Mesh Networked servers via vpn

  - by microspino

  I got a design idea and I would like to have some advice from SF about It. I have 5 customers with small real-estate databases. I've built for them a desktop app and now they would like to merge their database to share their data. I don't want to centralize everything in one place nor I want to do maintenance for servers. They told me also, that all of them in their offices, have little servers and maintenance guys available. Although everything seems suitable for web application, I had the idea to experiment something new: Any customer small-server wild be connected to the others in a sort of mesh network without a single point of failure and through VPNs. If one of the servers went down the customers could still connect to their databases from one of the other mesh networked servers instead of from the local one that is down. During normal operations all the servers sync the db with the others through VPNs. I can accept a half-day timing window of NON synched data, in other words, since I don't need real time synchronization, the server don't have to always stay in synch. I can migrate my data over to other Non-Sql technologies like CouchDB or Redis or whatever you suggest. As you can see I don't have a lot of constraints and although I could go with a web application I would like to delegate and decentralize support, data-privacy and management, as more as I can to my customers offices. Is that a crazy idea? Do you know If something similar exist? Which technology would you suggest?

  Read the article

• Recommended Smartphone for Reading PDFs [closed]

  - by mika

  This is as much a software than a hardware question. I use a lot of public transport and perhaps the best way to spend your time there is to read while listening to music. Currently I use Nokia E90 and Adobe Reader LE 2.5 (full version). I was wondering if there are any better alternatives? Requirements: at least 640px wide screen, preferably 800px physical size of the LCD display matters, it should be large, but the phone itself should be as small as possible. This favors touchscreen models PDF reader should be of high quality. It should render most PDFs correctly. Other important features include: full screen mode, keyboard controls for Page Down and page change, multiple zoom levels to adjust to the screen, opening recent documents at the last page read Downsides of E90 + Adobe Reader LE Phone is large compared to the display It is hard to read the display at sunlight Adobe Reader crashes the phone regularly, zoom could have more levels, doesn't remember last page EDIT: Switched to iPhone and GoodReader. Smaller physical screen width compared to E90 is a disimprovement, but other than that I'm happy. GoodReader is the highest quality smartphone PDF reader I've seen so far.

  Read the article

• Linux Cups raspberry pi offload processing to server

  - by jaredmsaul

  I am interested in setting up a raspberry pi as the local end of a printing solution. In my testing the pi chokes on acting as a complete cups based print server. It seems a little underpowered for some of the ghostscipt processing and other filtering that occurs-- particularly on larger or complex documents the processing time can be 5 or more minutes. My question is can the processing be largely done elsewhere and the prepared end product of the processing chain be fed to the pi for output on the connected printer? So in this scenario any arbitrary document (html, pdf, text) is initially 'printed' on a relatively powerful machine but the output is stored in a file. This file is then grabbed by the pi and with all the heavy work out of the way easily printed using cups. I know files can be pushed through cups in raw mode but I am fuzzy on the pros and cons and the applicability in what I describe. I have tested this with pdftops creating a ps file then feeding that raw to cups and I think it works but it seems like there may be a cleaner solution. This scenario would ideally work for any number of printer types.

  Read the article

• Synergy Windows 7 Screen Saver issue

  - by SynergyUser

  I have synergy server running on a Windows 7 laptop, I have another laptop running windows XP as the Client. When synergy is first started the Screen Saver will start after the 5 mins of inactivity no problem but after mouse/keyboard input then waiting another 5 minutes + the screen saver will not come back on. The mouse is on the server NOT the client. I have tried unchecking "sync screen savers" I have tried right clicking and running the synergy server as administrator. I have tried versions 1.3.4, 1.3.6, 1.4.2 both 32 bit and 64 bit. I have tried running in XP compatibility mode. I have tried disconnecting the client. It feels like I've tried everything. The setup is as follows: The server is below the Client, the client is above the server. The server has a secondary monitor attached to it and yes I've tried running without the secondary monitor. the sever is an acer 5552G-5828. Any help would be awesome! I love synergy but without the screensavers it is annoying. Thanks!

  Read the article

• Ubuntu Natty 11.04, Turning the wireless switch off; switches it off permanently!

  - by ZiGi

  i'm using an hp pavilion dv2000 i turned the wifi switch off by mistake, the LED turned orange and the wifi got disconnected. and now when i turn the switch on, it remains orange and the wifi still isn't functional. this happened before; i found a fix that worked searching google. it was done via terminal commands and i didn't have to download anything but i can't find the solution anymore! wlan0 shows up when i use: :~$iwconfig #BLA BLA BLA #... wlan0 IEEE 802.11abg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off more results: :~$ sudo ifconfig wlan0 up SIOCSIFFLAGS: Operation not possible due to RF-kill :~$ rfkill list all 1: phy0: WirelessLAN Soft blocked: yes Hard blocked: yes :~$ sudo rfkill unblock all :~$ rfkill list all 1: phy0: WirelessLAN Soft blocked: no Hard blocked: yes :~$ sudo ifconfig wlan0 up SIOCSIFFLAGS: Operation not possible due to RF-kill it's still hard blocked! even though the switch is turned on; gives the same result eitherways a direction to a page with a working solution is a much appreciated answer!

  Read the article

• Windows Explorer and UAC: run elevated

  - by syneticon-dj

  I am profoundly annoyed by UAC and switch it off for my admin user wherever I can. Yet, there are situations where I can't - especially if those are machines not under my continuous administration. In this case, I am always challenged with the task of traversing directories using my administrative user via the Windows Explorer where regular users do not have "read" permissions. The possible two approaches to this problem so far: change the ACLs to the directory in question to include my user (Windows conveniently offers the Continue button in the "You don't currently have permissions to access this folder" dialog. This obviously sucks since more often than not I do not want to change ACLs but just look into the folder's contents use an elevated cmd.exe prompt along with a bunch of command line utilities - this usually takes a lot of time when browsing through large and / or complex directory structures What I would love to see would be a way to run Windows Explorer in elevated mode. I have yet to find out how to do so. But other suggestions solving this problem in an unobtrusive way without changing the entire system's configuration (and preferably without the need for downloading / installing anything) are very welcome, too. I have seen this post with a suggestion for altering HKCR - interesting, but it changes the behavior for all users, which I am not allowed to do in most situations. Also, some folks have suggested using UNC paths to access the folders - unfortunately this does not work when accessing the same machine (i.e. \\localhost\c$\path) as the "Administrators" group membership is still stripped from the token and a re-authentication (and thus the creation of a new token) would not happen when accessing localhost.

  Read the article

• Power Outage Interrupted Upgrade from Windows Vista Ultimate to 7 Ultimate, Reverted to Vista, Now Vista is failing... What Next?

  - by tednewk

  I was in the midst of what seemed to be a successful upgrade from Vista Ultimate to 7 Ultimate when there was a brief blackout. The upgrade failed and Windows reverted back to Vista. Now Vista is very slow to boot, has problems waking back-up from inactivity and quickly loses it's wireless connection. The wake-up problem manifests itself as the mouse is clearly shown on a black screen but I have no access to the Desktop or Taskbar or Explorer. Even Alt-Ctrl-Delete doesn't seem to work. No task menu, no reboot. Hitting the reset button reboots the machine with the usual Black Screen warnings offering Safe Mode. I tried to do a system restore to a point before the upgrade. That didn't seem to work. My guess is that my system is a mutant with parts of Vista and parts of 7 crashing each other. I would like avoid a clean install if at all possible to avoid reinstalling other software. What should I try now? My thoughts are: My a system back-up to lock the computer in place Trying a second 7 upgrade If that appears to be working make another back-up If not reload back-up and try a repairing Vista from DVD. If that appears to work make another back-up, let system stablize about a week then try 7 install again If that doesn't work are there any other options to try before settling for a clean install? Another complication, I am doing this by "remote control". I'm traveling with my job and I'll be talking my son through it over the phone. (Kind of like the landing the 747 cliche from all the 70's adventure shows!) So is there a way of simplifying the steps? Thanks Ted

  Read the article

• Users getting 'flooded' with not read notifications (NRNs) for old emails and meeting requests

  - by Exile

  I'm being placed under quite a lot of pressure from senior management over a relatively trivial issue. Basically the vast majority of users are complaining that they receive not read notifications (NRNs) for old emails and meeting requests in large numbers multiple times a day. I know something strange is happening because some are delivered at silly times in the morning (i.e 3AM or 4AM). The problem I have is that these some of these NRNs are from meeting requests and messages that are 120 days old, so some users have deleted the original message so I don’t actually know if the NRN is from an email or meeting request. This is typical of what users receive as a NRN: From: Sender Sent: 23 March 2012 04:16 To: Recepient Subject: Not read: Accepted: Status update Your message To: Sender Subject: Accepted: Status update Sent: Wednesday, November 23, 2011 8:59:00 AM (UTC) Dublin, Edinburgh, Lisbon, London was deleted without being read on Friday, March 23, 2012 4:15:32 AM (UTC) Dublin, Edinburgh, Lisbon, London. ... From: Sender Sent: 18 March 2012 01:13 To: Recepient Subject: Not read: Gold delivery - Sourcing module Your message To: Sender Subject: Gold delivery - Sourcing module Sent: Friday, November 18, 2011 9:37:58 AM (UTC) Dublin, Edinburgh, Lisbon, London was deleted without being read on Sunday, March 18, 2012 1:12:37 AM (UTC) Dublin, Edinburgh, Lisbon, London. I have done a search and found the following: http://support.microsoft.com/kb/2544246 http://support.microsoft.com/kb/2471964 But we already installed 'Update Rollup 6 for Exchange Server 2010 Service Pack 1' back in December, so I am not sure what we can do to fix this?

  Read the article

< Previous Page | 748 749 750 751 752 753 754 755 756 757 758 759  | Next Page >